Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "contact angle" wg kryterium: Temat


Tytuł:
Adsorption of natural surfactants present in sea waters at surfaces of minerals: contact angle measurements
Autorzy:
Mazurek, A.
Pogorzelski, S.J.
Boniewicz-Szmyt, K.
Powiązania:
https://bibliotekanauki.pl/articles/48416.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
mineral
Baltic Sea
natural surfactant
solid-liquid interface
Gdansk Gulf
film pressure
contact angle hysteresis
film-covered surface
sea water
adsorption
Opis:
The wetting properties of solid mineral samples (by contact angles) in original surfactant-containing sea water (Gulf of Gdańsk,Ba ltic) were characterised under laboratory conditions on a large set (31 samples) of well-classified stones of diverse hydrophobicity using the sessile drop (ADSA-P approach),ca ptive bubble and inclined plate methods. An experimental relation between the static contact angle θeq and stone density ρ was obtained in the form θeq = Bρ + C,wher e B = 12.23 ± 0.92, C = −(19.17 ± 0.77),an d r2 = 0.92. The histogram of θeq distribution for polished stone plates exhibited a multimodal feature indicating that the most abundant solid materials (hydrophilic in nature) have contact angles θeq = 7.2,10. 7,15. 7 and 19.2◦,whic h appear to be applicable to unspecified field stones as well. The contact angle,a pH-dependent quantity,ap pears to be a sensitive measure of stone grain size,e.g . granite. The captive bubble method gives reproducible results in studies of porous and highly hydrophilic surfaces such as stones and wood. The authors consider the adsorption of natural sea water surfactants on stone surfaces to be the process responsible for contact angle hysteresis. In the model,an equation was derived for determining the solid surface free energy from the liquid’s surface tension γLV; it also enabled the advancing θA and receding θR contact angles of this liquid to be calculated. Measurements of contact angle hysteresis Δθ(= θA − θR) with surfactant-containing sea water and distilled water (reference) on the same stone surfaces allowed the film pressure ΔΠ (1.22 to 8.80 mJ m−2), solid surface free energy ΔγS (−17.03 to −23.61 mJ m−2) and work done by spreading ΔWS (−1.23 to −11.52 mJ m−2) to be determined. The variability in these parameters is attributed to autophobing,an effect operative on a solid surface covered with an adsorptive layer of surfactants. The wetting behaviour of solid particles is of great importance in numerous technological processes including froth flotation,d emulgation,an ti-foaming procedures and the coal industries. It is believed that the approach presented here and the examples of its application to common sea water/solid mineral systems could be successfully adapted to optimise several surfactant-mediated adsorption processes (see below) of practical value in natural water ecology.
Źródło:
Oceanologia; 2009, 51, 3; 377-403
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An effect of aromatic diluent addition on the selected properties of epoxy resin
Wpływ dodatku rozcieńczalnika aromatycznego na wybrane właściwości żywicy epoksydowej
Autorzy:
Hutera, B.
Drożyński, D.
Powiązania:
https://bibliotekanauki.pl/articles/263970.pdf
Data publikacji:
2005
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
kąt zwilżania
zwilżalność
spoiwo
contact angle
wettability
binder
Opis:
The article describes the studies which have been conducted on the dynamic wetting of quartz grains by EPIDIAN 5 resin and by this resin with an addition of 5 wt. %, 20 wt. % and 30 wt. % of xylene at different temperatures. In the case of the investigated resin, the wetting process dynamics is best described by a logarithmic function: theta = A Int + B0, where: theta is the contact angle after time t, and A and B0 are constants characteristic of this process at a given temperature. It has been proved that with 5 wt. % addition of xylene both constants assume a value different than zero. With addition of 20 wt. % and 30 wt. % of xylene, the State of equilibrium is reached almost immediately, and it is expressed by a zero value of constant A. The infrared spectroscopy did not reveal the presence of any chemical reactions between the EPIDIAN 5 resin and xylene, thus confirming that the chemical structure of xylene molecule affects the type of interaction and proves the non-active behaviour of xylene as a diluent. The importance of the studies for foundry sand practice has been stressed.
W artykule przedstawiono badania dynamiki zwilżania kwarcu przez żywicę EPIDIAN 5 z dodatkiem 5% wag., 20% wag. i 30% wag. ksylenu w różnych temperaturach. Dla przebadanej żywicy, proces dynamiki zwilżania najlepiej opisuje funkcja logarytmiczna: theta = - A Int + B0, gdzie: theta jest kątem zwilżania po czasie t, zaś A i B0 stałymi charakteryzującymi proces w danej temperaturze. Wykazano, że wartość obydwu stałych przy dodatku 5% wag. ksylenu jest różna od zera. Przy dodatku 20% wag. i 30% wag. uzyskuje się praktycznie natychmiastowy stan równowagi, któremu odpowiada zerowa wartość stałej A. Badania spektroskopowe w podczerwieni nie wykazały reakcji chemicznej pomiędzy żywicą EPIDIAN 5 a ksylenem, potwierdzając tym samym wpływ struktury chemicznej cząsteczki ksylenu na rodzaj oddziaływań i jego nieaktywny charakter jako rozcieńczalnika. Podkreślono wpływ przeprowadzonych badań dla praktyki mas formierskich.
Źródło:
Metallurgy and Foundry Engineering; 2005, 31, 2; 175-184
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation of continuous interaction process between air bubble and various roughness coal surfaces using microbalance
Autorzy:
Guo, Zhimin
Yang, Jianguo
Wang, Yuling
Powiązania:
https://bibliotekanauki.pl/articles/1450050.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
surface roughness
air bubble
contact angle
continuous interaction
Opis:
Surface roughness of particles plays an important role in bubble-particle interaction process. However, the continuous attachment and detachment process have rarely been characterized between the surface of different roughness and air bubble. In this study, the continuous attachment and detachment processes between the surface of different roughness and air bubble were investigated by a highly sensitive microbalance. The bubble–surface interaction process was monitored by a high-speed camera to analyze the geometry parameters, including distance, adhesion diameter, and contact angle. It was found that the bubble-particle attachment time increased with the increase of surface roughness. The magnitude of the repulsive force in the bubble-surface approaching process increased with the increase of surface roughness, while the attractive force in the bubble-particle retracting process decreased monotonically with the surface roughness. The force measured by microbalance was finally compared with the calculated one. The calculated force at the biggest force point also increased with the decrease of surface roughness. These results indicate that coal particles with lower surface roughness, which have less water-filled pores and pillars, is more conducive to flotation due to the lower repulsive force in the bubble-particle attachment process and higher adhesive force in the bubble-particle detachment process, and vice versa.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 11-23
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analityczny model obliczeniowy łożysk tocznych wieńcowych
The analytical calculation model of slewing bearings
Autorzy:
Krynke, M.
Powiązania:
https://bibliotekanauki.pl/articles/154819.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
łożyska toczne wieńcowe
kąt działania
rozkład obciążenia wewnętrznego
slewing bearing
contact angle
load distribution
Opis:
W pracy przedstawiono metodę obliczania nośności statycznej łożysk wieńcowych kulkowych dwurzędowych. Zaprezentowano analityczny model obliczeniowy bazujący na zastępowaniu części tocznych nieliniowymi sprężynami pomiędzy środkami krzywizn bieżni w ich przekroju osiowym. W rozważaniach uwzględniono występowanie w łożysku luzu osiowego i zmianę kąta działania elementów tocznych pod obciążeniem. Przeprowadzono analizę zmian obciążalności łożyska w zależności od obciążenia łożyska siłą promieniową.
The paper presents a method for calculating the static capacity of double row slewing ball bearings. An analytical calculation model based on replacement of the rolling elements with non-linear springs between the curves of the race center in the axial section is shown in Fig. 1. The result of the bearing load is displacement of the rings, defining the position of the curvature center of two races in relation to their initial position. Thus, action of external forces, followed by deformation of rolling elements, results in a change in their position and, consequently, deformation of springs located between the curvature race center. The considerations take into account the occurrence of the axial clearance in the bearing and variation of the contact angle of rolling elements under load. Figure 6 shows the scheme of program for automatic composing the characteristic of the bearing carrying capacity and also defines distribution of loads on individual rolling elements located along the circumference of the race. Also analysis of the bearing load capacity variation depending on the load bearing radial force is performed. The calculation algorithm discussed allows the preparation of the spatial characteristic of the slewing bearing load.
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 7, 7; 828-831
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza porównawcza zwilżalności oraz swobodnej energii powierzchniowej aorty i wybranych materiałów stosowanych w kardiochirurgii – badania wstępne
Comparative analysis of contact angle and surface free energy of aorty and selected materials used in cardiac implants - preliminary research
Autorzy:
Żelasko, A.
Mrowiec, A.
Światłoń, M.
Niedziela, E.
Walaszczyk, M.
Zielińska, E.
Łagan, S.
Powiązania:
https://bibliotekanauki.pl/articles/99231.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Katedra Biomechatroniki
Tematy:
implant kadriologiczny
zwilżalność
model Owens’a-Wendt’a
SEP
cardiological implants
contact angle
Owens-Wendt model
Opis:
Dla prawidłowego zachowania się materiału, który ma bezpośredni kontakt z krwią wymaga się by wykazywał on jak najmniejszą wartość SEP. Celem pracy była porównawcza ocena zwilżalności oraz swobodnej energii powierzchniowej aorty świńskiej i wybranych materiałów inżynierskich (węgiel pirolityczny, stop tytanu, stal 316L, poliuretan i NiTi) wykorzystywanych na implanty kardiologiczne. Dla aorty otrzymano SEP na poziomie 40[mJ/m2] zbliżone wartości do tkanki wykazały węgiel pirolityczny oraz NiTi. Metoda badawcza polegała na ocenie kąta zwilżania w procedurze siedzącej kropli na podstawie analizy jej kształtu. Wykorzystano model analityczny Owensa-Wendta.
The lowest possible value of SEP for proper behavior of material that is in direct contact with blood is required. The aim of the study was a comparative assessment of wettability and surface free energy of porcine aorta and selected engineering materials (pyrolytic carbon, titanium, 316L steel, polyurethane and NiTi) used for cardiac implants. For the aorta, SEP was obtained at the level of 40 [mJ/m2]. Similar values to tissue were demonstrated by pyrolytic carbon and NiTi. The research method consisted of measuring the contact angle in the static sessile drop procedure which was based on the analysis of its shape. The analytical model of Owens-Wendt was used.
Źródło:
Aktualne Problemy Biomechaniki; 2018, 16; 47-52
1898-763X
Pojawia się w:
Aktualne Problemy Biomechaniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the effect of assembly joints technology on the strength of adhesive joints of poly(methyl methacrylate) (pmma) used in advertising elements
Analiza wpływu technologii wykonania połączeń montażowych na wytrzymałość połączeń adhezyjnych polimetakrylanu metylu, stosowanych w elementach reklamowych
Autorzy:
Rudawska, Anna
Penkała, Piotr
Miszczuk, Bartosz
Stančeková, Dana
Powiązania:
https://bibliotekanauki.pl/articles/31232975.pdf
Data publikacji:
2023
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
adhesive joint
angular joint
poly(methyl methacrylate)
wettability
contact angle
strength
połączenie adhezyjne
połączenie kątowe
poli(metakrylan metylu)
zwilżalność
kąt zwilżania
wytrzymałość
Opis:
The aim of the article was to present issues related to the influence of the assembly joints technology (the type of adhesive material and the adhesive application) on the strength of the adhesive joints of poly(methyl methacrylate) (PMMA) used in the production of advertising elements. Angular adhesive joints, which are one of the types of joints made in the construction of advertising elements, were used in the study. The bonded material was poly(methyl methacrylate) (PMMA) of 8 mm thick. Two types of adhesives were used to make the adhesive joints: one-component solvent-based adhesives and methylene chloride as a solvent. Experimental tests determined the wettability of the surface of the adherends (with and without a protective coating) and the work of adhesion based on the measurement of the contact angle, as well as the strength of adhesive joints in accordance with the ISO 4578 standard. Based on the results of strength tests, it can be seen that the use of a solvent allows for obtaining equally strong joints as with the use of solvent-based adhesives. The purposefulness of using coatings protecting not only against dirt or mechanical damage in the form of scratches was also confirmed, but also the possibility of increasing (security) adhesive properties, defined in this case by wettability.
Celem artykułu było przedstawienie zagadnień związanych z wpływem technologii połączeń montażowych (rodzaju materiału klejącego i sposobu aplikacji kleju) na wytrzymałość połączeń klejowych z poli(metakrylanu metylu) (PMMA) stosowanych w produkcji elementów reklamowych. W badaniach wykorzystano połączenia klejowe kątowe, które są jednym z rodzajów połączeń wykonywanych w konstrukcji elementów reklamowych. Łączonym materiałem był poli(metakrylan metylu) (PMMA) o grubości 8 mm. Do wykonania połączeń klejowych zastosowano dwa rodzaje jednoskładnikowych klejów rozpuszczalnikowych oraz chlorek metylenu, jako rozpuszczalnik. W badaniach doświadczalnych określono zwilżalność powierzchni klejonych elementów (z powłoką ochronną i bez) oraz pracę adhezyjną na podstawie pomiaru kąta zwilżania, a także wytrzymałość połączeń klejowych zgodnie z normą ISO 4578. Na podstawie wyników badań wytrzymałościowych można stwierdzić, że zastosowanie rozpuszczalnika pozwala na uzyskanie połączeń równie wytrzymałych, jak przy zastosowaniu klejów rozpuszczalnikowych. Potwierdzono również celowość stosowania powłok zabezpieczających nie tylko przed zabrudzeniami czy uszkodzeniami mechanicznymi w postaci zarysowań, ale także w celu zwiększenia (zabezpieczenia) właściwości adhezyjnych, określanych w tym przypadku przez zwilżalność.
Źródło:
Technologia i Automatyzacja Montażu; 2023, 2; 3-10
2450-8217
Pojawia się w:
Technologia i Automatyzacja Montażu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Changes in the flotation kinetic of bituminous coal before and after natural weathering processes
Autorzy:
Xia, W.
Peng, Y.
Ren, C.
Xie, G.
Liang, C.
Powiązania:
https://bibliotekanauki.pl/articles/951864.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation kinetic
classical first-order rate constant
natural weathering processes
XPS
contact angle
Opis:
Natural weathering processes can make coal surface more hydrophilic due to the increase of content of hydrophilic functional groups (C-O, C=O, and COOH) and the decrease of content of hydrophobic functional groups (C-C and C-H) on coal surface, and hence the flotation recovery of fine coal is reduced. In this paper, a series of flotation tests were conducted in order to investigate the changes in the flotation kinetic of bituminous coal before and after natural weathering processes. Additionally, XPS was used to indicate the changes in surface properties of bituminous coal. In the investigations the flotation kinetic was changing. The classical first-order rate constant (k) of bituminous coal flotation was reduced after the natural weathering processes. A relationship between the classical first-order rate constant (k) and the hydrophilicity ability (HA) was given.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 401-410
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristic of polypropylene nanocomposite material reinforcement with hydroxyapatite for bone replacement
Autorzy:
Obaid, M. N.
Sabr, O. H.
Hussein, A. A.
Powiązania:
https://bibliotekanauki.pl/articles/1818801.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
polypropylene
hydroxyapatite
osteoplastic cells
surface roughness
contact angle
wettability
bone replacement
clots creation
coagulates creation
polipropylen
hydroksyapatyt
chropowatość powierzchni
kąt zwilżania
zwilżalność
substytut kości
tworzenie
Opis:
Purpose: Human bone suffered some degeneration due to age and accidents; therefore, there are many interests in the prepared synthetic bone with properties nearer to natural bone. The present study prepared a nanocomposite of polypropylene reinforced with different weight fraction of Nano hydroxyapatite (HAp) to be used as a bone replacement with good biological properties that enhanced the growth of osteoplastic cells and enhance the prevention of clots and coagulates creation. Design/methodology/approach: Nanocomposite from polypropylene reinforced with different weight fraction of Hydroxyapatite (HAp) (1,2 and 3) % prepared by first dispersion Nano hydroxyapatite insolvent and then mixing with a pellet of polypropylene by the twin-screw extrusion process, the current research study the surface properties ( atomic force microscopy (AFM), contact angle test) Moreover, it studied the characteristics of prepared nanocomposite materials (Differential Scanning Calorimetry (DSC), Field Emission-Scanning Electron Microscopy (FE-SEM) and Fourier Transform Infrared (FTIR)). Findings: The AFM results show the surface roughness decreased with increasing content of HAp, which diminished the chance of creation clots and coagulates on it. The contact angle results referred to polypropylene behaviour transformed from hydrophobic to hydrophilic with addition HAp that permission to grow the osteoplastic cell on it, so the healing process is accelerated. Moreover, the FE-SEM images revealed uniform distribution and good bonding between polypropylene and Hydroxyapatite. The thermal properties were measured by the DSC test showed the melting temperature, and the enthalpy of melting (indicated to increase the crystalline structure per cent) are increased with increasing the percentage of Hydroxyapatite. Research limitations/implications: This research studied the characteristics of nanocomposite materials prepared by three steps (dispersion by ultrasonic device, manually mixed and melting and mixing by twin extruder) which can be used as a bone replacement. However, the main limitation was the uniform distribution of nano-hydroxyapatite within the matrix. In a further study, the cytotoxic test can be tested to study the effect of prepared nanocomposite on living cells’ growth. Practical implications: The interest object is how to connect among different properties to prepared bone replacement with good properties and biocompatibility that made able to stimulate the growth and healing process. Originality/value: The nano-hydroxyapatite is a biomaterial that has a composition similar to the natural mineral phase of the bone and does not have any negative effect, which enhanced the growth of osteoplastic cells and decreased the clots and coagulates creation; therefore, nano-hydroxyapatite is used to decrease the surface roughness which decreased the chance of coagulation creation and to enhance the hydrophilic properties.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2021, 104, 1; 21--30
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of components and parameters of some sulfide minerals surface tension with regards to stability of mineral-air bubble system
Autorzy:
Jańczuk, Bronisław
Zdziennicka, Anna
Powiązania:
https://bibliotekanauki.pl/articles/1450639.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
contact angle
wettability
surface tension
detachment force
sulfide minerals
Opis:
The measurements of the advancing contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane on unoxidized and oxidized galena, pyrite, chalcopyrite, djurleite, bornite and covellite at the temperature equal 293 K were made. Additionally, the measurements of the force air bubble detachment from these sulfide minerals including also chalcocite in water were performed. Using the values of the obtained contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane the components and parameters of the unoxidized and oxidized sulfide minerals surface tension were calculated. For this calculation the van Oss et al. method was applied after analysis of the components and parameters of the surface tension of liquids used for contact angle measurements. Taking into account the contact angle of water on the sulfide minerals, the detachment force of air bubble from these minerals in water was determined using our equation and comparing to that of measured one. As follows from the measurements and calculations the wetting properties of sulfide minerals and the stability of mineral-air bubble depends to a larger extent on the degree of sulfide minerals oxidation than on the type of mineral.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 6; 22-31
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of contact angle measurement methods of liquids on metal alloys
Autorzy:
Terpiłowski, Konrad
Hołysz, Lucyna
Rymuszka, Diana
Banach, Robert
Powiązania:
https://bibliotekanauki.pl/articles/763967.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
metal alloys
wettability
contact angle
Opis:
The paper presents the studies of metal wettability using two methods: the sessile droplet and immersion ones. Based on the measured contact angles, there was calculated apparent surface free energy from the acidic–basic approach and the contact angle hysteresis. The advancing contact angles measured using the immersion method exhibit a little higher values than those measured by the sessile droplet method. The application of the immersion method leads to obtaining higher contact angle hysteresis. Both methods give different values of contact angles but they can be applied independently for estimation of metal surface wettability.
Źródło:
Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia; 2016, 71, 1
2083-358X
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of surface properties of anthracite coals before and after high temperature heating process
Autorzy:
Xia, W.
Xie, G.
Powiązania:
https://bibliotekanauki.pl/articles/951846.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
heating
coal hydrophobicity
XPS
SEM
BET
contact angle
Opis:
Surface property plays a very important role on coal hydrophobicity which determines flotation behavior of fine coals. However, coal spontaneous combustion makes coal suffer both oxidation and high temperature heating processes. Coals from the outside of coal piles primarily suffer oxidation (or combustion process) while coals from the inside of coal piles primarily suffer high temperature heating process. It is necessary to investigate the changes in surface properties of coal before and after high temperature heating process. In this investigation, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), surface area (BET) and contact angle measurements were used to indicate the changes in surface properties of anthracite coal before and after high temperature heating process. Throughout this study, surface properties of coal changed significantly after high temperature heating process. Meanwhile, coal hydrophobicity can be also reduced after high temperature heating.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 205-212
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Components and parameters of synthetic chalcocite surface tension and its wettability by aqueous solution of n-octyl-β-D-glucopyranoside
Autorzy:
Jańczuk, B.
Zdziennicka, A.
Powiązania:
https://bibliotekanauki.pl/articles/110743.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
contact angle
wettability
surface tension
chalcocite
n-octyl-β-D-glucopyranoside
Opis:
The measurements of advancing contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane and aqueous solution of n-octyl-β-D-glucopyranoside (OGP) on unoxidized and oxidized synthetic chalcocite at the temperatures equal to 293, 303 and 313 K were made. Using the obtained contact angle values of the pure liquids the components and parameters of the unoxidized and oxidized synthetic chalcocite surface tension were calculated. For this calculation, different methods based on the Young equation were applied. It follows that the surface tension of both forms of chalcocite does not practically depend on the temperature in the range from 293 to 313 K. Taking into account the calculated values of components and parameters of unoxidized and oxidized chalcocite surface tension their wettability by the aqueous solution of n-octyl-β-D-glucopyranoside was considered. It appeared that wettability of the unoxidized chalcocite by aqueous solution of OGP can be predicted on the basis of the chalcocite surface tension components and parameters.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 1; 19-30
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computational simulation analysis for torus radius of edge contact in hip prostheses
Autorzy:
Li, F.
Chen, H
Mao, K.
Powiązania:
https://bibliotekanauki.pl/articles/307414.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
staw biodrowy
endoproteza
kontakt Hertza
nacisk kontaktowy
hip prostheses
Hertzian contact
edge torus radius
contact pressure
contact dimensions
inclination angle
Opis:
Stripe wear occurs when the components of hip prostheses move a sufficient distance laterally to contact the edge of the acetabular cup, causing abnormally high contact stresses. In this research, edge loading contact of prosthetic hip is analyzed in the most commonly used material pairs. The contact dimensions and maximal contact pressure are investigated in mutative normal edge loading with 3 different inclination angles (15°, 20°, 25°) and in alterable edge torus radius with edge loading of 2500 N and inclination of 20°. A computational case was conducted for a 14 mm radius alumina ceramic bearing with a radial clearance of 0.1 mm using a normal edge loading ranged from 0 N to 3000 N. Additionally, the Hertzian theory successfully captures principal curvature trends of the edge torus on the influence of maximal contact pressure and obtains the appropriate edge radius range for lower maximal contact pressure. This work elucidates the methods of applying classical contact theory to design the edge radius of hip bearings to better resist severe edge loading contact stresses and reduce the stripe wear.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 3; 67-73
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Contact angle of copper-bearing shales using the sessile drop and captive bubble methods in the presence of selected frothers
Autorzy:
Szyszka, D.
Szczepański, W.
Powiązania:
https://bibliotekanauki.pl/articles/88891.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
contact angle
hydrophobicity
hydrophilicity
flotation
copper-bearing shales
Opis:
This paper describes the measurement of contact angle of copper-bearing shales. The values of advancing and receding contact angles were determined using the sessile drop and captive bubble methods in the presence of aqueous solutions of acetal and pyridine and distilled water. Both methods demonstrated that the tested substances had only minor impact on the surface hydrophobicity of copper-bearing shales expressed by contact angle. The tests carried out proved that neither acetal nor pyridine may be classified to the collecting reagents because none of them improves hydrophobicity of copper-bearing shales. These reagents are only flotation frothers.
Źródło:
Mining Science; 2015, 22; 191-199
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control of glass surface wettability via esterification with n-alkyl alcohols
Autorzy:
Kruszelnicki, Mateusz
Polowczyk, Izabela
Kowalczuk, Przemyslaw B.
Powiązania:
https://bibliotekanauki.pl/articles/2146948.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hydrophobicity
surface free energy
contact angle
zeta potential
roughness
Opis:
Surface wettability plays an essential role in many processes and materials applications. It depends mainly on the surface roughness and chemical composition, thus through a controlled modification of these parameters, the wettability can be restrained. Glass is an inorganic solid material, composed mainly of amorphous silica, which surface, due to the presence of reactive hydroxyl groups, can be quite easily chemically modified. This feature can be used to control the wettability of glass by reaction with organic compounds. In this study, the esterification of glass silanol groups with n-alkyl alcohols (Cn/H2n+1/OH, n=3, 4, 6, 8, 10) was employed to modify its wettability. The effect of such modification on the physicochemical properties of glass surface was comprehensively investigated and characterised by the water contact angle, surface free energy, zeta potential, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) measurements. We demonstrate that the wettability of the esterified glass surface is strongly dependent on both the chain length of used alcohol and modification time. The alcohol molecule binds to the glass surface through a Si-O-C bond, leading to the formation of a monolayer that does not significantly affect the surface morphology and zeta potential. Conducted studies provided a broader view of the influence of this technique for modifying surface wettability on its physicochemical properties.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 2; art. no. 145147
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies