Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "concrete waste" wg kryterium: Temat


Tytuł:
The estimated quantities of building demolition waste
Szacowanie ilości odpadów z rozbiórek kubaturowych
Autorzy:
Sobotka, A.
Sagan, J.
Radziejowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/230457.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odpady rozbiórkowe
model szacunkowy
odpady betonowe
budownictwo zrównoważone
demolition waste
estimate model
concrete waste
sustainable construction
Opis:
The aim of the article is to analyze existing foreign experiences presented in the literature in the field of estimating demolition waste and their applicability in Poland condition. Using the case study method for more than a dozen objects, the authors prove the necessity to verify the suitability of the proposed models in relation to regional conditions (e.g. climatic conditions, local technologies, etc.). The amount of concrete waste from demolition of objects made in the analyzed technology is characterized by a low coefficient of variation, especially in the case of public facilities and is only 10%. However, in the case of residential buildings, the volatility was 16,7%. The calculated average index of concrete waste was compared with the two literature models. The results obtained differ from the values obtained from the models. Based on an analysis of the advantages and disadvantages of the selected models and their assumptions, a proposal has been formulated for the development of an effective tool for estimating demolition waste taking into account regional specific conditions together with the concept of sustainable construction. The focus was on waste from demolition of concrete objects.
Prowadzenie efektywnej gospodarki odpadami ukierunkowanej na ich odzysk, jest realizacją współczesnej koncepcji zrównoważonego rozwoju. Podstawowym wymaganiem realizacji procesów odzysku odpadów jest ich selekcja. W przedsięwzięciach budowlanych prowadzenie prac rozbiórkowych w systemie dekonstrukcji z selekcją odpadów wiąże się z ponoszenie większych kosztów operacyjnych na etapie rozbiórki obiektu niżeli w przypadku klasycznego wyburzenia [8]. Selektywnie zebrane odpady dają jednak możliwość rekompensaty poniesionych kosztów na etapie gospodarowania nimi. Wartość surowców z odzysku jak i koszty utylizacji odpadów są zróżnicowane, stąd ważnym elementem przedsięwzięcia budowlanego polegającego na rozbiórce obiektu jest więc ocena ilościowa i jakościowa generowanych odpadów zgodnie z katalogiem odpadów [18]. W światowej literaturze przedmiotu można odnaleźć opracowane modele do szacowania ilości odpadów z rozbiórek obiektów i mają one dobre doświadczenia w tym względzie. Jednak, z uwagi na zmienne uwarunkowania klimatyczne, tradycje technologiczne, oraz przyjęte (krajowe) podejścia projektowe, możliwość zastosowania tych modeli w warunkach krajowych wymaga co najmniej ich weryfikacji. Celem artykułu jest analiza istniejących doświadczeń w zakresie szacowania odpadów. Skoncentrowano się na odpadach z rozbiórek obiektów betonowych. Stosując metodę „case study” dla kilkunastu obiektów, autorki w niniejszej publikacji dowodzą o braku możliwości bezkrytycznego zastosowania istniejących modeli szacowania odpadów do warunków krajowych.
Źródło:
Archives of Civil Engineering; 2019, 65, 1; 49-63
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element analysis on the flexural behaviour of concrete filled steel tube beams
Metoda elementów skończonych w badaniu właściwości stalowych kolumn
Autorzy:
Arivalagan, S.
Kandasamy, S.
Powiązania:
https://bibliotekanauki.pl/articles/280039.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
finite element analysis
concrete filled steel tubes
normal mix concrete
quarry waste concrete
Opis:
Concrete-filled steel tube (CFST) beams are studied and verified by the Finite Element program ANSYS against experimental data. In the nu- merical analysis, the cross sections of the CFST are square steel sections, and sections strengthened by being filled with normal mix concrete and quarry waste concrete. Numerical analyses have shown that for square CFST a good confining effect can be provided. This effect is enhanced especially by the filling.
W pracy przedstawiono analizę porównawczą wyników eksperymentalnych i otrzymanych z metody elementów skończonych (ANSYS) w odniesieniu do kolumn zbudowanych ze stalowych rur wypełnionych betonem (CFTS). Analizę numeryczną przeprowadzono dla kolumn o przekroju kwadratowym wzmacnianym normalną mieszanką betonową oraz betonem zawierającymodpady z kamieniołomu. Rezultaty symulacji numerycznych pokazały, że dla kolumn CFTS o przekroju kwadratowym uzyskuje się dobry efekt wzmocnienia wynikający z wypełnienia.
Źródło:
Journal of Theoretical and Applied Mechanics; 2010, 48, 2; 505-516
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowoczesne metody recyklingu betonu
Modern methods of concrete recycling
Autorzy:
Zając, B.
Gołębiowska, I.
Powiązania:
https://bibliotekanauki.pl/articles/2071333.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ścieranie kruszywa
kruszywo recyklingowe
metoda częściowej wymiany kruszywa
odpad betonowy
aggregate wear
surface improving agent
recycled aggregate
aggregate recycled method
concrete waste
Opis:
W artykule przedstawiono wyniki analizy najnowszych metod recyklingu betonu polegajŕcych na odzyskiwaniu oryginalnego kruszywa poprzez úcieranie zaczynu. Przytoczono przykůad praktycznego wykorzystania jednej z tych metod oraz wskazano kierunki rozwoju recyklingu na podstawie doúwiadczeń japońskich. Docelowo, efektem recyklingu betonu powinno byă kruszywo wysokiej jakoúci a recykling powinien byă powtarzalny.
The paper presents the evolution of concrete recycling through the last years. It is based on scientific literature and provides the example of vanced technology of concrete recycling. Aggregate produced according classical technology requirements has a limited application in building dustry. The newest Japanese technologies create a wider range of its appli tions and allow one to receive the high quality aggregate, which is obtaii via grinding of mortar from original aggregate.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 5; 136-137
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Waste Fines and Fibers on the Strength and Durability Performance of Silica Fume Based Reactive Powder Concrete
Autorzy:
Renisha, M.
Sakthieswaran, N.
Powiązania:
https://bibliotekanauki.pl/articles/2056305.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
coal bottom ash
waste concrete powder
silica fume
steel fibre
reactive powder concrete
thermal curing
mechanical properties
durability
performance
Opis:
The demand and consumption of conventional concrete materials is increasing day by day, which in turn leads to the extinction of natural resources. Certain researchers tend to draw a circle to solve this global problem by finding alternative materials satisfying all aspects, mainly efficiency, eco-friendly and economical. The present research work aimed to study the combined use of coal bottom ash (CBA) and waste concrete powder (WCP) in silica fume based reactive powder concrete (SF-RPC) subjected to thermal curing. The replacement of cement by silica fume was limited to 20% and the fine aggregate quartz sand replaced by CBA and WCP varied from 5% to 25% each. The material composition of SF-RPC involves the exclusion of coarse aggregates and the inclusion of finer materials with micro-steel fibers. The steel fibers played a significant role in order to obtain a ductile and stable product of SF-RPC. The experimental investigation on SF-RPC comprised of the determination of fresh concrete properties such as slump flow and the compaction factor, as well as mechanical properties like compressive strength, flexural strength and split-tensile strength. The study was also extended to investigate durability properties such as water absorption, sorptivity and resistance to acid attack. The results showed that silica fume proves to be a feasible alternative to partially replace cement and also that optimum incorporation of pre-treated and processed CBA and WCP attains better mechanical and durability performance without compromising the necessary qualities.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 1 (151); 43--49
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ecological aspect of waste concrete fines application as cement replacement in fine-grained composites
Autorzy:
Pawluczuk, E.
Powiązania:
https://bibliotekanauki.pl/articles/95643.pdf
Data publikacji:
2017
Wydawca:
Fundacja Ekonomistów Środowiska i Zasobów Naturalnych
Tematy:
odpad betonowy
recykling
aspekt ekologiczny
emisja dwutlenku węgla
waste concrete fine
recycling
ecological aspect
carbon dioxide emission
Opis:
Cement production is a very energy-intensive process which is responsible for around 5-8% of global carbon dioxide emission caused by human activity. Thus, replacing it with other materials is very beneficial for the environment. The paper presents the research on the use of a waste concrete fines which partially replaced cement in concretes. The fines was obtained in the thermal and mechanical treatment of concrete rubble. Then the research experiment considered the impact of two factors on selected physical and mechanical properties of the fi ne-grained concretes. These factors included: contents of the recycled fines (10, 20, 30% of cement’s mass) and its grinding time (0, 30, 60min). The results confirmed that the right technology enables the recycled fines to substitute 20% of the cement’s weight. Such activity allows energy saving compared to clinker and will also cover part of the ever-increasing cement demand – while protecting raw material.
Źródło:
Ekonomia i Środowisko; 2017, 3; 108-118
0867-8898
Pojawia się w:
Ekonomia i Środowisko
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected Properties of Reinforcing Composite Bars for Concrete Elements Prepared from Waste Polyethylene Terephthalate (PET) Bottles
Autorzy:
Katzer, Jacek
Grzybowski, Paweł
Kobaka, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/27315750.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
concrete
waste
polyethylene terephthalate
PET
reinforcement
Opis:
A concept of producing reinforcing bars for concrete elements from waste polyethylene terephthalate (PET) bottles is presented in the paper. The proposed technology of production harnesses strips of PET cut from bottles and thermal treatment. Finally, a sand-resin coating is applied to the composite bars. Produced bars can be differentiated by utilising different numbers of strips influencing the diameter of a bar. The key mechanical properties of the bars containing 3 to 8 strips were tested during the research program. Maximum loadings and displacements were established. Problems regarding the future application of the bars in question were discussed. Areas of need for further research were pointed out.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 188--197
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of polymer waste addition on the quality of concrete composite
Autorzy:
Pietrzak, Alina
Powiązania:
https://bibliotekanauki.pl/articles/34670830.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
concrete
polymer waste
concrete quality
beton
odpady polimerowe
jakość betonu
Opis:
Concrete is one of the most important construction materials, which, due to its properties, provides complete freedom in using it in construction, and thus in shaping the space. Despite numerous advantages (ease of use, high compressive strength, low production cost, resistance to high temperatures), it also has disadvantages, which include, first of all, low tensile strength and sensitivity to the destructive effects of chemical agents. The continuous increase in expectations regarding the improvement of concrete quality meant that concrete began to be modified, inter alia, with polymers to eliminate the above-mentioned disadvantages. This paper presents a review of articles on the possibilities of using polymer waste in concrete technology and their impact on the quality of the produced concrete composites.
Źródło:
Quality Production Improvement - QPI; 2021, 3, 1; 326-338
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Possibility of Using Extruded Polystyrene (XPS) Wastes to Make Lightweight Cement Composites
Autorzy:
Zegardło, Bartosz
Kobyliński, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/1955377.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
extruded polystyrene
XPS
waste aggregate
recycled concrete
Opis:
The paper presents the problem of utilization of extruded polystyrene wastes by its secondary use as filler for cement composites. Wastes were obtained from a company carrying out thermomodernisation works in the form of shapeless, undersized construction waste. The remains of the boards were crushed and separated using the sieve method. The basic technical parameters of thus prepared waste were assessed in terms of its use as a lightweight aggregate for concrete. The technical properties of wastes were compared with those of traditional aggregates used in concrete composites. During the research work, the samples of a cement composite were produced in which the waste served as a filler. In successive test series, the waste constituted 30, 50 and 100% of the aggregate substitution in the mix. Comparative samples without waste were also made. The results showed that the waste could potentially be used to produce lightweight cement composites with high strength parameters.
Źródło:
Journal of Ecological Engineering; 2021, 22, 7; 123-131
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of waste from utilitarian ceramics for production of cement mortar and concrete
Autorzy:
Ulewicz, M.
Halbiniak, J.
Powiązania:
https://bibliotekanauki.pl/articles/110320.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ceramics waste
cement mortar
concrete
mineral processing
Opis:
Preliminary results of utilization of ceramic waste for the produce of ceramic mortars and concrete have been presented. Currently, ceramic wastes from the production of ceramic flower pots and covers are not used in any form. The chemical composition of this waste materials was determined using X-ray fluorescence (spectrometer ARL Advant 'XP). Cement mortar and concrete were made using CEM I 42.5 R. The results showed that the compressive strength (after 28 days) of cement mortar increased with the increase of size reduction of the ceramic waste. The highest compressive strength (increased by 5.0% compared to the control sample) was found for cement mortars in which waste pottery with fragmentation of less than 0.2 mm were used. These mortars also showed the highest frost resistance (after 150 freeze and unfreeze cycles), whereas the largest decrease the compressive strength (over 17%) after the frost resistance test showed samples of the cement mortar with the ceramics waste fragmentation in range 1.0–3.0 mm. Studies have also shown that the compressive strength of concretes increase with added the ceramic waste (10–30%) instead of natural aggregate. The highest compressive strength (approximately 12.3%) compared with the sample control show the concrete in which 30% of the natural aggregates were replaced by the ceramics waste. Furthermore, using up to 30% of ground ceramic in the concrete reduces its water absorption capacity.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 1002-1010
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Rheological Properties of Cement Composites Based on Waste Materials
Autorzy:
Zakrzewski, Mateusz
Domski, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/27322945.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
cement composites
creep
steel cord
fiber-reinforcement concrete
long-term study
concrete beams
waste aggregate
waste fibers
crack
Opis:
This report presents the results and analysis of long-term properties of fiber-reinforced cement composite based on waste aggregate. The long-term tests were carried out on the stand proposed by the authors for simultaneously testing three beams with dimensions of 100x200x2900 mm. A total of 8 mixtures of cement composites with aggregate from ceramic waste and waste sand were tested. Three beams were made for each mixture. One without dispersed reinforcement and two with 0.5% and 1.0% fiber reinforcement ratios. As dispersed reinforcement, steel cord and hooked steel fibers were used. The beams were subjected to a four-point bending test. The research was carried out for 1000 days. An optical system was used as an innovative solution in long-term research. Based on the measurements, the creep coefficient in the mid-span of the beams was determined, and the crackings of the beams were analysed. The results obtained using manual measuring devices and the optical system were compared. A good convergence of measurement methods was observed. During the analysis of the results, the coefficients modifying the method for calculating the crack width included in Eurocode 2 were determined.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 159--173
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Processing and utilization of metallurgical slags
Autorzy:
Pribulova, A.
Futas, P.
Baricova, D.
Powiązania:
https://bibliotekanauki.pl/articles/111611.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
metallurgical slag
waste
concrete
cement
żużel hutniczy
odpady
beton
Opis:
Metallurgy and foundry industry create a huge amount of slags that are by-products by production of pig iron, steel and cast iron. Slags are produced in a very large amount in pyrometallurgical processes, and are huge sources of waste if not properly recycled and utilized. With rapid growth of industrialization, the available land for land-filling of large quantity of metallurgical slags is reducing all over the world and disposal cost becomes increasingly higher. Metallurgical slags from different metallurgical processes are treated and utilized in different ways based on the different slag characteristics. The most economic and efficient option for reducing the metallurgical waste is through recycling, which is a significant contribution to saving natural resources and reducing CO2 emissions characteristic of slags and their treatment and utilization are given in the paper. Slags from pig iron and steel production are used most frequently in building industry. From experiments using blast furnace slag and granulated blast furnace slag as grave an water glass as binder follows that the best results – the best values of compression strength and tensile strength were reached by using of 18% of water glass as solidification activating agent. according to cubic compression strength, mixture from 50% blast furnace gravel, 50% granulated blast furnace slag and 18% water glass falls into C35/45 class of concretes. This concrete also fulfils strength requirements for road concrete, it even exceeds them considerably and therefore it could find an application in construction of road communications or in production of concrete slabs.
Źródło:
Production Engineering Archives; 2016, 11, 2; 2-5
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwość zastosowania betonów modyfikowanych rozdrobnionymi odpadami gumowymi w budownictwie rolniczym
Possibility of using the concretes modified with the disintegrated rubber waste material in the argicultural building engineering
Autorzy:
Ołdakowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/271089.pdf
Data publikacji:
2012
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
beton
rozdrobnione odpady gumowe
concrete
disintegrated rubber waste material
Opis:
Rozdrobnione odpady gumowe pochodzące ze zużytych opon samochodowych znajdują różne zastosowanie już od wielu lat. Jedną z form zagospodarowania jest wykorzystanie "gumy" do produkcji betonów cementowych. Artykuł opisuje wybrane wyniki badań eksperymentalnych przeprowadzonych w celu oceny skutków dodania różnej ilości rozdrobnionej gumy do betonów cementowych wykorzystywanych w budownictwie rolniczym oraz porównanie modyfikowanego betonu z betonem zawierającym naturalne kruszywo piaskowo-żwirowe.
The disintegrated rubber waste material from used vehicle tyres are used in various ways for many years. One of methods of their utilization is use of "rubber" during cement concretes production. This article describes selected results of experimental research, performed in order to evaluate effects of adding various amounts of disintegrated rubber to the cement concretes, used in the agricultural building engineering, as well as comparing the modified concrete with the concrete containing natural sand and gravel aggregate.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2012, 17, 2; 61-68
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Contribution to the study of the durability of rubberized concrete in aggressive environments
Autorzy:
Kechkar, Chiraz
Belachia, Mouloud
Cherait, Yacine
Powiązania:
https://bibliotekanauki.pl/articles/396482.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
concrete
rubberized concrete
durability
waste
aggressive environments
beton
beton gumowo-asfaltowy
trwałość
odpady
środowisko agresywne
Opis:
Today, much of the world’s waste, in particular used tires, is accumulating as a potential source of major environmental and economic problems. In order to better preserve the environment, and in the face of changes in the legislation in force, many recovery actions have been carried out especially in the field of building materials. The present research aims to contribute to the study of the mechanical properties and durability of concretes based on rubber aggregates. To achieve this objective, we have contemplated incorporating therein amounts of rubber granules according to different volume substitution percentages being 10%, 17.5%, and 25%. A comparison of the results with a control concrete has been established. The obtained results make it possible to demonstrate that the substitution of a percentage of sand by rubber granules decreases the mechanical strengths and increases the expansion in water. On the other hand, it improves the resistance to attack from H2SO4, Na2SO4, and seawater. The latter is evaluated by the loss and gain in mass as well as the loss in mechanical resistance, especially in the long term (more than 90 days), decreases drying shrinkage, thus decreasing microscopic cracks and providing better durability.
Źródło:
Civil and Environmental Engineering Reports; 2020, 30, 1; 111-129
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie piasków odpadowych do wykonywania posadzek przemysłowych
Application of waste sands for making industrial floors
Autorzy:
Głodkowska, W.
Kobaka, J.
Powiązania:
https://bibliotekanauki.pl/articles/1819805.pdf
Data publikacji:
2009
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
piaski odpadowe
posadzki przemysłowe
beton
waste sands
industrial floors
concrete
Opis:
Beton jest najpowszechniej stosowanym budowlanym materiałem kompozytowym, do którego wytworzenia rocznie na świecie zużywa się 20 mld ton kruszywa. W przeliczeniu na każdego mieszkańca globu oznacza to zużycie 3 ton kruszywa rocznie [1]. Produkcja betonu może więc w sposób znaczący wpływać na środowisko naturalne. Do jego produkcji stosuje się mieszankę kruszywa grubego, najczęściej żwiru oraz drobnego, głównie piasku kwarcowe-go. Proporcje kruszywa grubego do drobnego w betonie zwykłym wynoszą w przybliżeniu 3:1. Jeżeli proporcje występowania tych składników w miejscu ich pozyskiwania byłyby podobne lub składniki te występowałyby oddzielnie, ich wydobycie przebiegałoby bezodpadowo. Na obszarze geograficznym Polski, a w szczególności w regionie Pomorza tak jednak nie jest. Przyjmuje się, że około 90% złóż kruszyw grubych znajduje się w regionie południowym Polski, 6% w regionie środkowym i tylko 4% w regionie północnym [2]. Powoduje to deficyt kruszyw gruboziarnistych w regionie północnej Polski.
Concrete is the most commonly known composite material used in civil engineering, thus concrete production influences significantly the natural environment especially in developing countries. The main component of cement composite is aggregate which covers from 60% to 80% of cement composite volume. Global annual production of concrete, mortar and other cement based composites consumes 20 billion tonne of different aggregate. It means that about 3 tonne of aggregate is used per person per year. The production of ordinary concrete usually consumes coarse aggregate (e.g. gravel) and fine aggregate (e.g. sand) in weight proportion approximately equal to 3:1. If the weight proportion of the occurring of coarse aggregate and fine aggregate in a specific geographical region were close to 3:1, then the production of cement composites would be entirely balanced and would be carried out without any aggregate waste. Unfortunately, natural resources of coarse and fine aggregates can be found in very different weight proportions. For example, natural aggregates in Pomerania region in Poland are of glacial origin and they occur in a form of sands and all-in-aggregates. Production of ordinary concrete based on such, locally available fine aggregate is hindered. High transport costs of coarse aggregate from distant pit deposits (often over 200km) to the production facility, force producers to use the process of hydroclassification of natural all-in-aggregate in order to receive coarse aggregate. Approximately half of documented deposits of aggregate in the Pomerania region is constituted by deposits hydroclassified during the exploitation. Process of hydroclassification allows to divide all-in-aggregate into coarse aggregate and fine aggregate. Waste fine aggregate is a by-product of hydroclassification process. Because of a huge deficit of coarse aggregate in the region, coarse aggregate obtained during hydroclassification of all-in-aggregate is constantly being sold and always on demand enlarging heaps of waste sand. In the paper an issue of waste sand utilization was raised. Various civil engineering applications of waste fine aggregate cement composites have proved that meticu-lously made fine aggregate cement composite is characterized by satisfactory strength and durability in order to be applied in civil engineering as a standard construction ma-terial. One of examples how to resolve the waste sand utilization problem could be its application for the production of steel fiber reinforced mineral composites used for industrial floors. The authors introduced their tests results based on selected properties of fine aggregate fibrous composites with different amounts of steel fiber. The study is a small part of a broad research program.
Źródło:
Rocznik Ochrona Środowiska; 2009, Tom 11; 193-206
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Próba wdrożenia do produkcji parapetów z recyklatem poliestrowo-szklanym
Application of glass reinforced polyester waste in window sills production
Autorzy:
Jastrzębska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2071405.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
odpady poliestrowo-szklane
polimerobeton
glass reinforced polyester waste
polymer concrete
Opis:
W pracy przedstawiono wyniki półtechnicznych badań poliestrowych parapetów z odpadami poliestrowo-szklanymi. Badano ich wytrzymałość na ściskanie i zginanie oraz nasiąkliwość wodą. Stwierdzono, że lekkie betony żywiczne z odpadami poliestrowo-szklanymi mogą posłużyć do otrzymywania ozdobnych materiałów wykończeniowych.
Results of semi-technical research of window sills with glass reinforced polyester waste were presented in the paper. Window sills bending strength, compressive strength and water absorbability were tested. Application of glass reinforced recyclate to lightweight polymer concrete allows one to obtain a new decorative materials.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 5; 49-50
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies