Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "concrete corrosion" wg kryterium: Temat


Tytuł:
Degradation of the concrete railway track bed located in the vicinity of the loading wharf
Autorzy:
Niedostatkiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/259953.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
concrete corrosion
damage to the concrete substructure
concrete repair
Opis:
The following article describes the damages of the concrete railway track bed at the place of unloading petroleum products located in the immediate vicinity of the cargo berth. The concrete of the track bed has been a subject to degradation as a result of many years of exploitation resulting, inter alia, in its cyclical flooding of petroleum products during the unloading and loading of rail tankers. Repairs carried out in the previous period involving the reprofiling of the top part of the board proved to be ineffective. Methods of repairing existing damages have been proposed. Due to the need to limit the time of excluding the track from operation, the repair works were divided into two stages - ad hoc, intended for urgent implementation, and target, to be carried out as a major overhaul.
Źródło:
Polish Maritime Research; 2018, 4; 149-153
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion of Steel in Concrete - Modeling of Electrochemical Potential Measurement in 3D Geometry
Autorzy:
Filipek, R.
Szyszkiewicz-Warzecha, K.
Szczudło, J.
Powiązania:
https://bibliotekanauki.pl/articles/352732.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
reinforced concrete corrosion
3D modeling
non-destructive testing
Opis:
The paper presents a 3D model and simulations of corroding reinforcement bars in a concrete element. Electric potential distributions are calculated in the concrete matrix and on its surface for two rebars arrangements with one or three active (anodic) sites to assess the reliability and identify possible problems when standard test measurements for corrosion assessment in concrete structures are used and conclusion on the corrosion state is inferred. The values of the potential strongly depend on a concrete layer thickness and beyond the threshold of 5-7 cm it is hardly possible to detect the number of active sites on the rebar. Also conductiv-ity – which is not constant in real world constructions – is an important factor. Thus without estimation of the state of concrete it is difficult to draw reliable conclusions on the corroding activity from shear potential measurements on the surface.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 117-124
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulation of chemo-mechanical degradation of concrete and its impact on RC structures bearing capacity
Numeryczna symulacja chemomechanicznej degradacji betonu i jej wpływu na nośność konstrukcji
Autorzy:
Zaborski, A.
Powiązania:
https://bibliotekanauki.pl/articles/971824.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
concrete
concrete corrosion
chemo-mechanical degradation
chemical degradation
mechanical damage
numerical simulation
building material
Opis:
Durability of engineering structures depends on the structure itself and environmental conditions. Aggressive substances can penetrate concrete matrix causing chemical degradation of material skeleton. At the same time the material is exposed to mechanical exertion which contributes to additional deterioration. This work attempts to analyze chemo-mechanical degradation of concrete from phenomenological point of view using numerical simulation. Diffusion of corrosive species was determined through local diffusion parameters and balance equations with sources and outfl ows prescribed by stoichiometry of chemical equations and reaction extent constant. Degradation of concrete was described with use of an additive scalar damage parameter adopting adequate evolution equations. The cellular automata method used is shown to be an effective calculation method. Contour lines of species concentration and partial damage parameter values were obtained using numerical simulation of the processes in 2D space. As expected, progressive degradation of concrete decreased bearing capacity of the RC section. Numerical simulation of residual cross-section strength was obtained by use of short-time destructive loading tests.
W niniejszej pracy analizuje się sprzężenie chemiczno-mechanicznego uszkodzenia materiału poprzez symulacje numeryczne procesów transportu i degradacji materiału. Transport substancji agresywnych opisany został równaniami dyfuzji z członem źródłowym określonym równaniem stechiometrycznym i stałą szybkości reakcji. Degradację betonu określa skalarny parametr uszkodzenia z równaniami ewolucji uszkodzenia chemicznego i mechanicznego. Do rozwiązania równań dyfuzji zastosowano automaty komórkowe, otrzymując warstwice koncentracji substancji i parametru zniszczenia. Nośność rezydualna przekroju została oszacowana na podstawie numerycznej symulacji testów niszczących, uzyskując obraz zmieniających się krzywych interakcji sił przekrojowych. Numeryczna symulacja potwierdziła wpływ synergicznego oddziaływania obciążenia mechanicznego i środowiskowego na degradację betonu oraz spadek nośności przekroju żelbetowego.
Źródło:
Acta Scientiarum Polonorum. Architectura; 2014, 13, 4
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Action of chlorides on concrete elements of an indoor swimming pool
Oddziaływanie chlorków na elementy betonowe krytej pływalni
Autorzy:
Owsiak, Z.
Szymkiewicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/402268.pdf
Data publikacji:
2015
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
chloride corrosion of concrete
chlorkowa korozja betonu
Opis:
The article presents the laboratory tests – based assessment of the condition of concrete elements in the indoor swimming pool. The test were performed on samples extracted from the swimming pool floor. The results from the tests for physical and chemical properties of the concrete as well as for the chloride content in the samples allowed that moisture content varied from layer to layer. This facilitates the movement of water and chloride penetration. The amount of chlorides in the layer located below 80 mm depth exceeds the threshold value 0.4%, which may initiate corrosion of the reinforcement steel.
Źródło:
Structure and Environment; 2015, 7, 3; 112-117
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zabezpieczenie strukturalne i powierzchniowe betonu w słupach elektroenergetycznych i oświetleniowych
Structural and surface protection of concrete in power engineering and lighting columns
Autorzy:
Kubiak, J.
Łodo, A.
Michałek, J.
Powiązania:
https://bibliotekanauki.pl/articles/163617.pdf
Data publikacji:
2012
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
słup elektroenergetyczny
słup żelbetowy
korozja betonu
ochrona przed korozją
ochrona powierzchniowa
ochrona strukturalna
power line pole
reinforced concrete pole
concrete corrosion
corrosion protection
surface protection
structural protection
Opis:
W artykule podano zalecenia i wymagania dotyczące ochrony strukturalnej i powierzchniowej betonu w strunobetonowych i żelbetowych żerdziach stosowanych do wykonywania konstrukcji wsporczych w napowietrznych liniach elektroenergetycznych i w słupach oświetleniowych.
In the paper the recommendations and requirements concerning the structural and surface protection of concrete in prestressed pre-tensioned and reinforced concrete poles for executing supporting structures of overhead power engineering lines and lighting columns are given. On the basis of the analysis of literature, standards and many years of experience of applying such structures the conclusions and recommendations were defined. They concern designing and executing of power engineering and lighting columns for 30 and 50 years of exploitation period without maintenance and surface protections of concrete.
Źródło:
Przegląd Budowlany; 2012, R. 83, nr 5, 5; 103-107
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmiany nośności przekroju żelbetowego wynikające z postępującej degradacji chemiczno-mechanicznej betonu
Change of bearing capacity of RC crosssection due to progressive chemomechanical degradation of concrete
Autorzy:
Zaborski, A.
Powiązania:
https://bibliotekanauki.pl/articles/162005.pdf
Data publikacji:
2014
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
żelbet
przekrój
nośność
środowisko agresywne
korozja betonu
postęp korozji
kinetyka procesu
degradacja
symulacja numeryczna
reinforced concrete
cross-section
bearing capacity
corrosive environment
concrete corrosion
corrosion progress
process kinetics
degradation
numerical simulation
Opis:
Artykuł przedstawia symulację numeryczną degradacji przekroju żelbetowego w wyniku korozji betonu. Oddziaływanie środowiska agresywnego na materiał określa się z równań bilansu ośrodka wieloskładnikowego i uproszczonego równania kinetyki procesu korozji. Skalarny parametr uszkodzenia opisuje zarówno efekty kruchego pękania (zarysowania) w strefach uplastycznienia, jak i „tension softening”. Równania przepływu, jak i synergistyczne oddziaływanie obu rodzajów degradacji modelowane jest numerycznie z użyciem automatów komórkowych. Zmiany nośności przekroju znajdują odzwierciedlenie w postępującej modyfikacji krzywych interakcji sił przekrojowych.
The paper presents a numerical simulation of RC cross-section degradation due to concrete corrosion. The influence of corrosive environment on material is determined from balance equations of multicomponent continuum and simplified kinetic equation of process. A scalar parameter of damage describes effects of brittle cracking in plastic zones as well as tension softening. Simulation of transport equations and material degradation is modelled by means of cellular automata. The change of cross-section bearing capacity explains continuous modifications of interaction curves for cross-sectional forces.
Źródło:
Przegląd Budowlany; 2014, R. 85, nr 5, 5; 73-75
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Destrukcja żelbetowego komina przemysłowego spowodowana błędami technologii prac remontowych
Destruction of a reinforced concrete industrial chimney caused by technological errors in repair work
Autorzy:
Kamiński, M.
Ubysz, A.
Powiązania:
https://bibliotekanauki.pl/articles/163583.pdf
Data publikacji:
2012
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
komin przemysłowy
komin żelbetowy
prace remontowe
błąd technologiczny
wykładzina ceramiczna
uszkodzenie
korozja betonu
industrial chimney
reinforced concrete chimney
repair works
technological error
clay liner
damage
concrete corrosion
Opis:
Referat pokazuje zakres prac remontowych jednego z użytkowanych kominów żelbetowych oraz skutki braku koordynacji tych prac. W podsumowaniu autorzy zwracają uwagę na błędy mogące towarzyszyć takim remontom oraz najważniejsze elementy, na które należy zwracać uwagę przy projektowaniu tego typu napraw.
This paper describes the scope of repair work carried out on an operational reinforced concrete chimney and the consequences of lack of coordination of that work. In their summary the authors draw attention to errors which may be made in the course of such work and the most important elements to be taken into consideration when planning repairs of this type.
Źródło:
Przegląd Budowlany; 2012, R. 83, nr 5, 5; 55-58
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Destrukcja konstrukcji stropu żelbetowego w zakładzie przemysłowym jako skutek nieprawidłowej eksploatacji obiektu
Destruction of the structure of reinforced concrete roof in an industrial plant, as the result of improper use the building
Autorzy:
Buczkowski, W.
Kowalski, J.
Powiązania:
https://bibliotekanauki.pl/articles/161635.pdf
Data publikacji:
2009
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
budynek przemysłowy
konstrukcja żelbetowa
strop żelbetowy
środowisko korozyjne
korozja betonu
korozja zbrojenia
stan techniczny
technologia naprawy
industrial building
RC structure
RC roof
corrosive environment
concrete corrosion
reinforcement corrosion
technical condition
repair technology
Opis:
Opisano stan zniszczenia podstawowych elementów konstrukcyjnych hali żelbetowej [stropy, żebra, podciągi i płyty dachowe), przedstawiono model korozyjnego niszczenia stali i betonu oraz zaproponowano sposób wykonania napraw.
The article describes the condition of damaged basic structural elements of a hall made of reinforced concrete (ceilings, reinforcing ribs, binding joists, and roof slabs) and presents a model of corrosive destruction for steel and concrete. It also proposes repairing methods.
Źródło:
Przegląd Budowlany; 2009, R. 80, nr 5, 5; 49-53
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Agresywność wód gruntowych w świetle wumagań normy PN-EN 206-1. Odniesienia do obszarów zurbanizowanych na przykładzie aglomeracji warszawskiej
Groundwater aggressiveness in relation to the requirements of PN EN 206-1 standard. References to urban areas on the example of the Warsaw agglomeration
Autorzy:
Patakiewicz, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/40732.pdf
Data publikacji:
2016
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
aglomeracja warszawska
tereny zurbanizowane
hydrogeochemia
wody gruntowe
wody czwartorzedowe
norma PN-EN 206-1
beton
korozja betonu
korozja chemiczna
agresywnosc korozyjna
Warsaw agglomeration
urbanized area
hydrogeochemistry
ground water
Quaternary water
PN-EN 206-1 standard
concrete
concrete corrosion
chemical corrosion
corrosive aggressiveness
Źródło:
Acta Scientiarum Polonorum. Architectura; 2016, 15, 4
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Procesy korozyjne w wieżach chłodniczych – badania stali zbrojeniowych w środowisku wody chłodniczej, uzdatnionej solami amonowymi
Corrosion processes in cooling towers
Autorzy:
Szymura, T.
Adamczyk, W.
Powiązania:
https://bibliotekanauki.pl/articles/391195.pdf
Data publikacji:
2013
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
układy chłodnicze
woda chłodnicza
korozja metali
korozja żelbetu
inhibitory korozji
Cooling water
corrosion metals
corrosion concrete construction
cooling system
inhibitors
Opis:
Przeprowadzono badania korozji stali zbrojeniowych w uszkodzonych płaszczach chłodni kominowej w środowisku wody chłodniczej, uzdatnianej związkami siarczanu i chlorku amonu. Badania prowadzono normową metodą grawimetryczną i elektrochemiczną z wykorzystaniem potencjostatu. Badania wykazały, że odporność korozyjna w roztworach zawierających sole amonu o stężeniu 0,15 mola/dm3, obliczona na podstawie szybkości korozji, była podobna i wyniosła 6 (w skali od 1 do 10). Stal S235JRG2 wykazała nieco wyższą odporność w tych środowiskach.
Corrosion testing was performed on structural steel of a cooling tower in the environment of cooling water containing ammonium sulfates and ammonium chloride. The test were performed using gravimetric and electrochemical methods with the application of a potentiostat. The analyses clearly showed that the corrosion rate is higher in solutions that contain ammonium sulfate and that the S235JRG2 steel exhibits higher corrosion resistance in this environment.
Źródło:
Budownictwo i Architektura; 2013, 12, 3; 231-238
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Działanie chlorków na ulegający dekalcyfikacji zaczyn cementowy
Chloride ions action on decalcifing cement paste
Autorzy:
Słomka-Słupik, B.
Zybura, A.
Powiązania:
https://bibliotekanauki.pl/articles/131508.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Komisja Inżynierii Budowlanej PAN Oddział w Katowicach
Tematy:
dekalcyfikacja
chlorki
korozja betonu
trwałość
fazy
mikrostruktura
chlorides
corrosion of concrete
durability
phase
microstructure
Opis:
The paper presents the problem of progress diffusion of chloride ions into the hydrated cement paste with simultaneously changing of discontinuities and crystalline phases’ amount depending on the distance from the external layer of the sample as a result of interaction mechanism of ammonium chloride with the paste. Experience confirmed the disappearance of lime phases of the hydrated cement paste and capillaries widening during NH4Cl diffusion. Friedel’s salt, formed before, and constituting a buffer before reinforcement corrosion, also dissolved during process of pH lowering. The described corrosion process is rapid due to the releasing of ammonia gas from the reaction medium.
Źródło:
Roczniki Inżynierii Budowlanej; 2016, 16; 5-16
1505-8425
Pojawia się w:
Roczniki Inżynierii Budowlanej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ceiling damage due to swelling of slag aggregate in Teriva concrete filler blocks
Uszkodzenia stropu spowodowane pęcznieniem kruszywa żużlowego w pustakach Teriva
Autorzy:
Hebda, L.
Owsiak, Z.
Powiązania:
https://bibliotekanauki.pl/articles/402413.pdf
Data publikacji:
2017
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
beam-and-block floor systems
slag concrete filler block
internal corrosion of concrete
strop gęstożebrowy
pustak żużlobetonowy
korozja wewnętrza betonu
Opis:
The paper reports an example of damage to a Teriva floor slab system. The bottom section of the concrete filling block and the ceiling plasterwork broke away. No symptoms were observed to indicate excessive deformation and/or displacements in the structure of the building. Laboratory tests revealed that the damage occurred on account of internal corrosion of concrete due to periclase swelling. The mineral was a component of the slag aggregates used for the production of the floor blocks. The factor initiating the corrosion process was most probably an increase in relative humidity in the rooms covered with the floor system, resulting from a change in the intended use. The damage occurred after over 10 years’ damage-free service period. Swelling of periclase led to the failure of the concrete filler blocks in the Teriva beam-and-block floor system.
W referacie przedstawiono przykład awarii stropu teriva w budynku mieszkalnym wielorodzinnym, polegającej na odpadaniu dolnych ścianek pustaków oraz wystąpieniu odspojeń tynku na suficie. Awarii tej nie towarzyszyły żadne objawy wskazujące na nadmierne odkształcenia lub/i przemieszczenia konstrukcji budynku. Z przeprowadzonych badań laboratoryjnych wynika, że awaria ta powstała w wyniku korozji wewnętrznej betonu, spowodowanej pęcznieniem peryklazu. Minerał ten znazł się w kruszywie żużlowym zastosowanym do produkcji pustaków stropowych. Czynnikiem inicjującym proces korozyjny był najprawdopodobniej wzrost wilgotności względnej w pomieszczeniach przekrytych stropem w wyniku częściowej zmiany sposobu użytkowania. Zjawisko ujawniło się po przeszło 10 latach bezawaryjnej eksploatacji budynku. Pęcznienie peryklazu spowodowało destrukcję pustaków w stropie gęstożebrowym teriva.
Źródło:
Structure and Environment; 2017, 9, 3; 199-206
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of biogenic sulphate corrosion of concrete in sewage treatment plant settling tank walls
Autorzy:
Krysiak, Łukasz
Falaciński, Paweł
Szarek, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/396770.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
corrosion of concrete
sulphate corrosion
wastewater management
environmental protection
case study
korozja betonu
korozja siarczanowa
gospodarka ściekowa
ochrona środowiska
studium przypadku
Opis:
One of the basic threats in terms of concrete used for tanks or ducts applied in wastewater management is the phenomenon of biogenic sulphate corrosion (BSC). BSC is a particular case of corrosion caused by the action of sulphuric acid (IV), which is formed as a result of a number of biochemical processes, which can take place, e.g. in an environment encountered within the aforementioned structures. Ions present in sulphuric acid react with cement hydration products, which leads to replacing the primary cement matrix components with compounds easily-soluble or highly-swelling during crystallization. The outcome of advanced corrosion is usually an observed formation of a white, amorphous, sponge-like mass, which is easily separated from the underlying concrete. The article discusses a case study of a BSC process in a newly constructed primary settling tank in a municipal wastewater treatment plant.
Źródło:
Civil and Environmental Engineering Reports; 2020, 30, 3; 253-264
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie rdzeniowych próbek betonu do badania korozyjnej degradacji żelbetowych kominów przemysłowych
Application of concrete core samples to investigations of corrosive degradation of reinforced concrete chimneys
Autorzy:
Barycz, S.
Oruba, R.
Powiązania:
https://bibliotekanauki.pl/articles/269360.pdf
Data publikacji:
2006
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
kominy żelbetowe
korozja
concrete chimneys
corrosion
Opis:
W wyniku wieloletniej eksploatacji konstrukcje nośne żelbetowych kominów przemysłowych ulegają przyspieszonemu zużyciu naturalnemu i korozji. W artykule przedstawiono problem badania korozyjnej degradacji wysokich kominów żelbetowych z zastosowaniem betonowych próbek rdzeniowych. Na podstawie wieloletnich doświadczeń opisano zasady doboru miejsc badawczych oraz sposób pobierania próbek za pomocą specjalnej wiertnicy z koronką diamentową. Przedstawiono także zakres badań próbek betonowych pobieranych z trzonów kominów, które umożliwiają dokonanie analizy statyczno-wytrzymałościowej i oceny bezpieczeństwa kominów żelbetowych.
Structures of industrial chimneys corroded in the result of long operating. Application of concrete core samples to investigations of corrosive degradation of high reinforced concrete chimneys was presented in the paper. It is the most reliable method to evaluation of technical condition of this objects. Principles of designation of testing places and procedures of sampling by use boring machine with diamond bit were described on the base of many years practice. Physical, chemical and strength laboratory tests of concrete samples were given. Results of this tests makes possibilities for structural analysis and operational safety evaluation of reinforced concrete chimneys.
Źródło:
Inżynieria Środowiska / Akademia Górniczo-Hutnicza im. S. Staszica w Krakowie; 2006, 11, 2; 183-193
1426-2908
Pojawia się w:
Inżynieria Środowiska / Akademia Górniczo-Hutnicza im. S. Staszica w Krakowie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wentylacja w wybranych obiektach inżynierii wodnej
Autorzy:
Małecki, Z. J.
Borowski, G.
Powiązania:
https://bibliotekanauki.pl/articles/407540.pdf
Data publikacji:
2010
Wydawca:
Instytut Badawczo-Rozwojowy Inżynierii Lądowej i Wodnej Euroexbud
Tematy:
wentylacja
korozja stali i betonu
karbonatyzacja betonu
obiekty inżynierii wodnej
ventilation
corrosion of steel and concrete
carbonation of concrete
water engineering facilities
Opis:
Czynnikami mającymi wpływ na samopoczucie ludzi w obiektach inżynierii wodnej to przede wszystkim: czystość i świeżość powietrza, temperatura i wilgotność powietrza, stężenie zanieczyszczeń gazowych (chemicznych). Wzrost wilgotności względnej powietrza powoduje zwiększenie tempa korozji stali i betonu oraz przyspiesza proces karbonatyzacji betonu. Stosowanie wentylacji w obiektach inżynierii wodnej zmniejsza procesy degradacji fizycznej w obiektach budowli stalowych i betonowych (żelbetowych). Ponadto odprowadzenie zysków ciepła z pomieszczeń, poprawia sprawność urządzeń mających tendencje do przegrzewania się (turbiny, silniki elektryczne, sprężarki powietrza, pompy etc.).
Źródło:
Zeszyty Naukowe. Inżynieria Lądowa i Wodna w Kształtowaniu Środowiska; 2010, 2; 7-23
2082-6702
Pojawia się w:
Zeszyty Naukowe. Inżynieria Lądowa i Wodna w Kształtowaniu Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Osobennosti vozvedenija koppozionnostojjkikh shakhtnykh stvolov glubokogo zalozhenija na dejjstvujushhikh setjakh vodootvedenija
Features erection of corrosion mine shafts deep foundations on existing networks of water removals
Autorzy:
Goncharenko, D.
Olejjnik, D.
Kajjdalov, V.
Powiązania:
https://bibliotekanauki.pl/articles/76987.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
drainage
polymer concrete
polyethylene
construction
concrete technology
deep foundation
corrosion resistance
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2014, 16, 6
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność na korozję chlorkową podwodnego betonu naprawczego dojrzewającego w warunkach oddziaływania ciśnienia hydrostatycznego
Chloride corrosion resistance of underwater repair concrete in terms of the cutting effects of hydrostatic pressure
Autorzy:
Horszczaruk, E.
Brzozowski, P.
Rucińska, T.
Powiązania:
https://bibliotekanauki.pl/articles/390202.pdf
Data publikacji:
2013
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
betony podwodne
ciśnienie hydrostatyczne
korozja
underwater concrete
hydrostatic pressure
corrosion
Opis:
W pracy przedstawiono wyniki badań podwodnego betonu naprawczego dojrzewającego w warunkach zmiennego ciśnienia hydrostatycznego, poddanego oddziaływaniu mgły solnej. Badania przeprowadzono zgodnie z normą PN-EN 14147. Próbki betonu do badań korozyjnych pobrano z elementów próbnych, które przez okres pierwszych 7 dni dojrzewały w zbiorniku ciśnieniowym i poddane były oddziaływaniu ciśnienia hydrostatycznego o wartościach od 0,1 do 0,5 MPa. Stwierdzono korzystny wpływ ciśnienia hydrostatycznego na odporność korozyjną badanego betonu. Próbki pobrane z warstw przypowierzchniowych badanych elementów wykazały nieznacznie większą odporność na działanie chlorków co znalazło potwierdzenie w badaniach charakterystyki rozkładu porów badanych betonów.
The paper presents the results of the study of underwater repair concrete under the effect of the salt mist. The research was conducted in accordance with the standard PN-EN 14147. Concrete samples for testing the corrosive elements of that test were taken during the first 7 days of insight in the pressure vessel and were subjected to hydrostatic pressure effects from 0,1 to 0,5 MPa. The beneficial effect of hydrostatic pressure on the corrosion resistance of tested concrete repair was. Was observed samples taken from the surface layers of the tested elements showed slightly higher resistance to chlorides which confirmed the characteristics of pore distribution of concrete in the studies.
Źródło:
Budownictwo i Architektura; 2013, 12, 3; 161-168
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Organiczne związki fosfinowe, jako inhibitory korozji stali zbrojeniowej w betonie skażonym jonami chlorkowymi
Phosphinium compounds as corrosion inhibitors for reinforcement in chloride-rich environments
Autorzy:
Klakočar-Ciepacz, M.
Kotlarz, M.
Falewicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/161871.pdf
Data publikacji:
2014
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
beton
korozja zbrojenia
chlorki
inhibitor korozji
związek fosfinowy
concrete
reinforcement corrosion
chlorides
corrosion inhibitor
phosphinium compound
Opis:
W artykule przedstawiono wyniki badań metodą potencjodynamiczną i spektroskopii impedancyjnej (EIS) skuteczności ochrony przed korozją stali zbrojeniowej w roztworze symulującym ciecz porową betonu skażonego jonami chlorkowymi za pomocą opracowanego preparatu inhibitorowego. Preparat inhibitorowy jest mieszaniną kwasu dietyloaminometylo( heksa-metylenoiminometylo)fosfinowego, kwasu cytrynowego i siarczanu cynku. Stwierdzono, że opracowany preparat inhibitorowy chroni przed korozją stal zbrojeniową ze skutecznością 66,6% (obniża szybkość korozji do wartości 0,014 mm/rok), a charakter jego działania jest mieszany katodowo-anodowy.
The effectiveness of corrosion protection of the dietyloaminometylo(heksametylenoimino-metylo)phosphine acid and its mixture with citric acid and zinc sulfate in a pore simulating solution with Cl- ions for reinforcing bar was calculated by use both methods: the pototentiodynamic test and impedance spectroscopy (EIS). The effectiveness of corrosion protection for reinforcing bar by developed inhibitive mixture is 66.6% (corrosion rate 0,014 mm/yr.). The inhibitive mixture behaves as mixed inhibitor: cathodic-anodic.
Źródło:
Przegląd Budowlany; 2014, R. 85, nr 5, 5; 40-42
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ochrona katodowa jako aktywny sposób zabezpieczenia konstrukcji żelbetowej
Cathodic protection as an active method for protecting a reinforced concrete structure
Autorzy:
Hebda, L.
Berger, K.
Powiązania:
https://bibliotekanauki.pl/articles/163469.pdf
Data publikacji:
2012
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja żelbetowa
korozja
zabezpieczenie antykorozyjne
ochrona katodowa
reinforced concrete structure
corrosion process
corrosion protection
cathodic protection
Opis:
W pracy przedstawiono skrótowo przebieg procesu korozji stali zbrojeniowej w betonie z uwzględnieniem reakcji elektrochemicznych na powierzchni stali. Omówiono metody ochrony katodowej, rozwiązania technologiczno-materiałowe stosowane w praktyce, wymagania stawiane w normach w odniesieniu do kompetencji personelu zajmującego się wykonywaniem instalacji ochrony katodowej. Przedstawiono prewencyjne zabiegi w stosunku do betonu, wykorzystujące procesy elektrochemiczne, a polegające na realkalizacji otuliny betonowej i ekstrakcji z niej jonów chlorkowych. Przytoczono też przykłady wykonania instalacji ochrony katodowej w różnych obiektach w latach 2005 – 2011.
This article gives a brief description of the process of corrosion of reinforcing steel in concrete, noting the electrochemical reactions occurring on the steel’s surface. Methods of cathodic protection are described, as well as technological and material solutions applied in practice, and requirements laid down in standards regarding the competences of installers of cathodic protection. A presentation is made of methods of preventative treatment of concrete using electrochemical processes, involving the re-alkalization of the concrete casing and extraction of chloride ions from it. Examples are also given of installation of cathodic protection in various structures in the years 2005–2011.
Źródło:
Przegląd Budowlany; 2012, R. 83, nr 6, 6; 33-35
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zestaw pomiarowy GP-5000 GalvaPulseTM jako przykład aparatury wykorzystywanej do oceny procesu korozji zbrojenia w betonie
The GP-5000 GalvaPulseTM Set-up as an example of the apparatus used in assessing the corrosion of reinforcement in concrete
Autorzy:
Raczkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/270295.pdf
Data publikacji:
2014
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
beton
zbrojenie
korozja
pomiary nieniszczące
concrete
reinforcement
corrosion
non-destructive measurements
Opis:
W artykule przedstawiony został zestaw pomiarowy GP-5000 GalvaPulseTM – rodzaj aparatury badawczej, która jest pomocna przy ocenie stopnia zaawansowania procesu korozji zbrojenia w betonie. Zestaw ten wykorzystywany jest w badaniach nieniszczących metodą pomiaru impulsu galwanostatycznego. Za pomocą urządzenia GP-5000 GalvaPulseTM możliwy jest jednoczesny pomiar trzech parametrów: potencjału stacjonarnego zbrojenia, rezystywności otuliny betonowej oraz gęstości prądu korozyjnego. Zmierzone wartości tych parametrów, odniesione do pewnych wartości granicznych, pozwalają na ocenę procesu korozyjnego prętów zbrojeniowych w betonie. W artykule przedstawiono również metodykę prowadzenia pomiarów z wykorzystaniem zestawu GP-5000 GalvaPulseTM.
The article presents a set GP-5000 GalvaPulseTM for measuring – type of test apparatus, which is helpful in assessing the severity of the corrosion process of the reinforcement in concrete. This set is used in non-destructive testing method for measuring the galvanostatic pulse. Using GP-5000 GalvaPulseTM it is possible to measure simultaneously three parameters: the potential of stationary reinforcement, resistivity of concrete cover and corrosion current density. The measured values of these parameters related to certain limits allow for the evaluation of the rebar corrosion in concrete. This paper presents the methodology of measurements using the set of GP-5000 GalvaPulseTM.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2014, 19, 1; 85-91
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Durability-Related Field Inspection Data from Concrete Bridges Under Service
Autorzy:
Konečný, P.
Lehner, P.
Vořechovská, D.
Šomodíková, M.
Horňáková, M.
Rovnaníková, P.
Powiązania:
https://bibliotekanauki.pl/articles/351362.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
reinforced concrete bridges
field inspection
carbonation process
chloride ingress
corrosion risk
Opis:
The level of de gradation of reinforced concrete bridges was evaluated based on the in-situ measurements performed on five reinforced concrete bridges under service located in the Czech Republic. The combined effect of carbonation and chlorides with respect to the corrosion of steel reinforcement, namely the pH and the amount of water-soluble chlorides, were evaluated on drilled core samples of concrete. Based on these parameters, the ratio between the concentrations of Cl- and OH, which indicates the ability of concrete to protect reinforcement, was calculated. All the data were statistically summarized and the relationships among them were provided. The main goal of this study is to evaluate the non-proportional effect of the amount of chlorides per mass of concrete on the risk of corrosion initiation and to localize the “critical” locations in the bridges that are the most affected by the degradation effects.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 81-89
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined effect of carbonation and chloride aggression: degradation of reinforced concrete structures
Autorzy:
Kim, L. V.
Shalyi, E. E.
Leonovich, S. N.
Budrevich, N. A.
Powiązania:
https://bibliotekanauki.pl/articles/111117.pdf
Data publikacji:
2018
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
structure
concrete
corrosion
carbonation
chloride aggression
struktura
korozja
agresja chlorkowa
beton
Opis:
Corrosion reinforcement marine hydraulic structures due to chloride aggression and carboniza-tion of concrete leads to a sharp decrease in the safety of the structure. The steel reinforcement will be subjected to a so-called depassivation process, once the chloride concentration on surface exceeds a certain threshold concentration, or the pH value in the protective layer of concrete de-creases to a threshold value due to carbonation. Electrochemical reactions begin to occur with the formation of corrosion products with the penetration of oxygen on the steel reinforcement surface. This leads to cracking of the protective layer of concrete. It should also be taken into account that, due to corrosion mechanisms, the cross-sectional area of the reinforcement also decreases. The article suggests a method for predicting the complex degradation of reinforced concrete structures, taking into account various mechanisms of corrosion wear, which will allow developing effective ways to improve the durability and maintainability of structures operated in the marine environment.
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2018, 3-4; 78-86
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Znaczenie rozpoznania procesów degradacji betonu w odniesieniu do obiektów infrastruktury kolejowej
Significance of degradation processes in concrete recognition with respect to the objects of railway infrastructure
Autorzy:
Bazarnik, M.
Powiązania:
https://bibliotekanauki.pl/articles/248606.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
infrastruktura kolejowa
degradacja betonu
korozja siarczanowa
railway infrastructure
concrete degradation
sulphate corrosion
Opis:
Infrastruktura kolejowa w Polsce w wyniku wieloletnich zaniedbań, wymaga szeregu działań naprawczych. Obecnie ma być realizowany Wieloletni Program Inwestycji Kolejowych do roku 2015, który ma wpłynąć na poprawę jakości infrastruktury kolejowej. W celu uniknięcia błędów instytucjonalnych, przyczyniających się do degradacji obiektów należy przeanalizować wpływ warunków środowiskowych na długoterminową integralność i okres użytkowania infrastruktury.
Due to many years of neglecting the railway network in Poland, it requires a number of corrective actions of railway infrastructure. Currently the "Multiannual Programme of Railway Investment by 2013" will be carried out, and it is expected that the programme allows for improving the quality of rail infrastructure. In order to avoid institutional errors, that contribute to the degradation of the objects the impact of environmental conditions on the long-term integrity and infrastructure service life, should be analysed.
Źródło:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne; 2013, 3(102); 21-27
1231-9171
Pojawia się w:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion of RC beams during time
Autorzy:
Blikharskyy, Yaroslav
Khmil, Roman
Blikharskyy, Zinoviy
Powiązania:
https://bibliotekanauki.pl/articles/103955.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
corrosion
aggressive environment
reinforced concrete beam
korozja
agresywne środowisko
wzmacnianie belki betonowej
Opis:
This article presented results of impact corrosion on reinforce concrete beams during time with previous loading. Before testing the RC beams were loaded by 37% and 75% from bearing-capacity load of undamaged corrosion beams. There were tested two types of beams. First type beams were tested under force loading action and second type beams were tested under force loading and corrosion action. As an aggressive environment were used the 10% solution of sulfuric acid H2SO4. Such environment takes place in separate chemical manufactures, galvanic workshops, flue pipes of thermal power plants. The results of experimental studies have established that the effect of the aggressive environment with simultaneous loading significantly impairs the stress-strain state of reinforced concrete beams. Bearing capacity due to the yielding of reinforcement bars for specimens with the simultaneous action of aggressive environment and previous loading of 37% and 75% takes place on 51…53 and 58…60 days. The destruction of these specimens, by crushing compressive concrete, at previous loading 37% occurred after 75…79 and at previous loading 75% - after 79…88 days. The history loading does not impact significantly on beams failure, on finite deflections and timing exhaustion bearing capacity since the start of the simultaneous action of aggressive environment and loading.
Źródło:
Quality Production Improvement - QPI; 2019, 1, 1; 311-318
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ odchyłek grubości otuliny betonowej na przewidywaną trwałość konstrukcji żelbetowych
The impact of concrete cover thickness deviations on expected reinforced concrete elements durability
Autorzy:
Tworzewski, P.
Powiązania:
https://bibliotekanauki.pl/articles/160490.pdf
Data publikacji:
2017
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
żelbet
otulina betonowa
grubość otuliny
statystyka
trwałość konstrukcji
korozja zbrojenia
ryzyko korozji
prognoza trwałości
reinforced concrete
concrete cover
cover thickness
statistics
structure durability
reinforcement corrosion
corrosion risk
durability forecasting
Opis:
W artykule przedstawiono wyniki badań mające na celu oszacowanie wpływu odchyłek grubości otuliny na przewidywaną trwałość. Analizę oparto na pomiarach wykonanych podczas inwentaryzacji położenia zbrojenia podłużnego w wybranych przekrojach 43 belek. Badane elementy zostały wykonane w zakładzie prefabrykacji i wszystkie nieprawidłowości wynikały z błędów popełnionych na etapie ich wykonania. W pracy przedstawiono wyniki analizy rozkładu wyznaczonej odchyłki grubości otuliny betonowej z uwzględnieniem jej położenia w przekroju elementu oraz oszacowano ich wpływ na przewidywaną trwałość elementów.
This paper presents an attempt to assess the impact of concrete cover thickness deviations on expected durability. The analysis is based on the inventory of rebars position in beams cross-section performed for 43 elements. The elements were made in the precast factory and all errors were made at the stage of manufacturing. The paper presents the results of distribution analysis of determined concrete cover deviations (analysis takes into account location of those deviations in the cross-section of the element) and assessment of the impact of concrete cover thickness deviations on expected durability.
Źródło:
Przegląd Budowlany; 2017, 88, 11; 52-55
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda szacowania natężenia prądu korozyjnego na podstawie ugięcia elementów żelbetowych
Method of estimation of corrosion current based on deflection of reinforced concrete elements
Autorzy:
Recha, Faustyn
Powiązania:
https://bibliotekanauki.pl/articles/38173613.pdf
Data publikacji:
2022
Wydawca:
Wyższa Szkoła Techniczna w Katowicach
Tematy:
korozja stali zbrojeniowej
ugięcie elementów żelbetowych
prąd korozyjny
corrosion of reinforcing steel
deflection of reinforced concrete element
corrosion current
Opis:
W pracy podjęto problematykę ugięcia elementów żelbetowych, podlegających wpływom korozji zbrojenia. Praca ma charakter w pełni teoretyczny. Skupiono się na wyprowadzeniu zależności, wiążącej gęstość natężenia prądu korozyjnego z krzywizną ugięcia. W zamyśle przedstawionej metody jest to nowy element, umożliwiający wstępne oszacowanie gęstości prądu korozyjnego w oparciu o bezinwazyjne pomiary ugięć konstrukcji.
The study takes into account the problem of deflection of reinforced concrete elements subject to the influence of reinforcement corrosion. The work is fully theoretical. The focus was on deriving the dependence linking the corrosion current density with the deflection curvature. In the concept of the presented method, it is a new element that enables preliminary estimation of the corrosion current density based on non-invasive measurements of structure deflections.
Źródło:
Zeszyty Naukowe Wyższej Szkoły Technicznej w Katowicach; 2022, 14; 57-64
2082-7016
2450-5552
Pojawia się w:
Zeszyty Naukowe Wyższej Szkoły Technicznej w Katowicach
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Predicting changes of the state of a bridge reinforced with concrete superstructures in view of operational changes
Autorzy:
Ovchynnykov, Pavlo
Dubinchyk, Olha
Tiutkin, Oleksii
Kildieiev, Vitalii
Sedin, Volodymyr
Bikus, Kateryna
Powiązania:
https://bibliotekanauki.pl/articles/395920.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
bridge
superstructure
reinforced concrete
reinforcement
concrete creep
cracks
corrosion depth
most
zbrojenia
beton wzmocniony
wzmocnienie
pełzanie betonu
pęknięcia
korozja
Opis:
To solve the problem of predicting the service life of superstructures, this work proposes the basis and methodological developments of creep theory with increasing loads as well as regression analysis of the results of laboratory experiments. The main limitation in terms of reinforcement is corrosion in the concrete cracks, which was determined during laboratory experiments. Based on the results, the approximate analytical dependences concerning reinforcement corrosion depth change over time at a constant value of crack width were selected. The paper substantiates the validity of the analytical dependences as a result of regression analysis; it proposes formulae for determining the corrosion rate of rebars in reinforced concrete superstructures. The obtained analytical dependences allowed for the developing of a process for predicting changes to the state of the superstructure in light of operational changes.
Źródło:
Civil and Environmental Engineering Reports; 2019, 29, 3; 134-152
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical simulation of the stressed-deformed condition of reinforced concrete beams in simultaneous influence of aggressive environment and loading
Autorzy:
Shmyh, R.
Powiązania:
https://bibliotekanauki.pl/articles/410855.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
reinforced concrete beam
stress-deformed state
hypothesis of plane sections
aggressive environment
corrosion
Opis:
In this paper, the method of determining the stress-strain state of reinforced concrete beams at the simultaneous action of the aggressive medium and the load on the basis of the discrete representation of the of concrete and reinforcement μ-δ beam structures using the diagrams with the help of a computer is considered. The proposed methodology allowed to simulate the work of reinforced concrete beams at all stages of loading, including destruction. At the same time, at each stage of loading, deformations and stresses in concrete and reinforcements are obtained along the entire height of the section and along the length of the beam. The method also allows to take into account the previous tension in the valve, which takes place in the manufacturing stage. In addition, it enables to simulate the formation and development of normal and inclined cracks, the beginning of the destruction of reinforced concrete beams, determine their bearing capacity and bends. Performed with the help of the proposed methodology, calculations of experimental models of reinforced concrete beams demonstrated a good coincidence of results.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2017, 6, 3; 39-44
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zagadnienia trwałości w projektowaniu konstrukcji żelbetowych
Issues of durability in the design of reinforced concrete structures
Autorzy:
Zybura, A.
Śliwka, A.
Powiązania:
https://bibliotekanauki.pl/articles/161021.pdf
Data publikacji:
2018
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja żelbetowa
trwałość
EC 2
Eurokod 2
oddziaływanie środowiska
spękanie
korozja zbrojenia
ochrona przed korozją
nadbeton
reinforced concrete structure
durability
Eurocode 2
environmental impact
crack
reinforcement corrosion
corrosion protection
concrete cover
Opis:
Przedstawiono zasady zapewnienia trwałości projektowanym konstrukcjom żelbetowym w ścisłym nawiązaniu do zapisów Eurokodu 2. Omówiono ogólne warunki ochrony przed niekorzystnym działaniem środowiska oraz wpływ jakości betonu, grubości otuliny i szerokości rozwarcia rys na zabezpieczenie zbrojenia przed korozją. Przedstawiono przebieg procesów korozji zbrojenia i wewnętrznej korozji betonu. Określono sposób zabezpieczenia zbrojenia otuliną betonową oraz podano ogólną charakterystykę specjalnych środków ochronnych.
The principles of ensuring durability of designed reinforced concrete structures in the strict reference to Eurocode 2 were presented. The general conditions of protection against unfavorable environmental impact and the influence of concrete quality, thickness of the concrete cover and crack width on protection of reinforcement against corrosion were discussed. The course of corrosion processes of reinforcement and internal corrosion of concrete is presented. The method of reinforcement protection with concrete cover was specified and general characteristics of special protective measures were given.
Źródło:
Przegląd Budowlany; 2018, 89, 10; 15-21
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczniki trwałości betonu w obiektach oczyszczania ścieków
Determinants of concrete durability in sewage treatment facilities
Autorzy:
Jasiczak, J.
Powiązania:
https://bibliotekanauki.pl/articles/162823.pdf
Data publikacji:
2018
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
oczyszczalnia ścieków
konstrukcja żelbetowa
trwałość betonu
wyznacznik trwałości
korozja chemiczna
specyfikacja betonu
sewage treatment plant
concrete structure
concrete durability
durability determinant
chemical corrosion
concrete specification
reinforced concrete structure
Opis:
Projektowanie i realizacja oczyszczalni ścieków należą do najbardziej skomplikowanych procesów inwestycyjnych. Na równie wysokim poziomie muszą pozostawać procesy mechanicznego, biologicznego oraz chemicznego oczyszczania ścieków, wyposażenie technologiczne oraz procesy budowlane, zapewniające trwałość konstrukcji prawie wyłącznie betonowej przy agresywnych oddziaływaniach wewnętrznych i zewnętrznych. Na procesy te nakładają się ogólne warunki ochrony środowiska wynikające z przepisów krajowych i międzynarodowych. Przepisy te okresowo się zmieniają, stąd zarówno projektanci, jak i wykonawcy nie w pełni się do nich stosują, co obniża spodziewaną funkcję użyteczności obiektu.
The design and implementation of wastewater treatment plants are among the most complex investment processes. At an equally high level, mechanical, biological and chemical wastewater treatment processes, technological equipment and construction processes must be maintained, ensuring the durability of almost exclusively concrete structures with aggressive internal and external impacts. These processes overlap with the general environmental protection conditions resulting from national and international regulations. These regulations change periodically, hence both designers and contractors do not fully apply to them, which ultimately reduces the expected utility functions of the object.
Źródło:
Przegląd Budowlany; 2018, 89, 7-8; 68-73
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena zagrożenia korozją zbrojenia konstrukcji żelbetowych, cz. 2 - Elektrochemiczne badania korozyjne
Evaluation of the danger of corrosion of the reinforcement of reinforced concrete structures, part 2 - electrochemical corrosion testing
Autorzy:
Zybura, A.
Jaśniok, M.
Jaśniok, T.
Powiązania:
https://bibliotekanauki.pl/articles/162551.pdf
Data publikacji:
2013
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja żelbetowa
zagrożenie korozją
ocena zagrożenia
badanie korozyjne
badanie elektrochemiczne
reinforced concrete structure
corrosion danger
danger evaluation
corrosion testing
electrochemical testing
Opis:
Przedstawiając kompleksowo problem oceny zagrożenia korozją zbrojenia konstrukcji żelbetowych w pierwszej części pracy omówiono przyczyny degradacji konstrukcji, podstawy oceny jej trwałości, a także badania oceniające właściwości ochronne betonu, w tym sposoby pobierania materiału, określenie zasięgu karbonatyzacji i stężenia chlorków. W drugiej części scharakteryzowano proces korozji stali zbrojeniowej oraz elektrochemiczne metody pomiarowe i sposoby oceny szybkości korozji zbrojenia w betonie. Przedstawiono metodykę oceny zagrożenia korozyjnego żelbetu: sprzęt diagnostyczny, planowanie badań konstrukcji oraz kryteria oceny wyników badań.
Beginning a comprehensive presentation of the subject of evaluation of the danger of corrosion to the reinforcement of reinforced concrete structures, an account was given in the first part of this work of the causes of degradation of a structure, the basis for assessment of its durability, and tests to evaluate the protective properties of concrete, including methods for taking material samples and determination of the extent of carbonation and the concentration of chlorides. In this second part of the work, a description is given of the process of corrosion of reinforcing steel, electrochemical methods of measurement, and ways of evaluating the rate of corrosion of the reinforcement within concrete. Methodology is given for evaluating the danger of corrosion to reinforced concrete: diagnostic equipment, planning of structural testing, and criteria for evaluating the test results.
Źródło:
Przegląd Budowlany; 2013, R. 84, nr 1, 1; 46-51
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka, wzmacnianie i monitorowanie żelbetowych i sprężonych zbiorników na materiały sypkie i ciecze
Diagnostics, reinforcement and monitoring of steel reinforced concrete and compressed containers for bulk materials and liquids
Autorzy:
Runkiewicz, L.
Lewiński, P.
Powiązania:
https://bibliotekanauki.pl/articles/163677.pdf
Data publikacji:
2014
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
zbiornik żelbetowy
silos
konstrukcja sprężona
cięgno
korozja
diagnostyka
monitorowanie
wzmacnianie
reinforced concrete tank
silo
prestressed concrete
tendon
corrosion
diagnostics
monitoring
strengthening
Opis:
W artykule przedstawiono szereg przykładów ilustrujących różne przypadki diagnostyczne. W wielu z nich występują (lub występowały) stany zagrożeń silosów sprężonych obwodowo spowodowane korozją cięgien. Obecnie dysponujemy metodami skutecznego i trwałego wzmacniania tego typu konstrukcji. Z analizy wyników monitorowaniu tych konstrukcji wynikają istotne wnioski odnośnie wymagań w zakresie projektowania, wykonawstwa, diagnostyki i eksploatacji omawianych obiektów.
The article lists numerous examples which illustrate various diagnostic cases. In case of many of them, there is (or was) the risk to the silos as a result of the corrosion of the bands. Nowadays, we may use methods of efficient and durable reinforcement in this kind of constructions. The analysis of the results of monitoring the constructions provides significant conclusions regarding the design, performance, diagnostics and use of the said objects.
Źródło:
Przegląd Budowlany; 2014, R. 85, nr 10, 10; 25-32
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena zagrożenia korozją zbrojenia konstrukcji żelbetowych. Cz. 1 - badania właściwości ochronnych betonu
Evaluation of the danger of corrosion of the reinforcement of reinforced concrete structures. Part 1 - testing of the protective properties of concrete
Autorzy:
Zybura, A.
Jaśniok, M.
Jaśniok, T.
Powiązania:
https://bibliotekanauki.pl/articles/163413.pdf
Data publikacji:
2012
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja żelbetowa
korozja zbrojenia
zagrożenie korozją
ocena zagrożenia
diagnostyka korozyjna
badanie elektrochemiczne
właściwości ochronne betonu
reinforced concrete structure
reinforced ccorrosion
corrosion risk
risk evaluation
corrosion diagnostics
electrochemical testing
protective properties of concrete
Opis:
Uwzględniając najnowsze przepisy projektowania zawarte w Eurokodzie 2 w pierwszej części opisano oddziaływanie środowiska na żelbet, w tym przyczyny degradacji konstrukcji oraz podstawy oceny jej trwałości. Omówiono badania oceniające właściwości ochronne betonu, w szczególności sposoby pobierania materiału, określenie zasięgu karbonatyzacji i stężenia chlorków. Badania te mają na celu określenie warunków, które wpływają na inicjację lub brak procesów korozyjnych stali zbrojeniowej. W drugiej części zostanie przedstawiony przebieg oraz metody pomiaru intensywności korozji wkładek w konstrukcji.
Taking account of the latest design regulations contained in Eurocode 2, the first part of this work describes environmental impacts on reinforced concrete, including the causes of degradation of a structure and the basis for assessment of its durability. A description is given of tests to evaluate the protective properties of concrete, in particular methods for taking material samples and determination of the extent of carbonation and the concentration of chlorides. The purpose of these tests is to determine conditions that bring about the initiation or absence of corrosion of the reinforcing steel. The second part of the work will deal with the process of corrosion and methods for measuring its intensity.
Źródło:
Przegląd Budowlany; 2012, R. 83, nr 11, 11; 29-35
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trwałość, koszty, normalizacja oraz przykłady zastosowań metod ekstrakcji chlorków i realkalizacji skarbonatyzowanego betonu
Durability, cost, standardisation and examples of the electrochemical methods of realkalisation of carbonated concrete and chloride extraction
Autorzy:
Piaskowski, P.
Miller, J. D.
Powiązania:
https://bibliotekanauki.pl/articles/161456.pdf
Data publikacji:
2014
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja żelbetowa
zbrojenie
otulina betonowa
beton skarbonizowany
uszkodzenie korozyjne
korozja chlorkowa
ekstrakcja chlorków
realkalizacja betonu
reinforced concrete structure
reinforcement
concrete cover
carbonated concrete
corrosive damage
chloride corrosion
chloride extraction
concrete realkalization
Opis:
Artykuł zawiera krótkie przypomnienie zasad wykonywania realkalizacji skarbonatyzowanego betonu i ekstrakcji chlorków. Wyszczególnia obowiązujace oraz będace w przygotowaniu normy europejskie dotyczące tych metod. Podaje przykłady zastosowań, gdzie udokumentowano badaniami trwałość napraw żelbetu przy ich wykorzystaniu, a także określa nakłady pracy, specyfikację materiałów i sprzętu potrzebnych do ich przeprowadzenia. Przybliża zaledwie kilka przykładów zastosowania wymienionych metod, jednak prawie wszystkie możliwe ich aspekty były badane przez wielu czołowych naukowców oraz instytuty w Polsce i na świecie. Dostępna jest także obszerna literatura i materiały omawiające te metody.
The paper presents a brief summary of the electrochemical methods of chloride extraction from salt contaminated concrete, and realkalisation of carbonated concrete. A few references to literature and European standards relevant to the implementation of the methods are given. Examples of applications, including durability data and repair techniques, are touched upon, as well as the resources needed in terms of labor, material and equipment. Though only a few references are given, almost all imaginable aspects of these methods have been investigated by many of the world’s foremost researchers and institutes, some of them Polish, and there is a large body of literature dealing with a great many aspects of these two methods.
Źródło:
Przegląd Budowlany; 2014, R. 85, nr 5, 5; 52-55
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ochrona katodowa stali w betonie w świetle norm międzynarodowych
Cathodic protection of steel in concrete according to international standards
Autorzy:
Sokólski, W.
Powiązania:
https://bibliotekanauki.pl/articles/163448.pdf
Data publikacji:
2012
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
żelbet
korozja stali
ochrona przed korozją
ochrona katodowa
normalizacja międzynarodowa
ISO 12696
reinforced concrete
steel corrosion
corrosion protection
cathodic protection
international standardization
Opis:
Ostatnio została znowelizowana opracowana na przełomie wieków norma europejska EN 12696 "Cathodic protection of steel in concrete". Normę tę przyjęto w roku 2009 do międzynarodowego programu normalizacyjnego ISO i obecnie została ona uchwalona. Artykuł przybliża technologię ochrony przeciwkorozyjnej konstrukcji żelbetowych z wykorzystaniem ochrony katodowej oraz omawia zasadnicze jej kanony ujęte w wymaganiach normy. Próbuje także udzielić odpowiedzi, dlaczego pomimo niezaprzeczalnych zalet, metoda ochrony katodowej stali zbrojeniowej konstrukcji żelbetowych praktycznie nie jest w Polsce stosowana.
An update has recently been made to European standard EN 12696 "Cathodic protection of steel in concrete", which was developed at the turn of the century. The new standard was adopted into the ISO international standardization programme in 2009, and has now been approved. This article describes the technology for corrosion protection of reinforced concrete structures using cathodic protection, and discusses the principles for its use in accordance with the requirements of the standard. An attempt is also made to explain why, in spite of its indisputable advantages, the method of cathodic protection of steel in reinforced concrete structures is rarely used in Poland.
Źródło:
Przegląd Budowlany; 2012, R. 83, nr 6, 6; 54-56
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cementy specjalne dla budownictwa podziemnego
Special cements for underground construction
Autorzy:
Szeląg, H.
Kurdowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/350702.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
cement ekspansywny
beton wysokowartościowy
skurcz
korozja
ekspansja
expansive cement
high performance concrete
shrinkage
expansion
corrosion
Opis:
W artykule omówiono właściwości cementów specjalnych i gotowych mieszanek betonowych opracowanych i wytwarzanych w Oddziale Mineralnych Materiałów Budowlanych ISCMOiB w Krakowie. Pokazane właściwości podkreślają wyjątkowe cechy tych materiałów, gwarantujące trwałość konstrukcji w ekstremalnych warunkach obciążeń eksploatacyjnych i oddziaływania środowiska. Dotyczy to bardzo wysokich wytrzymałości, małej porowatości i korzystnego rozkładu porów, odporności na korozję chemiczną: chlorkową i siarczanową, mrozoodporności i kontrolowanych wartości bardzo niskiego skurczu i ekspansji dla odmian betonów ekspansywnych. Podane właściwości predysponują omawiane materiały do wykonywania i napraw konstrukcji betonowych w budownictwie infrastruktury drogowej ze szczególnym uwzględnieniem w aplikacjach budownictwa podziemnego, jak również w konstrukcjach przemysłu górniczego.
The paper describes properties of special cements and prepared concrete blends elaborated and produced in the Division of Mineral Building Materials in Cracow. Showed properties emphasize exceptional features of these materials which guarantee durability of constructions under extreme conditions of exploitation load and environmental effects. It concerns very high resistances, small porosity and advantageous pore size distribution, resistance to chemical corrosion, freeze resistance and controlled values of very low contraction and expansion for expansive concretes. These properties predispose above mentioned materials to accomplishment and repair of concrete constructions in road infrastructure building, especially in applications of underground construction as well as in constructions of mining industry.
Źródło:
Górnictwo i Geoinżynieria; 2009, 33, 3/1; 373-382
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of non-destructive method to evaluate the process of electrochemical corrosion of reinforcement in concrete
Wykorzystanie nieniszczącej metody elektrochemicznej do oceny procesu korozji zbrojenia w betonie
Autorzy:
Raczkiewicz, W.
Michałowska-Maziejuk, D.
Powiązania:
https://bibliotekanauki.pl/articles/402533.pdf
Data publikacji:
2012
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
reinforced concrete
corrosion of reinforcement
non-destructive electrochemical method
beton zbrojony
korozja zbrojenia
nieniszcząca metoda elektrochemiczna
Opis:
The article describes non-destructive electrochemical method that assesses the severity of corrosion of reinforcement in concrete and presents experimental studies carried out in application of this method. The study was conducted on two types of concrete specimens of differing type cement: CEM I and CEM IIIA. The specimens tests were subjected to cycles of freezing and thawing process in a solution of NaCl. Then on the specimens the measurements were carried out, which allowed for the observation of degradation and the development of concrete cover of reinforcing steel corrosion. The measurements were performed with using a test apparatus by which it was possible to determine the existence of corrosion and its severity using three independent parameters: fixed potential and its gradient, the resistivity of concrete cover and densities of the corrosion current. The results obtained enabled the analysis of corrosion occurring in the specimen of reinforced concrete as well as to assess the effectiveness of the apparatus used for the measurement.
Źródło:
Structure and Environment; 2012, 4, 4; 21-27
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wpływu stanu betonu w konstrukcji na szybkość procesu korozji zbrojenia w obiektach mostowych
Influence of concrete condition in structure on steel corrosion in reinforced concrete bridges
Autorzy:
Łakomy, T.
Powiązania:
https://bibliotekanauki.pl/articles/162025.pdf
Data publikacji:
2010
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
most
konstrukcja żelbetowa
stan techniczny betonu
ocena stanu technicznego
korozja zbrojenia
bridge
reinforced concrete structure
technical state of concrete
technical state assessment
reinforcement corrosion
Opis:
W artykule zaprezentowano wybrane wyniki i wnioski z badań polowych oraz obserwacji z przeglądów dziesięciu drogowych obiektów mostowych wybudowanych w dwóch wyraźnie róźnych okresach czasu, około roku 1950 oraz około roku 1975. W trakcie badań analizowano przebieg w warunkach rzeczywistych oraz zależności między procesami karbonatyzacji, wnikania chlorków a szybkością korozji zbrojenia. Określono również wpływ cech wytrzymałościowych betonu oraz uwarunkowań konstrukcyjnych, eksploatacyjnych i środowiskowych na szybkość korozji zbrojenia w konstrukcjach mostowych.
In-situ test results and observations from site inspections of ten road bridges were presented. These bridges were erected in two significantly different time spans: around year 1950 and around year 1975. Progress of carbonation, chloride ingress and steel corrosion in real conditions and relationships among these processes were analyzed. Concrete compressive strength, applied construction solutions as well as working and environmental conditions were also taken into account.
Źródło:
Przegląd Budowlany; 2010, R. 81, nr 6, 6; 52-55
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przykłady degradacji konstrukcji żelbetowych w obiektach zakładu przemysłowego
Examples of the degradation of reinforced-concrete structures in the buildings of an industrial plant
Autorzy:
Berkowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/162660.pdf
Data publikacji:
2011
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
zakład przemysłowy
konstrukcja żelbetowa
degradacja
diagnoza
korozja chemiczna
industrial plant
reinforced concrete structure
degradation
diagnosis
chemical corrosion
Opis:
W pracy przedstawiono przykłady uszkodzeń elementów konstrukcji żelbetowych znajdujących się w wybranych obiektach zakładu przetwarzającego rudę miedzi. Mimo krótkiego okresu eksploatacji, wynoszącego około 20 lat, wpływ warunków pracy i środowiska spowodował silne uszkodzenia zarówno betonu, jak i zbrojenia, obniżające trwałość i nośność tych elementów. Opisano w skrócie proces diagnostyki przyczyn powstania uszkodzeń oraz sposób przywrócenia technicznej sprawności omawianych konstrukcji.
Examples are presented of damage to elements of reinforced-concrete structures in selected buildings of a copper ore processing plant. Although the buildings have been in use for only about 20 years, the effect of the working conditions and the environment have caused heavy damage both to the concrete and to the reinforcement, reducing the durability and load capacity of those elements. A summary description is given of the process of diagnosis of the causes of this damage and the method by which the structures are restored to good technical condition.
Źródło:
Przegląd Budowlany; 2011, R. 82, nr 7-8, 7-8; 42-44
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion of RC elements` reinforcement and its influence on the stress-strain state
Autorzy:
Blikharskyy, Yaroslav
Kopiika, Nadiia
Blikharskyy, Zinoviy
Powiązania:
https://bibliotekanauki.pl/articles/103969.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
corrosion
reinforced concrete elements
steel bars
stress-strain state
korozja
elementy żelbetowe
pręty stalowe
stan naprężenie-odkształcenie
Opis:
The stress-strain state of reinforced concrete elements is rather complicated issue of scientific research, which integrates different factors, such as the load type, atmospheric conditions, various defects, damages, geometric deviations. It is commonly known that corrosion of reinforced concrete elements affects both the strength and deformation parameters of the structure significantly; thus, internal stresses` parameters are also influenced. Therefore, detailed theoretical investigation of this issue is the main goal of this article. The detailed literature review and thorough analysis was conducted concerning previous experimental and theoretical studies of the corrosion defects` influence on the reinforced concrete elements` stress-strain state. Existing data and results were systematized and analyzed. On the basis of provided research it could be concluded that the reinforced concrete elements` stressstrain state greatly depends on existing damages and impurities. The stress-strain state could be complicated on micro-scale due to material chemical and mechanical peculiarities; simultaneously on macro-scale the bearing capacity is of the structure could be reduced in general. In the articles existing methods for this issue simulation and evaluation are described and perspective fields for further research are identified. The practical significance of the article is due to complex approach to the research and multilateral identification of the main issue key points.
Źródło:
Quality Production Improvement - QPI; 2020, 2, 1; 214-220
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
FEM modeling of rebar corrosion - numerical verification of experimental research
Modelowanie MES korozji zbrojenia - weryfikacja numeryczna badań doświadczalnych
Autorzy:
Krykowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/395825.pdf
Data publikacji:
2010
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
korozja
teoria plastyczności
MES (metoda elementów skończonych)
korozja zbrojenia
corrosion
theory of plasticity
FEM
reinforced concrete degradation
Opis:
The paper presents the experimental verification of concrete cover splitting time theory based on the multicomponent media approach and FEM. The results of computer analysis are compared with the experiment presented in the work of Youping Liu [15]. The solid model of the structure analyzed in the paper [15] has been made. The problem has been analyzed by using the program for the elastic plastic analysis with distortions by using FEM.
W pracy przedstawiono zastosowanie modelu bazującego na teorii ośrodków wieloskładnikowych i MES do wyznaczania czasu odspojenia otuliny betonowej. Wyniki analiz komputerowych porównano z wynikami eksperymentalnymi otrzymanymi w pracy [15]. Dla potrzeb analizy komputerowej wykonano model przestrzenny konstrukcji. Zagadnienie analizowano programem do obliczania konstrukcji w zakresie sprężystoplastycznym z dystorsjami mechanicznymi. Algorytm zaimplementowany w programie był modyfikowany stosownie do założeń teoretycznych modelu degradacji otuliny [9]. Jako wynik analizy otrzymano czas pękania otuliny [...]. W wyniku przeprowadzonych obliczeń stwierdzono dobrą korelację wyników teoretycznych z wynikami eksperymentalnymi.
Źródło:
Civil and Environmental Engineering Reports; 2010, 5; 205-218
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbonation of concrete cover of reinforcement as a cause of loss of durability of structures
Karbonatyzacja betonu otuliny zbrojenia jako przyczyna utraty trwałości konstrukcji
Autorzy:
Kłos, Kaja
Adamczewski, Grzegorz
Woyciechowski, Piotr
Łukowski, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2203422.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beton
karbonatyzacja
korozja
otulina zbrojenia
trwałość
mrozoodporność
synergia
carbonation
concrete
corrosion
reinforcement cover
durability
frost resistance
synergy
Opis:
The article discusses the physical and chemical mechanisms of the carbonation phenomenon itself, as well as points out the synergistic effect of frost destruction and concrete carbonation on reinforced concrete elements. Examples of structural damage from engineering practice in the diagnosis of reinforced concrete structures are presented. Two cases of frost and carbonation damage of precast reinforced concrete elements are analyzed. It was noted that the most common cause of damage to concrete structures is the lack of frost resistance. Carbonation of concrete leads to deprivation of the protective properties of the concrete lagging against the reinforcing steel. The examples cited include precast elements that, for technical reasons, had a relatively small lagging thickness. The first one relates to the thin walled elevation elements, which are exploited during 60 years and the second relates to the energetic poles with very advanced concrete corrosion damage. The examples given of corrosion of concrete and reinforcement of elements indicate that synergistic environmental interactions can intensify the destruction of elements.
W artykule omówiono mechanizmy fizyczne i chemiczne samego zjawiska karbonatyzacji, jak również zwrócono uwagę na synergiczne działanie destrukcji mrozowej i karbonatyzacji betonu na elementy żelbetowe. Przedstawiono przykłady uszkodzeń strukturalnych z praktyki inżynierskiej w zakresie diagnostyki konstrukcji żelbetowych. Przeanalizowano dwa przypadki uszkodzeń mrozowych i karbonatyzacyjnych prefabrykatów żelbetowych. Zauważono, że najczęstszą przyczyną uszkodzeń konstrukcji betonowych jest brak mrozoodporności. Karbonatyzacja betonu prowadzi do pozbawienia właściwości ochronnych otuliny betonowej względem stali zbrojeniowej. Przytoczone przykłady dotyczą elementów prefabrykowanych, które ze względów technicznych miały stosunkowo niewielką grubość otuliny. Pierwszy z nich dotyczy cienkościennych elementów elewacji, eksploatowanych w okresie 60 lat, a drugi dotyczy słupów energetycznych z bardzo zaawansowanymi uszkodzeniami korozyjnymi betonu. Podane przykłady korozji betonu i zbrojenia elementów wskazują, że synergiczne oddziaływania środowiskowe mogą intensyfikować destrukcję elementów.
Źródło:
Archives of Civil Engineering; 2023, 69, 1; 119--129
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of a polyurea layer on cracking and performance of reinforced concrete beams under breaking load
Wpływ warstwy polimocznika na zarysowanie i pracę pod obciążeniem niszczącym belek żelbetowych
Autorzy:
Szafran, Jacek
Matusiak, Artur
Rzeszut, Katarzyna
Jankowiak, Iwona
Powiązania:
https://bibliotekanauki.pl/articles/2142748.pdf
Data publikacji:
2022
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
polyurea
corrosion
reinforced concrete beams
breaking load
cracks
durability
polimocznik
korozja
belki żelbetowe
obciążenie niszczące
rysy
trwałość
Opis:
The paper discusses the results of laboratory experimental studies on reinforced concrete components (beams) with an outer polyurea layer. The important part of the study is the comparison of the results concerning the load-displacement relation for the reference beams (without the polyurea layer on their external surfaces) and those with the polyurea layer. The main conclusion from this part of the research is that the beam elements covered with a polyurea layer are protected against corrosion processes even in an emergency state. The occurrence of scratches, even of large size, is neutralized by the coating that effectively bridges them.
W artykule zaprezentowano wyniki laboratoryjnych badań eksperymentalnych dotyczących elementów żelbetowych (belek) wraz z zewnętrzną warstwą polimocznika. Istotną częścią pracy jest porównanie wyników zależności obciążenie - przemieszczenie dla belek referencyjnych (bez warstwy polimocznika na powierzchniach zewnętrznych) oraz tych taką warstwę posiadającą. Kluczowym wnioskiem płynącym z tej części badań jest ten mówiący o tym, że elementy belkowe pokryte warstwą polimocznika zabezpieczone są przed korozją nawet w stanie awaryjnym. Występowanie rys nawet znacznych rozmiarów jest zneutralizowane poprzez skuteczne ich mostkowanie powłoką.
Źródło:
Structure and Environment; 2022, 14, 3; 76--82
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of the damaged reinforcing bars on the stress-strain state of the rein-forced concrete beams
Autorzy:
Blikharskyy, Z.
Shnal, T.
Khmil, R.
Powiązania:
https://bibliotekanauki.pl/articles/111738.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
corrosion
damage
armature
stress-strain state
reinforced concrete
beam
korozja
wzmocniony beton
belki
agresywne środowisko
stan naprężenie-odkształcenie
Opis:
The article is devoted to the overall view of experimental research of reinforced concrete beams with the simultaneous influence of the corrosion environment and loading. The tests have been carried out upon the reinforced concrete specimens considering the corrosion in the acid environment, namely 10 % H2SO4 that have been taken as a model of the aggressive environment. The beams are with span equalling to 1,9m with different series of tensile armature, concrete compressive strength and different length of impact of corrosion (continuous and local). The influence of simultaneous action of the aggressive environment and loading on strength of reinforced-concrete beams has been described. For a detailed study of the effect of individual components there was suggested additional experimental modelling of the only tensile armature damage without concrete damage. It will investigate the influence of this factor irrespective of the concrete.
Źródło:
Production Engineering Archives; 2017, 14; 23-26
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena betonu jako otuliny stali zbrojeniowej
Evaluation of concrete as the cover of reinforcing steel
Autorzy:
Raczkiewicz, W.
Grzmil, W.
Powiązania:
https://bibliotekanauki.pl/articles/161355.pdf
Data publikacji:
2014
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
beton napowietrzony
żelbet
stal zbrojeniowa
otulina betonowa
trwałość
szybkość karbonatyzacji
korozja chlorkowa
CEM I
CEM III
badanie elektrochemiczne
aerated concrete
reinforced concrete
reinforcing steel
concrete cover
durability
carbonation rate
chloride corrosion
electrochemical study
Opis:
W artykule opisano wyniki badań mające na celu porównanie przebiegu korozji w żelbetowych próbkach z betonu napowietrzanego wykonanego na bazie dwóch rodzajów cementów: CEM I i CEM IIIA. Ocenę zagrożenia korozją stali zbrojeniowej w betonie oparto na badaniach materiałowych i badaniach elektrochemicznych. Badania materiałowe dotyczyły pomiaru pH i tym samym określenia stopnia karbonatyzacji betonu i składu mineralnego. Badania elektrochemiczne pozwoliły w sposób nieniszczący określić obszary objęte korozją oraz ocenić intensywność procesów korozyjnych.
The article describes a study to compare the course of corrosion in reinforced aerated concrete samples made from two types of cement CEM I and CEM III. The assessment of the corrosion risk of reinforcing steel in concrete is based on research materials and electrochemical studies. The research materials relate to the measurement of pH and thereby determine the degree of carbonation of concrete and mineral composition. The electrochemical studies have allowed in non-destructively way to determine the areas covered by corrosion and to assess the intensity of corrosion processes.
Źródło:
Przegląd Budowlany; 2014, R. 85, nr 5, 5; 56-58
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nieniszcząca diagnostyka korozji zbrojenia konstrukcji żelbetowych narażonych na szkodliwe oddziaływanie prądów błądzących
Non-destructive corrosion diagnostics of reinforced concrete structure reinforcement subjected to harmful interaction of stray currents
Autorzy:
Kučera, B.
Jankowski, J.
Sokólski, W.
Powiązania:
https://bibliotekanauki.pl/articles/163498.pdf
Data publikacji:
2016
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja żelbetowa
diagnostyka
badanie nieniszczące
korozja zbrojenia
prąd błądzący
monitorowanie stanu technicznego
SHM
szybkość korozji
ochrona przed korozją
reinforced concrete structure
diagnostics
nondestructive testing
reinforcement corrosion
eddy current
structural health monitoring
corrosion rate
corrosion protection
Opis:
W opracowaniu przedstawiono zebrane doświadczenia w doborze metod i urządzeń do monitorowania korozji podczas projektowania środków ochrony przed skutkami działania prądów błądzących na stalowe zbrojenie niektórych konstrukcji żelbetowych. Omówiono wieloletnie obserwacje systemów rejestracji postępowania procesu korozyjnego zbrojenia CMS, które następnie uzupełniane były czujnikami rezystywności betonu, sondami głębokości penetracji czynników agresywnych do zbrojenia, a przede wszystkim czujnikami szybkości korozji. W ciągu ostatnich około 15 lat zainstalowano ponad 130 czujników korozymetrycznych na różnych obiektach w Republice Czeskiej. Podano w zarysie metodologię stosowania tej techniki pomiarowej.
In the paper acquired experience has been presented in selection of methods and equipment for monitoring of corrosion during the designing process of protection means against stray current interaction on steel reinforcement of some reinforced concrete structures. Long-term observations have been described of reinforcement corrosion progress CMS recording systems, consecutively supplemented by concrete resistivity probes, aggressive agent penetration depth probes into reinforcement, and primarily with corrosion rate probes. During the past 15 years over 130 electrical resistance probes have been installed in various objects in the Czech Republic. The application method of this measurement technique has been described.
Źródło:
Przegląd Budowlany; 2016, R. 87, nr 5, 5; 35-37
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie procesu korozji siarczanowej w kominie żelbetowym
Autorzy:
Konderla, Piotr
Kutyłowski, Ryszard
Patralski, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/128901.pdf
Data publikacji:
2020
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
komin przemysłowy
korozja siarczanowa
komin żelbetowy
przepływ spalin
dyfuzja jonów
destrukcja betonu
industrial chimney
sulfate corrosion
reinforced concrete chimney
exhaust gas flow
ion diffusion
concrete destruction
Opis:
Kominy przemysłowe, z uwagi na charakter pracy i lokalizację, pracują w środowisku charakteryzującym się silnym oddziaływaniem korozyjnym na konstrukcje budowlane. Głównym źródłem negatywnych oddziaływań chemicznych są spaliny przepływające przez przewód kominowy, zawierające znaczne ilości związków siarki, które w określonych warunkach mogą wywoływać korozję siarczanową konstrukcji trzonu komina, a w konsekwencji prowadzić do obniżenia nośności i trwałości konstrukcji żelbetowych kominów. Celem pracy była próba jednolitego, możliwie prostego opisu procesu korozji siarczanowej jako superpozycji kilku sprzężonych procesów zachodzących w trakcie pracy komina, a w szczególności: a) przepływu spalin w przewodzie komina; b) dyfuzji jonów siarki w betonie trzonu komina z jednoczesnym tworzeniem się siarczanów; c) postępującej destrukcji betonu trzonu żelbetowego w wyniku korozji siarczanowej i w efekcie obniżania się nośności konstrukcji komina. Badania konstrukcji in situ są danymi wejściowymi dla powyższych procesów. Rozważania teoretyczne są ilustrowane wynikami analizy wybranego żelbetowego komina przemysłowego odprowadzającego spaliny o dużej zawartości związków siarki.
Industrial chimneys usually operate in an environment with a strong corrosive influence. The main corrosion source is the sulfur-containing combustion gas. This corrosion leads to chimney bearing capacity and durability decreasing. The main goal of the research was possible simple sulfur corrosion description as a superposition of the following processes: a) combustion gas flow, b) sulfur ion diffusion over the chimney shaft with sulfate generating, c) destruction of the material as a result of sulfur corrosion. In situ investigations were the base for the input data for the above processes. Theoretical investigations are illustrated by the results of the analysis of industrial chimney which carry off the combustion gas with large quantity of the sulfur compounds.
Źródło:
Builder; 2020, 24, 4; 34-37
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of the agressive acid environment on RC constructions
Autorzy:
Blikharskyy, Yaroslav
Khmil, Roman
Blikharskyy, Zinoviy
Shnal, Taras
Powiązania:
https://bibliotekanauki.pl/articles/88692.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
aggressive environment
reinforce concrete
beams
corrosion
damaged constructions
środowisko agresywne
środowisko kwaśne
konstrukcja żelbetowa
belka
beton zbrojony
korozja
Opis:
The main issue of the article is the corrosion of the reinforced concrete elements by the co-influence of the aggressive and power factors. The problem of corrosion is extremely actual one. Therefore the tests were carried out upon the specimens considering the corrosion in the acid environment, namely 10 % HSO4. The acid environment H2SO4 was taken as a model of the aggressive environment. Conclusions concerning the corrosion model of the cross section and investigation of stress-strain state have been made. That material concerns the problem of the reinforced concrete corrosion as a whole construction. Reinforced concrete beams were tested with and without the co-action of the aggressive environment and power factor.
Źródło:
System Safety : Human - Technical Facility - Environment; 2020, 2, 1; 223-229
2657-5450
Pojawia się w:
System Safety : Human - Technical Facility - Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Korozja chlorkowa - niedoceniany czynnik destrukcji w garażach wielostanowiskowych
Chloride corrosion - an underestimated destructive factor in multi-garage garages
Autorzy:
Hebda, Lesław
Białecki, Daniel
Majewski, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2202711.pdf
Data publikacji:
2022
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja żelbetowa
korozja zbrojenia
korozja chlorkowa
zniszczenie
garaż podziemny
garaż wielostanowiskowy
przykład
naprawa
reinforced concrete structure
reinforcement corrosion
chloride corrosion
destruction
underground garage
multi-station garage
example
repair
Opis:
W artykule przedstawiono mechanizm korozji chlorkowej w konstrukcjach żelbetowych i przykłady wyników badań stężenia jonów chlorkowych w elementach konstrukcyjnych garaży wielopoziomowych podziemnych i naziemnych, a także sposoby naprawy skorodowanych konstrukcji.
In this article we present the mechanism of chloride corrosion in reinforced concrete installations and examples of results of the chloride ion concentration testes in the construction elements in multi-level garages, underground and overground, and the repair techniques of the corroded constructions.
Źródło:
Przegląd Budowlany; 2022, 93, 9-10; 157--160
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania wpływu środowiska chlorkowego na trwałość konstrukcji żelbetowej hali przemysłowej
Investigations of chloride background on durability of RC construction of industrial hall
Autorzy:
Kubiak, J.
Łodo, A.
Michałek, J.
Powiązania:
https://bibliotekanauki.pl/articles/161753.pdf
Data publikacji:
2010
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
hala przemysłowa
konstrukcja żelbetowa
trwałość konstrukcji
środowisko agresywne
korozja chlorkowa
stężenie chlorków
otulina betonowa
industrial hall
reinforced concrete construction
construction durability
aggressive environment
chloride corrosion
chloride concentration
concrete cover
Opis:
Przedstawiono wyniki badań zawartości chlorków w otulinie zbrojenia żelbetowych i sprężonych elementów prefabrykowanej konstrukcji hali odlewni aluminium. Opisano sposób doboru funkcji dyfuzji chlorków w betonie (wynikających z prawa Ficka) aproksymujących wyniki badań doświadczalnych. Na podstawie dobranych funkcji określono okresy trwałości głównych elementów konstrukcyjnych hali eksploatowanej w środowisku chlorkowym.
The results of investigations of the chloride content of a concrete covering of reinforced and prestressed concrete elements of the aluminum-casting factory structure are presented. The method of the selection of chloride diffusion function in concrete (on the basis of Fick law) was described. The theoretical curves approximate the experimental curves. On the basis of the selected functions the durability of the main structural elements of industrial hall in chloride background was estimated.
Źródło:
Przegląd Budowlany; 2010, R. 81, nr 7-8, 7-8; 63-69
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies