Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "combustion engine piston" wg kryterium: Temat


Tytuł:
Dilatometric researches of novel alloy for combustion engine pistons
Autorzy:
Żurek, J.
Slawinski, Z.
Jankowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/243032.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine piston
composite alloy
piston sample elongation
hysteresis
piston clearance
Opis:
The article presents dilatometric research results of composite alloy (in-situ) for combustion engines piston. Researches were performed with a precise dilatometer. Alloy's research test stand and test results including relative elongation, course of derivative of dimension increasing versus time with phase transition and course of coefficient of linear thermal expansion α for composite alloy versus temperature are presented in the article. Novel composite alloy allows getting a minimum difference of the coefficient of linear thermal expansion α during heating and cooling. In particular, the chemical composition of the novel composite silumin alloys; ATD of standard alloy – silumin Ak12 and novel composite alloy; schema of research stand and view of the measuring-head of the extension; course of the coefficient of linear thermal expansion α versus temperature during heating and cooling for the standard alloy and novel composite alloy; course of the relative piston elongation ΔL/Lo versus temperature during heating and cooling for the standard alloy and novel composite alloy; course of the derived function of the extension in relation to time dL/dt versus temperature for the standard alloy on pistons and novel composite alloy; course of the relative elongation in function of time during ageing of composite alloy at the temperature of 200°C with two-stage ageing process; course of the relative elongation in function of time during ageing of composite alloy at the temperature of 200°C for the first stage and second stage are presented in the article.
Źródło:
Journal of KONES; 2016, 23, 3; 585-596
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some problems pistons made from composite materials with small hysteresis to combustion engines
Autorzy:
Jankowska-Sieminska, B.
Powiązania:
https://bibliotekanauki.pl/articles/245555.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
combustion engine piston
composite alloys
thermal expansion
hysteresis
Opis:
Novel composite ma hysteresisterials on the pistons are characterised that they occur in them multiple intermetallic phases which crystallize in the high temperature, before crystallization of the alfa+beta (Al+Si) eutectic. For forming of pre-eutectic phases, chromium and molybdenum are introduced to silumins, and for derivation of multiple increased concentration of nickel and copper and decreased concentration of magnesium are accomplished. On the basis of evaluations of mechanical and thermal loads of combustion engines pistons applying essence of composite materials of combustion engines pistons, as well requirements for combustion engines pistons, especially high loaded engines are expressed. Test results of hardness, influence of temperature of casting, test results of mechanical properties, friction coefficient and coefficient of thermal expansion are presented in the paper. The special attention devoted to so called hysteresis coefficient of thermal expansion and hysteresis of the relative elongation in function temperature and time. Courses of coefficient of thermal expansion for standard and composite material are presented. Differences of the a coefficient during heating and cooling in function temperature are relative to kind of heat treatment. Two-stage heat treatment is beneficial for the obtainment small values of the a coefficient.
Źródło:
Journal of KONES; 2011, 18, 3; 123-128
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some effects of applying a new type of pistons for SU12-U diesel engine
Autorzy:
Jankowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/246313.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engines
compression ignition engines
exhaust emissions
combustion engine piston
piston materials
testing of combustion engines
Opis:
In the task of research and development of internal combustion engines, the strong emphasis is placed on reducing emissions of harmful substances in exhaust gases, which include carbon monoxide (CO), unburned hydrocarbons (HC), nitrogen oxides (NOx), particulate matter (PM, PN); while maintaining a high engine performance and, above all, adequate: power, fuel consumption, noise. One of the possibilities to reduce emissions of HC and engine working noise is to reduce the clearance between the piston and the cylinder liner. This is possible only, when the permanent deformations of the piston are reduced, which result from rapid piston temperature changes (thermal shocks). The newly developed composite aluminum alloy is characterized by high strength parameters and low dimensional hysteresis during repeated heating and cooling. The S12-U engine pistons are made of this material, and they had a slightly larger nominal diameter than the standard pistons. They were then mounted in the engine. The engine was tested on a test stand with the modern, accurate measuring equipment. Test results show, that the HC and CO content in the exhaust gas has been reduced, exhaust gas blowby to the crankcase declined, smoke emission was reduced and engine lubricating oil consumption was also reduced. Analysis of test results indicates that this has been achieved, mainly by reducing the clearances between the piston and the cylinder. The article provides detailed test results, mainly in the form of charts, on which one can compare the results, achieved by the engine with new material pistons with results of the same engine, but with the standard pistons.
Źródło:
Journal of KONES; 2016, 23, 4; 167-174
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Advantages of using composite alloys for internal combustion engine pistons
Autorzy:
Kowalski, Mirosław
Jankowski, Antoni
Powiązania:
https://bibliotekanauki.pl/articles/1833668.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
combustion engine piston
silumins
composite materials
tłoki silników spalinowych
siluminy
materiały kompozytowe
Opis:
Combustion engine pistons are subject to variable mechanical and thermal loads, and to variable deformations. The article presents the possibilities of using novel composite alloys for the construction of pistons for combustion engines. The novel alloys make it possible to meet high demands, especially for highly load designs, which practically cannot be met by conventional alloys used so far. These high requirements relate to the weight of the pistons, high temperature strength, alloy crystalline structure, abrasive wear resistance, dimensional stability. The requirements for pistons have an impact on the durability of the engine's operation, the level of noise emissions; exhaust gas blow-by into the crankcase, the level of emitted toxic exhaust components, mainly hydrocarbons. The research covered metallography (chemical composition, microstructure), material strength, abrasive wear, and thermal expansion. Investigations of the alloy crystallization process during casting were carried out using the Differential Thermal Analysis (DTA) method. The castings were used for metallographic tests. The strength of the samples was tested at room temperature (20°C) and elevated temperature (up to 350°C) on a testing machine equipped with a special climatic chamber. In particular, the article presents Thermal Derivative Analysis curves and representative microstructures of conventional AlSi12 alloy and the novel composite alloy; dependence of the tensile strength versus temperature for the samples of the novel alloy with various nickel content 2% and 4 %; comparison of the tensile strength for conventional alloy and the novel alloy at ambient and 250°C temperature; comparison of abrasive wear of samples, made of novel aluminium alloy and different cast iron; course of the linear expansion coefficient versus temperature for the conventional AlSi12 alloy with incorrect heat treatment; course of the linear expansion coefficient versus temperature for one of tested silumin alloy which expansion coefficient during sample cooling is smaller than during sample heating; course of the linear expansion coefficient versus temperature for the novel composite silumin alloy, after correct heat treatment. The great benefits of using this novel alloy and the introduction of novel alloying elements (in-Situ) have been confirmed in engine research.
Źródło:
Archives of Transport; 2020, 55, 3; 85-94
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technological applications of laser ablation in combustion engine pistons
Ablacja laserowa w zastosowaniach technologicznych dla tłoków silnika spalinowego
Autorzy:
Napadłek, W.
Powiązania:
https://bibliotekanauki.pl/articles/243652.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ablacja laserowa
warstwa powierzchniowa
tłok silnika spalinowego
usuwanie nawarstwień
laser ablation
surface layer
combustion engine piston
deposits removal
Opis:
The principles and possible applications of laser ablation technology in combustion engines pistons were described. Laser ablation removal of carbon deposits and other products of pistons using from pistons bottom was presented. The process of sequence removal of the deposits was controlled, so the pistons were not damaged. Nd: YAG laser with 10 Hz pulse work and wavelength X-- 1064 nm was applied during the process. In the laboratory experiments the deposits were removed from aluminum Akl12 and from ceramics on the basis of zirconium, sputtered on the pistons bottom as a thermal barrier (TBC). The exposition time of laser beam ranging from 10 to 20 ns was applied. Furthermore variation of such important parameters of laser treatment like energy density, beam scanning rate, impulse covering rate was applied, resulting with a set of parameters applicable for lab and even industrial scale. After deposits removal from surface layer, many micro- and macro cracks were noticed. The cracks created a net-like pattern, which was a result of cyclic heat-shock present during 400 hours long endurance test of combustion engine. The laser technique is an alternative for other methods because of its ecological reasons. It is also very precise and can be easily automated. It can be also applied in diagnosis, verification and also as a surface layer pretreatment for such a processes like thermal sputtering, or deposition of composite layers in important areas of pistons.
Opisano istotę oraz możliwości zastosowań technologicznych ablacji laserowej dla tłoków silnika spalinowego. Przedstawiono wybrane wyniki badań własnych w zakresie ablacyjnego usuwania nawarstwień, głównie w postaci nagaru na denku tłoka oraz innych osadów będących produktami eksploatacji tłoków. Usuwanie sekwencyjne nawarstwień realizowane było w sposób kontrolowany, dzięki temu nie następowało uszkadzanie podłoża tłoka. Ablacyjne oczyszczanie laserowe realizowane było przy użyciu lasera Nd: YAG o pracy impulsowej 10 Hz oraz długości promieniowania laserowego X = 1064 nm. W eksperymentach laboratoryjnych usuwano ww. nawarstwienia osadzone na podłożu ze stopu aluminium Ak12 oraz ceramiki na bazie cyrkonu, natryskanej na denko tłoka jako bariera termiczna (TBC). Stosując czas ekspozycji wiązki laserowej ok. 10 -20 ns oraz różne parametry obróbki laserowej: gęstość energii, prędkość skanowania wiązki, stopień przykrycia impulsów dobrano właściwe parametry obróbki, które mogą być stosowane nie tylko w warunkach laboratoryjnych, ale również w skali przemysłowej. Po usunięciu nawarstwień w warstwie wierzchniej barierowej powłoki ceramicznej stwierdzono bardzo liczne mikro-i makro-pęknięcia, tworzące regularną siatkę spękań, powstałą w czasie cyklicznych oddziaływań szoków cieplnych w 400 - godzinnej próbie trwałościowej silnika spalinowego o ZS. Opisywana technologia laserowa stanowi alternatywę dla innych metod oczyszczania, głównie ze względów ekologicznych, dużej precyzji oraz szerokich możliwości automatyzacji procesu. Może być wykorzystywana również w procesach diagnostyki i weryfikacji, a także, jako technologia przygotowania warstwy powierzchniowej do innych procesów technologicznych, np. natryskiwania cieplnego, osadzania powłok kompozytowych w newralgicznych strefach tłoków.
Źródło:
Journal of KONES; 2008, 15, 3; 382-388
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary tests on a combined heat and power unit fed with gas fuels
Autorzy:
Imiołek, M.
Boruta, G.
Piętak, A.
Matijošius, J.
Powiązania:
https://bibliotekanauki.pl/articles/241591.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
heat and power cogeneration
piston combustion engine
gas fuel
Opis:
This paper presents a model unit demonstrating the possibility of using a PBCHP10VB CHP unit driven by a piston combustion engine fed with gas fuels for heat and power cogeneration. A mobile unit available in the Department enables heat and power cogeneration at any place with available gas fuel, e.g. compressed in a pressure tank or from a production and transmission system. A radiator is connected to the unit’s heat connection for demonstrative purposes – this is the simplest model of a network using the heat generated by the unit, with the possibility of easy connection to another network for heating rooms and/or tap water instead of this radiator. Any three-phase load (e.g. a single phase converter) can be connected to the unit’s power connection. A constructed mobile power generator fed with alternative gas fuels (e.g. biogas) is described which can be used in the field in a biogas system for power generation with simultaneous heat recovery. The results of the first preliminary tests on the effect of the type of gas fuel used on the obtained electrical and thermal power and on the composition of exhaust gas from the driving combustion engine are presented. A plan for further tests is also outlined.
Źródło:
Journal of KONES; 2013, 20, 4; 123-127
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania statystycznych właściwości silnika spalinowego w statycznych warunkach pracy
The study of statistical properties of the internal combustion engine in static conditions
Autorzy:
Chłopek, Z.
Piaseczny, L.
Powiązania:
https://bibliotekanauki.pl/articles/222428.pdf
Data publikacji:
2004
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
silniki spalinowe
azot
układy pomiarowe
combustion piston engine
nitrogen
measuring systems
Opis:
Zmienność statycznych warunków pracy silnika spalinowego w zakresie wyższych częstotliwości ma charakter szumów, wynikających ze zjawisk nieuwzględnianych w jawny sposób w programie badań oraz z właściwości układów pomiarów. Poznanie właściwości tych szumów obserwowanych sygnałów statycznych ma istotne znaczenie w procedurach wyznaczania reprezentatywnych wartości wielkości traktowanych jako statyczne i wolnozmienne w warunkach nieuniknionych zakłóceń. Badania przeprowadzono w statycznych warunkach pracy silnika okrętowego Sulzer typu 6AL 20/24, określonych momentem obrotowym Me = 4,33 kN*m i prędkością obrotową n = 660 min–1. Do analiz wybrano wielkości charakteryzujące emisję zanieczyszczeń zawartych w spalinach w warunkach opisanych punktem pracy silnika: moment obrotowy, prędkość obrotową oraz stężenia tlenku węgla, węglowodorów i tlenków azotu. Badania przeprowadzono w dziedzinach: czasu, wartości procesu oraz częstotliwości. Stwierdzono, że badane przebiegi szumów, generowanych przez zjawiska nieuwzględniane w jawnej postaci w programie badań statycznych silnika spalinowego oraz przez układy pomiarów, mają w przeważającym zakresie charakter nieskorelowanych szerokopasmowych szumów normalnych. Wyniki badań uzasadniają m.in. zasadność uśredniania wyników pomiarów w warunkach statycznych oraz uśredniania synchronicznego w warunkach ustalonych.
Changeability in static work conditions of an internal combustion engine for higher frequencies appears as noises resulting from phenomena which are not taken into account in an explicit way in the investigation program or from properties of measurement systems. To discover the properties of the noises in the statistic signals being observed is important for procedures used to determine representative values of magnitudes treated as static and free-changeable in the conditions of unavoidable disturbances. The investigations were carried out for static work conditions of Sulzer 6AL 20/24 engine, for torque Me = 4,33 kN*m and rotational speed n = 660 min–1. To do analyses, selected were magnitudes characterizing pollution emission contained in exhaust gases in conditions described with engine work point: torque, rotational speed, carbon dioxide concentration, hydrocarbons and nitrogen oxides. The investigations were carried out for time, values of process and frequencies. It was found out that the distribution of the noises investigated, generated by the phenomena not taken into account in the explicit way in the in the investigation program or from properties of measurement systems are mainly of uncorrelated wideband normal noises character. The results of the investigations justify averaging the measurement results in statistical conditions or synchronic averaging in fixed conditions.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2004, R. 45 nr 1 (156), 1 (156); 71-88
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Test stand for a combined heat and power unit fed with alternative gas fuels
Autorzy:
Boruta, G.
Imiołek, M.
Piętak, A.
Powiązania:
https://bibliotekanauki.pl/articles/244809.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
power and heat cogeneration
piston combustion engine
gas fuel
biogas
Opis:
This paper presents the reasons for the development of gas-combined power and heat units and justification for testing the effect of the used gas fuel on the performance of such units. A PBCHP10VB CHP unit driven by a liquidcooled piston combustion engine adapted for feeding with gas fuels is described. The concept is presented for testing the effect of different gas fuel mixtures, including biogas, on this unit’s operation, mainly on the obtained electric power from the current generator and the temperature of the liquid cooling the driving engine heating up output water and on the composition of exhaust gas from this engine. A simple device for obtaining gas fuels containing different combustible gas mixtures is presented. The instruments used to check the composition of the obtained gas fuel and check exhaust gas from the engine are briefly described. The paper describes a test stand for testing the effect of different gas fuels on the operation of a PBCHP10VB gas CHP unit manufactured by Power Blessed Co., Ltd registered in Shanghai, constructed at the Department of Mechatronics and Technical and Information Technology Education of the Faculty of Technical Sciences at the University of Warmia and Mazury in Olsztyn.
Źródło:
Journal of KONES; 2013, 20, 4; 39-45
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The semi-Markov model of energy state changes of the main marine internal combustion engine and method for evaluating its operation during ship voyage
Autorzy:
Girtler, J.
Powiązania:
https://bibliotekanauki.pl/articles/260072.pdf
Data publikacji:
2011
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
operation
energy
semi-Markov process
piston internal combustion engine
Opis:
The article presents a method for evaluating the operation of internal combustion engines used as the main engines in the propulsion systems of sea-going ships in various operating conditions. This method enables calculating the engine operation value based on the theory of semi-Markov processes and mathematical statistics. What is noteworthy, the operation of the examined internal combustion engines is compared to a physical quantity which is expressed in the form of a number with the measure unit called joule-second. a model having the form of a semi-Markov process is proposed to describe the energy state changes taking place in the main engines during their operation. Also proposed is the use of the point and interval estimation at a given confidence level â for determining the value of the energy converted in the engine during its operation for the known and unknown standard energy deviation treated as the random variable. The semi-Markov model of changes of the energy converted in the engine during its operation is presented in a general form. The above model was used for determining the ship’s main engine operation, which is in the examined case a function of the energy converted in particular energy states, the expected value of the time of duration of these states and the probability of their existence. These probabilities compose the limiting distribution of the semi-Markov process, the values of which are the specified main engine energy states.
Źródło:
Polish Maritime Research; 2011, 4; 36-42
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method for diagnosing internal combustion engines with automatic ignition on the basis of torque measurement in traction conditions
Metoda diagnozowania silników spalinowych o zapłonie samoczynnym na podstawie pomiaru momentu obrotowego, w warunkach trakcyjnych
Autorzy:
Niziński, S.
Kupicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/329656.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
pojazd wojskowy
tłokowy silnik spalinowy
diagnostyka
military vehicle
internal combustion piston engine
diagnostics
Opis:
The paper presents a new method for diagnosing internal combustion engines with automatic ignition in traction conditions. Its substance involves determination of engine torque on the basis of recording of acceleration in road conditions. Extensive preliminary and primary experimental research has been conducted. Three variants of the internal combustion engine diagnostic model have been developed using a trivalent evaluation of states. Algorithms have been proposed to control a state and location of engine defects. The new method has been verified in traction conditions. A probability of a correct diagnosis of internal combustion engine is 0.85 ÷ 1.
W pracy przedstawiono nową metodę diagnozowania silnika spalinowego o ZS w warunkach trakcyjnych. Istota polega na wyznaczeniu momentu obrotowego silnika na podstawie rejestracji przyspieszenia w warunkach drogowych. Wykonano obszerne wstępne i zasadnicze badania eksperymentalne. Opracowano trzy warianty modelu diagnostycznego silnika spalinowego, z wykorzystaniem trójwartościowej oceny stanów. Zaproponowano algorytmy kontroli stanu i lokalizacji uszkodzeń silnika. Zweryfikowano nową metodę w warunkach trakcyjnych. Prawdopodobieństwo poprawnej diagnozy silnika spalinowego wynosi 0,85 ÷ 1.
Źródło:
Diagnostyka; 2008, 3(47); 125-136
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of energy and emission indicators of a piston engine supplied by a mixture of biogas
Autorzy:
Stępniak, D.
Surwiło, J.
Lampart, P.
Szymaniak, M.
Powiązania:
https://bibliotekanauki.pl/articles/175362.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
piston combustion engine
low caloric fuels
biogas
CO
CO₂
NOx emission
Opis:
The paper presents the methodology and results of research focused on experimental investigation of combustion of biogas fuels in a combustion piston engine. The study highlights the variability of exhaust gases parameters produced by the engine running in an idle mode and in a generation mode. The experimental analysis includes research about variability of temperature in the cylinders, depending on the composition of fuel used to supply the engine. The qualitative and quantitative analysis of exhaust gases extends on biogas substitutes with different proportions of CH₄ and CO₂. Characteristics of a piston combustion engine were created, including CO, CO₂, NOx emission indicators, for a range of engine load and fuel composition.
Źródło:
Transactions of the Institute of Fluid-Flow Machinery; 2016, 134; 109-120
0079-3205
Pojawia się w:
Transactions of the Institute of Fluid-Flow Machinery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Statistical investigations of fast changeable processes occurring in ship piston combustion engine
Autorzy:
Chłopek, Z.
Piaseczny, L.
Powiązania:
https://bibliotekanauki.pl/articles/259250.pdf
Data publikacji:
2005
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
piston combustion engine
fast changeable processes
stochastic processes
high frequency noise
Opis:
Combustion piston engine is one of the devices in which fast changeable processes occur in operational conditions. In this paper are presented basic problems associated with research on fast changeable processes occurring in diesel engines, exemplified by the processes of indicated pressure and fuel pressure injected to engine's cylinder. Dynamical characteristics of the investigated processes were analyzed and problems of synchronous averaging of pseudo-periodical signals were considered in order to limit high frequency noise content in useful signal. Some limitations of elimination effectiveness of high frequency noise from tested signals have been revealed.
Źródło:
Polish Maritime Research; 2005, 2; 10-16
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
External speed characteristics in engine with multi-stage fuel injection
Autorzy:
Ambrozik, A.
Ambrozik, T.
Kurczyński, D.
Łagowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/245939.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
piston internal combustion engine
characteristics
engine work parameters
test bench investigations
engine fuels
Opis:
Increasingly higher demands pnt on piston internal combustion engines arę aimed at reducing their harmful impact on the natural environment. This refers primarily to nitrogen oxides, particulate matter and noise emissions. The reduction in emissions ofnoxious components oj exhaust gases in engines is achieved by means of, among others, the use of catalysts decreasing nitrogen oxide emissions, particulate matter filters and oxidising catalysts decreasing carbon monoxide and hydrocarbon emissions. Common Rail injection systems make it possible to increase the engine power, and to reduce fuel consumption, exhaust gas toxicity and noise produced by engines. With Common Rail systems, the pattern of fuel injection process can be designed, consequently the combustion process can be controlled. The paper presents the results of test bench investigations into a compression ignition 1.3 Multijet engine with multistage fuel injection, which is manufactured in Poland by Fiat-GM Powertrain Polska Company. The tests were conducted at a stand constructed at the Heat Engines Laboratory ofthe Kielce University of Technology. The scope of investigations included determining economic and energetic parameters of the engine work, and also environmental parameters, such as the concentration of nitrogen oxides NOX, carbon monoxide CO and carbon dioxide CO2 in exhaust gases, and exhaust gas smokiness. In tests, the engine operated under speed conditions and it was fuelled by two commercial diesel oils that had different physical and chemical properties.
Źródło:
Journal of KONES; 2010, 17, 1; 9-16
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the possible increasing of efficiency of ship power plant with the system combined of marine diesel engine, gas turbine and steam turbine, at the main engine - steam turbine mode of cooperation
Autorzy:
Dzida, M.
Powiązania:
https://bibliotekanauki.pl/articles/258636.pdf
Data publikacji:
2009
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
combined systems
gas turbine
piston combustion engine
ship power plants
steam turbine
Opis:
This paper presents a concept of a ship combined high-power system consisted of main piston engine and associated with it: gas power turbine and steam turbine subsystems, which make use of energy contained in exhaust gas from main piston engine. The combined system consisted of a piston combustion engine and an associated with it steam turbine subsystem, was considered. An algorithm and results of calculations of the particular subsystems, i.e. of piston combustion engine and steam turbine, are presented. Assumptions and limitations taken for calculations, as well as comparison of values of some parameters of the system and results of experimental investigations available from the literature sources, are also given. The system’s energy optimization was performed from the thermodynamic point of view only. Any technical – economical analyses were not carried out. Numerical calculations were performed for a Wärtsilä slow-speed diesel engine of 52 MW output power.
Źródło:
Polish Maritime Research; 2009, 1; 47-52
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza różnic konstrukcji silników spalinowych samochodowych i do samolotów ultralekkich
Analysis of combustion engine design differences between vehicle and ultralight aircraft engines
Autorzy:
Świątek, P.
Fuć, P.
Powiązania:
https://bibliotekanauki.pl/articles/133434.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
silnik lotniczy tłokowy
ultralekkie statki powietrzne
piston internal combustion engine
ultralight aircraft
Opis:
Samoloty bardzo lekkie i ultralekkie są jednymi ze środków transportu, które mogą zapewnić w przyszłości szybki transport między aglomeracjami miejskimi. Źródłem napędu dla takich samolotów są tłokowe silniki spalinowe. W artykule dokonano analizy różnic konstrukcyjnych między nimi i silnikami samochodowymi. Przedstawiono wybrane silniki dostępne na rynku. Przeanalizowano budowę korpusu i głowicy; układy rozrządu; układy dolotowe, wylotowe oraz zasilania; układy napędowe i mocowanie silnika a także bezpieczeństwo i wymogi prawne. Wykazano istotne różnice między obydwiema konstrukcjami, wynikające z odmiennych wymagań i warunków pracy.
Very light and ultra-light aircraft are among the means of transport that can deliver high-speed transport between urban centers in the future. Propulsion systems for such aircraft use piston internal combustion engines. The article analyzes the structural differences between them and automotive engines. Selected engines that are available on the market have been presented. The construction of the body and head; the timing systems; intake systems, exhaust and power supply; powertrains and engine mounts as well as safety and regulatory requirements were analyzed. There were significant differences between the two structures, resulting from the different requirements and operating conditions.
Źródło:
Combustion Engines; 2015, 54, 3; 703-707
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies