Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "coal bed" wg kryterium: Temat


Wyświetlanie 1-44 z 44
Tytuł:
Unconventional hydrocarbon resources of Greece
Autorzy:
Tsirambides, A.
Powiązania:
https://bibliotekanauki.pl/articles/2059636.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
shale gas
methane hydrates
coal bed gas
Greece
Opis:
Intensive exploration of probable conventional hydrocarbon reservoirs in Greece is taking place, through the interpretation of seismic profiles and of abundant surface geological data. The unconventional hydrocarbon potential of the country is unknown, as detailed investigations are lacking. The most important rock formations which may contain shale gas are found in the land and offshore basins of northeastern, north-central, and western Greece. A re-evaluation of the data from all boreholes is needed, on the basis of new information, with the aim of identifying possible reserves of unconventional hydrocarbons retained in highly compacted fine-grained strata. Methane hydrates have been detected in the submarine Anaximander Mountains, east of Rhodes Island. They cover an area of about 46 km2 and the volume of methane is estimated at 2.6–6.4 trillion m3. The low content of the Greek lignites in gaseous hydrocarbons and the widespread tectonics in the Hellenic Peninsula are the main factors which prevented large gas accumulations in its 14 main coal deposits. However, additional research is needed to evaluate the coal-bed gas potential of the country.
Źródło:
Geological Quarterly; 2015, 59, 3; 479--490
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CO2 storage potential of sedimentary basins of Slovakia, the Czech Republic, Poland and the Baltic States
Autorzy:
Šliaupa, S.
Lojka, R.
Tasáryová, Z.
Kolejka, V.
Hladík, V.
Kotulová, J.
Kucharič, L.
Fejdi, V.
Wójcicki, V.
Tarkowski, R.
Uliasz-Misiak, B.
Šliaupienė, R.
Nulle, I.
Pomeranceva, R.
Ivanova, O.
Shogenova, A.
Shogenov, K.
Powiązania:
https://bibliotekanauki.pl/articles/2059731.pdf
Data publikacji:
2013
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
CO2 geological storage
saline aquifer
coal bed
EOR
ECBM
Opis:
It has been increasingly realised that geological storage of CO2 is a prospective option for reduction of CO2 emissions. The CO2 geological storage potential of sedimentary basins with the territory of Slovakia, the Czech Republic, Poland, and the Baltic States is here assessed, and different storage options have been considered. The most prospective technology is hydrodynamic trapping in the deep saline aquifers. The utilisation of hydrocarbon (HC) fields is considered as a mature technology; however storage capacities are limited in the region and are mainly related to enhanced oil (gas) recovery. Prospective reservoirs and traps have been identified in the Danube, Vienna and East Slovakian Neogene basins, the Neogene Carpathian Foredeep, the Bohemian and Fore-Sudetic Upper Paleozoic basins, the Mesozoic Mid-Polish Basin and the pericratonic Paleozoic Baltic Basin. The total storage capacity of the sedimentary basins is estimated to be as much as 10170 Mt of CO2 in deep saline aquifer structures, and 938 Mt CO2 in the depleted HC fields. The utilisation of coal seams for CO2 storage is related to the Upper Silesian Basin where CO2 storage could be combined with enhanced recovery of coal-bed methane.
Źródło:
Geological Quarterly; 2013, 57, 2; 219--232
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The fluid flow modeling procedure including a critically stressed fracture analysis of coalbed methane reservoir: a case study of Upper Silesian Coal Basin, Poland
Autorzy:
Kępiński, Michał
Ryder, Paweł
Dudek, Jacek
Podsobiński, Daniel
Powiązania:
https://bibliotekanauki.pl/articles/2202858.pdf
Data publikacji:
2023
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
coal bed methane
critically stressed fractures
fractures
fracturing treatment
Upper Silesian Coal Basin
Opis:
The geomechanical modeling turned out to be an essential component of the hydrocarbon exploration assisting reduction of risk of drilling issues and optimization of hydraulic fracturing treatment. This study provides a workflow of critically stressed fracture (CSF) analysis dedicated for coal layers. The main focus of the paper is applying the 1D mechanical models and following modelling of hydraulic fracturing treatment to describe the fracture behavior under the impact of the stresses at the wellbore scale. Another objective of presented study is demonstration of benefits of 1D and 3D CSF analysis to understand fracture contribution to gained volume of hydrocarbon after fracturing of coal seam. Interpretation of fracture orientation and their behavior is vital to effective development of coal bed methane (CBM) resources as the CSF can be responsible for considerable part of CBM production. Natural fractures and faults contribute to fluid flow through rock. It is often noted that natural fractures may not be critically stressed at ambient stress state. However, during stimulation the optimally oriented natural fracture sets have an inclination to become critically stressed. Hence, understanding of the recent stress state and fracture orientations is significant for well planning and fracturing design. The outcome of this study are comprehensive 1D mechanical Earth models (MEMs) for analyzed wells and explanation of behavior of identified CSF under variable stress state as well as understanding of the connectivity of natural fractures within zone subjected to fracturing treatment.
Źródło:
Geology, Geophysics and Environment; 2023, 49, 1; 53--70
2299-8004
2353-0790
Pojawia się w:
Geology, Geophysics and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Increase accuracy of system operation of unloading heavy coal sinks and middlings in jigs
Povyshenie tochnosti raboty sistemy razgruzki porody i promprodukta v ostadochnojj mashine
Autorzy:
Lehtsier, O.
Powiązania:
https://bibliotekanauki.pl/articles/792342.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
coal bed
process parameter
automatic control
oscillatory process
delamination
float sensor
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2014, 14, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coalification as a process determining the methane adsorption ability of coal seams
Autorzy:
Dutka, Barbara
Godyń, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/1853877.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metan
petrografia
adsorpcja
coal bed methane
degree of coalification
petrography
adsorption capacity
Opis:
The paper presents the results of a study of methane adsorption on coal samples with various degrees of metamorphism, coming from the Polish and Czech parts of the Upper Silesian Coal Basin (USCB). The range of coalification of the samples was from bituminous with vitrinite reflectance Ro equal to about 0.5% to para-anthracite coals with Ro equal to over 2%. The methane adsorption capacity was determined at the temperature 303 K for each of the studied coal seams. Methane adsorption isotherms were approximated using the Langmuir model. The relationship between the Langmuir isotherm parameters (am and PL) and the degree of coalification was presented. It was shown that the degree of coalification of the coal substance affects the adsorption ability of coal with respect to methane and determines the value of the Langmuir isotherm parameters. The study was conducted in order to present the distribution of adsorption capacity of Upper Silesian coals in relation to improving work safety in active mines as well as designing technologies that use coal bed methane (CBM) from balance and off-balance resources.
Źródło:
Archives of Mining Sciences; 2021, 66, 2; 181-195
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda pozyskiwania pierwotnych nośników energii ze złóż węgla kamiennego na drodze odmetanowania i zgazowania in situ
A method of obtaining primary energy carriers from hard coal beds via methane drainage and in-situ gasification
Autorzy:
Czaja, P.
Klich, J.
Tajduś, A.
Powiązania:
https://bibliotekanauki.pl/articles/282726.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
węgiel kamianny
odmetanowanie pokładu
podziemne zgazowanie węgla
hard coal
methane drainage of a coal bed
underground coal gasification
Opis:
Bez względu na to, co wymyślą Urzędnicy Unii Europejskiej, świat rozwijał się będzie wedle scenariuszy zapisanych w mechanizmach Jego powstania i potwierdzonych historią jego przemian trwająca już bez udziału Człowieka miliardy lat. Paliwa kopalne są naturalnym rezerwuarem energii potrzebnej ludzkości. Fałszywe twierdzenia o szkodliwości dla rodzaju ludzkiego i dla ziemskiej planety, korzystania z paliw kopalnych sprawiają, że niektóre grupy ludności lokalnej, nie mając wszechstronnej wiedzy, są skłonne do protestów, a nawet do generowania konfliktów społecznych (Badera 2010), będących wyrazem niechęci do wydobywania jakichkolwiek kopalin. Na fali zwalczania tradycyjnych nośników energii podjęto próby zastąpienia ich energią z tzw. źródeł odnawialnych (OZE) ciągle udoskonalanych, ale też ciągle zbyt mało efektywnych. Poszukuje się też bardziej efektywnego wykorzystania paliw kopalnych przez wprowadzenie niekonwencjonalnych technologii pozyskiwania energii z klasycznych surowców energetycznych. Przy wysokich cenach nośników węglowodorowych (ropy i gazu) zgazowanie węgla tak naziemne jak też podziemne wydaje się być technologią innowacyjną zbieżną ze współczesnymi oczekiwaniami zarówno producentów energii, ale przede wszystkim obrońców środowiska. Znane dotychczas i ciągle badane technologie podziemnego zgazowania sprowadzają się do dwóch zasadniczych metod: - bezszybowej - wiertniczej, - szybowej z wykorzystaniem podziemnej infrastruktury istniejącej kopalni. W niniejszej pracy zostanie zaprezentowana metoda mieszana szybowo-wiertnicza, za pomocą której proponować się będzie wydobycie pierwotnych nośników energii (metanu i gazu syntezowego) ze złóż zalegających na dużej głębokości i z tego powodu zaliczonych do zasobów pozabilansowych. Metoda szybowo-wiertnicza nie może być traktowana jako alternatywa dla klasycznego wydobycia węgla, ale jako jego uzupełnienie i tańsze sięgniecie po zasoby praktycznie leżące poza możliwościami technicznymi wydobycia metodą klasyczną, głównie ze względu na bardzo duże zagrożenia naturalne oraz wysokie koszty ich zwalczania
Regardless of EU policies, the world will continue its natural course of development in spite of the finite participation of man. Fossil fuels are a natural reservoir of energy which humanity needs. False claims about the harmfulness of human use of those fuels encourages people to protest against exploitation of all kinds of mineral resources, including generations of local conflicts (Badera 2010). Modern science has made great progress in replacing fossil fuels with energy from renewable sources. This alternative is continually improving, but still not effective enough. A more effective utilization of fossil fuels remains an objective to be fulfilled through the introduction of non-conventional technologies of obtaining energy from traditional energy-producing raw materials. With the high prices of hydrocarbon carriers (petroleum and gas), both surface and underground coal gasification seem to be innovative technologies meeting the contemporary expectations of energy producers and, above all, environmentalists. The technologies of underground coal gasification known and still being examined today involve two basic methods: - shaftless, using boreholes drilled from the surface to the coal seams - shaft structure method, using the underground infrastructure of an already existing coal mine. This article presents a mixed shaft-drilling method and proposes the extraction of primary energy carriers (methane and syngas) from beds located at great depths (consequently classified as off-balance sheet resources). The mixed shaft structure and boreholes method cannot be understood as an alternative to classic coal mining, but rather as its supplement and as a cheaper way of gaining access to resources which, from a technical point of view, are practically impossible to extract through the classic mining method, mainly due to very serious natural hazards and the high costs of eliminating those hazards.
Źródło:
Polityka Energetyczna; 2013, 16, 3; 83-98
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An overview of coal bed methane potential in Polish coal basins
Autorzy:
Cieślak, K.
Hendel, J.
Kuczyński, S.
Powiązania:
https://bibliotekanauki.pl/articles/299024.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
Lower Silesian Coal Basin (LSCB)
Lubin Coal Basin (LCB)
RECOPOL
Upper Silesia Coal Basin (USCB)
coal bed methane (CBM)
Opis:
Coal bed methane (CBM) may become an important source of energy in Upper Silesian Coal Basin. Coal bed methane in Poland occurs within three coal basins of which the best recognized and most promising is the Upper Silesian Coal Basin. Approximately 80.1% of proved balance of coal deposits resources in Poland occurs in the Upper Silesian Coal Basin, where 50 fields are operated by 28 mines. Thus, since early 90s of the 20th century the USCB is attractive for foreign companies which perform evaluation of coal bed methane obtaining possibility as main fossil. However, all previous attempts to commercial production of CBM did not bring expected results, but they constitute extensive information database for current and future research towards CBM exploitation. Prognostic resources of coal bed methane in USCB are estimated to 107 bln m3. Recoverable balance resources are estimated to 87.6 bln m3. Much smaller perspectives are related to the poorly identified regions of Lublin Coal Basin and Lower Silesian Coal Basin. It is estimated that balance resources of hard coal in LCB, represents approximately 19.2% of Polish hard coal balance resources.
Źródło:
AGH Drilling, Oil, Gas; 2013, 30, 4; 433-441
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stimulation of unconventional hydrocarbon reservoirs
Autorzy:
Szabo, D.
Pinka, J.
Stolićny, E.
Powiązania:
https://bibliotekanauki.pl/articles/299289.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
Tight gas sand
shale gas
coal bed seam unconventional
intensification
fracturing
propant
mesh
Darcy’s law
Opis:
In the "new age" oil and gas industry came more and more into focus term of unconventional hydrocarbons. Gained experience and success in the United States tight gas sand reservoirs Piceance, Anadarko, Greater Green, Lobo fields confirmed the hidden potential of unconventional hydrocarbon resources. In some production and development areas called coal bed seam, shale gas and tight sand reservoirs without intensifying operations isn't possible to produce commercial gas volumes. Used practises and gained large experiences in the crude oil fields are commonly used in the shale and tight gas fields across the United States. Application of these technologies of stimulation methods like fracturing in Europe is at the very beginning. Pioneer investors are waiting in all Europe for the well testing results from the first dozen fractured shale gas and tight sand reservoirs. Test results could have significant influence on the future planned massive drilling campaign of exploration of the unconventional hydrocarbon resources
Źródło:
AGH Drilling, Oil, Gas; 2014, 31, 2; 307-313
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of the distribution of drilling boreholes in methane production from coal seams
Autorzy:
Wątor, Anna
Chećko, Jarosław
Urych, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/1839034.pdf
Data publikacji:
2020
Wydawca:
Główny Instytut Górnictwa
Tematy:
CBM
coal bed methane
numerical simulations
methane production
metan z pokładów węgla
symulacja numeryczna
produkcja metanu
Opis:
The paper presents an evaluation of methane production from coal seams. The Warszowice-Pawłowice Północ deposit was selected for numerical modelling of methane production. The numerical model was made for a fragment of this deposit of about 2 km2. The numerical model was constructed for 6 seams. Three deposits were selected for simulation of methane production. Three horizontal boreholes were designed within the model area, referring to the existing Suszec19 borehole. A number of simulations related to methane production from the selected deposits were performed. They included different variants of the number of boreholes and also took into account the z-pinnate method. The analyses proved that the most advantageous is the production of 3 directional boreholes simultaneously with the z-pinnate method. For this variant the degree of methane production was 21.9% of the estimated resources.
Źródło:
Journal of Sustainable Mining; 2020, 19, 4; 272-285
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gospodarcze wykorzystanie metanu z pokładów węgla JSW S.A. w instalacjach energetycznych
Economical utilization of coal-bed methane from Jastrzębie Coal Company in cogeneration power system
Autorzy:
Tor, A.
Gatnar, K.
Powiązania:
https://bibliotekanauki.pl/articles/350591.pdf
Data publikacji:
2005
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
metan pokładów węgla
silniki gazowe
skojarzony układ energetyczny
coal bed methane
gas engines
cogeneration power system
Opis:
Artykuł przedstawia ujęcie i wykorzystanie metanu z obszaru górniczego JSW S.A. w latach 2000-2004. Prezentuje strukturę wykorzystania w roku 2004 oraz zrealizowane inwestycje energetyczne w latach 1997-2004, inwestycje w toku i planowane do realizacji w latach 2006-2007 (realizowane samodzielnie przez JSW S.A. i wspólnie z SEJ S.A.). Omówiono skojarzony układ energetyczny w kopalni "Krupiński" oraz układ energetyczno-chłodniczy w KWK "Pniówek" w aspekcie technicznym, ekonomicznym i ekologicznym ograniczenia emisji metanu do atmosfery.
Paper presents the resources of coal bed methane in the region of Jastrzębie Coal Company (JSW SA) coming from both active and abandoned coal mines. It is also presented how the gas is being used in heat and power plants grouped in Energy Company Jastrzębie (SEJ SA) and in new cogeneration and trigeneration installations with gas engines at Suszec and Pniówek plants. In the summary the role of combined production plants for energy delivery to coal mines is discussed as well as further possibilities of coalbed methane utilization is plants based on gas engines are presented.
Źródło:
Górnictwo i Geoinżynieria; 2005, 29, 4; 177-181
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Perspektywy geologicznej sekwestracji CO2 w połączeniu z odzyskiem metanu z pokładów węgla w warunkach Górnośląskiego Zagłębia Węglowego
Prospects for geological storage of CO2 with enhanced coal bed methane recovery in the Upper Silesian Coal Basin
Autorzy:
Jureczka, J.
Chećko, J.
Krieger, W.
Kwarciński, J.
Urych, T.
Powiązania:
https://bibliotekanauki.pl/articles/2062890.pdf
Data publikacji:
2012
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
składowanie CO2
metan pokładów węgla
ECBM
Górnośląskie Zagłębie Węglowe
CO2 storage
coal bed methane
Upper Silesian Coal Basin
Opis:
W artykule przedstawiono wstępną ocenę możliwości składowania CO2 w zalegających głęboko, nieeksploatowanych pokładach węgla Górnośląskiego Zagłębia Węglowego, w połączeniu z odzyskiem metanu z tych pokładów (technologia ECBM). Punktem wyjścia było opracowanie kryteriów wyznaczania potencjalnych składowisk, uwzględniających między innymi ochronę złóż węgla kamiennego oraz dostępność pokładów do możliwej eksploatacji w przyszłości. Z przeprowadzonej analizy regionalnej, której podstawowym wskaźnikiem była metanonośność pokładów węgla, w interwale głębokości 1000–2000 m, wynika, że korzystne warunki lokalizacji składowisk występują głównie w centralno-południowej części GZW. W tej części zagłębia potencjalne pod względem składowania CO2 są przede wszystkim pokłady węgla górnośląskiej serii piaskowcowej oraz serii mułowcowej, zalegające w obszarach oddalonych od czynnych kopalń, poniżej głębokości 1250–1300 m. Wstępne oszacowanie pojemności składowania CO2 wykonano w rejonie badawczym Pawłowice–Mizerów, dla którego opracowano statyczny model strukturalno-parametryczny pokładów węgla górnośląskiej serii piaskowcowej. Obliczone pojemności składowania dla tych pokładów oszacowane zostały na 8,3 Mt.
This paper presents a preliminary study of CO2 storage possibility in deep, unexploited coal seams of the Upper Silesian Coal Basin along with enhanced coal bed methane recovery (ECBM). The first task was to compile a list of criteria that must be met by perspective storage locations including among others protection of coal deposits and their availability for future exploitation. Regional analysis, which focused mainly on methane content of the coal seams located at the depths between 1000–2000 m, implies that favourable conditions for location of CO2 storage are present primarily in the central-southern part of the USCB. In this area coal seams of the Upper Silesian Sandstone Series and Mudstone Series, which are located far from active mines at depths exceeding 1250–1300 m, hold most promise for CO2 storage. Preliminary assessment of CO2 storage capacity was performed in the Pawłowice-Mizerów case study area. A static structural-parametric model of the Upper Silesian Sandstone Series coal seams has been created for that area. Storage capacity for those coal seams is estimated at 8.3 Mt.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2012, 448 (1); 117--131
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrid technology of hard coal mining from seams located at great depths
Technologia hybrydowa eksploatacji węgla kamiennego z pokładów zalegających na dużych głębokościach
Autorzy:
Czaja, P.
Kamiński, P.
Klich, J.
Tajduś, A.
Powiązania:
https://bibliotekanauki.pl/articles/220129.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odmetanowanie pokładów węgla
podziemne zgazowanie węgla
węgiel kamienny
hybrydowa eksploatacja
hard coal
methane drainage of a coal bed
underground coal gasification
hybrid coal exploitation
Opis:
Learning to control fire changed the life of man considerably. Learning to convert the energy derived from combustion of coal or hydrocarbons into another type of energy, such as steam pressure or electricity, has put him on the path of scientific and technological revolution, stimulating dynamic development. Since the dawn of time, fossil fuels have been serving as the mankind’s natural reservoir of energy in an increasingly great capacity. A completely incomprehensible refusal to use fossil fuels causes some local populations, who do not possess a comprehensive knowledge of the subject, to protest and even generate social conflicts as an expression of their dislike for the extraction of minerals. Our times are marked by the search for more efficient ways of utilizing fossil fuels by introducing non-conventional technologies of exploiting conventional energy sources. During apartheid, South Africa demonstrated that cheap coal can easily satisfy total demand for liquid and gaseous fuels. In consideration of current high prices of hydrocarbon media (oil and gas), gasification or liquefaction of coal seems to be the innovative technology convergent with contemporary expectations of both energy producers as well as environmentalists. Known mainly from literature reports, underground coal gasification technologies can be brought down to two basic methods: - shaftless method - drilling, in which the gasified seam is uncovered using boreholes drilled from the surface, - shaft method, in which the existing infrastructure of underground mines is used to uncover the seams. This paper presents a hybrid shaft-drilling approach to the acquisition of primary energy carriers (methane and syngas) from coal seams located at great depths. A major advantage of this method is the fact that the use of conventional coal mining technology requires the seams located at great depths to be placed on the off-balance sheet, while the hybrid method of underground gasification enables them to become a source of additional energy for the economy. It should be noted, however, that the shaft-drilling method cannot be considered as an alternative to conventional methods of coal extraction, but rather as a complementary and cheaper way of utilizing resources located almost beyond the technical capabilities of conventional extraction methods due to the associated natural hazards and high costs of combating them. This article presents a completely different approach to the issue of underground coal gasification. Repurposing of the already fully depreciated mining infrastructure for the gasification process may result in a large value added of synthesis gas production and very positive economic effect.
Od kiedy człowiek nauczył się panować nad ogniem Jego życie uległo znaczącym zmianom, natomiast kiedy energię spalanego węgla czy węglowodorów nauczył się zamieniać na inny rodzaj energii jak ciśnienie pary czy energię elektryczną wkroczyła na drogę rewolucji naukowo-technicznej i dynamicznego rozwoju. Od zarania dziejów paliwa kopalne są naturalnym rezerwuarem energii potrzebnej ludzkości w co-raz większej ilości. Kompletnie niezrozumiałe negowanie korzystania z paliw kopalnych sprawiają, że niektóre grupy ludności lokalnej, nie mając wszechstronnej wiedzy, są skłonne do protestów, a nawet do generowania konfliktów społecznych, będących wyrazem niechęci do wydobywania jakichkolwiek kopalin. Procesem znamiennym dla naszych czasów jest poszukiwanie coraz efektywniejszych sposobów wykorzystania paliw kopalnych przez wprowadzenie niekonwencjonalnych technologii pozyskiwania energii z klasycznych surowców energetycznych. Afryka Południowa w czasach apartheidu pokazała, że mając tani węgiel kamienny - jako surowiec energetyczny można z łatwością. zabezpieczyć w całości zapotrzebowanie na paliwa płynne i gazowe. Obecnie przy wysokich cenach nośników węglowodorowych (ropy i gazu) zgazowanie lub upłynnianie węgla, wydaje się być w naszych warunkach technologią innowacyjną. Zbieżną ze współczesnymi oczekiwaniami zarówno producentów energii, jak też obrońców środowiska. Znane, głównie z doniesień literaturowych technologie podziemnego zgazowania węgla sprowadzają się do dwóch zasadniczych metod: - bezszybowej - wiertniczej, w której zgazowywane złoże udostępnione jest otworami wiertniczymi wywierconymi z powierzchni terenu, -szybowej, w której do udostępnienia złoża wykorzystuje się podziemna. infrastrukturę istniejącej kopalni. W niniejszej pracy zostanie zaprezentowana metoda mieszana szybowo-wiertnicza, za pomocą której proponować się będzie pozyskanie pierwotnych nośników energii (metanu i gazu syntezowego) ze złóż węgla kamiennego, zalegających na dużej głębokości. Dużym atutem metody jest fakt, że przy klasycznej technologii wydobycia węgla, jego pokłady zaliczone na dużej głębokości zaliczone musza. być do zasobów pozabilansowych, natomiast przy podziemnym zgazowaniu metoda. hybrydowa. mogą stać się źródłem dodatkowej energii dla gospodarki. Należy jednak podkreślić, że metoda szybowo-wiertnicza nie może być traktowana jako alternatywa dla klasycznego wydobycia węgla, ale jako jego uzupełnienie i tańsze sięgniecie po zasoby praktycznie leżące poza możliwościami technicznymi wydobycia metoda. klasyczną głownie ze względu na bardzo duże zagrożenia naturalne oraz wysokie koszty ich zwalczania. Artykuł prezentuje kompletnie inne podejście do problemu podziemnego zgazowania węgla kamiennego. Korzystając w procesie zgazowania z infrastruktury górniczej już w pełni zamortyzowanej wartość dodana w produkcji gazu syntezowego może być bardzo duża, a efekt ekonomiczny bardzo korzystny.
Źródło:
Archives of Mining Sciences; 2014, 59, 3; 575-590
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości zagospodarowania metanu występującego w stropowych partiach złóż węgla Bzie-Dębina 1 oraz Gołkowice (Górnośląskie Zagłębie Węglowe)
The possibilities of methane extraction from the uppermost part of Carboniferous in coal deposits Bzie-Dębina 1 and Gołkowice (the Upper Silesian Coal Basin)
Autorzy:
Kędzior, S.
Powiązania:
https://bibliotekanauki.pl/articles/282214.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
metan
metanonośność
strop karbonu
ujęcie metanu
Górnośląskie Zagłębie Węglowe
coal-bed methane
methane content
Carboniferous roof
methane collecting
Upper Silesian Coal Basin
Opis:
Wartykule przeprowadzono analizę występowania przystropowej strefy metanonooenej, obejmującej wtórnie nasycone metanem pokłady węgla występujące w bliskim sąsiedztwie stropu karbonu w obszarach Bzie-Dębina oraz Gołkowice. Z uwagi na wykazany w sąsiednich złożach związek pomiędzy występowaniem metanu w przystropowej strefie i ukształtowaniem stropu węglonooenych utworów karbonu, podobną zależnooeć zbadano w omawianym złożu. Przedyskutowano również możliwe sposoby ujęcia metanu w celu zminimalizowania zagrożenia metanowego na przyszłych poziomach eksploatacyjnych w polu Bzie-Dębina 1 Zachód. Wzięto pod uwagę ujęcie metanu systemami podziemnego odmetanowania, podobnie jak czyni się to w obecnie czynnych kopalniach węgla, ze szczególnym uwzględnieniem odmetanowania wyprzedzającego, a także odprowadzenie metanu powierzchniowymi otworami wierconymi do stropu karbonu metodą poeksploatacyjnego odmetanowania zrobów (GOB Wells), ponieważ sposób ten praktykowany jest np. w amerykańskich zagłębiach węglowych. Ten drugi sposób ujęcia metanu byłby nowatorski w warunkach polskich i wymagałby przeprowadzenia dodatkowych badań. Ujęcie i wykorzystanie metanu ze złoża Bzie-Dębina 1 przyczyni się z jednej strony do redukcji zagrożenia gazowego na przyszłych poziomach eksploatacyjnych, a z drugiej pozytywnie wpłynie na bilans energetyczny kopalń Jastrzębskiej Spółki Węglowej.
The occurrence of methane zone located close to Miocene cover was presented. The dependence between methane occurrence in the investigated zone and the configuration of the roof of Carboniferous complex was analyzed, according to indicated dependence in the neighboring areas. The other issues discussed here are the possibly ways of methane collection in order to reduce the methane hazard in the area of the future coal mining. The possibly ways of methane collecting are the underground drainage system, because this way is applied in many working coal mines, methane drainage applying before the coal exploitation was particularly discussed, and also methane collecting using the GOB method, which is applied elsewhere, especially in the USA. The latter way mentioned above would be an inventive in Polish coal mines and it would need many additional studies. Taking and collecting of the coalminemethane from Bzie-Dębina 1 coal deposit will, from the one hand, reduce methane hazard in future coal mine and from the other, positively influence the energetic balance of Jastrzębie Coal Company mines.
Źródło:
Polityka Energetyczna; 2011, 14, 1; 197-212
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zagospodarowanie metanu z pokładów węgla - stan obecny i perspektywy
Commercial Development of Coal Bed Methane - current situation and prospects
Autorzy:
Kaliski, M.
Wojciechowski, R.
Szurlej, A.
Powiązania:
https://bibliotekanauki.pl/articles/283140.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
niekonwencjonalne złoża gazu ziemnego
metan z pokładów węgla
zasoby metanu
węgiel kamienny
unconventional gas resources
coal bed methane (CBM)
methane resources
hard coal
Opis:
W artykule dokonano przeglądu doświadczeń krajowych w zagospodarowaniu metanu z pokładów węgla w latach 2002-2012 oraz przeanalizowano rozwój wykorzystania tego gazu w USA i Australii. Za wyborem tych państw przemawia odpowiednio skala oraz rozwój dynamiki wydobycia, a także plany Australii w zakresie eksportu metanu poprzez jego upłynnianie (LNG). Pozostałymi państwami wydobywającymi metan z pokładów węgla na skalę przemysłową są Chiny, Kanada oraz Indie. Ze względu na sposób pozyskania metanu z węgla wyróżnia się kilka rodzajów tego gazu i dla usystematyzowania zestawiono ich nazwy oraz wskazano różnice pomiędzy nimi. Dokonano przeglądu zasobów metanu z pokładów węgla w Polsce na tle zasobów światowych oraz przybliżono sposoby zagospodarowania tego gazu oraz rozwój technologii zagospodarowania. Przenalizowano zależność pomiędzy metanowością bezwzględną a poziomem wydobycia węgla kamiennego w Polsce oraz poziom zużycia metanu do produkcji energii elektrycznej i ciepła. JSW ma największe doświadczenia w zakresie energetycznego wykorzystania metanu. Przybliżono także doświadczenia pozostałych spółek węglowych w zagospodarowaniu metanu (KW i KHW). Oceniono rozwój zagospodarowania metanu z pokładów węgla z punktu widzenia systemu wsparcia wprowadzonego ustawą z dnia 8 stycznia 2010 r. o zmianie ustawy - Prawo energetyczne oraz o zmianie niektórych innych ustaw. W podsumowaniu przywołano doświadczenia amerykańskich koncernów naftowych sprzed około dwudziestu lat w zakresie zagospodarowania metanu, które wówczas nie zakończyły się sukcesem. Dlatego też niezbędne są kolejne badania i współpraca przedsiębiorstw, świata nauki i wsparcie ze strony państwa.
This paper provides an overview of national experiences in developing coal bed methane over the years 2002-2012, and analyses the development of its utilisation in the US and Australia. The choice of these countries was supported by their scale of methane production and the development of production dynamics, as well as Australia's plans to export methane through its liquefaction (LNG). The remaining countries producing methane from coal beds on an industrial scale are China, Canada, and India. This paper arranges by name and characterizes the features of several types of methane recovered from coal. It reviews coal bed methane resources in Poland and compares these to global resources. The paper also presents techniques of gas development as well as their technological advancements. Also analysed is the relationship between the total volume of methane and the level of hard coal production in Poland, in addition to the amount of methane consumption used to produce electricity and heat. The mining firm JSW has the most experience in utilising methane for energy production. Other mining companies are also presented with details on their experience in the commercial development of methane (KW and KHW). Advances in coal bed methane utilisation have been estimated according to the support system introduced by the Act of January 8, 2010 on amending the Energy Law and on amending certain other acts. The summary considers the experiences of US oil companies over the past twenty years in terms of methane extraction which proved unsuccessful. It is therefore necessary to carry out further research and develop cooperation between companies and the scientific world, as well as to receive government support.
Źródło:
Polityka Energetyczna; 2013, 16, 4; 189-200
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The study on combustion of propellants in airborne conditions
Badania temperatury spalania paliw prochowych w warunkach napowietrznych
Autorzy:
Habera, Ł.
Hebda, K.
Koślik, P.
Powiązania:
https://bibliotekanauki.pl/articles/1835266.pdf
Data publikacji:
2018
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
gas fracturing
combustion temperature of propellants
coal bed methane (CBM)
szczelinowanie gazowe
temperatura spalania propelantów
metan z pokładów węgla (CBM)
Opis:
The resources of coal-bed methane in Poland, and especially in Upper-Silesian Coal Basin are estimated on tens of billions cubic meters. These are significant raw material quantities, that should take an interest in terms of acquiring them and producing in safe manner. Considering, however, very low permeability of coal-bed formations, such accumulation of hydrocarbons can be counted among unconventional deposits, requiring specific first working method. Well-known and properly mastered method of influencing the gas-rich coal-bed, consisting in reducing formation pressure by rock-mass stress relieving, effected by means of dewatering of coal beds, gives only moderate production and economical results. Despite the rock-mass pressure decreasing down to sorption isotherm value will result in process of releasing adsorbed methane, the negligible permeability of coal rock forces searching of additional, more effective methods of coal beds stimulation, facilitating flow of released methane through the formation. In opinion of the work authors, application of gas-fracturing technology using low combustion temperature propellants may contribute to effective releasing of methane and flow of the gas to producing boreholes.
Zasoby metanu zalegającego w pokładach węgla kamiennego w Polsce, zwłaszcza w Górnośląskim Zagłębiu Węglowym, szacowane są na dziesiątki miliardów metrów sześciennych. Są to znaczne ilości surowca, którymi należy się zainteresować w kontekście pozyskania i ich bezpiecznej eksploatacji. Jednak z uwagi na bardzo niską przepuszczalność formacji węglowej taką akumulację węglowodorów możemy nazwać złożem niekonwencjonalnym, wymagającym szczególnego sposobu udostępnienia. Rozpowszechniona i dobrze opanowana metoda oddziaływania na gazonośny pokład węgla, polegająca na obniżeniu ciśnienia w złożu przez odprężenie górotworu, powodowane odwodnieniem pokładów węgla, przynosi umiarkowane rezultaty eksploatacyjne i ekonomiczne. Jakkolwiek obniżenie ciśnienia w górotworze do wartości izotermy sorpcji powoduje proces uwolnienia zaabsorbowanego metanu, to jednak znikoma przepuszczalność skały węglowej wymusza poszukiwanie dodatkowych, bardziej efektywnych metod stymulacji pokładów węgla umożliwiających przepływ uwolnionego metanu w złożu. Zdaniem autorów zastosowanie technologii szczelinowania gazowego z zastosowaniem propelantów o niskiej temperaturze spalania może przyczynić się do skutecznego uwolnienia metanu i przepływu gazu do otworów eksploatacyjnych.
Źródło:
Nafta-Gaz; 2018, 74, 8; 592-597
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utilization of the methane from Polish mines
Rozwój utylizacji metanu z polskich kopalń
Autorzy:
Nawrat, S.
Napieraj, S.
Powiązania:
https://bibliotekanauki.pl/articles/348615.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
metan
odmetanowanie
silniki gazowe
utylizacja metanu
zasoby metanu pokładów węgla
coal bed methane recourses
methane
drainage
gas engines
methane utilization
Opis:
In mines, methane is accompanying the hard coal exploitation. If not drained, methane is emitted to ventilation air forming methane-air mixtures of various methane concentration and then it is emitted to the atmosphere. Utilization of methane from coal beds is very important because of economic and ecological reasons. This paper presents the coal bed methane resources in Poland and the methods of its disposal.
W kopalniach metan, towarzyszący eksploatacji kopaliny podstawowej - węgla kamiennego, nie ujęty przez odmetanowanie w większej części wydziela się do powietrza wentylacyjnego tworząc mieszaniny metanowo-powietrzne o różnej koncentracji metanu i jest odprowadzany do atmosfery. Utylizacja metanu z pokładów węgla jest bardzo ważna z przyczyn gospodarczych i ekologicznych. w artykule przedstawiono zasoby metanu pokładów węgla w Polsce oraz stosowane metody jego utylizacji.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 269-282
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena oddziaływania propelantów na wybrane próbki węgla kamiennego
Assessing the impact of propellants on selected hard coal samples
Autorzy:
Hebda, Kamil
Habera, Łukasz
Frodyma, Antoni
Koślik, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1834976.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
metan z pokładów węgla kamiennego
szczelinowanie gazowe
propelanty
tomografia komputerowa
Coal Bed Methane
gas fracturing
propellants
X-ray computed tomography
Opis:
Artykuł powstał na podstawie wyników badań szczelinowania gazowego z wykorzystaniem materiałów wysokoenergetycznych (propelantów) na wybranych próbkach węgla kamiennego w laboratoryjnym silniku rakietowym (LSR). Celem badań było sprawdzenie, czy metoda stymulacji przepływu mediów ze złoża do odwiertu naftowego z użyciem propelantów może być skutecznie stosowana przy niekonwencjonalnych nagromadzeniach węglowodorów, jakimi są złoża metanu z pokładów węgla kamiennego (CBM). Szczelinowanie materiałami wysokoenergetycznymi polega na niedetonacyjnym wykonaniu kilku radialnych szczelin w strefie przyodwiertowej o długości do kilku metrów. Szczeliny powstają w wyniku spalania propelantów, które generują duże objętości gazów prochowych pod wysokim ciśnieniem, przez co zostaje przekroczone ciśnienie nadkładu skał w górotworze. Zakres badań obejmował serię prób szczelinowania gazowego wybranych próbek węgla kamiennego na poligonie doświadczalnym. Zabieg szczelinowania wykonano w laboratoryjnym silniku rakietowym, który standardowo służy do badania właściwości stałych paliw wysokoenergetycznych, jednak na potrzeby testów szczelinowania został odpowiednio zmodyfikowany. Próbki węgla wklejono za pomocą żywicy epoksydowej w specjalne stalowe obudowy, dzięki czemu produkty spalania propelantów mogły ingerować w strukturę węgla – szczelinując go. Do badań wykorzystano inhibitowane małogabarytowe paliwo wysokoenergetyczne (MPH) o zmiennej gramaturze. W celu określenia zmian w strukturze węgla próbki przeskanowano tomografem komputerowym przed i po próbach ciśnieniowych. Otrzymane tomogramy zrekonstruowano przy wykorzystaniu specjalistycznego oprogramowania komputerowego na obrazy 3D sieci spękań oraz ich procentową objętość w każdej z badanych próbek. Dodatkowo podczas prób poligonowych rejestrowane było ciśnienie maksymalne w komorze spalania w LSR. Badanie szczelinowania przeprowadzono dla 10 próbek węgla kamiennego, z czego udało się zeszczelinować 7 z nich. Przyrost szczelin w tych próbkach waha się od 9,3% do 332,5%. W przypadku 3 próbek zabieg szczelinowania skończył się niepowodzeniem.
The article is based on the results of gas fracturing with high-energy materials used for selected hard coal samples in a laboratory rocket motor (LRM). The purpose of the research was to check whether the method of stimulating the flow of media from the deposit to the oil well using propellants can be effectively used with unconventional hydrocarbon accumulations such as coalbed methane (CBM). Fracturing with high-energy materials consists in a non-detonative forming of several radial fractures in the near-well bore zone of lengths up to several meters. The fractures are formed as a result of the combustion of propellants which generate large volumes of combustion gases under high pressure, thus exceeding the pressure of overburden rocks. The scope of the research included a series of gas fracturing tests of selected hard coal samples on the testing ground. The carbon samples were glued with special epoxy resin into a special steel pipe, by which the propellant combustion products could affect the coal structure by fracturing. The fracturing treatment was performed in a laboratory rocket motor, which is a standard system for testing the properties of solid high-energy fuels; however, for the purpose of fracturing tests, it has been modified accordingly. The tests were performed with the application of inhibited small-dimension high-energy solid fuel (MPH) with variable weight. In order to determine changes in the coal structure, the samples were scanned with X-ray computed tomography, before and after tests on the testing ground. The obtained tomograms were reconstructed using specialized computer software for 3D images of the fractures system and their percentage volume in each of the coal samples. In addition, during the testing ground tests, the maximum pressure in the combustion chamber in LRM was recorded. The gas fracturing treatments were carried out for 10 hard coal samples, of which 7 were successfully fractured. The growth of fractures in these samples ranged from 9.3% to 332.5%. For 3 samples, the gas fracturing was unsuccessful.
Źródło:
Nafta-Gaz; 2019, 75, 12; 768-773
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania temperatury spalania propelantów w układach z przybitką cieczy
Testing the combustion temperature of propellants in arrangements with liquid tamping
Autorzy:
Habera, Łukasz
Frodyma, Antoni
Hebda, Kamil
Koślik, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1835092.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
szczelinowanie gazowe
paliwa prochowe
testy poligonowe
metan z pokładów węgla
gas-fracturing
powder fuels
fire-ground tests
coal-bed methane
Opis:
Celem pracy był bezpośredni pomiar temperatury spalania próbek paliw prochowych (propelantów) mogących znaleźć zastosowanie w pracach szczelinowania gazowego gazonośnych pokładów węgla kamiennego. Eksperymenty prowadzono na specjalnie zaprojektowanym strzałowym stanowisku badawczym. Zaproponowany układ pozwalał na wykonanie rejestracji ciśnień podczas spalania próbek paliw inicjowanych za pomocą zapłonników pirotechnicznych. Na podstawie uzyskanych charakterystyk zmian ciśnienia w czasie p(t) wyznaczone zostały podstawowe parametry użytkowe, tj. temperatura gazów prochowych i maksymalne ciśnienie. Testy polegały na zapłonie wyselekcjonowanych paliw wysokoenergetycznych w warunkach zawodnionych oraz na bezpośrednim pomiarze temperatury i ciśnienia spalania. Wykonano dziewięć pozytywnych prób spalania paliwa wysokoenergetycznego o różnej masie. Głównym wyzwaniem w pracy była próba odpowiedzenia na pytanie czy metoda stymulacji przypływu płynu do odwiertu dobrze sprawdzona w otworach ropnych i gazowych może znaleźć zastosowanie w pracach ułatwiających przepływ metanu w formacjach węglowych. Metoda oparta na szczelinowaniu gazowym z wykorzystaniem materiałów wysokoenergetycznych polega na niedetonacyjnym indukowaniu radialnej siatki szczelin w strefie przyotworowej. Zakres badań obejmuje dziewięć testów strzałowych na poligonie doświadczalnym realizowanych z użyciem różnych paliw prochowych spalanych w warunkach zawodnionych – z tzw. przybitką w postaci cieczy. Stalowe modele strzałowe zostały przygotowane tak, aby imitować warunki typowe dla tych, które dominują w stymulowanej warstwie węgla. Wstępne badania przeprowadzone w INiG – PIB wykazują, iż bezpośrednie przełożenie technologii szczelinowania z użyciem propelantów (znanej z przemysłu naftowego) na zabiegi szczelinowania pokładów węgla kamiennego wydaje się być niemożliwe. Adaptacji do warunków fizycznych zalegania węgla kamiennego wymaga przede wszystkim paliwo propelantowe. Głównym problemem postawionym w artykule jest wybór propelantu, którego temperatura spalania nie przekroczy 580°C, przy której następuje samozapłon metanu. Weryfikacja paliw prochowych (propelantów) mogą- cych znaleźć zastosowanie w procesie szczelinowania gazowego złóż niekonwencjonalnych, a zwłaszcza gazonośnych pokładów węgla będzie realizowana na drodze badań poligonowych z wykorzystaniem komory strzałowej.
The work was aimed at direct measurement of the combustion temperature of powder fuel samples (propellants) that may find application in gas-fracturing works in coal-bed methane strata. The experiments were performed on a purposefully designed blasting test stand. The proposed arrangement enabled recording pressures created during the combustion of propellant samples, ignited by means of pyrotechnic igniters. On the grounds of the obtained pressure change characteristics in time p(t), the basic operating parameters were determined, i.e. the temperature of propellant-generated gases and the maximum pressure. The tests consisted in igniting selected high-energy fuels in water-flooded conditions and in direct temperature and combustion pressure measurements. Nine successful tests of high-energy fuel combustion, featuring various masses, were performed. The goal of the study was to answer the question whether the method which stimulates medium influx to the borehole, well-known for applications in the oil sector, can be applied in coal bed stimulation. The method, based on gas fracturing with the use of high-energy materials, consists in making non-detonation cracking of the rock bed in the shape of several radial fractures in the zone near the borehole. The scope of the study comprises test shots in the testing ground using selected propellant charges. The steel-pipe models were prepared so as to imitate the conditions typical of those dominating in the borehole, and methodology was developed for appropriate evaluation of the test results. Initial studies carried out in Oil and Gas Institute – National Research Institute have proved that direct transformation of fracturing technology with propellants known from the oil industry into coal seams appears to be impossible. First and foremost, the propellant fuel itself requires adaptation to physical conditions of coal deposition. The main issue in the work is selection of the propellant, the combustion temperature of which would not exceed 580°C, at which self-ignition of methane occurs. Verification of powder fuels (propellants) that may find use in gas-fracturing process of unconventional resources, particularly coal-bed methane strata, will be executed by means of fire-ground tests with use of a blasting chamber.
Źródło:
Nafta-Gaz; 2019, 75, 9; 556-560
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Desk study into stress condition of bottom layer of thick coal bed
Teoretyczne rozważania nad stanem naprężeń w dolnej warstwie grubego pokładu
Autorzy:
Sidorenko, S. A.
Sidorenko, A. A.
Trushko, O. V.
Powiązania:
https://bibliotekanauki.pl/articles/349298.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
gruby pokład węgla
stan naprężenia
stan odkształcenia
eksploatacja dolnej warstwy pokładu węgla
strain state
stress state
trick coal bed
bottom coal seam layer exploitation
Opis:
The examined problem is to assess the stress and strain state of the bottom layers in thick regular coal seams. Design diagrams are offered that allow assessment of the impact of primary mining of the 1st layer on the state of the 2nd layer under various geotechnical conditions. A concerns both zones of the active support pressure, the previously mined areas, completely mined sites and zones bordering on the undisturbed coal massif. Regularities are established in changes in the stress state of the bottom layer at the edges of the coal massif and the pillars between the longwall faces. Conclusions are made on the rational location of mining workings at the lower horizons. A significant influence of the neighboring worked out sections is shown on the state of mining workings at the lower horizons.
Analizowanym zagadnieniem było określenie stanu naprężenia i odkształcenia w dolnej warstwie grubego, poziomo zalegającego pokładu węgla. Opracowane w tym celu diagramy pozwalają oszacować wpływ eksploatacji pierwszej warstwy węgla na stan drugiej, w przypadku występowania różnych warunków geotechnicznych. Dotyczy to zarówno stref oddziaływania obudowy, stref wcześniej eksploatowanych, zawałowych oraz stref graniczących nienaruszoną warstwą węgla. Ustalono pewne regularności w zmianach stanu naprężenia w narożach dowolnej warstwy węgla oraz w filarach pomiędzy polami ścianowymi. Wnioski dotyczą prawidłowej lokalizacji wyrobisk w dolnej części grubego pokładu węgla. Pokazano istotny wpływ wybieranych w sąsiedztwie części pokładu na stan wyrobisk znajdujących się w dolnej jego części.
Źródło:
Górnictwo i Geoinżynieria; 2010, 34, 2; 569-572
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Czy markery magnetyczne mogą być przydatne do przedeksploatacyjnego odmetanowania złóż węgla kamiennego – wybrane wnioski z badań nad łupkami gazonośnymi
Domagnetic markers could be useful for pre-operation demethanization of hard coal deposits – selected conclusions from studies on gas-bearing shales
Autorzy:
Zawadzki, J.
Bogacki, J.
Powiązania:
https://bibliotekanauki.pl/articles/113107.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
metan z pokładów węgla kamiennego
odmetanowanie
proppanty magnetyczne
technologie górnicze
szczelinowanie hydrauliczne
coal-bed methane
demethanization
magnetic proppants
mining technologies
hydraulic fracturing
Opis:
W pracy przedyskutowano możliwości zastosowania markerów magnetycznych do przedeksploatacyjnego odmetanowania złóż węgla kamiennego. W dyskusji tej wykorzysta-no wcześniejsze doświadczenia autorów związane z wytwarzaniem markerów magnetycznych przeznaczonych do wydobycia gazu łupkowego metodą szczelinowania hydraulicznego. Materiały magnetyczne mogą być dodawane do płynu szczelinującego w celu lepszego oszacowania zasięgu i skuteczności szczelinowania hydraulicznego. Zastosowanie właściwego markera może spowodować znaczący wzrost skuteczności szczelinowania i wydobycia metanu związanego w pokładach węgla kamiennego. Skuteczniej przeprowadzone szczelinowanie powinno z kolei w istotny sposób zmniejszyć zagrożenie metanowe występujące podczas wydobycia węgla kamiennego. Potencjalne proppanty do szczelinowania złóż węgla kamiennego mogą charakteryzować się znacznie mniejszymi wymaganiami, w porównaniu do proppantów stosowanych przy eksploatacji gazu łupkowego, co w konsekwencji może spowodować znacznie większą opłacalność ich stosowania oraz mieć decydujący wpływ na wybór technologii ich wytwarzania. Zagadnienia te wymagają jednak dalszych szczegółowych badań.
The paper discusses the possibilities of using magnetic markers for pre-operation demethanization of hard coal deposits based on the knowledge and experience of the authors, related to fabrication of magnetic markers for shale gas exploitation by means of hydraulic fracturing and literature review. Magnetic materials may be added to the fracturing fluid, as the magnetic marker allowing to better determine the range and efficiency of hydraulic fracturing. The application of appropriate magnetic markers can significantly improve the efficiency of coal-bed methane gas extraction. Thus, effective coal-bed methane fracturing should also significantly reduce the methane hazard occurring during hard coal mining. Selected properties of potential magnetic materials for pre-operation demethanization of hard coal deposits were discussed in the work. Potential proppants for hard coal deposits fracturing can be characterized by much smaller requirements in comparison to proppants used for shale gas extraction which, as a consequence, may result in much higher cost-effectiveness of their use and have a decisive influence on the choice of their production technology. However, these issues require further detailed research.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2018, 7, 1; 40-51
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena potencjału zasobowego CBM (coal bed methane) oraz możliwości występowania akumulacji gazu ziemnego typu tight w formacjach piaskowcowo-mułowcowych GZW
Assessment of the unitary resource potential of coal bed methane and the possibilities of tight gas accumulations occurrence, in sandstone-mudstone formations of the Upper Silesian Coal Basin
Autorzy:
Słoczyński, T.
Drozd, A.
Sowiżdżał, K.
Powiązania:
https://bibliotekanauki.pl/articles/1835305.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
potencjał zasobowy
formacja mułowcowo-piaszczysta
niecka GZW
złoże niekonwencjonalne
system naftowy
resource potential of coal bed methane
Upper Silesian Coal Basin
unconventional tight reservoirs
petroleum systems
Opis:
W artykule przedstawiono wyniki obliczeń jednostkowego potencjału zasobowego metanu w pokładach węgla kamiennego niecki GZW (coalbed methane) oraz ocenę możliwości występowania akumulacji gazu ziemnego typu tight w formacjach mułowcowopiaszczystych zalegających pomiędzy pokładami węgla. Zadanie zrealizowano, wykorzystując metodę dynamicznego przestrzennego modelowania 4D systemów naftowych przy użyciu oprogramowania PetroMod firmy Schlumberger. Modelowaniu poddano fragment karbońskiego wypełnienia niecki GZW o wymiarach 2,5 2,5 km, zlokalizowanego w jej południowo-zachodniej części. W ramach realizacji pracy skonstruowano przestrzenny dynamiczny model karbońskiego systemu naftowego, który był symulowany przy założeniach różnych scenariuszy ewolucji basenu sedymentacyjnego. Do budowy i kalibracji modeli wykorzystano dane dostępne w materiałach publikowanych, dane otworowe oraz wyniki badań laboratoryjnych próbek utworów karbońskich z odwiertów Jastrzębie-7b i Jastrzębie-8b, a także węgli kamiennych z KWK Zofiówka. W wyniku przeprowadzonych prac oszacowano jednostkowy potencjał zasobowy metanu w pokładach węgla kamiennego niecki GZW, wykazano zależność jego wielkości od typów węgli oraz przebiegu ewolucji basenu sedymentacyjnego niecki, a także oceniono możliwości występowania niekonwencjonalnych akumulacji typu tight w formacjach mułowcowo-piaszczystych.
The article presents the results of the unitary resource potential assessment of coal bed methane of the Upper Silesian Coal Basin (Coal Bed Methane) and an evaluation of the possibility of natural gas occurrences in tight, sandy mudstone formations interbedding coal seams. The task was carried out using the method of 4D dynamic petroleum systems modeling using the PetroMod software. Modeling tasks were carried for Carboniferous strata in the south-western part of the Upper Silesian Coal Basin, in the area of the Zofiówka coal mine. A spatial dynamic model (4D) of the Carboniferous petroleum system was developed, which was subsequently simulated assuming different scenarios for the evolution of the sedimentary basin. For model construction and calibration purposes, several data sources were used: well data of Jastrzębie-7B and Jastrzębie-8B wells, results of laboratory measurements of coal and rock samples from Zofiówka coal mine as well as published data. As a result, unitary estimation of the resource potential of coal bed methane of the Upper Silesian Coal Basin was presented, as well as its dependence upon the geological conditions of coal seams burial depths. The possibilities of the occurrence of unconventional accumulation of tight gas in sandy mudstone formations interbedding coal seams, were also indicated.
Źródło:
Nafta-Gaz; 2017, 73, 10; 739-749
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kriging blokowy oraz metody GIS w geostatystycznym szacowaniu metanonośności w kopalniach węgla kamiennego
Block kriging and GIS methods in geostatistical modeling of methane gas content in coal mines
Autorzy:
Badura, H.
Zawadzki, J.
Fabijańczyk, P.
Powiązania:
https://bibliotekanauki.pl/articles/346615.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Informacji Przestrzennej
Tematy:
GIS
metody geostatystyczne
metanonośność
kriging blokowy
zagrożenie metanowe w kopalniach
górnictwo węgla
geostatistical methods
coal bed methane content
block kriging
methane threat in mines
coal mining
Opis:
W pracy przedstawione zostały możliwości wykorzystania technik GIS w wyznaczaniu średniej metanonośności pokładu węglowego z uwzględnieniem aspektów przestrzennych badanego zjawiska. Dotyczyło to zarówno uwzględnienia przestrzennej lokalizacji wykonanego pomiaru metanonośności jak i wykorzystania metod geostatystycznych do estymacji wartości metanonośności wraz z uwzględnieniem błędu estymacji. Rozkłady przestrzenne metanonośności wyznaczone metodą krigingu blokowego umożliwiły określenie estymacji przedziałowej zawartości metanonośności w badanej ścianie. Błędy estymacji wyznaczone zostały na podstawie wariancji krigingu, która uwzględnia zarówno sumaryczny wpływ błędów wynikających ze specyficznego ułożenia punktów pomiarowych jak i błędów pomiarowych. W pracy wykorzystane zostało oprogramowanie SGeMS (ang. Stanford Geostatistical Modeling Software), które powstało na uniwersytecie Stanford. Oprogramowanie to umożliwia wykonywanie obliczeń geostatystycznych także w przestrzeni 3D, co jest istotne w badaniu zjawisk związanych z górnictwem, ze względu na bardzo istotne znaczenie wszystkich trzech współrzędnych układu kartezjańskiego. Dodatkowo, wykorzystanie informacji o pomiarach metanonośności wraz z pełną informacją o ich położeniu (3D) umożliwia badanie zmienności przestrzennej w układzie 3D i późniejsze wykorzystanie tej informacji w modelowaniu metanonośności. Metodyka ta umożliwia pełniejsze wykorzystanie informacji przestrzennej w porównaniu do sytuacji, w której wykorzystuje się tylko układ dwuwymiarowy.
This paper presents the possibilities of using GIS techniques in determining average methane content of coal longwall with regard to spatial aspects of investigated phenomenon. This takes into account spatial location of the performed measurement and use of geostatistical methods to estimate the value of the coal bed methane with regard to estimation error. Spatial distributions of coal bed methane estimated by block kriging allowed to determine interval estimation of coal bed methane in the longwall. Estimation errors have been determined on the basis of the kriging variance, which takes into account both the total impact of errors arising from the specific distribution of measurement points and measurement errors. The SGeMS (Stanford Geostatistical Modeling Software) software was used developed at the Stanford University. This software makes it possible to perform geostatistical calculations also in 3D space, which is important in the study of phenomena related to mining, because of the importance of all three coordinates of the Cartesian system. In addition, the use of information about methane measurements, together with full information on their position (3D) allows the study of spatial variation in 3D and the subsequent use of that information in modeling. This methodology allows exploiting full spatial information as compared to two-dimensional situations.
Źródło:
Roczniki Geomatyki; 2012, 10, 3; 17-26
1731-5522
2449-8963
Pojawia się w:
Roczniki Geomatyki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza skuteczności wprowadzonego systemu wsparcia wytwarzania energii elektrycznej z metanu
Analysis of the effectiveness of implemented systems of support for generating electricity from methane
Autorzy:
Kaliski, M.
Wojciechowski, R.
Szurlej, A.
Powiązania:
https://bibliotekanauki.pl/articles/282376.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
metan z pokładów węgla
zasoby metanu
system wsparcia
gospodarcze wykorzystanie metanu z kopalń
coal bed methane
methane resources
system of support
commercial utilization of methane
Opis:
W artykule dokonano przeglądu zasobów metanu z kopalń w Polsce oraz sposobów zagospodarowania tego gazu. Scharakteryzowano system wsparcia oraz przedstawiono podstawowe informacje o jego funkcjonowaniu w latach 2010-2011 r. Dokonana została uproszczona analiza ekonomiczna działającego systemu oraz przedstawiono rekomendacje. Ustawą z dnia 8 stycznia 2010 r. o zmianie ustawy - Prawo energetyczne oraz o zmianie niektórych innych ustaw wprowadzono system wsparcia w postaci świadectw pochodzenia energii elektrycznej wytworzonej w wysokosprawnej kogeneracji w jednostce opalanej metanem uwalnianym i ujmowanym przy dołowych robotach górniczych w czynnych, likwidowanych lub zlikwidowanych kopalniach węgla kamiennego. Istniejące obecnie w Polsce mechanizmy wsparcia dla produkcji energii elektrycznej z metanu, pochodzącego z kopalń węgla kamiennego są niewystarczające. Stworzony w 2010 r. system wsparcia w postaci świadectw oraz udzielanie pomocy publicznej przeznaczonej na inwestycje budowy nowych lub przystosowania istniej?cych instalacji energetycznych do wykorzystywania metanu pochodz?cego z odmetanowania kopalń węgla kamiennego nie zachęcają do zwiększenia gospodarczego wykorzystania metanu. W wyniku przeprowadzonej analizy wynika, iż należałoby: oprzeć system wsparcia na zasadach takich, jak dla systemu wsparcia odnawialnych źródeł energii (OZE), bez konieczności produkcji energii w kogeneracji, zwiększyć wartość opłaty zastępczej stosowanej w obecnym systemie wsparcia, stworzyć system wsparcia dla utylizacji i zagospodarowania metanu wentylacyjnego. Stosowane aktualnie technologie odmetanowania powodują, że metan uwalniany w trakcie robót górniczych jest w około 30% ujmowany odmetanowaniem, a w 70% usuwany na drodze wentylacyjnej. Możliwe jest zwiększenie poziomu odmetanowania z zastosowaniem obecnych technologii wydobycia węgla, czyli uj?cie 60% metanu i wyemitowanie do atmosfery 40%. Po wprowadzeniu zmian w systemie wsparcia obserwowany będzie znacz?cy efekt ekologiczny związany z zagospodarowaniem metanu.
This paper presents a review of coal mine methane resources in Poland and methods of their utilization. It characterizes the support system and presents principle information concerning the system’s functioning in the years 2010–2011. Basic economic analysis of existing systems was performed, and recommendations are presented. Based on the law dated January 8th 2010 – Energy law and changes of selected other acts certain support system based on the certificates of electrical energy origin generated in the highly efficient cogeneration in the unit fired with methane released and captured during underground mining works in operating, under liquidation or already closed hard coal mines was introduced. The mechanisms to support the production of electrical energy from coal mine methane already existing in Poland are not sufficient. The support system created in 2010 using certificates and public support meant for the construction of new, or adjustments to existing, energy installations to utilize methane coming from the drainage systems of hard coal mines fail to encourage increasing economical utilization of coal mine methane. The conclusions from the above analysis suggest that it is recommendable to: have existing support systems rely on the same rules as for the system of renewable sources of energy, without the necessity to produce energy in cogeneration, increase the supplementary fee used in the present support system, create a support system for the capturing and utilization of ventilation air methane. The technologies presently used to drain coal mine methane released during mining exploitation enable the capture of only 30% of the gas. The remaining 70% is released into the atmosphere. It is possible to increase the efficiency of methane drainage up to as much as 60% when implementing the latest drainage technologies mitigating methane emissions down to 40%. The introduction of the suggested changes in the support system should result in a significant ecological effect from coal mine methane’s economical utilization.
Źródło:
Polityka Energetyczna; 2012, 15, 4; 57-69
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bilans zasobów niekonwencjonalnych (i innych) złóż gazu w Polsce
Assessment of unconventional gas resources in Poland
Autorzy:
Wójcicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/2075324.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
niekonwencjonalne zasoby gazu
gaz zamknięty
gaz łupkowy
metan pokładów węgla
gaz z dużych głębokości
unconventional gas resources
tight gas
shale gas
coal bed methane
deep gas
Opis:
The paper summarizes information on gas resources in Poland, especially unconventionals. There are proven, though not very large, resources of conventional hydrocarbons and coalbed methane – the inventory is carried out by Polish Geological Survey. Recently undiscovered shale gas and tight gas resources have been assessed by Polish Geological Survey and other organizations. In previous decade undiscovered coal bed methane resources have been estimated as well. There were a number of studies on undiscovered conventional gas resources carried out in previous decades providing ever higher estimations of the undiscovered gas potential. These studies were also targeted on an intermediate category of gas resources – deep gas and/or tight gas resources in conventional traps. Putting all together, it seems the undiscovered potential of gas resources (both unconventional and conventional) in Poland is a quite impressive and various types of hydrocarbon resources coexist in respective hydrocarbon basins.
Źródło:
Przegląd Geologiczny; 2015, 63, 10/3; 1215--1219
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon Shale Combustion in the Fluidized Bed Reactor
Autorzy:
Olek, M.
Kandefer, S.
Kaniowski, W.
Żukowski, W.
Baron, J.
Powiązania:
https://bibliotekanauki.pl/articles/779262.pdf
Data publikacji:
2014
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
shale coal
combustion
fluidized bed technology
Opis:
The purpose of this article is to present the possibilities of coal shale combustion in furnaces with bubbling fluidized bed. Coal shale can be autothermally combusted in the fluidized bed, despite the low calorie value and high ash content of fuel. Established concentrations of CO (500 ppm) and VOC (30 mg/m3) have indicated a high conversion degree of combustible material during combustion process. Average concentrations of SO2 and NOx in the flue gas were higher than this received from the combustion of high quality hard coal, 600 ppm and 500 ppm, respectively. Optional reduction of SO2 and NOx emission may require the installation of flue gas desulphurization and de-NOx systems.
Źródło:
Polish Journal of Chemical Technology; 2014, 16, 2; 74-76
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of circulating fluidized bed gasification for characteristic study of pakistani coal
Autorzy:
Ramzan, N.
Athar, M.
Begum, S.
Ahmad, S. W.
Naveed, S.
Powiązania:
https://bibliotekanauki.pl/articles/779604.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
ASPEN PLUS
circulating fluidized bed
coal
gasification
simulation
Opis:
A process model for turbulent pressurized circulating fluidized-bed coal gasifier is created using ASPEN PLUS software. Both hydrodynamic and reaction kinetics parameter are taken into account, whose expressions for fluidized bed are adopted from the literature. Various reactor models available in ASPEN PLUS with calculator as External Block are nested to solve hydrodynamics and kinetics. Multiple operational parameters for a pilot-plant circulating fluidized-bed coal gasifier are used to demonstrate the effects on coal gasification characteristics. This paper presents detailed information regarding the simulation model, including robust analysis of the effect of stoichiometric ratio, steam to coal ratio, gasification temperature and gasification agent temperature. It is observed that, with the increase in the flow rate of air, the components hydrogen, carbon monoxide, carbon dioxide and methane reduce, which causes the Lower Heating Value (LHV) of synthesis gas (Syn. Gas) to decrease by about 29.3%, while increment in the steam flow rate shows a minute increase in heating value of only 0.8%. Stoichiometric ratio has a direct relationship to carbon conversion efficiency and carbon dioxide production. Increasing the steam to coal ratio boosts the production of hydrogen and carbon monoxide, and causes a drop in both carbon dioxide concentration and the conversion efficiency of carbon. High gasifying agent temperature is desired because of high concentration of CO and H2 &ensp, increasing carbon conversion and LHV. A high gasifying agent temperature is the major factor that affects the coal gasification to enhance H2 &enspand CO production rapidly along with other gasification characteristics.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 1; 66-78
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fluidization characteristics and separation performance of mild-hot gas-solid fluidized bed
Autorzy:
Lv, Bo
Luo, Zhenfu
Zhang, Bo
Zhao, Yuemin
Qin, Yunfei
Powiązania:
https://bibliotekanauki.pl/articles/109724.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dry coal separation
mild-hot gas-solid fluidized bed
bed temperature
fluidization characteristics
Opis:
In recent years, the mild-hot gas-solid fluidized bed had a crucial influence on wet-in-feed sorting when it comes to moist feed (e.g., lignite) because of its expanding sorting range. To explain the favorable sorting effect of the mild-hot gas-solid fluidized bed, the fluidization characteristics (e.g., the pressure drop, density, etc.) was studied under different work conditions. In addition, a high-speed dynamic camera was used in this study to compare the slumping behavior of the magnetite slag at different temperatures. The optimum conditions for coal separation was also studied by Design-Expert software. It was shown that the bed temperature of the fluidized bed has a particular effect on its stability when the bed temperature was below 120 °C, which had a great influence on the separation. Finally, the probable deviation E of the mild-hot gas-solid fluidized bed under optimum operation conditions could be as low as 0.09 g/cm3 which showed the good separation ability.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 1; 184-195
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of calcination temperature on activation behaviors of coal-series kaolin by fluidized bed calcination
Autorzy:
Yuan, S.
Han, Y.
Li, Y.
Gao, P.
Yu, J.
Powiązania:
https://bibliotekanauki.pl/articles/109800.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal-series kaolin
fluidized bed calcination
calcination temperature
activation behaviors
Opis:
This paper is aimed at investigating activation behaviors for coal-series kaolin using fluidized bed calcination as a novel method. The properties of calcined products at different temperature by fluidized bed calcination were evaluated by determination of weight loss rate, whiteness, chemical oxygen demand (COD), aluminum dissolution degree. The thermal behaviors and reaction mechanism were characterized by thermo gravimetric-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), particle size distribution (PSD) and scanning electron microscopy (SEM). The results showed that calcination temperature was essential factor determining the properties and crystallinity of calcined products using fluidized bed calcination. Coal-series kaolin transformed into irregular and amorphous metakaolin with excellent properties as calcined at 600-900 °C, which attributed to the dehydroxylation of kaolinite and combustion of carbon/organic matter. Calcined kaolin eliminated activity ascribed to the recrystallization into mullite when calcination temperature was over 1000 °C. It was believed that fluidized bed calcination was an efficient thermal activation technology for coal-series kaolin and the calcination temperature should be controlled accurately.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 590-600
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and experiments using a spiral-liquid-solid fluidized bed system
Autorzy:
Sha, J.
Liang, L.
Liu, B.
Xie, G.
Peng, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110520.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
liquid-solid fluidized bed
spiral unit
coal separation
water quantity
Opis:
Liquid-solid fluidized bed (LSFB) has been widely known and used for separation of coarse coal particles (normally larger than 0.25 mm). The process of separation by LSFB needs fluidization water from the bottom to the top of LSFB. The fluidization water is formed by the water addition at the bottom of the LSFB. Normally the quantity of water addition is very large, which increases the burden of water treatment in coal preparation processes. In this investigation, a spiral unit was introduced into the conventional LSFB and the new separation equipment was named S-LSFB. The spiral unit could provide an upward force for the upward movement of coarse low density coals into the concentrate, and hence the quantity of water addition for fluidization water may be reduced. Samples of 0.5-0.25 mm size fraction coal were used to investigate the difference in separation performance between S-LSFB and LSFB. It was found that the separation performance of S-LSFB was nearly equal to that of LSFB. S-LSFB may be beneficial to coarse coal separation in coal preparation plant since the burden of water treatment can be reduced by the application of S-LSFB.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 427-434
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dry beneficiation and cleaning of chinese high-ash coarse coal utilizing a dense-medium gas-solid fluidized bed separator
Autorzy:
He, J.
Tan, M.
Zhu, R.
Luo, Z.
Powiązania:
https://bibliotekanauki.pl/articles/110808.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal cleaning
dense-medium fluidized bed
density distribution
segregation
separation performance
Opis:
Dry dense-medium fluidized bed separation provides a new alternative approach for coal beneficiation and cleaning. An indicator of segregation degree Sash was proposed to evaluate the stratified performance of coal samples by bed density. Fluidization stability of the bed was greatly enhanced by mixing a certain amount (21.53%) of fine magnetite powder (< 0.15 mm) into the fluidized media, which indicated a uniform density distribution as well as slight fluctuations in bed. It was found that the favorable density-segregation performance of 3–13 mm coarse coal occurred with a static bed height of 80 mm and a superficial gas velocity of 11.84 cm/s. The optimal segregation degree values of 0.67, 0.74 and 0.76 were obtained for 3–6, 6–10 and 10–13 mm coal samples, respectively. Low-ash clean coal with yields of 50.79, 56.83 and 61.24% were effectively acquired by the dry separation for various coal size fractions, respectively. Probable error values of 0.07, 0.055 and 0.05 g/cm3 were achieved, indicating good separation performance.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 662-675
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Investigation on Hydrodynamic Combustion and NO_x Emission Behavior in 8 MW Circulating Fluidized Bed
Autorzy:
İpek, O.
Gürel, B.
Kan, M.
Powiązania:
https://bibliotekanauki.pl/articles/1031746.pdf
Data publikacji:
2017-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
circulating fluidized bed
hydrodynamic analysis
multi-phase flow
NO_x emissions
clean coal
Opis:
Multi-phase flow is one of the types of flow which is frequently observed in natural phenomena and engineering applications. Circulating fluidized beds constitute an important application of multi-phase flow. The combustion and emission behaviours in circulating fluidized beds are determined by hydrodynamic of bearing. The most appropriate combustion can be provided with the hydrodynamic structure of bearing, taking into account fuel and operating parameters. Therefore, the hydrodynamic structure of circulating fluidized beds should be displayed with mathematical/physical modelling and simulation approach for its analysis and synthesis. Mathematical analysis in today's conditions is very difficult or impossible because of excessive turbulence, unstable and two-phase flow characteristics of the bed. Therefore, the most effective way to do this is the use the physical modelling and simulation approach. In this study, 8 MW circulating fluidized bed hydrodynamic analysis are made by ANSYS-FLUENT R14 commercial CFD code and then combustion and emissions analysis are made with hydrodynamic analysis results. These analysis results show that combustion chamber exit mean NO_x emission was 38.5 ppm and combustion chamber exit mean temperature was 1123 K.
Źródło:
Acta Physica Polonica A; 2017, 132, 3; 553-557
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research on energy-size distribution model of coal particle bed comminution
Autorzy:
Zhou, Qiang
Guo, Qing
Pan, Yongtai
Zhu, Changyong
Wei, Yinghua
Powiązania:
https://bibliotekanauki.pl/articles/1845226.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal
particle bed comminution
extended G-S distribution
JK size-dependent breakage model
mathematical modelling
Opis:
In order to accurately predict the particle size distribution (PSD) of coal particle bed comminution under different applied pressures, the tests of two kinds of coal with four size fractions under five different applied pressures were carried out by TAW-3000 hydraulic servo testing machine. The Gaudin-Schumann(G-S) distribution is extended by the fractal theory and the JK size-dependent breakage model is discussed. Two mathematical models for predicting PSD of crushing products in coal particle bed comminution are proposed. Results show that the relationship between the mass-specific energy and applied pressure is linear. Because of the protective effect of fine particles, the change of particle size modulus d0 in G-S distribution is not significant, while the distribution parameter α decreases logarithmically with the increase of mass-specific energy. With the decrease of size fraction, the crushability of coal particle bed decreases, and a master curve can be used to fit the comminution characteristics of coal particle bed with different size fractions. The extended G-S distribution model and the JK size-dependent breakage model have better fit the results of coal particle bed comminution. This research provides a useful reference for the mathematical modelling of coal particle bed comminution.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 772-783
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on coal-water fuel combustion in a circulating fluidized bed
Badanie spalania zawiesinowych paliw węglowo-wodnych w cyrkulacyjnej warstwie fluidalnej
Autorzy:
Kijo-Kleczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/963876.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
paliwa węglowo-wodne
muł węglowy
biomasa
spalanie w cyrkulacyjnej warstwie fluidalnej
coal-water fuels
coal-mule
biomass
combustion in circulating fluidized bed
Opis:
In the paper the problem of heavily-watered fuel combustion has been undertaken as the requirements of qualitative coals combusted in power stations have been growing. Coal mines that want to fulfill expectations of power engineers have been forced to extend and modernize the coal enrichment plants. This causes growing quantity of waste materials that arise during the process of wet coal enrichment containing smaller and smaller under-grains. In this situation the idea of combustion of transported waste materials, for example in a hydraulic way to the nearby power stations appears attractive because of a possible elimination of the necessary deep dehydration and drying as well as because of elimination of the finest coal fraction loss arising during discharging of silted water from coal wet cleaning plants. The paper presents experimental research results, analyzing the process of combustion of coal-water suspension depending on the process conditions. Combustion of coal-water suspensions in fluidized beds meets very well the difficult conditions, which should be obtained to use the examined fuel efficiently and ecologically. The suitable construction of the research stand enables recognition of the mechanism of coal-water suspension contact with the inert material, that affects the fluidized bed. The form of this contact determines conditions of heat and mass exchange, which influence the course of a combustion process. The specificity of coal-water fuel combustion in a fluidized bed changes mechanism and kinetics of the process.
W pracy omówiono problematykę spalania wysoko zawodnionych paliw, która nabiera coraz większego znaczenia w miarę wzrostu wymagań jakościowych węgli spalanych w elektrowniach. Kopalnie węgla kamiennego, chcąc spełnić oczekiwania energetyków, zmuszone zostały do rozbudowy i unowocześnienia zakładów wzbogacania węgla. Powoduje to wzrost ilości odpadów powstających w procesie mokrego wzbogacania zawierających coraz mniejsze podziarna. W tej sytuacji koncepcja bezpośredniego spalania wspomnianych odpadów, transportowanych np. hydraulicznie do pobliskich elektrowni wydaje się atrakcyjna, zarówno ze względu na możliwość eliminacji konieczności głębokiego odwadniania i suszenia, a także likwidacji strat najdrobniejszych frakcji węgla, przy zrzucie zamulonych wód z zakładów wzbogacania. W pracy zaprezentowano wyniki badań eksperymentalnych, analizujących proces spalania zawiesiny w zależności od warunków prowadzenia procesu. Spalanie zawiesin w-w w warstwie fluidalnej bardzo dobrze spełnia trudne warunki, jakie należy uzyskać, aby sprawnie i ekologicznie wykorzystać rozpatrywane paliwo. Odpowiednia konstrukcja stanowiska badawczego umożliwiła rozpoznanie mechanizmu kontaktu zawiesin w-w z materiałem inertnym, stanowiącym warstwę fluidalną. Od formy tego kontaktu zależą bowiem warunki wymiany ciepła i masy, które decydują o przebiegu procesu spalania. Jak wykazano, specyfika spalania zawiesin w-w w warstwie fluidalnej zmienia mechanizm i kinetykę procesu.
Źródło:
Archives of Mining Sciences; 2012, 57, 1; 79-92
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of feed control on the coal bed stability in a jig
Wpływ regulacji nadawy na stabilność złoża wzbogacanego węgla w osadzarce
Autorzy:
Cierpisz, Stanisław
Joostberens, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/220290.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wzbogacanie węgla
sterowanie osadzarki
regulacja nadawy
stabilizacja łoża
coal separation
jig control
feed control
bed stabilization
Opis:
The paper presents a simulation analysis of four control systems of the raw coal feed to a jig: stabilization of the volumetric flow of the feed, stabilization of the feed tonnage, stabilization of the feed flow with the additional measurement of the feed bulk density or the additional measurement of ash content in the feed. Analysis has been performed for the first and second compartments of a jig. The aim of the feed control was to stabilize the mass of the bed in the zone where the material stratifies; the mass may change due to changes in the washability characteristics of the feed. Such control should result in stable conditions in which material loosens during subsequent media pulsation cycles; stabilizing conditions minimizes the dispersion of coal particles in the bed. The best results have been achieved for the system of feed control where the ash content was measured in the first compartment, and for feed tonnage control in the second compartment.
Przedstawiono symulacyjną analizę czterech układów stabilizacji nadawy węgla surowego do osadzarki: stabilizację przepływu objętościowego nadawy, natężenia przepływu masowego, przepływu z dodatkowym pomiarem gęstości nasypowej oraz z pomiarem zawartości popiołu w nadawie. Analizę przeprowadzono dla pierwszego i drugiego przedziału osadzarki. Celem układów regulacji nadawy była stabilizacja masy materiału w strefie rozdziału osadzarki, która może zmieniać się na skutek zmian charakterystyki wzbogacalności węgla surowego. Układy stabilizacji nadawy powinny stabilizować warunki rozluzowania węgla w kolejnych cyklach pulsacji minimalizując rozproszenie ziaren węgla w łożu osadzarki. Najlepsze wyniki uzyskano dla układu stabilizacji nadawy z pomiarem zawartości popiołu (dla pierwszego przedziału osadzarki) oraz dla układu stabilizacji przepływu masowego dla drugiego przedziału osadzarki.
Źródło:
Archives of Mining Sciences; 2019, 64, 4; 639-653
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Modified Gibbs Free Energy Minimisation Model for Fluid Bed Coal Gasification
Autorzy:
Ściążko, M.
Stępień, L.
Powiązania:
https://bibliotekanauki.pl/articles/185298.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
equilibrium modelling
coal gasification
gasification modelling
fluid bed gasification
modelowanie równowagi
zgazowanie węgla
modelowanie gazyfikacji
gazyfikacja
Opis:
A modified approach to equilibrium modelling of coal gasification is presented, based on global thermodynamic analysis of both homogeneous and heterogeneous reactions occurring during a gasification process conducted in a circulating fluid bed reactor. The model is based on large-scale experiments (ca. 200 kg/h) with air used as a gasification agent and introduces empirical modifications governing the quasi-equilibrium state of two reactions: water-gas shift and Boudouard reaction. The model predicts the formation of the eight key gaseous species: CO, CO2, H2O, H2, H2S, N2, COS and CH4, volatile hydrocarbons represented by propane and benzene, tar represented by naphthalene, and char containing the five elements C, H, O, N, S and inorganic matter.
Źródło:
Chemical and Process Engineering; 2015, 36, 1; 73-87
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody badania reaktywności węgla w procesach spalania i zgazowania
Methods of coal reactivity determination in combustion and gasification processes
Autorzy:
Smoliński, A.
Howaniec, N.
Stańczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/340242.pdf
Data publikacji:
2006
Wydawca:
Główny Instytut Górnictwa
Tematy:
węgiel kamienny
reaktywność węgla
spalanie węgla
zgazowanie węgla
analizator termograwimetryczny
reaktor DTR
reaktor ze złożem stałym
reaktor ze złożem fluidalnym
bomba kalorymetryczna
reaktor WRB
reaktor HRR
hard coal
coal reactivity
combustion of coal
coal combustion
coal gasification
thermogravimetric analyzer
Field's Drop Tube Reactor
Fixed Bed Reactor
fluidized bed reactor
Calorimetric Bomb
Wire Mesh Reactor
Hot Rod Reactor
Opis:
Światowa produkcja energii elektrycznej bazuje na zastosowaniu paliw stałych, płynnych i gazowych. W Polsce, zajmującej czołowe miejsce pod względem produkcji węgla kamiennego w Europie, 65% zapotrzebowania energetycznego zaspokajane jest z wykorzystaniem tego właśnie surowca. Węgiel kamienny poddawany jest przeróbce głównie w procesach spalania i zgazowania. Na całym świecie nieustannie dąży się do udoskonalania technologii wytwarzania energii elektrycznej przez poprawę sprawności instalacji przemysłowych, przy jednoczesnym uwzględnieniu aspektów środowiskowych, takich jak na przykład redukcja zanieczyszczeń powietrza w wyniku minimalizacji emisji gazów cieplarnianych, powstających w procesie spalania. Głównym produktem procesu zgazowania węgla jest gaz syntezowy, znajdujący wiele zastosowań przemysłowych, zwłaszcza w syntezie chemicznej (w ubiegłym stuleciu była to głównie synteza produktów chemicznych do wytwarzania paliw silnikowych). Zarówno w przypadku spalania, jak i zgazowania węgla, pierwszym etapem procesu jest, trwająca ułamki sekundy, piroliza, czyli proces termicznego rozkładu węgla, której produktami są średniokaloryczny gaz, ciekłe węglowodory oraz stała pozostałość - karbonizat. Jednym z parametrów charakteryzujących węgiel oraz powstający w wyniku jego pirolizy karbonizat, pod względem efektywności zastosowań w procesach przemysłowych, jest reaktywność. Określa ona zdolność węgla lub produktów jego przetwórstwa do przemian termochemicznych w procesach spalania bądź zgazowania i jest zależna od wielu czynników, między innymi od: zawartości części lotnych, popiołów, stopnia uwęglenia wyjściowego węgla oraz warunków przeobrażeń fizykochemicznych, jakim podlega węgiel podczas pirolizy. Brak jest obecnie znormalizowanych metod badania reaktywności węgla lub otrzymanych z niego karbonizatów z uwagi na różnorodność warunków prowadzenia procesów i stosowanych metod zgazowania i spalania węgla oraz brak prostej metodyki laboratoryjnej. W artykule, na podstawie danych literaturowych, opisano metody badania reaktywności węgli lub karbonizatów z zastosowaniem: analizatorów termograwimetrycznych (TGA), reaktorów DTR (Field's Drop Tube Reactor), reaktorów ze złożem stałym (Fixed Bed Reactor), reaktorów ze złożem fluidalnym (Fluidized Bed Reactor - FBR), bomb kalorymetrycznych, reaktorów WRB (Wire Mesh Reactor) oraz reaktorów HRR (Hot Rod Reactor), ze wskazaniem zalet i wad każdej z nich.
The world' s power production is based on solid, liquid and gaseous fuels. In Poland, being the leading European hard coal producer, 65% of energy needs depends on this solid fuel. Hard coal is processed mainly in combustion and gasification systems. The world's trend is the continuous upgrading of power production technologies by improvements in the effectiveness of the industrial systems, while taking into account the environmental aspects, like e.g. reduction of green house gases emission from combustion systems. The main product of gasification is synthesis gas, widely applied in industry, especially in industrial synthesis (during the last century mainly in the synthesis of chemical products for engine fuels production). The first stage of both: the gasification and combustion processes is pyrolysis - lasting fractions of a second process of thermal decomposition of coal, resulting in production of medium calorific gas, liquid hydrocarbons and solid residue - chars. One of the parameters describing coal and its chars in terms of their effectiveness in industrial processes is their reactivity. The reactivity determines an ability of coal and coal processing products to undergo thermochemical transformations in combustion and gasification processes and depends on many factors, like chemical composition of coal and chars: content of volatiles, ashes and carbon, as well as the terms under which the physical and chemical changes during pyrolysis take place. The reactivity is not tested on a standardized basis, mainly because of the wide variety of reaction terms and methods of combustion and gasification used and lack of simple laboratory testing method. In the paper, short characteristics of reactors depicted in the literature as used in reactivity testing, such as: thermogravimetric analyzers (TGA), Field's Drop Tube Reactors (DTR), Fixed Bed Reactors, Fluidized Bed Reactors (FBR), Calorimetric Bombs, Wire Mesh Reactors (WMR) and Hot Rod Reactors (HRR) are presented.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2006, 4; 77-92
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Petrographic composition of coal from the Janina mine and char obtained as a result of gasification in the CFB gasifier
Skład petrograficzny węgla z kopalni Janina i karbonizatu uzyskanego w wyniku jego zgazowania z cyrkulacyjnym złożem fluidalnym
Autorzy:
Bielowicz, Barbara
Powiązania:
https://bibliotekanauki.pl/articles/216340.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
coal gasification
char petrography
fluidized bed gasification
char classification
zgazowanie węgla
petrografia karbonizatu
reaktor fluidalny
klasyfikacja karbonizatu
Opis:
The research was aimed at examining the impact of the petrographic composition of coal from the Janina mine on the gasification process and petrographic composition of the resulting char. The coal was subjected to fluidized bed gasification at a temperature below 1000°C in oxygen and CO2 atmosphere. The rank of coal is borderline subbituminous to bituminous coal. The petrographic composition is as follows: macerals from the vitrinite (61.0% vol.); liptinite (4.8% vol.) and inertinite groups (29.0% vol.). The petrofactor in coal from the Janina deposit is 6.9. The high content of macerals of the inertinite group, which can be considered inert during the gasification, naturally affects the process. The content of non-reactive macerals is around 27% vol. The petrographic analysis of char was carried out based on the classification of International Committee for Coal and Organic Petrology. Both inertoid (34.7% vol.) and crassinetwork (25.1% vol.) have a dominant share in chars resulting from the above-mentioned process. In addition, the examined char contained 3.1% vol. of mineroids and 4.3% vol. of fusinoids and solids. The calculated aromaticity factor increases from 0.75 in coal to 0.98 in char. The carbon conversion is 30.3%. Approximately 40% vol. of the low porosity components in the residues after the gasification process indicate a low degree of carbon conversion. The ash content in coal amounted to 13.8% and increased to 24.10% in char. Based on the petrographic composition of the starting coal and the degree of conversion of macerals in the char, it can be stated that the coal from the Janina deposit is moderately suitable for the gasification process.
Celem badań była analiza wpływu składu petrograficznego węgla z kopalni Janina na proces zgazowania i skład petrograficzny powstałego karbonizatu. Węgiel poddano zgazowaniu w reaktorze fluidalnym w temperaturze poniżej 1000°C oraz w atmosferze tlenu i CO2. Stopień uwęglenia wyjściowego węgla to granica między węglem brunatnym twardym błyszczącym a węglem kamiennym. Skład petrograficzny przedstawia się następująco: dominują macerały z grupy witrynitu (61,0% obj.); a z grupy liptynitu i inertynitu stanowią odpowiednio o 4,8% obj. i 29,0% obj. Petrofactor w węglu ze złoża Janina wynosi 6,9. Wysoka zawartość macerałów z grupy inertynitu, którą można uznać za obojętną podczas zgazowania, ma naturalny wpływ na proces. Zawartość niereaktywnych macerałów wynosi około 27% obj. Analiza petrograficzna karbonizatu została przeprowadzona w oparciu o klasyfikację International Committee for Coal and Organic Petrology. Składniki inertoid (34,7% obj.) i crassinetwork (25,1% obj.) mają dominujący udział w karbonizacie powstałym w procesie zgazowania. Ponadto badany węgiel zawierał 3,1% obj. mineroidów i 4,3% obj. fusinoidów i solid. Obliczony współczynnik aromatyczności wzrasta z 0,75 w węglu do 0,98 na karbonizacie. Konwersja węgla wynosi 30,3%. W karbonizacie znajduje się około 40% obj. składników o niskiej porowatości, co wskazuje na niski stopień konwersji węgla. Zawartość popiołu w węglu wynosiła 13,8% i wzrosła do 24,10% w karbonizacie. Na podstawie składu petrograficznego wyjściowego węgla i stopnia konwersji macerałów w karbonizacie można stwierdzić, że węgiel ze złoża Janina jest umiarkowanie odpowiedni do procesu zgazowania.
Źródło:
Gospodarka Surowcami Mineralnymi; 2019, 35, 1; 99-116
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Petrographic composition of char from the gasification of coal from the Wieczorek Mine after combustion
Skład petrograficzny karbonizatu ze zgazowania węgla z kopalni Wieczorek i popiołów po jego spaleniu
Autorzy:
Maciejończyk, Natalia
Bielowicz, Barbara
Powiązania:
https://bibliotekanauki.pl/articles/216716.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
coal gasification
char petrography
fluidized bed gasification
bottom ash
fly ash
fluidized bed combustion
zgazowanie węgla
petrografia karbonizatu
reaktor fluidalny
popiół denny
popiół lotny
złoże fluidalne
Opis:
The aim of the paper is the petrographic characterization of coal from the Wieczorek mine and the residues after its gasification. The coal was subjected to gasification in a fluidized bed reactor at a temperature of about 900°C and in an atmosphere of oxygen and CO2. The petrographic, proximate, and ultimate analysis of coal and char was performed. The petrographic composition of bituminous coal is dominated by macerals of the vitrinite group (55% by volume); macerals of inertinite and liptinite groups account for 23% and 16.0%, respectively. In the examined char, the dominant component is inertoid (41% vol.). Mixed dense and mixed porous account for 10.9% and 13.5% vol., respectively. In addition, the examined char also contained unreacted particles such as fusinoids, solids (11.3% vol.), and mineroids (5.1% vol.). The char contains around 65% vol. of low porosity components, which indicates a low degree of carbon conversion and is associated with a low gasification temperature. The char was burned and the resulting bottom and fly ashes were subjected to petrographic analysis. Their composition was compared with the composition of ashes from the combustion of bituminous coal from the Wieczorek mine. Bottom ashes resulting from the combustion of bituminous coal and char did not differ significantly in the petrographic composition. The dominant component was mineroid, which accounted for over 80% vol. When it comes to fly ash, a larger amount of particles with high porosity is observed in fly ash from bituminous coal combustion.
Celem postawionym w poniższej pracy była charakterystyka petrograficzna węgla z kopalni Wieczorek oraz pozostałości po jego zgazowaniu. Węgiel poddano zgazowaniu w reaktorze fluidalnym w temperaturze około 900°C oraz w atmosferze tlenu i CO2. Wykonano analizy petrograficzne, technologiczne i chemiczne węgla i karbonizatu. W składzie petrograficznym badanego węgla kamiennego przeważały macerały z grupy witrynitu (55% obj.), z kolei macerały z grupy inertynitu i liptynitu stanowiły odpowiednio 23 i 16,0% obj. W badanym karbonizacie dominującym składnikiem był inertoid (41% obj.). Składniki zaliczane do typów mixed dense i mixed porous stanowiły odpowiednio 10,9 i 13,5% obj. Ponadto, badany karbonizat zawierał cząstki nieprzereagowane, takie jak fusinoid i solid (11,3% obj.) oraz mineroid (5,1% obj.). W karbonizacie znajdowało się około 65% obj. składników o niskiej porowatości, co wskazuje na niski stopień konwersji węgla i jest związane z niską temperaturą zgazowania. Następnie karbonizat poddano spalaniu, a powstałe popioły denne i lotne były przedmiotem badań petrograficznych. Porównano ich skład ze składem popiołów ze spalania węgla kamiennego z kopalni Wieczorek. Popioły denne ze spalania karbonizatu i węgla kamiennego nie różniły się znacząco pod względem składu petrograficznego. Ich dominującym składnikiem był mineroid, który stanowił ponad 80% obj. W przypadku popiołów lotnych, większa liczba cząstek o dużej porowatości była obserwowana w popiołach pochodzących ze spalania węgla kamiennego.
Źródło:
Gospodarka Surowcami Mineralnymi; 2019, 35, 2; 69-86
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental investigation into coal-biomass-water fuels combustion in a circulating fluidized bed
Badania eksperymentalne spalania paliw węglowo-biomasowo-wodnych w cyrkulacyjnej warstwie fluidalnej
Autorzy:
Kijo-Kleczkowska, A.
Kosowska-Golachowska, M.
Luckos, A.
Środa, K.
Powiązania:
https://bibliotekanauki.pl/articles/357468.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska
Tematy:
coal-biomass-water fuels
fuels combustion
circulating fluidized bed
paliwa węglowo-biomasowo-wodne
spalanie paliw
cyrkulacyjna warstwa fluidalna
Opis:
Coal upgrading processes (screening, washing etc.) generate large quantities of fine and ultra-fine coal particles usually in the form of coal-water slurries. Utilization of these waste-coals is a preferable option to their disposal and offers opportunities for adding value. Direct combustion of coal slurries can eliminate troublesome dewatering and drying processes. Combustion or co-combustion of coal slurries with other fuels (higher quality coal, biomass) in circulating fluidized-bed (CFB) boilers is the best option for their utilization. High combustion efficiencies can be achieved provided that the combustion process is properly designed to take into account the unique properties of the fuel. Because biomass is considered as a carbon-neutral fuel, co-combustion of coal slurries with biomass can lower the CO2 footprint and decrease the cost of electricity. This paper describes the results of experiments carried out in a laboratory-scale CFB combustor with coal-biomass-water fuels. It has been found that the combustion time and ignition temperature decrease with an increase in the biomass content in the fuel and the superficial gas velocity.
Niekorzystny bilans paliwowy naszego kraju powoduje nadmierne obciążenie środowiska, wywołane emisją NOx, SO2, CO2 i pyłów, a także powiększeniem powierzchni koniecznych na składowanie narastających stałych odpadów paleniskowych. Górnictwo, zmuszane dostarczać energetyce coraz lepsze paliwo, musi stosować głębsze wzbogacanie węgla. Powoduje to ciągły wzrost odpadów w postaci mułów poflotacyjnych. Najlepszą metodą utylizacji tych mułów jest ich spalanie w postaci zawiesin oraz współspalanie z innymi paliwami, prowadzone przede wszystkim w kotłach fluidyzacyjnych. Z drugiej strony, rozwój technologii wykorzystania biomasy na cele energetyczne daje szereg przyszłościowych korzyści. Biomasa jest jednym z najbardziej obiecujących źródeł energii odnawialnej w Polsce, a jej współspalanie z węglem znajduje w ostatnich latach coraz szersze zastosowanie, zarówno w Polsce, jak i na świecie. Praca podejmuje wyniki badań eksperymentalnych współspalania węgla z biomasą w postaci zawiesin w warunkach cyrkulacyjnej warstwy fluidalnej. Stwierdzono m.in. skrócenie czasu spalania paliwa oraz obniżenie temperatury jego zapłonu za pośrednictwem części lotnych, w miarę wzrostu zawartości biomasy w zawiesinie.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2014, 16, 2; 85-92
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CO2 capture and storage (CCS) by means of coal combustion products of fluidised-bed boilers
Pozyskiwanie i przechowywanie CO2 (CCS) przy użyciu produktów spalania węgla w kotle ze złożem fluidalnym
Autorzy:
Buryan, P.
Donat, P.
Buryan, S.
Powiązania:
https://bibliotekanauki.pl/articles/318743.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
kocioł ze złożem fluidalnym
dwutlenek węgla
przechowywanie
produkty spalania węgla
fluidized bed boilers
carbon dioxide
storage
coal combustion products
Opis:
Through a one-year monitoring of the coal combustion products (CCP) coming from the Tisová Power Plant, using lime for the desulphurisation of the combustion gases from fluidised-bed boilers burning lignite from Sokolovská uhelná, a.s., it was conclusively proved that these coal combustion products significantly absorb carbon dioxide from the atmosphere during free deposition. Nevertheless, this irreversible sorption of carbon dioxide is not included in monitoring plans for reporting CO2 emissions of any power plant, or in the plans for CO2 stratification.
Po roku obserwacji produktów spalania węgla pochodzącego z elektrowni Tisová, używając wapna do odsiarczania gazów spalania lignitu, w kotle ze złożem fluidalnym, który pochodził z Sokolovskáuhelná, a.s., ostatecznie udowodniono, że te produkty spalania węgla znacząco wchłaniają dwutlenek węgla z atmosfery w trakcie swobodnego osadzania. Niemniej jednak, ta nieodwracalna sorpcja dwutlenku węgla nie została zawarta w planach obserwacyjnych zawiadamiania o poziomie emisji CO2 w żadnej z elektrowni, lub w planach stratyfikacji CO2.
Źródło:
Inżynieria Mineralna; 2015, R. 16, nr 1, 1; 93-96
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary studies of content of unburned carbon in fly ash from coal-fired fluidized bed combustion
Analiza zawartości niespalonego węgla w popiołach z palenisk fluidalnych
Autorzy:
Styszko-Grochowiak, K.
Witkowska, U.
Gołaś, J.
Powiązania:
https://bibliotekanauki.pl/articles/385368.pdf
Data publikacji:
2007
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
niespalony węgiel
analiza niespalonego węgla w popiele
spalanie fluidalne
unburned carbon
carbon analysis in coal fly ash
fluidized bed combustion
Opis:
The application of "gradual roasting" test for the measurements of unburned carbon content in fluidized bed combustion (FBC) fly ashes was described. In "gradual roasting" method sample is heating in muffle furnace in three stages. Unburned carbon content in fly ash was determined by using thermogravimetry analysis (TGA-DTA). Thermogravimetric method was applied to assess of "gradual roasting" test. The error S% due to the presence of interferences in matrix of fly ashes from fluidized bed combustion was determined. Correlation between "gradual roasting" test and thermogravimetry analysis of the unburned carbon content of FBC fly ash was discussed.
Celem artykułu była ocena możliwości zastosowania metody stopniowanego prażenia do oznaczania zawartości niespalonego węgla w popiołach fluidalnych. Opracowana metoda polega na prażeniu próbki popiołu w piecu laboratoryjnym w trzech etapach. Metodę termograwimetryczną i różnicową analizę termiczną zastosowano dla oceny wyników otrzymanych metodą stopniowanego prażenia. Metoda krzywych DTA-TG dostarcza informacji dotyczących przemian związanych ze zmianą masy badanej substancji (ubytek lub przyrost) oraz w jakich zakresach temperatur mają miejsce te zmiany. Dlatego metoda ta posłużyła do wyznaczenia charakterystycznych temperatur utleniania węgla i rozkładu węglanów, a także temperatury odparowania całkowitego wody z próbki popiołu. Obecność w matrycy popiołu z palenisk fluidalnych interferentów powoduje, że wyniki otrzymane przy zastosowaniu standardowej metody oznaczania części palnych są zawyżone i obciążone systematycznym błędem S%.
Źródło:
Geomatics and Environmental Engineering; 2007, 1, 2; 89-96
1898-1135
Pojawia się w:
Geomatics and Environmental Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of coal with coal-mule and biomass co-combustion in slurry form
Analiza współspalania węgla z mułem węglowym i biomasą w postaci zawiesiny
Autorzy:
Kijo-Kleczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/220182.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanizm i kinetyka reakcji spalania
współspalanie węgla z mułem węglowym i biomasą
warstwa fluidalna
mechanism and kinetics of combustion reaction
co-combustion of coal with coal-mule and biomass
fluidized bed
Opis:
Combustion technology of coal-water fuels creates a number of new possibilities to organize the combustion process fulfilling contemporary requirements e. g in the environment protection. Therefore an in-depth analysis is necessary to examine the technical application of coal as energy fuel in the form of suspension. The paper undertakes the complex research of the coal with coal-mule and biomass co-combustion. The mathematical model enables the prognosis for change of the surface and the centre temperatures and a mass loss of the fuel during combustion in air and in the fluidized bed.
W pracy omówiono problematykę spalania wysoko zawodnionych paliw, która nabiera coraz większego znaczenia w miarę wzrostu wymagań jakościowych węgli spalanych w elektrowniach. Przeanalizowano spalanie mułów poflotacyjnych, a także zawodnionych paliw, będących mieszaniną pyłu węgla i biomasy oraz wody. Kopalnie węgla kamiennego, chcąc spełnić oczekiwania energetyków, zmuszone zostały do rozbudowy i unowocześnienia zakładów wzbogacania węgla. Powoduje to wzrost ilości odpadów, powstających w procesie mokrego wzbogacania, zawierających coraz mniejsze podziarna. W tej sytuacji koncepcja bezpośredniego spalania wspomnianych odpadów, transportowanych np. hydraulicznie do pobliskich elektrowni, wydaje się atrakcyjna zarówno ze względu na możliwość eliminacji konieczności głębokiego odwadniania i suszenia, jak i likwidacji strat najdrobniejszych frakcji węgla przy zrzucie zamulonych wód z zakładów wzbogacania. Opracowany model matematyczny zawiera równania uwzględniające całokształt zjawisk towarzyszących spalaniu zawiesiny w strumieniu powietrza i w warstwie fluidalnej oraz z dostateczną dokładnością opisuje wspomniane procesy, realizowane podczas badań.
Źródło:
Archives of Mining Sciences; 2014, 59, 2; 347-366
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Konwersja kotła pyłowego węglowego OB230p na kocioł fluidalny biomasowy BFB220 oraz przystosowanie turbiny TG5 do pracy w układzie kogeneracyjnym
Autorzy:
Roszak, Waldemar
Powiązania:
https://bibliotekanauki.pl/articles/2096859.pdf
Data publikacji:
2021
Wydawca:
Nowa Energia
Tematy:
technologie
kocioł pyłowy
kocioł węglowy
kocioł fluidalny
kocioł biomasy
układ kogeneracyjny
technologies
dust boiler
coal boiler
fluidized bed boiler
biomass boiler
cogeneration system
Opis:
ZE PAK S.A. w 2020 r. zlecił firmie Valmet Technologies realizację w formule „pod klucz” kontraktu na zaprojektowanie i wykonanie przebudowy kotła węglowego K-7 w Elektrowni Konin na kocioł fluidalny pracujący w technologii BFB. W ramach prac modernizacyjnych zlecono również firmie Etos Energy przystosowanie turbiny TG-5 (typu TK50) do pracy w kogeneracji. Kocioł K7 z turbogeneratorem TG5 i instalacjami pomocniczymi stanowi nowy blok nr 5.
Źródło:
Nowa Energia; 2022, 2; 56-60
1899-0886
Pojawia się w:
Nowa Energia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of cyclic combustion of the coal-water suspension
Autorzy:
Kijo-Kleczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/240737.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cykliczne spalanie
kinetyka reakcji spalania
mechanizm procesów spalania paliw
model matematyczny
paliwo zawiesinowe
suspensja węglowo-wodna
złoże fluidalne
coal-water suspension
cyclic combustion of suspension
fluidized bed
kinetics of combustion reaction
mathematical model of coal-water fuel cyclic combustion
mechanism of fuel combustion
Opis:
Combustion technology of the coal-water suspension creates a number of new possibilities to organize the combustion process fulfilling contemporary requirements, e.g. in the environment protection. Therefore the in-depth analysis is necessary to examine the technical application of coal as a fuel in the form of suspension. The research undertakes the complex investigations of the continuous coal-water suspension as well as cyclic combustion. The cyclic nature of fuel combustion results from the movement of the loose material in the flow contour of the circulating fluidized bed (CFB): combustion chamber, cyclone and downcomer. The experimental results proved that the cyclic change of oxygen concentration around fuel, led to the vital change of both combustion mechanisms and combustion kinetics. The mathematical model of the process of fuel combustion has been presented. Its original concept is based on the allowance for cyclic changes of concentrations of oxygen around the fuel. It enables the prognosis for change of the surface and the centre temperatures as well as mass loss of the fuel during combustion in air, in the fluidized bed and during the cyclic combustion.
Źródło:
Archives of Thermodynamics; 2011, 32, 1; 45-75
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-44 z 44

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies