Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "chemical process" wg kryterium: Temat


Tytuł:
Analysis and assessment of technological processes of the Miedwie Lake surface water treatment plant for the city of Szczecin
Analiza i ocena procesów technologicznych stacji uzdatniania wody powierzchniowej z jeziora Miedwie dla miasta Szczecina
Autorzy:
Wira, J.
Wira, D.
Powiązania:
https://bibliotekanauki.pl/articles/84845.pdf
Data publikacji:
2005
Wydawca:
Akademia Pomorska w Słupsku
Tematy:
technological process
Lake Miedwie
surface water
water treatment plant
Szczecin city
protection zone
lake water
tributary
raw water
clean water
water parameter
water analysis
water temperature
chloride
chemical oxygen demand
oxidizability
pH reaction
alkalinity
carbon dioxide
Opis:
Miedwie Lake is the biggest post-glacial lake of the West-Pomeranian Voievodship. At the same time it is the fifth of the largest lakes in Poland. As regards the geographical situation, Miedwie Lake is situated centrally between three big agglomerations i.e. Szczecin, Stargard Szczecinski and Pyrzyce (Fig. 1). The lake lies on the territory of three municipalities: Pyrzyce and Warnice in the District of Pyrzyce as well as Stargard Szczecinski in the District of Stargard (Rozmiarek 1983, Szyper 1990). At the moment, the reservoir is characterised with the regular, prolonged shape resembling an ellipse. Banks are shallow, regular and sometime very wet. The lake has the belt of the nearshore reaching locally tens metres far from the lake bank, what is the reason, together with the fact that the wind blows always here, that it is convenient for practising the various kinds of water sports. The lake area amounts to 3 527 ha; maximal depth – 43.8 m; average depth – 19.3 m; water capacity – 681.7 mln m3; shore-line length – 38.8 km; water level datum 14.1 m above sea level; maximal width 3.16 km; maximal length 16.2 km. The lake’s bottom is the lowest situated area on the territory of Poland.
Ujecie wody „Miedwie” powstało w roku 1976. Do tego czasu wody jeziora odpowiadały pierwszej klasie czystości. Jednakże jakość wody zaczęła się pogarszać już po rozpoczęciu eksploatacji ujęcia, dochodząc aż do poziomu trzeciej klasy czystości. Przyczyną był brak oczyszczalni oraz PGR-y. Zanieczyszczenie zbiornika powodowało masowe śniecią ryb (siei miedwiańskiej), przy dnie pojawił się siarkowodór, masowo zakwitały glony. Dalsze pogarszanie się stanu jeziora groziło zamknięciem ujęcia wody oraz wyniszczeniem życia biologicznego w zbiorniku, jak również wokół niego. Spadek jakości wód jeziora spowodowany był kilkoma czynnikami: rolnictwo, baza rosyjska w Kluczewie, turystyka, dopływy jeziora, biomanipulacja wodami Miedwia.
Źródło:
Baltic Coastal Zone. Journal of Ecology and Protection of the Coastline; 2005, 09
1643-0115
Pojawia się w:
Baltic Coastal Zone. Journal of Ecology and Protection of the Coastline
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of chromatography to the analysis of quality of RME type biofuels obtained from pure, fresh rapeseed oil and from the waste (previously fried) oil of the same origin
Zastosowanie chromatografii do analizy jakosci biopaliw typu RME uzyskanych z oleju czystego oraz zuzytego
Autorzy:
Wcislo, G.
Strzelczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/793751.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
biodiesel fuel
biofuel
fatty acid methyl ester
rapeseed methyl ester
gas chromatography
diesel engine
thermal condition
physical property
chemical property
rapeseed oil
transesterification process
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Approaches to industrial risk assessment coupled with catastrophic natural phenomena
Autorzy:
Milazzo, M. F.
Powiązania:
https://bibliotekanauki.pl/articles/2069146.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
Na-Tech risk
quantitative risk assessment
industrial facilities
natural hazards
chemical process
industrial process
Opis:
The aim of this contribution is to focus attention on a new emerging risk known in the literature as Na-Tech risk (Natural-Technological risk). Na-Tech are technological accidents triggered by natural events, these are of particular interest for high risk industries. The magnitude of such an event is much broader than that related to a technological accident and its management is much more complex. Adequate preparedness, proper emergency planning and effective response are crucial for the prevention and mitigation of the consequences of Na-Techs This contribution gives a general overview of the methodologies, that are currently being developed, in order to integrate these types of scenarios into the conventional quantitative risk analysis for chemical and process industry.
Źródło:
Journal of Polish Safety and Reliability Association; 2013, 4, 2; 229--240
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania szybkości absorpcji CO2 w wodnych roztworach węglanów potasowych z dodatkiem 2-etyloaminoetanolu
Investigations of the rate of CO2 absorption into aqueous potash solutions with 2-ethylaminoethanol
Autorzy:
Moniuk, Wł.
Pohorecki, R.
Nosewicz, M.
Szczepańska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2071147.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ditlenek węgla
2-etyloaminoetanol
proces Benfield
absorpcja z reakcją chemiczną
współczynnik przyspieszania wnikania masy
carbon dioxide
2-ethylaminoethanol
BENFIELD process
absorption with chemical reaction
enhancement factor
Opis:
W pracy przedstawiono wpływ stężenia cząstek na częstość obrotów mieszadła niezbędną dla wytworzenia drobnoziarnistej zawiesiny całkowitej. Pompujące ku dołowi pojedyncze mieszadło z sześcioma pochylonymi łopatkami o stosunku średnicy zbiornika do średnicy mieszadła Did = 3 użyto do mieszania zawiesiny kredy. Pomiary przeprowadzono w zbiorniku cylindrycznym (średnica 200 i 300 mm) z przegrodami. Średnia średnica objętościowa cząstek wynosiła 4,6 μm, a ich stężenie zmieniano w granicach od 2,5 do40%obj.
The effect of particle concentration on impeller speed necessary for fine suspension mixing is presented in the paper. A single down pumping pitched six-blade impeller with the vessel to impeller diameter ratio Did = 3 was used for mixing of chalk suspension. Measurements were carried out in cylindrical baffled vessels with diameters of 200 and 300 mm. The mean volumetric diameter of particles was 4.6 μm and the mean volumetric concentration changed in the range from 2.5% to 40%.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 3; 75-76
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biological nutrient removal using a novel five-step continuous flow activated sludge process technology
Autorzy:
Abualhai, S.
Naseer, R.
Xiwu, L.
Powiązania:
https://bibliotekanauki.pl/articles/208183.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
nitrogen removal
activated sludge process
chemical oxygen demand
sewage
nutrient removal
biological processes
nutrient concentrations
usuwanie azotu
chemiczne zapotrzebowanie tlenu
ścieki
biologiczne usuwanie składników odżywczych
proces biologiczny
stężenie substancji odżywczych
metoda osadu czynnego
proces osadu czynnego
Opis:
An anaerobic-anoxic/oxic (AA/O) five-tank biological process called five-step continuous flow activated sludge process (FSCFASP) was developed to force the oscillation of organic matter and nutrient concentrations in process reactors. The run scheme and schematic diagram of FSCFASP was described. The run cycle was divided into two symmetrical half cycles with eight periods during each cycle. The duration of each period was established according to biological process requirements. The optimal running times of the periods were 90, 60, 60, 30, 90, 60,6 0 and 30 min at the HRT of 16 h, air/water ratio of 35% and SRT of 21 day at the temperature range of 19-23 °C. The optimized system achieved 88.09±1.43%, 90.33±2.9%, 68.83±5.34% and 87.67±2.9% of the chemical oxygen demand, NH4+-N, TN, and TP removal efficiencies, respectively, during a 11-month operation with the effluent meeting the Chinese sewage discharge standard GB18918-2002 (level A). Simultaneous nitrification and denitrification phenomena were observed in the tank one which is important to reduce the quantity of aeration and the duration of a next anoxic state. Compared with other existing technologies, this system achieved high nitrogen and phosphorus removal without equipment of sludge and mixed liquor return. Thus, it is effective for reducing energy consumption.
Źródło:
Environment Protection Engineering; 2013, 39, 3; 165-184
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Changes in cow’s milk composition and physical properties during the uninterrupted milking process
Zmiany w składzie mleka krowiego podczas nieprzerwanego doju
Autorzy:
Dymnicki, E.
Golebiewski, M.
Wojcik, A.
Puppel, K.
Kuczynska, B.
Sosin-Bzducha, E.
Szulc, T.
Powiązania:
https://bibliotekanauki.pl/articles/2620.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
cow milk
health status
milk composition
fat
chemical composition
physical property
milking process
Opis:
Changes in cow’s milk composition and physical properties during the uninterrupted milking process. The chemical composition of milk determines the nutritional value and technological properties of milk and dairy products. Many studies have been performed on the chemical composition of milk, including fatty acid and protein profile, however a limited number of investigations have determined the changes in chemical composition of the milk during the milking process. Experiment were designed to study changes in milk chemical composition (i.e. fat, protein, casein, lactose, urea, citric acid, Total Solids (TS), Solids-Non-Fat (SNF), free fatty acids (FFA) as well as acidity, density, freezing point and somatic cell score) during the uninterrupted milking. Fifty two (455 samples) cows of 3 different breeds; with daily production 5-12 kg; were sampled during interrupted milking process. Representative sample were collected from each kg of milked liquid. There were significant (P≤0.01) changes in fat, FFA, lactose, TS and density of milk during milking. The concentration of fat, FFA, and TS shown increasing tendency with the course of milking, however, lactose and density presented opposite trends. Therefore, obtaining the whole quantity of milk from udder during the milking process, beside shaping the health status, is an indispensable step to produce milk of the highest quality in terms of its nutritional and technological value.
Zmiany w składzie mleka krowiego podczas nieprzerwanego doju. Skład chemiczny mleka określa wartość odżywczą i właściwości technologiczne mleka i produktów mlecznych. Przeprowadzono wiele badań dotyczących składu chemicznego mleka, profilu kwasów tłuszczowych i zawartości białek. Jednak istnieje mało badań, które dotyczyłyby zmian w składzie chemicznym mleka w trakcie procesu dojenia. Celem badań było określenie zmian w składzie chemicznym mleka (czyli tłuszcz, białko, kazeina, laktoza, mocznik, kwas cytrynowy, sucha masa (s.m.), sucha masa beztłuszczowa (s.m.b.), wolnych kwasów tłuszczowych (FFA) oraz kwasowość, gęstość, punkt krzepnięcia i liczba komórek somatycznych) podczas nieprzerwanego doju. Badania przeprowadzono na 52 krowach (3 różnych ras) o średniej dziennej produkcji mleka 5-12 kg. Ogółem pobrano 455 próbek mleka. Reprezentatywne próbki pobierano z każdego kolejnego udojonego kilograma mleka. Stwierdzono istotne (P≤0,01 ) zmiany w zawartości tłuszczu, FFA, laktozy, TS i gęstości mleka podczas dojenia. Koncentracja tłuszczu, FFA i TS wykazały tendencję wzrostową w trakcie dojenia, jednak laktoza i gęstość trend odwrotny. Dlatego pozyskanie całej ilości mleka z wymion podczas procesu dojenia, obok kształtowania stanu zdrowia, jest niezbędnym krokiem w kierunku produkcji mleka najwyższej jakości pod względem jego wartości odżywczej i technologicznej.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Animal Science; 2015, 54[1]
1898-8830
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Animal Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of two methods of soil organic carbon determination
Porównanie dwóch metod oznaczania węgla organicznego w glebach
Autorzy:
Barancikova, G.
Makovnikova, J.
Powiązania:
https://bibliotekanauki.pl/articles/905584.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
comparison
determination method
soil parameter
organic carbon
determination
biological process
chemical process
physical process
soil process
Opis:
Soil organic carbon (SOC) is one of the basic soil parameters which takes part in many biological, chemical and physical soil processes and the SOC is currently considered as a key indicator of soil quality. For this reason determination of the SOC is a part of soil complex monitoring which has been performed in Slovakia since 1993. From 1993 until 2007 the “wet” method of determination of the SOC was used. Since 2008 the “dry” method for determination of the SOC has been applied. The goal of this work has been to evaluate and compare two methods of the SOC determination; the “wet”(Ťiurin method in modification of Nikitin (TN)) and the “dry” determination of the SOC by means of the CN analyser (EA), which was performed on 95 soil samples of topsoil coming from 17 sampling sites with a wide range of the SOC (1–15%). Sampling sites include arable lands and grasslands and represent main soil types and subtypes of Slovakia. On the basis of statistical processing it has been found that in soils with the SOC content up to 3%, differences between two methods are minimal. However, in the case of a higher content of the SOC, the EA method reaches a higher value than the TN method. Obtained data shows that in the case of soil samples with a higher content of the SOC, when changing an analytical method, the PTF function that reduces differences and allows to use all time series monitoring data should be used for the purpose of the tracking trends of the SOC monitoring.
Celem pracy było porównanie wyników oznaczania węgla organicznego (SOC) w próbkach gleb dwoma metodami: spalania „na mokro“ (Tiurina) oraz spalania „na sucho“ w autoanalizatorzee CN. Analizowano 95 próbek gleb z 17 miejsc kompleksowego monitoringu gleb Słowacji, o zwawartości węgla organicznego od 1 do 15%. Analiza statystyczna wykazała, że różnice wyników oznaczania SOC dwoma metodami w próbkach o zawarości węgla do 3% nie były istotne statystycznie. Dla próbek o wyższej zawartości SOC, wyniki uzyskane metodą spalania „na sucho“ były istotnie wyższe niż uzyskane metodą Tiurina, dlatego do celów porównawczych zawartości SOC w tych glebach oznaczonych różnymi metodami należy stosować odpowiednie przeliczniki.
Źródło:
Polish Journal of Soil Science; 2015, 48, 1
0079-2985
Pojawia się w:
Polish Journal of Soil Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Complex Reagent Efficiency in Reduction of Copper from the Slags in Conditions of the Smelter & Refinery Plant - Głogów
Autorzy:
Wołczyński, W.
Migas, P.
Bydałek, A. W.
Najman, K.
Senderowski, C.
Kwapisiński, P.
Powiązania:
https://bibliotekanauki.pl/articles/382620.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solidification process
copper droplets
complex reagent
slag
thermo-chemical treatment
krzepnięcie
miedź
odczynniki
żużel
obróbka cieplno-chemiczna
Opis:
The copper droplets contained in the post-processing liquid slag are subjected to the treatment by the complex reagent. The complex reagent has been recently elaborated and patented in frame of the Grant No. PBS3/A5/45/2015. In particular, the complex reagent is dedicated to the post-processing slags coming from the Smelter and Refinery Plant, Głogów, as a product of the direct-to-blister technology performed in the flash furnace. The recently patented complex reagent effectively assists not only in agglomeration, and coagulation but also in the deposition of the copper droplets at the bottom of crucible / furnace as well. The treatment of the post-processing slags by the complex reagent was performed in the BOLMET S.A. Company as in the industrial conditions which were similar to those usually applied in the KGHM – Polish Copper (Smelter and Refinery Plant, Głogów). The competition between buoyancy force and gravity is studied from the viewpoint of the required deposition of coagulated copper droplets. The applied complex reagent improves sufficiently the surface free energy of the copper droplets. In the result, the mechanical equilibrium between coagulated copper droplets and surrounding liquid slag is properly modified. Finally, sufficiently large copper droplets are subjected to a settlement on the crucible / furnace bottom according to the requirements.
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 86-90
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer prediction of technological regimes of rapid cone-shaped adsorption filters with chemical regeneration of homogeneous porous loads
Komputerowe prognozowanie trybów technologicznych szybkich stożkowych filtrów adsorpcyjnych z chemiczną regeneracją jednorodnych porowatych obciążeń
Autorzy:
Bomba, Andrii
Klymyuk, Yurii
Prysiazhniuk, Ihor
Powiązania:
https://bibliotekanauki.pl/articles/1841354.pdf
Data publikacji:
2020
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
mathematical model
process of water purification
adsorption
rapid cone-shaped filter
chemical regeneration
homogeneous porous load
model matematyczny
proces oczyszczania wody
adsorpcja
szybki stożkowy filtr
regeneracja chemiczna
jednorodne porowate obciążenie
Opis:
Sformułowano matematycznemodele do prognozowania trybów technologicznych filtracji (oczyszczanie wody z obecnych zanieczyszczeń), płukania wstecznego, regeneracji chemicznej i bezpośredniego przemywania szybkich stożkowych adsorpcyjnych filtrów z uwzględnieniem wpływu temperatury na kinetykę wewnętrznego przenoszenia masy przy zachowaniu stałych prędkości odpowiednich trybów. Opracowano się algorytmy numerycznie asymptotycznych aproksymacji rozwiązań odpowiadających problemów nieliniowych pojedynczo zaburzonych brzegowych dla domeny modelu o kształcie stożka, ograniczonej dwiema powierzchniami ekwipotencjalnymi i powierzchnią przepływu.Proponowanemodelew kompleksie pozwalają na prowadzenie eksperymentów komputerowych w celu zbadania zmiany stężeń zanieczyszczeń w strumieniu filtracyjnym ina powierzchni adsorbentu obciążającego, temperatury przepływu filtracji, współczynnika filtracji oraz porowatości czynnej wzdłuż wysokości filtra ze względu na procesy adsorpcji i desorpcji, na ich podstawie przewidzieć bardziej optymalne zastosowania adsorbentów i wydłużenia czasu ochronnegoszybkich stożkowych filtrów adsorpcyjnych z chemiczną regeneracją jednorodnych porowatych obciążeń.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2020, 10, 4; 19-24
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer prediction of technological regimes of rapid cone-shaped adsorption filters with chemical regeneration of homogeneous porous loads
Komputerowe prognozowanie trybów technologicznych szybkich stożkowych filtrów adsorpcyjnych z chemiczną regeneracją jednorodnych porowatych obciążeń
Autorzy:
Bomba, Andrii
Klymyuk, Yurii
Prysiazhniuk, Ihor
Powiązania:
https://bibliotekanauki.pl/articles/1841367.pdf
Data publikacji:
2020
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
mathematical model
process of water purification
adsorption
rapid cone-shaped filter
chemical regeneration
homogeneous porous load
model matematyczny
proces oczyszczania wody
adsorpcja
szybki stożkowy filtr
regeneracja chemiczna
jednorodne porowate obciążenie
Opis:
Sformułowano matematycznemodele do prognozowania trybów technologicznych filtracji (oczyszczanie wody z obecnych zanieczyszczeń), płukania wstecznego, regeneracji chemicznej i bezpośredniego przemywania szybkich stożkowych adsorpcyjnych filtrów z uwzględnieniem wpływu temperatury na kinetykę wewnętrznego przenoszenia masy przy zachowaniu stałych prędkości odpowiednich trybów. Opracowano się algorytmy numerycznie asymptotycznych aproksymacji rozwiązań odpowiadających problemów nieliniowych pojedynczo zaburzonych brzegowych dla domeny modelu o kształcie stożka, ograniczonej dwiema powierzchniami ekwipotencjalnymi i powierzchnią przepływu.Proponowanemodelew kompleksie pozwalają na prowadzenie eksperymentów komputerowych w celu zbadania zmiany stężeń zanieczyszczeń w strumieniu filtracyjnym ina powierzchni adsorbentu obciążającego, temperatury przepływu filtracji, współczynnika filtracji oraz porowatości czynnej wzdłuż wysokości filtra ze względu na procesy adsorpcji i desorpcji, na ich podstawie przewidzieć bardziej optymalne zastosowania adsorbentów i wydłużenia czasu ochronnegoszybkich stożkowych filtrów adsorpcyjnych z chemiczną regeneracją jednorodnych porowatych obciążeń.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2020, 10, 4; 19-24
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Consequences of maritime critical infrastructure accidents with chemical releases
Autorzy:
Bogalecka, M.
Powiązania:
https://bibliotekanauki.pl/articles/117563.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
critical infrastructure
maritime critical infrastructure
critical infrastructure accident
critical infrastructure accident losses
critical infrastructure accident consequences
maritime transport critical Infrastructure
semi-markov process
chemical releases
Opis:
The probabilistic general model of critical infrastructure accident consequences including three models of the process of the initiating events generated by a critical infrastructure accident, the process of the environment threats and the process of environment degradation is created and adopted to the maritime transport critical infrastructure understood as a ship network operating at the sea waters and then applied to accident consequences modeling, identification and to these consequences optimization and mitigation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 4; 771-779
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design Of the Tension Mechanism Of a Knotter And Optimization Of the Motion Parameters
Autorzy:
Lan, Jiahao
Feng, Pei
Zhang, Junping
Zhang, Ronggen
Yang, Chongchang
Powiązania:
https://bibliotekanauki.pl/articles/2200745.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
chemical fiber
filament knotting process
knotter
catenary
knotting rate
Opis:
Currently, the knotting of chemical fiber filament packages in factories primarily comprises manual operations. It also has a high labor intensity and is subject to artificial subjective factors, due to which it is difficult to guarantee the quality of the finished fiber products. Furthermore, it also significantly restricts the intelligent construction of chemical fiber production. This work employs partially oriented yarn (POY) and full draw yarn (FDY) to develop an automatic knotting device. The catenary theory was used to confirm the state of the yarn and to determine the relevant parameters of the tension mechanism. The results showed that the developed automatic knotting device satisfactorily meets the conditions required for manual knotting. The curve equation that was calculated using the catenary conformations of the yarn state verified that the actual yarn state was consistent with the theory. Moreover, the work provides a theoretical foundation for subsequent mechanism optimizations.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 6 (151); 12--18
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Developing the Physicochemical Foundations to Form Heterogeneous Rocket Propellants Using the Loading Method
Opracowanie podstaw fizykochemicznych formowania heterogenicznych paliw rakietowych metodą zasypową
Autorzy:
Gańczyk-Specjalska, K.
Powiązania:
https://bibliotekanauki.pl/articles/403428.pdf
Data publikacji:
2017
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
chemical technology
fuel formation process
heterogeneous propellants
cross-linking
loading method
technologia chemiczna
formowanie paliw
paliwa heterogeniczne
sieciowanie
metoda zasypowa
Opis:
The physicochemical foundations are being developed to form propellants using the loading method. The advantages of this method include the possibility of achieving a greater packing density of the particulates, no requirement for the use of costly equipment, and the absence of mechanical operations that could pose a risk of fire or explosion. The determined values were dimensions, helium and bulk density, closed pore content, (the content of intergranular spacing and open pore), and the thermal stability of ammonium perchlorate (AP) granules originating from various sources. The obtained materials differed in terms of size, sphericity, bulk density, closed pore density, (the content of intergranular spacing and open pore). The granulate having the greatest sphericity and bulk density was determined based on tests. The measurements, sphericity and density of aluminium dust originating from various sources were established. The pot life of the prepolymer cross-linking agent (diisocyanate) system was specified. Cross-linking agents with a pot life exceeding 3 hours at a temperature of 70ºC were selected. Based on the tests, materials were selected for the formation of heterogeneous rocket propellants using the loading method. The propellant samples created using the loading method were characterised in terms of their physicochemical parameters.
Opracowano podstawy fizykochemiczne do formowania paliw metodą zasypową. Zaletami metody zasypowej jest możliwość uzyskania największej gęstości upakowania cząstek stałych, nie wymaga stosowania kosztownych urządzeń oraz nie przeprowadza się operacji mechanicznych, które stwarzają zagrożenie pożarowo-wybuchowe. Określono wymiary, gęstość helową i nasypową, zawartość porów zamkniętych oraz wolnych przestrzeni międzyziarnowych i porów otwartych, stabilność termiczną granulowanego chloranu(VII) amonu (AP) pochodzącego z różnych źródeł. Pozyskane materiały różniły się pod względem wymiarów, kulistości, gęstości nasypowej oraz zawartości porów zamkniętych oraz wolnych przestrzeni międzyziarnowych i porów otwartych. Na podstawie badań wytypowano granulat o największej kulistości i gęstości nasypowej. Przeprowadzono pomiary wymiarów, kulistości i gęstości dla pyłu aluminiowego pochodzącego z różnych źródeł. Określono czas życia technologicznego dla układów prepolimer+środek sieciujący (diizocyjanian). Wytypowano środki sieciujące, których czasy życia technologicznego wynosiły powyżej 3,0 h w temperaturze 70ºC. Na podstawie przeprowadzonych badań wytypowano materiały, które stosowano w formowaniu heterogenicznych paliw rakietowych metodą zasypową. Otrzymane próbki paliw metodą zasypową scharakteryzowano pod względem parametrów fizykochemicznych.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2017, 8, 2 (28); 55-70
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of modified atmosphere packaging on the course of physical and chemical changes in chilled muscle tissue of silver carp (Hypophthalmichthys molitrix, V.)
Autorzy:
Jezek, F.
Buchtova, H.
Powiązania:
https://bibliotekanauki.pl/articles/31515.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
modified atmosphere packaging
physical change
chemical change
chilled muscle
muscle tissue
silver carp
Hypophthalmichthys molitrix
freshwater fish
fish
meat oxidation
freshness
oxidative process
Opis:
The effect of two types of modified atmosphere (MA1: 69% N2, 25% CO2, 5%O2, 1% CO; MA2: 70% N2, 30% CO2) on changes in physical and chemical parameters (pH, aw - water activity, TVBN - total volatile basic nitrogen, TMA - trimethylamine, FFA - free fatty acids, PV - peroxide value, TBA - thiobarbituric acid) in muscle tissues of the silver carp was monitored in the study. The samples were stored at temperatures +2 ± 2oC for 18 days. Changes in gas volumes (CO2 and O2) in MAs were also monitored. CO2 levels increased in MA1 but decreased in MA2. At the end of 18 days of storage, a significantly (P < 0.01) lower water activity (aw) levels were found in samples packaged under MA1, in contrast to samples packaged under MA2 where water activity values showed considerable fluctuation. Variations in pH values in the two types of MA showed similar trends. Sample pH gradually decreased until day 9 of storage. On day 11, muscle tissue pH increased markedly and then began to decrease again. The overall decrease in pH values was more profound in samples packaged under MA1. TVBN and TMA levels in samples packaged under the two types of MAs remained almost identical until day 9 of the experiment. Later, however, significantly (P < 0.01) higher levels of both parameters were found in muscle tissues packaged under MA1. FFA concentrations in silver carp samples in MA1 were significantly lower (P < 0.01) throughout the experiment. The PV increased significantly in both muscle samples tested. Greater fluctuations in this parameter’s values throughout the experiment were observed in samples packaged under MA2. Faster rates of oxidation (P < 0.01) were found in samples packaged under MA1 starting on day 9. Maximum TBA values in MA1 and MA2 were observed on days 14 and 18 of the experiment, respectively. From the course of proteolytic and oxidative changes point of view, the more appropriate combination of gases for silver carp storage seems to be the mixture of 70% N2 and 30% CO2 (MA2), which allows for muscle storage of up to 9 days. We recommend TVBN as a suitable indicator of freshness, and TBA assay as a suitable indicator of the extent of oxidative processes.
Źródło:
Polish Journal of Veterinary Sciences; 2012, 15, 3
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the Chemical Unhairing Process on Pulled Wool Characteristics
Autorzy:
Abdellaoui, Olfa
Harizi, Taoufik
Msahli, Slah
Powiązania:
https://bibliotekanauki.pl/articles/2171990.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
ATR-FTIR
red face Barbary sheep
sheep breed
chemical unhairing process
pulled wool
SEM
scanning electron microscopy
X-ray
Opis:
Textile research is being driven to find sustainable materials as an alternative to raw fibers. In fact, reusing fibrous waste, as a byproduct, is one of the most important environmental challenges that confront the world. This research focused on studying pulled wool fibers as a natural fiber to reduce environmental loading. There are large amounts of residual pulled wool fibers that can be recycled and valorised. Therefore, raw and pulled wool fibers were characterized and compared. Scanning Electron Micrographs (SEM) results show that on the pulled wool fiber, the surface became rougher and the scales appear affected and less dense. Based on the X-ray diffraction (XRD) results, the crystallinity of the pulled fiber decreased lightly. Attenuated Total Reflectance-Fourier Transform Infra Red (ATR-FTIR) spectroscopy analyzes presented some changes in chemical composition. A High-Performance Liquid Chromatography (HPLC) test showed an increase in the amount of cystic acids. The pulled wool fiber indicates that it might have damaged some crosslinks of macromolecular chains in the fiber. Thus, physical, chemical and mechanical properties are affected during the chemical unhairing process. This research purpose was to increase the potential for better value of pulled wool as it presents the natural fiber most used in several applications.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 3 (151); 70--78
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies