Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "cable" wg kryterium: Temat


Tytuł:
Detecting and Locating Signal Leakages from Cable TV Networks : A Case Study
Autorzy:
Taha, Hussein
Vári, Péter
Powiązania:
https://bibliotekanauki.pl/articles/27311975.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
MFCN
cable TV
signal leakage
drive test
digital dividend bands
700 MHz
Opis:
Since the digitalization of terrestrial television, many countries have discontinued television broadcasting in the UHF band. The freed-up frequencies are now available as digital dividends for mobile and fixed wireless access communication networks (MFCN), particularly for 4G/5G and public safety services in broadband called BBPPDR. Since cable TV still uses the UHF band, leakage from cable TV networks is the most common cause of interference in MFCN networks. Insufficient containment of the radio frequency signals transmitted through a cable system results in cable signal leakage. This article investigates the significance of controlling electromagnetic signal leaks from cable TV networks and how they impact authorized and standardized MFCN networks in the digital dividend bands. The periodic drivetest approach to detect and measure electromagnetic leakage from a cable TV system in the 700 MHz band at a site is detailed. The causes of the detected leaks and offered the appropriate procedure to repair them are also discussed. Additionally, the current measures taken in Hungary to address cable television signal leakage in the digital dividend bands are also discussed and alternative strategies for the adopted test drive approach are proposed.
Źródło:
International Journal of Electronics and Telecommunications; 2023, 69, 3; 529--536
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parameters that influence the partial discharges occurrence in cavity defect within electrical cable insulation
Autorzy:
Elagoun, Abdelkader
Seghier, Tahar
Powiązania:
https://bibliotekanauki.pl/articles/2203643.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
electrical cable insulation
cavity defect
partial discharge
plasma model
parameters influencing PDs
kabel elektryczny
izolacja
wyładowania niezupełne
model plazmowy
Opis:
The electrical cable reliability is largely linked to the state of its insulation, which can be threatened by the partial discharges (PDs) activity. This phenomenon is localized in defects created within insulation during the manufacture process and the cable installation. The cavity defect is among the most known defects within the insulating material filled with different gases and having various forms. Under electrical stress, the PDs occur and lead with time to a cable failure. The PDs simulation in cavity defect within cable insulation has became an important tool for a complementary understanding of the experimental task. The plasma model has been considered in last decade as an alternative to describe physically and chemically the PDs mechanism versus the other models such as the capacitance, conductance model. Using plasma model our work aims to simulate the PDs in cavity defect within cable insulation by showing the parameters influence such as the type of gas contained in the cavity, the voltage magnitude and frequency imposed on the insulation on their occurrence through its occurrence mechanisms. This helps to assess the PDs severity on the insulation system to carry out its diagnosis and therefore to have an effective reliability of cable.
Źródło:
Diagnostyka; 2023, 24, 2; art. no. 202321
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Remedies to Thermal Radiation in Fused Silica Optical Fibers
Autorzy:
Borzycki, Krzysztof
Jaworski, Marek
Kossek, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2200964.pdf
Data publikacji:
2023
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
attenuation testing
fire resistant fiber optic cable
fire test
fused silica optical fiber
incandescent emission
interference filtering
Opis:
During fire incidents, optical fibers located with-in a fire-resistant cable are usually exposed to temperatures of 800◦C to 1000◦C. Hot fibers generate narrowband thermal (incandescent) radiation and collect broadband thermal radiation originating from the heated surroundings. The power of the second component, initially negligible, increases with time due to the rising number of fiber cracks and other defects acting as couplers for external radiation. Thermal radiation may interfere with fiber attenuation measurements performed during a fire test, but is rather unlikely to prevent data transmission with typical GbE and 10 GbE transceivers during a fire. This problem may be remedied by combining the following methods: using single mode fibers instead of multimode fibers, using bandpass filters to block thermal radiation, and selecting proper transmitter power, wavelength and photodetector.
Źródło:
Journal of Telecommunications and Information Technology; 2023, 1; 88--96
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aktualizacja modelu teoretycznego Mostu Rędzińskiego na podstawie pomiarów konstrukcji, po 10 latach eksploatacji
An updating of the model of the Rędziński bridge based on the structural monitoring, after 10 years of operation
Autorzy:
Żółtowski, Krzysztof
Binczyk, Mikołaj
Kalitowski, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/2142039.pdf
Data publikacji:
2022
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
most podwieszony
Most Rędziński
model numeryczny
kalibracja modelu
pełzanie
metoda elementów skończonych
MES
cable-stayed bridge
Rędziński bridge
numerical model
model updating
creep
finite element method
FEM
Opis:
W roku 2020 zrealizowano prace badawcze, które miały na celu ocenę stanu konstrukcji Mostu Rędzińskiego we Wrocławiu po 10 latach eksploatacji. W ramach badań eksperckich wykonano pomiary sił w wantach mostu metodą wibracyjną, dokonano pomiarów geodezyjnych przęseł i pylonu oraz zbudowano model numeryczny. Model posłużył do oceny aktualnego stanu wytężenia elementów konstrukcji. Konieczne było przeprowadzenie aktualizacji pierwotnego modelu teoretycznego z uwagi na szereg istotnych zmian, które z upływem czasu zachodzą w konstrukcji, a które trudno precyzyjnie oszacować w trakcie projektowania. Zmiany te są efektem pełzania betonu, relaksacji stali i osiadania fundamentów. W artykule przedstawiono proces aktualizacji modelu teoretycznego mostu podwieszonego na podstawie wyników pomiarów. Uwzględniono w niej wpływ technologii budowy, pierwotny naciąg want, efekty reologiczne oraz osiadania podpór. Ostatecznie uzyskano model, w którym siły w wantach oraz trwałe deformacje przęseł i pylonu są zgodne z wartościami pomierzonymi. Potwierdzono, że w modelowaniu konstrukcji podwieszonej bardzo istotne jest precyzyjne określenie ciężaru własnego przęseł oraz sił naciągu w wantach. Niewielkie błędy w ich przyjęciu mogą skutkować dużymi błędami w wyznaczonej geometrii obiektu i siłach wewnętrznych.
In 2020, research was performed to assess the condition of the structure of the Rędziński Bridge in Wrocław after 10 years of operation. As a part of expert research, the forces in the bridge cables were measured using the vibration method, geodetic measurements of the spans and the pylons were made, and a numerical model was created. The model was used to assess the current condition of the structural elements. It was necessary to update the original theoretical model due to a number of significant changes that occur over time in the structure, and which were difficult to precisely estimate during the design. These changes are the results of concrete creep, steel relaxation and foundation subsidence. The paper presents the process of updating the theoretical model of a cable-stayed bridge on the basis of measurement results. It takes into account the influence of construction technology, the primary tension of the cables, rheological effects and subsidence of supports. Finally, a model was obtained in which the forces in the cables and the deformation of the spans and the pylon are consistent with the measured values. It was confirmed that in modelling a cable-stayed bridge, it is very important to precisely determine the dead weight of the spans and the tension forces in the cables. Small errors in their estimation may result in large errors in the determined geometry of the structure and internal forces.
Źródło:
Przegląd Budowlany; 2022, 93, 5-6; 76--81
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kształtowanie mostowych konstrukcji sprężonych na podstawie wniosków z inspekcji zewnętrznych kabli sprężających
Design of prestressed bridge structures based on external prestressing tendons inspection conclusions
Autorzy:
Borsz, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2142045.pdf
Data publikacji:
2022
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
obiekt mostowy
konstrukcja sprężona
awaria
kabel sprężający
kabel zewnętrzny
inspekcja
dostępność
bridge
prestressed construction
failure
prestressing cable
external cable
inspection
accessibility
Opis:
Punktem wyjścia do artykułu są pojawiające się awarie zewnętrznych kabli sprężających opisane w piśmiennictwie zagranicznym jak i coraz częściej w polskich realiach oraz problemy z prowadzeniem prac inspekcyjnych i remontowych na sprężonych obiektach mostowych. Artykuł ma na celu przedstawienie podstawowych zasad kształtowania konstrukcji sprężonych umożliwiających łatwą realizację w fazie budowy oraz prostą inspekcję; serwis jak i remont w fazie użytkowania z uwzględnieniem zapisów wytycznych krajowych oraz zagranicznych. Całość zagadnienia jest omówiona na podstawie istniejących konstrukcji mostowych od fazy projektowania przez użytkowanie i remont ze szczególnym uwzględnieniem odpowiedniego doboru systemu zabezpieczenia antykorozyjnego kabli jak i aspektu inspekcyjnego oraz możliwości wymiany kabli sprężających.
This report’s starting point is about the emerging failures of external prestressing tendons described in foreign literature and more often in the polish infrastructure market. Those failures can be associated with incorrect site implementation works, insufficient and low quality inspections and possible incorrect repairs. The aim of the report is to present the basic assumption of the post tensioned structures with the external post tensioning tendons and optimal strand corrosion protection systems selection to improve the tendons life-time durability, as well as the requirements for the deviators and anchorages including inspection aspects and replacing possibility. The world wide experience and current trends prove that it is necessary to discuss the use of external cables to ensure the designed bridges life span and finally leading to development of national guidelines.
Źródło:
Przegląd Budowlany; 2022, 93, 5-6; 130--135
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nonlinear buckling analysis of network arch bridges
Autorzy:
Błonka, Adrian
Skrętkowicz, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/2086774.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
network arch bridge
post-critical analysis
nonlinear buckling
cable structures
Opis:
The paper presents designing due to the instability in-plane problem of the net-arch bridge. Firstly, three essential nonlinear examples are benchmarked in a finite element software. Secondly, linear and nonlinear buckling analyses are conducted, with the purpose of investigating the impact of nonlinear behavior of cables on steel arch instability, involving a comparison of the critical load factor and form from both the linear buckling and the post-critical third-order theory analyses. The impact of prestress and tension, elevation, and hanger failure on instability is discussed. Moreover, a new method for determining nonlinear buckling form for the net-arch structure is proposed in order to allow implementation of Unique Global and Local Imperfection method in cable structures. Calculations are conducted in the finite element software. The model of the network arch bridge is based on the bridge over Vistula River in Cracow.
Źródło:
Studia Geotechnica et Mechanica; 2022, 44, 2; 123--137
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena nośności konstrukcji pylonu Mostu Rędzińskiego po 10 latach eksploatacji. Propozycje działań utrzymaniowych
An assessment of the pylon capacity of the Rędziński bridge after 10 years of exploitation. Recommendations for maintenance activities
Autorzy:
Żółtowski, Krzysztof
Binczyk, Mikołaj
Kalitowski, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/2142050.pdf
Data publikacji:
2022
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
most podwieszony
Most Rędziński
model numeryczny
pylon
sprężenie
trwałość rygla
zarysowanie
metoda elementów skończonych
MES
ocena nośności
cable-stayed bridge
Rędziński bridge
numerical model
prestressing
transverse beam durability
cracking
finite element method
FEM
bearing capacity evaluation
Opis:
Pylon mostu podwieszonego jest głównym elementem konstrukcyjnym przenoszącym niemal całe obciążenie z przęseł na fundamenty. W Moście Rędzińskim bardzo ważną rolę w pracy pylonu odgrywa rygiel dolny. Jest to żelbetowy element obciążony rozporem wynikającym z pochylenia nóg pylonu oraz reakcjami z przęseł. Jest zatem silnie rozciąganą i zginaną belką, ekscentrycznie sprężoną. Po ujawnieniu zarysowań w ryglu przystąpiono do kompleksowej oceny problemu. W artykule opisano budowę modelu numerycznego oraz wykonane obliczenia. Rezultaty obliczeń wskazały na silną zależność pomiędzy rozkładem poprzecznym reakcji z przęseł, a wytężeniem rygla. Wynika to z zastosowania sprężenia ekscentrycznego oraz trudności w precyzyjnym określeniu rozkładu sił przekazywanych przez przęsło bezpośrednio na rygiel. Podsumowaniem przeprowadzonych analiz jest propozycja wykonania dodatkowego sprężenia zewnętrznego rygla dolnego pylonu w celu podniesienia nośności oraz wydłużenia trwałości.
A pylon of the cable-stayed bridge is the crucial construction element that carries almost all loads from the span to the foundation. In the Rędziński Bridge in Wroclaw, the transverse lower beam of the pylon acts a significant role. It is a prestressed RC beam loaded by expansion forces from the tilted towers and support forces from the span. In consequence, it is the bent, tensioned element, which is eccentrically prestressed. The paper describes the building process of the numerical FEM model and conducted calculations. The analysis includes loads from the cables, support forces from the span, construction stages, concrete rheology as well as prestressing of the lower transverse beam. The results indicated the strong influence of the transverse distribution of the support forces on the effort of the transverse beam. This is due to the eccentricity of the prestressing and lack of precise determination of the support forces from the span acting directly on the transverse beam. It was concluded, that intuitive reparation by lowering support forces with increasing the cable forces could increase the effort of the beam also. In summary, it was proposed to add external prestressing of the lower transverse beam to increase its capacity and durability.
Źródło:
Przegląd Budowlany; 2022, 93, 5-6; 82--87
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technical diagnostics of industrial double twist twinner machine for data cables
Autorzy:
Krenický, Tibor
Ružbarský, Juraj
Coranič, Tomáš
Maščeník, Jozef
Powiązania:
https://bibliotekanauki.pl/articles/2175488.pdf
Data publikacji:
2022
Wydawca:
STE GROUP
Tematy:
vibrodiagnostics
maintenance
twisted pair cables
return loss
cable fault
wibrodiagnostyka
konserwacja
kable typu skrętka
usterka kabla
Opis:
The presented article focuses on the diagnostic measurement and evaluation of vibrations of equipment used for data-cable twisted pairing manufacture. A short description of the process of the data cables manufacturing process to which the diagnosed device belongs is provided and the qualitative parameters of the data cables are mentioned. The experimental part is devoted to the experimental diagnostics of the given system in order to locate and identify the possible reason for the occurrence of the parameter´s critical value of the loss of the data cable. When deterioration of electric properties was detected, monitoring the basic oscillation characteristics has been deployed as the key tool to detecting damaged machine parts, and avoiding quality deterioration of the products in the manufacturing process. Finally, the quality of the paired cables after the repair has been confirmed by measurements verifying the efficiency of the measures performed.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2022, 11, 2; 35--46
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A manual winch project with a two way ratchet mechanism
Projekt ręcznej wciągarki z dwustronnym mechanizmem zapadkowym
Autorzy:
Zagórski, Krzysztof
Stompor, Daniel
Powiązania:
https://bibliotekanauki.pl/articles/2106540.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
manual winch
ratchet mechanism
cable
rope
pulley
off-road vehicle
wciągarka ręczna
mechanizm zapadkowy
cięgno
lina
zblocze
samochód terenowy
Opis:
The article describes a solution to an engineering problem concerning the development of a design of a manual winch for off-road vehicle users. The aim of the design is to provide the possibility of extracting an off-road vehicle which is not equipped with an electric winch in the event it becomes stuck in mud or sand. The concept was based on a review of available solutions on the market and an analysis of their advantages and disadvantages. The design was based on calculations performed in accordance with the literature recommendations and FEM strength analyses carried out on a model created using Autodesk Inventor Professional 2020. The developed device is able to provide a pulling force of over 50 kN with an unladen weight of 35 kg, and also provides the possibility of controlled lowering of the load.
W artykule opisano rozwiązanie problemu inżynierskiego dotyczącego opracowania projektu wciągarki ręcznej z myślą o użytkownikach samochodów terenowych. Opracowanie projektu takiego urządzenia ma na celu zapewnienie możliwości samodzielnego wyciągnięcia ugrzęzłego w błocie lub piasku samochodu terenowego niewyposażonego we wciągarkę elektryczną. Koncepcja powstawała w oparciu o dokonany przegląd dostępnych na rynku rozwiązań i analizę ich wad i zalet. Projekt wykonano na podstawie obliczeń przeprowadzonych w myśl zaleceń z literatury i analiz wytrzymałościowych MES przeprowadzonych na modelu utworzonym w programie Autodesk Inventor Professional 2020. Opracowane urządzenie jest w stanie zapewnić uciąg wynoszący ponad 50 kN przy masie własnej równej 35 kg, ponadto zapewnia możliwość kontrolowanego opuszczania ciężaru.
Źródło:
Mining – Informatics, Automation and Electrical Engineering; 2021, 59, 2; 33-39
2450-7326
2449-6421
Pojawia się w:
Mining – Informatics, Automation and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Accurate Location of Fiber Cable Fault with OTDR
Autorzy:
Borzycki, Krzysztof
Gajewski, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2058489.pdf
Data publikacji:
2021
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
fault location
fiber optic cable
helix factor
OTDR
single-mode fiber
Opis:
The paper reviews the factors limiting the accuracy of locating a fiber optic cable fault when using an optical time domain reflectometer (OTDR) and describes an error estimation method for typical use cases. The primary source of errors lies in the complex relationship between the length of the optical fiber (measured by OTDR), its routing, cable design depending on cable design and type of installation (i.e. duct, directly buried, aerial) as well as the spare lengths used for service purposes. The techniques which considerably improve the accuracy of the fault localization processes are presented, the importance of accurate documentation of the network and of referencing the fault location to the nearest splice instead of end of the line are discussed, as is the absence of cable helix factor in data sheets.
Źródło:
Journal of Telecommunications and Information Technology; 2021, 4; 42--52
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determinants and relations of competition and performance in cable manufacturing industry
Uwarunkowania i zależności konkurencji i wyników w przemyśle produkcji kabli
Autorzy:
Setiawan, Adam Putranto
Primiana, Ina
Sule, Ernie Tisnawati
Kaltum, Umi
Powiązania:
https://bibliotekanauki.pl/articles/2021094.pdf
Data publikacji:
2021
Wydawca:
Politechnika Częstochowska
Tematy:
competitive strategy
business performance
government regulation
industry competition
supply chain integration
cable industry
PLS
strategia konkurencji
wyniki biznesowe
regulacje rządowe
konkurencja branżowa
integracja łańcucha dostaw
przemysł kablowy
Opis:
The objective of this paper is to empirically test the impact of government regulation, industry competition, and supply chain integration on cable manufacturers’ competitive strategy and how these factors affect manufacturers’ performance. There has not been much focus given by previous studies on cable manufacturers’ competition strategy, especially in emerging economies. Therefore, there is a lack of consensus regarding the determinants of cable manufacturers’ competitive strategy and its impact on business performance. Filling this gap and providing recommendations for both cable manufacturing and regulators to improve the cable manufacturing industry’s performance, the present study has been executed, and this proposed research also provides the novelties to this paper. Partial least square estimation was used with data from 31 cable manufacturers in Indonesia. The estimation result shows that cable manufacturers’ competitive strategy is significantly affected by industry competition and supply chain integration, while the government regulation variable is not significant. Regarding business performance, industry competition has the largest total effect, followed by supply chain integration, competitive strategy, and government regulation, respectively.
Celem tego artykułu jest empiryczne przetestowanie wpływu regulacji rządowych, konkurencji branżowej i integracji łańcucha dostaw na strategię konkurencyjną producentów kabli oraz wpływu tych czynników na wyniki producentów. W poprzednich badaniach nie poświęcono zbyt wiele uwagi strategii konkurencji producentów kabli, zwłaszcza w gospodarkach wschodzących. Dlatego nie ma zgody co do determinantów strategii konkurencyjnej producentów kabli i jej wpływu na wyniki biznesowe. Wypełniając tę lukę i przedstawiając zalecenia zarówno dla producentów kabli, jak i dla organów regulacyjnych w celu poprawy wydajności przemysłu produkcji kabli, przeprowadzono niniejsze badanie, a proponowane badanie dostarcza również nowości do tego artykułu. Zastosowano częściowe oszacowanie metodą najmniejszych kwadratów z danymi od 31 producentów kabli w Indonezji. Wynik oszacowania pokazuje, że konkurencja w branży i integracja łańcucha dostaw znacząco wpływają na strategię konkurencyjną producentów kabli, podczas gdy zmienna regulacyjna rządu nie jest znacząca. Jeśli chodzi o wyniki biznesowe, największy łączny wpływ ma konkurencja w branży, a następnie odpowiednio integracja łańcucha dostaw, strategia konkurencji i regulacje rządowe.
Źródło:
Polish Journal of Management Studies; 2021, 23, 1; 341-351
2081-7452
Pojawia się w:
Polish Journal of Management Studies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Forma architektoniczna obiektów o konstrukcji cięgnowej
Architectural form of cable-supported structures
Autorzy:
Tofil, Jolanta
Powiązania:
https://bibliotekanauki.pl/articles/1848257.pdf
Data publikacji:
2021
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
konstrukcja cięgnowa
forma architektoniczna
prawdziwość
struktura
cable-supported structure
architectural form
verity
structure
Opis:
Mario Salvadori zaznacza, że struktura może istnieć bez architektury – jako przykład wskazuje maszyny - a architektura nie może istnieć bez struktury [14]. Za zasadnością podjętych rozważań może przemawiać przekonanie, iż elementy konstrukcji cięgnowej odpowiedzialne za statykę obiektów nie stanowią jedynie strukturalnej osnowy, lecz odgrywają istotną rolę w określaniu formy owej architektury. Metody użyte w badaniach nad tym zagadnieniem opierają się głównie na przeglądzie literatury, obserwacjach własnych oraz wielokrotnym studium przypadku.
Mario Salvadori states that structure can exist without architecture, giving machines as examples but architecture cannot exist without structure [1]. The reasoning behind the considerations in the article may be the belief that the elements of the cable-supported structure responsible for the statics of objects are not only the structural matrix, but play an important role in determining the form of the architecture. The methods used in the studies on this issue are mainly based on a literature review, own observations and multiple case studies.
Źródło:
Builder; 2021, 25, 7; 55-57
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Temperature Effects in Fused Silica Optical Fibers
Autorzy:
Borzycki, Krzysztof
Jaworski, Marek
Kossek, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/1839330.pdf
Data publikacji:
2021
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
fire-resistant fiber optic cable
fire test
fused silica optical fibers
incandescence spectrum
thermal deterioration
thermal radiation
Opis:
Fire-resistant fiber optic cables used in safety and monitoring systems playing an essential role in fire fighting and building evacuation procedures are required to temporarily maintain optical continuity when exposed to fire. However, the use of fused silica fiber at temperatures between 800◦C and 1000◦C is associated with two highly undesirable phenomena. Thermal radiation (incandescence) of optical fibers, with its intensity and spectral distribution being proportional to additional attenuation observed in the fiber’s hydroxyl absorption bands (“water peaks”) is one of them. The other consists in penetration of thermal radiation from the surroundings into the fiber, due to defects in glass, causing light scattering and resulting in fiber brittleness. Thermal radiation is a source of interference in fiber attenuation measurements performed during fire tests and affects normal operation of fiber optic data links in the event of a fire. In this article, results of laboratory tests performed on a telecom single mode and multimode fibers subjected to temperatures of up to 1000◦C are presented.
Źródło:
Journal of Telecommunications and Information Technology; 2021, 3; 56-71
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kotew strunowa IR-7 – nowe szanse na poprawę efektywności obudowy podporowo-kotwowej
Cable bolt type IR-7 - new opportunities to improve the efficiency of the steel set-bolt support
Autorzy:
Rak, Zbigniew
Stasica, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/2097686.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
kotew strunowa
naciąg wstępny
wzmacnianie obudowy
obudowa podporowa
cable bolts
pre-tensioning reinforcement of support
standing support
Opis:
Artykuł prezentuje najnowsze rozwiązanie kotwi strunowej IR-7, którego wdrożenie rozpoczęto w polskim górnictwie węgla kamiennego w 2021 r. W artykule przedstawiono podstawowe informacje w zakresie konstrukcji i instalacji kotew IR-7. Konstrukcja kotwi oparta jest o najlepsze rozwiązania stosowane na świecie jak Sumo Bolt lub Titan Bolt. IR-7 łączy najlepsze właściwości rozwiązań światowych, zachowując przy tym giętkość. Cechą charakterystyczną kotwi IR-7 jest wysoka nośność oraz możliwość nadawania naciągu wstępnego, co pozwala na prawie natychmiastową współpracę z górotworem w miejscu jej zabudowy. Budowa kotwi umożliwia iniekcję spoiwa i w efekcie wklejenie cięgna na całej długości otworu. Rozwiązanie zamka kotwi w postaci zacisku Gifforda daje niespotykane dotąd możliwości niezależnej współpracy kotwi z górotworem oraz obudową podporową.
The article presents the latest solution of the IR-7 cable bolt, the implementation of which began in the Polish hard coal mining industry in 2021. In addition, information on the design and installation of the IR-7 anchors was provided. The design of the anchor is based on the best solutions used in the world, such as Sumo Bolt or Titan Bolt. The IR-7 anchor combines the best properties of global solutions while maintaining flexibility. A characteristic feature of the presented anchor is its high load-bearing capacity and the ability to apply pre-tension, which allows for almost immediate cooperation of the anchor with the rock mass at the place of its installation. The construction of the anchor allows the injection of the binder and, as a result, its embedding along the entire length of the hole. The solution of the anchor it lock in the form of a Gifford clamp gives unprecedented possibilities of independent cooperation of the bolt with the rock mass and the support casing. The solution of the anchor lock in the form of a Gifford clamp gives unprecedented possibilities of independent cooperation of the bolt with the rock mass and the steel set support. The use of the IR-7 anchor should bring good results in terms of improving the stability of excavations in the steel set-anchor support. It is also a chance to increase the spacing of the steel set’s frames, thus reducing the costs of driving workings and exploitation by means of the longwall mining method.
Źródło:
Przegląd Górniczy; 2021, 77, 10-12; 11--17
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Projekt ręcznej wciągarki z dwustronnym mechanizmem zapadkowym
A manual winch project with a two way ratchet mechanism
Autorzy:
Zagórski, Krzysztof
Stompor, Daniel
Powiązania:
https://bibliotekanauki.pl/articles/2106523.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
wciągarka ręczna
mechanizm zapadkowy
cięgno
lina
zblocze
samochód terenowy
manual winch
ratchet mechanism
cable
rope
pulley
off-road vehicle
Opis:
W artykule opisano rozwiązanie problemu inżynierskiego dotyczącego opracowania projektu wciągarki ręcznej z myślą o użytkownikach samochodów terenowych. Opracowanie projektu takiego urządzenia ma na celu zapewnienie możliwości samodzielnego wyciągnięcia ugrzęzłego w błocie lub piasku samochodu terenowego niewyposażonego we wciągarkę elektryczną. Koncepcja powstawała w oparciu o dokonany przegląd dostępnych na rynku rozwiązań i analizę ich wad i zalet. Projekt wykonano na podstawie obliczeń przeprowadzonych w myśl zaleceń z literatury i analiz wytrzymałościowych MES przeprowadzonych na modelu utworzonym w programie Autodesk Inventor Professional 2020. Opracowane urządzenie jest w stanie zapewnić uciąg wynoszący ponad 50 kN przy masie własnej równej 35 kg, ponadto zapewnia możliwość kontrolowanego opuszczania ciężaru.
The article describes a solution to an engineering problem concerning the development of a design of a manual winch for off-road vehicle users. The aim of the design is to provide the possibility of extracting an off-road vehicle which is not equipped with an electric winch in the event it becomes stuck in mud or sand. The concept was based on a review of available solutions on the market and an analysis of their advantages and disadvantages. The design was based on calculations performed in accordance with the literature recommendations and FEM strength analyses carried out on a model created using Autodesk Inventor Professional 2020. The developed device is able to provide a pulling force of over 50 kN with an unladen weight of 35 kg, and also provides the possibility of controlled lowering of the load.
Źródło:
Mining – Informatics, Automation and Electrical Engineering; 2021, 59, 2; 40-46
2450-7326
2449-6421
Pojawia się w:
Mining – Informatics, Automation and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies