Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "brace" wg kryterium: Temat


Tytuł:
Numerical and experimental analysis of orthopedic brace for treatment of idiopathic scoliosis
Autorzy:
Grycuk, Sławomir
Mrozek, Piotr
Powiązania:
https://bibliotekanauki.pl/chapters/2215316.pdf
Data publikacji:
2022
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
brace
FEM
ESPI
out of plane displacement
Opis:
The main objective of the work presented in this chapter is to identify the working scheme of the brace’s structure, subsequently enabling identification of the possibilities of potential brace design optimization. This chapter presents the results of numerical simulations concerning a Boston-type orthopedic brace with the use of the finite element method (FEM) in the Ansys Workbench environment. Reverse engineering methodology was employed to develop the geometric model, based on the results of digitization performed by an optical 3D scanner. To experimentally verify the FEM model, a test stand for measurement of the brace’s field of displacements, equipped with a laser electronic speckle pattern interferometer (ESPI), was used. Special attention was paid to representing the loads and boundary conditions of numerical simulations in experimental tests. Ultimately, the relative difference between numerical and experimental results in displacements in the central part of the brace’s front wall did not exceed 0.9%. The force flow trajectories characteristic of the brace’s shell were determined using the experimentally confirmed FEM model, revealing the overall way of its operation. The main areas of the brace carrying loads correcting the spine and sites performing little effort, from the perspective of their participation in the brace’s fundamental therapeutic application, were identified. The conducted analysis is universal in nature and can be adapted to other types of orthopedic braces. The results obtained allow for the proposal of methods for mechanical optimization of the brace’s design.
Źródło:
Advances in biomedical engineering; 15-30
9788367185400
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elastic-plastic analysis for circumferential through crack at boundary of semi’s brace under beam wave
Autorzy:
Wang, F.
Deng, X.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/260258.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
theoretical model
crack damaged brace
semi-submersible platform
beam wave
Opis:
In order to ensure the safety and reliability of the horizontal brace of semi-submersible platform (SEMI) which functions as the supporting structure in SEMI, this article presents an elastic-plastic method to analyze the variations of the crack tip opening displacement, elastic zone and plastic zone of the cracked section of the horizontal brace under beam wave. The brace of the SEMI was assumed to be located a circumferential through crack at its boundary in this article. In addition, the cracked section of the brace has been divided into crack zone, tensile plastic zone, elastic zone and compressive plastic zone in the presented theoretical model. Moreover, the closed form of the solution has been found in this article which is especially suitable solving complicated problems in practical engineering application. Also, a typical new-generation SEMI that is in practical use was selected to analyze the variation tendency of the cracked brace’s parameters using the proposed model which could give good suggestion to semi-submersible platform designers and managers.
Źródło:
Polish Maritime Research; 2018, 4; 106-113
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compare the behavior factor of the ultimate resistance of moment frame, plain and perforated steel plate shear walls, and buckling restrained brace as yielding metal damper
Autorzy:
Ashrafi, H. R.
Shahbazian, K.
Bidmeshki, S.
Yaghooti, S.
Beiranvand, P.
Powiązania:
https://bibliotekanauki.pl/articles/102459.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
behavior factor
ultimate resistance
steel plate shear walls
buckling restrained brace
Opis:
Steel moment frame systems, steel plate shear walls and also buckling restrained brace (BRB) are considered as the most widely used seismic resistant systems of the world. Firstly, in this research, in order to validate the finite element models, the tested sample of steel plate shear walls of 4 floors at the University of Alberta, Canada, and the tested sample of buckling restrained brace at the University of Berkeley California, with the software ABAQUS 6.10-1 were used. Then, the obtained results of the test and analysis have been compared. The confirmed models have been used for the analysis of two-dimensional frame of plain and perforated steel plate shear walls with a regular pattern of positing holes in the screen, buckling restrained brace and moment frame of 4 floors.
Źródło:
Advances in Science and Technology. Research Journal; 2016, 10, 29; 1-12
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fremdes oder Eigenes in der Satzstruktur? – Zu einigen kognitiven Aspekten der Verbalklammer im Deutschen
Foreign or native phrase elements? – Cognitive aspects of the verbal bracket in German
Autorzy:
Sakowski, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/679519.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
verbal brace
cognitive linguistics
verbal separability
Ronald W. Langacker
cognitive grammar
-
Opis:
This paper will show why in the German language, such complicated structures as the verbal brace is so prevalent despite obviously presenting a cognitive challenge for foreign language learners. The verbal brace should therefore be studied both from the diachronic and from the contrastive perspectives to show whether it is exclusively a German structure or whether this development has appeared in other Germanic languages too. It is also interesting to consider what it is about the special performance of this structure which has contributed to its success.
-
Źródło:
Acta Universitatis Lodziensis. Folia Germanica; 2016, 12; 37-47
2449-6820
Pojawia się w:
Acta Universitatis Lodziensis. Folia Germanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The early results of the treatment of idiopathic scoliosis using the dynamic SpineCor brace
Wczesne wyniki leczenia skolioz idiopatycznych z zastosowaniem gorsetu dynamicznego SpineCor
Autorzy:
Potaczek, Tomasz
Zarzycka, Maja
Lipik, Ewa
Jasiewicz, Barbara
Zarzycki, Michał
Kokot, Anna
Powiązania:
https://bibliotekanauki.pl/articles/1942905.pdf
Data publikacji:
2008
Wydawca:
Akademia Wychowania Fizycznego im. Bronisława Czecha w Krakowie
Tematy:
idiopathic scoliosis
conservative treatment
dynamic brace
skolioza idiopatyczna
leczenie zachowawcze
gorset dynamiczny
Opis:
Introdcution: Idiopathic scoliosis is a three-dimensional deformation of the spine. Treatment of this condition depends on many factors, with curve magnitude (Cobb angle) and skeletal maturity (Risser sign) being the most important indices. In progressing curves of <40°, bracing is recommended. Different types of braces are available, most of them are of a rigid type. The SpineCor dynamic brace is a system of elastic bands designed to directly correct the spinal column deformity without restricting motion of the spine. Aim of the paper: The aim of this paper is to present early results of adolescent idiopathic scoliosis treatment with the SpineCor brace. Material and methods: Inclusion criteria for brace the application included the presence of a progressing curve in a skeletally immature child (Risser 0 – 3). The SpineCor brace was applied according to the principles of the method. The study group comprised 42 patients: 36 girls, 6 boys. The mean age at brace application was 11.9 years. The mean follow-up was 11 months. The mean initial curve size in the whole group was 33.1° in the thoracic spine and 29.4° in the lumbar spine. The evaluated group was subsequently divided into different subgroups depending on: initial curve size, curve type and sex. Results were classified as correction (decrease of curve size of >=5°), stablisation (curve change +/- 5°) or progression (increase of curve size of >=5°).Results: Mean curve size at the final follow-up was 29.7° in the thoracic spine and 25.5° in the lumbar spine. Twenty one patients improved (50%), 14 had curve stabilisation (33.3%) and 7 progressed (16.6%). The best results were achieved in curves lower than 25° Cobb angle (p < 0.05) - 60% of patients improved. In contrast, in the over-45° group, only 37.5% of patients improved. No significant differences were found between treatment results with regard to sex.Conclusion: SpineCor brace seems to be a good alternative for rigid braces, especially in minor curves. It enables preservation of motion of the spine. This type of brace is easily accepted by young patients. Further follow-up is needed to present long-term results.
Wstęp: Skolioza idiopatyczna to trój płaszczyznowa deformacja kręgosłupa. Leczenie uzależnione jest od wielu czynników, spośród których wielkość skrzywienia i stopień dojrzałości kostnej wydaja się być najbardziej istotne. W przypadku progresujacych skrzywień o kacie <40° zalecane jest stosowanie gorsetu. Dostępnych jest wiele rodzajów gorsetów, najczęściej o sztywnej konstrukcji. Gorset dynamiczny SpineCor to system elastycznych taśm, które po założeniu bezpośrednio korygują deformacje kręgosłupa nieograniczając jego ruchomości. Cel pracy: Celem pracy jest przedstawienie wczesnych wyników leczenia skolioz idiopatycznych z zastosowaniem gorsetu dynamicznego SpineCor. Materiał i metodyka: Kryterium rozpoczęcia leczenia gorsetem była obecność progresującego skrzywienia kręgosłupa u chorych z dojrzałością kostna według Rissera 0–3. Aplikacja gorsetu odbywało się według założeń metody. Badana grupę stanowiło 42 chorych, 36 dziewcząt i 6 chłopców. Wiek w chwili rozpoczęcia leczenia wynosił średnio 11,9 lat. Okres obserwacji wynosił średnio 11 miesięcy. Wyjściowy kat skrzywienia w odcinku piersiowym wynosił średnio 33,1°, zaś w odcinku lędźwiowym 29,4°. Badana grupa została podzielona na podgrupy na podstawie: wielkości wyjściowego skrzywienia, lokalizacji skrzywienia, płci. Wyniki oceniano jako korekcje (zmniejszenie kata o >=5°), stabilizacje (zmiana kata +/- 5°) lub progresje (zwiększenie kata o >=5°). Wyniki: Wielkość kata skrzywienia w ostatniej kontroli w odcinku piersiowym wyniosła średnio 29,7°, zaś w odcinku lędźwiowym 25,5°. U 21 chorych skrzywienie uległo korekcji (50%), 14 osiągnęło stabilizacje (33,3%) a 7 progresje (16,6%). Najlepsze wyniki osiągnięto
Źródło:
Medical Rehabilitation; 2008, 12(2); 9-14
1427-9622
1896-3250
Pojawia się w:
Medical Rehabilitation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary results of Scheuermann’s hyperkyphosis treatment with a brace
Wstępne wyniki leczenia choroby Scheuermanna gorsetem ortopedycznym
Autorzy:
Międlar, Ingrid
Deja, Agata
Adamczak-Buziak, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/1972223.pdf
Data publikacji:
2014
Wydawca:
Akademia Wychowania Fizycznego im. Bronisława Czecha w Krakowie
Tematy:
Scheuermann’s disease
brace
thoracic hyperkyphosis
Choroba Scheuermanna
gorset ortopedyczny
hiperkifoza piersiowa
Opis:
Aim of the study: The aim of the study was an evaluation of the preliminary results of Scheuermann’s hyperkyphosis treatment with a brace. In-brace correction achieved with a brace treatment for hyperkyphosis was analysed.Material and Methods: The study group consisted of 21 children (19 boys and 2 girls) with an average age of 14.5±5.34 years (12-18 years), treated with brace because of Scheuermann’s kyphosis at the Rehabilitation Ward for Children in Sopot (Poland). Inclusion criteria for brace treatment included Stagnara angle (Cobb angle TH4-TH12) 50° or more and Risser<4. In-brace correction on X-ray in lateral, standing projection using the Stagnara method was measured and compared to the initial angle before brace treatment.Results: The average Stagnara angle without a brace was 62.5° and with a brace was 48.2°. Analysis of X-ray of in-brace correction revealed that all except one patient had significant kyphosis correction in a brace. The average Stagnara angle of the kyphosis decreased by 23%.Conclusion: A rigid extensional brace for the treatment of thoracic hyperkyphosis provides a significant, very good initial in-brace correction of deformation. The percentage of initial hyperkyphosis of in-brace correction is similar in children aged 12-14 years and 15-18 years, with a slightly better correction in younger children. The percentage of initial hyperkyphosis of in-brace correction does not depend on the initial Stagnara angle on the start time of the brace treatment. A follow-up study seems desirable before a final conclusion for brace effectiveness can be drawn.
Cel: Celem pracy jest ocena wstępnych wyników leczenia gorsetem ortopedycznym hiperkifozy piersiowej w przebiegu choroby Scheuermanna. Przeanalizowano wstępną korekcję hiperkyfozy w gorsecie ortopedycznym. Materiał i metody: Grupę badaną stanowiło 21 dzieci (19 chłopców i 2 dziewczynki) w średnim wieku 14,5±5,34 lat (12-18 lat), leczonych gorsetem ortopedycznym ze zdiagnozowaną hiperkifozą piersiową w przebiegu choroby Scheuermanna w Oddziale Rehabilitacyjnym dla Dzieci w Sopocie (Polska), u których kąt kifozy według Stagnary (kąt Cobba Th4-Th12) przez rozpoczęciem leczenia wyniósł 50° i więcej, a test Rissera wyniósł poniżej 4. U pacjentów zmierzono kąt Stagnary kifozy piersiowej na zdjęciu RTG kręgosłupa piersiowego w projekcji bocznej na stojąco w gorsecie i porównano wynik do wstępnego kąta według Stagnary przed leczeniem gorsetem. Wyniki: Średni kąt Stagnary bez gorsetu wyniósł 62,5°. Po wykonaniu zdjęć rentgenowskich w gorsecie ortopedycznym ich analiza wykazała, że u wszystkich pacjentów (oprócz jednego) uzyskano znamienną korekcję kifozy. Średni kąt Cobba kifozy piersiowej u badanych osób wyniósł 48,2° co oznacza, że zmniejszył się o 23%. Wnioski: Sztywny gorset ekstensyjny, stosowany w leczeniu hiperkifozy piersiowej w przebiegu choroby Scheuermanna, zapewnia znamienną, bardzo dobrą wstępną korekcję deformacji. Procentowy stopień wstępnej korekcji kifozy przez gorset jest zbliżony w grupie dzieci 12-14 lat i 15-18 lat z nieznacznie lepszą korekcją u dzieci młodszych. Procentowy stopień wstępnej korekcji hyperkifozy nie zależy od wielkości kąta Cobba w chwili rozpoczęcia leczenia gorsetem. Dalsze badania są wskazane do ostatecznej oceny skuteczności leczenia gorsetem.
Źródło:
Medical Rehabilitation; 2014, 18(4); 23-27
1427-9622
1896-3250
Pojawia się w:
Medical Rehabilitation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An evaluation of the efficiency of endpoint control on the correction of scoliotic curve with brace : A case study
Autorzy:
Karimi, Mohammad
Rabczuk, Timon
Luthfi, Mauludin
Pourabbas, Babak
Esrafilian, Amir
Powiązania:
https://bibliotekanauki.pl/articles/949744.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
skolioza
FEM
metoda elementów brzegowych
scoliosis
brace
finite element analysis
boundary condition
Opis:
The use of braces is one of the conservative treatment approaches recommended for scoliotic subjects. However, the main question posted here is how to improve the efficiency of braces to control the scoliotic curve or to decrease its progression. The aim of this study was to evaluate the efficiency of various boundary conditions (endpoint control) of brace on the correction of scoliotic curves. Method: CT scan images of a scoliotic subject, with double lumbar and thoracic curves, was used to produce 3d model of spine. The correction of spine (decrease in scoliotic curves) was determined following the use of transverse (lateral-to-medial direction) and the combination of transverse and vertical (upward-directed force, traction) forces on spine in Abaqus software. The effects of pelvic fixation (pelvic basket of a brace) on both sides (basket enclosed pelvic in both sides), on one side (basket enclosed the pelvis in only one side), and fixation of lumbar (part of the brace encircled the lumbar area) were evaluated in this study. Results: The results of this study showed that the effect of vertical forces (traction) was more than that of transverse force. Moreover, the combination of vertical and transverse forces on lumbar and thoracic curves correction was more than that of other conditions (only transverse forces). The best correction was achieved with lumbar fixation and with combination of vertical and transverse forces. Conclusions: The use the combination of vertical and transverse forces may be suggested to correct the scoliotic curve. Moreover, the efficiency of lumbar fixation in frontal plane seems to be more than pelvic fixation to correct scoliotic curve. The outputs of this study can be used to design new braces for scoliotic subjects.
Źródło:
Acta of Bioengineering and Biomechanics; 2019, 21, 2; 3-10
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of brace stiffness influence on stability of the truss
Autorzy:
Krajewski, M.
Iwicki, P.
Powiązania:
https://bibliotekanauki.pl/articles/266180.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
buckling load
limit load
brace stiffness
imperfection
kratownica
analiza numeryczna
konstrukcje stalowe
Opis:
The paper is devoted to the numerical and experimental research of stability of a truss with side elastic supports at the top chord. The structure is a model of a real roof truss scaled by factor ¼. The linear buckling analysis and non-linear static analysis were carried out. The buckling length factor for the compressed top chord was calculated and the limit load for the imperfect truss shell model with respect to brace stiffness was obtained. The relation between brace normal force and loading of the truss is presented. The threshold stiffness of braces necessary to obtain the maximum buckling load was found. The truss load bearing capacity obtained from numerical analysis was compared with Eurocode 3 requirements.
Źródło:
International Journal of Applied Mechanics and Engineering; 2015, 20, 1; 97-108
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biofilm production and enzyme activity of Candida strains isolated from patients with dental braces
Autorzy:
Krzysciak, P.
Grzegocka, K.
Biedrzynska, P.
Lipiarz, A.
Talaga, K.
Loster, B.
Powiązania:
https://bibliotekanauki.pl/articles/6016.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Parazytologiczne
Tematy:
biofilm
production
Candida
oral cavity
enzyme activity
isolation
patient
dental brace
orthodontics
treatment
Źródło:
Annals of Parasitology; 2016, 62, Suppl.
0043-5163
Pojawia się w:
Annals of Parasitology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Global buckling prevention condition of all-steel buckling restrained braces
Autorzy:
Hoveidae, N.
Rafezy, B.
Powiązania:
https://bibliotekanauki.pl/articles/949153.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
all-steel buckling restrained brace
global buckling
finite element analysis
contact friction coefficient
cyclic loading
Opis:
One of the key requirements for the desirable mechanical behavior of buckling restrained braces (BRBs) under severe lateral loading is to prevent overall buckling until the brace member reaches sufficient plastic deformation and ductility. This paper presents finite element analysis results of proposed all-steel buckling restrained braces. The proposed BRBs have identical core sections but different Buckling Restraining Mechanisms (BRMs). The objective of the analyses is to conduct a parametric study of BRBs with different amounts of gaps and cores and BRM contact friction coefficients to investigate the global buckling behavior of the brace. The results of the analyses showed that BRM flexural stiffness could significantly affect the global buckling behavior of a BRB. However, the global buckling response occurred to be strongly dependent upon the magnitude of the friction coefficient between the core and the encasing contact surfaces. In addition, the results showed that the global buckling response of BRBs with direct contact of the core and BRM is more sensitive to the magnitude of contact friction coefficient.
Źródło:
Journal of Theoretical and Applied Mechanics; 2013, 51, 4; 891-902
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Differences in deformity and bracing-related stress between rural and urban area patients with adolescent idiopathic scoliosis treated with a Cheneau brace
Autorzy:
Misterska, E.
Glowacki, M.
Ignys-O'Byrne, A.
Latuszewska, J.
Lewandowski, J.
Ignys, I.
Krauss, H.
Piatek, J.
Powiązania:
https://bibliotekanauki.pl/articles/50923.pdf
Data publikacji:
2011
Wydawca:
Instytut Medycyny Wsi
Tematy:
deformity
bracing-related stress
rural area
urban area
patient
adolescent
idiopathic scoliosis
treatment
Cheneau brace
Źródło:
Annals of Agricultural and Environmental Medicine; 2011, 18, 2
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of a Multifunctional Intelligent Elbow Brace (MIEB) Using a Knitted Textile Strain Sensor
Autorzy:
Salam, Abdul
Phan, Duy-Nam
Khan, Saif Ullah
Ul Hassan, Syed Zameer
Hassan, Tufail
Muhammad, Raja
Ullah Khan, Waseem
Pasha, Khalid
Khan, Muhammad Qamar
Kim, Ick Soo
Powiązania:
https://bibliotekanauki.pl/articles/2056325.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
elbow brace
conductive yarn
textile strain sensor
polyester blend
silver blend
hand-knitted structure
bowling action
Opis:
Passive smart textiles are the textile structures that can sense stimuli, which may come from mechanical, thermal, electrical, or chemical sources. Textile strain sensors are smart textiles products in which the sensor’s resistance changes with applied strain. This study consists in the development of a textile strain sensor and its application on a Multifunctional Intelligent Elbow Brace (MIEB). The hand-knitted sensor was developed using knitting needles. The material used for this sensor was conductive yarn and lycra. The sensor developed was subjected to a stretch recovery test using a universal testing machine,, and the electrical resistance was measured using an electrical multimeter. The sensor developed has good sensing ability against cyclic loading and unloading at a 5%, 20%, 35% strain level. After testing, the sensor was stitched on an elbow brace to develop an MIEB. This study involved the best economical method for measuring the bowling angle of the player using this MIEB without any need for a biomechanical test, which is very expensive. This MIEB can also be used for rehabilitation purposes and for monitoring joint movement.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 1 (151); 22--30
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Validation of CSD advanced analysis of braced frame responses using subframe experimental investigations
Walidacja zaawansowanej analizy CSD ram stężonych z wykorzystaniem badań doświadczalnych podzespołów ramowych
Autorzy:
Barszcz, A. M.
Powiązania:
https://bibliotekanauki.pl/articles/230706.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rama stalowa
rama stężona
kątownik stężający
zachowanie pokrytyczne
analiza zaawansowana
degradacja sztywności ciągła
CSD
walidacja
model obliczeniowy
steel framework
braced frame
angle brace
post-limit brace behaviour
continuous stiffness degradation
advanced analysis
validation
computational model
Opis:
This paper deals with a Continuous Stiffness Degradation (CSD) version of advanced analysis of braced steel framing. It is based on the gradual stiffness degradation concept of frame and truss members. A novelty of the approach presented herein is related to the introduction of the bracing member response in the whole range of its behaviour in tension and compression, including the post-limit range. The validation of the proposed advanced analysis is performed for braced framework with rolled angle section braces. The validation of the brace force-deformation model has been presented in the author’s earlier publication. The basis for the presented CSD advanced analysis is briefly summarized and its difference with regard to the Refined Plastic Hinge (RPH) version of advanced analysis is emphasized. Experimental investigations dealing with tests on portal braced sub-frame specimens are referred to briefly. Results of the experimental investigations are presented in the form of a frame global response and they are used for the validation of the developed computational model.
Artykuł dotyczy analizy zaawansowanej – Continuous Stiffness Degradation (CSD) stalowych stężonych układów szkieletowych Pionowe stężenia ram składają się z elementów kratownicowych połączonych z elementami ramowymi. Technika modelowania oparta jest na koncepcji stopniowej degradacji sztywności elementów ramy i kratownicy. Nowatorstwo podejścia przedstawionego w niniejszym artykule związane jest z wprowadzeniem odpowiedzi elementu stężającego w całym zakresie jego zachowania przy rozciąganiu i ściskaniu, w tym w zakresie po osiągnięciu nośności na wyboczenie. Walidacja proponowanej zaawansowanej analizy jest przeprowadzana dla podsystemu ramowego składającego się z dwuteowników stanowiących ramę podstawową i jednego pręta stężającego z kątownika walcowanego, dla którego walidacja zależności siła-przemieszczenie została przedstawiona we wcześniejszej publikacji autora, cytowanej w artykule. Przedstawiono krótki przegląd propozycji analizy konstrukcji ram stalowych z uzasadnieniem wyboru zaawansowanej analizy CSD i określeniem jej odmienności w stosunku do zaawansowanej analizy udoskonalonego przegubu plastycznego (RPH). Zamieszczono wzory analityczne do wyznaczania współczynników redukcji sztywności i na wykresach pokazano przebieg ich zmienności przy obciążeniu momentem zginającym i siłą osiową w przypadku elementów ramowych, a w przypadku elementów kratowych tylko siłą osiową. Krótko omówiono program badań doświadczalnych stężonych podsystemów ram portalowych, który przedstawiany był szczegółowo we wcześniejszych publikacjach. Zamieszczono wyniki badań doświadczalnych w postaci ścieżek równowagi ram badanych doświadczalnie F–δF, z zaznaczonymi punktami granicznymi i charakterystycznymi, za które uznano osiągnięcie nośności wyboczeniowej przez pręt stężenia ramy. Wyniki te wykorzystano do walidacji opracowanego modelu obliczeniowego ram stężonych. Porównano przebieg ścieżek równowagi w zakresie sztywności i nośności układów oraz pokazano przebieg degradacji sztywności pręta stężenia i najbardziej obciążonego elementu rygla ramy. Porównano otrzymane analitycznie i numerycznie przebiegi zależności siła-odkształcenie oraz współczynnik redukcji sztywności w funkcji odkształcenia osiowego pręta stężenia. Wnioski sformułowano w odniesieniu do zastosowania zwalidowanego modelu w bezpośrednim projektowaniu stężonych stalowych konstrukcji szkieletowych.
Źródło:
Archives of Civil Engineering; 2018, 64, 2; 111-146
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the seismic performances of structures reinforced by self-centering buckling-restrained braces
Autorzy:
Jin, Yongxu
Xu, Man
Jia, Jie
Powiązania:
https://bibliotekanauki.pl/articles/27312160.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
budynek wysokościowy
stabilizator wyboczeniowy samocentrujący
wysięgnik
rozpraszanie energii
właściwości sejsmiczne
super-high raise building
self-centering buckling-restrained brace
outrigger truss
energy dissipation
seismic performance
Opis:
The self-centering buckling-restrained brace (SC-BRB) may achieve self-restoration for structures and, to a certain degree, diminish the substantial seismic residual deformation following rare earthquakes when compared to the usage of the conventional buckling-restrained brace (BRB). It may be possible to reduce the abrupt change in stiffness at the location of the strengthened stories and make the outrigger better at dissipating energy by improving the design of the energy-dissipation outrigger. This study compares the seismic performances of two types of energy-dissipation outriggers with BRB and SC-BRB web member designs during rare earthquakes so that the changes can be measured. The results show that using the SC-BRB web member design reduces the maximum inter-story drift ratio by an average of 7.68% and increases the average plastic-energy dissipation of the outrigger truss by 8.75%. The evaluation results showthat the SC-BRB outrigger truss structure has better structural regularity and energy-dissipation performance. It has the ability to efficiently regulate the structural seismic response and lessen primary-structure damage.
Źródło:
Archives of Civil Engineering; 2023, 69, 3; 645--663
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seismic performance evaluation of a proposed buckling-restrained brace for RC-MRFS
Autorzy:
Ebanesar, Arunraj
Cruze, Daniel
Noroozinejad Farsangi, Ehsan
Seenivasan, Vinscent Sam Jebadurai
Mohammad, Adil Dar
Abdul Rashid, Dar
Gladston, Hemalatha
Powiązania:
https://bibliotekanauki.pl/articles/396426.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
disasters seismic
disasters mitigation
buckling restrained brace
EPS
local buckling
load test
RC frame
OpenSees
katastrofy sejsmiczne
skutki katastrof
stabilizator zwalniający
wyboczenie
test obciążenia
Rama RC
Opis:
This paper presents a novel buckling-restrained brace (BRB) where the inner core is restrained by a concrete infilled Expanded Polystyrene Sheet (EPS) instead of the conventional concrete infilled tube section, to resist inner core buckling. It serves two purposes, firstly, the EPS is a ductile material, which is favourable in terms of seismic performance and, secondly, the outer construction material has better corrosion resistance. Thus, the life of the steel core can be prolonged. In this study, 6 BRB specimens were prepared, of which 3 BRB specimens were infilled with concrete and the remaining 3 BRB specimens with concrete and EPSs, in order to study their performance under cyclic loading. Three different core heights, all with the same core thickness, were adopted. The test results indicate that the load-carrying capacity of this novel BRB is higher than the conventional BRB. Further, the length of the steel tube also affects the strength of the seismic disaster mitigation system. Lastly, a numerical study on a single bay RC frame, with and without BRB subjected to time history analysis, was conducted to check the global performance of this novel system. It was found that the structural responses had substantially decreased.
Źródło:
Civil and Environmental Engineering Reports; 2019, 29, 3; 164-173
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies