Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "beam vibrations" wg kryterium: Temat


Tytuł:
Dynamic response of a simply supported viscoelastic beam of a fractional derivative type to a moving force load
Autorzy:
Freundlich, J.
Powiązania:
https://bibliotekanauki.pl/articles/279513.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
fractional viscoelasticity
moving loads
beam vibrations
transient dynamic analysis
Opis:
In the paper, the dynamic response of a simply supported viscoelastic beam of the fractional derivative type to a moving force load is studied. The Bernoulli-Euler beam with the fractional derivative viscoelastic Kelvin-Voigt material model is considered. The RiemannLiouville fractional derivative of the order 0 < α ¬ 1 is used. The forced-vibration solution of the beam is determined using the mode superposition method. A convolution integral of fractional Green’s function and forcing function is used to achieve the beam response. Green’s function is formulated by two terms. The first term describes damped vibrations around the drifting equilibrium position, while the second term describes the drift of the equilibrium position. The solution is obtained analytically whereas dynamic responses are calculated numerically. A comparison between the results obtained using the fractional and integer viscoelastic material models is performed. Next, the effects of the order of the fractional derivative and velocity of the moving force on the dynamic response of the beam are studied. In the analysed system, the effect of the term describing the drift of the equilibrium position on the beam deflection is negligible in comparison with the first term and therefore can be omitted. The calculated responses of the beam with the fractional material model are similar to those presented in works of other authors.
Źródło:
Journal of Theoretical and Applied Mechanics; 2016, 54, 4; 1433-1445
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model based predictive control of beam with magnetorheological fluid
Sterowanie predykcyjne drganiami belki z cieczą magnetoreologiczną
Autorzy:
Snamina, J.
Powiązania:
https://bibliotekanauki.pl/articles/368941.pdf
Data publikacji:
2011
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
drgania belki
ciecze magnetoreologiczne
sterowanie predykcyjne
beam vibrations
magnetorheological fluid
model predictive control
Opis:
In the work a model predictive control method was applied to control the beam vibrations. Model predictive control (MPC) is widely used as advanced control methodology. The considered beam consists of two outer layers made of aluminium and MR fluid layer in between. Activation of the MR fluid is realized by magnetic field. The analysis of strain and stress in three-layered beam were done. Then the equation of forced vibration of beam in the vicinity of the first resonances was derived. Based on this equation the simulation of MPC application was performed for the sinusoidal and random excitation.
W pracy zastosowano algorytm sterowania predykcyjnego przy wykorzystaniu modelu do redukcji drgań belki z cieczą magnetoreologiczną (MR). Rozważana belka składa się z dwóch zewnętrznych warstw wykonanych z aluminium oraz umieszczonej pomiędzy nimi warstwy cieczy MR. Zmiana własności cieczy MR następuje w wyniku wytworzenia przez elektromagnes pola magnetycznego obejmującego część belki. Przedstawiono analizę stanu odkształcenia i stanu naprężenia w poszczególnych warstwach belki. Wyprowadzono równania opisujące drgania w otoczeniu pierwszego rezonansu. Na podstawie zbudowanego modelu zaproponowano algorytm sterowania predykcyjnego, którego celem była redukcja drgań belki. Wykonano symulację drgań belki dla wymuszenia sinusoidalnego oraz stochastycznego.
Źródło:
Mechanics and Control; 2011, 30, 3; 164-169
2083-6759
2300-7079
Pojawia się w:
Mechanics and Control
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On nonexistence of global in time solution for a mixed problem for a nonlinear evolution equation with memory generalizing the Voigt-Kelvin rheological model
Autorzy:
Pukach, P.
Il'kiv, V.
Nytrebych, Z.
Vovk, M.
Powiązania:
https://bibliotekanauki.pl/articles/255696.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
boundary value problem
beam vibrations
nonlinear evolution equation
Voigt-Kelvin model
memory
blowup
Opis:
The paper deals with investigating of the first mixed problem for a fifth-order nonlinear evolutional equation which generalizes well known equation of the vibrations theory. We obtain sufficient conditions of nonexistence of a global solution in time variable.
Źródło:
Opuscula Mathematica; 2017, 37, 5; 735-753
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study on natural frequencies of Timoshenko beam with rapidly varying stiffness
Autorzy:
Świątek, M.
Domagalski, Ł.
Jędrysiak, J.
Powiązania:
https://bibliotekanauki.pl/articles/128104.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
beam vibrations
periodic beams
tolerance modelling
drgania belki
belka o strukturze periodycznej
modelowanie tolerancyjne
Opis:
Vibrations of Timoshenko beams with properties periodically varying along the axis are under consideration. The tolerance method of averaging differential operators with highly oscillating coefficients is applied to obtain the governing equations with constant coefficients. The dynamics of Timoshenko beam with the effect of the cell length is described. A asymptotic model is then constructed, which is further studied in analysis of the low order natural frequencies. The proposed model is able to describe dynamics of beams made of non-slender cells.
Źródło:
Vibrations in Physical Systems; 2016, 27; 369-376
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of high-speed camera measurements for determination of energy losses generated in a vibrating belt of CVT transmission
Autorzy:
Łatas, Waldemar
Kot, Adam
Powiązania:
https://bibliotekanauki.pl/articles/27311437.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
continuously variable transmission
moving beam vibrations
high-speed camera
power losses
straty mocy
przekładnia bezstopniowa
kamera szybka
drgania belki sprężystej
Opis:
The paper presents a proposition of the theoretical-experimental method of determination of power losses in the transversely vibrating rubber V-belt of continuously variable transmission. The article comprises the results of experimental tests conducted on a special test stand with a complete scooter drivetrain powered by a small two-stroke internal combustion engine. Such a configuration allows ensuring real CVT working conditions. A high-speed camera was used for the contactless measurement of belt vibrations and time-lapse image analysis was performed in dedicated software. An axially moving Euler–Bernoulli beam was assumed as the mathematical model. Longitudinal vibrations and nonlinear effects were omitted. Additionally, it was assumed that the belt material behaves according to the Kelvin–Voigt rheological model. Analysis of the damped free vibrations of the cantilever beam, made of the belt segment, allowed to determine the equivalent bending damping coefficient. The CVT power losses, due to bending in the rubber transmission belt, were obtained for the fixed working conditions after numerical calculations. The proposed methodology is a new approach in this research area, which allows to obtain results impossible to achieve with other measurement methods.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2023, 71, 5; art. no. e146238
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie funkcji radialnych w analizie drgań własnych konstrukcji pojazdów
Dynamic analysis of the vehicle structural components with radial based function
Autorzy:
Majkut, L.
Powiązania:
https://bibliotekanauki.pl/articles/249888.pdf
Data publikacji:
2013
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
funkcje radialne
drgania własne belki
drgania własne płyty
metoda kolokacyjna Kansy
radial functions
free vibrations of beam
free vibrations of plate
Kansa collocation method
Opis:
W pracy opisano bezsiarkową metodę kolokacyjną Kansy i jej wykorzystanie w analizie drgań własnych belek i płyt. W analizie wykorzystano funkcję wielokwadratową, opisano metodę doboru wartości parametru kształtu. Wszystkie wyniki porównano z wynikami analitycznymi lub symulacji Metodą Elementów Skończonych.
The work concerns the dynamic analysis of the beams and plates with the Radial Based Functions. The Kansa collocation method was used for determination eigenvalues of the beam and plate. All results were compared with analytical (for beam) or Finite Element Analysis (for plate) results. All results indicate that using of multiquadric (MQ) RBF provide a results with very high accuracy in comparison to analytical results in dynamic analysis of beam-like and plate-like structural components.
Źródło:
TTS Technika Transportu Szynowego; 2013, 10; 1077-1086, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical and numerical analysis of injection pump (stepped) shaft vibrations using Timoshenko theory
Autorzy:
Noga, Stanisław
Rejman, Edward
Bałon, Paweł
Kiełbasa, Bartłomiej
Smusz, Robert
Szostak, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/2105989.pdf
Data publikacji:
2022
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
modal analysis
natural vibrations
analytical solutions
Timoshenko beam theory
shaft vibrations
Opis:
The free transverse vibrations of shafts with complex geometry are studied using analytical methods and numerical simulations. A methodology is proposed for evaluating the results of a natural transverse vibration analysis as generated by finite element (FE) models of a shaft with compound geometry. The effectiveness of the suggested approach is tested using an arbitrarily chosen model of the injection pump shaft. The required analytical models of the transverse vibrations of stepped shafts are derived based on the Timoshenko thick beam theory. The separation of variables method is used to find the needed solutions to the free vibrations. The eigenvalue problem is formulated and solved by using the FE representation for the shaft and for each shaft-simplified model. The results for these models are discussed and compared. Additionally, the usefulness of the Myklestad–Prohl (MP) method in the field of preliminary analysis of transverse vibration of complex shaft systems is indicated. It is important to note that the solutions proposed in this paper could be useful for engineers dealing with the dynamics of various types of machine shafts with low values of operating speeds.
Źródło:
Acta Mechanica et Automatica; 2022, 16, 3; 215--224
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free and forced vibrations of Timoshenko beams described by single difference equation
Drgania własne i wymuszone belki Timoshenki opisane jednym równaniem różniczkowym
Autorzy:
Majkut, L.
Powiązania:
https://bibliotekanauki.pl/articles/280257.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
Timoshenko beam
Green function
boundary conditions
forced vibrations
Opis:
In the paper, a new approach to description of the Timoshenko beam free and forced vibrations by a single equation is proposed. The solution to such an equation is a function of vibration amplitudes. The boundary conditions corresponding to such a description of the beam vibration are also given. It was proved that the form of solution to the differential equation depends on the vibration frequency. The change of the solution form occurs when the frequency crosses a specific value omega = pierwiastek z GkA / (pI). The correctness of proposed description was checked through the analysis of free vibration frequencies and amplitudes of forced vibrations with different boundary conditions as well as comparison with the results of finite element analysis.
W pracy zaproponowano, nowe podejście do opisu drgań własnych i wymuszonych belki Timoshenki przez jedno równanie różniczkowe. Rozwiązaniem takiego równania jest funkcja amplitud drgań. Podano również równania opisujące warunki brzegowe odpowiednie do takiego opisu drgań. Udowodniono, że forma rozwiązania równania różniczkowego zależy od analizowanej częstości drgań. Zmiana formy rozwiązania zmienia się, gdy częstość osiąga określoną w pracy wartość omega = pierwiastek z GkA / (pI). Poprawność zaproponowanego opisu sprawdzono przez analizę częstości drgań własnych i amplitudy drgań wymuszonych belek z różnymi warunkami brzegowymi i porównaniem z wynikami otrzymanymi z analizy MES belki.
Źródło:
Journal of Theoretical and Applied Mechanics; 2009, 47, 1; 193-210
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control of Bending-Bending Coupled Vibrations of a rRotating Thin-Walled Composite Beam
Autorzy:
Latalski, J.
Bocheński, M.
Warmiński, J.
Powiązania:
https://bibliotekanauki.pl/articles/176850.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thin-walled beam
adaptive materials
feedback control
composite beam
coupled vibrations
structural tailoring
Opis:
The paper presents a study of a possible application of structure embedded piezoelectric actuators to enhance the performance of a rotating composite beam exhibiting the coupled flexural-flexural vibrations. The discussed transversal and lateral bending modal coupling results from the directional properties of the beam’s laminate and ply stacking distribution. The mathematical model of the beam is based on an assumption of cross-sectional non-deformability and it incorporates a number of non-classical effects. The final 1-D governing equations of an active composite beam include both orthotropic properties of the laminate and transversely isotropic properties of piezoelectric layers. The system’s control capabilities resulting from embedded Macro Fiber Composite piezoelectric actuators are represented by the boundary bending moment. To enhance the dynamic properties of the composite specimen under consideration a combination of linear proportional control strategies has been used. Comparison studies have been performed, including the impact on modal coupling magnitude and cross-over frequency shift.
Źródło:
Archives of Acoustics; 2014, 39, 4; 605-613
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies of the system: beam - variable mass element modeling overhead crane
Badania układu: belka – zmienna masa skupiona modelującego suwnicę
Autorzy:
Kutrowski, Ł.
Miara, M.
Powiązania:
https://bibliotekanauki.pl/articles/103463.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Tematy:
bridge crane
free vibrations
beam
suwnica
drgania swobodne
belka
Opis:
This paper presents the free vibration problem of beam with additionally attached mass element. The considered system can be treated as simplified to twodimensional model of the bridge crane. In this model the displacement of the hoist along the girder is analyzed and the longitudinal motion of the bridge crane does not occur. Based on the Hamilton’s principle, the boundary problem for this system has been formulated. On the basis of numerical simulations the influence of the position of the mass element (representing the hoist and mass of the load) on the free vibration frequencies of the system has been presented. The accepted mathematical model has been verified by the experimental studies.
W niniejszej pracy rozważano problem drgań swobodnych belki z dodatkowo zamocowanym elementem masowym. Układ ten może modelować konstrukcję suwnicy pomostowej, przy założeniu pewnych uproszczeń. Sprowadzono model obiektu rzeczywistego do zagadnienia dwuwymiarowego, w którym rozważa się możliwość przemieszczania wciągnika wzdłuż dźwigara, a ruch wzdłużny suwnicy nie występuje. Sformułowano zagadnienie brzegowe odnośnie do drgań układu na podstawie zasady Hamiltona. Przedstawiono symulacje numeryczne określające wpływ położenia elementu masowego (który reprezentuje układ wciągnika wraz z ładunkiem) na częstości drgań własnych układu. Przeprowadzono badania eksperymentalne odnośnie do drgań rozważanego układu, pozwalające na weryfikację przyjętego modelu matematycznego.
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Technika, Informatyka, Inżynieria Bezpieczeństwa; 2017, T. 5; 165-176
2300-5343
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Technika, Informatyka, Inżynieria Bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Observation Of Nonlinear Vibrations Using A Closed-Loop Vibration System
Autorzy:
de Barros, E.
d’Andrade Souto, C.
Mathias, M. H.
Powiązania:
https://bibliotekanauki.pl/articles/220744.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nonlinear vibrations
closed-loop vibration system
nonlinear structural dynamics
cantilever beam
Opis:
This paper presents experimental observation of nonlinear vibrations in the response of a flexible cantilever beam to transverse harmonic base excitations around its flexural mode frequencies. In the experimental setup, instead of manual control of the signal excitation frequency and amplitude, a closed-loop vibration system is used to keep the excitation amplitude constant during the frequency sweep and to increase confidence in the experimental results. The experimental results show the presence of the third mode in the response when varying the excitation frequency around the fourth mode. The frequency-response curves, response spectrum and Poincaré plots were used for characterization of nonlinear dynamic behaviour of the beam.
Źródło:
Metrology and Measurement Systems; 2015, 22, 4; 559-564
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of lateral vibrations of the axially loaded helical spring
Autorzy:
Michalczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/279466.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
helical spring vibrations
axially loaded spring
coil spring
Timoshenko equivalent beam
Opis:
It is shown in this paper that the proposed concept by Krużelecki and Życzkowski (1990) of the equivalent rod can be applied in calculations of natural lateral vibrations of springs and that the obtained results will be nearer FEM results than the standard model based on the Timoshenko equivalent beam. The model, created on this base, allows one to calculate natural frequencies of the clamped-clamped spring. It is also shown that models based on the equivalent beam concept, which are easier to apply than the models treating the spring as the spatially curved rod, have only a slightly smaller accuracy. It is also indicated that in the most common practice making of manufacturing end coils of springs, the natural frequencies differ significantly from the frequencies calculated by means of all tested methods. The performed simulations show that differences between the first and the second as well as the third and the fourth natural frequency of the spring are small and, therefore, the axially symmetrical equivalent beam model can be used without a large error. The diagram allowing one to determine whether the desired frequencies are lower or higher than the cut-off frequency is developed for the presented model.
Źródło:
Journal of Theoretical and Applied Mechanics; 2015, 53, 3; 745-755
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of strongly non-linear free vibrations of beams using perturbation method
Analiza silnie nieliniowych drgań własnych belek za pomocą metody perturbacji
Autorzy:
Lewandowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/396366.pdf
Data publikacji:
2005
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
belki
drgania nieliniowe
metoda elementów skończonych
metoda perturbacji
strongly non-linear vibrations
free vibrations
perturbation method
beam structures
Opis:
The possibilities of application of the perturbation method to the analysis of strongly non-linear free vibrations of beams are discussed. The geometrical non-linearity is taken into account. The finite element method is used for the description of the dynamic behaviour of beams. The first order perturbation equation is solved and the obtained solution is compared with the solution found with the help of the harmonic balance method which is widely used and applicable to the analysis of strongly non-linear dynamic systems. It was proved that both solutions are almost identical and differences are negligibly small. The numerical procedure enabling determination of backbone curves is also briefly described. Theoretical results are supplemented by a description of the results of typical calculations.
W pracy omawia się możliwości zastosowania metody perturbacji do analizy silnie nieliniowych drgań własnych belek. Uwzględnia się nieliniowości geometryczne. Użyto metody elementów skończonych do opisu dynamicznego zachowania belek. Podano rozwiązanie równania pierwszego przybliżenia metody perturbacji. Wykazano, że jest ono bardzo bliskie rozwiązaniu uzyskiwanemu za pomocą metody bilansu harmonicznych; metody powszechnie stosowanej do analizy układów silnie nieliniowych. Opisano procedurę numeryczną umożliwiającą wyznaczanie krzywych szkieletowych. Rozważania teoretyczne uzupełniono omówieniem wyników przykładowych obliczeń.
Źródło:
Civil and Environmental Engineering Reports; 2005, 1; 153-168
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical modelling of the high frequency vibrations during cold rolling process
Matematyczne modelowanie drgań wysokoczęstotliwościowych występujących podczas walcowania blach na zimno
Autorzy:
Świątoniowski, A.
Bar, O.
Powiązania:
https://bibliotekanauki.pl/articles/351698.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rolling stand
self-excited vibrations
high-frequency vibrations
Timoshenko beam mode
walcowanie blach
drgania samowzbudne
drgania wysokoczęstotliwościowe
model wiązki Timoshenko
Opis:
The study explores the model of high-frequency vibrations during the continuous rolling processes, the underlying assumption being that vibrations are self-excited. The effects of rolling stand and rolling process parameters on the nature and intensity of vibrations are investigated. The appearance of darkened streaks occurring on the metal sheet is explained. The results are compared with the data quoted in literature on the subject.
W pracy przedstawiono model opisujący drgania o wysokiej częstości, występujące w trakcie ciągłego walcowania blach. Model ten jest oparty na założeniu samowzbudności procesu. Zbadano wpływ parametrów klatki oraz procesu walcowania na charakter i intensywność drgań. Wyjaśniono również zjawisko powstawania na powierzchni blachy zaciemnionych pasków. Otrzymane wyniki porównano z wynikami badań.
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 4; 1085-1091
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transient dynamic analysis of functionally graded micro-beams considering small-scale effects
Autorzy:
Eshraghi, I.
Dag, S.
Powiązania:
https://bibliotekanauki.pl/articles/38627524.pdf
Data publikacji:
2021
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
boundary element method
functionally graded materials
Timoshenko micro-beam
vibrations
modified couple stress theory
Opis:
A domain-boundary element method, based on modified couple stress theory, is developed for transient dynamic analysis of functionally graded micro-beams. Incorporating static fundamental solutions as weight functions in weighted residual expressions, governing partial differential equations of motion are converted to a set of coupled integral equations. A system of ordinary differential equations in time is obtained by domain discretization and solved using the Houbolt time marching scheme. Developed procedures are verified through comparisons to the results available in the literature for micro- and macro-scale beams. Numerical results illustrate elastodynamic responses of graded micro-beams subjected to various loading types. It is shown that metal-rich micro-beams and those with a smaller length scale parameter ratio undergo higher displacements and are subjected to larger normal stresses.
Źródło:
Archives of Mechanics; 2021, 73, 4; 303-337
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies