Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "aviation engine" wg kryterium: Temat


Tytuł:
Advantages of compressor downstream air partial bleed and supplying it downstream of the turbine in a turbojet engine
Autorzy:
Ćwik, D.
Kowalski, M.
Stężycki, P.
Powiązania:
https://bibliotekanauki.pl/articles/247092.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
aviation engine operating parameters
jet engine designs
aviation engine air bleed
Opis:
The research article discusses the advantages of using compressor downstream air partial bleed and supplying it downstream of the turbine, which was applied in a prototype of a “bypass” turbojet engine. The objective of such a turbo engine structural solution was discussed along with its elements and principle of operation. Further part of the article determines the impact of such partial air bleed on the value of achieved basic operating parameters of the engine, i.e., unit thrust and unit power consumption. The presented attempt to compare these parameters with the parameters achieved for a turbojet, single flow engine is very important; in the first case without air bleed, and in the second, with air bleed to the environment. Further sections of the article compared these parameters relative to a turbojet, turbofan engine with a jet mixer. Such comparisons enabled to determine the actual benefits of using compressor downstream air partial bleed and supplying it downstream of the turbine, which may constitute an intermediate solution between single flow turbine engines and turbo fan engines. Wide possibilities for the application of such structural solutions were shown, which was summarised in the conclusions.
Źródło:
Journal of KONES; 2018, 25, 4; 501-508
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the impact of oil presence in the aviation fuel on particle size distribution
Autorzy:
Jasiński, R.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/198385.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
aviation engine
particles
fuel additives
silnik lotniczy
cząstki
dodatki do paliw
Opis:
Emissions from aircraft engines represent a highly complex and important issue, which is related to the risk to human health. Particles emitted in urban areas and in the vicinity of airports affect air quality and have a particularly negative impact on airport workers. The development of measurement techniques and the methodology for evaluating exhaust emissions have allowed for the elaboration of appropriate procedures for the certification of aircraft and the enhancement of existing standards. Particulate matter emissions depend, among other things, on the composition of the fuel used and its additives. Some aircraft engine designs require a fuel additive in the form of oil, which ensures the proper operation of the fuel supply system. This article presents the results of studies conducted on jet engines powered by clean aviation fuel and fuel with the addition of oil. The aim of the study was to evaluate the effect of the addition of oil on the size distribution and concentration of emitted particles. It was found that, for small values of thrust, oil additive increases the concentration of particles. With an increase in the thrust force, the reduction of particles concentration was recorded in the case of the engine powered by fuel with oil additive. There was no significant effect of oil additive on the size distribution of emitted particles.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2017, 94; 57-64
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A sampling method based on improved firefly algorithm for profile measurement of aviation engine blade
Autorzy:
Huang, Zhi
Zhao, Liao
Li, Kai
Wang, Hongyan
Zhou, Tao
Powiązania:
https://bibliotekanauki.pl/articles/221479.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aviation engine blade
coordinate measurement machine
profile measurement
improved firefly algorithm
Opis:
Coordinate Measurement Machines (CMMs) have been extensively used in inspecting mechanical parts with higher accuracy. In order to enhance the efficiency and precision of the measurement of aviation engine blades, a sampling method of profile measurement of aviation engine blade based on the firefly algorithm is researched. Then, by comparing with the equal arc-length sampling algorithm (EAS) and the equi-parametric sampling algorithm (EPS) in one simulation, the proposed sampling algorithm shows its better sampling quality than the other two algorithms. Finally, the effectiveness of the algorithm is verified by an experimental example of blade profile. Both simulated and experimental results show that the method proposed in this paper can ensure the measurement accuracy by measuring a smaller number of points.
Źródło:
Metrology and Measurement Systems; 2019, 26, 4; 757-771
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aviation piston engines : flight parameter analysis
Autorzy:
Boguszewicz, P.
Glowacki, P.
Powiązania:
https://bibliotekanauki.pl/articles/245160.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
aviation piston engine
on-condition maintenance
engine flight parameter
Opis:
A program and tools enabling general aviation operators in our country the exploitation of the piston engines oncondition has been developed in the Institute of Aviation. Apart from the existing and strictly supervised engine manuals tasks, the program introduces, among other things, new maintenance mandatory activities like engine parameter monitoring during cruise and climb and a way of assignation diagnostic tolerance limits for them. That has never been performed in the aviation piston engines maintenance practice. In order to improve such analysis a flight data recorder (FDR) EDM 900 has been installed on the DA20- C1 „Katana” aircraft equipped with IO-240-B engine, which will allow elimination of the pilot's read errors and examination of the changes in the parameters during the entire flight. This will enable estimating if at a certain time of the flight a specified engine parameter is not exceeding the permissible values. Parameters from cruise have to be recorded in the similar range of the engine rpm’s. The parameters are oil pressure, oil temperature, cylinder head temperature, EGT, fuel flow, outside air temperature, rpm and altitude. Lower and upper acceptable limit values should be set, in which they can be contained throughout engine life. Engineers should also observe the trend of their changes. This article shows results of the aviation piston engine parameters analysis taken from FDR for ground runs, take-offs and cruise flight phases.
Źródło:
Journal of KONES; 2016, 23, 3; 41-48
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-similarity of Operating Modes of Aviation Engine with the Use of Wireless Data Transmission
Autorzy:
Tovkach, Serhii Serhiiovych
Powiązania:
https://bibliotekanauki.pl/articles/103125.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
aviation engine
multifractal wavelet models
wireless
self-similarity
traffic
silnik lotniczy
wielofrakcyjne modele falkowe
ruch uliczny
bezprzewodowa transmisja danych
Opis:
The implementation of wireless data transmission technology and, in turn, increasing the efficiency of the functioning of the automatic control systems of the aviation gas turbine engines by determining their self-similarity of operating modes will ensure the mobility of control and diagnostics by the nodes of the gas turbine engine (GTE), the definition of resources and their use, as well as the reduction of the cost of their maintenance. The paper deals with the issue of the appropriate location of the wireless module operation of the electronic control system within the fractal and multifractal wavelet models of the individual components of the telecommunication IEEE 802.15.4 traffic and the transmission of information through the switch node of the packet switching, which allows conducting the research with the methods involving choice of parameters of telecommunication networks under the conditions of precisely and approximate given input data. The studies on the influence of mono and multifractality of network traffic for the characteristics of queuing on an overloaded mobile communication system server were conducted and the recommendations for IEEE 802.15.4 communication channels electronic turbo propeller fan engine control system was proposed.
Źródło:
Advances in Science and Technology. Research Journal; 2019, 13, 2; 176-185
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Usage of Cold Forcing Method for a Gas Turbine Engine of Supersonic Transport
Autorzy:
Gutakovskis, Viktors
Gudakovskis, Vladimirs
Blumbergs, Ilmārs
Sarma, Elina
Powiązania:
https://bibliotekanauki.pl/articles/2201886.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
aviation
GTE
gas turbine engine
supersonic
plane
aircraft
Opis:
The article discusses the current state of development of supersonic transport, analyses the main limitation of the use of gas turbine engines when flying at high supersonic flight speeds, proposes a method for expanding the range of GTE limitations in these flight modes of the aircraft, using cold forcing of the engine, conducts an analytical study of the effectiveness of this approach, proposes one of the possible devices for the implementation of cold forcing, the efficiency of an engine with cold forcing is shown, which may be of significant interest for the application of cold forcing methods in gas turbine engines of supersonic transport.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 1; 267--273
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method of preliminary evaluation of biocomponents influence on the process of biofuels combustion in aviation turbine engines
Autorzy:
Kaźmierczak, U.
Kulczycki, A.
Powiązania:
https://bibliotekanauki.pl/articles/247673.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
fuel
aviation turbine engines
biofuel
synthetic hydrocarbons
engine test
Opis:
The aim of this article is presentation of the new method of preliminary evaluation of biocomponents influence on the process of biofuels combustion in aviation turbine engines. This method is based on the tests of evaluated biofuels on engine stand MiniJetRig equipped with small turbine engine. The idea of this new method is to compare the combustion process of evaluated biofuel with the combustion of reference fuels. The reference fuel used in presented research was mineral Jet A1. Two compositions of pure hydrocarbons were blended with Jet A1 fuel and tested using MiniJetRig. The main criterion of combustion process assessment was CO concentration in exhaust gases. As the final criterion of evaluated biofuel the ΔCO = [COWx – COJet] was adopted, where COWx – the concentration of CO in exhaust gases emitted during combustion of evaluated fuel and COJet – the concentration of CO in exhaust gases emitted during combustion of Jet A1 fuel. This method was preliminary verified using HEFA biofuel previously accepted for aviation application. The obtained results qualify this biofuel as similar to Jet A1 ones – the DCO was within limits –30 – +20. The presented method needs further research, using much more evaluated fuels, to confirm their usefulness for laboratory pre-selection of new biofuels.
Źródło:
Journal of KONES; 2017, 24, 4; 83-90
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Jet aircraft data acquisition systems
Autorzy:
Rojewski, A.
Bartoszewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/243996.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
aircraft
safety
jet engine
aviation
samolot
bezpieczeństwo
silnik odrzutowy
lotnictwo
Opis:
The article presents systems, which record parameters of flight in modern aircraft F-16, which was delivered to Polish Airforce in 2006. With the current level of technical development of the aviation industry, data acquisition systems are an important element of all aircrafts. These systems are responsible for the flight safety, allow reading and storing the most important flight parameters, and combined with digital control and safety systems allow to counteract dangerous situations, which especially can happen often in the case of military aircraft such as the F-16 due to their combat purpose. Systems records basics parameters of plane and engine, as specific fuel consumption or height of flight provides video and audio recording, and aerial combat assistance. These systems record even failures of a braking system during landing. Thanks to modern technology, and devices like those described in this article, F-16 is one of the best fighters in the world. The amount of data provided by analogue and digital sensors is so large that it requires the partitioning of parameters and use of several basic recorders of the entire system is the unit called DAU, or Data Acquisition Unit, which records the most important flight parameters, such as flight time, engine speed, or altitude.
Źródło:
Journal of KONES; 2018, 25, 1; 333-338
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exhaust emissions of jet engines powered by biofuel
Autorzy:
Merkisz, Jerzy
Jasiński, Remigiusz
Łęgowik, Anna
Olejnik, Aleksander
Powiązania:
https://bibliotekanauki.pl/articles/2098181.pdf
Data publikacji:
2021
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
aviation
exhaust emissions
jet engine
biofuel
lotnictwo
emisja spalin
silnik odrzutowy
biopaliwo
Opis:
Biofuel use is one of the basic strategies to reduce the negative impact of aviation on the environment. Over the past two decades, a number of biofuels produced from plants, lubricants and maintenance products have been developed and introduced. New fuels must have specific physicochemical parameters and meet stringent standards. his article presents a comparative analysis of the exhaust emissions measurement results from jet engines powered by traditional aviation kerosene and its blends with ATJ (Alcohol to Jet) biofuel. The concentrations of carbon dioxide, carbon monoxide and hydrocarbons were measured. Measurements were conducted in laboratory conditions for various engine load values. Based on the analysis, it was found that the use of biofuel increases the concentration of carbon monoxide and hydrocarbons in the exhaust gas relative to aviation kerosene. The use of biofuel did not result in an increase in fuel consumption and related carbon dioxide emissions. Based on the conducted research, it was found that biofuel use did not affect the ecological properties of the engine significantly. In addition, a correlation analysis of the measurement results from both engines was carried out.
Źródło:
Transport Problems; 2021, 16, 4; 199--206
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane właściwości mieszanin oleju rzepakowego z benzyną lotniczą
Selected properties of rapeseed oil and aviation gasoline blends
Autorzy:
Wojdalski, J.
Klimkiewicz, M.
Dróżdż, B.
Mruk, R.
Słoma, J.
Powiązania:
https://bibliotekanauki.pl/articles/288193.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
olej rzepakowy
benzyna lotnicza
paliwo silnikowe
rapeseed oil
aviation gasoline
engine fuels
Opis:
Przedstawiono wyniki badań, których celem było określenie wpływu dodatku benzyny lotniczej Jet-A1 do oleju rzepakowego na wybrane właściwości mieszanin, mogących mieć zastosowanie jako paliwo silnikowe. Porównano właściwości składników oraz mieszanin składających się z oleju rzepakowego z benzyną lotniczą Jet-A1 w ilościach 10%, 20% i 30% (v/v). Zbadano przebiegi destylacji oraz gęstość i lepkość poszczególnych produktów. Zwiększenie udziału benzyny lotniczej Jet-A1 do 30% w mieszaninie z olejem rzepakowym wpłynęło na zmniejszenie lepkości kinematycznej produktu z 34,0mm2·s-1 do 15,5mm2·s-1 oraz gęstości z 921,0kg·m-3 do 890,9kg·m-3.
The paper presents the results of a study aimed at determining the effect of rapeseed oil enhanced with aviation gasoline Jet-A1 on the properties of engine fuel mixtures. The properties of ingredients and mixtures composed of rapeseed oil and aviation gasoline Jet-A1 in the amount of 10%, 20% and 30% (v/v) were compared. The distillation process was analyzed, and the density and viscosity of each product were determined. The addition of 30% aviation gasoline Jet-A1 to the mixture with rapeseed oil reduced viscosity from 34.0mm2·s-1 to 15.6mm2·s-1 and density from 921.0kg·m-3 to 890.9kg·m-3.
Źródło:
Inżynieria Rolnicza; 2013, R. 17, nr 2, t. 1, 2, t. 1; 349-358
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies