Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "analiza sejsmiczna" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Influence of the mesh structure of geodesic domes on their seismic response in applied directions
Wpływ siatki struktur kopuł geodezyjnych na ich odpowiedź sejsmiczną na zadanych kierunkach
Autorzy:
Bysiec, Dominika
Maleska, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/27312144.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
analiza numeryczna
analiza sejsmiczna
drganie wymuszone
konstrukcja lekka
kopuła geodezyjna
forced vibration
geodesic dome
lightweight structure
numerical analysis
seismic analysis
Opis:
The paper presents the determination of the impact of earthquakes of varying intensity on the structure of geodesic domes. The structures of the analyzed domes were designed on the basis of the regular octahedron according to two different methods of creating their topology. The use of four seismic records of different intensity and duration of the record made it possible to subject 8 models to numerical analysis. The designed spatial structures are domes with a steel cross-section, thanks to which they are undoubtedly characterized by their lightness and the possibility of covering very large areas, without the need to use internal supports. Designing steel domes is currently a challenge for constructors, as well as architect, who take into account their aesthetic considerations. The paper presents the seismic response of geodesic domes in applied different directions (two horizontal “X” and “Y” and one vertical “Z”), using the Time History method. The values of forced vibrations and recording intensity were shown, and on this basis, an attempt was made to determine which seismic record may be more unfavorable for the designed geodesic domes created according to two different methods of shaping the topology of their structures. For this purpose, the FFT (Fast Fourier Transform) method was used. The maximum accelerations and displacements of the structures were also analyzed. The conducted analysis shows the influence of seismic excitations on geodetic dome structures, depending on the applied method (method 1 and 2) of shaping their topology. This paper will undoubtedly be useful in designing a geodesic dome structure in a seismic area. In addition, this analysis can be helpful in assessing the effects of an incidental earthquake.
Praca dotyczy określenia wpływu trzęsienia ziemi o różnej intensywności na konstrukcję kopuł geodezyjnych. Struktury analizowanych kopuł, których podstawą kształtowania był ośmiościan foremny, zaprojektowane zostały według dwóch różnych metod tworzenia topologii tego typu konstrukcji. Wykorzystanie czterech zapisów sejsmicznych o różnej intensywności i o zróżnicowanym czasie trwania zapisu umożliwiło poddanie analizie numerycznej 8 modeli. Zaprojektowane przestrzenne struktury to kopuły o przekroju stalowym, dzięki czemu niewątpliwie odznaczają się swoją lekkością i możliwością przekrycia bardzo dużych powierzchni, bez konieczności zastosowania podpór wewnętrznych. Zaprojektowanie stalowych kopuł jest obecnie wyzwaniem zarówno dla konstruktorów, jak i architektów, którzy kierują się również względami estetycznymi. W pracy przedstawiono odpowiedź sejsmiczną kopuł geodezyjnych w zastosowanych różnych kierunkach (dwa poziome „X” i „Y” oraz jeden pionowy „Z”) przy użyciu metody Time History. Wykazano wartości drgań wymuszonych i intensywności zapisu i na tej podstawie podjęto próbę określenia, który zapis sejsmiczny może być bardziej niekorzystny dla badanych kopuł geodezyjnych utworzonych według dwóch różnych metod kształtowania topologii ich struktur. W tym celu posłużono się metodą FFT (Fast Fourier Transform). Przeanalizowano również maksymalne przyspieszenia i przemieszczenia konstrukcji. Przeprowadzona analiza pokazuje wpływ wstrząsów sejsmicznych na konstrukcje kopuł geodezyjnych, w zależności od zastosowanej metody (metoda 1 i 2) kształtowania ich topologii. Praca ta będzie niewątpliwie przydatna przy projektowaniu struktury kopuły geodezyjnej na obszarze sejsmicznym. Ponadto analiza ta może być pomocna przy ocenie skutków spowodowanych przypadkowym trzęsieniem ziemi.
Źródło:
Archives of Civil Engineering; 2023, 69, 3; 65--78
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczenie modalnej odpowiedzi konstrukcji na wstrząsy z uwzględnieniem kierunków ich działania
Designation of structure modal response for earthquake motions with consideration of their directionality
Autorzy:
Górnik, G.
Powiązania:
https://bibliotekanauki.pl/articles/105054.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
analiza sejsmiczna
analiza modalna
analiza spektralna
kombinacje kwadratowe
wstrząsy wielokierunkowe
korelacja międzymodalna
seismic analysis
spectral analysis
quadratic combinations
multicomponent seismic motions
correlation of effects
Opis:
W referacie przedstawiono sposoby uwzględniania odpowiedzi modalnej konstrukcji na działanie wstrząsów sejsmicznych posługując się spektralną analizą modalną. Omówiono metodę spektrum odpowiedzi uwzględniając najważniejsze zalecenia dotyczące jej stosowania. Opisano najczęściej stosowaną metodę sumowania odpowiedzi modalnej – CQC oraz jej modyfikacje – metody CQC3 i GCQC3, które pozwalają uwzględnienie kierunków działania wstrząsu. Odniesiono się również do przepisów zawartych w normie Eurocode 8 dotyczących wytycznych sumowania odpowiedzi z różnych kierunków. Na przykładach numerycznych dokonano porównania zaprezentowanych metod z użyciem spektralnej analizy modalnej oraz obliczono odpowiedź wybranych sił przekrojowych.
The paper presents calculation methods of modal response during the earthquake motions and some remarks of dynamic and spectral analysis. The most often methods used to combine effects of natural vibration modes and earthquake directions are considered. Authors presented well known Complete Quadratic Combination (CQC) and its newest modifications CQC3 for planar variability and General Complete Quadratic Combination (GCQC3) for spatial variability of earthquake directions. All calculation approaches are supported with two examples of steel frame structures submitted to earthquake effects according to Eurocode 8.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 1; 279-296
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical study on dynamic response of cantilever flexible retaining wall
Autorzy:
Yang, Xiuzhu
Liu, Xinyuan
Zhao, Shuang
Yu, Jun
Powiązania:
https://bibliotekanauki.pl/articles/27312122.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
analiza sejsmiczna
ścianka wspornikowa
ściana elastyczna
ściana oporowa
mechanika falowa
odpowiedź dynamiczna
rozwiązanie analityczne
seismic analysis
cantilever wall
flexible wall
retaining wall
wave mechanics
dynamic response
analytic solution
Opis:
Based on wave mechanics theory, the dynamic response characteristics of cantilever flexible wall in two-dimensional site are analyzed. The partial derivative of the vibration equation of soil layer is obtained, and the general solution of the volume strain is obtained by the separation of variables method. The obtained solution is substituted back to the soil layer vibration equation to obtain the displacement vibration general solution. Combined with the soil-wall boundary condition and the orthogonality of the trigonometric function, the definite solution of the vibration equation is obtained. The correctness of the solution is verified by comparing the obtained solution with the existing simplified solution and the solution of rigid retaining wall, and the applicable conditions of each simplified solution are pointed out. Through parameter analysis, it is shown that when the excitation frequency is low, the earth pressure on the wall is greatly affected by the soil near the wall. When the excitation frequency is high, the influence of the far-field soil on the earth pressure of the wall gradually increases. The relative stiffness of the wall, the excitation frequency and the soil layer damping factor have a significant effect on the dynamic response of the flexible retaining wall.
Źródło:
Archives of Civil Engineering; 2023, 69, 2; 435--453
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Określenie czynników wpływających na zagrożenie tąpaniami w rejonie eksploatowanej ściany poprzez jednoczesne wykorzystanie tomografii sejsmicznej i analizy mechanizmów ognisk wstrząsów
Identification of factors stimulating rock-burst hazards in the longwall area by simultaneous application of seismic tomography and analysis of tremor source mechanisms
Autorzy:
Wojtecki, Ł.
Dzik, G.
Powiązania:
https://bibliotekanauki.pl/articles/186968.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technik Innowacyjnych EMAG
Tematy:
tąpania
zagrożenie tąpaniami
tomografia sejsmiczna
ogniska wstrząsów
analiza
rock-burst hazards
seismic tomography
tremors
analysis
Opis:
W artykule przedstawiono wyniki tomografii sejsmicznej wykonanej na wybiegu ściany w pokładzie 510 w jednej z kopalń w Górnośląskim Zagłębiu Węglowym oraz analizę mechanizmu ognisk średnio- i wysokoenergetycznych wstrząsów górotworu, jakie wystąpiły w rejonie tej ściany bezpośrednio po przeprowadzonych badaniach geotomograficznych. Uzyskany rozkład naprężeń w górotworze na wybiegu ściany oraz wyniki przeprowadzonej analizy mechanizmów ognisk wstrząsów skorelowano ze sobą oraz z warunkami górniczo-geologicznymi. Na podstawie przeprowadzonych badań określono czynniki mające dominujący wpływ na kształtowanie się zagrożenia tąpaniami w rejonie eksploatowanej ściany w przyjętym przedziale czasowym. Jednoczesne wykorzystanie tomografii sejsmicznej i analizy mechanizmów ognisk wstrząsów umożliwia pełniejsze rozpoznanie zagrożenia tąpaniowego w trakcie prowadzonej eksploatacji.
The article presents the results of seismic tomography conducted ahead of the longwall front in coal bed 510, in a mine of the Upper Silesian Coal Basin, along with the analysis of medium- and high-energy tremors of the rock mass which occurred in the longwall area directly after the geo-tomographic research. The achieved stress distribution in the rock mass ahead of the longwall front, as well as the results of the tremor source mechanisms were correlated with each other and with the mining and geological conditions. Based on the conducted research, the factors were identified which impact rock-burst hazards in the area of the exploited longwall in the assumed period of time. Simultaneous use of seismic tomography and the analysis of tremor source mechanisms enables better identification of rock-burst hazards during the longwall exploitation.
Źródło:
Mechanizacja i Automatyzacja Górnictwa; 2013, R. 51, nr 9, 9; 23-30
0208-7448
Pojawia się w:
Mechanizacja i Automatyzacja Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary evaluation of seismic performance of engineering structures with perform 3D
Autorzy:
Li, Dongmei
Powiązania:
https://bibliotekanauki.pl/articles/230293.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
PERFORM 3D
analiza elasto-plastyczna
wydajność sejsmiczna
kąt przemieszczenia
kondygnacja
elastoplastic analysis
seismic performance
storey
displacement angle
Opis:
This study analyzed the role of PERFORM 3D in the preliminary evaluation of seismic performance of engineering structures. Firstly, PERFORM 3D was briefly introduced, and its material constitutive model and basic model were analyzed. Then, taking a high-rise building project in Yulin, Shaanxi, China, as an example, PERFORM 3D was used to evaluate its seismic performance. After establishing the engineering model, five seismic waves were selected for simulation. The results showed that the maximum values of X-axis inter-story displacement angle and Y-axis displacement angle were 1/500 and 1/360 respectively, which were far less than the standard limit; the overall energy dissipation was good, the damping was small, the overall deformation was good, and the seismic performance was also good. In conclusion, PERFORM 3D has a good performance in the preliminary evaluation of seismic performance of engineering, and it is worth further promotion and application.
Źródło:
Archives of Civil Engineering; 2019, 65, 4; 189-201
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Viscoelastic Material as Energy Dissipater Viscoelastic Damper for Building Structures to Mitigate the Seismic Vibration
Autorzy:
Sarwar, Waseem
Powiązania:
https://bibliotekanauki.pl/articles/396698.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
viscoelastic material
viscoelastic damper
dynamic mechanical analysis
dynamic properties
seismic control
materiał lepkosprężysty
tłumik lepkosprężysty
dynamiczna analiza mechaniczna
właściwości dynamiczne
kontrola sejsmiczna
Opis:
The supplemental energy dissipation system is a practical approach to attenuate the structural response under extreme loading. Viscoelastic damping used to reinforce the structure against the seismic vibration, Viscoelastic material (VEM) most commonly used in viscoelastic dampers (VEDs). In this paper, dynamic mechanical analysis (DMA) approach is used to investigate the performance index of VEM. It is demonstrated that the performance index, such as storage modulus, loss modulus, and loss factor decrease noticeably as the temperature increases, which reflects the low stiffness at high temperature. Excitation frequency also influenced the performance index, and the reaction has correspondence to temperature. As the temperature increases, the VEM dynamic properties decreases, which represents the rubbery region, and it is found that higher to low-temperature dynamic properties increases, which the glassy region is. DMA is a particularly flexible approach, and it characterizes the properties of VEM simultaneously at various conditions.
Źródło:
Civil and Environmental Engineering Reports; 2019, 29, 2; 41-49
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O wykształceniu strukturalnym Górnośląskiego Zagłębia Węglowego - urywki dyskusji bez zakończenia
On structural features of the Upper Silesian Coal Basin: Scraps of discussion with no end
Autorzy:
Teper, L.
Powiązania:
https://bibliotekanauki.pl/articles/2074613.pdf
Data publikacji:
2008
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
Górnośląskie Zagłębie Węglowe
strefy uskokowe
analiza strukturalna
tektonika sejsmiczna
tectonics
Upper Silesian Coal Basin
fractality of fault network
fault size distributions
fundamental faults
seismotectonics
Opis:
Concepts of Adam Kotas, who inferred that structure of the Carboniferous sedimentary complex was produced by primary faulting in the crystalline basement of the Upper Silesian Coal Basin, have been further supported by results from fractal, structural and seismotectonic analyses of the basin features. Findings revealed selfsimilarity of the fault network strongly controlled by fundamental dislocations. Geometrical attributes of fold arrays and evidences of interlayer slip, together with focal mechanism solutions of mine tremors, helped to determine location, kinematics and dynamics of the principal deep-seated faults.
Źródło:
Przegląd Geologiczny; 2008, 56, 6; 481-481
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geological and seismic investigation of former lignite mining area in Zielona Góra – two case studies
Badania geologiczno–inżynierskie oraz sejsmiczne na obszarach dawnego górnictwa węgla brunatnego – dwa przypadki z terenu Zielonej Góry
Autorzy:
Gontaszewska-Piekarz, A.
Kłosiński, J.
Powiązania:
https://bibliotekanauki.pl/articles/105324.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
lignite mining
Zielona Góra
seismic investigation
multichannel analysis
surface waves
MASW
seismic estimation SPT
górnictwo węgla brunatnego
badania sejsmiczne
wielokanałowa analiza fal powierzchniowych
estymacja sejsmiczna SPT
Opis:
The article presents two case studies of investigation carried out on plots of land, intended for multi-family residential development, lying on a former lignite mining area in Zielona Gora. It was underground mining, operating in the years 1840- 1948. Lignite deposits were extracted with the room and pillar method, i.e. with an overlayer collapse, causing deformations on the surface of the ground. In the first case study, there was no detailed mining data. In order to identify the geological structure under the planned seven-floor multi-family building, seismic surveys were performed with the technique of multichannel analysis of surface waves (MASW). Three seismic profiles were performed. They revealed the presence of several zones where S-waves had smaller velocity values. In order to verify whether the zones with the smaller values of velocity correspond to e.g. lower soil density resulting from collapsed exploitation room, some drillings were undertaken to the depth indicated in geophysical investigation. Additionally, the CPT and dynamic probing were also performed. The data obtained allowed to determine the soil parameters necessary for the safe design and foundation of the building. In the second case study, a historical mining map with the marked location of the shaft and the main galleries was used. Formerly, geological and engineering documentation for construction works had been prepared, based on 30-meter drillings and soundings with a heavy probe. The mining maps and the contemporary maps were mapped one on another carefully and accurately, calibrated with historic buildings. Thus, the accuracy of 5 m was obtained. Additionally, investigation with the MASW technique was performed. Ten seismic profiles were performed, and then verified by drillings. Also, dynamic probing in the vicinity of the expected location of the shaft was performed. Neither the MASW investigation nor the dynamic probing did not reveal any alterations in the soil condition, which would suggest the presence of the properly liquidated shaft. Thus, based exclusively on the cartographic material, the area comprising the liquidated and backfilled shaft was established. The area was excluded from the plans for the intended building erection.
Artykuł przedstawia badania, jakie przeprowadzono na dwóch przykładowych działkach przeznaczonych dla zabudowy wielorodzinnej leżących na terenie dawnego górnictwa węgla brunatnego w Zielonej Górze. Było to górnictwo podziemne, działające w latach 1840-1948. Węgiel 326 A. Gontaszewska-Piekarz, J. Kłosiński brunatny eksploatowany był metodą filarowo – komorową, na zawał, powodując powstawania na powierzchni deformacji terenu. Dla niektórych fragmentów miasta zachowały się mapy górnicze. W pierwszym przypadku brak było szczegółowych danych górniczych. W celu rozpoznania budowy geologicznej pod projektowany budynek wielorodzinny, 7-kondygnacyjny wykonano geofizyczne badania sejsmiczne techniką wielokanałowej analizy fal powierzchniowych MASW. Wykonano 3 profile sejsmiczne. Wykazały one kilka niewielkich stref cechujących się niższymi wartościami prędkości fal sejsmicznych poprzecznych S. W celu weryfikacji, czy strefy obniżeń prędkości związane są np. z obniżonym zagęszczeniem gruntu wskutek zawału stropu nad komorami eksploatacyjnymi wykonano odwierty do głębokości wskazanej badaniami geofizycznymi. Wykonano także sondowania sondą CPTu oraz sondowania dynamiczne. Uzyskane dane pozwoliły na określenie parametrów podłoża koniecznych do bezpiecznego zaprojektowania posadowienia budynku. W drugim przypadku dostępna była mapa górnicza z lokalizacją szybu oraz głównych chodników.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 2/I; 311-326
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigating the performance of isolation systems in improving the seismic behavior of urban bridges. A case study on the Hesarak Bridge
Autorzy:
Edalati, Ali Akbar
Tahghighi, Hossein
Powiązania:
https://bibliotekanauki.pl/articles/230372.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
most żelbetowy
odpowiedź sejsmiczna
łożysko gumowe elastomerowe
łożysko gumowe ołowiowe
historia czasu
analiza
reinforced concrete bridge
seismic response
elastomeric rubber bearing
ERB
lead rubber bearing
LRB
time history
analysis
Opis:
This paper investigates the influence of isolation systems on the seismic behavior of urban reinforce concrete bridge. The performance of the Hesarak Bridge constructed in Karaj city, Iran with two isolation systems; i.e. the existing elastomeric rubber bearing (ERB) and a proposed lead rubber bearing (LRB) is discussed. The numerical model was implemented in the well-known FEM software CSIBridge. The isolated bridge has been analyzed using nonlinear time history analysis method with seven pairs of earthquake records and the results are compared for the two isolation systems. The LRB isolators are shown to have superior seismic performance in comparison with the existing ERB systems based on the response evaluation including force on the isolator, pier base shear, deck acceleration, bending moment, pier displacement, and energy dissipation.
Źródło:
Archives of Civil Engineering; 2019, 65, 4; 155-175
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Płytkie badania geofizyczne z wykorzystaniem sejsmiki inżynierskiej oraz tomografii elektrooporowej
Near surface geophysical prospecting using engineering seismics and electric resistivity tomography
Autorzy:
Ostrowski, S.
Pacanowski, G.
Powiązania:
https://bibliotekanauki.pl/articles/2063066.pdf
Data publikacji:
2011
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
sejsmiczne profilowanie refrakcyjne
prześwietlanie sejsmiczne
sejsmiczna tomografia refrakcyjna
wielokanałowa analiza fal powierzchniowych
tomografia elektrooporowa
seismic reflection profiling
seismic tomography
seismic refraction tomography
electric resistivity tomography
multi-channel analysis of near-surface waves
Opis:
W artykule wymieniono i omówiono kilka przykładów badań geofizycznych (i ich wyników) wykonanych przez Przedsiębiorstwo Badań Geofizycznych Sp. z o.o., dotyczących płytkiej prospekcji ośrodka geologicznego. Przedstawione przykłady odnoszą się do badań, w których wykorzystano najnowsze technologie z dziedziny sejsmiki inżynierskiej i tomografii elektrooporowej. Omówiono podstawowe aspekty praktyczne w odniesieniu do potencjalnych możliwości zastosowania tych metod w geologii inżynierskiej.
The article presents and discusses a few examples of the results of geophysical surveys carried out by the PBG Ltd., for the near surface prospecting of the rock medium. The presented examples refer to studies that use the newest technologies in engineering seismics and electric resistivity tomography. Fundamental practical aspects in relation to potential applications of these methods in engineering geology are discussed.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2011, 446 (1); 215--223
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies