Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "aluminum oxide" wg kryterium: Temat

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 19
Tytuł:
Electric strength of air and sulphur hexafluoride in the system with electrodes covered with dielectric double layer
Autorzy:
Zakrzewski, S.
Opydo, W.
Powiązania:
https://bibliotekanauki.pl/articles/97710.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
electric strength air
sulphur hexafluoride
aluminum oxide
Opis:
The paper presents the results of the study on the effect of dielectric double layer at electrode surface on electric strength of compressed air and compressed sulphur hexafluoride. The research has been carried out at alternate voltage of 50 Hz frequency. It was found that thin insulation coating laid on electrode surface, composed of aluminum oxide layer with a layer of electro-insulation polyester lacquer significantly improves electric strength of air and sulphur hexafluoride. It was found that maximum growth of electric strength of these gases was caused by the coating under their pressures exceeding the atmospheric one (3·105 and 5·105 Pa). The changes in configuration of electrode surface of the insulation systems caused by sparking over have been examined with scanning laser confocal microscope.
Źródło:
Computer Applications in Electrical Engineering; 2012, 10; 394-401
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aluminum Oxide Formation On Fecral Catalyst Support By Electro-Chemical Coating
Powstawanie tlenku glinu na nośniku katalizatora FeCrAl przez osadzanie elektrochemiczne
Autorzy:
Yang, H. S.
Jang, D. H.
Lee, K. J.
Powiązania:
https://bibliotekanauki.pl/articles/355942.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FeCrAl
catalyst support
aluminum oxide formation
PEO
plasma electrolytic oxidation
electrochemical coating
nośnik katalizatora
tlenek glinu
plazmowe utlenianie elektrolityczne
elektrochemiczne osadzanie
Opis:
FeCrAl is comprised essentially of Fe, Cr, Al and generally considered as metallic substrates for catalyst support because of its advantage in the high-temperature corrosion resistance, high mechanical strength, and ductility. Oxidation film and its adhesion on FeCrAl surface with aluminum are important for catalyst life. Therefore various appropriate surface treatments such as thermal oxidation, Sol, PVD, CVD has studied. In this research, PEO (plasma electrolytic oxidation) process was applied to form the aluminum oxide on FeCrAl surface, and the formed oxide particle according to process conditions such as electric energy and oxidation time were investigated. Microstructure and aluminum oxide particle on FeCrAl surface after PEO process was observed by FE-SEM and EDS with element mapping analysis. The study presents possibility of aluminum oxide formation by electro-chemical coating process without any pretreatment of FeCrAl.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1503-1506
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorpcja jonów chromu(III) oraz jonów chromu(VI) na nanoporowatym tlenku glinu
Adsorption of chromium(III) and chromium(VI) ions on nanoporous aluminum oxide
Autorzy:
Wojtal, T.
Powiązania:
https://bibliotekanauki.pl/articles/182464.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Metalurgii Żelaza im. Stanisława Staszica
Tematy:
chrom
tlenek glinu
spektrometria
ICP OES
adsorpcja
membrana Anodisc
chromium
aluminum oxide
adsorption
Anodisc membrane
Opis:
Współczesne metody spektroskopowe i elektrochemiczne nie zawsze pozwalają na oznaczanie pierwiastków toksycznych takich jak chrom(VI) w bardzo niskim zakresie stężeń. Z tego powodu konieczne jest zastosowanie technik zatężania analitów. Jedną z najczęściej stosowanych technik wzbogacania jest ekstrakcja do fazy stałej. Istotne jest odpowiednie dobranie adsorbentu (fazy stałej). W pracy przebadano możliwość adsorpcji jonów chromu(III) oraz chromu(VI) na nanoporowatym tlenku glinu. Przeprowadzono odpowiednią modyfikację tlenku glinu z wykorzystaniem (3-mercaptopropyl)trimetoksysilanu (MPTMS) mającą na celu wprowadzenie grup tiolowych zdolnych do kompleksowania jonów metali. Przebadano wpływ środowiska reakcji na proces adsorpcji. Efekt modyfikacji adsorbentu weryfikowano z zastosowaniem techniki rentgenowskiej spektrometrii fluorescencyjnej z dyspersją energii (EDXRF). Pomiary stężenia jonów chromu(III) oraz jonów chromu (VI) prowadzono z wykorzystaniem emisyjnej spektrometrii atomowej ze wzbudzeniem w plazmie sprzężonej indukcyjnie (ICP OES).
Modern spectroscopic and electrochemical methods do not always allow the determination of elements toxic to a very low concentration range, such as chromium (VI). Therefore, analytical concentration techniques are used, and one of the most commonly used is solid phase extraction. In this method, it is important to choose the appropriate adsorbent (solid phase). The study investigated the adsorption of chromium (III) and chromium (VI) ions on nanoporous alumina. An appropriate modification of aluminum oxide was carried out using (3-mercaptopropyl) trimethoxysilane (MPTMS) to introduce thiol groups capable of complexing metal ions. The influence of the reaction environment on the adsorption process was tested. The effect of adsorbent modification was verified using energy dispersive X-ray fluorescence (EDXRF). Measurements of chromium (III) ions and chromium (VI) ions were carried out using inductively coupled plasma optical emission spectrometry (ICP OES).
Źródło:
Prace Instytutu Metalurgii Żelaza; 2017, T. 69, nr 4, 4; 48-52
0137-9941
Pojawia się w:
Prace Instytutu Metalurgii Żelaza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Analysis of the Thermal and Dielectric Properties of High Voltage Insulating Materials with the Addition of Aluminium Oxide
Autorzy:
Tomášková, T.
Trnka, P.
Gutten, M.
Korenčiak, D.
Powiązania:
https://bibliotekanauki.pl/articles/353555.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electroinsulation systems
dielectric properties
epoxy resin
aluminum oxide
temperature
frequency
Opis:
This article describes the influence of thermal and dielectric properties of materials to properties of electrical insulating systems in high voltage electrical equipment. The aim of this experiment is to improve the thermal and dielectric properties of electrical insulating (composite) materials using micro fillers of aluminium oxide Al2O3 . Supplement of fillers of aluminium oxide with better thermal conductivity to the electrical insulating systems can be modified to increase their thermal conductivity. Improving the thermal conductivity of electric insulation by addition of micro- or nanofillers and in the same time not adversely affecting the dielectric properties is the objective of the study. Paper is presenting the results measured on prepared samples. Improved thermal conductivity is compared with other dielectric properties as: dissipation factor temperature dependences, resistivity and dielectric spectroscopy. To determine the dielectric insulating properties the following characteristics were measured: tanδ versus temperature from 110°C to 150°C, absorption and resorption currents, volume resistivity. Furthermore, this article describes analysis of moisture and conductivity the material by dielectric spectroscopy.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 641-646
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Al2O3/4H-SiC and Al2O3/SiO2/4H-SiC MOS structures
Autorzy:
Taube, A.
Guziewicz, M.
Kosiel, K.
Gołaszewska-Malec, K.
Król, K.
Kruszka, R.
Kamińska, E.
Piotrowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/953063.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum oxide
MOS
silicon carbide
4H-SiC
high-K dielectrics
tlenek glinu
węglik krzemu
dielektryki high-k
Opis:
The paper presents the results of characterization of MOS structures with aluminum oxide layer deposited by ALD method on silicon carbide substrates. The effect of the application of thin SiO2 buffer layer on the electrical properties of the MOS structures with Al2O3 layer has been examined. Critical electric field values at the level of 7.5–8 MV/cm were obtained. The use of 5 nm thick SiO2 buffer layer caused a decrease in the leakage current of the gate by more than two decade of magnitude. Evaluated density of trap states near the conduction band of silicon carbide in Al2O3/4H-SiC MOS is about of 1×1013 eV−1cm−2. In contrast, the density of the trap states in the Al2O3/SiO2/4H-SiC structure is lower about of one decade of magnitude i.e. 1×1012 eV−1cm−2. A remarkable change in the MOS structure is also a decrease of density of electron traps located deeply in the 4H-SiC conduction band below detection limit due to using of the SiO2 buffer layer.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2016, 64, 3; 537-551
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Abrasion Resistance of S235, S355, C45, AISI 304 and Hardox 500 Steels with Usage of Garnet, Corundum and Carborundum Abrasives
Autorzy:
Szala, Mirosław
Szafran, Michał
Macek, Wojciech
Marchenko, Stanislav
Hejwowski, Tadeusz
Powiązania:
https://bibliotekanauki.pl/articles/103045.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
abrasion
wear resistance
dry sand-rubber wheel test
garnet
aluminum oxide
silicon carbide
steel
hardness
microstructure
odporność na ścieranie
test koła suchy piasek-guma
granat
tlenek glinu
węglik krzemu
stal
twardość
mikrostruktura
Opis:
The steel presents a wide field of application. The abrasive wear resistance of steel relies mainly on the microstructure, hardness as well as on the abrasive material properties. Moreover, the selection of a abrasion-resistant grade of steel still seems to be a crucial and unsolved problem, especially due to the fact that the actual operating conditions can be affected by the presence of different abrasive materials. The aim of this work was to determine the effect of different abrasive grit materials i.e. garnet, corundum and carborundum on the abrasive wear result of a commonly used in industry practice steels i.e. S235, S355, C45, AISI 304 and Hardox 500. The microstructure of the steel was investigated using light optical microscopy. Moreover, hardness was measured with Vickers hardness tester. Additionally, the size and morphology of the abrasive materials were characterized. The abrasion tests were conducted with the usage of T-07 tribotester (dry sand rubber wheel). The results demonstrate that the hardness and structure of steels and hardness of abrasive grids influenced the wear results. The abrasive wear behavior of steels was dominated by microscratching and microcutting wear mechanisms. The highest mass loss was obtained for garnet, corundum, and carborundum, respectively. The usage of various abrasives results in different abrasion resistance for each tested steel grade. The AISI 304 austenitic stainless steel presents an outstanding abrasive wear resistance while usage of corundum and Hardox 500 while using a garnet as abrasive material. The C45 carbon steel was less resistant than AISI 304 for all three examined abrasives. The lowest resistance to wear in garnet and carborundum was obtained for the S235JR and S355J2 ferritic-perlitic carbon steels and in corundum for Hardox 500 which has tempered martensitic structure.
Źródło:
Advances in Science and Technology. Research Journal; 2019, 13, 4; 151-161
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania laboratoryjne przyczepności stwardniałych zaczynów cementowych z dodatkiem nanotlenku glinu do wybranych formacji skalnych
Laboratory tests of adhesion of hardened cement slurries with an addition of aluminum nanoxide to various rock formation
Autorzy:
Rzepka, Marcin
Kędzierski, Miłosz
Powiązania:
https://bibliotekanauki.pl/articles/2143369.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
nanotlenek glinu
zaczyn cementowy
kamień cementowy
przyczepność
cement
skała
nano aluminum oxide
cement slurry
cement stone
formation
bonding
Opis:
Artykuł przedstawia wyniki badań laboratoryjnych przyczepności zaczynów cementowych do trzech formacji skalnych, tj. rdzeni powstałych z piaskowca, mułowca oraz węgla kamiennego. Przygotowane rdzenie skalne (przed zalaniem zaczynem cementowym) poddawane były procesowi przemywania w różnych cieczach (prowadzono też badania dla tzw. rdzeni suchych). Do badań przyczepności wytypowano recepturę zaczynu cementowego zawierającą 1% nanotlenku glinu (n-Al2O3) oraz recepturę konwencjonalną (porównawczą, tj. bez udziału nanokomponentu). Badane zaczyny cementowe miały dobre parametry technologiczne, umożliwiające ich zastosowanie do uszczelniania kolumn rur okładzinowych w otworach wiertniczych o temperaturze dynamicznej około 35°C oraz ciśnieniu około 15 MPa. Po wykonaniu szeregu badań laboratoryjnych stwierdzono, że zaczyn zawierający dodatek 1% n-Al2O3 w wyraźny sposób podnosił przyczepność kamienia cementowego do formacji skalnej. Uzyskane wartości przyczepności dla zaczynu z n-Al2O3 w porównaniu z wartościami otrzymanymi dla zaczynu konwencjonalnego są około 30–40% wyższe. Analizując przyczepność kamienia cementowego (z dodatkiem i bez dodatku nanokomponentu) do różnego rodzaju formacji skalnych, należy zaznaczyć, że: najwyższą przyczepność zanotowano w przypadku piaskowca, nieco niższą – mułowca (około 80–85% wartości przyczepności uzyskanej dla piaskowca), a najniższą – węgla (około 70–75% wartości przyczepności uzyskanej dla piaskowca). Zależność ta zachodzi w podobny sposób w przypadku rdzeni „suchych”, jak i przemytych płuczką, buforem oraz cieczą przemywającą. Należy podkreślić niezwykle istotną rolę odpowiedniego procesu przemywania otworu wiertniczego przed wykonaniem zabiegu cementowania rur okładzinowych. Zastosowanie samego buforu może okazać się niewystarczające. Dodatkowe użycie odpowiednio dobranej cieczy przemywającej pozwala skutecznie usunąć resztki osadu filtracyjnego pozostającego na powierzchni formacji skalnej po jej przewierceniu, co powinno znacznie poprawić stan zacementowania otworu wiertniczego.
The article presents the results of laboratory tests of adhesion of cement slurries to three rock formations, i.e. sandstone, mudstone and hard coal cores. The prepared rock cores (before being poured over with cement slurry) were washed in various fluids (tests were also conducted for the so-called “dry” cores). The adhesion tests were carried out for two selected cement slurries recipes: cement slurry containing 1% aluminum nanoxide (n-Al2O3) and conventional cement slurry (comparative, i.e. without the addition of nanocomponents). The tested cement slurries had good technological parameters, enabling their use for sealing casing columns in boreholes with a dynamic temperature of approx. 35°C and a pressure of approx. 15 MPa. After a series of laboratory tests, it was found that the slurry containing the addition of 1% n-Al2O3 significantly increased the adhesion of the cement stone to the rock formation. The obtained values of adhesion for the n-Al2O3 slurry, compared to the values obtained for the conventional slurry, are about 30–40% higher. When analyzing the results of adhesion of cement stone (with and without the addition of a nanocomponent) to various types of rock formations, it is stated that the highest values of adhesion was obtained for sandstone, slightly lower for mudstone (about 80–85% of the adhesion value obtained for sandstone) and the lowest for coal (about 70–75% of the adhesion value obtained for sandstone). This dependence is similar in the case of “dry” cores and those washed with mud, spacer fluid and washing fluid. It should be emphasized that the proper process of washing the borehole is very important prior to cementing the casing. The use of a spacer fluid alone may not be sufficient. The additional use of a properly selected washing liquid increases the mud-cake removal efficiency, which should significantly improve the quality of borehole cementing.
Źródło:
Nafta-Gaz; 2022, 78, 1; 22-30
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości zastosowania nanotlenku glinu w zaczynach cementowych przeznaczonych do uszczelniania rur okładzinowych w otworach wiertniczych
The possibility of using of nano aluminum oxide in cement slurries for sealing casing in boreholes
Autorzy:
Rzepka, Marcin
Kędzierski, Miłosz
Powiązania:
https://bibliotekanauki.pl/articles/1834133.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
nanotlenek glinu
nano-Al2O3
zaczyn cementowy
kamień cementowy
wiązanie zaczynu
wytrzymałość mechaniczna
nano aluminum oxide
cement slurry
cement sheath
cement setting
mechanical strength
Opis:
The article presents compositions and test results for cement slurries formulations containing from 1% to 5% of nano aluminum oxide (n-Al2O3) for sealing the casing columns in boreholes with dynamic temperatures of about 30°C and 60°C. Laboratory tests of cement slurries were carried out at Oil and Gas Institute - National Research Institute. The densities of tested slurries ranged from 1,820 to 1,920 kg/m3 , and were prepared on the basis of Portland cement CEM I 42,5 and class G oil well cement. Cement slurries had thickening times properly matched to given geological and technical conditions. For slurries tested at lower temperatures, particular attention was paid to the gelling and setting process of cement slurries. These parameters play a key role in limiting possible gas migrations from shallow gas accumulations. They were selected so that the gelling and setting process could be carried out in a sufficiently short time. At higher temperatures, the focus was on developing cement slurry formulations with increased mechanical strength and a tight and compact microstructure. Cement slurry formulations with very good technological parameters were developed, which after curing (after 28 days of hydration) had very high values of compressive strength, reaching up to 40 MPa. Such high compressive strength values are extremely difficult to obtain with conventional cement slurries. Scanning electron microscope images of cement samples also confirm extremely compact microstructure of the samples with nano-SiO2. In addition to the photographs of base cement stones, which show pores, microscopic images of samples with the addition of 3% n-Al2O3 are presented, where we observe a compact cement matrix with very low permeability. Furthermore, samples containing n-Al2O3 were characterized by a very low content of capillary pores. Pores of the smallest size (below 100 nm) constituted the vast majority of the total number of pores. Improvement of cement matrix tightness by reducing the amount of pores that can transport the reservoir medium to approx. 1.5% means that cement slurry formulas containing nano aluminum oxide can be successfully used in the process of cementing casing strings in boreholes.
Źródło:
Nafta-Gaz; 2020, 76, 1; 46-56
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microalloying of Continuous Cast Aluminum Strip and Structural Modification Using Plastic Treatment to a 9 μm Foil (Patent no. 39762, P-377/76)
Autorzy:
Purenović, M. M.
Purenović, Jelena M.
Baralić, J. Č.
Powiązania:
https://bibliotekanauki.pl/articles/2203751.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
microalloying
modified continuous cast aluminum strip
nano oxide film
corrosion stability
plasticity
superplasticity
equiaxed structure
strain hardening
surface tension
crystallization zone
dendrites
crystal twinning
Opis:
Innovative procedure of microalloying continuous cast aluminum strip, thickness 10 mm, by Be, Zr and Mn using 3C Pechiney technology (no. 39762, P-377/76), and modifying the existing parameters for strip casting and crystallization was implemented under industrial conditions with two randomly selected batches 2×8 tones, without previous selection of standardized quality of aluminum, purity Al 99.5%, obtained by electrolysis. The application of microalloying and overall structural modification of the technology resulted in obtaining nanoscale, ultra-thin, compact oxide high-gloss film with uniform surface of continuous cast strip, instead of the usual thick and porous oxide film. The outcome of microalloying the obtained equiaxed fine-grained nano/micro structure was avoiding anisotropic and dendritic microstructure of the strip, and improving deformation and plastic properties of modified continuous cast strip subjected to the technology of plastic treatment by rolling until the desired foil thickness of 9 μm was obtained. The invention of microalloying and structural modification, including multiplying effect of several components, directly or indirectly, changed numerous structurally-sensitive properties. The obtained nano/micro structure of crystal grains with equiaxed structure resulted in the synergy of undesirable <111> and inevitable <100> and <110> textures. Numerous properties were significantly enhanced: elastic modulus was improved, and intensive presence of cracks in warm forming condition was prevented due to rapid increase of the number of grains to 10000 grains/cm2 in as-cast state.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 345--357
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parameter Characterization in Processing of Silver - Aluminum Based Electrical Contact Materials
Autorzy:
Praveen Kumar, S.
Parameshwaran, R.
Ananthi, A.
Jenil Jaba Sam, J.
Powiązania:
https://bibliotekanauki.pl/articles/352711.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrical contactor
silver
aluminum
tin oxide
conduction
Opis:
An electrical contractor is one which plays significant role in day todays life in industries as well as in home appliances. In current scenario the materials for conducting purpose has an overwhelming research capability. Now a day the silver based electrical contact composite material have provided the potential applications in aerospace and automobile industries. Among silver based contact material the silver cadmium oxide and silver tin oxide plays a vital role in fabrication of electrical contactors. In this research an attempt has been made to study the influence of adding Aluminum with silver based electrical contact composite materials by two different processing routes namely stir-casting and powder metallurgy. Silver and aluminum matrix plays a virtual role in composite world owing to their highest conductivity. Optimum parameters were identified for attaining the maximum properties such as conductivity, hardness, density, and porosity of composition. By this better conducting property and mechanical property of the electrical contact can be improved by this system. Thus a screening test has be conducted with addition of Al with silver tin oxide compositions hence this paper aims to process the aluminum – silver based electrical contact materials by stir casting processing and powder metallurgy route and compare the results obtained.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1895-1901
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the image analysis methods for the study of Al2O3 surafce coatings
Autorzy:
Korzekwa, Joanna
Gądek-Moszczak, Aneta
Powiązania:
https://bibliotekanauki.pl/articles/103981.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
computer image analysis
aluminum oxide layer
komputerowa analiza obrazu
warstwy tlenku glinu
Opis:
Anodic oxidation of aluminum alloy in a ternary solution of SFS (sulfuric, phthalic and oxalic acids) with 30g of tungsten disulfide (WS2) powder was carried out in order to obtain the aluminum oxide layer named in article as Al2O3/WS2 coatings. The microstructures of surface of obtained coatings were investigated. The subject of the analysis was a threadlike hill structure visible on the surface of coatings as bright ridges. The computer image analysis was performed in order to study the influence of electrolysis time and temperature of acids bath on the volume fraction VV of the area of the surface with filamentous hill’s structure.
Źródło:
Quality Production Improvement - QPI; 2019, 1, 1; 406-411
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thulium-doped optical fibers for fiber lasers operating at around 2 μm
Autorzy:
Kasik, I.
Kamradek, M.
Aubrecht, J.
Peterka, P.
Podrazky, O.
Cajzl, J.
Mrazek, J.
Honzatko, P.
Powiązania:
https://bibliotekanauki.pl/articles/200843.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
optical fiber
fiber laser
thulium
aluminum oxide
nanoparticles
solution doping
nanoparticle doping
Opis:
The paper deals with spectral and lasing characteristics of thulium-doped optical fibers fabricated by means of two doping techniques, i.e. via a conventional solution-doping method and via a nanoparticle-doping method. The difference in fabrication was the application of a suspension of aluminum oxide nanoparticles of defined size instead of a conventional chloride-containing solution. Samples of thulium-doped silica fibers having nearly identical chemical composition and wave guiding properties were fabricated. The sample fabricated by means of the nanoparticle-doping method exhibited longer lifetime, reflecting other observations and the trend already observed with the fibers doped with erbium and aluminum nanoparticles. The fiber fabricated by means of the nanoparticle-doping method exhibited a lower lasing threshold (by »20%) and higher slope efficiency (by »5% rel.). All these observed differences are not extensive and deserve more in-depth research; they may imply a positive influence of the nanoparticle approach on properties of rare-earth-doped fibers for fiber lasers.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 5; 981-986
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of oxide layers made on aluminum alloy 7075 by different methods
Charakterystyka warstw tlenkowych wytworzonych na stopie aluminium 7075 z zastosowaniem różnych metod
Autorzy:
Jędrusik, M.
Dębowska, A.
Kopia, A.
Petrzak, P.
Koclęga, D.
Kalemba-Rec, I.
Powiązania:
https://bibliotekanauki.pl/articles/263954.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
oxide layers
aluminum alloy 7075
micro-arc oxidation
phosphate coating
chemical method
warstwy tlenkowe
stop aluminium 7075
MAO
fosforanowanie
metoda chemiczna
Opis:
Aluminum and aluminum alloys are now being widely used as materials for structural applications due to a number of valuable properties. Improvement in the functional and decorative properties of aluminum can be obtained by forming an oxide layer on its surface. The aim of the present study was to produce and compare the properties of oxide layers on the surface of aluminum alloy 7075 and compare their properties. The methods that were used during the study were as follows: phosphating, micro-arc oxidation, and a chemical method involving the formation of a passive layer. The layers were subjected to corrosion tests. SEM and EDS methods were used for characterization of the received results. Also, some tests on an optical profilometer were done. It was proven that the micro-arc oxidation method allowed us to obtain a layer with the greatest thickness and highest corrosion resistance.
Glin i jego stopy są obecnie powszechnie wykorzystywanym materiałem do zastosowań konstrukcyjnych ze względu stosunek masy do wytrzymałości. Poprawę własności funkcyjnych i dekoracyjnych aluminium uzyskać można przez wytworzenie warstwy tlenku na jego powierzchni. Celem badań było wytworzenie warstw tlenkowych na podłożu ze stopu aluminium 7075 i porównanie ich właściwości. Zastosowano trzy metody: fosforanowanie, micro-arc oxidation oraz metodę chemiczną polegającą na wytworzeniu warstwy pasywnej. Otrzymane powłoki poddano testom korozyjnym oraz charakteryzowano z zastosowaniem następujących metod: SEM, EDS. Wykonano też badania na profilometrze optycznym. Metoda micro-arc oxidation pozwala na uzyskanie warstwy o największej grubości oraz najlepszej odporności na korozję.
Źródło:
Metallurgy and Foundry Engineering; 2016, 42, 3; 187-193
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new chemical mechanical slurry for polishing yttrium aluminium garnet material with magnesium oxide, sodium metasilicate pentahydrate and zirconium dioxide abrasive particles
Autorzy:
Duc, Le Anh
Hieu, Pham Minh
Quang, Nguyen Minh
Powiązania:
https://bibliotekanauki.pl/articles/24084631.pdf
Data publikacji:
2023
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
chemical-mechanical polishing
yttrium aluminum garnet
magnesium oxide
abrasive particles
Opis:
This work provided a new chemical-mechanical polishing mixture with MgO, sodium metasilicate pentahydrate, ZrO2 abrasive particles, and deionized water. With chemical-mechanical slurry (CMS) proposed for polishing yttrium aluminum oxide (Y3Al5O12) the surface reaction layer formed with significantly reduced hardness compared to other Y3Al5O12 materials, these products combine with MgO to form montmorillonites (3MgO–Al2O3–3SiO2–3Y2O3–5Al2O3). With this formation, the surface layer of Y3Al5O12 material becomes soft and is easily removed by ZrO2 abrasive particles under the influence of mechanical polishing, resulting in superfine surfaces generated from the proposed CMS model. The experimental results show that the surface quality with CMS proposed gives the surface quality with Ra = 0.471 nm along with the material removal rate 31 (nm/min). Surface quality is improved by 71% along with a superior material removal rate (increased by 287%) compared to silica slurry. The results show excellent polishing ability from CMS proposed for polishing Y3Al5O12 materials.
Źródło:
Journal of Machine Engineering; 2023, 23, 2; 174--185
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of atomic layer deposition technological parameters on optical properties and morphology of Al2O3 thin films
Autorzy:
Dobrzanski, L. A.
Szindler, M.
Hajduk, B.
Kotowicz, S.
Powiązania:
https://bibliotekanauki.pl/articles/173801.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
thin film
aluminum oxide
atomic layer deposition
Opis:
This paper presents some results of investigations on aluminum oxide Al2O3 thin films prepared by the atomic layer deposition method on polished monocrystalline silicon. It has been described how the technological parameters of the deposition process, like the number of cycles and substrate temperature, influenced the optical properties and morphology of prepared thin films. Their physical and optical properties like thickness, uniformity and refractive index have been investigated with spectroscopic ellipsometry, atomic force microscopy and UV/vis optical spectroscopy.
Źródło:
Optica Applicata; 2015, 45, 4; 573-583
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 19

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies