Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "air heat pump" wg kryterium: Temat


Tytuł:
The influence of heat source location on surface temperature distribution of the indoor side of external walls in an uninsulated apartment in Warsaw during the heating season
Autorzy:
Różycki, K.
Powiązania:
https://bibliotekanauki.pl/articles/104195.pdf
Data publikacji:
2018
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
air-to-air heat pump
uninsulated building
thermovision
alternative heating system
wall
Opis:
This article presents the influence of the heat source location to surface temperature distribution of the indoor side of external walls in an uninsulated apartment in Warsaw during the heating period. The apartment is located in a multi-family residential building. This building has never been thermomodernized and therefore it is highly energy-consuming. In 2016, an air-to-air heat pump was installed in the apartment and replaced the existing heat source, a dual-function gas boiler. The device is used both for heating the apartment during the heating period and cooling it during the summer. Such system works particularly well in non-insulated objects, in which the partition’s internal surface temperature changes dynamically as the outside temperature changes. This article describes the results of the thermovision test of the walls of this flat. The surface internal temperature distribution on the selected three walls was examined under different atmospheric conditions while maintaining similar internal conditions.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2018, 65, 3; 65-72
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Waste Heat Recovery from Servers Using an Air to Water Heat Pump
Autorzy:
Lipiński, Seweryn
Duda, Michał
Górski, D.
Powiązania:
https://bibliotekanauki.pl/articles/2069738.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
air-water heat pump
server cooling
waste heat
heat recovery
domestic hot water
Opis:
The analysis of advisability and profitability of using an air to water heat pump for the purpose of waste heat recovery from servers being used as cryptocurrency mining rigs, was performed. To carry out such an analysis, the cooling unit of the computing server was connected to the heat pump, and the entire system was adequately equipped with devices measuring parameters of the process. Performed experiments proves that the heat pump coefficient of performance (COP) reaches satisfactory values (i.e., an average of 4.21), what is the result of stable and high-temperature source of heat at the pump inlet (i.e., in the range of 29.9-34.1). Economic analysis shows a significant reduction in the cost of heating domestic hot water (by nearly 59-61%). The main conclusion which can be drawn from the paper, is that in a case of having a waste heat source in a form of a server or similar, it is advisable to consider the purchase of air-to-water heat pump for the purpose of domestic hot water heating.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2021, 24(1); 105--113
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza energetyczna, ekologiczna i ekonomiczna współpracy odnawialnych źródeł energii z pompą ciepła
Energy, ecological and economic analysis of cooperation of renewable energy sources with a heat pump
Autorzy:
Wienchol, Paulina
Powiązania:
https://bibliotekanauki.pl/articles/101721.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydział Inżynierii Środowiska i Energetyki. Instytut Techniki Cieplnej
Tematy:
odnawialne źródła energii
zapotrzebowanie cieplne budynku
gruntowa pompa ciepła
powietrzna pompa ciepła
rozwój zrównoważony
renewable energy sources
building heat demand
ground heat pump
air heat pump
sustainable development
Opis:
W ramach Polityki UE do 2030 r. realizowane są trzy główne cele, które związane są ze zmniejszeniem emisji gazów cieplarnianych, zwiększeniem udziału odnawialnych źródeł energii i wzrostem efektywności energetycznej. Wykonanie założonego planu wiąże się przede wszystkim z dokonaniem niezbędnych inwestycji w sektorze komunalno-bytowym. Jest to spowodowane znaczącą ilością emisji zanieczyszczeń, które pochodzą z lokalnych kotłów i palenisk. Celem niniejszej pracy jest analiza energetyczna współpracy odnawialnych źródeł energii z pompą ciepła, na przykładzie wybranego domu jednorodzinnego, zlokalizowanego w województwie śląskim. Podczas analizy zbadano dwa przypadki,w pierwszym budynek jest ogrzewany wyłącznie gruntową pompą ciepła, a w drugim powietrzną. Następnie porównano działanie obu pomp pod względem efektywności energetycznej. W analizie ekologicznej sprawdzono wpływ wykorzystania alternatywnych źródeł energii do zasilania pompy ciepła i urządzeń gospodarstwa domowego na stan środowiska naturalnego. Analizowanymi źródłami odnawialnej energii jest energia słoneczna oraz wiatrowa. Na podstawie ich podstawowych charakterystyk oraz rzeczywistych danych środowiskowych, dotyczących promieniowania słonecznego, prędkości wiatru i temperatury otoczenia, obliczono ilość produkowanej energii w wybranych instalacjach. Następnie przeprowadzono analizę ekonomiczną, w której obliczono prosty czas zwrotu omawianych inwestycji. Otrzymane wyniki pozwolą na stwierdzenie, które urządzenie grzewcze pracuje bardziej wydajnie oraz jakie źródło odnawialnej energii przyniesie większe korzyści pod względem energetycznym, ekologicznym oraz ekonomicznym.
Within the framework of the EU Policy until 2030, three main objectives are pursued, which are related to reducing greenhouse gas emissions, increasing the share of renewable energy sources and energy efficiency. The implementation of the plan is associated with making the necessary investments in the municipal and living sector. This is caused by a significant amount of pollutant emissions that originate from local boilers and hearths. The purpose of this work is energy analysis of cooperation of renewable energy sources with a heat pump, on the example of a selected single-family house, located in the Silesian. During the analysis, two cases were examined, in the first building itis heated only with a ground heat pump, and in the second one it is air-heated. Then the operation of both pumps was compared in terms of energy efficiency. In the ecological analysis, the effect of using alternative energy sources to power the heat pump was checked and household appliances for the condition of the natural environment. The analyzed sources of renewable energy are solar and wind energy. Based on their basic characteristics and real environmental data, regarding solar radiation, wind speed and ambient temperature, the amount of energy produced in the installations was calculated. Then, an economic analysis was carried out, in which the simple payback time of the discussed investments was calculated. The obtained results will allow to determine which heating device works more efficiently and what source of renewable energy will bring greater benefits in terms of energy, ecology and economy.
Źródło:
Archiwum Instytutu Techniki Cieplnej; 2018, 4; 127-151
2451-277X
Pojawia się w:
Archiwum Instytutu Techniki Cieplnej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technical and Economic Analysis of The Use of Heat Pumps in a Public Facility
Autorzy:
Wiekiera, Radosław
Powiązania:
https://bibliotekanauki.pl/articles/27314842.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
air-water heat pump
ground-water heat pump
heat pumps
RES
pompy ciepła powietrze-woda
pompa ciepła grunt-woda
pompy ciepła
OZE
Opis:
A heat pump uses natural energy from renewable sources such as air, ground or water. The pump, acquiring thermal energy from the environment (75%) and using electricity (25%), supplies it to the heated object. A heat pump-based system consists of a ground heat source (heat is taken from it), a heat pump unit and an upper heat source (heat is transferred to it). The refrigerant transfers heat from the lower heat source to the upper heat source. The paper discusses types of heat pumps in terms of the use of the lower heat source. A technical and economic analysis was carried out on the basis of two types of heat pump: air-to-water and ground-to-water A comparative analysis of the results obtained results will allow a real assessment of the system’s functioning.
Źródło:
Civil and Environmental Engineering Reports; 2022, 32, 4; 376--388
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric study of fluid flow and heat transfer over louvered fins of air heat pump evaporator
Autorzy:
Muszyński, T.
Kozieł, S. M.
Powiązania:
https://bibliotekanauki.pl/articles/240658.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat exchangers
heat transfer intensification
CFD
convection
air source heat pump
wymienniki ciepła
intensyfikacja wymiany ciepła
konwekcja
powietrzne pompy ciepła
Opis:
Two-dimensional numerical investigations of the fluid flow and heat transfer have been carried out for the laminar flow of the louvered fin-plate heat exchanger, designed to work as an air-source heat pump evaporator. The transferred heat and the pressure drop predicted by simulation have been compared with the corresponding experimental data taken from the literature. Two dimensional analyses of the louvered fins with varying geometry have been conducted. Simulations have been performed for different geometries with varying louver pitch, louver angle and different louver blade number. Constant inlet air temperature and varying velocity ranging from 2 to 8 m/s was assumed in the numerical experiments. The air-side performance is evaluated by calculating the temperature and the pressure drop ratio. Efficiency curves are obtained that can be used to select optimum louver geometry for the selected inlet parameters. A total of 363 different cases of various fin geometry for 7 different air velocities were investigated. The maximum heat transfer improvement interpreted in terms of the maximum efficiency has been obtained for the louver angle of 16° and the louver pitch of 1.35 mm. The presented results indicate that varying louver geometry might be a convenient way of enhancing performance of heat exchangers.
Źródło:
Archives of Thermodynamics; 2016, 37, 3; 45-62
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the Alternative Energy Sources in Heating and Air-Conditioning Installations
Wykorzystanie alternatywnych źródeł energii w instalacjach grzewczo-klimatyzacyjnych
Autorzy:
Cholewa, T.
Guz, Ł.
Siuta-Olcha, A.
Powiązania:
https://bibliotekanauki.pl/articles/388097.pdf
Data publikacji:
2010
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
alternatywne źródła energii
kolektory słoneczne
absorpcyjna pompa ciepła
sprężarkowa pompa ciepła
alternative energy sources
solar collectors
absorptive heat pump
air-compressor heat pump
Opis:
One of the most important problems of last years is the development of society, which is not compatible with environment protection. Total consumption of energy does not reflect already the degree of economic development. The index of scientifical and technical progress is nowadays the minimization of the energy consumption and its ecological cleanness. Additionally growing prices of energy carriers, the environmental degradation and climate changes make alternative energy sources interesting. Alternative energy sources can be used not only for room heating but also for its cooling. The connection these both functions by means of 4 different ideas of the heating and air-conditioning installation for the existing auditorium is presented. In the first idea main devices are solar collectors, air-compressor heat pump, the underground heat magazine filled with stones and a water, and ground probes. The second solution introduces the connection into one system of solar collectors, the air-compressor heat pump, the triple hydraulical coupling and ground probes. Into the third solution entered ground probes, solar collectors, absorptive heat pump and the gas boiler. The main elements of the fourth solution are compact heating and cooling devices and solar collectors, which work with warm water tank. The technological schema with well-chosen devices are presented and the special attention on advantages and disadvantages of each solutions is paid. Besides for solution III and IV capital costs, the annual conventional fuel consumption on needs of the heatings, emissions of pollutions to the atmosphere and savings resulting from the use of alternative sources energy were calculated.
Jednym z ważniejszych problemów ostatnich lat jest pogodzenie rozwoju cywilizacyjnego społeczeństwa ze środowiskiem naturalnym. Globalne zużycie energii nie odzwierciedla już dziś stopnia rozwoju gospodarczego, a wręcz odwrotnie. Wyznacznikiem postępu naukowo-technicznego danego kraju jest obecnie minimalizacja zużycia energii i jej ekologiczna czystość. Dodatkowo ciągle rosnące ceny nośników energii, degradacja środowiska naturalnego oraz zmiany globalne klimatu doprowadziły do wzrostu zainteresowania alternatywnymi źródłami energii. Alternatywne źródła energii można wykorzystywać zarówno do ogrzewania, jak i chłodzenia pomieszczeń. Połączenie tych obu funkcji zaprezentowano za pomocą 4 różnych koncepcji instalacji grzewczo-klimatyzacyjnych dla sali wykładowej. W pierwszej koncepcji głównymi urządzeniami są kolektory słoneczne, sprężarkowa pompa ciepła, podziemny magazyn ciepła wypełniony kamieniami i wodą oraz sondy gruntowe. Drugie rozwiązanie przedstawia połączenie w jeden układ kolektorów słonecznych, sprężarkowej pompy ciepła, trójdzielnego sprzęgła hydraulicznego oraz sond gruntowych. W skład trzeciego rozwiązania weszły sondy gruntowe, kolektory słoneczne, absorpcyjna pompa ciepła oraz kocioł gazowy. Natomiast głównymi elementami czwartego rozwiązania są kompaktowe urządzenia grzewczo-chłodzące, kolektory słoneczne współpracujące z biwalentnym podgrzewaczem wody. Zaprezentowano schematy technologiczne z dobranymi urządzeniami oraz zwrócono uwagę na wady i zalety poszczególnych rozwiązań. Ponadto dla rozwiązania III oraz IV obliczono koszty inwestycyjne, roczne zużycie paliwa konwencjonalnego, emisje zanieczyszczeń do atmosfery oraz oszczędności, które wynikają z wykorzystania odnawialnych źródeł energii.
Źródło:
Ecological Chemistry and Engineering. A; 2010, 17, 11; 1473-1481
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Powietrzne pompy ciepła w audytach energetycznych
Air source heat pump’s in energy audits
Autorzy:
Gużda, A.
Szmolke, N.
Powiązania:
https://bibliotekanauki.pl/articles/2065534.pdf
Data publikacji:
2018
Wydawca:
Politechnika Częstochowska
Tematy:
powietrzna pompa ciepła
audyt energetyczny
efektywność
współczynnik COP
air source heat pump
energetic audit
efficiency
coefficient of performance
Opis:
Pompy ciepła, ze względu na wysoki współczynnik efektywności działania (COP, ang. coefficient of performance), często wybierane są jako wariant przedsięwzięcia mającego na celu poprawę efektywności energetycznej w budynku. W niniejszym artykule przedstawiony został jeden z obecnie najbardziej efektywnych sposobów wytwarzania ciepłej wody użytkowej i ogrzewania budynków, jakim jest zastosowanie powietrznej pompy ciepła. Zaprezentowano zasadę działania takiego urządzenia w instalacji oraz główne parametry wpływające na ich efektywność. Ponadto omówiono zasadność stosowania pomp ciepła, w ujęciu wyboru ich jako wariant przedsięwzięcia termomodernizacyjnego. Omówione zostały zagadnienia związane z prawidłowym doborem urządzenia na etapie obliczeń audytorskich. W końcowej części pracy, autorzy przedstawili przykład obliczeniowy doboru powietrznej pompy ciepła w audycie energetycznym, wraz z określeniem efektu ekologicznego zastosowania tego przedsięwzięcia.
Paper presents one of the most efficient ways of producing hot water and heating of buildings is the present one, which is the use of an air heat pump. They are often chosen to improve energy efficiency in a building. The principle of operation and main parameters influencing their effectiveness were presented. In addition, the use of heat pumps has been discussed in terms of their choice as a variant in energetic audit. The problems related to the correct device selection at the stage of the audit calculations were discussed. In the final part of the paper, the authors presented a computational example of the air-to-water heat pump selection in the energy audit. Moreover the ecological analysis related to different source of energy in building was presented.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2018, 7, 2; 74--80
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie alternatywnych źródeł energii w instalacjach grzewczo-klimatyzacyjnych
Use of alternative energy sources in heating and air-conditioning installations
Autorzy:
Cholewa, T.
Guz, Ł.
Siuta-Olcha, A.
Powiązania:
https://bibliotekanauki.pl/articles/126872.pdf
Data publikacji:
2009
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
alternatywne źródła energii
kolektory słoneczne
absorpcyjna pompa ciepła
sprężarkowa pompa ciepła
sonda gruntowa
alternative energy sources
solar collectors
absorptive heat pump
air-compressor heat pump
ground probe
Opis:
Jednym z ważniejszych problemów ostatnich lat jest pogodzenie rozwoju cywilizacyjnego społeczeństwa ze środowiskiem naturalnym. Globalne zużycie energii nie odzwierciedla już dziś stopnia rozwoju gospodarczego, a wręcz odwrotnie. Wyznacznikiem postępu naukowo-technicznego danego kraju jest obecnie minimalizacja zużycia energii i jej ekologiczna czystość. Dodatkowo ciągle rosnące ceny nośników energii, degradacja środowiska przyrodniczego oraz zmiany globalne klimatu doprowadziły do wzrostu zainteresowania alternatywnymi źródłami energii. Alternatywne źródła energii można wykorzystywać zarówno do ogrzewania, jak i chłodzenia pomieszczeń. Połączenie tych obu funkcji zaprezentowano za pomocą 4 różnych koncepcji instalacji grzewczo-klimatyzacyjnych dla sali wykładowej. W pierwszej koncepcji głównymi urządzeniami są kolektory słoneczne, sprężarkowa pompa ciepła, podziemny magazyn ciepła wypełniony kamieniami i wodą oraz sondy gruntowe. Drugie rozwiązanie przedstawia połączenie w jeden układ kolektorów słonecznych, sprężarkowej pompy ciepła, trójdzielnego sprzęgła hydraulicznego oraz sond gruntowych. W skład trzeciego rozwiązania weszły sondy gruntowe, kolektory słoneczne, absorpcyjna pompa ciepła oraz kocioł gazowy. Natomiast głównymi elementami czwartego rozwiązania są kompaktowe urządzenia grzewczo-chłodzące, kolektory słoneczne współpracujące z biwalentnym podgrzewaczem wody. Zaprezentowano schematy technologiczne z dobranymi urządzeniami oraz zwrócono uwagę na wady i zalety poszczególnych rozwiązań.
One of the most important problems of last years is the development of society, which is not compatible with environment protection. Total consumption of energy does not reflect already to the degree of economic development. The index of scientifical and technical progress is nowadays the minimization of the energy consumption and its ecological cleanness. Additionally growing prices of energy carriers, the environmental degradation and climate changes make alternative energy sources interesting. Alternative energy sources can be used not only for room heating but also for its cooling. The connection these both functions by means of 4 different ideas of the heating and air-conditioning installation for the existing auditorium is presented. In the first idea main devices are solar collectors, air-compressor heat pump, the underground heat magazine filled with stones and water, and ground probes. The second solution introduces the connection into one system of solar collectors, the air-compressor heat pump, the triple hydraulical coupling and ground probes. Into the third solution entered ground probes, solar collectors, absorptive heat pump and the gas boiler. The main elements of the fourth solution are compact heating and cooling devices and solar collectors, which work with warm water tank. The technological schemas with well-chosen devices are presented and the special attention on advantages and disadvantages of each solution is paid.
Źródło:
Proceedings of ECOpole; 2009, 3, 1; 127-132
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technical and environmental assessment of selected heat pump configurations. A case study
Autorzy:
Bugaj, A.
Miniewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/207176.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
geothermal heat pump
air heat pump
primary energy
simulation model
sulfur dioxide emissions
carbon dioxide emissions
emissions of nitrogen oxides
energy efficiency indicators
environmental impact assessment
gruntowa pompa ciepła
powietrzna pompa ciepła
energia pierwotna
model symulacyjny
emisja dwutlenku siarki
emisja dwutlenku węgla
emisja tlenków azotu
wskaźniki efektywności energetycznej
ocena oddziaływania na środowisko
Opis:
Two heat pump systems with the highest energy performance indicators were chosen for an analysis. Those most efficient systems for heating and cooling are ground source heat pumps (GSHP) and the exhaust air heat pumps (EAHP). Consequently, two cases (case A and case B) with different pump configurations were related to a reference case R represented by gas-fired boilers covering heating needs and compression refrigeration units ensuring cooling needs. Technical assessment in the form of coefficients of performance as well as primary energy ratings were completed. An environmental impact taking into account CO2, SO2 and NOx emissions of analysed heat pump systems was also evaluated.
Źródło:
Environment Protection Engineering; 2014, 40, 2; 143-157
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research to estimate energy efficiency of a ventilation and air conditioning heat pump system inside a production premise with ventilation air recovery
Autorzy:
Bezrodny, Myhailo Kostiantynovych
Misiura, Tymofii Oleksiyovych
Powiązania:
https://bibliotekanauki.pl/articles/1955060.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
air conditioning
heat pump system
refrigeration efficiency
recuperation
Opis:
The research provides a thermodynamic analysis of the theoretical model of a ventilation and air conditioning heat pump system with the ventilation air cold energy recovery depending on outside air parameters, the recovery efficiency and characteristics of a premise. A confectionery production workshop was taken as a prototype where technological conditions (temperature and humidity) must be maintained during the warm season. Calculations using the method of successive approximations to estimate air parameters at system’s nodal points were conducted. It allowed to determine theoretical refrigeration efficiency of the studied system and proved advantages of heat recuperation for smaller energy consumption. The model can be applied for design of heating, ventilation, and air conditioning units which work as a heat pump. The studied system has the highest energy efficiency in the area of relatively low environment temperatures and relative humidity which is suitable for countries with temperate continental climates characterized by low relative humidity.
Źródło:
Archives of Thermodynamics; 2021, 42, 4; 69-86
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies