Temat: air environmental pollution - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Solution to Reduce Air Environmental Pollution from Ships
Autorzy:: Pham, H.T.
Nguyen, T.M.
Powiązania:: https://bibliotekanauki.pl/articles/116944.pdf
Data publikacji:: 2015
Wydawca:: Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:: Pollution at Sea
Environment Protection
Ecology, MARPOL
Air Environmental Pollution
Gas Emissions
Exhaust Gas Emissions
Exhaust Gas
Opis:: Exhaust gas emissions from ships are increasingly polluting the air environment seriously. Therefore, the MARPOL 73/78 Annex VI is applied for all ships from 2017, Annex VI provided that the concentrations of NOx,SOx CO contained in ship’s exhaust gases must be less than 6.4 g/kWh, 0.6 g/kWh, and 5.5g/kWh respectively. Today, there are many solutions to reduce pollution emissions from exhaust gas of ships, such as improving combustion, using oil emulsion, using biofuel,…However, these solutions also have a handful of disadventages such as being unable to thoroughly resoulve problems, high cost, and very difficult to improve the quality of ship exhaust gas emissions for old ships. Exhaust gas treatment method uses a centralized treatment system where exhaust gas from the thermal engines is taken in a centralized treatment system before discharging into the air. After centralized treatment system, in comparision with raw exhaust gas, soot can be reduced by 98%, NOx can be reduced by 75%, SOx can be reduced by 80%. This method of treatment is not only low cost, good quality but also make marine heat-engines still use traditional fuels as well as need not improve its structure.
Źródło:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2015, 9, 2; 257-261
2083-6473
2083-6481
Pojawia się w:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Emission inventory of ships calling at the port of Dubrovnik
Autorzy:: Zekić, A.
Ivče, R.
Radonja, R.
Powiązania:: https://bibliotekanauki.pl/articles/2172493.pdf
Data publikacji:: 2022
Wydawca:: Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:: green shipping
CO2 emission
air pollutant emission
air environmental pollution
Croatian ports
maritime cruise market
port of Dubrovnik
emission inventory
Opis:: Cruising tourism is becoming increasingly popular, the number of cruises having seen a continuous increase since the 1970s. In Croatia as well there is an upward trend in the number of cruise passengers and ports. Of all Croatian ports, it is the port of Dubrovnik that has had the most calls by foreign cruisers. The paper analyses the available statistical data on the maritime cruise market in Europe with special reference to the Mediterranean countries. In the national context, a presentation of cruise traffic in the port of Dubrovnik is given. Although this type of tourism contributes to the development and improvement of the economy, it also has a negative impact on the environment through air pollution by CO2 emissions, subsequently affecting human health as well. The authors investigate the level of CO2 emissions in the area of the port of Dubrovnik. CO2 emissions were calculated based on cruiser activity, the calculations being based on CO2 emissions for three ship navigation modes - slow steaming on arrival and departure, manoeuvring on arrival and departure, and for a berthed ship. The aim of the research was to provide a better insight in the emission inventories in this area. This research can also be applied to other port areas.
Źródło:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2022, 16, 2; 219--223
2083-6473
2083-6481
Pojawia się w:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Technical requirements and methods of testing retrofit LPG systems for motor vehicles, in accordance with the UN / ECE 115 Regulation
Autorzy:: Majerczyk, A.
Powiązania:: https://bibliotekanauki.pl/articles/245493.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: air pollution
environmental protection
LPG
Opis:: The UN / ECE 115 Regulation concerns technical requirements and methods of measurements for retrofit LPG systems to be installed in the motor vehicles already in operation In Poland, the 115 Regulation was adopted in 2004 but has not been observed. Regulation 115 is used in other countries, which created the need for tests. ITS has been conducted tests according to R115 since 2006. The technical requirements imposed by 115 Regulation include emission test, OBD testing, testing of maximum power at the wheels and testing the methods of the system elements installation in the vehicle. The article presents the requirements of the Regulation and the conclusions of the tests conducted at ITS on over 100 vehicles equipped with LPG systems. The paper presents: vehicle equipped with LPG systems tested at ITS as part of the statutory ITS work, time of switching over from running on petrol to LPG fuel during the driving test following a cold engine start, onset of the emission during the EUDC test following a cold start in respect to the value of the total emission in the emission test in accordance with the Regulation 83.05 during the first 780 seconds of the driving test, registered signals controlling the operation of the petrol and LPG injectors operation in the engine of a spark ignition and direct petrol injection, operating in the gas mode with a periodical switch over of the supply type, an example of determining power criterion for the family of vehicles.
Źródło:: Journal of KONES; 2011, 18, 3; 227-235
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Marine gas engine marine gas engines application speaking of 6th Marpol Annex
Autorzy:: Wandor, J.
Kończewicz, W.
Wojtaszak, M.
Kamieniecki, M.
Powiązania:: https://bibliotekanauki.pl/articles/241887.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
air pollution
environmental protection
Opis:: The International Maritime Organization set up a global strategy for reducing emission of sulphur from marine fuels, from 4.5% to 0.5% by the end of the year 2020. In order to such strategy, ship-owners need to fulfil increasing demands according to reduce pollution. New regulations, force ship-owners to reduce production of pollution, but as the devices create to remove some part of pollution are very expensive in use, began to search for cheaper and more effective solutions. The main aim of this article is to present superiority of using gas fuel over liquid fuel on ships. The construction of marine engines, run by a gas fuel is in the scope of interest of scientist’s research during the last couple of years. This branch of technology develops very dynamic recently, according to savings that can be reach while using gas engines on ships. Apart of cost reduction, new types of marine engines are able to cope with more and more restrictive regulations that are published in international convention MARPOL. Such restriction became the reason for the biggest, international corporations, specialists in engines production, to carry on long-term researches on new ways to power ship engines. One of the world’s greatest engine producer is British Rolls-Royce that became pioneer and built the first gas engine. New power unit, Bergen B-gas B35:40V is the one of the most modern type of such engine in the world. The solid construction of this engine was based on engine B32. It became very efficiently because of many rationalizations in maintenance and exploitation. Two main priorities, while developing conception for this model, were minimization of fuel consumption and operating simplification. The authors of these article present advantages of using marine engines powered by gas, according to the international MARPOL regulations that became very restrictive in order to protect marine environment. As the examples were used products of Rolls-Royce Company.
Źródło:: Journal of KONES; 2013, 20, 4; 479-484
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Environmental pollution caused by a direct injection engine
Autorzy:: Jankowski, A.
Kowalski, M.
Powiązania:: https://bibliotekanauki.pl/articles/243382.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
air pollution
environmental protection
Opis:: In the paper, the authors made an analysis of mechanisms of the toxic components formation of exhaust gases in the direct injection engines. The genesis as well as the typical engine construction solution with the use of direct injection in diesel engines and these with positive ignition was developed. The typical construction solution of the Common Rail (CR) system, which is one of many elements increasing the purity of exhaust gases, was also presented. The basic advantages of direct injection, especially in case of the positive ignition engine, were also briefly described. Then, the mechanism for the formation of toxic components of exhaust gases in the direct injection diesel engines was presented. Moreover, the definition and dependency on the indicated mean effective pressure were shown, and the closed indicator graph, which is indispensable to calculate values of this pressure, was also (graphically) presented. In this paper, the mechanisms and processes, with the use of which it is possible to reduce the emission of toxic components of exhaust gases, were quoted. The exhaust gas recirculation with the EGR valve, which allows supplying the exact amount of gases to the engine inlet system, is such an example. The advantages of using this type of solutions were described, and a typical construction solution was presented in the diagram. The paper was completed with a conclusion, which emphasised the importance of direct injection on reducing the emission of toxic components of exhaust gases.
Źródło:: Journal of KONES; 2015, 22, 4; 133-138
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: An attempt to reduce the emission of spark-ignition engine with mixtures of bioethanol and gasoline as substitute fuels
Autorzy:: Gis, Wojciech
Gis, Maciej
Wiśniowski, Piotr
Bednarski, Mateusz
Powiązania:: https://bibliotekanauki.pl/articles/247883.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: simulation
combustion engines
air pollution
environmental protection
Opis:: Limiting emissions of harmful substances is a key task for vehicle manufacturers. Excessive emissions have a negative impact not only on the environment, but also on human life. A significant problem is the emission of nitrogen oxides as well as solid particles, in particular those up to a diameter of 2.5 microns. Carbon dioxide emissions are also a problem. Therefore, work is underway on the use of alternative fuels to power the vehicle engines. The importance of alternative fuels applies to spark ignition engines. The authors of the article have done simulation tests of the Renault K4M 1.6 16v traction engine for emissions for fuels with a volumetric concentration of bioethanol from 10 to 85 percent. The analysis was carried out for mixtures as substitute fuels – without doing any structural changes in the engine's crankshafts. Emission of carbon monoxide, carbon dioxide, hydrocarbons, oxygen at full throttle for selected rotational speeds as well as selected engine performance parameters such as maximum power, torque, hourly and unit fuel consumption were determined. On the basis of the simulation tests performed, the reasonableness of using the tested alternative fuels was determined on the example of the drive unit without affecting its constructions, in terms of e.g. issue. Maximum power, torque, and fuel consumption have also been examined and compared. Thus, the impact of alternative fuels will be determined not only in terms of emissions, but also in terms of impact on the parameters of the power unit.
Źródło:: Journal of KONES; 2019, 26, 3; 31-38
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Application of Artificial Neural Networks for Prediction of Air Pollution Levels in Environmental Monitoring
Autorzy:: Pawul, M.
Śliwka, M.
Powiązania:: https://bibliotekanauki.pl/articles/124279.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: environmental monitoring
air pollution
artificial neural networks
prediction
Opis:: Recently, a lot of attention was paid to the improvement of methods which are used to air quality forecasting. Artificial neural networks can be applied to model these problems. Their advantage is that they can solve the problem in the conditions of incomplete information, without the knowledge of the analytical relationship between the input and output data. In this paper we applied artificial neural networks to predict the PM 10 concentrations as factors determining the occurrence of smog phenomena. To create these networks we used meteorological data and concentrations of PM 10. The data were recorded in 2014 and 2015 at three measuring stations operating in Krakow under the State Environmental Monitoring. The best results were obtained by three-layer perceptron with back-propagation algorithm. The neural networks received a good fit in all cases.
Źródło:: Journal of Ecological Engineering; 2016, 17, 4; 190-196
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Dynamic properties of aluminium alloys used in automotive industry
Autorzy:: Moćko, W.
Kowalewski, Z. L.
Powiązania:: https://bibliotekanauki.pl/articles/246638.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road transport
simulation
combustion engines
air pollution
environmental protection
Opis:: Around 20 percent of CO2 emitted as a result of human activity on Earth comes from transportation. One of the ideas, which lead to diminishing of the greenhouse gases emission, is reducing of fuel consumption. It may be achieved by introducing a new powertrain solutions as well as lowering overall vehicle weight. The reduction of vehicle weight may be obtained by both a new design of part and structures and application of a new materials i.e. aluminium alloys. It has to be emphasised that weight reduction is very important for combustion engine driven vehicles and electric driven vehicles as well. Mass lowering is especially desirable in the case of electric vehicles because they typically have a very narrow operational range usually lower than 200 km. Therefore even small weight reduction decreases energy consumption of EV and as a consequence increases its range, which is a crucial parameter for users. The results presented in this article were focused on high strength aluminium alloys of 6082-T6 and 7075-T6 types. Applying of those materials enables mass lowering of structures up to 50 percent, maintaining original functionality. Moreover, aluminium alloys may be also used in energy absorbing structures. The goal of tests was to obtain data required in FE analysis. In order to simulate dynamic phenomenon i.e. vehicle crash investigation of the stress-strain curves of alloys were carried out at wide range of strain rates using Hopkinson bar.
Źródło:: Journal of KONES; 2012, 19, 2; 345-351
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Alternative fuels and technologies for compression ignition internal combustion engines
Autorzy:: Bereczky, A.
Powiązania:: https://bibliotekanauki.pl/articles/241749.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: alternative fuels
air pollution
environmental protection
dual fuel technology
Opis:: The traditional use of fossil-based fuels is now widely considered unsustainable because of depleting their natural resources. Potential substitutes of fossil fuels are oils of renewable origin such as various vegetable and non-edible oils. The aim of using these oils or their methyl esters (biodiesel) is to establish and maintain a balance between agriculture, economy and environment protection. However, realizing the increasing demand of raw materials currently used can be achieved not only by increasing the production area but also by introducing new materials or technologies. The article presents and evaluates modern raw fuel components that are currently being investigated. Furthermore, the article deals with the dual fuel combustion technology in detail, with which the processed fuels are becoming available for use in Compression Ignition (CI) engines, where conventional blending is difficult or their use exclusively in diesel engines is economically unjustified. In case of dual fuel engine systems, the primary fuel, such as (wet)ethanol, methanol, LPG, H2 etc. is injected into the intake manifold of the engine and the premixed mixture simultaneously produced is ignited by the pilot diesel fuel as secondary fuel injected directly into the engine cylinder. This technology can significantly reduce exhaust emissions and can slightly increase engine efficiency. The achievements in this field and recently obtained results by the author and his research group are also presented. Exhaust emissions, performance and combustion characteristics were measured and analyzed with respect to several operating parameters as follows: premixed ratio (rp), pilot timing and engine load.
Źródło:: Journal of KONES; 2012, 19, 4; 43-51
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Analysis of measurement errors of cvs method used for tests of pollutant emissions from light-duty vehicles
Autorzy:: Majerczyk, A.
Radzimirski, S.
Powiązania:: https://bibliotekanauki.pl/articles/242731.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
road transport
combustion engines
air pollution
environmental protection
Opis:: The test procedure for the pollutant emissions from light-duty vehicles is currently under verification carried out at the international level. For this purpose, GRPE (Groupe des rapporteurs sur la pollution et energie) – the body developing UNECE regulations proposals - has set up a task group WLTP (Worldwide harmonized Light vehicles Test Procedure) which is supposed to prepare a new GTR (Global Technical Regulation) relating to this procedure. The development of light-duty vehicles, leading to the reduction of pollutants emissions, caused the increase of the requirements for their test procedure. A large number of factors associated, inter alia, with the test equipment affects its accuracy, repeatability and reproducibility. In the ongoing analysis attention is paid even to factors, which affect test results in a relatively small way, and which have been overlooked yet. One of the problems to which attention is paid is the impact of pollutant concentration in the dilution air in the CVS (constant volume sampler) system on test results. The CVS principle is accepted as the standard method to determine light-duty vehicle exhaust emissions on chassis dynamometer test cells worldwide. It was introduced in the early 1970s. One of its drawbacks is that it introduces an error resulting from the fact that the contractual DF dilution factor, rather than the actual dilution ratio DR, is used for the correction of concentration measurement results. The article discusses this error for different type of engines used in light-duty vehicles and different pollutants subject to measurements.
Źródło:: Journal of KONES; 2013, 20, 4; 253-259
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "air environmental pollution" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język