Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "UV radiation" wg kryterium: Temat


Tytuł:
Badania laboratoryjne promieniowania UV wybranych energooszczędnych źródeł światła
Laboratory investigations of ultraviolet radiation of selected energy-saving light sources
Autorzy:
Baran, K.
Leśko, M.
Wachta, H.
Powiązania:
https://bibliotekanauki.pl/articles/157846.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
promieniowanie UV
świetlówka kompaktowa
Rozporządzenie Komisji Europejskiej
UV radiation
compact fluorescent lamp
European Commission Regulation
Opis:
W artykule przedstawiono problem związany z zastępowaniem źródeł żarowych przez źródła energooszczędne, głównie lampy fluorescencyjne, zgodnie z rozporządzeniem Komisji (WE) NR 244/2009. Promieniowanie ultrafioletowe emitowane przez źródła wyładowcze może stanowić zagrożenie dla użytkowników. Przeprowadzono badania sondażowe wybranych źródeł światła, które wykazały, że świetlówki dostępne na rynku nie stanowią istotnego zagrożenia ze względu na emisję UV, a produkty azjatyckie nie wykazują zwiększonego poziomu emisji w porównaniu do produktów europejskich.
In this paper there is presented the problem of replacing incandescent light sources by energy saving sources, especially by compact fluorescent lamps, in accordance with European Commission Regulation No 244/2009 [1]. Section 2 describes the principle of operation of a fluorescent lamp (Fig. 1). This lamp is a source of ultraviolet radiation (Tab. 1) [3] which can be a health threat for users. The UV spectrum has many effects, both beneficial and damaging, to human health. Section 3 characterizes these effects such as the production of vitamin D, the treatment of skin conditions, but also acute and chronic effects especially on the skin and eyes. Section 4 describes normative conditions of UV emission level and functionality conditions of compact fluorescent lamps according to the European Commission Regulation. Section 5 presents the detailed research method and results. There were measured two parameters: ultraviolet irradiance and illuminance, which were used to calculate the UV radiation emission level. For research there were used 20 W power compact fluorescent lamps with about 1200 lm luminous flux. The characteristics of UV emission depending on the radiating angle, the source distance and the voltage (Figs. 4-8) were obtained. There was performed a comparison of emission of different lamps, according to the producer, construction and color temperature (Figs. 9, 10). The research shows that the lamps offered in the market are not a crucial health threat for users, because their emission level is lower than that specified in regulations. Also the emission level of Asian products is not much higher than that of European products.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 10, 10; 1036-1039
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ promieniowania mikrofalowego oraz UV na właściwości hydrożeli chitozanowych
Influence of microwave and UV radiation on properties of chitosan hydrogels
Autorzy:
Bialik-Wąs, K.
Kudłacik, S.
Drabczyk, A.
Tyliszczak, B.
Powiązania:
https://bibliotekanauki.pl/articles/101311.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
hydrożele
chitozan
Beetosan
promieniowanie UV
promieniowanie mikrofalowe
hydrogels
chitosan
UV radiation
microwave radiation
Opis:
W prezentowanym artykule porównano wpływ promieniowania mikrofalowego oraz UV na przebieg reakcji sieciowania hydrożeli chitozanowych. Syntezy prowadzono zarówno w oparciu o chitozan komercyjny, jak i Beetosan - chitozan pochodzący z pszczół z osypu zimowego oraz dla układów mieszanych chitozan - Beetosan. Otrzymane materiały hydrożelowe zostały poddane badaniom zdolności pęcznienia i badaniom inkubacyjnym w wodzie destylowanej oraz symulowanych płynach ustrojowych. Ponadto, dla wybranych układów określono morfologię powierzchni przy użyciu skaningowego mikroskopu elektronowego. Wyznaczono również kąty zwilżania θ metodą geometryczną poprzez naniesienie kropli cieczy na powierzchnię badanego materiału.
In this paper, the impact on microwave radiation and UV cross-linking of the course of reaction of obtaining chitosan hydrogels was presented. The synthesis were conducted using either commercial chitosan and Beetosan - chitosan derived from naturally died honeybees as well as using mixed systems containing both chitosan and Beetosan. The swelling capacity of obtained hydrogel materials as well as their tendency to degradation in distilled water and simulated body fluid have been tested. Moreover, morphology of the surface of selected samples using scanning electron microscope was characterized. Furthermore, the contact angles (θ) of attained materials were defined using geometrical method by applying a drop of liquid on the surface of the tested material.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2016, II/2; 605-614
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność na starzenie wybranych tworzyw polimerowych i pigmentów
Resistance to ageing of chosen plastics and pigments
Autorzy:
Bieliński, M.
Sykutera, D.
Kościuszko, A.
Czyżewska, P.
Powiązania:
https://bibliotekanauki.pl/articles/278561.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
starzenie tworzyw polimerowych
promieniowanie UV
odporność pigmentów
polimer biodegradowalny
skala niebieska wełniana
ageing of plastics
UV radiation
resistance of pigments
biodegradable polymer
blue wool scale
Opis:
W niniejszej pracy przedstawiono porównanie odporności na oddziaływanie promieniowania UV wytworów wykonanych z polipropylenu i polilaktydu. W tych samych warunkach procesowi starzenia poddano próbki wtryskowe o zdefiniowanej odporności barwnika na światło. Ponadto potwierdzono przydatność niebieskiej skali wełnianej, do oceny wpływu oddziaływania promieniowania UV na zabarwione próbki polimerowe.
In this paper a comparison of resistance to UV radiation of containers made from polypropylene and polylactide was presented. Injection molded samples from plastics filled with pigments of defined resistance to the light were aged at the same conditions. Furthermore, the usefulness of the blue wool scale as the evaluation method of UV radiation impact on colored polymer samples was confirmed.
Źródło:
Przetwórstwo Tworzyw; 2016, T. 22, Nr 4 (172), 4 (172); 365-371
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Podwyższenie efektywności procesu wytwarzania kalki ceramicznej przez wprowadzenie mediów fotoutwardzalnych
Increasing of efficiency of ceramic transfer paper manufacturing process by means of addition of UV hardening media
Autorzy:
Biernat, M.
Powiązania:
https://bibliotekanauki.pl/articles/392472.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Ceramiki i Materiałów Budowlanych
Tematy:
kalka ceramiczna
proces wytwarzania
efektywność procesu
fotopolimeryzacja
utwardzanie UV
ceramic transfer paper
manufacturing precess
process efficiency
photopolymerisation
UV radiation hardening
Opis:
Omówiono badania realizowane w celu podwyższenia efektywności procesu wytwarzania kalki ceramicznej za pomocą wprowadzenia medium reagującego na promieniowanie UV. Szczególną uwagę poświęcono zagadnieniom wytwarzania past oraz laków błonotwórczych na bazie mieszanin zawierających dodatek mediów fotoutwardzalnych. Opisano problemy występujące w czasie utwardzania powłok farbowych i lakowych metodą fotopolimeryzacji oraz scharakteryzowano otrzymane kalki i gotowe dekoracje po procesie wypalania.
Research conducted in order to increase of the efficiency of manufacturing process of ceramic transfer paper by means of adding UV medium were discussed. The special attention to manufacturing of pasts and transfer wax on the basis of mixtures with addition of photohardening media was payed. Problems occurring in the photohardening of paint coating and transfer wax coating were described and the obtained transfer papers as well as finished decors after burning were characterized.
Źródło:
Prace Instytutu Szkła, Ceramiki, Materiałów Ogniotrwałych i Budowlanych; 2009, R. 2, nr 3, 3; 47-63
1899-3230
Pojawia się w:
Prace Instytutu Szkła, Ceramiki, Materiałów Ogniotrwałych i Budowlanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System informacyjny o słonecznym promieniowaniu UV W IMGW-PIB
Solar UV radiation information system at IMGW-PIB
Autorzy:
Biszczuk-Jakubowska, J.
Curyło, A.
Kois, B.
Zabłocki, G.
Powiązania:
https://bibliotekanauki.pl/articles/159800.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
słoneczne promieniowanie UV
solar UV radiation
Opis:
W ramach projektu badawczo-rozwojowego realizowanego w Ośrodku Aerologii IMGW-PIB opracowano system informacyjny o słonecznym promieniowaniu UV. System składa się z: Wyświetlacza LED prezentującego informacje o prognozie i bieżącej wartości Indeksu UV dla Legionowa.Tablica LED została zamontowana przy bramie wjazdowej na teren Ośrodka Aerologii IMGW-PIB. Systemu generującego pliki graficzne z informacją o prognozie i bieżącej wartości Indeksu UV prezentowane na stronie internetowej http://www.pogodynka.pl/indeksuv. Na stronie dostępne są produkty dla następujących miast: Łeba, Mikołajki, Legionowo, Katowice, Zakopane. Prezentowana jest również prognoza Indeksu UV dla całego obszaru Polski w postaci dwóch map: dla czystego i zachmurzonego nieba. Ponadto, na stronie dostępne są materiały edukacyjne o promieniowaniu UV.
An information system on solar UV radiation was developed in the frame of research and development project realized at the Centre of Aerology IMGW-PIB. The system consists of: LED display presenting information on the forecasted and current UV Index for Legionowo. LED display was mounted in front of Centre of Aerology IMGW-PIB. The system generating image files with information about the forecast and current UV Index displayed on the website http://www.pogodynka.pl/indeksuv. The site offers products for the following cities: Łeba, Mikołajki, Legionowo, Katowice, Zakopane. Also, UV Index forecast is presented for the Polish territory in the form of two maps: for clear and cloudy sky. Additionally, UV educational materials are available on the website.
Źródło:
Prace Instytutu Elektrotechniki; 2012, 255; 251-258
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
UVA radiation enhancement of beta-carotene yields in Rhodotorula mucilaginosa
Zwiększenie produkcji beta-karotenu w drożdżach Rhodotorula mucilaginosa pod wpływem promieniowania UVA
Autorzy:
Bogacz-Radomska, L.
Harasym, J.
Powiązania:
https://bibliotekanauki.pl/articles/5369.pdf
Data publikacji:
2016
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
UV radiation zob.ultraviolet radiation
ultraviolet radiation
beta-carotene
carotenoid
yield
Rhodotorula mucilaginosa
yeast
visible spectrum
VIS radiation zob.visible spectrum
Opis:
The influence of UVA and VIS radiation on the β-carotene biosynthesis by yeast Rhodotorula mucilaginosa was studied. The impact of radiation characteristic on biomass growth, substrate consumption and β-carotene production in submerged batch culture in bioreactor was studied. Three different types of light sources were used in the experiment: VIS – 15 W, wavelength range from 400 to 800 nm, the largest emission at 420 nm; UVA – 18 W, blue light, wavelength range of 350 to 430 nm, the largest emission at 370 nm; UVA – 20 W, wavelength range from 350 to 575 nm, the largest emission at 350 nm. In cultures conducted with UVA – 18 W radiation the highest β-carotene and carotenoids cellular concentration were achieved, respectively 63.20 μg/gd.w. and 0.97 mg/gd.w.. In cultures subject to VIS radiation a lower β-carotene concentration at 43.60 μg/gd.w. and the total carotenoids concentration at 0.83 mg/gd.w. was obtained. The ultraviolet radiation with the emission peak of radiation at 370 nm promoted the β-carotene and carotenoids production in yeast Rhodotorula mucilaginosa.
Badano wpływ promieniowania UVA i VIS na biosyntezę β-karotenu przez drożdże Rhodotorula mucilaginosa. Określano wpływ promieniowania charakterystycznego na wzrost biomasy, zużycie substratu i produkcję β-karotenu we wgłębnej hodowli okresowej prowadzonej w bioreaktorze. Zastosowano trzy różne rodzaje źródeł światła: VIS – 15 W, zakres długości fali od 400 do 800 nm, największa emisja przy 420 nm; UVA1 – 18 W, zakres długości fali od 350 do 430 nm, największa emisja przy 370 nm; UVA2 – 20 W, zakres długości fali od 350 do 575 nm, największa emisja przy 350 nm. W kulturach prowadzonych za pomocą promieniowania UVA otrzymano najwyższe stężenie β-karotenu i karotenoidów, odpowiednio 63,20 μg/gs.m. i 0,97 mg/gs.m. W hodowlach napromieniowanych lampą VIS uzyskano niższe stężenie β-karotenu (43,60 μg/gs.m) i karotenoidów (0,83 mg/gs.m). Promieniowanie ultrafioletowe ze szczytem emisji promieniowania przy 370 nm promowało produkcję β-karotenu i karotenoidów w komórkach drożdży Rhodotorula mucilaginosa.
Źródło:
Nauki Inżynierskie i Technologie; 2016, 3(22)
2449-9773
2080-5985
Pojawia się w:
Nauki Inżynierskie i Technologie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ promieniowania ultrafioletowego na wartość swobodnej energii powierzchniowej fotoczułej powłoki poli(amidoestroimidowej)
Influence of UV radiation on the value of free surface energy photosensitive poly(amidoestroimides) coating
Autorzy:
Borycki, J.
Firlik, S.
Molenda, J.
Powiązania:
https://bibliotekanauki.pl/articles/258123.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
promieniowanie ultrafioletowe
swobodna energia powierzchniowa
poli(amidoestroimidy)
powłoka fotoczuła
UV radiation
surface free energy
poly(amidoestroimides)
photosensitive coating
Opis:
Celem pracy było zbadanie wpływu promieniowania UV na wartość swobodnej energii powierzchniowej powłoki poli(amidoestroimidowej). Właściwości fotoreaktywne nadano polimerowi przez wprowadzenie do struktury cząsteczkowej polimeru ugrupowań metakrylowych. Po naniesieniu polimeru na odpowiednio przygotowane szklane podłoże poddano go imidyzacji termicznej, a następnie naświetlano promieniowaniem ultrafioletowym w zakresie 250-380 nm. Właściwości powierzchniowe powłok poli(amidoestroimidowych) przebadano, określając kąt zwilżania cieczy o znanej wartości swobodnej energii powierzchniowej. Na tej podstawie wyliczano wartość swobodnej energii powierzchniowej i jej składowych. Stwierdzono, że naświetlanie powłoki promieniowaniem ultrafioletowym powoduje wzrost swobodnej energii powierzchniowej, przy czym wraz z wydłużeniem czasu naświetlania rośnie jej składowa polarna, a maleje składowa dyspersyjna.
The aim of the work was to investigate the influence of UV radiation on the value of free surface energy of poly(amidoestroimides) coatings. The photoreactive properties were given to a polymer by introducing into molecular structure methacrylic groups. The polymer was thermally imidized after application on the appropriately prepared glass surfaces. After this, it has been UV irradiated (250-380 mm range). Values of free surface energy of poly(amidoestroimides) coatings were investigated by the determination of the contact angle of the standard liquid and the polymer surface. The value of the surface free energy and its components was calculated on this basis. It is concluded that UV radiation causes an increase of surface free energy. Elongation of UV radiation time causes an increase of polar components but a decrease of dispersion components.
Źródło:
Problemy Eksploatacji; 2008, 4; 17-23
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Gold Nanoparticles on the Photocatalytic Action of Titanium Dioxide in Physical-Chemical Parameters of Greywater
Autorzy:
Carbajal-Morán, Hipólito
Márquez-Camarena, Javier F.
Galván-Maldonado, Carlos A.
Powiązania:
https://bibliotekanauki.pl/articles/2025736.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
water pollution
solar UV radiation
AuNPs
programmable logic controller
Opis:
The objective of the work was to evaluate the influence of gold nanoparticles, obtained by laser ablation, on the photocatalytic action of titanium dioxide in the improvement of the physical-chemical parameters of domestic greywater, with visualization by means of a PLC. The YAG laser equipment was used for the production of spherical gold nanoparticles, whereas the Raman spectroscope allowed characterizing the different particles contained in aqueous solutions. The solar photoreactor programmable and viewable from PLC with connection to sensors allowed determining the variations of the pH, EC, DO and FCL parameters. The work consisted of a control group (greywater + titanium dioxide) and an experimental group (greywater + titanium dioxide + gold nanoparticles). The titanium dioxide doses for both groups were 0.5 mg/L and the gold nanoparticles were 0.20 ml per liter of greywater only for the control group. The experiments were carried out on sunny days with the exposure periods of 30 and 60 minutes around solar noon with an average UV index of 13.35. Once the experiments were carried out, it was determined that the pH improved by 5.30%, EC by 3.03%, DO by 29.3% and FCL by 43.71%, so that the gold nanoparticles dissolved in the aqueous solution of titanium dioxide with greywater positively influenced the improvement of the photocatalytic action of titanium dioxide in the physical-chemical parameters of greywater.
Źródło:
Journal of Ecological Engineering; 2022, 23, 1; 182-192
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wpływu starzenia promieniowaniem ultrafioletowym na strukturę i właściwości jakościowe różnobarwnych tasiemek polipropylenowych
Analysis of the impact of aging ultraviolet radiation structure and qualities multicolored ribbons of polypropylene
Autorzy:
Chłądzyńska, A.
Margol, M.
Kwiatkowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/279102.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
promieniowanie UV
starzenie
struktura
barwa
UV radiation
ageing
structure
colour
Opis:
W artykule przybliżono rodzaje polimerów, które stosowane są do wytwarzania tasiemek oraz środki pomocnicze - barwniki i stabilizatory. Zaprezentowano ponadto wytłaczarkę, przy pomocy której produkowane są tasiemki. Zwięźle opisano wyroby, które powstają z tasiemek polipropylenowych, jak również ogólne ich zastosowanie. W części badawczej przybliżono parametry procesu technologicznego. Próbki tasiemek na bazie polimerów syntetycznych poddano badaniu starzenia promieniowaniem UV, po czym zbadano ich strukturę i właściwość jakościową - barwę.
The article brought closer types of polymers, which are used to produce ribbons and additives - pigments and stabilizers. They presented further extruder with which tapes are produced. Briefly describe the products that are produced from polypropylene tapes, as well as their general use. In the research part approximated parameters of the process. Comp tapes based on synthetic polymers were subjected to UV aging, and examined its structure and property of quality - color.
Źródło:
Przetwórstwo Tworzyw; 2016, T. 22, Nr 4 (172), 4 (172); 200-209
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Tests of Temperature Effects on the Performance of Gan and Sic Photodiodes
Autorzy:
Ćwirko, J.
Ćwirko, R.
Mikołajczyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/221315.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
optical detectors
UV radiation
photodiode
GaN detector
SiC detector
Opis:
The paper presents a study of the performance of some selected UV detectors. Unlike many similar works, the obtained data refer to commercial photodiodes (not only to detector materials). The main task of the research was to determine the influence of the operating temperature and annealing on the detector spectral responsiveness. A comparison of the results obtained for the photodiodes made of GaN and SiC was also performed. Although both kinds of detectors can work at high temperatures for a long time, some modification of their properties was observed. However, for GaN and SiC photodiodes, this modification has a substantially different nature. It is very important for some applications, e.g. fire alarms and a military equipment.
Źródło:
Metrology and Measurement Systems; 2015, 22, 1; 119-126
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Laboratory Ageing on the Preservation of Anti-graffiti Properties for Paint Systems Used in Rolling Stock
Autorzy:
Garbacz, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2116440.pdf
Data publikacji:
2022
Wydawca:
Instytut Kolejnictwa
Tematy:
ageing tests
xenon-arc radiation
UV-C radiation
neutral salt spray
paint system
xenotest
gloss
colour
antigraffiti protection
rolling stock
Opis:
The article describes and presents the influence of selected ageing mechanisms of paint systems currently used in railways in Poland in the context of maintaining their original protective properties against graffiti. Six paint systems with different types of finish, which had anti-graffiti properties, were tested, and the characteristics of the surface of the paint system, such as gloss and colour, were determined after a series of painting and cleaning of graffiti (markers and sprays). The tested objects were subjected to artificial simulated ageing using laboratory solar radiation in a synergistic combination of temperature and humidity in accordance with PN-EN ISO 16474-2 and in accordance with the proprietary methodology described in DN 001/08/A2/16 section 4.1.8 using the UV-C radiation source (discrete spectrum). The tested samples were also subjected to a different type of ageing mechanism under strong corrosive conditions in the form of neutral salt spray according to the methodology described in PN-EN ISO 9227.
Źródło:
Problemy Kolejnictwa; 2022, 195; 97--116
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of UV-B radiations on the pigments of two Antarctic lichens of Schirmacher Oasis, East Antarctica
Autorzy:
Gautam, Sanghdeep
Singh, Jaswant
Bhushan Pant, Aditya
Powiązania:
https://bibliotekanauki.pl/articles/2051531.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Antarctica
UV−B radiation
lichens
carotenoids
phenolics
chlorophyll
Źródło:
Polish Polar Research; 2011, 3; 279-287
0138-0338
2081-8262
Pojawia się w:
Polish Polar Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of ageing on the structure and thermal properties of polymer composites with cardboard fiber
Wpływ starzenia na strukturę i właściwości termiczne kompozytów polimerowych z włóknem tekturowym
Autorzy:
Gnatowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/126613.pdf
Data publikacji:
2015
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
composites
thermal properties
cardboard fibre
structure
ultraviolet radiation ageing
recycling
kompozyty
właściwości cieplne
włókno tekturowe
struktura
starzenie promieniami UV
recykling
Opis:
In this work the results of investigations of thermal properties and structure PE-HD with addition of cardboard fibre before and after UV radiation ageing were presented. In this work composites with content of 1, 3, 5% of cardboard fibre in relation to the polyethylene have been produced. The investigations for the influence of the fillers on the properties of prepared composites before and after ultraviolet radiation ageing have been conducted. Investigations of crystallinity degree by means of DSC method as well as investigations of the structure using optical microscope have been conducted. The DSC investigations prove the decrease in the crystallinity degree of PE-HD during addition of cardboard fibre and increase for the samples after ultraviolet radiation ageing. While increasing the amount of cardboard fibre in the composite the Vicat softening temperature and absorptivity of water decreases for the samples before ultraviolet radiation ageing.
W pracy przedstawiono wyniki badań właściwości termicznych oraz struktury polietylenu o dużej gęstości i kompozytów polietylenu z włóknem tekturowym przed i po procesie starzenia promieniami UV. Zbadano stopień krystaliczności metodą DSC oraz strukturę za pomocą mikroskopu optycznego w świetle przechodzącym. Określono również temperaturę mięknienia wg Vicata oraz chłonność wody. Badaniom poddano kompozyty polietylenu o zawartości włókna: 1, 3 i 5%. Stwierdzono wpływ napełniacza na stopień krystaliczności, którego wartość maleje ze wzrostem zawartości włókna tekturowego zarówno przed, jak i po starzeniu promieniami UV. W przeprowadzonych badaniach zarejestrowano niższe wartości temperatury mięknienia wg Vicata i większą chłonność wody dla kompozytów polietylenu z włóknem tekturowym po starzeniu promieniami UV.
Źródło:
Proceedings of ECOpole; 2015, 9, 2; 451-457
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crosslink the Novel Group of Polymeric Binders BioCo by the UV-radiation
Autorzy:
Grabowska, B.
Kaczmarska, K.
Bobrowski, A.
Kurleto-Kozioł, Ż
Szymański, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/380418.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
UV radiation
spectroscopy
polymeric binder BioCo
BioCo
moulding sands
cross-linking
promieniowanie UV
spektroskopia
spoiwo polimerowe BioCo
masa formierska
Opis:
The spectroscopic FT-IR and FT-Raman methods allowed to identify the cross-linking process of the aqueous composition of poly(acrylic acid)/sodium salt of carboxymethyl starch (PAA/CMS-Na) applied as a binder for moulding sands (as a novel group binders BioCo). The cross-linking was performed by physical agent, applying the UV-radiation. The results of structural studies (IR, Raman) confirm the overlapping of the process of cross-linking polymer composition PAA/CMS-Na in UV radiation. Taking into account the ingredients and structure of the polymeric composition can also refer to a curing process in a binder - mineral matrix mixture. In the system of binder-mineral matrix under the influence of ultraviolet radiation is also observed effect of binding. However, the bonding process does not occur in the entire volume of the investigated system, but only on the surface, which gives some possibilities for application in the use of UV curing surface of cores, and also to cure sand moulds in 3D printing technology.
Źródło:
Archives of Foundry Engineering; 2016, 16, 2; 85-88
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System elektronicznego monitoringu parametrów środków ochrony indywidualnej
Electronic system for monitoring parameters of personal protective equipment
Autorzy:
Gralewicz, G.
Jachowicz, M.
Baszczyński, K.
Powiązania:
https://bibliotekanauki.pl/articles/181018.pdf
Data publikacji:
2010
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
środki ochrony indywidualnej
promieniowanie UV
promieniowanie IR
tworzywa sztuczne
personal protective equipment
UV radiation
plastics
Opis:
W artykule przedstawiono podstawowe informacje na temat czynników mogących spowodować uszkodzenia w środkach ochrony indywidualnej wykonanych z tworzyw sztucznych. Omówiono także sposób monitorowania wpływu niektórych zjawisk (różnorodność warunków środowiska) na zmianę parametrów ochronnych za pomocą elektronicznego systemu wbudowanego w środki ochrony indywidualnej.
This article presents basic information about factors that may damage personal protective equipment made of plastics. It discusses ways of monitoring the impact of some of those phenomena on the change in parameters with an electronic system built into personal protective equipment.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2010, 12; 16-18
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies