Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Szyb" wg kryterium: Temat


Wyświetlanie 1-49 z 49
Tytuł:
Dzieje szybu Daniłowicza
History of the Daniłowicz Shaft
Autorzy:
Charkot, Józef
Krzysztofek, Danuta
Powiązania:
https://bibliotekanauki.pl/articles/487372.pdf
Data publikacji:
2014
Wydawca:
Muzeum Żup Krakowskich Wieliczka
Tematy:
Historia
Szyb
Daniłowicz
wieliczka
budynek
History
Shaft
building
Opis:
The Daniłowicz shaft was deepened in the years 1635-42. The excavation drilling was completed at a time when the function of mine manager was held by Jan Mikołaj Daniłowicz, the Grand Treasurer of the Crown. Over 230 years it reached only to level 1 (64 m deep). In the second half of the nineteenth century it was deepened in stages to level 5 and in 1929 to level 6 (240.6 m deep). Throughout its history, the shaft was repeatedly modernized and served a variety of functions. For more than 200 years, it was used to draw large amounts of salt, mainly located in the solid deposit. As a  result of the work carried out with this shaft, most splendid chambers of the current tourist route and the most beautiful excavations of the underground exhibition of Wieliczka Cracow Saltworks Museum were created. Since the eighteenth century it also served the growing tourist traffic. After it was deepened and thoroughly modernized in the 1970s, it had only communication functions, serving both the crew and tourists. Since the beginning of the 1960s, its sole task is to serve the visitors of the Wieliczka mine. After the installation of air-conditioning in 1996 and a modern hoist (years 2011-12), every year it provides great comfort and safety to over one million tourists.
Źródło:
Studia i Materiały do Dziejów Żup Solnych w Polsce; 2014, 29; 7-32
0137-530X
Pojawia się w:
Studia i Materiały do Dziejów Żup Solnych w Polsce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Connecting Surveys and Orientation Measurements in Čsa 2 and Mír 5 Shafts
Pomiary połączenia i pomiary kierunkowe w szybach Čsa 2 i Mír 5
Autorzy:
Cernota, P.
Stankova, H.
Pospisil, J.
Novosad, M.
Muckova, J.
Powiązania:
https://bibliotekanauki.pl/articles/318491.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
GNSS technology
orientation measurement
CSA 2 shaft
Mir 5 shaft
technologie GNSS
pomiary kierunkowe
szyb CSA2
szyb Mir 5
Opis:
Connecting surveys and orientation measurements in the ČSA 2 and Mír 5 shafts were carried out in order to determine their positions in relation to each other and the positions of these two underground mining works in relation to structures situated on the surface. The measurements were carried out during the completion of the connecting underground crosscut between the Karviná and Darkov Mines, with an anticipated length of 3,100 metres. This is a very complex issue involving the most precise measurement and calculation techniques in mine surveying, especially as to achieving the necessary accuracy, which is mostly defined by the longitudinal and transverse deviations of the “cut-through” or “breakthrough”. The project engineer determined the required accuracy as a maximum deviation (longitudinal, transverse) of 0.250 metres for all cut-through options (special accuracy). The entire measurement process included surface measurements, depth measurements of both connected horizons (Mír 5: level 9, ČSA 2: level 11), connecting surveys and orientation measurements (using an MVT-2 gyrotheodolite), in accordance with Regulation of the Czech Mining Authority No. 435/1992 Coll. By analyzing the accuracy of the measurements, it was verified that the accuracy specified by Regulation of the Czech Mining Authority No. 435/1992 Coll. and required by the project had been achieved at all measurement stages. On 12 December 2012, both operating mines were connected underground at a depth of 870 metres, with positional accuracy of mx,y=0.011 m and height accuracy of mh=0.003 m.
Pomiary połączenia i pomiary kierunkowe w szybach Čsa 2 i Mír 5 zostały przeprowadzone w celu określenia ich położenia względem siebie oraz położenia tych dwóch podziemnych obiektów względem struktur na powierzchni. Pomiary przeprowadzono w okresie zakończenia projektu łączenia podziemnego przekopu pomiędzy kopalniami Karviná i Darkov o długości 3100 m. Jest to bardzo złożony problem obejmujący najbardziej precyzyjny pomiar i techniki obliczeniowe w miernictwie górniczym, głównie ze względu na potrzebę osiągnięcia wymaganej dokładności, która jest głównie określona przez wzdłużne i poprzeczne odchylenia przekopu i przecinki. Inżynier projektu określił wymaganą dokładność jako maksymalne odchylenie (wzdłużne, poprzeczne) równe 0,250 m dla wszystkich przekopów (dokładność specjalna). Cały proces pomiaru składał się z pomiaru powierzchni, pomiaru głębokości dwóch połączonych szybów (Mír 5:poziom 9, ČSA 2: poziom 11), pomiarów połączenia oraz pomiarów kierunkowe (przy użyciu giroteodolitu MVT-2) przeprowadzonych zgodnie z rozporządzeniem Czeskiego Urzędu Górniczego nr 435/1992. Poprzez analizę dokładności pomiarów potwierdzono, że dokładność określona w rozporządzeniu Czeskiego Urzędu Górniczego nr 435/1992 oraz ta wymagana w projekcie zostały osiągnięte we wszystkich etapach pomiarów. W dniu 12 grudnia 2012 obie kopalnie zostały połączone podziemnym tunelem o długości 870 m z dokładnością pozycyjną równą mx,y = 0,011 m oraz dokładnością wysokości równą mh = 0,003 m.
Źródło:
Inżynieria Mineralna; 2014, R. 15, nr 1, 1; 69-76
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Określenie położenia aparatury monitorującej w trakcie badań szybowych
Determination of site of monitoring equipment in the course of shaft researches
Autorzy:
Rotkegel, M.
Powiązania:
https://bibliotekanauki.pl/articles/340168.pdf
Data publikacji:
2004
Wydawca:
Główny Instytut Górnictwa
Tematy:
szyb
obudowa szybowa
głębokościomierz
shaft
shaft casing
depth gauge
Opis:
W artykule przedstawiono prosty i tani sposób określania położenia aparatury monitorującej w czasie badań stanu technicznego obudowy szybowej. Dysponując typowym komputerem PC możliwe jest określanie i rejestrowanie zmian położenia aparatury w czasie. Uzyskany z badań stanu technicznego obudowy materiał wizyjny może zostać zsynchronizowany z informacją o głębokości. W ten sposób możliwe jest uzyskanie obrazu stanu obudowy szybowej wraz z wyświetlanym komentarzem na temat głębokości. Tylko na podstawie takiego pełnego pakietu informacji możliwe jest dokonanie oceny stanu i ewentualne podjęcie działań mających na celu naprawę lub wzmocnienie obudowy.
In the article has been presented simple and cheap manner of definition of site of monitoring equip-ment during the research of technical condition of shaft casing. Having at disposal a typical computer is possible to definition and enrollment site of equipment in time. Received material, from casing technical states researches, can be synchronised with depth information. This way, it is possible to obtain an image of shaft casing technical state with displayed comment about its depth . Only on such, full package of information base it is possible effecting of technical state estimate and have possible taking an operation on purpose casing repair or reinforcement.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2004, 3; 7-16
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przemiany otoczenia nadszybia szybu Daniłowicza i w Parku Kingi w Wieliczce
Transformations of the Vicinity of Daniłowicz Shaft Headroom and the Park of St. Kinga in Wieliczka
Autorzy:
Ochniak-Dudek, Klementyna
Powiązania:
https://bibliotekanauki.pl/articles/1574417.pdf
Data publikacji:
2015
Wydawca:
Muzeum Żup Krakowskich Wieliczka
Tematy:
Daniłowicz
szyb
Park Kingi
Wieliczka
zmiany
Shaft
Park Kinga
transformations
Opis:
The paper focuses on reconstruction of changes occurring on the surface in the vicinity of the Wieliczka’s Daniłowicz Shaft from the beginning of its operation in the 17th century until the present times. It shows changes in the vicinity of the facility constituting, at the present moment, the most recognizable part of the above-ground infrastructure of the mine and the main place where tourist trac in Wieliczka is concentrated. It presents facilities which exist in the area between Daniłowicza Street (from the east) and Matejki Street and Kinga’s shaft headroom (from the west) and within the borders of plots belonging to the Wieliczka Salt Mine and Cracow Saltworks Museum Wieliczka. It mentions a number of shaft-adjoining buildings, residential houses, an employee bathhouse (the so-called Saltworks Bathhouse), public toilets, green areas, landscape architecture, including the decorative fence from the side of Daniłowicza Street. The issue of foundation and development (since 1870) of the present-day Park of St. Kinga was brought to attention in the article. This landscape-type park, established by the saltworks company as a specic form of a patronage project, harmoniously combined various production, transport, residential and social functions. Open to the public, it has evolved towards a spa park model in relation to intense tourist trac and sanatorium activities. The article touches upon the contemporary conservation problems related to the complex of above-ground facilities, which should be carefully protected as integral elements of the cultural heritage of the historical salt mine in Wieliczka. Protection of cultural landscape of this type is a great challenge – in the past, several historical buildings were demolished and in place of the disassembled authentic building of the so-called Saltworks Bathhouse, a new structure was erected for hotel purposes, making references to the picturesque forms of architecture from the beginning of the 20th century.
Źródło:
Studia i Materiały do Dziejów Żup Solnych w Polsce; 2015, 30; 7-32
0137-530X
Pojawia się w:
Studia i Materiały do Dziejów Żup Solnych w Polsce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rewitalizacja nadszybia szybu „Górsko” w kopalni soli „Wieliczka”
Revitalisation of the shaft top of mineshaft “Górsko” in “Wieliczka” salt mine
Autorzy:
Kokot, Bogdan
d’Obyrn, Kajetan
Kucharz, Jan
Powiązania:
https://bibliotekanauki.pl/articles/536089.pdf
Data publikacji:
2012
Wydawca:
Narodowy Instytut Dziedzictwa
Tematy:
budownictwo górnicze
rewitalizacja nadszybia
szyb "Górsko"
Wieliczka
zabytkowa kopalnia soli
Opis:
The article presents the historical context of the shaft top of mineshaft “Górsko” in the “Wieliczka” Salt Mine, the current condition of the building, and planned adaptation of the closed shaft top facility for service purposes. Construction works comprise operations to eliminate the destructive factors, stop the process of decay, restate the full aesthetical value of the elevation, and enable full use of the building.
Źródło:
Ochrona Zabytków; 2012, 3-4; 37-42
0029-8247
Pojawia się w:
Ochrona Zabytków
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pogłębianie szybu 8 KWK „Jankowice” perspektywą rozwoju kopalni po 2020 roku
Deepening the 8 shaft of „Jankowice” coal mine as a perspective of developening the mine after 2020
Autorzy:
Konsek, S.
Maciończyk, K.
Menżyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/113465.pdf
Data publikacji:
2016
Wydawca:
STE GROUP
Tematy:
szyb
budowa
pogłębianie
zasoby
przyszłość
shaft
building
deepening
resources
future
Opis:
Szyb 8 jest zasadniczym elementem modelu kopalni i oddanie go do eksploatacji umożliwiło likwidację szybu 6 łącznie z infrastrukturą oraz odblokowało zasoby uwięzione w filarze ochronnym. Głębienie szybu o średnicy 8,5 m rozpoczęto w listopadzie 1987 r., a zakończono w sierpniu 1991 r. Szyb zgłębiono do głębokości 731,76 m od zrębu szybu, równocześnie wykonując wlot jednostronny na poziomie 250 m i wloty dwustronne na poziomach 400 m, 565 m i 700 m. We wrześniu 2004 roku kopalnia uzyskała zezwolenie na ruch górniczego wyciągu szybowego w przedziale wschodnim, natomiast w pierwszej połowie 2006 roku zezwolenie na ruch górniczego wyciągu szybowego w przedziale zachodnim. W 2008 roku wybrano wykonawcę projektu koncepcyjnego budowy poziomów 880 i 1070 m oraz projektu techniczno-technologicznego pogłębienia szybu do poziomu 1103,7 m. W listopadzie 2010 r. rozpoczęto realizację wyrobisk technologicznych niezbędnych dla pogłębiania szybu 8, które zakończone zostały w styczniu 2013 r. Następnie prowadzone były prace związane z wykonaniem otworu wielkośrednicowego z poziomu 880 m do poziomu 731,76 m. Obecnie kopalnia realizuje umowę „Pogłębianie szybu 8 na odcinku od poz. 731,76 m do poziomu 1103,7 m z wykonaniem obudowy szybowej i dwoma dwustronnymi wlotami na poz. 880 m i 1070 m oraz zabudową zbrojenia szybowego dla KW S.A. Oddział KWK Jankowice”.
The 8 shaft is the fundamental element of a mine model and putting it into operation would make it possible to eliminate the 6 shaft including the infrastructure and unblock resources being trapped in a protective pillar. The process of deepening the shaft with 8,5 m diameter was started in November 1987 and finished in August 1991. The shaft has been 731,76 m deep – from the shaft framework, simultaneously a single-sided inlet at the level of 250m and double-sided inlets at the levels of 400 m, 565 m and 700 m has been done. In September 2004, the mine obtained permission to shaft hoisting motion in the eastern range whereas in the first half of 2006 in the western range. In 2008 the contractor for the conceptual project of building levels 880 and 1070 m as well as technical and technological project of shaft deepening to 1103,7 m level was chosen. In November 2010, the realisation of technological excavations indispensable to 8 shaft deepening was started. These actions were finished in January 2013. Next, the work was ongoing, which was connected with a large-diameter hole drilling from 880 m level to 731,76 m level. Currently, the mine is performing the contract “Deepening the 8 shaft on measuring distance from 731,76 m level to 1103,7 m level, together with making a shaft housing and two double-sided inlets on 880 m level and 1070 m level, and also inbuilding shaft reinforcement for the Coal Mine joint-stock company, Branch Jankowice Coal Mine”.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2016, 1 (13); 190-201
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Na jubileusz rekord głębokości zamrożenia szybu - GG-I
Autorzy:
Kulicki, J.
Biedrzycka, A.
Powiązania:
https://bibliotekanauki.pl/articles/365709.pdf
Data publikacji:
2010
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
budownictwo podziemne
kopalnia
szyb
wywiad
interview
mine
shaft
underground construction
Opis:
Wywiad z Jackiem Kulickim, prezesem zarządu Przedsiębiorstwa Budowy Kopalń PeBeKa SA.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2010, 2; 8-10
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The concept of applying the shaft inclinometer in verticality and rectilinearity measurements of shaft guides
Koncepcja wykorzystania inklinometru szybowego do określania pionowości i prostoliniowości prowadników szybowych
Autorzy:
Skulich, M.
Powiązania:
https://bibliotekanauki.pl/articles/385554.pdf
Data publikacji:
2008
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
geodezja
szyb
prowadnik
inwentaryzacja
inklinometr
surveying
shaft
guide
inventory
inclinometer
Opis:
The paper presents the structure, principle of making measurements and preliminary measurement results of a prototype instrument called shaft inclinometer, applied in the measurements of rectilinearity and verticality of shaft guides. Because of its safety and short time of measurement, the presented measurement technology i.e. the application of the shaft inclinometer, can make an alternative for the applied at present classical methods of the inventory of guides in mining shafts.
Artykuł przedstawia budowę, zasadę wykonywania pomiaru oraz wstępne wyniki badań prototypowego urządzenia o nazwie inklinometr szybowy, służącego do określania prostoliniowości i pionowości prowadników szybowych. Przedstawiona technika pomiarów z wykorzystaniem inklinometru szybowego ze względu na swoje bezpieczeństwo i krótki czas pomiaru może stanowić propozycję alternatywną dla stosowanych obecnie klasycznych metod inwentaryzacji prowadników w szybach górniczych.
Źródło:
Geomatics and Environmental Engineering; 2008, 2, 1; 67-76
1898-1135
Pojawia się w:
Geomatics and Environmental Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kontrolne pomiary geometrii obudowy szybu i elementów jego zbrojenia
Control measurements of geometry of shaft support and elements of its equipment
Autorzy:
Szot, M.
Powiązania:
https://bibliotekanauki.pl/articles/340458.pdf
Data publikacji:
2005
Wydawca:
Główny Instytut Górnictwa
Tematy:
szyb
obudowa szybu
zbrojenie szybu
shaft
shaft support
shaft geometry
Opis:
W artykule przedstawiono kryteria wykonywania kontrolnych pomiarów geometrii obudowy szybu i elementów jego zbrojenia, prostoliniowości torów prowadzenia naczyń oraz wartości luzów miedzy prowadnikami a roboczymi płaszczyznami prowadnic ślizgowych. Przedstawiono sposoby wizualizacji wyników pomiarowych i algorytm matematyczny wykonywania obliczeń. Zestawiono w liczbach dopuszczalne wartości parametrów obudowy i zbrojenia szybowego. Zdefiniowano pojęcie geometrii obudowy szybu. Wyniki pomiarów zostaną wykorzystane do wykonania obliczeń i analizy uzyskanych danych. Przeprowadzona analiza pozwala na wykazanie niezgodności skrajni ruchowych, jak i zmian geometrycznych parametrów ciągów prowadniczych.
In the paper are presented criteria of the performance of control measurements of the shaft support and elements of its equipment, rectilinearity of running of cages and clearances between guides and working surfaces of slideways. Ways of the visualisation of measurement results and mathematical algorithm of calculation conducting are presented. Permissible values of the shaft support and equipment were put together. The term "shaft geometry" was defined. Results of measurements will be used for calculations and analytical purposes. The performed analysis enable to show incompatibility of working limiting outlines and also geometrical changes of parameters guiding lines.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2005, 2; 73-81
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monitoring wychylenia wieży szybowej Szybu II w KWK „Borynia-Zofiówka” Ruch „Borynia”
Monitoring of the Inclination of Shaft II of Coal Mine „Borynia-Zofiówka” Plant “Borynia”
Autorzy:
Lubosik, Zbigniew
Skowronek, Tomasz
Zmarzły, Marian
Powiązania:
https://bibliotekanauki.pl/articles/1861229.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
kopalnia węgla
monitoring
szyb
drgania
wychylenia
coal mine
shaft
vibration
inclination
Opis:
W artykule przedstawiono wybrane wyniki monitoringu wychyleń wieży Szybu II KWK „Borynia-Zofiówka” Ruch „Borynia”. Monitoring realizowany był z wykorzystaniem opracowanego w Głównym Instytucie Górnictwa systemu monitoringu drgań i wychyleń opartego na laserowym czujniku drgań i wychyleń. Zaprezentowano wychylenia zarejestrowane w lipcu 2020 r. za pomocą czujników umieszczonych na wysokości kół linowych oraz na wysokości zastrzału Szybu II. Wychylenie mierzono w kierunkach E-W i N-S. Dokonano analizy wyników monitoringu wychyleń oraz wpływu temperatury na ich wartość.
The paper presents selected results of monitoring of inclination of Shaft II of Coal Mine “Borynia-Zofiówka” Plant “Borynia”. The monitoring was conducted by means of vibration and inclination monitoring system developed at Central Mining Institute which is based on the laser vibration and inclination sensor. The inclination results recorded in July 2020 by sensors placed at the height of the rope pulleys and on the strut were presented. The inclination was measured in E-W and N-S directions. The analyses of the inclination monitoring results and the influence of the temperature on its value were also performed.
Źródło:
Przegląd Górniczy; 2020, 76, 11-12; 16-23
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Innowacyjne rozwiązanie sztucznego dna szybu dla kopalni Jankowice
Innovative solution of artificial bottom of the mining shaft in Jankowice mine
Autorzy:
Gospodarczyk, P.
Stopka, G.
Szot, Ł.
Szot, M.
Powiązania:
https://bibliotekanauki.pl/articles/167568.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
górnictwo
bezpieczeństwo
szyb
sztuczne dno
mining industry
safety
shaft
artificial bottom
Opis:
W artykule przedstawiono problemy związane z koniecznością pogłębiania istniejących szybów i możliwościami dostosowania istniejących rozwiązań konstrukcyjnych sztucznych den szybów celem zapewnienia bezpiecznych warunków pracy załogi przy ich pogłębianiu. Sformułowano szczególne wymagania stawiane tego rodzaju konstrukcjom i na tym tle przedstawiono znane dotychczas rozwiązania sztucznych den szybów, oraz wnioski wynikające z analizy ich cech konstrukcyjnych w aspekcie możliwości przystosowania do tych wymagań. Wnioski doprowadziły do sformułowania potrzeby projektowej, dla której zaspokojenia opracowano w GIG w Katowicach i wdrożono w kopalni Jankowice innowacyjne rozwiązanie sztucznego dna szybu. Przedstawiono to rozwiązanie oraz przebieg prac projektowych i badawczych związanych z jego wdrożeniem. Interesującym aspektem prac projektowo-wdrożeniowych była weryfikacja rozwiązania konstrukcyjnego metodą symulacji komputerowej w Katedrze Maszyn Górniczych Przeróbczych i Transportowych AGH w Krakowie opisana w artykule, a także będącą przedmiotem zrealizowanego, w ramach Programu Badań Stosowanych finansowanego przez Narodowe Centrum Badań i Rozwoju, projektu, zatytułowanego: „Badania nad dyssypacją energii w mechanicznych układach ochronnych przewidywanych do stosowania w pogłębianych szybach kopalń podziemnych” (numer PBS1/A2/6/2012).
This paper presents the issues relating to the necessity of deepening the existing shafts as well as the possibilities of adopting the existing designing solutions of artificial bottoms of the mining shafts in order to ensure safe working conditions of the crew performing the deepening operations. Specific requirements for such designs have been founded, in the light of which the currently applied solution of artificial bottoms of the mining shafts as well as conclusions from the analysis of characteristics of their design, in the aspect of the possibilities of adapting to these requirements, presented. The conclusions have led to the need of designing an innovative solution of the artificial bottom of the shaft in Jankowice mine, by the Central Mining Institute. This solution as well as the process of developing the project and scientific works, related to its implementation, have been presented. The interesting aspect of the project and implementation management was the verification of the solution by use of computer simulation performed in the Department of Mining, Dressing and Transport Machines AGH in Kraków, described in this paper as well as being the subject of the implemented project in the framework of the Program of Applied Research funded by the National Centre for Research and Development, entitled: “Research on energy dissipation in mechanical protective systems for the use of deepening operations in the underground mining shafts” (no. PBS1/A2/6/2012).
Źródło:
Przegląd Górniczy; 2016, 72, 6; 78-84
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ nierówności prowadników szybowych na zmianę obciążeń lin wyciągowych - badania przemysłowe
Influence of shaft lines inequality on change of rope load - industrial research
Autorzy:
Szot, M.
Powiązania:
https://bibliotekanauki.pl/articles/340166.pdf
Data publikacji:
2004
Wydawca:
Główny Instytut Górnictwa
Tematy:
lina wyciągowa
maszyna wyciągowa
szyb "Kolejowy"
hoisting rope
hoisting machine
shaft Kolejowy
Opis:
Dotychczas nie wykonywano badań pozwalających na określenie wpływu stanu prowadzenia naczyń na zmianę obciążenia lin wyciągowych. Badania takie rozpoczęto w 2000 roku w Laboratorium Lin i Urządzeń Szybowych GIG. W artykule przedstawiono uzyskane wyniki badań w szybach górniczych. Jednak z uwagi na ich obszerność omówiono jedynie wybrane, opracowane wyniki badań obiektów. Obrazują one jak rodzaj prowadzenia naczyń i jego podstawowe parametry geometryczne wpływa na zmianę obciążenia lin wyciągowych nośnych. Szczegółowo omówiono wyniki badań prostoliniowości torów prowadzenia naczyń. Wyniki badań prostoliniowości torów prowadzenia naczyń i zmiany obciążeń w linach przedstawiono na wspólnych wykresach. Przeprowadzone badania wykazały, jak istotne jest zapewnienie właściwej geometrii toru prowadzenia naczyń, a także właściwa ich kontrola.
So far it do not execute the research allowing on influence determination of state of utensil conduct on change of rope load lines. It start such research in 2000 year in laboratory of rope and shaft lines fix-ups. In article it presented received results of research in mining shafts. However, due to its size, it discussed only chosen, processed results of objects research. They show as kind of utensil conduct and its basic geometric parameters effects change of load of carrying rope. It discuss detailed results of research in rectilinear gauge of utensil conduct. Results of research rectilinear gauge of utensil conduct and changes of loads in ropes it presented on common diagrams. Carried research have exerted as important be affirmation of proper geometry of gauge of utensil conduct, as well as its proper control.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2004, 3; 17-26
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Założenia systemu monitorowania szybów górniczych w świetle wybranych uszkodzeń obudów szybowych
Assumptions for systems monitoring shaft lining in the light of various defects
Autorzy:
Kleta, H.
Powiązania:
https://bibliotekanauki.pl/articles/113059.pdf
Data publikacji:
2017
Wydawca:
STE GROUP
Tematy:
szyb
obudowa szybu
monitoring obudowy szybów
shaft
lining shaft
monitorig lining shaft
Opis:
W artykule przedstawiono założenia systemu monitorującego stan obudowy szybów, uwzględniającego uwarunkowania techniczne tych wyrobisk górniczych w świetle spotykanych w praktyce górniczej rodzajów uszkodzeń obudowy. W przedstawionych założeniach dla systemu monitorującego stan obudowy uwzględniono uwarunkowania przestrzenne i środowiskowe występujące w szybach wraz z podaniem sposobów identyfikacji uszkodzeń obudowy i oceny bezpieczeństwa obudowy. Przedstawione założenia systemu monitorowania stanu obudowy szybów zostały zastosowane w realizowanym międzynarodowym projekcie badawczym Intelligent Deep Mine Shaft Monitoring.
The article presents the principles of the system monitoring the condition of the lining, taking into account the technical conditions of the mine workings in the light of the common practice of mining types of damage to the housing. In their assumptions for the system monitoring the condition of the housing includes spatial and environmental conditions occurring in the shafts, together with the ways to identify damage to housing and assessing the safety of housing. The assumptions of the system of monitoring the state of the housing shafts have been used in an international research project carried out Intelligent Deep Mine Shaft Monitoring.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2017, 6, 3; 92-100
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modernizacja stacji wentylatorów głównych szybu „Wilson” w KS „Wieliczka” S.A.
The modernization of the main fan station of the “Wilson” shaft in KS “Wieliczka” S.A.
Autorzy:
Pasek, Rafał
Rozwadowski, Krzysztof
Zuski, Zygmunt
Powiązania:
https://bibliotekanauki.pl/articles/2106539.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
szyb kopalniany
wentylatory główne
modernizacja
kopalnia soli
mine shaft
main fans
modernization
salt mine
Opis:
Artykuł omawia modernizację stacji wentylatorów głównych szybu „Wilson” w KS „Wieliczka” S.A., która objęła: budynek stacji, wentylatory główne, silniki elektryczne o mocy 110 kW do napędu wentylatorów, transformatory 3/0,4 kV, rozdzielnię 3 kV „Wilson”, rozdzielnię główną 0,4 kV oraz systemy komunikacyjne do sterowania stacją.
This article discusses the modernization of the “Wilson” shaft’s main fan station in KS “Wieliczka” S.A., which included: the station building, main fans, the 110 kW electric motors to drive the fans, 3/0.4 kV transformers, 3 kV “Wilson” switchgear, 0.4 kV main switchgear and the communication systems used to control the station.
Źródło:
Mining – Informatics, Automation and Electrical Engineering; 2021, 59, 3; 41-50
2450-7326
2449-6421
Pojawia się w:
Mining – Informatics, Automation and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The modernization of the main fan station of the “Wilson” shaft in KS “Wieliczka” S.A.
Modernizacja stacji wentylatorów głównych szybu „Wilson” w KS „Wieliczka” S.A.
Autorzy:
Pasek, Rafał
Rozwadowski, Krzysztof
Zuski, Zygmunt
Powiązania:
https://bibliotekanauki.pl/articles/2154900.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
mine shaft
main fans
modernization
salt mine
szyb kopalniany
wentylatory główne
modernizacja
kopalnia soli
Opis:
This article discusses the modernization of the “Wilson” shaft’s main fan station in KS “Wieliczka” S.A., which included: the station building, main fans, the 110 kW electric motors to drive the fans, 3/0.4 kV transformers, 3 kV “Wilson” switchgear, 0.4 kV main switchgear and the communication systems used to control the station.
Artykuł omawia modernizację stacji wentylatorów głównych szybu „Wilson” w KS „Wieliczka” S.A., która objęła: budynek stacji, wentylatory główne, silniki elektryczne o mocy 110 kW do napędu wentylatorów, transformatory 3/0,4 kV, rozdzielnię 3 kV „Wilson”, rozdzielnię główną 0,4 kV oraz systemy komunikacyjne do sterowania stacją.
Źródło:
Mining – Informatics, Automation and Electrical Engineering; 2021, 59, 3; 31-40
2450-7326
2449-6421
Pojawia się w:
Mining – Informatics, Automation and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ profilu prędkości powietrza na parametry przepływu dwufazowego w szybie wentylacyjnym
An influence of air velocity profile on the two-phase flow parameters in the ventilating shaft
Autorzy:
Branny, M.
Nowak, B.
Ptaszyński, B.
Kuczera, Z.
Łuczak, R.
Życzkowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/350186.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
przepływ dwufazowy
profil prędkości
szyb wentylacyjny
two-phase flow
velocity profile
ventilating shaft
Opis:
Często na długości szybu wydechowego występuje kilka dopływów wody spoza obmurza szybowego. W artykule opisano wyniki badania wpływu profilu prędkości powietrza na parametry przepływu dwufazowego w szybie wentylacyjnym dla przyjętego stałego wydatku wody dopływającej do przekroju poprzecznego szybu o średnicy kropel wody: 0,5 mm, 1 mm, 2 mm, 3 mm.
Several inflows of water beyond shaft brickwork occur frequently on the length of the upcast shaft. The article describes the results of influence of air velocity profile on the parameters of two-phase flow in the upcast shaft for accepting constant discharge of water flows to the cross-section of shaft with water drops diameter: 0,5 mm, 1 mm, 2 mm, 3 mm.
Źródło:
Górnictwo i Geoinżynieria; 2010, 34, 1; 29-39
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania i prognoza deformacji górotworu w rejonie szybu Św. Kingi w Kopalni Soli „Wieliczka”
Study of and research on rock mass deformation in the area of St. Kinga shaft in Wieliczka salt mine
Autorzy:
Hejmanowski, R.
Malinowska, A.
Obyrn, K. d'
Ulmaniec, P.
Kwinta, A.
Powiązania:
https://bibliotekanauki.pl/articles/164211.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
szyb górniczy
pomiary geodezyjne
przemieszczenia
deformacje
prognoza deformacji
mining shaft
surveying
displacements
deformation
deformation prognosis
Opis:
Przedmiotem artykułu są wyniki badań rozwoju ciągłych deformacji górotworu w rejonie szybu Św. Kingi w Kopalni Soli „Wieliczka” S.A.,w całym okresie istnienia szybu, tj od drugiej połowy XIX w. Ze względu na to, że szyb pierwotnie nie podlegał monitoringowi geodezyjnemu, badania zostały wsparte wynikami obliczeń modelowych. Wyniki obliczeń skonfrontowano dla okresu po 1985 r. (pierwsze pomiary geodezyjne w rurze szybowej) z wynikami pomiarów wysokościowych. Zgodność wyników modelowania i pomiarów pozwoliła na objęcie górotworu w rejonie szybu prognozą na okres 25 i 50 lat. Zaprezentowane analizy pozwoliły ocenić dotychczasowe zagrożenia wzdłuż rury szybowej. Wyniki prognozy dają możliwość odpowiednio wczesnego projektowania ewentualnych prac profilaktycznych w obudowie szybowej, jak również zabezpieczeń w komorach zlokalizowanych w rejonie szybu. Efektem wykonanych badań będzie zapewnienie informacji o warunkach stabilności szybu w perspektywie kolejnych 50 lat.
The results of the prognosis of continuous deformation in the region of the St. Kinga Shaft in Salt Mine “Wieliczka” SA have been presented. The prognoses were performed over the shaft lifetime (from the second half of the 19th century until 2013). The shaft has been measured since 1985 but deformations in that region occurred earlier. That is why the estimation of the total deformation around the shaft was reprognosed for the period preceding the year 1985. The results of the reprognosis were confronted with the results of measurements done in the shaft after 1985. Basing on the reprognosis and measurement results one could predict deformation that might have occurred around the shaft within 25 and 50 years. Current threats around the shaft could be assessed on the basis of the presented analyses. Besides, the reinforcement of the shaft could be designed and protection plans worked out for chambers located in the region of the shaft. The result of the calculations provided information on the stability conditions of the shaft for the next 50 years.
Źródło:
Przegląd Górniczy; 2014, 70, 8; 150-156
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Z dziejów poszukiwania i prób eksploatacji węgla brunatnego w Jerce (Wielkopolska)
The history of exploration and attempst at lignite mining in Jerka (Wielkopolska)
Autorzy:
Skoczylas, J.
Powiązania:
https://bibliotekanauki.pl/articles/164954.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
węgiel brunatny
szyb
otwór wiertniczy
kopalnia
ekspertyza
rzeczoznawcy
lignite
shaft
borehole mining
mine
expertise
appraisers
Opis:
Wobec powracających koncepcji rozpoczęcia odkrywkowej eksploatacji węgla brunatnego w południowej Wielkopolsce, w rejonie Poniec-Krobia, autor przypomniał dzieje poszukiwań wiertniczych węgla brunatnego w rejonie Jerki, Lubinia, Bieżyna i Bielawy. Poszukiwania te, w początkach XX wieku, mimo bardzo optymistycznych prognoz, nie doprowadziły do zyskownej eksploatacji. Bardzo korzystne dla potencjalnej inwestycji orzeczenia wydali trzej niemieccy, niezależni, eksperci Kriebitz, Butterlin i Krisch. Postulowali oni podjęcie natychmiastowych prac eksploatacyjnych, szacując roczne zyski na około pół miliona marek. Jednak budowa szybów i próby eksploatacji węgla brunatnego w rejonie Jerki nie zakończyły się sukcesem, a wręcz przeciwnie. Doprowadziły głównego sponsora Władysława Taczanowskiego do ruiny, a kierowaną przez niego spółkę do bankructwa w 1912 roku. Okres I wojny światowej i późniejszy nie sprzyjały kontynuacji wydobycia metodą podziemną tego cennego surowca energetycznego.
In the context of new concepts of starting lignite mining in the south of the Greater Poland, in the region of Krobia and Poniec, the author recalls the history of coal exploration and drilling in the area of Lubin, Bieżyń and Bielawa. Despite very optimistic forecasts, this exploration in the early twentieth century, has not led to a profitable exploitation. Very promising expertises for potential investors were released by three German independent appraisers: Kriebitz, Butterlin and Krisch. They postulated to begin immediate exploitation works and estimated the annual profits of about half a million marks. However, the construction of shafts and attempts at lignite mining in the area were not successful. On the contrary, the main sponsor, Władysław Taczanowski and his company went into bankruptcy in 1912. The period of World War I and on, did not favor the continuation of the underground mining method of this valuable energy source.
Źródło:
Przegląd Górniczy; 2016, 72, 2; 82-87
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dzieje Szybu Regis
History of the Regis shaft in Wieliczka
Autorzy:
Charkot, Józef
Gawroński, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/1574568.pdf
Data publikacji:
2012
Wydawca:
Muzeum Żup Krakowskich Wieliczka
Tematy:
Szyb
Wieliczka
Kopalnia Soli
Rewitalizacja
Urządzenia szybowe
Budowa szybu
Shaft
Salt Mine
Revitalization
Shaft machine
Shaft building
Opis:
The object of the study is the history of the oldest shaft – out of shafts that are still operating – of the Wieliczka Salt Mine. Hollowed out in the centre of the town in the middle of the 14th century, it continued to be the main mining shaft incessantly for approx. 600 years. It was the first shaft to be deepened below level I of the mine (18th century). Here, technical novelties in vertical transport were introduced and the first steam winding machine in Wieliczka was launched in 1861 and later an electric one (1912). The authors present the following issues in detail: construction and deepening of the shaft, modernization of winding machines, the salt mill and the surface infrastructure, changes in nomenclature and revitalization. Available historical sources were used, along with iconographic accounts, mining cartography and technical documentation. The Regis shaft, after completion of renovation work in 2012, started a “new life” contributing to streamlining of tourist traffic in the Wieliczka Salt Mine.
Źródło:
Studia i Materiały do Dziejów Żup Solnych w Polsce; 2012, 28; 7-30
0137-530X
Pojawia się w:
Studia i Materiały do Dziejów Żup Solnych w Polsce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sposób przewietrzania chwałowickiej kopalni od Donnersmarck-Grubbe po PGG S.A. KWK ROW Ruch Chwałowice
Way of venting the chwalowice main from DONNERSMARCK-GRUBBE to PGG S.A ROW coal mine in the Chwalowice mining region
Autorzy:
Pierchała, Adam
Czuga, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/1841096.pdf
Data publikacji:
2019
Wydawca:
STE GROUP
Tematy:
kopalnia Chwałowice
wentylacja
wentylatory głównego przewietrzania
szyb wentylacyjny
Chwalowice coal main
ventilation
main ventilation fans
ventilation shaft
Opis:
W artykule opisano krótką historię kopalni Chwałowice od momentu jej powstania w 1903r. do dnia dzisiejszego. Opisano zagrożenia naturalne i techniczne występujące przez okres istnienia zakładu górniczego. Przedstawiono sposób przewietrzania kopalni od dwóch bliźniaczych szybów i jednego wentylatora zabudowanego na dole kopalni, poprzez 4 szyby wdechowe i 6 szybów wydechowych po połączeniu kopalni Chwałowice i Rymer w 1995 r. po 3 szyby wdechowe i 2 szyby wydechowe funkcjonujące obecnie w KWK ROW Ruch Chwałowice.
The article describes a short history of the Chwalowice coal mine from its inception in 1903 to this day. Natural hazards and technical obstacles occurring during the existence of the mining plant have been described. The article presents the method of ventilation of the coal mine from two twin shafts and one fan installed undrground via 4 intake shafts and 6 exhaust shafts after connecting the Chwalowice and Rymer mines in 1995 to the 3 air intake shafts and 2 exhaust shafts currently operating at ROW coal mine in the Chwalowice mining region.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2019, 8, 1; 252-262
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Normatywne środki ochrony tymczasowej strefy pracy konserwatora dźwigów
Normative protection zone temporary work for service lifts
Autorzy:
Longwic, R.
Lotko, W.
Woźniak, G.
Szydło, K.
Powiązania:
https://bibliotekanauki.pl/articles/315340.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
pomiar hałasu
dźwig
szyb dźwigowy
ochrona tymczasowa
konserwator
normy
noise measurement
crane
temporary protection
conservator
standards
Opis:
W artykule przedstawione zostały rozwiązania mające na celu stworzenie tymczasowej strefy pracy konserwatora dźwigów w urządzeniach posiadających odstępstwo od wymaganych minimalnych wymiarów stref bezpieczeństwa w podszybiu i nadszybiu. Omówione zostały wymagania, które muszą spełniać producenci urządzeń dźwigowych, jak również opisane zostały środki tworzące tymczasową strefę bezpieczeństwa zgodne z normą PN-EN 81-21:2010.
The article presents solutions aimed at creating temporary zone of the work conservator of lifts in devices having a deviation from the required minimum size of safety zone in the pit and headroom. Discussed the requirements which to be met by manufactures of lifting equipment, as well as have been described means creating a temporary a safety zone in accordance with PN-EN 81-21:2010
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2016, 17, 6; 250-254
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Szyb wydobywczy Mittlau w Iwinach w początkach jego istnienia
The mining shaft Mittlau in Iwiny at the beginning of its existence
Autorzy:
Rybicka, Karolina
Powiązania:
https://bibliotekanauki.pl/articles/2037349.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
historia górnictwa
szyb
ruda miedzi
Iwiny
Dolny Śląsk
history of mining
shaft
copper ore
Lower Silesia
Opis:
Artykuł przedstawia historię szybu wydobywczego Mittlau w Iwinach od połowy lat 30. XX wieku do zakończenia II wojny światowej. Na tym terenie przeprowadzono prace badawcze, które miały na celu określenie zasobności złoża miedzionośnego. Dały one pozytywne rezultaty, więc podjęto decyzję o budowie szybu wydobywczego. Przedsięwzięcie zrealizowano na zlecenie koncernu Towarzystwo Górnicze Spadkobiercy Georga Gieschego (Bergwerks-Gesellschaft Georg von Giesches Erben) z Wrocławia. W pracy przytoczono okoliczności budowy szybu, wyboru miejsca, kosztów inwestycji, określono trudności geologiczne i hydrologiczne oraz przebieg prac budowlanych. Wyjaśniono także, dlaczego głębienie szybu przebiegało wolno w porównaniu do sąsiadującego z nim szybu Mühlberg.
The article presents the history of the Mittlau mining shaft in Iwiny from the 30s of the twentieth century to the end of World War II. Resaerch work conducted in this area was to determine the wealth of the copper deposit. The results of the research were positive, so the decision was made to build an extraction shaft. The project was commissioned by the concern Towarzystwo Górnicze Spadkobiercy Georg von Giesches from Wrocław. The work presents the circumstances of the shaft construction, site selection, investment costs, geological and hydrological difficulties and the course of consruction works. It also explained why sinking of the shaft was slow compared to the adjacent Mühlberg shaft.
Źródło:
Przegląd Górniczy; 2021, 77, 7-9; 40--43
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Contribution to the synergic impact of the stabilization intervention during pit deepening
Przyczynek do łącznego wpływu stabilizacji interwencyjnej gruntu podczas głębienia szybu
Autorzy:
Aldorf, J.
Hrubesova, E.
Sipek, P.
Powiązania:
https://bibliotekanauki.pl/articles/350076.pdf
Data publikacji:
2005
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
stabilizacja interwencyjna gruntu
głębienie szybu
szyb ucieczkowy
sieć kanalizacyjna
ground stabilization intervention
pit deepening
escape pit
sewage net
Opis:
This paper deals with the pit construction of the exit facility, which will serve as an escape router from a sewer collector located in front of the Imperial Hotel in the city centre of Ostrava. The design is based on ground stabilization by means of sheeting, nailing, and anchoring. The pit construction was executed within the project "The enlargement of the sewage network of Ostrava - Stage of construction II - City centre sewer collector - SO 024 escape route of the Imperial Hotel".
Tematem pracy jest budowa szybu ucieczkowego z kolektora ściekowego Hotelu Imperial w centrum Ostrawy. Projekt oparto na stabilizacji gruntu przy użyciu ekranu iniekcyjnego oraz kotwienia. Budowa szybu była wykonana w ramach projektu "Rozbudowa sieci kanalizacyjnej Ostrawy - Etap budowy II - Kolektor ściekowy centrum miasta - Droga ucieczkowa SO O24 z Hotelu Imperial"
Źródło:
Górnictwo i Geoinżynieria; 2005, 29, 3/1; 61-68
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mobilna Platforma Górnicza (MPG) - nowatorskim rozwiązaniem w polskich kopalniach
Mining Survey System (MSS) – innovative solution in polish mines
Autorzy:
Adamek, A.
Powiązania:
https://bibliotekanauki.pl/articles/131192.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
skanowanie laserowe
skaning mobilny
system pomiarowy
szyb górniczy
górnictwo
laser scanning
mobile scanning
measurement system
mining shaft
mining
Opis:
Technologia mobilnego skanowania laserowego rozwija się dynamicznie w górnictwie. Od kilku lat prowadzone są badania i testy nad zastosowaniem tego typu pomiaru w pracach inwentaryzacyjnych prowadzonych w szybach górniczych. Firma SKALA 3D w ramach projektu POIG Działanie 1.4 w PARP podjęła się stworzenia Mobilnego systemu automatycznego prowadzenia przestrzennych pomiarów geometrii szybów górniczych z wykorzystaniem technologii skanowania laserowego. Jego główną zaletą jest wierne odzwierciedlenie mierzonego obiektu w czasie zaledwie kilku godzin. System opiera się m.in. na danych płynących ze skanerów laserowych oraz precyzyjnej jednostki inercyjnej. Głównym problemem badawczym było wyznaczenie trajektorii przejazdu Mobilnej Platformy Górniczej (MPG) z jak największą dokładnością. Brak możliwości odbioru sygnału z satelitów w rurze szybowej uniemożliwiał wykorzystanie rozwiązań znanych z naziemnych pomiarowych systemów mobilnych. Firma SKALA 3D opracowała metodykę wyznaczenia trajektorii systemu w oparciu o dane geometryczne płynące ze skanerów laserowych oraz odczytów akcelerometrów i żyroskopów jednostki inercyjnej. Dla poprawy jakości i dokładności wykonywanych pomiarów MPG wyposażona została również w zestaw wibroizolatorów zapobiegający przenoszeniu się części drgań wstępujących podczas jazdy naczynia wyciągowego na układ pomiarowy. Całość tworzy skalibrowany system, który w krótkim czasie jest w stanie dostarczyć przestrzennych danych pomiarowych z mierzonego szybu. Dokładność pomiaru 2-3 mm w pojedynczym horyzoncie pomiarowym oraz kilka centymetrów wyznaczenia położenia punktu na tysięcznym metrze pod ziemią czynią go precyzyjnym. W trakcie realizacji projektu pojawiły się liczne problemy badawcze, m.in. konieczność zdefiniowania fizycznej referencji, dryf IMU, czy trudne warunki atmosferyczne w szybie. Firma SKALA 3D rozwiązała te problemy, co czyni MPG urządzeniem unikalnym w skali światowej.
Mobile laser scanning technology is developing rapidly also in mining. For several years research and tests are conducted on the use of that type of measurement in the inventory of the mine shafts. The company SKALA 3D in the project 1.4 POIG by PARP undertook to create Mobile automatic steering system of spatial geometry measurements mine shafts using laser scanning technology. Its main advantage is a faithful reflection of the object being measured in just a few hours. It is based on the data flowing from laser scanners and precision inertial unit. The main problem of the research was to determine the trajectory of the passing Mobile Platforms Mining (MPG) in the shaft as accurately as possible. Unable to receive signals from satellites in the pipe shaft prevented the use of solutions known for measuring terrestrial mobile systems. The company SKALA 3D has developed a methodology for determine the trajectory of the system, based on geometrical data coming from laser scanners and readings of accelerometers and gyroscopes of inertial unit. To improve the quality and accuracy of measurements MPG is also equipped with a set of anti-vibration parts prevent the transmission of vibrations ascending while cage is moving in the shaft on the measuring system. The whole forms a calibrated system, which in a short time is able to provide spatial measurement data from the measuring shaft. The accuracy of 2-3 mm in a single measurement horizon and a few centimeters determine the position of a point on the thousandth meter below ground make the system very accurate. During the project there have been numerous research problems, including the need to define the physical references, drift of IMU whether harsh weather conditions in the shaft. However, the company SKALA 3D solved these problems and making MPG unique in the world.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2015, 27; 11-24
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Internal mechanism of asymmetric deformation and failure characteristics of the roof for longwall mining of a steeply dipping coal seam
Autorzy:
Luo, Shenghu
Wang, Tong
Wu, Yongping
Huangfu, Jingyu
Zhao, Huatao
Powiązania:
https://bibliotekanauki.pl/articles/1853910.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odkształcenie
pokłady węgla
szyb kopalniany
steeply dipping seam
gangue
slip filling
deformation failure
main roof
angle effect
Opis:
Stability control of the roof is the key to safe and efficient mining of the longwall working face for a steeply dipping coal seam. In this study, a comprehensive analysis was performed on the roof destruction, migration, and filling characteristics of a steeply dipping longwall working face in an actual coalmine. Elastic foundation theory was used to construct a roof mechanics model; the effect of the coal seam inclination angle on the asymmetric deformation and failure of the roof under the constraint of an unbalanced gangue filling was considered. According to the model, increasing the coal seam angle, thickness of the immediate roof, and length of the working face as well as decreasing the thickness of the coal seam can increase the length of the contact area formed by the caving gangue in the lower area of the slope. Changes to the length of the contact area affect the forces and boundary conditions of the main roof. Increasing the coal seam angle reduces the deformation of the main roof, and the position of peak deflection migrates from the middle of the working face to the upper middle. Meanwhile, the position of the peak rotation angle migrates from the lower area of the working face to the upper area. The peak bending moment decreases continuously, and its position migrates from the headgate T-junction to the tailgate T-junction and then the middle of the working face. Field test results verified the rationality of the mechanics model. These findings reveal the effect of the inclination coal seam angle on roof deformation and failure and provide theoretical guidance for engineering practice.
Źródło:
Archives of Mining Sciences; 2021, 66, 1; 101-124
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Open pit slope stability analysis in soft rock formations at Thar Coalfield Pakistan
Autorzy:
Pathan, Shafi Muhammad
Pathan, Abdul Ghani
Siddiqui, Fahad Irfan
Memon, Muhammad Burhan
Soomro, Mairaj Hyder Alias Aamir
Powiązania:
https://bibliotekanauki.pl/articles/2203337.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
szyb górniczy
skała osadowa
modelowanie komputerowe
open pit slope stability
overall slope angle
Thar Coalfield
computer modelling
Opis:
Slope Stability Analysis is one of the main aspects of Open-pit mine planning because the calculations regarding the stability of slopes are necessary to assess the stability of the open pit slopes together with the financial feasibility of the mining operations. This study was conducted to analyse the effect of groundwater on the shear strength properties of soft rock formations and determine the optimum overall slope angle for an open pit coal mine at Thar Coalfield, Pakistan. Computer modelling and analysis of the slope models were performed using Slide (v. 5.0) and Phase2 (v. 6.0) software. Integrated use of Limit Equilibrium based Probabilistic (LE-P) analysis and Finite Element Method (FEM) based shear strength reduction analysis was performed to determine the safe overall slope angle against circular failure. Several pit slope models were developed at different overall slope angles and pore-water pressure ratio (Ru) coefficients. Each model was initially analysed under dry conditions and then by incorporating the effect of pore-water pressure coefficients of Ru = 0.1, 0.2, and 0.3 (partially saturated); finally, the strata were considered to be fully saturated. It was concluded that at an overall slope angle of 29 degrees, the overall slope will remain stable under dry and saturated conditions for a critical safety factor of 1.3.
Źródło:
Archives of Mining Sciences; 2022, 67, 3; 437--454
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of stabilizing highly thickened slurries for filling of flooded shafts
Zastosowanie stabilizujących mieszanin wysokozagęszczonych do likwidacji zatopionych szybów
Autorzy:
Kleta, H.
Plewa, F.
Strozik, G.
Powiązania:
https://bibliotekanauki.pl/articles/350550.pdf
Data publikacji:
2005
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
szyb kopalniany
likwidacja kopalń
mieszanina wysokozagęszczona
wymagania wytrzymałościowe
podsadzka
mine shaft
closure of mine
highly thickened slurries
strength requirements
Opis:
The paper presents the results of research on the use of highly thickened slurries for closure of abandoned shafts. Two fill slurry compositions were considered, i.e. mixtures of slag, fly ash, cement and water, one of them containing 15 and the other 30% of cement by mass. In the case of closure of a partially flooded shaft, the fill material or mixture of materials should possess the ability to solidify in a water environment, and after solidification must be proof against soaking and secondary liquefaction. The solidified fill material should also remain stable under the loads resulting from subsequent batches of fill material placed in the shaft. The laboratory test results and analyses showed that strength and strain parameters of the fill material depend not only on the composition of the mixture, but also on the way of transport (transport in stagnant water) and the curing environment - water or dry air environment. Numerical calculations of stress and strain state in the shaft plug performing the function of a revetment plug, conducted for increasing strengths of the fill material and increasing loads exerted on the plug by the thickening column of fill material poured in the shaft, allowed to determine the strength requirements and the technology of solidifying backfill utilized for shaft closures.
W artykule przedstawiono wyniki badań nad zastosowaniem mieszanin wysokozagęszczonych do likwidacji nieczynnego szybu. Rozpatrywano dwa rodzaje składów masowych mieszaniny podsadzkowej, a mianowicie mieszaninę żużlowo-popiołowo-wodną, w której zawartość cementu wynosiła 30%, oraz mieszaninę o zawartości cementu równej 15%. W przypadku likwidacji nieczynnego szybu częściowo wypełnionego wodą materiał zasypowy lub mieszanina materiałów powinny wykazywać zdolność do zestalania w ośrodku wodnym, a po zestaleniu posiadać odporność na rozmakanie lub wtórne upłynnienie. Zestalony materiał zasypowy powinien ponadto być stateczny również w warunkach obciążeń kolejnymi porcjami materiału zasypowego wprowadzanego do likwidowanego szybu. Z przeprowadzonych badań laboratoryjnych wynika, że parametry wytrzymałościowe i odkształceniowe zależą nie tylko od składu mieszaniny, ale również od sposobu transportu (transport w wodzie stojącej) oraz środowiska sezonowania - środowisko wodne lub powietrzno-suche. Wykonane obliczenia numeryczne stateczności szybowego korka oporowego, przeprowadzone dla narastającej wytrzymałości materiału podsadzki i zwiększających się obciążeń korka od narastającej kolumny podsadzkowej w szybie, pozwalają określać wymagania wytrzymałościowe i technologię wykonania podsadzki zestalającej w likwidowanym szybie.
Źródło:
Górnictwo i Geoinżynieria; 2005, 29, 3/2; 47-52
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining the Permissible Longwall Face Advance in the Protective Pillar Conditioning the Liquidation of a Mining Shaft
Autorzy:
Mielimąka, Ryszard
Kleta, Henryk
Powiązania:
https://bibliotekanauki.pl/articles/2064293.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
impact of mining exploitation
shaft lining
deformation of the shaft mine shafts
wpływ eksploatacji górniczej
szyb górniczy
deformacja górnicza
Opis:
The presented research subject involved the assessment of the possibility of mining operations within the area of shaft protection pillar with simultaneous liquidation of the shaft. In such a situation, the basic condition is to avoid damage to shaft lining, which can hinder or even prevent safe liquidation of the shaft by backfilling. The procedure to follow in order to assess the possibility and scope of mining exploitation within the shaft protection pillar is demonstrated on the example of shaft X. The applied assessment method involving the possibility and scope of mining exploitation within the protective pillar of the shaft was based on the forecast of rock mass deformation at the shaft site, which was the basis to calculate vertical stresses in the shaft lining and then to compare them with permissible values. The carried out calculations allowed us to determine the permissible face advance of longwall No. 5 at which no damage to the lining and its equipment would occur, ensuring the planned safe liquidation of the shaft by backfilling.
Źródło:
New Trends in Production Engineering; 2020, 3, 1; 69--82
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
1D resistivity inversion technique in the mapping of igneous intrusives; a step to sustainable quarry development
Autorzy:
Nwachukwu, M. A.
Nwosu, L. I.
Uzoije, P. A.
Nwoko, C. A.
Powiązania:
https://bibliotekanauki.pl/articles/970687.pdf
Data publikacji:
2017
Wydawca:
Główny Instytut Górnictwa
Tematy:
geo-electric
diabase
trial pit
land degradation
sustainability
Benue trough
diabaz
szyb badawczy
degradacja gruntu
rozwój zrównoważony
koryto Benue
Opis:
The use of trial pits as a first step in quarry site development causes land degradation and results in more failure than success for potential quarry investors in some parts of the world. In this paper, resistivity, depth and distance values derived from 26 Vertical Electric Soundings (VES) and 2 profiling inversion sections were successfully used to evaluate a quarry site prior to development. The target rock Diabase (Dolerite) was observed and it had a resistivity range of 3.0 x 10⁴ - 7. 8 x 10⁶ Ω-m, and was clearly distinguishable from associated rocks with its bright red color code on the AGI 1D inversion software. This target rock was overlain by quartzite, indurate shale and mudstone as overburden materials. The quartzite, with its off-red colour, has a resistivity range of 2.0 x 10³-2.9 x 10⁵ Ω-m, while the indurate shale, with a yellowish-brown colour, showed resistivity values ranging from 6.1 x 10² - 2.8 x 10⁵ Ω-m. Topsoil was clayey, with a resistivity range from 8 - 8.6 x 10²u Ω-m and depths of 0.3-1.8 m, often weathered and replaced by associated rocks outcrops. The diabase rock, in the three prospective pits mapped, showed thicknesses of between 40 and 76 m across the site. The prospective pits were identified to accommodate an estimated 2,569,450 tonnes of diabase with an average quarry pit depth of 50 m. This figure was justified by physical observations made at a nearby quarry pit and from test holes. Communities were able to prepare a geophysical appraisal of the intrusive body in their domain for economic planning and sustainability of the natural resource.
Źródło:
Journal of Sustainable Mining; 2017, 16, 4; 127-138
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mining equipment diagnostics in a mineshaft dewatering system – case study
Diagnostyka urządzeń górniczych w systemie odwodnienia szybu kopalni - studium przypadku
Autorzy:
Rogowski, Rafał
Werbińska-Wojciechowska, Sylwia
Powiązania:
https://bibliotekanauki.pl/articles/38938384.pdf
Data publikacji:
2023
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
maintenance
mining industry
pump maintenance
diagnostics
mine shaft
dewatering system
utrzymanie ruchu
przemysł górniczy
utrzymanie pomp
diagnostyka
system odwodnienia
szyb kopalni
Opis:
Maintenance issues in mines are particularly important due to the type and complexity of equipment in operation or working in hostile (even extreme) conditions. In this context, the need to ensure continuous/regular maintenance of machinery, identify potential hazards and ensure operational safety seems to be a challenge. Moreover, selecting an appropriate maintenance method is crucial for a mine, both economically and in technical/organizational terms. This study aims to present the preliminary results of diagnostic tests for pumps performing operational tasks in a mine shaft dewatering system. In addition, this study focused on a detailed discussion of the basic elements of the mine shaft dewatering system and the technical objects studied. A preliminary operational test plan for the investigated pumps operating in the mine shaft dewatering system is also presented. This enabled a discussion of the results obtained from the tests of the first quarter of 2023. The tests used three basic diagnostic methods: vibration analysis, thermal imaging and acoustic testing. Potential directions for further research in the analyzed area were also indicated.
Problematyka utrzymania ruchu w kopalniach jest szczególnie istotna ze względu na typ i złożoność eksploatowanych urządzeń czy pracę w nieprzyjaznych (wręcz ekstremalnych) warunkach operacyjnych. Wyzwaniem w tym kontekście jest konieczność zapewnienia ciągłych/regularnych napraw maszyn, identyfikacji potencjalnych zagrożeń oraz zapewnienia bezpieczeństwa pracy. W tym kontekście, dobór odpowiedniej metody utrzymania ruchu ma kluczowe znaczenie dla kopalni, zarówno w kontekście ekonomicznym jak i techniczno-organizacyjnym. Celem pracy jest więc przedstawienie wstępnych wyników badań diagnostycznych przeprowadzonych dla pomp realizujących zadania operacyjne w systemie odwodnienia szybu kopalni. W ramach realizacji celu pracy skupiono się na szczegółowym omówieniu podstawowych elementów systemu odwodnienia szybu kopalni oraz badanych obiektów technicznych. Przedstawiono również wstępny plan badań eksploatacyjnych dla badanych pomp, funkcjonujących w systemie odwodnienia szybu kopalni. Pozwoliło to na omówienie uzyskanych wyników badań, przeprowadzonych w pierwszym kwartale 2023 roku. Badania zostały opracowane z wykorzystaniem trzech podstawowych metod diagnostycznych: analizy drgań, termowizji oraz badań akustycznych. Wskazano również potencjalne kierunki dalszych prac badawczych w analizowanym obszarze.
Źródło:
Journal of KONBiN; 2023, 53, 3; 69-86
1895-8281
2083-4608
Pojawia się w:
Journal of KONBiN
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przejawy zagrożenia oraz efektu zabezpieczenia zabytkowego szybu Górsko Kopalni Soli Wieliczka w wynikach pomiarów geodezyjnych
Symptoms of threats and the effect of securing of the “Wieliczka” Salt Mine’s historic shaft “Górsko” in geodetic survey results
Autorzy:
Maj, Agnieszka
Kortas, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/1861221.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
kopalnia soli
zagrożenie wodne
przemieszczenia pionowe
pomiary niwelacyjne
Wieliczka
szyb „Górsko”
salt mine
water hazard
vertical displacements
leveling measurements
“Górsko” shaft
Opis:
Szyb Górsko jest siedemnastowiecznym szybem kopalni wielickiej, który został zasypany w 1954 roku. Na przełomie 2002 i 2003 roku przepływy wód opadowych doprowadziły do naruszenia stateczności budynku nadszybia, tworząc zagrożenie dla trwałości zabytku. Analiza wyników pomiarów niwelacyjnych, prowadzonych od 1 stycznia 2003 roku ujawniła zjawisko narastania przemieszczeń pionowych w bliskim sąsiedztwie szybu o zmiennej prędkości. Początkowo tempo obniżeń osiągało 350 mm/rok, a po likwidacji prawdopodobnych rozluźnień i ewentualnych wymyć w pobliżu ścian i fundamentów szybu prędkość przemieszczeń zmalała do niespełna 20 mm/rok. W 2012 roku, po wykonaniu kompleksowych prac uszczelniających szyb, tempo osiadania spadło do ok. 12 mm/rok, czyli do prędkości przemieszczeń wynikającej z wpływu zaciskania wyrobisk kopalnianych na powierzchnię terenu w sąsiedztwie szybu Górsko. Wyniki pomiarów geodezyjnych wskazują na opanowanie zagrożenia spowodowanego przepływem wód opadowych przez otoczenie szybu do wyrobisk kopalni.
The “Górsko” shaft is a seventeenth-century shaft of the “Wieliczka” Salt Mine, which was filled in 1954. At the turn of 2002 and 2003, rainwater flows led to a violation of the stability of the headroom building, creating a threat to the durability of the monument. Analysis of the results of leveling measurements conducted since January 1, 2003 revealed the phenomenon of increasing vertical displacements in close proximity to the shaft with a variable speed. Initially, the rate of subsidence reached 350 mm/year, and after the elimination of probable loosening and possible wash-outs near the shaft walls and foundations, the speed of displacement decreased to less than 20 mm/year. In 2012, after the comprehensive shaft sealing work, the subsidence rate dropped to approx. 12 mm/year, i.e. to the speed of displacement resulting from the impact of mine workings closing on the surface of the area in the vicinity of the “Górsko” shaft. The results of geodetic measurements indicate control of the threat caused by the flow of rainwater through the surroundings of the shaft to the mining goafs.
Źródło:
Przegląd Górniczy; 2020, 76, 6; 42-47
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Górnicze metody zabezpieczania wyrobisk kopalń Wieliczki i Bochni przed zagrożeniem zawałowym
Mining methods of protecting the excavations of Wieliczka and Bochnia mines against the cave-in hazard
Autorzy:
Charkot, Józef
Powiązania:
https://bibliotekanauki.pl/articles/2055007.pdf
Data publikacji:
2021-12-10
Wydawca:
Muzeum Żup Krakowskich Wieliczka
Tematy:
kopalnia
szyb
chodnik
komora
zabezpieczanie
obudowa
kaszt
podsadzka
a mine
a shaft
a gallery
a chamber
securing
timbering
a box-crib
filling material
Opis:
Eksploatacja soli w kopalniach Wieliczki i Bochni wymagała systematycznego prowadzenia prac zabezpieczających. Na przestrzeni wieków zmieniano lub modyfikowano metody ich realizacji. W artykule przedstawiono sposoby zabezpieczania poszczególnych rodzajów wyrobisk: szybów, szybików, chodników i komór. Szyby od XIII do XIX w. miały z reguły obudowę drewnianą i prostokątny przekrój. Od początku XX w. nowo zgłębiane szyby otrzymywały obudowę murowaną. Wymieniano również obudowy drewniane na murowane. Szybiki na odcinkach przechodzących przez pokłady i bryły soli oraz zwięzłe skały płonne pozostawiano bez obudowy, inne zabezpieczano obudową drewnianą. Chodniki w bardzo dobrych warunkach geologicznych nie wymagały zabezpieczeń, jednak w zdecydowanej większości posiadają różnorodne odmiany obudowy drewnianej. Pierwotnym, powszechnie stosowanym sposobem zabezpieczania komór było pozostawianie solnej łuski ochronnej. W rozległych komorach już od XIV w. stawiano filary solne. Od tego stulecia budowano również kaszty. Od początku działalności górniczej jednym ze sposobów ochrony komór przed destrukcją było ich podsadzanie. Do XVIII w. podsadzkę stanowił urobek pozyskiwany podczas prac podziemnych (skały płonne, zanieczyszczona sól). W Wieliczce w XIX w. rozpoczęto jej transport z powierzchni. Początkowo była to ziemia, a od początku XX w. piasek. Systematyczne podsadzanie piaskiem na sucho prowadzono do II wojny światowej, incydentalnie w latach 60. XX w. Od lat 80. tego stulecia prowadzi się podsadzanie hydrauliczne. W ten sposób zabezpieczono zasadniczą część wyrobisk, które nie zostały objęte ochroną konserwatorską.
The exploitation of salt in the Wieliczka and Bochnia mines required systematic protection works. Over centuries, the methods of their implementation have been changed or modified. The article presents methods of securing specific types of mine workings: shafts, pit-holes, galleries and chambers. Between the thirteenth and nineteenth century, shafts generally had a timbering and a rectangular cross-section. It was at the beginning of the 20th century that newly sunk shafts started to receive a brick lining. Timbering was also replaced with brick lining. Within sections passing through the deposits and blocks of salt as well as compact waste rocks, pit-holes were left without timbering, while others were secured with it. In very good geological conditions, galleries did not require any protection, however, the vast majority of them have various types of timbering. The original, commonly used method of securing chambers was to leave salt protective slices. Salt pillars had already been erected in large chambers since the 14th century. It is also then that the first box-cribs were built. From the beginning of mining activity, one of the methods of protecting the chambers from destruction was to backfill them. Until the 18th century, the filling material consisted of the output obtained in the course of underground works (waste rocks, contaminated salt). In Wieliczka its transport from the surface started in the 19th century. Initially, it was earth, and from the beginning of the 20th century – sand. Systematic dry backfilling had been carried out until World War II, and incidentally in the 1960’s. Hydraulic backfilling has been carried out since the 1980’s. That is how the essential part of the excavations, which were not under conservation protection, was secured.
Źródło:
Studia i Materiały do Dziejów Żup Solnych w Polsce; 2021, XXXV, 1; 128-199
0137-530X
Pojawia się w:
Studia i Materiały do Dziejów Żup Solnych w Polsce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The identification of selected window energy parameters in winter and summer periods in the Greater Poland region
Identyfikacja wybranych parametrów energetycznych okien w okresie zimowym i letnim w regionie Wielkopolski
Autorzy:
Błaszkiewicz, Z.
Kneblewski, P.
Powiązania:
https://bibliotekanauki.pl/articles/336284.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
windows
panes
window angle
gain
losses
heat balance
summer
winter
okna
liczba szyb
kąt ustawienia
zysk
straty
bilans cieplny
okres letni
okres zimowy
Opis:
The simulation research results of gains, losses and heat balance of two-, three- and four-paned windows positioned at 30, 60 and 90° angles relative to a surface for climatic conditions in Poznań and the Greater Poland region expected in the eco-power industry have been presented. It has been shown that in a summer period the increase in a number of panes and the angle of widows decreases high solar heat gain which determines similar alternations of heat balance at low losses. Particularly high window heat balance occurs from May to August due to high sun exposure at low heat losses. In winter, window heat balance is generally positive, apart from December, when it is minor and negative due to the lowest solar radiation at not the lowest outdoor temperature. Increasing a number of panes and a window angle does not change significantly window heat balance in a winter period.
Przedstawiono oczekiwane w ekoenergetyce wyniki badań symulacyjnych zysków, strat i bilansu cieplnego okien 2-, 3- i 4- szybowych ustawionych pod kątami 30, 60 i 90° względem podłoża, dla warunków klimatycznych Poznania i regionu Wielkopolski. Wykazano, że w okresie letnim wzrost liczby szyb i kąta ustawienia okien zmniejsza wysokie zyski ciepła, które przy niskich stratach determinują podobne zmiany bilansu cieplnego. Szczególnie wysoki bilans cieplny okien występuje w okresie od maja do sierpnia wskutek wysokiego nasłonecznienia przy niskich stratach ciepła. W okresie zimowym bilans cieplny okien jest ogólnie dodatni z wyjątkiem grudnia, kiedy jest nieduży i ujemny z powodu najniższej emisji promieniowania słonecznego przy nie najniższych temperaturach zewnętrznych. Zwiększanie liczby szyb i kąta ustawienia nie zmienia znacząco bilansu cieplnego okien w okresie zimowym.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2018, 63, 1; 8-12
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on launching technology of shield tunnel in Ho Chi Minh Metro line 1
Autorzy:
Nguyen, Xuan Loi
Wu, Li
Nguyen, Khanh Tung
Bui, Quang Anh
Nguyen, Huy Hoang
Luu, Hoang Phuong
Powiązania:
https://bibliotekanauki.pl/articles/1853628.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ho Chi Minh Metro
maszyna tarczowa
uruchomienie
szyb
poprawa gleby
opad atmosferyczny
miękkie oko
shield machine
launching
shaft
soil improvement
precipitation
soft eye
Opis:
The use of subway tunnel engineering technology has become more professional and refined with the growth of society and the advancement of science and technology. The initial construction process of a subway tunnel shield is the most critical part of the entire engineering system. Shield launching period construction is the most prone to accidents in the shield construction process, directly related to the smooth through the shield tunnel. The line 1 of Ho Chi Minh (HCM) Metro is the first subway line, the full length of 19.7 km, the underground road length of 2.6 km from km 0 + 615 to km 2 + 360, from Ben Thanh market, and then through the Sai Gon river and 14 station (including 3 underground stations and 11 elevated stations), reach Suoi Tien park and is located in Long Binh area station, underground building blocks including Ben Thanh market station to Opera House station interval, Opera House station, Opera House station to Ba Son station interval. This paper selects Shield launching period of Opera House station to Ba Son shaft interval as an example, analyze the key construction technology, construction control parameters and launching considerations of shield machine.
Źródło:
Archives of Civil Engineering; 2021, 67, 1; 387-401
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena i klasyfikacja zagrożenia wybuchem pyłu węglowego w szybach kopalń węgla kamiennego
Assessment and classification of the danger of coal dust explosion in mineshafts which mine the carbon coal
Autorzy:
Cybulski, K.
Michałek, A.
Powiązania:
https://bibliotekanauki.pl/articles/165012.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
szyb
wyrobiska pochyłe o nachyleniu powyżej 45°
pył węglowy
klasyfikacja szybów
mine shaft
sloped excavation of gradient of 45°
coal dust
classification of mineshafts
Opis:
Przepisy zawarte w Rozporządzeniu Ministra Spraw Wewnętrznych i Administracji z dnia 14 czerwca 2002 r. w sprawie zagrożeń naturalnych w zakładach górniczych wraz z późniejszymi zmianami nie uwzględniają specyficznej konstrukcji szybów. Odpowiednia klasyfikacja szybów jest niezbędna ze względu na występowanie w nich potencjalnych inicjałów, które mogą spowodować wybuch pyłu węglowego. Rozporządzenie Ministra Środowiska z dnia 29 stycznia 2013 r. w sprawie zagrożeń naturalnych w zakładach górniczych wprowadza kryteria klasyfikacji zagrożenia wybuchem pyłu węglowego w wyrobiskach pionowych oraz w wyrobiskach pochyłych o nachyleniu powyżej 45°, w tym w szybach i szybikach. Klasyfikację ww. wyrobisk będzie się dokonywać w oparciu o: –zawartość części niepalnych stałych w zalegającym pyle kopalnianym, – średnią ilość pyłu węglowego zalegającego w danym wyrobisku w przeliczeniu na 1 m3 wyrobiska, – klasyfikacje pod względem zagrożenia wybuchem pyłu węglowego oraz wielkość intensywności osiadania pyłu w wyrobiskach mających bezpośredni kontakt z rozpatrywanym wyrobiskiem, – ocenę zagrożenia wybuchem pyłów w budynku nadszybia – w przypadku klasyfikacji szybów.
The rules included in the Regulation of the Minister for Internal Affairs and Administration dated 14 June 2012 on Natural Hazards in Mining with later changes do not take into account the specific construction of mineshafts. The proper classification of shafts is necessary because of the occurrence of potential initials in the shafts which can cause explosion of coal dust. Regulation of the Minister for Environment dated 29 January 2013 on Natural Hazards in Mining introduces the criteria of the evaluation of danger of coal dust explosion in vertical excavations and in sloped excavations of the gradient of 45 degrees including mineshafts and winze. The division of the above mentioned excavations will be made on the basis of: - content of the fixed non-flammable parts in the residual mine dust, - the average amount of the residual coal dust in the particular excavation calculated per one cubic meter of this excavation, - classification in terms of the danger of coal dust explosion and the size of intensity of dust subsidence in excavations which have direct contact with the considered excavation, - the evaluation of the danger of dust explosion in the building of the headroom - in case of excavations’ classification. The new Regulation of the Minister for Environment dated 29 January 2013 will create the division of vertical excavations and sloped excavations of the gradient of 45 degrees, including mineshafts and winze, into those which are and those which are not at risk of coal dust explosion if at least one of the three conditions specified in the above mentioned Regulation, will be fulfilled. For many years the problem of danger of coal dust explosion in mineshafts is dealt by the Department of Anti-Aerosol Threats of the Experimental Mine “Barbara” owned by the Central Mining Institute which conducted the necessary research, developed and described the methods of charging mining dust samples into mineshafts.
Źródło:
Przegląd Górniczy; 2015, 71, 7; 16-20
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wdrożenie iniekcji strumieniowej w Kopalni Soli „Wieliczka” SA
Autorzy:
Gonet, A.
Stryczek, S.
Źróbek, M.
Powiązania:
https://bibliotekanauki.pl/articles/365201.pdf
Data publikacji:
2015
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
geotechnika
Kopalnia Soli Wieliczka
budowa geologiczna
warunki hydrogeologiczne
uszczelnianie
szyb
technologia iniekcji strumieniowej
geotechnics
Wieliczka Salt Mine
geological structure
hydrogeological conditions
sealing
shaft
Opis:
Istniejące warunki geologiczne i hydrogeologiczne połączone z ponad siedmiowiekową działalnością człowieka doprowadziły do powstaniu wielu dopływów wody do Kopalni Soli „Wieliczka”. Dzięki prowadzonym od wielu lat pracom zabezpieczającym kopalnię udało się opanować nawet katastrofalne wycieki, jakim był np. dopływ z poprzeczni Mina w 1992 r. [1]. Jedną z ostatnio zakończonych prac zabezpieczających było uszczelnienie obudowy szybu Kościuszko przy zastosowaniu iniekcji strumieniowej (jet grouting).
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2015, 6; 94-97
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantification of heat balance for windows with varying numbers of window panes and geographical exposure in the climate of the Wielkopolska region
Kwantyfikacja bilansu cieplnego okien o różnej liczbie szyb i orientacji geograficznej w warunkach klimatycznych Wielkopolski
Autorzy:
Błaszkiewicz, Z.
Rybacki, P.
Kneblewski, P.
Powiązania:
https://bibliotekanauki.pl/articles/337209.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
window
heat balance
number of window panes
exposure
summer period
winter period
okna
bilans cieplny
liczba szyb
orientacja geograficzna
okres letni
okres zimowy
Opis:
The paper presents results of simulation tests for the heat balance of double, triple and quadruple glazed windows with eastern, southern, western and northern exposure, conducted for the climate conditions of the city of Poznań and the Wielkopolska region in response to the needs of eco power engineering. It was shown that in the summer period a greater number of window panes and a change in exposure from southern to eastern, western and northern result in a considerable reduction of heat balance for these windows. In the summer months from May to August heat balance of windows with eastern, southern and western exposure is comparable. The heat balance of windows with the northern exposure is much lower in each month of the summer period. In the winter period the highest and positive heat balance is recorded for windows with the southern exposure. Windows facing the other geographical directions have a comparable balance with values around zero. At all the exposures an increased number of window panes to a relatively limited extent improves heat balance, in general for the entire winter period and in its individual months.
Streszczenie Przedstawiono wyniki badań symulacyjnych bilansu cieplnego okien 2-, 3- i 4-szybowych ustawionych na wschód, południe, zachód i północ dla warunków klimatycznych Poznania i regionu Wielkopolski oczekiwane w ekoenergetyce. Wykazano, że w okresie letnim wzrost liczby szyb i zmiana ustawienia okien z południa na wschód, zachód i północ powodują znaczne zmniejszanie bilansu cieplnego okien. W miesiącach okresu letniego od maja do sierpnia bilans cieplny okien zorientowanych na wschód, południe i zachód jest zbliżony. Bilans okien skierowanych na północ jest znacznie niższy w każdym miesiącu okresu letniego. W okresie zimowym najwyższy i dodatni bilans cieplny mają okna skierowane na południe. Okna zorientowane na inne kierunki mają podobny bilans cieplny i oscylujący około zera. Przy wszystkich zorientowaniach geograficznych okien zwiększana liczba szyb dość mało polepsza bilans cieplny ogólnie w okresie zimowym i w poszczególnych jego miesiącach.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2018, 63, 4; 31-37
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stress and deflection in multi-glazed IGUs of various dimensions
Naprężenia i ugięcia w wielokomorowych szybach zespolonych o różnych wymiarach
Autorzy:
Respondek, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/2175040.pdf
Data publikacji:
2021
Wydawca:
Politechnika Częstochowska
Tematy:
glass in building
insulating glass units
climatic loads
stress and deflection of glass panes
szkło w budownictwie
szyby zespolone
obciążenia klimatyczne
naprężenie i ugięcie szyb
Opis:
In the structure of insulating glass units (IGUs) there are gas-filled gaps. Therefore, changes in atmospheric pressure and temperature, as well as the action of wind, result in a load on the component glass panes. However, the deflection of the panes connected with climatic loads results in an interaction of the gas closed in the gaps, which partially reduces climatic influences. The aim of this article is to analyze the influence of IGUs dimensions on the maximum stresses and deflections in the component glass panes, also in the context of the use of multi-glazed IGUs. Three typical loads were analyzed. It was found that in the case of wind load, with increasing dimensions of the IGUs, the stresses and deflections increase. On the other hand, in the case of loads related to pressure and temperature changes, in large-size IGUs, the gas interaction in the gaps is significant, which reduces the resultant load on the panes. It has been shown that there are critical IGU dimensions here for which the stress and deformation ratio are greatest. It was also found that increasing the number of gaps in IGUs results in a significant increase in the stress and deflection values due to climatic loads.
W konstrukcji szyb zespolonych (IGUs) istnieją szczelne szczeliny wypełnione gazem. W związku z tym zmiany ciśnienia atmosferycznego i temperatury, a także działanie wiatru skutkują obciążeniem składowych płyt szklanych. Jednak związane z obciążeniami klimatycznymi ugięcie płyt skutkuje interakcją gazu zamkniętego w szczelinach, która częściowo redukuje te wpływy klimatyczne. Celem artykułu jest analiza wpływu wymiarów IGUs na maksymalne naprężenia i ugięcia w szybach składowych, również w kontekście stosowania szyb wielokomorowych. Analizowano trzy typowe obciążenia. Stwierdzono, że w przypadku obciążenia wiatrem przy zwiększaniu wymiarów IGUs naprężenia i ugięcia rosną, natomiast w przypadku obciążeń związanych ze zmianami ciśnienia i temperatury w szybach wielkowymiarowych interakcja gazu w szczelinach jest znacząca, przez co maleje wypadkowe obciążenie szyb. Pokazano, że istnieją tutaj krytyczne wymiary IGUs, dla których naprężenie i wskaźnik deformacji są największe. Stwierdzono również, że zwiększenie liczby szczelin w IGUs skutkuje znaczącym zwiększeniem wartości naprężenia i ugięcia spowodowanego obciążeniami klimatycznymi.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2021, 27 (177); 213-218
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of climate change on CO2 and CH4 concentration near closed shaft – numerical simulations
Wpływ zmiany klimatu na rozkład stężeń CO2 i CH4 wokół nieczynnego szybu – symulacje numeryczne
Autorzy:
Wrona, P.
Powiązania:
https://bibliotekanauki.pl/articles/219322.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
emisja gazów cieplarnianych
zmiana klimatu
likwidacja kopalń
nieczynny szyb
lokowanie podziemne gazów
bezpieczeństwo
CFD
greenhouse gas emissions
climate change
mine closure
abandoned shafts
underground gas storage
public safety
Opis:
Given the scientific consensus pointing to climate change, the more extreme weather events associated with this will lead to deeper pressure drops. As has already been stated, pressure drops are the main cause of gas flow from underground sites to the surface. This article presents the results of numerical simulations of the change in distribution of CO2 and CH4 near a closed mining shaft under the predicted baric tendency. Simulations have been undertaken by means of the FDS software package with the Pyrosim graphical interface – a CFD tool for fire and ventilation analysis. Assumptions have been based on previous results of in-situ measurements. The results (determined for a height of 1m above the ground) were compared to the following levels (later in the text comparison levels): for CO2 0.1%vol. according to Pettenkoffer’s scale and 2.5%vol. for CH4 as the half of Lower Explosive Limit (LEL). The results show that the deeper baric drops anticipated could lead to a wider spread of both greenhouse gases in the vicinity of the shaft, especially along the prevailing wind direction. According to the results obtained, CO2 and CH4 with concentrations above their comparison levels are expected at a distance greater than 50m from the shaft when wind is present for CO2 and at a distance of 4.5m for CH4. Subsequent analysis of the results enabled the determination of functions for describing the concentration of gases along the wind direction line under the projected pressure drop. The results relate to a particular case, although the model could easily be modified to any other example of gas emissions from underground sites.
Wraz ze zmianami klimatu należy spodziewać się większej niż obecnie liczby dni w roku, w których będą występować ekstremalne zjawiska pogodowe, związane z przechodzeniem coraz głębszych frontów atmosferycznych (np. Falarz, 1997; Koźmiński i Michalska, 2010). Przyczyni się to do wzrostu tendencji barycznej zniżek ciśnienia. Zniżki baryczne są główną przyczyną emisji gazów kopalnianych na powierzchnię (Wrona et al., 2016b). Gazy te zawierają głównie CO2 i CH4, które są uznawane za gazy cieplarniane oraz mogą stworzyć lokalne zagrożenie dla bezpieczeństwa powszechnego (np. Czaja, 2012). W artykule przedstawiono wyniki symulacji numerycznych dotyczących zmiany stężenia obu gazów emitowanych z nieczynnego szybu górniczego na skutek zwiększającej się zniżkowej tendencji barycznej. Na podstawie analizy literaturowej zagadnienia (np. Falarz, 1997), stwierdzono, że w przyszłości możliwe są ekstremalne zniżki baryczne sięgające lub nawet przekraczające 5 hPa/1h. Na obszarze południowej Polski można spodziewać się raz na dwa lata zniżki sięgającej 4 hPa/1h oraz raz na 10 lat przekraczającej 5 hPa/1h. Takie zdarzenie, spowodowane przez zmiany klimatu, może doprowadzić do intensywniejszego wypływu gazów z obszarów podziemnych, a przez to zasięg ich oddziaływania może być zaskakujący i przede wszystkim niebezpieczny dla okolicznej ludności. Równocześnie do atmosfery zostanie wyemitowana większa ilość gazów cieplarnianych. Natężenie emisji gazów przyjęte podczas symulacji oparto o wyniki pomiarów in-situ nad jednym z nieczynnych szybów na Górnym Śląsku (Wrona et al., 2016b), kiedy to wyznaczono empiryczną zależność (1) pomiędzy wartością tendencji zniżki barycznej, a natężeniem wypływu gazów przez szyb. Założono także stężenia obu gazów jako 5%obj. Wartości te określono jako prawdopodobne na podstawie przeprowadzonych wcześniej pomiarów (Wrona et al., 2016b), oraz na podstawie analizy literaturowej (np. Nawrat, 2002; Szlązak et al., 2002; Krause, 2003). Założono kilka wariantów (zestawów danych wejściowych) symulacji. Dotyczyły one zmiennej wartości tendencji barycznej (TB) oraz wpływu wiatru z jednego kierunku geograficznego (zachodu).Wyznaczone wartości zostały określone na wysokości 1m nad gruntem. Wykazano, że przy bezwietrznej pogodzie, wraz ze wzrostem tendencji barycznej do wartości 5 hPa/1h zasięg obecności CO2 w stężeniu przekraczającym 0.1%obj. (wartość po przekroczeniu której można odnotować efekt duszący, wg skali Pettenkoffera), sięga 45 m. Dla metanu przyjęto poziom porównawczy jako 2.5%obj. stanowiący połowę dolnej granicy wybuchowości tego gazu i stwierdzono, że stężenie wyższe od tej wartości występuje do 4 m od szybu. Przy wietrze 5m/s z zachodu i TB = 1 hPa/1h wartości NDS w linii wiatru (E) są przekroczone do 50 m dla CO2 i 4.2 m dla CH4 (Rys. 6,7). Natomiast przy prognozowanej zniżce 5 hPa/1h wartość NDS dla CO2 w linii jest przekroczona na ponad 50 m od szybu, a dla CH4 na 4.5 m (Rys. 8,9) Prognozę dotyczącą zmiany stężenia na linii zgodnej z dominującym kierunkiem wiatru przedstawiono na rysunkach 10 i 11, podano funkcje aproksymujące i współczynnik determinacji wykonanej prognozy (2) i (3). Wykazano, że przy spodziewanej na skutek zmian klimatu zniżce barycznej sięgającej 5 hPa/1h oba gazy mogą być obecne w odległości ponad 100 m od szybu na wysokości 1m nad gruntem. Uzyskane wyniki wskazują na możliwość występowania w przyszłości poważniejszego niż obecnie zagrożenia gazowego wokół nieczynnych szybów, a także zwiększonej emisji gazów cieplarnianych do atmosfery. Zbudowany model może być łatwo modyfikowany do innych przypadków emisji gazów z górotworu, np. przy rozszczelnieniu instalacji CCS lub UCG, a także przy wszelkich stanach awaryjnych systemów odmetanowania.
Źródło:
Archives of Mining Sciences; 2017, 62, 3; 639-652
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of the estimation of the parameters values on the accuracy of predicting the impacts of mining exploitation
Wpływ oszacowania wartości parametrów modelu na dokładność prognozowania wpływów eksploatacji górniczej
Autorzy:
Niedojadło, Z.
Gruszczyński, W.
Powiązania:
https://bibliotekanauki.pl/articles/219662.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
protective pillars
shaft
vertical strains
mean errors
predicting the impacts of exploitation
Monte Carlo method
filary ochronne
szyb
odkształcenia pionowe
błąd średni
prognozowanie wpływów eksploatacji
metoda Monte Carlo
Opis:
The possibility of the assessment of the probability that the acceptable values of deformation indexes will be exceeded and the introduction of the coefficient of safety are more and more seriously considered in case of predicting the impacts of exploitation both on the surface and the shaft tube. This article presents the mentioned above issue focusing on the authors’ project of the exploitation in the protective pillars of the shafts of the Legnica and Głogów Copper Area (LGOM). To assess the accuracy of the predicted deformation indexes Monte Carlo method (often used in statistics) was proposed as well as the strict and approximate analysis using the law of error propagation. The values of vertical strains were analysed, as the most important at the assessment of the state of deformation of the shaft tube. The comparison of the results obtained with different methods confirmed the correctness of the carried out calculations. The applied methods allowed the analysis of the impact of individual parameters of the model on the prediction of the accuracy of forecast. This article makes the continuation of the solutions of the article (Niedojadło & Gruszczyński, 2010) thus some contents essential for the continuity of understanding were repeated here.
Możliwość oceny prawdopodobieństwa przekroczenia dopuszczalnych wartości wskaźników deformacji oraz wprowadzenie współczynnika bezpieczeństwa coraz częściej są brane pod uwagę w przypadku prognozowania wpływów eksploatacji tak na powierzchnię jak i rurę szybową. W niniejszym artykule przedstawiono powyższe zagadnienie na przykładzie autorskiego projektu eksploatacji w filarach ochronnych szybów LGOM. Do oceny dokładności prognozowanych wskaźników deformacji zaproponowano wykorzystywaną w statystyce metodę Monte Carlo oraz analizę ścisłą i przybliżoną wykorzystującą prawo przenoszenia się błędów średnich. Analizowano wartości odkształceń pionowych, jako najistotniejsze przy ocenie stanu deformacji rury szybowej. Porównanie wyników uzyskanych różnymi metodami potwierdziły poprawność wykonanych obliczeń. Zastosowane metody pozwoliły na analizę wpływu poszczególnych parametrów modelu na dokładność prognozy. Niniejszy artykuł stanowi kontynuację rozważań zawartych w artykule (Niedojadło & Gruszczyński, 2010) stąd pewne treści niezbędne dla zachowania ciągłości rozumowania zostały powtórzone.
Źródło:
Archives of Mining Sciences; 2015, 60, 1; 173-193
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Techniczne metody kontroli podstawowych obiektów zakładu górniczego
Technical methods of control of essential mine objects
Autorzy:
Szade, A.
Szot, M.
Powiązania:
https://bibliotekanauki.pl/articles/341003.pdf
Data publikacji:
2006
Wydawca:
Główny Instytut Górnictwa
Tematy:
zakład górniczy
prace geodezyjne
urządzenia pomiarowe
szyb kopalniany
kontrola urządzeń
tortester szybowy
laser górniczy
mining unit
geodetic works
measuring devices
mine shaft
control of devices
track tester
mine laser
Opis:
W artykule przedstawiono wybrane techniki i urządzenia pomiarowe wspomagające prace geodezyjne prowadzone na podstawowych obiektach zakładów górniczych. Zaproponowane rozwiązania zostały opracowane w Głównym Instytucie Górnictwa i są obecnie stosowane w górnictwie. Przedstawiono także specjalistyczne urządzenia pomiarowe, w tym laserowe czujniki, wskaźniki i sondy stosowane w nowoczesnych pomiarach i kontroli urządzeń wyciągowych szybów górniczych i innych obiektów zakładów górniczych.
In this paper, chosen techniques and measuring devices were presented supporting geodetic works for essential mine objects. Proposed solutions were developed in Central Mining Institute and are presently applied in mining. Specialist measuring devices were also presented including laser sensors, indicators and probes used in modern measurements and control of hoisting devices of mine shafts and other mine objects.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2006, 3; 79-88
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dobór wentylatorów głównych dla modelu docelowego kopalni X na podstawie analizy i obliczeń sieci wentylacyjnej
Selection of main fans for the target of the X mine based on analysis and calculation of the ventilation network
Autorzy:
Mocek, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1841041.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
kopalnia
sieć wentylacyjna
model docelowy
szyb
wentylator główny
wydajność
otwór równoznaczny
spiętrzenie potencjałów aerodynamicznych
mine
ventilation network
target model
shaft
main fan
efficiency
equivalent hole
accumulation of aerodynamic potentials
Opis:
W artykule dokonano analizy i obliczeń obecnej i przyszłej sieci wentylacyjnej kopalni X w celu doboru parametrów wentylatorów głównych jakie powinny być zastosowane w modelu docelowym kopalni X po likwidacji niezbędnej infrastruktury wyrobisk górniczych i przystosowaniu kopalni do roli centralnej pompowni wód dołowych będącej zabezpieczeniem dla sąsiadujących z nią kopalń i zakładów górniczych. W artykule przedstawiono wyniki pomiarów parametrów aktualnej sieci wentylacyjnej Kopalni X oraz sieci modelu docelowego za pomocą programu AERO-2014D firmy POK „Zachód” Spółka z o. o. Symulacje parametrów sieci w modelu docelowym uwzględniały likwidację dwóch szybów i zbędnych wyrobisk górniczych. Badania przeprowadzono dla różnych typów wentylatorów głównych. Uzyskane wyniki pozwoliły dobrać optymalny wentylator główny, spełniający założone wymagania wentylacyjne w przyszłym modelu docelowym kopalni X.
The article analyzes and calculates the current and future ventilation network of the X mine in order to select the parameters of the main fans that should be used in the target model of the X mine after the liquidation of the necessary mining excavations infrastructure and adaptation of the mine to the role of a central underground water pumping station which is a protection for neighboring mines and mining plants. The article presents the results of measurements of the parameters of the current ventilation network of the Mine X and the target model network using the AERO-2014D program of the company POK "Zachód" Spółka z o.o. Simulations of network parameters in the target model included the liquidation of two shafts and unnecessary mining excavations. The tests were carried out for various types of main fans. The obtained results enabled the selection of an optimal main fan meeting the assumed ventilation requirements in the future target model of the X mine.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2020, 9, 2; 71-85
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optymalizacji parametrów sieci wentylacyjnej kopalni X w przypadku likwidacji jednego z szybów wentylacyjnych
Optimization of the ventilation network parameters of the X mine in the event of liquidation of one of the ventilation shafts
Autorzy:
Mocek, Piotr
Smoliło, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/1841069.pdf
Data publikacji:
2019
Wydawca:
STE GROUP
Tematy:
kopalnia
sieć wentylacyjna
model docelowy
szyb
wentylator główny
wydajność
otwór równoznaczny
spiętrzenie potencjałów aerodynamicznych
Mine
ventilation network
target model
shaft
main fan
efficiency
equivalent hole
accumulation
aerodynamic potentials
Opis:
Artykuł podejmuje problematykę określenia parametrów sieci wentylacyjnej Kopalni X dla przyszłego modelu docelowego jej funkcjonowania, w którym po zakończeniu etapu likwidacji zbędnej infrastruktury kopalnia będzie pełnić rolę centralnej pompowni wód dołowych dla wszystkich kopalń Niecki Bytomskiej. W artykule przedstawiono wyniki pomiarów parametrów aktualnej sieci wentylacyjnej Kopalni X oraz za pomocą programu AERO-2014D firmy POK „Zachód” Spółka z o.o. symulację parametrów jej sieci w modelu docelowym po likwidacji szybu „Witczak”. Uzyskane wyniki pozwoliły określić działania techniczne jakie należy podjąć aby zagwarantować stabilność sieci wentylacyjnej w przyszłym modelu docelowym kopalni X.
The article deals with the issue of determining the parameters of the ventilation network of the Mine X for the future model of its target operation, in which after completion of the phase of unnecessary infrastructure liquidation will act as a central pumping station for all mines of the Bytom Basin. The article presents the results of measurements of the parameters of the current ventilation network of Mine X and with the help of the AERO-2014D program of the POK "Zachód" Spółka z o.o. simulation of its network parameters in the target model after the liquidation of the "Witczak" shaft. The obtained results allowed to determine the technical measures to be taken to ensure the stability of the ventilation network in the future target model of the X mine.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2019, 8, 1; 203-221
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przedsiębiorstwo Budowy Szybów - nietypowe zadania w budownictwie szybowym
Przedsiębiorstwo Budowy Szybów (Shaft Sinking Company) - non-standard tasks in shaft construction
Autorzy:
Rusek, J.
Sanocki, T.
Powiązania:
https://bibliotekanauki.pl/articles/349639.pdf
Data publikacji:
2007
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
szyb
pogłębianie szybu
szybiki skośne
szybik wentylacyjny
rurociąg paliwowy
otwory wielkośrednicowe
lunety zsypcze
shaft
shaft deepening
oblique ore passes
ventilation raise
fuel pipeline
large diameter holes
chute raises
Opis:
W grudniu 2003 roku Kopex SA zawarł kontrakt na pogłębienie szybu głównego oraz wykonanie i wyposażenie wyrobisk towarzyszących w kopalni rudy miedzi i cynku Cayeli Bakir Isletmeleri w Turcji. W ramach zadania polegającego na udostępnieniu nowego poziomu wydobywczego od grudnia 2003 do sierpnia 2007 r. PBSz SA wykonał kompleksowe roboty w branży górniczej i mechanicznej. Zakres robót obejmował: pogłębienie o 286 m czynnego szybu wydobywczego o średnicy 5,5 m, wykonanie i wyposażenie komory podszybia, kieszeni skipowej, przekopu przenośnikowego, komory rozdzielni, pompowni głównej na nowym poziomie wydobywczym, głębienie szybików skośnych - przepustów rudy oraz wentylacyjnego, wydrążenie ok. 1000 m wyrobisk kamiennych z zastosowaniem torkretowanej obudowy kotwowej. Przy głębieniu szybu i szybików oraz wykonaniu obiektów towarzyszących i drążeniu wyrobisk w szerokim zakresie zastosowano technologie z wykorzystaniem otworów wielkośrednicowych wierconych oraz wykonanych z wykorzystaniem technik strzałowych. Zastosowane technologie pozwoliły zrealizować nietypowe zadania budownictwa podziemnego.
In December 2003 Kopex SA concluded a Contract for main shaft deepening, construction and furnishing of support excavations at Cayeli Bakir Isletmeleri Zink and Copper Ore Mine in Turkey. From December 2003 till August 2007, PBSz SA carried out complete work in mining and mechanical branches, within the confines of a project consisting in opening-out a new production level. The scope of work included: deepening by 286 m an operating production shaft of 5.5 m diameter, construction and furnishing of shaft station room, skip pocket, conveyor drift, electric substation room and main pump room on the new production level, sinking of oblique ore passes and a ventilation raise, driving approx. 1000 m of stone headings with the application of shotcreted anchor support. During the shaft and ore pass sinking, the construction of support structures and driving of headings procedure employing the techniques of large diameter hole drilling and blasting were applied at a wide range. The procedure applied allowed the carrying out non-standard tasks in shaft construction.
Źródło:
Górnictwo i Geoinżynieria; 2007, 31, 3; 371-384
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie przepływu strumienia ciepła od promieniowania słonecznego przez szyby o różnych charakterystykach radiacyjnych
Solar radiation heat flow measurement through different radiative properties glazing
Autorzy:
Nowak, Ł.
Nowak, H.
Powiązania:
https://bibliotekanauki.pl/articles/362868.pdf
Data publikacji:
2009
Wydawca:
Instytut Fizyki Budowli Katarzyna i Piotr Klemm
Tematy:
przepływ ciepła przez szyby
charakterystyki radiacyjne szyb
szkło barwione
powłoki na szybach
badania doświadczalne
heat flow by windows panel
radiational characteristic of window panel
stained glass
coat in windows panel
experimental studies
Opis:
Wymiana ciepła przez część przezierną przegród przezroczystych stanowi istotny element bilansu cieplnego budynku, zarówno jako składnik pożądanych zysków cieplnych w okresie zimowym jak i zysków niepożądanych, które mogą prowadzić do przegrzewania się pomieszczeń w okresie letnim [1]. Różne rodzaje szyb charakteryzują się różnym poziomem przepuszczanie energii słonecznej do wnętrza budynku. W artykule przedstawiono analizę wyników pomiarów gęstości strumienia ciepła przepływającego przez przegrodę przezroczystą pochodzącą głównie z promieniowania słonecznego, a także zmiany temperatury wewnątrz kaset pomiarowych w zależności od typu zastosowanego oszklenia.
Heat flow through visible part of glazed facades is an important part of whole building energy balance. It could be a part of preferable solar heat gains in the winter but could also lead to room overheating in the summer. Different radiative properties of glazing have an important influence of transmitted solar energy amount to the building interior. The description of heat flow measurements, effects on measuring box air temperature and its conclusions are presented in the paper.
Źródło:
Fizyka Budowli w Teorii i Praktyce; 2009, T. 4; 147-152
1734-4891
Pojawia się w:
Fizyka Budowli w Teorii i Praktyce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody badań wytrzymałościowych obudowy szybów kopalnianych
Methods of strength tests of mine shafts supports
Autorzy:
Bock, S.
Powiązania:
https://bibliotekanauki.pl/articles/340997.pdf
Data publikacji:
2006
Wydawca:
Główny Instytut Górnictwa
Tematy:
szyb kopalniany
obudowa szybu
wytrzymałość obudowy
badanie wytrzymałościowe
metoda sprzężona
metoda sklerometryczna
metoda ultradźwiękowa
metoda pull-off
mine shaft
shaft support
strength test
associated method
sclerometric method
ultrasonic method
pull-off method
Opis:
W artykule dokonano przeglądu stosowanych w Zakładzie Technologii Eksploatacji i Obudów Górniczych Głównego Instytutu Górnictwa sposobów określania wytrzymałości obudowy szybowej, na podstawie badań nieniszczących (metoda sklerometryczna, ultradźwiękowa), półniszczących (metoda "pull-off) oraz niszczących (badanie próbek pobranych bezpośrednio z obudowy szybowej). Bardziej szczegółowo opisano metodę sprzężoną, pozwalającą na dokładniejsze określenie wytrzymałości na ściskanie betonu oraz cegły z użyciem metod nieniszczących (sklerometrycznej, ultradźwiękowej). Wyniki badań wykorzystano do opracowania nowego wzoru na obliczanie wytrzymałości na ściskanie z uwzględnieniem liczby odbić młotka Schmidta oraz prędkości fal ultradźwiękowych. Przedstawiono także metodykę prowadzenia pomiarów wraz z przykładowymi wynikami badań (Bock i in. 2005).
In this paper, a review was done of methods of strength tests of mine shaft support used in the Department of Extraction Technologies and Mining Support of Central Mining Institute on a basis of non-destructive testing (sclerometric method, ultrasonic method), semi-destructive ("pull-off method) and destructive (tests of samples taken directly from a shaft support). An associated method was described more specifically, enabling determining a compression strength of concrete and bricks with higher precision by the non-destructive methods (sclerometric, ultrasonic). The tests results were used for developing a new formula for calculation of compressive strength taking into account a number of Schmidt hammer rebounds and a velocity of ultrasonic waves. The methodology of tests conducting, together with examples of tests results were presented (Bock et al. 2005).
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2006, 3; 23-41
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowe klasyfikacje w zakresie odporności ogniowej ścian nienośnych - obudowy szybów instalacyjnych z okładzinami z płyt gipsowo-kartonowych
New fire resistance classification of partitions - installation shafts lining covered by gypsum plaster-boards
Autorzy:
Wróblewski, B.
Borowy, A.
Powiązania:
https://bibliotekanauki.pl/articles/162041.pdf
Data publikacji:
2010
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
szyb instalacyjny
obudowa szybu
ściana działowa
płyta gipsowo-kartonowa
reakcja na ogień
odporność ogniowa
badanie ogniowe
klasyfikacja ogniowa
ściana nienośna
installation shaft
shaft lining
partition
gypsum-plaster board
reaction to fire
fire resistance
fire resistance test
fire resistance classification
non-bearing wall
Opis:
Artykuł przedstawia: informacje o produkcji płyt gipsowo-kartonowych w Polsce, właściwości płyt gipsowo-kartonowych w ogniu i stare klasyfikacje odporności ogniowej ścian działowych - obudowy szachtów instalacyjnych, nowe metody badań odporności ogniowej ścian nienośnych i klasyfikacje wg normy PN-EN 13501-2:2008, nowe zalecenia normy PN-EN 520, nowe badania odporności ogniowej i nowe klasyfikacje ogniowe ścian - obudowy szybów instalacyjnych, wnioski.
The paper presents: information about production of partitions in Poland, properties of gypsum-plaster boards in fire and old fire resistance classification of partitions, the new test methods of fire resistance for non-load bearing walls and classification standard PN-EN 13501-2:2008, the new requirements of the standard PN-EN 520, the new fire resistance tests and the new fire resistance classification of partitions, conclusions.
Źródło:
Przegląd Budowlany; 2010, R. 81, nr 6, 6; 74-76
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność szyb czołowych szybkich pojazdów szynowych na zderzenia z tzw. ciałami obcymi
Fast rail vehicles windshield resistance to impact with extraneous bodies
Autorzy:
Boguszewicz, P.
Wodyński, P.
Powiązania:
https://bibliotekanauki.pl/articles/213361.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
szyby czołowe szybkich pojazdów szynowych
zderzenia szyb czołowych z ciałami obcymi
transport i ochrona środowiska
zagrożenie bezpieczeństwa kierujących pojazdami
sposoby ograniczania obszarów uszkodzeń
wytrzymałość struktur
fast rail vehicles windshield
impact with extraneous bodies
transport and environment protection
strength of structures
Opis:
W pracy przedstawiono warunki powstawania zderzeń, wynikające z nich zagrożenia dla bezpieczeństwa kierujących pojazdami, pasażerów i współużytkowników dróg. Wskazano sposoby ograniczania obszarów uszkodzeń oraz konieczność prowadzenia odpowiednich badań eksperymentalnych. Opisano stanowisko badawcze i jego cechy.
This paper presents conditions of occur impacts, the resulting threats drivers and passengers. It shows ways of reducing area of damage and points to the need for experimental research. The test stand and its characteristics are described.
Źródło:
Prace Instytutu Lotnictwa; 2010, 4 (206); 5-12
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kopalnie siarki w Swoszowicach – status prawny i formy zarządu w czasach staropolskich i w okresie zaborów
Sulphur Mines in Swoszowice – Legal Status and Forms of Management
Autorzy:
Galas, Dominik
Powiązania:
https://bibliotekanauki.pl/articles/923831.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Jagielloński. Wydawnictwo Uniwersytetu Jagiellońskiego
Tematy:
górnictwo siarkowe gwarectwo
spółka eksploatacyjna
złoża siarki
wieś klasztorna
górnik
mieszczanie
szlachta
dzierżawca
gmina
szyb górniczy
naczelnik zakładu górniczego
wyższy urząd górniczy
uzdrowisko
sulphur mining
miners guild
monastic village
miner
bourgeoisie
gentry
cotters
borough
shaft
chief of mineral-extracting industries
State Mining Authority
health resort
Opis:
The beginning of sulphur ore mining in Swoszowice, having lasted for almost 500 years, goes back to the 15th century when the need for sulphur increased along with the firearm production development. In the Middle Ages alchemists called sulphur the ‘element of flammability’. After the invention of fi rearm sulphur gained big importance. It became an ingredient gunpowder. The real impulse for sulphur mining development in Swoszowice, a village near Krakow, was the publication of two documents: Village Land Act in Swoszowice and Diploma, that permitted mining in Swoszowice and gave a privilege to miners guild (co-partnership extracting sulphur ore) that enabled them to carry out extraction of sulphur in the whole country. It was given in 1415 by the Polish king,Władysław II Jagiełło. In the beginning, the miners guild consisted of well-known Cracow burghers: Michał Fayger, Piotr Słodownik, Mikołaj Sołtys from Stradom and a mineworker Krystian. Then it became a part of goods of Corpus Christi Monastery in Kazimierz and after the partitions of Poland it was a state-owned entity until 1887. Sulphur mining in Swoszowice made Jagiellonian dynasty powerful and influential. It lasted almost continually till 1886. At that time the pit in Swoszowice was the biggest in Europe. In the 18th century 250 workers worked there and 2,5 tones of sulphur were mined each year. In the late 19th century (1871–1876) the mine in Swoszowice covered 80–90 % of sulphur demand in Austro-Hungarian Monarchy. There were many reasons for the fall of the sulphur mine in Swoszowice such as: predatory economy, decrease in sulphur ore and increase of production costs, caused for example by the rise of wood prices (wood was needed to make protection systems of the shafts), groundwater floods in the shafts. Miners were also exposed to harmful impact of hydrogen sulfi de. Additionally, the mine business in Swoszowice was negatively infl uenced by ongoing competition, the renewal of sulphur production in Sicilia, cheaper sulphur production from pirytes in Hungary, markdown of tariffs on sulphur carriage as a consequence of the Trade Act between Austria and Italy lowering the duty on imported sulphur from Sicilia. The last attempts to restart the mine in Swoszowice were made during the World War I, in 1917. For that reason the Polish Sulphur Factory consortium was created. It conducted mining works in the area of bathing facilities. Two shafts were deepened: Elżbieta and Piotr. Sulphur ore, with 22–25% sulphur content, was discovered on a depth of 18 meters in the first one. The mining works were stopped though.
Źródło:
Krakowskie Studia z Historii Państwa i Prawa; 2013, 6, 4; 387-404
2084-4115
2084-4131
Pojawia się w:
Krakowskie Studia z Historii Państwa i Prawa
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-49 z 49

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies