Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "S-parameters" wg kryterium: Temat


Tytuł:
Dynamic elastic properties of the hard coal seam at a depth of around 1260 m
Dynamiczne sprężyste właściwości pokładu węgla na głębokości około 1260 m
Autorzy:
Krawiec, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/1849546.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
dynamic elastic parameters
coal seam
P-wave velocity
S-wave velocity
seismic profiling
dynamiczne parametry sprężyste
pokład węgla
prędkość fali P
prędkość fali S
profilowanie sejsmiczne
Opis:
The knowledge of the dynamic elastic properties of a coal seam is important in the context of various types of calculations of the seam behavior under various stress-strain conditions. These properties are often used in numerical and analytical modeling related to maintaining the stability of excavations and the analysis of mechanisms, e.g. related to the risk of rock bursts. Additionally, during the implementation of seismic surveys, e.g. seismic profiling and seismic tomography in coal seams, the reference values of the elastic properties of coal are used in the calculation of relative stresses in various geological and mining conditions. The study aims to calculate the dynamic elastic parameters of the coal seam located at a depth of 1,260 m in one of the hard coal mines in the Upper Silesian Coal Basin (USCB). Basic measurements of the velocity of P- and S-waves were conducted using the seismic profiling method. These surveys are unique due to the lack of the velocity wave values in the coal seam at such a great depth in the USBC and difficult measurement conditions in a coal mine. As a result, dynamic modulus of elasticity was calculated, such as Young’s modulus, volumetric strain modulus, shear modulus and Poisson’s ratio. The volumetric density of coal used for calculations was determined on the basis of laboratory tests on samples taken in the area of the study. The research results showed that the calculated mean P-wave velocity of 2,356 m/s for the depth of 1,260 m is approximately consistent with the empirical relationship obtained by an earlier study. The P-wave velocity can be taken as the reference velocity at a depth of approx. 1,260 m in the calculation of the seismic anomaly in the seismic profiling method.
Znajomość dynamicznych właściwości sprężystych pokładu węgla jest istotna w kontekście różnego rodzaju obliczeń zachowania się pokładu w różnorakich warunkach naprężeniowo-odkształceniowych. Właściwości te są często wykorzystywane w modelowaniach numerycznych i analitycznych związanych z utrzymaniem stateczności wyrobisk oraz analizą mechanizmów, np. związanych z zagrożeniem tąpaniami. Dodatkowo w trakcie realizacji badań sejsmicznych np. profilowań sejsmicznych i tomografii sejsmicznej w pokładach węgla referencyjne wartości właściwości sprężyste węgla wykorzystywane są w obliczaniach naprężeń względnych w różnych warunkach geologiczno-górniczych. Celem badań jest obliczenie dynamicznych sprężystych parametrów pokładu węgla, położonego na głębokości około 1260 m, w jednej z kopalń węgla kamiennego w Górnośląskim Zagłębiu Węglowym. Podstawowe pomiary prędkości fal sejsmicznych wykonano metodą profilowania sejsmicznego. Te pomiary są unikatowe ze względu na dużą głębokość położenia profilu pomiarowego oraz trudne warunki pomiarowe w kopalni. W efekcie obliczono dynamiczne moduły sprężystości takie jak: moduł Younga, moduł odkształcenia objętościowego, moduł odkształcenia postaciowego oraz współczynnik Poissona. Gęstość objętościową węgla przyjętą do obliczeń wyznaczono na podstawie testów laboratoryjnych na próbach pobranych w rejonie badań. Wyniki badań pokazały, że obliczona średnia prędkość fali P równa 2356 m/s dla głębokości 1260 m jest w przybliżeniu zgodna z empirycznymi zależnościami określonymi we wcześniejszych badaniach. Prędkość fali P może być przyjęta jako prędkość odniesienia na głębokości około 1260 m w obliczeniach anomalii sejsmicznej w metodzie profilowania sejsmicznego.
Źródło:
Gospodarka Surowcami Mineralnymi; 2021, 37, 3; 159-176
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical aspects of wellbore stability in shales and coals
Stateczność otworów w warstwach łupków oraz węgli
Autorzy:
Szpunar, Tadeusz
Budak, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2143630.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
well
stability
shale
coal
mechanical parameters
unconfined compressive strength
Poisson’s ratio
swelling pressure
overburden
pressure
mud
density
stateczność
otwór
parametry mechaniczne
łupek
węgiel
wytrzymałość na ściskanie
współczynnik Poissona
ciśnienie pęcznienia
ciśnienie
nadkład
gęstość
płuczka
Opis:
This paper presents a simple model which can be used to calculate the following values: critical depth for which the well integrity is preserved in a shale or coal horizon with actual shale/coal mechanical parameters, actual mud density and reservoir parameters; minimum mud density at which stress concentration at the wellbore wall is below the allowable limit for a given rock’s mechanical parameters, formation pressure gradient, and overburden pressure gradient; mud density required for the preservation of shale/coal integrity at the wellbore wall at any depth, assuming that the strength parameters of shale or coal, formation pressure gradient, and overburden pressure gradient are constant. The appropriate equations were derived using the maximum principal strain hypothesis, which holds for brittle materials. It was also assumed that the radial pressure at the borehole wall is caused by the weight of overburden rocks. The author’s intention was to provide formulas which are as simple as possible and which can be easily used in practice. The final equations were based on the solution to the Lame problem, which was adopted to represent a vertical drilling well with a circular cross-section and filled with mud whose hydrostatic pressure is assumed to oppose the pore pressure. Included are effects of silt swelling pressure, overburden pressure, mud density and the mechanical properties of the rock – including the unconfined compressive strength and Poisson’ s ratio. In the case of shale or silty coal layers, the swelling pressure increases the volume of the clay minerals in the pores by diffusion the mud filtrate, which reduces the pore volume and increases the pore pressure, and therefore impacts the calculations. Presented model allows for derivation of the Hubert–Willis formula for fracturing pressure or fracture pressure gradient, which are commonly used in the oil industry. The calculation results are presented using data from the domestic oil industry and data from one of the Polish coal mines.
W artykule podano prosty model umożliwiający obliczenie następujących wielkości: głębokości krytycznej, w jakiej pokład łupków lub węgla zachowa integralność przy danych parametrach mechanicznych łupku lub węgla, danej gęstości płuczki i znanych parametrach złożowych; minimalnej gęstości płuczki, przy której koncentracja naprężeń na ścianie otworu nie przekracza granicy dopuszczalnej dla danych parametrów mechanicznych łupku lub węgla oraz gradientu ciśnienia i nadkładu; gęstości płuczki, przy której zachowana będzie integralność ścian otworu w warstwach łupku lub węgla w każdej głębokości dla danych parametrów mechanicznych łupku, przy stałym gradiencie ciśnienia i nadkładu. Wyprowadzono odpowiednie wzory, przyjmując hipotezę wytrzymałościową maksymalnego wytężenia materiału stosowaną w przypadku materiałów kruchych. Przyjęto również, że przy założeniu odkształceń sprężystych ciśnienie radialne na ścianie otworu jest spowodowane ciężarem skał nadkładu. Intencją autorów było podanie możliwie jak najprostszych wzorów, które mogłyby zostać zastosowane w praktyce. Wykorzystano rozwiązania tzw. problemu Lamégo, to jest rozpatrywano stan naprężeń na ścianie pionowego wyrobiska o przekroju kołowym, traktując skałę jako materiał sprężysty. We wzorach na wielkość naprężeń na ścianie wyrobiska o przekroju w kształcie okręgu uwzględniono wpływ ciśnienia pęcznienia, ciśnienia wywieranego przez nadkład, gęstość płuczki, jak również parametry wytrzymałościowe łupku/węgla, w tym wytrzymałość na ściskanie w jednoosiowym stanie naprężeń i współczynnik Poissona. W przypadku warstw łupków lub węgli zailonych ciśnienie pęcznienia powoduje zwiększenie objętości minerałów ilastych w porach w wyniku dyfuzji filtratu płuczki, co zmniejsza objętość porów i zwiększa ciśnienie porowe, a zatem wpływa na wyniki obliczeń. Przedstawiony model pozwala na wyprowadzenie z niego powszechnie stosowanego w przemyśle wzoru Huberta–Willisa, podającego wielkość ciśnienia szczelinowania skał na ścianie otworu oraz gradientu ciśnienia szczelinowania. Przedstawiono wyniki obliczeń dla danych z otworów z krajowego przemysłu naftowego oraz jednej z polskich kopalni węgla kamiennego.
Źródło:
Nafta-Gaz; 2021, 77, 7; 446-453
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of a solid product with high water content and water retention properties
Autorzy:
Cvijić, Marko
Golob, Janvit
Powiązania:
https://bibliotekanauki.pl/articles/778509.pdf
Data publikacji:
2020
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
water in organic phase emulsion
phase equilibrium
mass transfer
Luikov’s parameters
theory of drying
Opis:
This work presents the development of a solid product with a high water content (99.08%) and water retention properties. Water was chosen as a potential carrier of a volatile active substance and water retaining properties of material were studied at a temperatures and relative air humidity values with the support of the theory of drying. The study first confirmed the role of Gibbs’ phase rule in the research of solid-gas phase equilibrium, and second presented drying kinetics developed from Fick’s second law and expressed with the first term of the Fourier equation. Solutions of equations for phase equilibrium and mass transfer enabled the calculation of Luikov’s parameters, which are important for equilibrium relations and for the diffusivity of water in a solid for mass transfer prediction. The obtained thermodynamic and kinetic parameters enabled product characterisation that may be important for the prediction of retention times.
Źródło:
Polish Journal of Chemical Technology; 2020, 22, 3; 17-23
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Attempts to calculate the pseudo-anisotropy of elastic parameters of shales gas formations based on well logging data and their geostatistical analysis
Autorzy:
Bała, Maria
Cichy, Adam
Wasilewska-Błaszczyk, Monika
Powiązania:
https://bibliotekanauki.pl/articles/184744.pdf
Data publikacji:
2019
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
anisotropy parameters
P and S velocities
Baltic Basin
shale gas formations
acoustic dipole tool
semivariogram
Opis:
This paper presents the attempts to calculate the pseudo-anisotropy of elastic parameters for the Silurian and Ordovician shale formations of several wells located in the Baltic basin. For this purpose, well-logging data were used, in particular data recorded with acoustic dipole tools. With the P and S waves velocities available, measured at the dipole setting in two orthogonal directions XX or YY (SFast and SSlow), the elastic ε and γ parameters were calculated. In this paper we evaluate the effect of different factors e.g., porosity, clay and kerogen content on the velocity of anisotropy shale gas formations. A geostatistical analysis of elastic and reservoir properties was carried out in order to determine the character of the variability of Silurian and Ordovician shale formations in all of the studied wells. Semivariograms for each well characterizing the variation of elastic parameters in the vertical direction were calculated.
Źródło:
Geology, Geophysics and Environment; 2019, 45, 1; 5-20
2299-8004
2353-0790
Pojawia się w:
Geology, Geophysics and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Convergence monitoring as a basis for numerical analysis of changes of rock-mass quality and Hoek-Brown failure criterion parameters due to longwall excavation
Pomiary konwergencji jako podstawa analizy numerycznej zmian jakości górotworu i parametrów kryterium wytrzymałościowego Hoeka-Browna wynikających z eksploatacji ścianowej
Autorzy:
Małkowski, Piotr
Ostrowski, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/220131.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
konwergencja wyrobiska
eksploatacja ścianowa
kryterium wytrzymałościowe Hoeka-Browna
parametry m i s
analiza odwrotna
Hoek-Brown failure criterion
back analysis
convergence of mining gallery
longwall excavation
m and s parameters
Opis:
In the longwall exploitation system, the main gates are subject of the most intensive movements of the rock mass, where the proximity of the excavation front is a key factor. The paper presents the results of a research on the constants mb and s of Hoek-Brown failure criterion for the rocks surrounding the gallery: shale, sandy shale, coal and medium-grained sandstone, in relation to the distance to longwall face. The research comprised numerical modeling based on convergence monitoring records. The convergence measurements were carried out on three stations in a selected maingate in a coal mine from Upper Silesia Coal Basin near Jastrzębie-Zdrój, concurrently with changing distance to the longwall face. The measu-red were the width, the height and the heave of the floor of the gate. The measurements showed that the convergence at the longwall-maingate crossing was 1.5-3 times greater than in the locations much further from the longwall face. It was demonstrated that this effect was due to continuously changing properties of the rock-mass surrounding the gallery that can be expressed as decreasing empirical parameters mb i sof Hoek-Brown’s criterion. These parameters are decreasing exponentially together with the distance to the longwall face The consistency between the theoretical and factual curve varies between 70% to 98%. The change of each of the parameters can be described by general equation P = a· exp(–b·d), where a, b are constants, and d is the distance to the excavation face. The authors highlight that during the me-asurements period the horizontal stress was 1.45 to 1.61 times greater than the concurrent vertical stress. The so high horizontal stress causes heave of unsupported gallery floor which is commonly observed in the mines in Silesia.
Chodniki przyścianowe w systemie eksploatacji ścianowej są najbardziej narażone na intensywne przemieszczenia skał. Wraz ze zmianą położenia frontu eksploatacji skały przechodzą wolno w stan zniszczenia, coraz bardziej przemieszczając się do środka wyłomu. Aby można było skutecznie prze-widywać konwergencję wyrobisk przyścianowych należy właściwie określić właściwości skał w fazie pozniszczeniowej. Wybierając warunek wytrzymałościowy Hoeka-Browna – stałe mb i s, zależne od wskaźnika jakości górotworu RMR lub wskaźnika GSI.W artykule wyznaczono spadek parametrów pozniszczeniowych skał budujących górotwór w rejonie omawianego wyrobiska – łupków ilastych, łupków piaszczystych, węgli i piaskowców średnioziarnistych – w zależności od odległości od frontu ściany. W tym celu wykonano symulacje numeryczne, wykorzystując wyniki pomiarów konwergencji. Pomiary konwergencji wykonano w wyrobisku przyścianowym jednej z kopalń węgla GZW w rejonie Jastrzębia na trzech bazach pomiarowych wraz ze zmieniającą się odległościąbaz pomiarowych od czoła ściany. Badania obejmowały wyznaczenie szerokości, wysokości i wypiętrzenia spągu chodnika. Pomiary wykazały, że konwergencja na skrzyżowaniu ściana – chodnik osiąga wartość1,5-3-krotnie większą, niż dla przypadku, gdy front eksploatacji znajduje się w znacznej odległości od baz pomiarowych. Stwierdzono, że przyczyną takiego stanu rzeczy jest stale zmieniająca się jakość górotworu, która skutkuje obniżeniem parametrów empirycznych warunku wytrzymałościowego Hoek’a-Browna mbi s skał występujących w otoczeniu wyrobiska. Parametry te maleją eksponencjalnie wraz ze zbliżaniem sięfrontu ściany, a zgodność pomiędzy krzywą rzeczywistą a teoretyczną dla występujących przemieszczeńwyrobiska waha się od 70% do 98%. Zmianę dowolnego z powyższych parametrów P można opisaćfunkcją o ogólnym równaniu: P = a exp(–bd), gdzie a i b to stałe, a d to odległość od frontu ściany.Na uwagę zasługuje również analiza naprężeń poziomych w górotworze, jakie musiały wystąpićpodczas prowadzenia pomiarów, które są 1,45-1,61 razy większe od występujących wówczas naprężeńpionowych. Tak duże naprężenia poziome mają istotny wpływ na wartości wypiętrzania nieobudowanego spągu, co znajduje potwierdzenie podczas prowadzenia prac górniczych w kopalniach JSW.
Źródło:
Archives of Mining Sciences; 2019, 64, 1; 93-118
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Doświadczalna identyfikacja obciążenia napędów wysięgnikowego kombajnu chodnikowego podczas urabiania
Experimental identification of the load of the boom–type roadheader’s drives during cutting proces
Autorzy:
Cheluszka, Piotr
Habryka, Dawid
Szolc, Patryk
Powiązania:
https://bibliotekanauki.pl/articles/164419.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
kombajn chodnikowy
proces urabiania
obciążenie napędów kombajnu
badania doświadczalne
pomiary parametrów pracy
roadheader
cutting process
load of roadheader’s drives
experimental tests
measurements of working parameters
Opis:
Proces urabiania, zwłaszcza skał trudno urabialnych, wysięgnikowymi kombajnami chodnikowymi jest źródłem silnych obciążeń dynamicznych, nie tylko napędu głowic urabiających, ale również mechanizmów wychylania wysięgnika, na którego końcu głowice te są rozmieszczone. Zapewnienie odpowiednich proporcji pomiędzy wartościami parametrów siłowych mechanizmów wychylania wysięgnika oraz mocą napędu głowic urabiających i masą kombajnu ma kluczowe znaczenie z punktu widzenia skuteczności i efektywności urabiania czoła przodku drążonego wyrobiska korytarzowego w kopalniach podziemnych lub tuneli. W artykule przedstawiono wybrane wyniki badań doświadczalnych kombajnu chodnikowego R–130 (prod. Famur S.A.) w warunkach półprzemysłowych. Na podstawie charakterystyk dynamicznych zarejestrowanych podczas urabiania powierzchni bloku cementowo-piaskowego określone zostały relacje pomiędzy obciążeniem napędu głowic urabiających oraz mechanizmów wychylania wysięgnika. Zbadano wpływ technologii urabiania (rodzaju skrawu wykonywanego podczas przemieszczania głowic urabiających w ruchu roboczym) przy różnych skojarzeniach wartości parametrów procesu urabiania na obciążenie napędów kombajnu chodnikowego odpowiedzialnych za realizację tego procesu.
The mining process, especially of hard rocks, using boom–type roadheaders is the source of strong dynamic loads not only for the drive of cutting heads, but also for boom swinging mechanisms, at the end of which these cutting heads are arranged. Ensuring appropriate proportions between the values of the force parameters of the boom swinging mechanisms and the power of cutting heads drive and the weight of the roadheader is of key importance from the point of view of efficiency and effectiveness of mining the heading face of the drilled roadways in the underground mine or tunnels. The article presents selected results of experimental investigations of the R–130 roadheader (manufactured by Famur S.A.) in laboratory conditions. On the basis of dynamic characteristics recorded during cutting of the cement-sand block surface, the relations between the load of the cutting heads drive and boom swinging mechanisms were determined. The influence of cutting technology (the type of cut performed during moving of cutting heads in a work movement) was examined with different associations of the values of cutting process parameters for the load of the roadheader’s drives responsible for this process.
Źródło:
Przegląd Górniczy; 2019, 75, 3; 47-61
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some effects of wind on ship’s manoeuvrability
Autorzy:
Szymoński, M.
Powiązania:
https://bibliotekanauki.pl/articles/117192.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
ship’s manoeuvrability
effects of wind
wind resistance
wind speed
windage area
wind pressure force
manoeuvring characteristics
dynamic parameters
Opis:
All ships experience an air and wind resistance while under way of sea, and they may experience adverse effects on wind while manoeuvring in harbours and limited waterways. The wind resistance is proportional to relative wind speed squared, wind direction and the projected windage area of the ship. The paper describes the effect of wind pressure into the ship’s superstructures and houses on ship manoeuvrability, in the range of the wind speed, for the ship which is with the large windage area. The above is one of the recommended information to be included in the ship’s manoeuvring booklet, as per IMO Resolution A.601(15). In sea practice, the manoeuvring characteristics in wind, as wind forces and moments, course-keeping limitation, and drifting under wind influence are fare from these estimated. The results obtained during the several years of practice in ship’s exploitation are included in this paper.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 3; 623-626
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pore Fluid and Lithology Discrimination of a Well in the Niger Delta Region using Elastic Parameters
Autorzy:
Agbasi, Okechukwu E.
Chukwu, Godwill U.
Igboekwe, Magnus U.
E. Etuk, E. Etuk
Powiązania:
https://bibliotekanauki.pl/articles/1112773.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Elastic Parameters
Lithology
Poisson’s ratio
Pore Fluids
Velocity ratio
Opis:
With respect to the high uncertainties associated with methods of determining lithology and pore fluid using well logs, quantitative rock physics analyses was used to determine the lithology and pore fluid of a reservoir in the Niger Delta. Inaccurate prediction of lithology and pore fluid results in the inaccurate determination of other petrophysical properties and parameters such as porosity, permeability, net pay, etc. The primary objective of this research is to predict lithology and pore fluid using rock physics analysis. However, reservoir zones were also predicted. Density, compressional wave velocity and shear wave velocity logs were used as input to calculate elastic parameters such as velocity ratio, Poisson’s ratio and Bulk Modulus. The calculated velocity ratio log was used to differentiate between sand and shale. Poisson’s ratio and velocity ratio using the Goodway interpretation template was carried out and used to delineate pore fluid content; gas sand, oil sand and sandstone formation from cross-plot analysis.
Źródło:
World News of Natural Sciences; 2018, 17; 75-88
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some applications of Noether’s theorem
Autorzy:
Montiel-Pérez, J. Yaljá
López-Bonilla, J.
López-Vázquez, R.
Vidal-Beltrán, S.
Powiązania:
https://bibliotekanauki.pl/articles/1166045.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Complex Riemann-Silberstein vector
Duality rotations
Ignorable variable
Invariance of the action
Lanczos variational method
Linear differential equation of second order
Maxwell equations
Noether’s theorem
Variation of parameters
Variational symmetry
Opis:
If the action S= ∫_(t_1)^(t_2)▒〖L(q,〗 (q,) ̇t) dt is invariant under the infinitesimal transformation t ̃=t+ε τ(q,t), q ̃_r= q_r+ε ξ_r (q,t),r=1,… ,n, with ε=constant ≪1, then the Noether’s theorem permits to construct the corresponding conserved quantity. The Lanczos approach employs to ε= q_(n+1) as a new degree of freedom, thus the Euler-Lagrange equation for this new variable gives the Noether’s constant of motion. Torres del Castillo and Rubalcava-García showed that each variational symmetry implies the existence of an ignorable coordinate; here we apply the Lanczos approach to the Noether’s theorem to motivate the principal relations of these authors. The Maxwell equations without sources are invariant under duality rotations, then we show that this invariance implies, via the Noether’s theorem, the continuity equation for the electromagnetic energy. Besides, we demonstrate that if we know one solution of p(x)y''+q(x)y'+r(x)y=0, then this Lanczos technique allows obtain the other solution of this homogeneous linear differential equation.
Źródło:
World Scientific News; 2018, 106; 69-80
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie porowatości ogólnej i parametrów szkieletowych utworów węglanowych na podstawie pomiarów prędkości fal sprężystych i gęstości
Total porosity and matrix parameters of carbonate rocks based on the elastic wave velocity and density measurements
Autorzy:
Jarzyna, J.
Puskarczyk, E.
Ogórek, E.
Motyka, J.
Powiązania:
https://bibliotekanauki.pl/articles/2061613.pdf
Data publikacji:
2018
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
ULT-100 P&S Ultrasonic Velocity Measurement
fale sprężyste
obrazy falowe
parametry petrofizyczne
gęstość objętościowa
wapienie jurajskie
Olkusz
elastic waves
acoustic waveforms
petrophysical parameters
bulk density
Jurassic limestones
Opis:
Badania wykonano w celu wykazania zależności między prędkościami fal sprężystych uzyskanymi w wyniku pomiarów laboratoryjnych a parametrami otrzymanymi w badaniach hydrogeologicznych (porowatością i gęstością objętościową). Pomiary przeprowadzono na 73 próbkach skalnych, pochodzących w większości z poziomów wodonośnych z rejonu Olkusza. Informacja o prędkościach fal sprężystych w połączeniu z parametrami zbiornikowymi (porowatością, współczynnikiem filtracji i gęstością) dostarczyła dodatkowych informacji o badanych skałach. Zestawienie prędkości fali podłużnej P oraz gęstości objętościowej z porowatością otwartą, obliczoną w badaniach hydrogeologicznych, dało informację o zakresie zmian prędkości oraz gęstości szkieletowej w badanych skałach, które następnie wprowadzono do wzorów na obliczenie porowatości ogólnej badanych próbek. Na podstawie prędkości fal sprężystych, zmierzonych na próbkach wyciętych z rdzeni w dwóch prostopadłych kierunkach, wykonano także analizę anizotropii, co pozwoliło zidentyfikować szczeliny w skale. Analiza wyników hydrogeologicznych i petrofizycznych pokazała, że łącząc ze sobą różnorodne parametry można uzyskać dodatkowe informacje o właściwościach zbiornikowych poziomów wodonośnych.
The purpose of the research was to find relationship between elastic waves velocities obtained from lab measurements and parameters from hydrogeological research. Measurements were conducted on 73 rock samples originating mostly from Jurassic limestone of the Olkusz area. Additional information about the rock samples was obtained when the elastic wave velocities were compared with reservoir parameters such as porosity, permeability and density. Plots of elastic waves velocities vs. porosity and bulk density vs. porosity gave information about the range of P wave velocities from the boundary velocity to the values when porosity is equal to zero. Matrix velocity and density values were introduced into the formulas used to calculate porosity. Anisotropy analysis was made on the basis of elastic wave velocities measured on cores cut in two perpendicular directions. This allowed for identification of fractures in rocks. Results showed that by comparing various petrophysical parameters it was possible to get better information about reservoir properties of aquifers.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2018, 473; 13--25
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka parametrów sprężystych określonych na podstawie pomiarów geofizyki otworowej i modelowań teoretycznych w wybranych formacjach w otworach basenu bałtyckiego i wierconych na szelfie
Characteristics of elastic parameters determined on the basis of well logging measurements and theoretical modeling, in selected formations in boreholes in the Baltic Basin and the Baltic offshore
Autorzy:
Bała, M.
Powiązania:
https://bibliotekanauki.pl/articles/1835469.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
gaz z łupków
parametry sprężyste
moduł Younga
współczynnik Poissona
basen bałtycki
geofizyka otworowa
shale gas
elastic parameters
Young's modulus
Poisson’s ratio
Baltic Basin
well logging
Opis:
W niniejszej pracy zawarto wyniki badań parametrów sprężystych pomierzonych akustyczną sondą dipolową lub obliczonych na podstawie teoretycznych modeli z kilku otworów położonych w basenie bałtyckim i trzech na szelfie. Badania ograniczono do pięciu formacji, poczynając od charakterystycznego poziomu sylurskiego ogniwa mułowców wapnistych z Redy, stanowiącego reper sejsmiczny Sb, a kończąc na kambrze środkowym – poziom Paradoxides paradoxissimus (PP). Zauważono pewne podobieństwa w kształtowaniu się takich parametrów sprężystych jak: prędkości fal podłużnych i poprzecznych, modułów Younga, odkształcenia objętości i postaci – w analizowanych otworach basenu bałtyckiego i odwierconych na szelfie. Otwory te znajdują się w strefie średniej perspektywności dla ropy naftowej i kondensatu oraz dobrej dla gazu ziemnego [14]. Przedstawiona charakterystyka parametrów sprężystych może być wykorzystana w modelowaniach sejsmicznych do badania zmienności poziomów stratygraficznych i wyjaśnienia szeregu problemów pojawiających się przy zintegrowanej interpretacji danych geofizyki otworowej i sejsmicznych pól falowych. Wspomaga również ocenę skał ilastych pod kątem prognozowania zabiegów szczelinowania hydraulicznego i udostępniania węglowodorów ze skał zbiornikowych o niskich przepuszczalnościach. Skały te charakteryzują się zróżnicowaną „kruchością” (brittleness), którą można rozpatrywać w aspekcie składu mineralnego i parametrów sprężystych, takich jak współczynnik Poissona, moduł Younga, moduł odkształcenia objętości, postaci oraz stałe Lamégo.
The paper shows the results of studies of elastic parameters determined on the basis of well acoustic measurements and theoretically modeled in selected boreholes located in the Baltic Basin and offshore Baltic Sea. The study was limited to five formations, starting from the characteristic level of the Silurian Reda calcareous sandstone Member, which is the seismic Sb benchmark and ending with the Middle Cambrian level Paradoxides Paradoxissimus (PP). It was noted, that there were similarities in the distribution of the elastic parameters, such as the velocity of compressed and shear waves, dynamic Young’s modulus, bulk and shear moduli in analyzed boreholes in the Baltic Basin and those drilled in the shelf. These boreholes are located in a zone of average prospects for oil and condensate and good for natural gas [14]. The presented characteristics of elastic parameters may be used in seismic modeling to study the variability of stratigraphic levels and to clarify a number of problems occurring during the integrated data interpretation of well logs and seismic wave fields. It also supports the evaluation of clay rocks for the prediction of hydraulic fracturing and the production of hydrocarbons from reservoir rocks with low permeability. Sedimentary rocks are differentiated in brittleness, which can be seen in terms of the mineral composition and elastic parameters, such as Poisson’s ratio, Young’s modulus, and bulk and shear moduli as well as Lamé’s constant.
Źródło:
Nafta-Gaz; 2017, 73, 8; 558-570
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative study of light sources for household
Badania porównawcze źródeł światła do użytku domowego
Autorzy:
Pawlak, A.
Zalesińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/961306.pdf
Data publikacji:
2017
Wydawca:
STE GROUP
Tematy:
bulb’s replacement
photometric
colorimetric and electric parameters light sources
light-emitting diode (LED)
light sources for household
zamienniki żarówek
parametry fotometryczne
kolorymetryczne i elektryczne źródła światła
diody elektroluminescencyjne (LED)
źródła światła do użytku domowego
Opis:
The article describes test results that provided the ground to define and evaluate basic photometric, colorimetric and electric parameters of selected, widely available light sources, which are equivalent to a traditional incandescent 60-Watt light bulb. Overall, one halogen light bulb, three compact fluorescent lamps and eleven LED light sources were tested. In general, it was concluded that in most cases (branded products, in particular) the measured and calculated parameters differ from the values declared by manufacturers only to a small degree. LED sources prove to be the most beneficial substitute for traditional light bulbs, considering both their operational parameters and their price, which is comparable with the price of compact fluorescent lamps or, in some instances, even lower.
W artykule opisano wyniki badań, na podstawie których wyznaczono i oceniono podstawowe parametry fotometryczne, kolorymetryczne i elektryczne wybranych, ogólnodostępnych, źródeł światła, które były zamiennikami tradycyjnej żarówki o mocy 60 W. Zbadano jedną żarówkę halogenową, trzy świetlówki kompaktowe oraz jedenaście źródeł LED. Generalnie stwierdzono, ze w większości przypadków, zwłaszcza źródeł markowych producentów, parametry zmierzone i obliczone w niewielkim stopniu różnią się do deklarowanych przez producentów. Najkorzystniejszym zamiennikiem żarówek tradycyjnych są źródła LED, zarówno ze względu na swoje parametry użytkowe jak i cenę, porównywalną z ceną świetlówek kompaktowych, a w niektórych przypadkach nawet niższą.
Źródło:
Management Systems in Production Engineering; 2017, 1 (25); 35-41
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of flow graphs in the microwave measurements systems
Zastosowanie grafów przepływu w pomiarach mikrofalowych wielkości elektrycznych
Autorzy:
Piróg, P.
Powiązania:
https://bibliotekanauki.pl/articles/408225.pdf
Data publikacji:
2016
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
flow graphs
Mason's gain formula (MGF)
scattering parameters
microwave measurement
grafy przepływu
reguła Masona
macierz rozproszenia S
pomiary mikrofalowe
Opis:
Flow graphs are the effective tool for description of the complicated microwave measurement systems and usually are used in the process of creating measurement equation. The algorithm which can find this equation is known as the Mason's gain formula (MGF). This operation needs to perform a lot of symbolic computations so performing of this algorithm without proper software is heavy and is vulnerable to appearing some errors. This paper shows which existing scripts for MATLAB can be use to perform this task.
Grafy przepływu są skutecznym narzędziem umożliwiającym opis skomplikowanych układów pomiarowych w technice mikrofalowej i zwykle są stosowane w procesie tworzenia równania pomiaru. Algorytm umożliwiający znalezienie takiego równania jest znany jako reguła wzmocnienia Masona. Wymaga on znacznej liczby obliczeń symbolicznych toteż jego realizacja bez zastosowania oprogramowania jest uciążliwa oraz podatna na wystąpienie błędów podczas wykonywania przekształceń. W niniejszym artykule wskazano możliwość zastosowania istniejących już skryptów programu MATLAB do realizacji tego zadania.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2016, 3; 12-15
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Tin Bronze Melting and Pouring Parameters on Its Properties and Bells’ Tone
Autorzy:
Bartocha, D.
Baron, C.
Powiązania:
https://bibliotekanauki.pl/articles/382015.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin bronze
melting parameters
pouring parameters
bell’s tone
brąz cynowy
parametry wytapiania
parametry zalewania
ton dzwonu
Opis:
The most important feature of bells is their sound. Its clarity and beauty depend, first of all, on the bell’s geometry - particularly the shape of its profile, but also on the quality of alloy used to its cast. Hence, if the melting and pouring parameters could influence the alloy’s properties, what influence they would have on the frequencies of bell’s tone. In the article authors present their own approaches to find answers on that and more questions.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 17-22
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spectral LFER in some aryl azine derivatives
Autorzy:
Thirunarayanan, G.
Powiązania:
https://bibliotekanauki.pl/articles/1191375.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Aryl hydrazines
Hammett correlations
IR spectra
NMR spectra
Swain-Lupton’s parameters
Opis:
About ten (Z)-1-(1-(substitutedphenyl)ethylidene)-2-(diphenylmethylene)hydrazines were prepared and their purities were examined by literature method. The infrared and NMR spectra of these hydrazines were recorded. The characteristics C=N and N-N stretches (ν, cm-1) and the chemical shifts (δ, ppm) of methyl protons and carbons were assigned. These spectral have been correlated with Hammett substituent constants, F, R and Swain-Lupton’s parameters using single and multi-regression analysis. From the results of statistical analyses, the effects of substituent on the spectral data have been studied.
Źródło:
World Scientific News; 2016, 33; 79-95
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies