Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Raman analysis" wg kryterium: Temat


Wyświetlanie 1-11 z 11
Tytuł:
Raman spectroscopic analysis of art and archaeological artefacts of relevance to the preservation of cultural heritage: the illumination of ancient mysteries
Spektroskopowa analiza ramanowska obiektów archeologicznych istotnych dla ochrony dziedzictwa kulturowego: oświecenie starożytnych tajemnic
Autorzy:
Edwards, H.G.M.
Powiązania:
https://bibliotekanauki.pl/articles/217782.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Konserwatorów Zabytków
Tematy:
analiza ramanowska
dziedzictwo kulturowe
obiekt archeologiczny
Raman analysis
Raman spectroscopy
cultural heritage
archaeological artefact
Opis:
This paper reviews the contributions of Raman spectroscopy to the non-destructive characterisation of biological materials, including the sourcing of resins and the identification of biodegradation of art and archaeological artefacts. The advantages of Raman spectroscopy for non-destructive analysis are well-appreciated. However, the ability to record molecular information about organic and inorganic species present in a heterogeneous specimen at the same time, the insensitivity of the Raman scattering process to water and hydroxyl groups which re moves the necessity for sample desiccation, and the ease of illumination for samples of very small and very large sizes and unusual shapes are also apparent. Several examples are used to illustrate the application of Raman spectroscopic techniques to the characterisation of biomaterials and for the preservation of cultural heritage through case studies in the following areas: wall-paintings and rock art, human and animal tissues and skeletal remains, fabrics, resins and ivories.
W artykule omówiono przydatność spektroskopii ramanowskiej dla niedestrukcyjnej charakterystyki materiałów biologicznych, np. badanie źródeł żywic i identyfikacja biodegradacji dzieł sztuki i obiektów archeologicznych. Zalety spektroskopii ramanowskiej w niedekstrukcyjnej analizie są powszechnie uznawane. Jednakże badania dowodzą także możliwości uzyskiwania informacji molekularnych o formach organicznych i nieorganicznych obecnych równocześnie w heterogenicznych próbkach, na braku wpływu wody i grupy hydroksylowej na rozproszenia ramanowskiego co likwiduje konieczność osuszania próbek oraz łatwość analizowania próbek o bardzo małych lub bardzo dużych rozmiarach albo nietypowych kształtach. W artykule przedstawiono kilka przykładów zastosowania spektroskopii ramanowskiej do charakterystyki biomateriałów i ochrony dziedzictwa kulturalnego. Studia przypadków dotyczyły następujących obszarów: malowidła ścienne i naskalne, tkanki ludzkie i zwierzęce oraz szczątki kości, tkaniny, żywice i kość słoniowa.
Źródło:
Wiadomości Konserwatorskie; 2009, 26; 55-64
0860-2395
2544-8870
Pojawia się w:
Wiadomości Konserwatorskie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
FT-IR, FT-Raman, NMR and U-V Spectral investigation: Computation of vibrational frequency, chemical shifts and electronic structure calculations of 1-bromo-4-nitrobenzene
Autorzy:
Shakila, G.
Saleem, H.
Sundaraganesan, N.
Powiązania:
https://bibliotekanauki.pl/articles/1178760.pdf
Data publikacji:
2017
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
DFT
FT-IR
FT-Raman
HOMO-LUMO and MEP
NMR
UV analysis
Opis:
The FT-IR and FT-Raman spectra of 1-bromo-4-nitrobenzene (1B4NB) have been recorded in the range 400-4000 cm-1 and 100-4000 cm-1 respectively. Also the NMR and UV-VIS spectra of 1B4NB have been recorded and analyzed. The molecular structures, fundamental vibrational frequencies and intensity of the vibrational bands are investigated and interpreted theoretically with the use of structure optimizations and normal coordinate force field calculations based on density functional theory (DFT) with basis sets 6-31+G(d,p) and 6-311++G(d,p). The vibrational wave number assignments were made from potential energy distribution (PED) calculations using Veda program. The simulated vibrational spectra of the molecule show excellent agreement with the experimental spectra. The hyper conjugative interaction energy (E)2 and electron densities of donor (i) and acceptor (j) bonds were calculated using NBO analysis. The energy gap of the molecule was found using HOMO and LUMO calculation. The electronic transition was studied using UV-Visible analysis of the title molecule with B3LYP/6-311++G (d,p) level of basis set. The microscopic Non-linear optical behavior, the molecular electrostatic potential (MEP), chemical descriptors and thermo dynamical properties of the title compound were also calculated. In addition, the 1H and 13C NMR chemical shifts values of 1B4NB in the ground state for B3LYP/ 6-311++G (d,p) basis set were also calculated using Gauge independent atomic orbital (GIAO) method.
Źródło:
World Scientific News; 2017, 61, 2; 150-185
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies of physicochemical properties of graphite oxide and thermally exfoliated/reduced graphene oxide
Autorzy:
Drewniak, S. E.
Pustelny, T. P.
Muzyka, R.
Plis, A.
Powiązania:
https://bibliotekanauki.pl/articles/779581.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
graphite oxide
thermally exfoliated/reduced graphene oxide
topography investigations
Raman spectroscopy
elemental analysis
Opis:
The aim of the experimental research studies was to determine some electrical properties of graphite oxide and thermally exfoliated/reduced graphene oxide. The authors tried to interpret the obtained physicochemical results. For that purpose, both resistance measurements and investigation studies were carried out in order to characterize the samples. The resistance was measured at various temperatures in the course of composition changes of gas atmospheres (which surround the samples). The studies were also supported by such methods as: scanning electron microscopy (SEM), Raman spectroscopy (RS), atomic force microscopy (AFM) and thermogravimetry (TG). Moreover, during the experiments also the elemental analyses (EA) of the tested samples (graphite oxide and thermally exfoliated/reduced graphene oxide) were performed.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 4; 109-114
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An application of a Raman scattering analyzer for the determination of natural gas composition at a processing plant
Autorzy:
Włodek, T.
Kuczyński, Sz.
Smulski, R.
Polański, K.
Powiązania:
https://bibliotekanauki.pl/articles/298597.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
Raman spectroscopy
natural gas measurements
quantitative measurements
qualitative measurements
measurement technical assumptions
composition analysis
Opis:
The development of conventional and unconventional natural gas reservoir management includes continuous monitoring of hydrocarbon exploitation processes and its impact on the reservoir and environment. Raman spectroscopy, which allows for the identification of reservoir fluids (including natural gas) components can be a very promising method for the application of providing a quick, non-invasive, nondestructive analysis. The proposed in this paper measurement methods are focused on the use of:– a laboratory cell (autoclave) with sapphire window mounted on a specially prepared bypass pipeline;– a dedicated Raman probe mounted to the available installed stub pipe;– the construction of a special measurement cell. The article presents the basic technical assumptions for measurements of the composition of natural gas with the use Raman spectroscopy.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 3; 619-627
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alunogen from the sulfate efflorescence of the Stone Town Nature Reserve in Ciężkowice (the Outer Carpathian Mountains, Poland)
Autorzy:
Marszałek, Mariola
Gaweł, Adam
Powiązania:
https://bibliotekanauki.pl/articles/27310118.pdf
Data publikacji:
2023
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
sulfate efflorescence
alunogen
thermal analysis
Raman spectroscopy
unit-cell parameters
the Carpathian Mountains
Polska
Opis:
Alunogen (Al2(SO4)3∙17H2O), a rare secondary mineral, has been found in the efflorescence on sandstones from the Stone Town Nature Reserve in Ciężkowice, southeastern Poland. This is probably the first find of this salt on such rocks in Poland. Alunogen forms in various geological environments, but mainly from the oxidation of pyrite and other metal sulfides in ore deposits and Al-rich Earth materials under low-pH conditions. Its crystallization at this particular site depends on a set of necessary physicochemical (pH, concentration), climatic (season, temperature, humidity), site-related (location and protection of efflorescence), and mineralogical (the presence of pyrite) conditions. This paper presents the mineralogical and geochemical characteristics of the alunogen from the Stone Town Nature Reserve (based on SEM-EDS, XRPD, EPMA and Raman spectroscopy methods) as well as of the efflorescence itself (based on XRPD and STA coupled with QMS and FTIR for the analysis of gas products). Crystals of alunogen take the shape of flakes, often with a hexagonal outline, clustered in aggregates forming a cellular network. Its calculated formula is (Al1.96Fe3+ 0.01)∑1.97(SO4)3∙17H2O (based on 12 O and 17 H2O). The unit-cell parameters refined for the triclinic space group P1 are: a = 7.423 (1) Å, b = 26.913 (5) Å, c = 6.056 (1) Å, α = 89.974 (23)°, β = 97.560 (25)°, γ = 91.910 (22)°. The Raman spectra (SO4) bands are: intensive 995 cm−1 (ν1); low-intensive 1069, 1093 and 1127 cm−1 (ν3); low-intensive 419 and 443; medium-intensive 470 cm−1 (ν2); and medium-intensive 616 cm−1 (ν4). Those at 530, 312 and at 338 cm−1 are assigned to water vibrations and those at 135, 156, 180 cm−1 to the lattice modes. Although the efflorescence contained an admixture of other minerals (pickeringite, gypsum and quartz), the predominant alunogen is almost chemically pure and the above parameters are consistent with the values reported in the literature for alunogen from different locations and of various origins.
Źródło:
Geology, Geophysics and Environment; 2023, 49, 2; 139--156
2299-8004
2353-0790
Pojawia się w:
Geology, Geophysics and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detailed spectral monitoring of different combustible blends based on gasoline, ethanol and methanol using FT-Raman spectroscopy
Autorzy:
Ortega Clavero, V.
Weber, A.
Schröder, W.
Meyrueis, P.
Javahiraly, N.
Powiązania:
https://bibliotekanauki.pl/articles/363078.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
mieszanka palna
spektroskopia FT-Ramana
spektralna analiza chemiczna
combustible blends
FT-Raman spectroscopy
spectral chemical analysis
Opis:
The use of mixtures of oil-based fuels with organic chemical components (e.g. ethanol, methanol) has been gaining ground in recent years. Several countries try nowadays to replace part of the fossil fuels for various reasons including economics, sustainability or optimization of resources. The characteristics of these combustiblerelated chemical component blends can be analyzed by different means. Optical spectral analysis (e.g. Raman, Fourier-transforminfrared, etc.) can extract inmany casesmost of the required information concerning themolecular structure of a determined chemical sample in an effective and clean manner. Experimental detailed Raman spectra fromvarious gasoline-ethanol blends and a gasoline-ethanolmethanol blend are presented. The Raman spectral information obtained has been used for approximated quantitative analysis with no additional chemical marker or complicated calibration methods. The analysis has been performed using a self-designed, low-cost, robust and frequency precise Fourier transform Raman (FT-Raman) spectrometer. This proposed FT-Raman spectrometer has been constructed with a Michelson interferometer, an in-house designed photon counter, and a sensitive trans-impedance photo-detector. Additional complex hardware was not used to compensate the mechanical or thermal drifts disturbances in the interferometer. For accurate spectral calculation an interference pattern generated by a low-power Helium-Neon laser (wavelength λ=632.816nm)was used. The resulting spectral data are in the range of 0*cm-1 to 3500*cm-1. The resolution of these Raman spectra is 1.66*cm-1. Higher resolutions are possible since the scanning distances in the Michelson interferometer can be extended substantially before instrumental effects appear. A comparison of the experimental results obtained with standard Raman shift values revealed a satisfactory accuracy and precision in frequency detection.
Źródło:
Environmental Biotechnology; 2012, 8, 1; 1-6
1734-4964
Pojawia się w:
Environmental Biotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modification of the Surface of the Iron Powder as an Ingredient of the High Calorific Mixture
Autorzy:
Czajka, B.
Wachowski, L.
Łapiński, A.
Rzodkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/358561.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
iron powder
Fe-KClO4 mixture
Raman spectroscopy (RS)
ellipsometry
thermo-programmed reduction (TPR)
thermogravimetric analysis
TG/DTA
Opis:
Textural properties of iron powders obtained by reduction of iron(II) compounds and by electrolysis were determined. Their specific surfaces were 0.38 and 0.43 m2g-1 respectively, and the prevailing grain sizes amounted to 10 and 43 ?m respectively. Total content of the determined metallic impurities was 0.055 wt.% in the preparation obtained by the electrolysis while in the preparation obtained by reduction it was 0.025 wt.%. It was proved that in initial samples the α-Fe2O3 phase occurred in the outer oxide layer present on the surface of Fe grains, and below this phase a layer of magnetite was found, the thickness of which was considerably greater in iron obtained by electrolysis. Measurements of selected properties showed that modification of the iron powder surface carried out by reduction with dihydrogen led to decreasing the linear rate of burning of the high calorific mixture Fe/KClO4 but it did not affect its calorific value. Moreover, it was found that modification of the iron powder surface resulted in lowering the temperature of ignition of the analysed mixture and decreasing the quantity of the released oxygen generated by decomposition of the oxidant, which did not react with the iron powder.
Źródło:
Central European Journal of Energetic Materials; 2008, 5, 3-4; 87-102
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
SEM/EDS and Raman Micro-Spectroscopy Examination of Titanium-Modified Polypropylene Fibres
SEM/EDS i mikro-spektroskopia Ramana w analizie włókien polipropylenowych modyfikowanych ditlenkiem tytanu
Autorzy:
Cieślak, M.
Puchowicz, D
Kamińska, I.
Powiązania:
https://bibliotekanauki.pl/articles/233729.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
polypropylene fibre
TiO2/Ag
SEM/EDS analysis
Raman mapping
spektroskopia Ramana
włókna polipropylenowe
modyfikowanie włokien
SEM-EDS
Opis:
In order to impart photo-catalytic properties to fibres, one can modify them by means of titanium dioxide. Such a modification should provide the best effectiveness with no deterioration in the basic properties of the fibres modified. Accordingly the modifiers should be deposited on the surface of fibres instead of adding them to the whole mass of the fibreforming polymer. To characterise polypropylene fibres (PP) modified with titanium dioxide doped with nano silver (TiO2/Ag), Raman micro-spectroscopy and SEM/EDS microanalysis were used. The combination of both techniques in the analysis of the fibre surface and cross-section allows qualitative and structural assessment of the distribution of titania modifier in the fibre.
Do nadawania włóknom funkcji fotokatalitycznych stosuje się modyfikacje ditlenkiem tytanu. Modyfikacja taka powinna zapewnić najlepszą efektywność fotokatalityczną bez pogorszenia podstawowych właściwości modyfikowanych włókien. W związku z tym modyfikator powinien znajdować się na powierzchni włókien, a nie w całej objętości polimeru włóknotwórczego. Do oceny efektu modyfikacji włókien polipropylenowych (PP) ditlenkiem tytanu domieszkowanym srebrem (TiO2/Ag) zastosowano techniki mikro-spektroskopii Ramana oraz elektronowej mikroskopii skaningowej połączonej z mikroanalizą rentgenowską SEM/EDS. Połączenie obu technik do analizy powierzchni oraz przekroju poprzecznego włókien (PP) pozwoliło na ocenę jakościowego i strukturalnego efektu modyfikacji.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 3 (105); 47-53
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Comparative Analysis of Prepared Mixtures of Crambe Abyssinica Seed Oil with Mineral and Synthetic Oil
Analiza porównawcza opracowanych mieszanin oleju z nasion Crambe Abyssinica z olejem mineralnym i syntetycznym
Autorzy:
Drabik, Jolanta
Kozdrach, Rafał
Wolszczak, Marek
Iłowska, Jolanta
Duszyński, Grzegorz
Piątkowski, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/1857783.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
vegetable oil from Crambe Abyssinica seeds
mixture of vegetable and mineral oil
mixture of vegetable and synthetic oil
oxidation stability
antiwear properties
Raman spectrum analysis
thermal extortions
mechanical extortions
olej roślinny z nasion Crambe Abyssinica
mieszanina oleju roślinnego z mineralnym
mieszanina oleju roślinnego z syntetycznym
stabilność oksydacyjna
właściwości przeciwzużyciowe
spektroskopia Ramana
Opis:
The base oils must meet the high technical and ecological requirements for the raw materials used in the production of lubricants. The relevant useful properties can be obtained by mixing the vegetable oil with mineral or synthetic oil. The paper presents the results of tests of mixtures of oil obtained from Crambe Abyssinica seeds with mineral and synthetic oil. A variation of tested mixtures with regard to thermo-oxidative stability and antiwear properties were found. The mixtures with the most favourable properties were recommended as a base oils during the production of ecological lubricants.
Oleje bazowe muszą spełniać wysokie wymagania techniczne i ekologiczne stawiane surowcom wykorzystywanym do produkcji środków smarowych. Odpowiednie właściwości użytkowe można uzyskać przez mieszanie oleju roślinnego z olejem mineralnym lub syntetycznym. W pracy przedstawiono wyniki badań mieszanin oleju pozyskanego z nasion Crambe Abyssinica z olejem mineralnym i syntetycznym. Stwierdzono zróżnicowanie badanych mieszanin pod względem stabilności termooksydacyjnej i właściwości przeciwzużyciowych. Mieszaniny o najkorzystniejszych właściwościach rekomendowano jako oleje bazowe podczas wytwarzania ekologicznych środków smarowych.
Źródło:
Tribologia; 2020, 291, 3; 15-21
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Promoted cobalt oxide catalyst on the metallic structured reactor filling for VOC combustion as an alternative to noble metal catalysts
Autorzy:
Łojewska, J.
Kołodziej, A.
Żak, J.
Powiązania:
https://bibliotekanauki.pl/articles/778425.pdf
Data publikacji:
2007
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
technika Langmuira-Blodgett
nośnik strukturalny
mikroskopia Ramana
analiza ilościowa
Langmuir-Blodgett technique
structured carrier
wash-coat layer
Raman microscopy
XPS quantitative analysis
Opis:
VOC combustion is a demanding process for both the reactor and the catalyst design. As we have proved in recent papers the diffusional limitation of reaction rate that occurs during combustion may be overcome by designing the metallic microstructures used as reactor internals. Their application on an industrial scale depends on the development of an efficient method of catalyst layering on metallic supports and the optimisation of a fine catalyst structure which would not change the elaborated microstructure geometry. In this study we propose the Langmuir-Blodgett (LB) film method to deposit various metals (Al, Co) in the form of catalyst organic precursors. The film forming abilities of the precursors were checked by surface pressure measurements upon film compression, Brewster Angle Microscopy and by the monolayers stability measurements. The amount of the deposited materials was controlled by the LB parameters and verified by the TG measurements. The catalyst obtained in this way were characterized at various stages of the preparation by SEM/XFS, XPS, AFM and RM methods and tested in n-hexane combustion. Oxidation of the Al washcoat precursor led to the formation of γ-Al2O3 improving the properties of the Al2O3 layer (α phase) developed on the pre-calcined CrAl carrier. Oxidation of cobalt stearate deposited on the CrAI produced dispersed Co3O4 spinel. The cobalt catalysts were active in combustion showing resistance to sintering. Compared to standard Pt supported catalyst it demonstrated twice as low activation energy (50 kJ/mol).
Źródło:
Polish Journal of Chemical Technology; 2007, 9, 1; 15-19
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza nieorganicznych i organicznych pozostałości po wystrzale z broni palnej.
Analysis of inorganic and organic remains after firearms discharge.
Autorzy:
Łasińska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/501767.pdf
Data publikacji:
2017-03-15
Wydawca:
Agencja Bezpieczeństwa Wewnętrznego
Tematy:
skaningowa mikroskopia elektronowa,
SEM,
mikroanaliza rentgenowska,
EDS,
pozostałości po wystrzale z broni palnej,
GSR,
spektroskopia Ramana.
scanning electron microscopy,
X-ray analysis,
EDX,
gunshot residue,
Raman spectroscopy.
Opis:
W publikacji przedstawiono rezultaty pilotażowych badań metodą skaningowej mikroskopii elektronowej sprzężonej z mikroanalizą rentgenowską oraz spektroskopii Ramana. Wykazano możliwość identyfikacji składników nieorganicznych oraz niektórych związków organicznych zawartych w pozostałościach powystrzałowych, a także wprowadzono nowy element badawczy w postaci mapowania zmian intensywności pasm niektórych grup funkcyjnych substancji organicznych obecnych w pojedynczym ziarnie. Celem badań jest stopniowe i systematyczne opracowywanie metodyki analizy chemicznej cząstek powystrzałowych pochodzących z amunicji zawierającej ołów oraz z amunicji bezołowiowej, a także opracowanie procedur badawczych dotyczących oznaczania pozostałości po użyciu z broni palnej, w tym typowanie rodzaju materiałów dowodowych i materiału porównawczego oraz wdrożenie ich do rutynowej praktyki opiniodawczej w Biurze Badań Kryminalistycznych ABW. Wskazane jest także opracowanie własnych kryteriów interpretacji wyników badań pozostałości powystrzałowych w celu powiązania osoby podejrzanej z użyciem broni palnej. Należy zaznaczyć, że zrealizowany eksperyment jest jedynie wstępem do podjęcia dalszych, bardziej zaawansowanych badań, prowadzących do identyfikacji, klasyfikacji oraz dyskryminacji mikrośladów pochodzących z przestępstw z udziałem broni.
The paper describes the results of the Raman spectroscopy and scanning electron microscopy equipped with X-ray in the primary analysis of gunshot residues. It demonstrates the ability to identify inorganic components and the organic compounds contained in the gunshot residue, and also introduces a new element of the research in the form of mapping changes in the intensity of bands of some functional groups of organic substances to be found in a single grain. The aim of the research is a gradual and systematical elaboration of the methodology of chemical analysis of gunshot residue particles, originating from ammunition containing lead and unleaded ammunition. Further aim is to develop the testing procedures remains with use of firearms and their implementation in consultative routine practice in the Forensic Laboratory ABW, choosing the type of evidence and comparative materials. In order to relate the person suspected to fact of using firearms, it is advisable to elaborate individual criteria of interpreting the results of gunshot residues study. It should be noted that the conducted experiment determines only a prelude for conducting more advanced researches which lead to the identification, classification and discrimination of microtraces originated from crime use of firearms.
Źródło:
Przegląd Bezpieczeństwa Wewnętrznego; 2017, 9, 16; 157-189
2080-1335
2720-0841
Pojawia się w:
Przegląd Bezpieczeństwa Wewnętrznego
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies