Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Q-switching" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Modeling and optimization of the YAG:Yb microchip laser passively Q-switched by YAG:Cr absorber
Autorzy:
Buryy, O
Ubizskii, S
Powiązania:
https://bibliotekanauki.pl/articles/175041.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Yb:YAG crystal
microlaser
Q-switching
numerical simulation
Opis:
Based on analytical and numerical solutions of the rate equations system and the heat conductivity equation, the model of the quasi-three-level passively Q-switched YAG:Yb/YAG:Cr microchip laser is developed. The obtained results are used for its optimization, i.e., for the determination of the output mirror reflectivity, the pumping beam radius, the thickness of the absorber and the phototropic centers concentration maximizing the energy in the laser pulse. The influence of the thermal load on the spatial parameters of the laser beam is also determined.
Źródło:
Optica Applicata; 2014, 44, 4; 621-636
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laser Nd:YAG generujący na długości fali 1,32 žm
Generation at 1.32 žm in Nd:YAG laser
Autorzy:
Ostrowski, R.
Cywiński, A.
Powiązania:
https://bibliotekanauki.pl/articles/159782.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
laser 1,32 µm
modulacja dobroci rezonatora
laser Nd:YAG
rezonator dyspersyjny
1.32 mm laser
Q-switching
Nd:YAG laser
dispersive resonator
Opis:
W pracy opisano monoimpulsowy laser Nd:YAG, generujący promieniowanie o długości fali 1,319 žm, do zastosowań w medycynie i renowacji zabytków. Odpowiednio dobrany rezonator pozwolił uzyskać wiązkę wyjściową w modzie podstawowym. Metodami Findlay - Clay'a i Hodgson - Weber'a wyznaczono straty rezonatora, wynoszące 0,3. Ich znajomość oraz wiedza o współczynniku wzmocnienia w ośrodku aktywnym pozwoliła zoptymalizować rezonator. W reżimie generacji swobodnej laser emitował impulsy o energii ponad 200 mJ ze sprawnością różniczkową około 14%. W reżimie modulacji dobroci uzyskano impulsy o energii do 40 mJ i czasie trwania około 29 ns FWHM (moc szczytowa ponad 1,3 MW).
A new model of Q-switched Nd:YAG laser operated at 1.319 žm, for medical and restoration applications, has been presented in the paper. Suitably developed resonator allowed to achieve fundamental mode at the output. By means of Findlay-Clay and Hodgson-Weber methods, passive loses of the resonator have been determined to be 0.3 (i.e. 86% single pass transmission). In free running mode, laser pulses over 200 mJ in energy with slope efficiency about 14% have been obtained, while in Q-switched mode, single pulses of energy up to 40 mJ and durations about 29 ns FWHM (peak power over 1.3 MW) have been generated.
Źródło:
Prace Instytutu Elektrotechniki; 2012, 255; 145-160
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Generacja na linii 1,32 µm w laserze Nd:YAG
Generation at 1.32 µm in Nd:YAG laser
Autorzy:
Ostrowski, R.
Cywiński, A.
Powiązania:
https://bibliotekanauki.pl/articles/208558.pdf
Data publikacji:
2012
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
optoelektronika
laser 1,32 µm
modulacja dobroci rezonatora
laser Nd:YAG
rezonator dyspersyjny
optoelectronics
1.32 µm laser
Q-switching
Nd:YAG laser
dispersive resonator
Opis:
W pracy opisano model monoimpulsowego lasera Nd:YAG, generującego promieniowanie o długości fali 1,319 µm do zastosowań w medycynie i renowacji zabytków. Odpowiednio dobrany rezonator pozwolił uzyskać wiązkę wyjściową w modzie podstawowym. Metodami Findlaya-Claya i Hodgsona-Webera wyznaczono pasywne straty rezonatora, wynoszące 0,3 (transmisja rezonatora 86%). Znajomość strat oraz współczynnika wzmocnienia w ośrodku aktywnym pozwoliła zoptymalizować rezonator. W reżimie generacji swobodnej laser emitował impulsy o energii ponad 200 mJ ze sprawnością różniczkową w okolicach 14%. W reżimie modulacji dobroci otrzymywano natomiast impulsy o energii do 40 mJ i czasie trwania około 29 ns FWHM (moc szczytowa ponad 1,3 MW).
A new model of Q-switched Nd:YAG laser operated at 1.319 µm, for medical and restoration applications, has been presented in the paper. Suitably developed resonator allowed us to achieve fundamental mode at the output. By means of Findlay-Clay and Hodgson-Weber methods, passive loses of the resonator have been determined to be 0.3 (i.e. 86% single pass transmission). In free running mode, laser pulses over 200 mJ in energy with slope efficiency about 14% have been obtained, while in Q-switched mode, single pulses of energy up to 40 mJ and durations about 29 ns FWHM (peak power over 1.3 MW) have been generated.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2012, 61, 2; 175-196
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Generation of two identical ns laser pulses at single μs spacing by switching output mirror transmission
Autorzy:
Skórczakowski, Marek
Żendzian, Waldemar
Jankiewicz, Zdzisław
Powiązania:
https://bibliotekanauki.pl/articles/220917.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
double pulse Q-switched laser
pulsed holographic interferometry
transmission losses switching
diode pumped Q-switched laser
Opis:
Generation of two identical ns laser pulses spaced by a single μs time interval by means of sequential switching of the output mirror transmittance in a diode-pumped Nd:YAG laser is reported, to our knowledge, for the first time. The theoretical study of the process of transmission losses switching is developed. This analysis confirms the possibility of generation of two identical Q-switched laser pulses with 100% efficiency with respect to the referenced single pulse energy. The detailed characterization of the laser in free-running, single and double Q-switching regimes is presented. The laser can be applied in different branches of metrology as PIV, LIBS or holographic interferometry.
Źródło:
Metrology and Measurement Systems; 2020, 27, 3; 513-530
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Currents physical components theory and p-q power theory in the control of the three-phase shunt active power filter
Autorzy:
Firlit, A.
Powiązania:
https://bibliotekanauki.pl/articles/262629.pdf
Data publikacji:
2007
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie
Tematy:
active power filter
power theory
p-q power theory
CPC power theory
switching compensators
electric power quality
Opis:
This paper presents the comparison among the control algorithms of a three phase, three wire shunt active power filter. The control algorithms are based on: 1) the current's physical components theory, 2) the p-q power theory. The active power filter operation under the distorted supply voltage at the point of common coupling condition is considered. The comparison concerns the aspects of: filtering current harmonics, reactive power compensation (defined in the fundamental harmonic domain), supply current balancing and dynamic performance. The results of the laboratory investigation, using the fast prototyping system dSPACE, are given in the paper. This paper confirms that the current's physical components theory allows developing the control algorithm of shunt active power filter and its practical implementation. The investigation allows the conclusion that this control algorithm enables achieving the supply system current shape close to the sinusoidal, despite shunt active power filter operation under the distorted supply voltage. A sinusoidal supply current cannot be attained by the control algorithm based on the p-q power theory without some additional control elements, such as: PLL, signal filters, etc. The experiment also has shown that the control algorithm based on the p-q power theory is easier to implement and less demanding in terms of hardware than the control algorithm based on the current's physical components theory.
Źródło:
Electrical Power Quality and Utilisation. Journal; 2007, 13, 1; 59-66
1896-4672
Pojawia się w:
Electrical Power Quality and Utilisation. Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies