Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Piaski" wg kryterium: Temat


Tytuł:
Dilatation of the method of the fixation of moveable sands
Autorzy:
Muzaffarova, Mauzhuda
Powiązania:
https://bibliotekanauki.pl/articles/2203845.pdf
Data publikacji:
2022
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
binders
bitumen
gossypol resin
glue
moveable sands
physicochemical method
lepiszcza
bitum
żywica gossypol
klej
ruchome piaski
metoda fizykochemiczna
Opis:
A new method of physicochemical blocking deflation of movable sands has been developed that represents their fixation in a wet state with binders. It is proposed to carry out sand-fixing works during rainy periods or after preliminary moistening of the sandy surface in order to intensify and reduce the cost of sand-fixing works. The substantiation is carried out on the example of some of the approved and recommended binders based on the express method of studying the possibility of their application to obtain a polymer sandy protective crust on wet sand. The emerging defensive hull is characterized by resistance to wind-sand stream and evaluated by plastic quality and thickness. The impregnation of damp sand with a smaller sum of cover than dry sand is related to an alteration within the nature of impregnation from gravity to capillary. With a decrease in the specific surface of the bulk material and an increase in the pore space, gravitational forces are predominant. The process of wet sand impregnation is associated with the acceleration of the adsorption of the dispersed phase and a reduction in the hole covered due to the partial occupation of the interpore space with water. As a result, in wet sand, the depth of sand impregnation with the binder increases at a lower consumption per unit volume of sand. The following has been established: the possibility of impregnation of approved and recommended binders into wet sand, the inverse dependence of the binder concentration in emulsion forms on the humidity of the sandy surface, the time of application of various binders after moistening the sand and the possible savings of binders.
Źródło:
Transport Problems; 2022, 17, 4; 79--89
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Methyl Silicone Oil to Moisture Resistance of Sodium Silicate Sands by Microwave Hardening
Autorzy:
Wang, Huafang
Gao, Xiang
Yang, Lei
He, Wei
Lu, Jijun
Powiązania:
https://bibliotekanauki.pl/articles/2126894.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium silicate sands
microwave hardening
methyl silicon oils
moisture absorption
piaski sodowo-krzemianowe
hartowanie mikrofalowe
olej metylosilikonowy
wchłanianie wilgoci
Opis:
The sodium silicate sands hardened by microwave have the advantages of high strength, fast hardening speed and low residual strength with the lower addition of sodium silicate. However, the sodium ion in the sands will absorb moisture from the atmosphere, which would lead to lower storing strength, so the protection of a bonding bridge of sodium silicate between the sands is crucial. Methyl silicone oil is a cheap hydrophobic industrial raw material. The influence of the addition amount of methyl silicone oil modifier on compressive strength and moisture absorption of sodium silicate sands was studied in this work. The microscopic analysis of modified before and after sodium silicate sands has been carried on employing scanning electron microscopy(SEM) and energy spectrum analysis(EDS). The results showed that the strength of modified sodium silicate sands was significantly higher than that of unmodified sodium silicate sands, and the best addition of methyl silicone oil in the quantity of sodium silicate was 15%. It was also found that the bonding bridge of modified sodium silicate sands was the density and the adhesive film was smooth, and the methyl silicone oil was completely covered on the surface of the sodium silicate bonding bridge to protect it.
Źródło:
Archives of Foundry Engineering; 2022, 22, 1; 43--47
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kapitan Prot
Autorzy:
Szustakowski, Jacek.
Powiązania:
Polska Zbrojna 2022, nr 3, s. 102-104
Data publikacji:
2022
Tematy:
Dźwigoński, Franciszek (1913-1993)
Zgrupowanie "Żelbet" (Armia Krajowa)
II wojna światowa (1939-1945)
Okupacja niemiecka Polski (1939-1945)
Ruch oporu
Duchowieństwo katolickie
Kapelani
Piłka nożna
Artykuł z czasopisma fachowego
Artykuł z czasopisma wojskowego
Biografia
Opis:
W artykule przedstawiono sylwetkę Franciszka Dźwigońskiego, kapelana z niewielkiej podkrakowskiej wsi Piaski Wielkie. Ksiądz Dźwigoński przyjął pseudonim „Prot”, w czasie II wojny światowej działalność konspiracyjną godził z katechizacją i duszpasterstwem. Prowadził m.in. tajne nauczanie, wybudował ochronkę dla dzieci, zajmował się zbiórka pieniędzy na druk prasy podziemnej i produkcję broni. Został również kapelanem 7 kompanii II Baonu Zgrupowania „Żelbet” AK. Za konspiracyjną działalność został odznaczony Srebrnym Krzyżem Zasługi z Mieczami.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
The Use of Phosphate Binder for Ablation Casting of AlSi7Mg Modified TiB Alloy
Autorzy:
Puzio, Sabina
Kamińska, J.
Major-Gabryś, K.
Angrecki, M.
Powiązania:
https://bibliotekanauki.pl/articles/2126893.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ablation casting technology
alumina
phosphate binder
self-hardening sand
inorganic binder
odlewanie ablacyjne
tlenek glinu
spoiwo fosforanowe
piaski samoutwardzalne
spoiwo nieorganiczne
Opis:
The possibilities of using an inorganic phosphate binder for the ablation casting technology are discussed in this paper. This kind of binder was selected for the process due to its inorganic character and water-solubility. Test castings were made in the sand mixture containing this binder. Each time during the pouring liquid alloy into the molds and solidification process of castings, the temperature in the mold was examined. Then the properties of the obtained castings were compared to the properties of the castings solidifying at ambient temperature in similar sand and metal molds. Post-process materials were also examined - quartz matrix and water. It has been demonstrated that ablation casting technology promotes refining of the microstructure, and thus upgrades the mechanical properties of castings (Rm was raised about approx. 20%). Properties of these castings are comparable to the castings poured in metal moulds. However, the post-process water does not meet the requirements of ecology, which significantly reduces the possibility of its cheap disposal.
Źródło:
Archives of Foundry Engineering; 2022, 22, 1; 62--68
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study of bearing capacity of skirted octagonal footings resting on different sands
Autorzy:
Thakur, A.
Dutta, R.K.
Powiązania:
https://bibliotekanauki.pl/articles/2175811.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
bearing capacity
sands
octagonal footing
singly skirted (SS)
doubly skirted (DS)
nośność
piaski
stopa fundamentowa ośmiokątna
Opis:
Purpose: After a thorough study of literature it is concluded that the studies related to unskirted/skirted octagonal footings on sand have not yet been investigated. Thus, this paper presents a numerical analysis to assess the ultimate bearing capacity of the unskirted, unskirted-embedded, singly and doubly skirted octagonal footings resting on different sands (S1, S2, and S3). The length of skirt and depth of the embedded footing were varied from 0.0B to 1.5B. Design/methodology/approach: The numerical square and octagonal footing with singly and doubly skirted footing models were developed using Plaxis 3D software. Findings: The results of the doubly skirted octagonal footings ultimate bearing capacity were marginally higher in comparison to the singly skirted footing at all normalised skirt depths as well as for all sands up to a Ds/B ratio 0.25 beyond which the increase in the ultimate bearing capacity in case of doubly skirted footing was appreciable. Research limitations/implications: The results presented in this paper were based on numerical analysis. However, for the actual footings the soil placement and compaction, details of skirt construction and the stress level will be different from the numerical analysis. Further investigations using full-scale numerical models simulating field size footings were recommended to generalize the results. Originality/value: No such study on singly and doubly skirted octagonal shaped footings were conducted so far. Hence, an attempt was made in this article to predict the bearing capacity of those footings using Plaxis 3D.
Źródło:
Archives of Materials Science and Engineering; 2021, 107, 1; 21--31
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of bearing capacity of skirted irregular pentagonal footings on different sands
Autorzy:
Thakur, A
Dutta, R. K.
Powiązania:
https://bibliotekanauki.pl/articles/1818797.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
bearing capacity
sands
friction angle
pentagonal footing
singly skirted
doubly skirted
nośność
piaski
kąt tarcia
Opis:
Purpose: The paper presents an experimental and numerical study to evaluate the bearing capacity of unskirted, singly and doubly skirted irregular pentagonal footings on different sands (S1, S2, S3) at a relative density of 30 %. The skirt depth of the footing was varied from 0.0B to 1.5B (B is the width of the square footing). Design/methodology/approach: The experimental and numerical study of the singly and doubly skirted irregular pentagonal footing resting on sands was modelled in a test tank and Plaxis 3D software respectively. Findings: The results of this study reveal that the bearing capacity was higher for the skirted irregular pentagonal footings on sand S3 followed by sand S2 and S1. The lowest percentage improvement for the singly skirted footing on sand S3 was 18.51% at a Ds/B = 0.25 whereas the highest improvement was 90.81% at a Ds/B = 1.50 for the singly skirted footing on sand S2. The highest percentage improvement for the doubly skirted footing on sand S2 was 95.13% at a Ds/B = 1.5 whereas the lowest improvement was 23.70% at a Ds/B = 0.25 the doubly skirted footing on sand S3. The results further revealed that the numerically obtained bearing capacity was marginally higher in comparison to the one obtained experimentally for the footings on all sands. Further, the experimental results validated the results obtained numerically with an average deviation of 8%. The percentage improvement in the bearing capacity was higher for the irregular pentagonal footing resting on sand S2 in comparison to sand S3 and S1. The settlement response of the irregular pentagonal footings is unchanged by increasing the number of elements beyond 7700. Both the experimental and numerical studies revealed a linear elastic behaviour at Ds = 0.5B, while the experimentally obtained pressure-settlement ratio plot shows a clear failure at Ds= 1B and 1.5B. Research limitations/implications: The results presented in this paper were based on the experimental and numerical study conducted on small scale model footings. However, for the actual footings, further study is recommended using full-scale field size footings to generalize the results. Originality/value: No experimental and numerical studies on singly and doubly skirted irregular pentagonal footings were conducted so far. Hence, an attempt was made in this article to predict the bearing capacity of these footings experimentally and using Plaxis 3D respectively.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2021, 105, 1; 5--17
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Forma architektoniczna, funkcja oraz potencjał zespołów budynków wielorodzinnych zbudowanych w XXI wieku w Krakowie na przykładzie osiedli Kurdwanów Nowy i Piaski Nowe
Architectural form, function and potential of multi-family building complexes built in the twenty-first century in Krakow presented on the example of Kurdwanów Nowy and Piaski Nowe estates
Autorzy:
Woźniczka, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/2147165.pdf
Data publikacji:
2020
Wydawca:
Politechnika Krakowska im. Tadeusza Kościuszki. Wydział Architektury. Katedra Kształtowania Środowiska Mieszkaniowego
Tematy:
Kurdwanów
Piaski Wielkie
osiedle wielorodzinne
Kraków
multi-family housing estates
Krakow
Opis:
Piaski Wielkie oraz Kurdwanów to dawne przedmieścia Krakowa, których przestrzeń uległa silnym zmianom w ostatnim półwieczu. Pierwsza fala przemian nastąpiła w latach 70. i 80. kiedy to wzniesiono osiedla Piaski Nowe i Kurdwanów Nowy. Dalszy wzrost liczby mieszkańców Krakowa w XXI wieku, przyczynił się do ponownego skierowania uwagi inwestorów na te obszary. Obecnie tereny te są intensywnie zabudowywane. W niektórych rejonach tempo rozwoju infrastruktury drogowej i usługowej jest wolniejsze niż budowa obiektów mieszkaniowych. Tendencję tę widać w Piaskach Nowych, których funkcjonowanie opiera się głównie na ubiegłowiecznej infrastrukturze. Istotne stało się zbadanie form występujących w osiedlach, ich funkcji i potencjału, co pozwoli prowadzić skuteczną politykę przestrzenną w ich obrębie. Artykuł charakteryzuje formy architektoniczne, układy oraz podstawowe funkcje zespołów mieszkaniowych powstałych w latach 1999–2019 w Piaskach Nowych i Kurdwanowie Nowym. Wykonane badania wykazały, że oba osiedla mają predyspozycję do bycia atrakcyjnymi miejscami zamieszkania. Przyczyniają się do tego istniejące zaplecze usług publicznych oraz rozwijające się usługi prywatne. Ważnym czynnikiem jest też położenie miedzy III i IV obwodnicą Krakowa. Analiza form architektonicznych uwidoczniła zmiany w sposobie kształtowania zabudowy – zauważalna jest tendencja do upraszczania brył. Przedstawione realizacje pokazują, że uproszczenie nie jest jednak równoznaczne z końcem możliwości w kreowaniu form. Jest jedynie drogą do nowych rozwiązań.
Piaski Wielkie and Kurdwanów are former suburbs of Krakow. Over the past half century their space has been changed significantly. The first modifications took place in the 1970s and 1980s. The Piaski Nowe and Kurdwanów Nowy estates were built during this time. In the twenty-first century, the number of inhabitants of Krakow has been constantly increasing. As a result, the attention of real estate developers is once again focused on the regions. At present, these areas are intensively built-up. In some regions, the speed of development of road and service infrastructure is slower than the construction of residential buildings. This tendency can be seen in Piaski Nowe. Last-century projects are the main basis for the functioning of this complex. It is important to determine the forms found in these housing estates, their functions and potential. The results of the research will contribute to effective spatial policy. The article characterises architectural forms, spatial structures and basic functions of housing complexes built in the years 1999–2019 in Piaski Nowe and Kurdwanów Nowy. The research has showed that both estates have a predisposition to be attractive places to live. This fact is supported by existing public service facilities and developing private services. The location between the third and fourth Krakow ring road is also an important factor. An analysis of architectural forms has revealed changes in the way how the buildings are formed. There is a tendency to simplify building massings. The presented projects show that simplification is not synonymous with the end of potential for creating forms. It is just a path to new solutions.
Źródło:
Środowisko Mieszkaniowe; 2020, 31; 82--92
1731-2442
2543-8700
Pojawia się w:
Środowisko Mieszkaniowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Marsz Szlakiem Józefa Franczaka ps. "Laluś"
Autorzy:
Kamela, Michał.
Powiązania:
Wyklęci. Ogólnopolski Kwartalnik Poświęcony Żołnierzom Wyklętym 2020, nr 1, s. 213-216
Data publikacji:
2020
Tematy:
Franczak, Józef (1918-1963)
Marsz Szlakiem Józefa Franczaka "Lalusia" (4 ; 2019 ; Świdnik-Piaski)
Podziemie polityczne i zbrojne (1944-1956)
Żołnierze wyklęci
Upamiętnianie
Turystyka historyczna
Artykuł z czasopisma historycznego
Opis:
Artykuł przedstawia przebieg czwartego Marszu upamiętniającego Józefa Franczaka i jego żołnierzy. Trasa Marszu prowadziła od Świdnika przez Majdan Kozic Górnych do Piasek.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
Extraction, Production and Consumption of Gravel and Sand Aggregates in Poland – an Attempt to Assess National and Regional Balances
Wydobycie, produkcja i zużycie kruszyw żwirowo-piaskowych w Polsce – próba oceny bilansów krajowych i regionalnych
Autorzy:
Kozioł, Wiesław
Baic, Ireneusz
Powiązania:
https://bibliotekanauki.pl/articles/318079.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
piaski
żwiry
kruszywa naturalne
bilans krajowy i regionalny
sands
gravels
natural aggregates
national and regional balances
Opis:
Natural aggregates are the basic group of extracted minerals. In Poland, their share in the extraction of solid minerals over 30 years (1989–2018) increased from about 24% to 54%. Current aggregate production is about 300 million Mg and in 2019 it will probably exceed the record volume of 2011 – over 330 million Mg. In the extraction and production of aggregates in Poland, there is a decisive preponderance of gravel and sand aggregates – their share in the total production of natural aggregates amounts to 70–75%. The remaining part consists of crushed-stone aggregates produced from compact and moderately compact rocks of magma origin (basalts, granites, gabbro and diabases, melaphyres, porphyry, syenites, etc.), sedimentary rocks (dolomites, limestones, sandstones, etc.), and metamorphic rocks (amphibolites, migamatites, gneisses, serpentinites, etc.). A gradual deterioration in the quality of the raw material base of gravel and sands as well as a simultaneous increase in the demand of the construction industry for the best quality thick aggregate fractions (5/8mm, 8/11, etc.) has a significant impact on the rise in the amount of hard to sell and unsalable (waste) fractions of aggregates produced in Poland. This applies especially to gravel and sand aggregates in whose deposit the share of fine fractions (below 2 mm) is systematically increasing, while the demand for them in the construction sector is limited and they are often treated as useless (waste) material. Since it is practically unknown what is the production and consumption of these aggregates, an attempt was made to assess the amount of extracted and produced sand and gravel fractions of natural aggregates in Poland. The deficit of natural aggregates in many countries and regions as well as the limited aggregate resources in Poland and increasing difficulties in obtaining licenses for their extraction indicate the need for selective storage of sand aggregate assortments instead of “melting” them in post-mining excavation pits. The presented research results should contribute to the development of more accurate market forecasts regarding the demand for and production of natural aggregates in Poland and in individual regions, especially when it comes to gravel and sand aggregates, including also fine fractions.
Kruszywa naturalne są podstawową grupą wydobywanych kopalin. W Polsce ich udział w wydobyciu kopalin stałych w ciągu 30 lat (1989–2018) zwiększył się z ok. 24 do 54%. Obecne wydobycie kruszyw wynosi około 300 mln Mg i w 2019 r prawdopodobnie przekroczy rekordową wielkość z roku 2011 – ponad 330 mln Mg. W wydobyciu i produkcji kruszyw w Polsce zdecydowana przewagę mają kruszywa żwirowo- piaskowe, ich udział w produkcji kruszyw naturalnych ogółem stanowi 70–75%. Pozostałą część stanowią kruszywa łamane produkowane ze skał zwięzłych i średnio zwięzłych pochodzenia magmowego (bazalty, granity, gabra-diabazy, melafiry, porfiry, sjenity i in.), osadowego (dolomity, wapienie, piaskowce i in.) i metamorficznego (amfibolity, migmatyty, gnejsy, serpentynity i in.). Stopniowe pogarszanie się jakości bazy surowcowej żwirów i piasków i równocześnie wzrost zapotrzebowania budownictwa na najlepsze jakościowo grube frakcje kruszyw (5/8mm, 8/11, itd.), ma duży wpływ na wzrost frakcji trudno zbywalnych i niezbywalnych (odpadowych) produkowanych kruszyw. Dotyczy to szczególnie kruszyw żwirowo – piaskowych w zasobach których systematycznie wzrasta udział frakcji drobnych (poniżej 2 mm), na które jest ograniczone zapotrzebowanie budownictwa i często traktowane są jako materiał nieużyteczny (odpadowy). Ponieważ praktycznie nie wiadomo jaka jest produkcja i zużycie tych kruszyw podjęto próbę oceny w skali kraju i poszczególnych regionów (województw, stref regionalnych) ilości wydobywanych i produkowanych frakcji piaskowych i żwirowych kruszyw naturalnych w Polsce. Deficyt kruszyw naturalnych w wielu krajach i regionach oraz ograniczone zasoby kruszyw w Polsce i coraz większe trudności z uzyskaniem koncesji na ich wydobycie wskazują na potrzebę selektywnego składowania piaskowych asortymentów kruszyw zamiast ich „topienia” w wyrobiskach poeksploatacyjnych. Wyniki badań powinny przyczynić się do opracowania w następnych latach dokładniejszych prognoz rynkowych zapotrzebowania i produkcji w Polsce i w poszczególnych regionach kruszyw naturalnych w tym szczególnie kruszyw żwirowo – piaskowych z uwzględnieniem również frakcji drobnych.
Źródło:
Inżynieria Mineralna; 2019, 21, 1/2; 65-74
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Use of Floster S Technology in Modified Ablation Casting of Aluminum Alloys
Autorzy:
Kamińska, J.
Angrecki, M.
Puzio, S.
Hosadyna-Kondracka, M.
Major-Gabryś, K.
Powiązania:
https://bibliotekanauki.pl/articles/379813.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
moulding sands
ablation casting
water glass
floster S
mechanical properties of casting
surface quality
piaski formierskie
odlewanie ablacyjne
szklanka wody
właściwości mechaniczne odlewu
jakość powierzchni
Opis:
Ablation casting is a technological process in which the increased cooling rate causes microstructure refinement, resulting in improved mechanical properties of the final product. This technology is particularly suitable for the manufacture of castings with intricate shapes and thin walls. Currently, the ablation casting process is not used in the Polish industry. This article presents the results of strength tests carried out on moulding sands based on hydrated sodium silicate hardened in the Floster S technology, intended for ablation casting of the AlSi7Mg (AK7) aluminium alloy. When testing the bending and tensile strengths of sands, parameters such as binder and hardener content were taken into account. The sand mixtures were tested after 24h hardening at room temperature. The next stage of the study describes the course of the ablation casting process, starting with the manufacture of foundry mould from the selected moulding mixture and ending in tests carried out on the ready casting to check the surface quality, structure and mechanical properties. The results were compared with the parallel results obtained on a casting gravity poured into the sand mould and solidifying in a traditional way at ambient temperature.
Źródło:
Archives of Foundry Engineering; 2019, 4; 81-86
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternatywne kierunki wykorzystania odpadów odlewniczych ze szczególnym uwzględnieniem energetycznego zagospodarowania
Alternative directions for the use of foundry waste, especially for energy management
Autorzy:
Bożym, M.
Powiązania:
https://bibliotekanauki.pl/articles/393992.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
odpady odlewnicze
zużyte piaski formierskie
pyły poregeneracyjne
energetyczne wykorzystanie
agrotechniczne wykorzystanie
foundry waste
spent foundry sands
after reclamation dusts
energy use
Opis:
W artykule przedstawiono kierunki zagospodarowania odpadów odlewniczych, przede wszystkim zużytych piasków formierskich (SFS – Spent Foundry Sands) oraz pyłu po regeneracji mas odlewniczych. Ważnym aspektem ochrony środowiska w produkcji odlewniczej jest ograniczenie ilości wytwarzanych odpadów. Można to osiągnąć poprzez regenerację SFS. Dzięki temu powtórnie wykorzystuje się odpady, co zmniejsza koszty zakupu surowców i opłaty środowiskowe związane z ich składowaniem. Zużyte piaski formierskie, które nie nadają się do powtórnego wykorzystania w odlewniach, mogą być stosowane w innych dziedzinach przemysłu. SFS stosuje się najczęściej w drogownictwie i budownictwie oraz jako materiał inertny do wypełniania nieczynnych kopalni (Smoluchowska i Zgut 2005; Bany-Kowalska 2006). Ciekawym rozwiązaniem jest stosowanie SFS w ogrodnictwie i rolnictwie. W artykule przedstawiono zalety i wady takiego wykorzystania. Stwierdzono, że zużyte piaski formierskie mogą być przydatne do produkcji mieszanek glebowych dla wielu zastosowań rolniczych i ogrodniczych. Ze względu na możliwość zanieczyszczenia środowiska metalami ciężkimi i związkami organicznymi takie stosowanie zaleca się dla tak zwanych green sands, czyli SFS ze spoiwami mineralnymi. Poza tym omówiono – proponowane przez niektórych badaczy – nowatorskie rozwiązanie energetycznego wykorzystania pyłów po regeneracji SFS ze spoiwami organicznymi. Okazuje się, że pyły z regeneracji zużytych piasków formierskich ze spoiwami organicznymi, ze względu na wysoki udział substancji organicznych, decydujących o ich wartości opałowej oraz krzemionki, mogą być wykorzystane jako paliwo alternatywne i surowiec w piecach cementowych.
The article presents the directions of foundry waste management, mainly used for spent foundry sands (SFS) and dust after the reclamation of this waste. An important aspect of environmental protection in foundry production is the reduction of the amount of generated waste as a result of SFS regeneration. The advantage is the reuse of waste, which reduces the costs of raw materials purchase and environmental fees for landfilling. Non -recycled spent foundry sands can be used in other industries. SFS is most often used in road and construction industries as well as inert material in closed mines (Smoluchowska and Zgut 2005; Bany-Kowalska 2006). An interesting direction of using SFS is its application in gardening and agriculture. The article presents the advantages and disadvantages of such use. It was found that spent foundry sands can be useful for the production of soil mixtures for many agricultural and horticultural applications. Due to the possibility of environmental pollution with heavy metals and organic compounds, such an application is recommended for the so-called green sands, i.e. SFS with mineral binders. In addition, an innovative solution for the energy use of dusts after spent foundry sands reclamation with organic binders has been discussed and proposed by some researchers. It was shown that dust from reclaimed SFS with organic binders can be used as an alternative fuel and raw material in cement kilns, due to the high percentage of organic substances which determine their calorific value and silica.
Źródło:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN; 2018, 105; 197-211
2080-0819
Pojawia się w:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Asfalty naturalne – charakterystyka i zastosowanie
Natural asphalts – properties and use
Autorzy:
Bilski, M.
Powiązania:
https://bibliotekanauki.pl/articles/383381.pdf
Data publikacji:
2018
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
asfalt naturalny
klasyfikacja
rozpuszczalność
dwusiarczek węgla
budownictwo drogowe
pirobituminy
piaski roponośne
natural asphalt
classification
solubility
carbon disulfide
road construction
pirobitumines
Opis:
W artykule zostały scharakteryzowane i zilustrowane asfalty naturalne według klasyfikacji ze względu na rozpuszczalność w dwusiarczku węgla. Przegląd asfaltów i źródeł ich pozyskiwania ma na celu usystematyzowanie wiedzy na ten temat pod kątem możliwości zastosowania praktycznego. Przedstawiono przykładowe zastosowania w skali przemysłowej omawiany asfaltów naturalnych ze szczególnym uwzględnieniem ich wykorzystywania w budownictwie drogowym.
The article describes and illustrates natural asphalts according to the classification due to the solubility of carbon disulphide. The review of bitumens and the sources of their acquisition aims to systematize knowledge on this subject in terms of practical application. Exemplary applications on an industrial scale, discussed natural asphalts with particular emphasis on their use in road construction have been presented.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2018, 27; 37-48
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Asfalty naturalne – charakterystyka i zastosowanie
Natural asphalts – properties and use
Autorzy:
Bilski, M.
Powiązania:
https://bibliotekanauki.pl/articles/384029.pdf
Data publikacji:
2018
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
asfalt naturalny
klasyfikacja
rozpuszczalność
dwusiarczek węgla
budownictwo drogowe
pirobituminy
piaski roponośne
natural asphalt
classification
solubility
carbon disulfide
road construction
pirobitumines
Opis:
W artykule zostały scharakteryzowane i zilustrowane asfalty naturalne według klasyfikacji ze względu na rozpuszczalność w dwusiarczku węgla. Przegląd asfaltów i źródeł ich pozyskiwania ma na celu usystematyzowanie wiedzy na ten temat pod kątem możliwości zastosowania praktycznego. Przedstawiono przykładowe zastosowania w skali przemysłowej omawiany asfaltów naturalnych ze szczególnym uwzględnieniem ich wykorzystywania w budownictwie drogowym.
The article describes and illustrates natural asphalts according to the classification due to the solubility of carbon disulphide. The review of bitumens and the sources of their acquisition aims to systematize knowledge on this subject in terms of practical application. Exemplary applications on an industrial scale, discussed natural asphalts with particular emphasis on their use in road construction have been presented.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2018, 27; 25-36
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Złoża piasków kwarcowych w niecce tomaszowskiej, stan i problemy ich dokumentowania
Quartz (glass) sands deposits in Tomaszów syncline and their resources reporting problems
Autorzy:
Poręba, E.
Nieć, M.
Dróżdż, S.
Powiązania:
https://bibliotekanauki.pl/articles/169821.pdf
Data publikacji:
2018
Wydawca:
Poltegor-Instytut Instytut Górnictwa Odkrywkowego
Tematy:
piaski kwarcowe
piaski szklarskie
dokumentowanie złóż
niecka tomaszowska
Polska
quartz sands
industrial sands
glass sands
resources reporting
Tomaszów syncline
Polska
Opis:
W niecce tomaszowskiej występują dolnokredowe piaski i piaskowce kwarcowe. Wyróżniane są jako formacja z Białej Góry, która obejmuje kilka ogniw o zróżnicowanych parametrach jakości kopaliny. Systematyczne prace rozpoznawcze realizowane od połowy XX w. pozwoliły na udokumentowanie wielu złóż w skrzydłach niecki, o łącznych zasobach około 600 mln ton. W złożach zagospodarowanych znajduje się około 27% całości udokumentowanych zasobów. Piaski i piaskowce kwalifikujące się jako szklarskie występują w dwóch ogniwach. Przedzielone są piaskami gorszej jakości. Piaski szklarskie ogniw złożowych, charakteryzują się w przeważającej masie zawartością krzemionki ponad 98%, zawartością Fe2O3 poniżej 0.08% i TiO2 poniżej 0.10%. Piaski, które nie spełnią wymagań stawianych piaskom szklarskim, wykorzystywane są jako formierskie i wysokiej jakości piaski budowlane. Składnikiem podstawowym frakcji ilastych jest kaolinit, uzyskiwany w wyniku płukania piasku. Złoża są udokumentowane na podstawie kryteriów bilansowości niedostosowanych do współczesnych możliwości ich wykorzystania i znaczna część zasobów jest eliminowana jako niekwalifikujące się do zagospodarowania. Złoża powinny być dokumentowane według kryteriów, definiujących warunki brzeżne dla piasków kwarcowych o wielokierunkowym zastosowaniu.
The peculiar feature of Tomaszów Syncline is the occurrence of Lower Cretaceous quartz sand and sandstone. They form Biała Góra composed of five members of sandy deposits of varied industrial utility defined by their chemical parameters. The systematic exploration realized since the mid of XX-th century allow to demonstrate about 600 mln ton of sand resources suitable for mining, located in several areas in the both syncline wings. 27% of them recently occurs in active opencast mines. Quartz sand and sandstones qualified for glass production form two members separated by sand deposits of lower quality deposits. Glass sands are characterized by silica content over 98%, Fe2O3 below 0.08% and TiO2 below 0.10%. Sands of lower quality are utilized as foundry or to production of high quality building materials. In the mud-clay fraction kaolinite occurs, recovered due to the sand washing and utilized as ceramic raw material. The criteria defining boundaries of deposits resources, actually used are incompatible with the recent sand utilization, and considerable quantity of sand is excluded from resources reporting. The new resources criteria should be formulated conformable with multipurpose quartz sand utilization possibilities.
Źródło:
Górnictwo Odkrywkowe; 2018, 59, 3; 84-99
0043-2075
Pojawia się w:
Górnictwo Odkrywkowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Marsz Szlakiem Józefa Franczaka "Lalusia"
Autorzy:
Kamela, Michał.
Powiązania:
Wyklęci. Ogólnopolski Kwartalnik Poświęcony Żołnierzom Wyklętym 2017, nr 4, s. 230-232
Data publikacji:
2017
Tematy:
Franczak, Józef (1918-1963)
Marsz Szlakiem Józefa Franczaka "Lalusia" (1 ; 2016 ; Świdnik-Piaski)
Marsz Szlakiem Józefa Franczaka "Lalusia" (2 ; 2017 ; Świdnik-Piaski)
Żołnierze wyklęci
Patriotyzm
Imprezy plenerowe
Artykuł z czasopisma historycznego
Opis:
Fotografie.
Dostawca treści:
Bibliografia CBW
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies