Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "NOx emissions" wg kryterium: Temat


Tytuł:
Emissions of reactive nitrogen compounds (RNCs) from two vehicles with turbocharged spark ignition engines over cold start driving cycles
Autorzy:
Woodburn, Joseph
Powiązania:
https://bibliotekanauki.pl/articles/2097511.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emissions
reactive nitrogen compounds
NOx
ammonia
nitrous oxide
emisja spalin
reaktywne związki azotu
amoniak
podtlenek azotu
Opis:
This paper reviews the emissions of reactive nitrogen compounds (RNCs) from modern vehicles fitted with spark ignition engines and three-way catalysts. Specific aspects of the pollutants involved - and their formation - are discussed. Cold start driving cycles are scenarios under which emissions of all four RNCs can be significant; the mechanisms behind emissions trends are explored. Experimental data obtained from two vehicles tested over two different cold start driving cycles are presented and analysed. The use of gravimetric and molar metrics are explored. Ammonia, a species which is currently not regulated for passenger cars in any automotive market, is identified as forming the majority of the RNC emissions over the entire driving cycle. While ammonia emissions are strongly linked to aftertreatment system warmup and periods of high load, significant ammonia emissions were also measured under certain hot-running, low load conditions, and even at idle. For the majority of the duration of the test procedures employed, the RNC profile was dominated by ammonia, which accounted for between 69% and 86% of measured RNCs in the exhaust gas. Emissions are compared to the available legislative precedents (i.e. emissions limits currently in force in various jurisdictions). Finally, possibilities for control of exhaust emissions of currently unregulated RNCs are briefly discussed.
Źródło:
Combustion Engines; 2021, 60, 2; 3--9
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plasma technology to remove NOx from off-gases
Autorzy:
Pawelec, Andrzej
Chmielewski, Andrzej G.
Sun, Yongxia
Bułka, Sylwester
Torims, Toms
Pikurs, Guntis
Mattausch, Gösta
Powiązania:
https://bibliotekanauki.pl/articles/2055686.pdf
Data publikacji:
2021
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
electron beam
flue gas treatment
marine diesel engines
NOx
SOx
ship emissions
Opis:
Operation of marine diesel engines causes signifi cant emission of sulphur and nitrogen oxides. It was noticed worldwide and the regulations concerning harmful emissions were introduced. There were several solutions elaborated; however, emission control for both SOx and NOx requires two distinctive processes realized in separated devices, which is problematic due to limited space on ship board and high overall costs. Therefore, the electron beam flue gas treatment (EBFGT) process was adopted to ensure the abatement of the problem of marine diesel off-gases. This novel solution combines two main processes: fi rst the fl ue gas is irradiated with electron beam where NO and SO2 are oxidized; the second stage is wet scrubbing to remove both pollutants with high efficiency. Laboratory tests showed that this process could be effectively applied to remove SO2 and NOx from diesel engine off-gases. Different compositions of absorbing solution with three different oxidants (NaClO, NaClO2 and NaClO3) were tested. The highest NOx removal efficiency (>96%) was obtained when seawater-NaClO2-NaOH was used as scrubber solution at 10.9 kGy dose. The process was further tested in real maritime conditions at Riga shipyard, Latvia. More than 45% NOx was removed at a 5.5 kGy dose, corresponding to 4800 Nm3 /h off-gases arising from ship emission. The operation of the plant was the first case of examination of the hybrid electron beam technology in real conditions. Taking into account the experiment conditions, good agreement was obtained with laboratory tests. The results obtained in Riga shipyard provided valuable information for the application of this technology for control of large cargo ship emission.
Źródło:
Nukleonika; 2021, 66, 4; 227--231
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Diesel Fuel Temperature on the Nitrogen Oxides Emission from a Compression-Ignition Engine
Autorzy:
Czechlowski, Mirosław
Gracz, Weronika
Marcinkowski, Damian
Golimowski, Wojciech
Mazurkiewicz, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/123489.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
compression-ignition engine
NOx emissions
fuel temperature
Opis:
The research aimed at analysing the influence of the diesel oil temperature on the NOx emission level. The tests were carried out on a test stand equipped with a 9.5 kW multi-fuel compression-ignition engine. The setup constitutes an experimental cogeneration unit discharging the produced energy into the power grid. The measurements were carried out under the D1 test procedure provided by ISO 8178–4 for testing engines operating at a constant speed. As a result of statistical analysis of the results obtained, significant differences were found in the u specific values of the nitrogen oxides emission gained for particular phases of D1 tests, when the engine was fed with diesel fuel of different temperatures. The results obtained confirmed the possibility of limiting the specific emission of NOx only when the engine is running at 75% of its nominal torque. An increase in the NOx emissions was recorded for the remaining loads.
Źródło:
Journal of Ecological Engineering; 2020, 21, 3; 164-170
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Defining the mathematical dependencies of NOx and CO emission generation after biomass combustion in low-power boiler
Autorzy:
Lukáč, Ladislav
Kizek, Ján
Jablonský, Gustáv
Karakash, Yevgeniy
Powiązania:
https://bibliotekanauki.pl/articles/396368.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
wood chips
biomass combustion
emissions CO
emission NOx
wood chips moisture content
mathematical dependence of emission
low power boiler
zrębki drzewne
spalanie biomasy
emisja CO
emisja NOx
wilgotność zrębków drzewnych
matematyczna zależność emisji
kocioł małej mocy
Opis:
The paper deals with the study of the influence of various factors, which have an impact on emissions such as NOx, CO, which have been verified by measurements. Biomass in the form of wood chips as fuel of different moisture content from 9% to 25% has been tested at various boiler outputs. The presented work also defines the mathematical dependencies of NOx and CO emission generation by using regression analysis from measured data after biomass combustion in low-power boilers. The paper also describes a mathematical model of biomass combustion. The mathematical model was created to verify the measured data and prediction of emission generation in the process of biomass combustion. This model consists of combustion of stoichiometry, calculation of combustion temperatures, obtained regression equations of NOx and CO. At the end of this paper, the obtained results are compared with the calculated models as well as the results of the defined dependencies from the regression analysis.
Źródło:
Civil and Environmental Engineering Reports; 2019, 29, 3; 153-163
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Duel fuel compression ignition engine fuelled with homogeneous mixtures of propane and kerosene-based fuel
Autorzy:
Skrzek, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/133333.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
dual-fuel engine
kerosene-based fuel
propane
HCCI process
low NOx emissions
silnik dwupaliwowy
paliwo na bazie nafty
propan
spalanie mieszanki jednorodnej
niska emisja NOx
Opis:
The paper presents some results of examination of DF CI engine fuelled with kerosene-based fuel (Jet A-1) and propane. The aim was to obtain the maximum engine thermal and overall efficiency and checking the engine emissions for the application of significant share of propane as a main source of energy. The fuel which initiates the ignition was Jet A-1 provided by common rail system during the beginning of compression stroke. Propane was provided to inlet manifold in a gas phase. The method of providing of both fuels to the engine cylinder allowed to create nearly homogeneous mixture and realized HCCI process for dual fuelling with Jet A-1 and propane. It was possible to compare two combustion strategies PCCI and HCCI for fuelling of CI engine with single fuel (Jet A-1) and dual fuelling with Jet A-1 and propane. The results of experiment show that the NOx and soot emissions are much lower than for standard CI or SI engines. The results also show very interesting potential role of propane in control of HCCI dual fuel combustion process which gives the new perspective of dual fuel engine development. The low levels of toxic components in exhaust gases encourage to test and develop this type of fuelling which could radically confine the negative influence on the environment as well as enable to apply an alternative fuels.
Źródło:
Combustion Engines; 2019, 58, 3; 191-197
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of flame temperature and soot amount for effective NOx and PM reduction in a heavy duty diesel engine
Autorzy:
Aoyagi, Yuzo
Powiązania:
https://bibliotekanauki.pl/articles/132846.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
Diesel engine
exhaust emissions
NOx
PM
EGR
BSFC
flame temperature
two-color method
video camera
silnik Diesla
emisje spalin
temperatura płomienia
metoda dwubarwowa
kamera wideo
Opis:
To reduce exhaust NOx and smoke, it is important to measure flame temperature and soot amount in combustion chamber. In diesel combustion it is effective to use the two-color method for the measurement of the flame temperature and KL factor, which is related with soot concentration. The diesel flame was directly and continuously observed from the combustion chamber at running engine condition by using a bore scope and a high-speed video camera. The experimental single cylinder engine has 2.0-liter displacement and has the ability with up to five times of the boost pressure than the naturally aspirated engine by external super-charger. The devices of High Boost, Wide Range and High EGR rate at keeping a relatively high excess air ratio were installed in this research engine in order to reduce exhaust NOx emission without smoke deterioration from diesel engines. The video camera nac GX-1 was used in this study. From observed data under the changing EGR rates, the flame temperature and KL factor were obtained by the software of two-color method analysis. The diesel combustion processes are understood well by analyzing high-speed movies of the diesel flame motion and its temperature. The NOx and smoke are mutually related to maximum flame temperature and also it is possible to reduce simultaneously both NOx and soot emissions by high EGR rate in a single cylinder diesel engine.
Źródło:
Combustion Engines; 2019, 58, 4; 32-39
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ paliwa zanieczyszczonego chlorem na trwałość elementów kontroli emisji NOX w silniku o zapłonie samoczynnym
The influence of chlorine-contaminated fuel on NOx emission control elements in compression engine
Autorzy:
Faber, J.
Sala, R.
Krasowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/316194.pdf
Data publikacji:
2018
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
paliwo silnikowe
zanieczyszczenia paliwa
chlor
silnik o zapłonie samoczynnym
awarie silników
emisja tlenków azotu
ograniczenie emisji NOx
skład chemiczny osadów
wymiennik ciepła
EGR
motor fuel
fuel contamination
chlorine
self-ignition engine
engine failure
nitrogen oxides emission
NOx emissions reduction
chemical composition of sediments
heat exchanger
Opis:
W artykule podjęto temat oceny wpływu paliwa, celowo zanieczyszczonego chlorem, na elementy kontroli emisji tlenków azotu NOx w silniku z zapłonem samoczynnym. Jakość stosowanego paliwa ma kluczowe znaczenie dla bezawaryjnej pracy silnika. Do zanieczyszczenia paliwa może dojść głównie na etapie transportu lub przechowywania. Główną uwagę zwrócono na wymiennik ciepła (chłodnicę spalin) EGR, służący recyrkulacji spalin, będąc jednym ze sposobów ograniczenia emisji szkodliwych tlenków azotu. Badania prowadzono w warunkach laboratoryjnych (testy stanowiskowe) w cyklach badawczych składających się z czterech faz. Zastosowano paliwo celowo zanieczyszczone chlorem. Czas trwania badania wyniósł 250 godzin i został przerwany momencie wystąpienia awarii silnika i pojawienia się osadów na wymienniku ciepła EGR. W artykule przedstawiono wyniki badań składu chemicznego osadów, zastosowane metody analizy chemicznej oraz zidentyfikowano źródła i przyczynę pojawienia się osadów.
In paper the impact of intentionally chlorine-contaminated fuel on nitrogen oxides emission control elements in compression engine was described. The quality of fuel used is of key importance for the failure-free operation of the engine. Fuel contamination can occur mainly at the transport or storage stage. The main attention was paid to the EGR heat exchanger, which is used for exhaust gases recirculation, being one of the ways to reduce the emission of harmful NOx. The tests were conducted under laboratory conditions (research engine stand tests) in cycles consisting of four phases. The fuel used was intentionally contaminated with chlorine. The test was interrupted after 250 hours at the engine failure and deposits appearance at the EGR heat exchanger. Test results of chemical composition of deposits, analytical methods used and sources and the cause of deposits appearance were described in present paper.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2018, 19, 6; 414-420, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dedicated exhaust gas recirculation in spark ignition engines
Autorzy:
Rehan, S.
Powiązania:
https://bibliotekanauki.pl/articles/103305.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
exhaust gas recirculation
NOx emissions
spark ignition engines
Opis:
The impact of high levels of exhaust gas recirculation (EGR) has been well documented to decrease fuel consumption and reduce emissions of spark ignition engines. But there are also many limitations associated with this technology like EGR control and tolerance, which can reduce the potential efficiency improvements. A new concept called D-EGR has been presented in which the exhaust from a sub group of power cylinders is channeled back to the intake of all the cylinders. In this literature review both experimental and numerical analysis of this technology is shown. In the former case experiments were performed on 2.0 L PFI engine with gasoline as a fuel in part and high load conditions and the results show that at part loads the D-EGR engine can lead to lower Brake Specific Fuel Consumption, lower HC and CO emissions and higher brake thermal efficiency. At high load operations the results show improved combustion stability and superior knock tolerance. In the numerical studies it shows comparable thermal efficiency with conventional spark ignition (SI) engines and reduction in NOX emissions.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 2; 44-50
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Investigation on Hydrodynamic Combustion and NO_x Emission Behavior in 8 MW Circulating Fluidized Bed
Autorzy:
İpek, O.
Gürel, B.
Kan, M.
Powiązania:
https://bibliotekanauki.pl/articles/1031746.pdf
Data publikacji:
2017-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
circulating fluidized bed
hydrodynamic analysis
multi-phase flow
NO_x emissions
clean coal
Opis:
Multi-phase flow is one of the types of flow which is frequently observed in natural phenomena and engineering applications. Circulating fluidized beds constitute an important application of multi-phase flow. The combustion and emission behaviours in circulating fluidized beds are determined by hydrodynamic of bearing. The most appropriate combustion can be provided with the hydrodynamic structure of bearing, taking into account fuel and operating parameters. Therefore, the hydrodynamic structure of circulating fluidized beds should be displayed with mathematical/physical modelling and simulation approach for its analysis and synthesis. Mathematical analysis in today's conditions is very difficult or impossible because of excessive turbulence, unstable and two-phase flow characteristics of the bed. Therefore, the most effective way to do this is the use the physical modelling and simulation approach. In this study, 8 MW circulating fluidized bed hydrodynamic analysis are made by ANSYS-FLUENT R14 commercial CFD code and then combustion and emissions analysis are made with hydrodynamic analysis results. These analysis results show that combustion chamber exit mean NO_x emission was 38.5 ppm and combustion chamber exit mean temperature was 1123 K.
Źródło:
Acta Physica Polonica A; 2017, 132, 3; 553-557
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selektywna redukcja katalityczna tlenków azotu w pojazdach spełniających normę emisji Euro VI
Selective Catalytic Reduction of nitrogen oxides in vehicles complaint to Euro VI emission limit
Autorzy:
Sala, R.
Krasowski, J.
Dzida, J.
Powiązania:
https://bibliotekanauki.pl/articles/315641.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
tlenek azotu NOx
norma Euro VI
spaliny
pojazdy samochodowe
nitrogen oxides NOx
Euro VI
emissions
car vehicles
Opis:
W artykule omówiony został system selektywnej redukcji tlenków azotu w układzie oczyszczania spalin silnika o zapłonie samoczynnym, spełniającym limity normy emisji Euro VI i przeznaczonym do napędu pojazdów ciężarowych oraz autobusów. Przedstawiono wyniki badań emisji tlenków azotu uzyskane w teście homologacyjnym WHTC, który został przeprowadzony w warunkach zimnego oraz ciepłego rozruchu silnika. Układ oczyszczania spalin składał się z reaktora utleniającego (DOC), filtra cząstek stałych (DPF) oraz z systemu selektywnej redukcji katalitycznej (SCR) wraz z układem dozowania wodnego roztworu mocznika. Podczas badań poddano analizie sprawność systemu SCR, określaną jako stopień redukcji szkodliwych tlenków azotu w spalinach, w warunkach dynamicznych zmian obciążeń silnika w teście WHTC. Przedmiotem analizy było ponadto określenie okresu czasu niezbędnego do uzyskania gotowości systemu do rozpoczęcia dozowania mocznika i podjęcia efektywnej pracy po rozruchu zimnego silnika. Zwrócono także uwagę na występujące problemy eksploatacyjne związane z użytkowaniem systemu SCR, takie jak formowanie się osadów stałych mocznika wewnątrz układu i emisja amoniaku za reaktorem. Uzyskane wyniki badań omówiono w aspekcie określenia najlepszej metody oczyszczania spalin z tlenków azotu w silnikach o zapłonie samoczynnym, pod kątem planowego wprowadzenia testów emisji spalin pojazdów w rzeczywistych warunkach drogowych (testy RDE).
The NOx emission aftertreatment of compressed ignition engines has always been a point of concern. The legislative emission limits for heavy duty vehicles constantly tighten the requirements for emissions of NOx. Nowadays it is believed that the most effective and reliable method of NOx reduction is a Selective Catalytic Reduction (SCR) system. The reducing agent of the system is ammonia, delivered and stored on a vehicle as Adblue, an aqueous urea solution. As all catalyst based clean-up systems, SCR activates only when a certain temperature is achieved. Nevertheless, once the system is started, the reduction efficiency of up to 99% can be achieved.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 6; 1052-1056, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Directions in vehicle efficiency and emissions
Autorzy:
Johnson, T. V.
Joshi, A.
Powiązania:
https://bibliotekanauki.pl/articles/133977.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
greenhouse gases
vehicle emissions
regulations
engines
aftertreatment
NOx
diesel oxidation catalyst
selective catalytic reduction
diesel particulate filter
gasoline particulate filter
gazy cieplarniane
przepisy prawne
silniki
katalizator utleniania oleju napędowego
selektywna redukcja katalityczna
filtr cząstek stałych
Opis:
This paper provides a general review of light-duty (LD) and heavy-duty (HD) regulations, engine technology, and key emission control strategies. The US is placing a stronger emphasis on laboratory emissions, and the LD regulations are about an order of magnitude tighter than Euro 6, but Europe is focusing on real-world reductions. The California HD low-NOx regulation is advancing and may be proposed in 2017/18 for implementation in 2023+. The second phase of US HD greenhouse gas regulations propose another 25-30% tightening beyond Phase 1, beginning in 2021. LD and HD engine technology continues showing marked improvements in engine efficiency. LD gasoline concepts are closing the gap with diesel. HD engines are demonstrating more than 50% BTE using methods that can reasonably be commercialized. LD and HD diesel NOx technology trends are also summarized. NOx storage catalysts and SCR combinations are the lead approach to meeting the LD regulations. Numerous advanced NOx technologies are being evaluated and some promise for meeting the California HD low NOx targets. Oxidation catalysts are improved for both diesel and methane oxidation applications. Gasoline particulate filters (GPF) are the lead approach to reducing particles from gasoline direct injection (GDI) engines. They reduce PAH emissions, and catalyzed versions can be designed for low back pressure. Regeneration largely occurs during hot decelerations.
Źródło:
Combustion Engines; 2016, 55, 3; 3-8
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
SCR systems for NOx reduction in heavy and light duty vehicles
Autorzy:
Jaworski, P.
Jarosiński, S.
Cortes Capetillo, A.
Kapusta, Ł. J.
Ziółkowski, A.
Grzywnowicz, R.
Powiązania:
https://bibliotekanauki.pl/articles/133323.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
NOx
SCR
urea
ammonia
exhaust
emissions
aftertreatment
heavy duty vehicle
mocznik
amoniak
wylot
emisja
obróbka następcza
Opis:
Air pollution has become an important worldwide problem. The European Commission credits road and water transport as the major source of NOx pollution, and of being responsible for around 50% of the total air pollution in urban areas. During the last decade, the use of SCR technologies have gained popularity as a method for NOx reduction, the technology is widely considered as one of the solutions for road transport emissions. This paper presents a review of the different SCR system designs derived from the various factors and regulations in the automotive industry which have influenced the technology, along with a parametric study of a proprietary SCR system for heavy duty application.
Źródło:
Combustion Engines; 2016, 55, 1; 32-36
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigation on diesel combustion and emissions with a standard combustion model and detailed chemistry
Autorzy:
Pyszczek, R.
Schmalhorst, C.
Teodorczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/133708.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel
n-heptane
ECFM-3Z model
combustion
emissions
soot
NOx
EGR
post-injection
olej napędowy
n-heptan
spalanie
emisja
sadza
Opis:
The aim of this study was to determine possibilities of the soot and NOx emissions reduction from an existing heavy-duty compression-ignition (CI) engine based only on in-cylinder techniques. To that end numerical simulations of such processes as a multiphase fuel flow through injector nozzles, a liquid fuel jet breakup and evaporation, combustion and emissions formation were performed in AVL Fire 3D CFD software. The combustion process was calculated with the ECFM-3Z model and with the detailed n-heptane oxidation scheme that consisted of 76 species and 349 reactions. Both approaches of combustion modeling were validated against experimental data from the existing engine working under 75% and 100% loads. As for the reduction of the NOx emission an introduction of exhaust gas recirculation (EGR) was investigated. As for the soot concentration reduction such measures as an increased rail pressure, application of a post-injection and an increased injector nozzles conicity were investigated. Finally the ECFM-3Z model with emissions models, as well as the n-heptane mechanism predicted that it is possible to reach specified emissions limits with application of EGR, post-injection and increased nozzles conicity.
Źródło:
Combustion Engines; 2015, 54, 3; 19-33
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
SCR systems for NOx reduction in heavy duty vehicles
Autorzy:
Jaworski, P.
Kapusta, Ł. J.
Jarosiński, S.
Ziółkowski, A.
Cortes Capetillo, A.
Grzywnowicz, R.
Powiązania:
https://bibliotekanauki.pl/articles/245426.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
NOx
SCR
urea
ammonia
exhaust
emissions
aftertreatment
heavy-duty vehicle
Opis:
Air pollution has become an important worldwide problem. The European Commission credits road and water transport as the major source of NOx pollution, and of being responsible for around 50% of the total air pollution in urban areas. In Poland, around 45% of the country NOx emissions are attributed to transportation. During the last decade, the use of SCR technologies have gained popularity as a method for NOx reduction, the technology is widely considered as one of the solutions for road transport emissions. SCR technology had previously been employed in stationary plants, maritime transportation and other installations using combustion processes in which exhaust conditions are easier to control. The advance on the technology led to the introduction of the first heavy-duty vehicle with an SCR system into the market in 2004. New technologies and applications are constantly appearing, for example, SCR exhaust gas cleaning systems for reciprocating engines are still under development and compression ignition engines can be found in a number of different applications. The technology still needs to be studied and improved as constant problems and knowledge is required in issues such as urea injection, crystallization and NOx reduction efficiency. Moreover, the designs intended for heavy duty vehicles need to meet vehicle limitations and EURO emissions restrictions. This paper presents a review of the different SCR system designs derived from the various factors and regulations in the automotive industry, which have influenced the technology, along with a parametric study of a proprietary SCR system for heavy-duty application.
Źródło:
Journal of KONES; 2015, 22, 4; 139-146
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An overview of emissions of reactive nitrogen compounds from modern light duty vehicles featuring SI engines
O emisji reaktywnych związków azotu w spalinach nowoczesnych pojazdów samochodowych z silnikiem o zapłonie iskrowym
Autorzy:
Bielaczyc, P
Szczotka, A.
Woodburn, J.
Powiązania:
https://bibliotekanauki.pl/articles/133541.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
spark ignition engines
ammonia
NOx
nitrous oxide
reactive nitrogen compounds
unregulated emissions
silnik samochodowy o zapłonie iskrowym
amoniak
tlenki azotu
reaktywne związki azotu
nielimitowane związki szkodliwe
Opis:
This paper examines emissions of reactive nitrogen compounds in the exhaust gas flux of vehicles featuring spark ignition (SI) engines. A range of technical, legal and environmental aspects are considered. A discussion of the fundamentals of the phenomenon of emission of these compounds is presented, together with a brief summary of the negative environmental impacts of these gases. Selected data obtained during chassis dynamometer testing at BOSMAL are presented, together with certain important observations presented in the technical literature. The reader is directed to recent publications of note for further information on emissions to the less well known reactive nitrogen compounds, namely NH3 and N2O. The orders of magnitude of the various reactive nitrogen compounds found in the exhaust gas emitted from SI engines are briefly considered and commented upon. Data are presented on the impact of different fuel types used in SI engines and the reader is directed to various publications on that subject. Finally, important research directions (both current and future) are identified.
W artykule zawarto analizę problematyki emisji reaktywnych związków azotu w spalinach silników samochodowych o zapłonie iskrowym (ZI). Omówiono przyczyny powstawania tych związków w spalinach silnikowych, ich emisję oraz negatywny wpływ na środowisko. Przedstawiono wybrane wyniki badań emisji reaktywnych związków azotu w odniesieniu do pojazdów zasilanych paliwami konwencjonalnymi i alternatywnymi, uzyskane w testach emisji na hamowni podwoziowej. Prezentowane wyniki porównano do wyników z tego zakresu opisanych w literaturze. Przedstawiono obecne i przyszłe kierunki badań emisji związków azotu w spalinach silnikowych.
Źródło:
Combustion Engines; 2014, 53, 4; 48-53
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies