Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "NEDC" wg kryterium: Temat


Wyświetlanie 1-15 z 15
Tytuł:
Analiza wielkości emisji spalin z silnika o zapłonie samoczynnym z wykorzystaniem symulacji komputerowej
Analysis of the Exhaust Gas Emission Level from a Diesel Engine with Using Computer Simulation
Autorzy:
Tucki, K.
Mruk, R.
Bączyk, A.
Botwińska, K.
Woźniak, K.
Powiązania:
https://bibliotekanauki.pl/articles/1813749.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
emisyjność
NEDC
WLTP
emission
Opis:
W pracy przedstawiono symulacje emisyjności cząstek stałych i całkowitej zawartości węglowodorów na przykładzie silnika o zapłonie samoczynnym 1.3 Multijet w samochodzie osobowym Fiat Panda. Analizie poddano wyniki pozyskanych zawartości masowych w odniesieniu do testów, paliw oraz aktywności układu start/stop w pojeździe. Próby zostały wykonane dla dwóch typów zasilania: olejem napędowym oraz estrami metylowymi kwasów tłuszczowych. Wykorzystując środowisko Scilab opracowano model symulacyjny, pozwalający na wykonanie ostatecznych testów: WLTP oraz NEDC. Zostały one przeprowadzone dla każdego z paliw z włączonym i włączonym układem start-stop. Efekty symulacji zostały przedstawione w formie wykresów wygenerowanych z programu Xcos.
The emissivity simulations of solid and unburned particles on the example of 1.3 Multijet compression-ignition engine in the Fiat Panda passenger car were presented in the study. The results of the obtained mass contents were analysed in relation to tests, fuels and the activity of the start/stop system in the vehicle. The tests were carried out for two types of supply: diesel oil and fatty acid methyl esters. Using the Scilab programme, a simulation model was developed for the performance of the final tests: WLTP and NEDC. They were performed for each fuel with the enabled and disabled start-stop system. The results of the simulations were presented in the form of diagrams generated by the Xcos programme.
Źródło:
Rocznik Ochrona Środowiska; 2018, Tom 20, cz. 2; 1095-1112
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Factors that influence solid particles emission and methods of their limitation
Czynniki wpływające na emisję cząstek stałych oraz metody ich ograniczenia
Autorzy:
Jakóbiec, J.
Wądrzyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/93511.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
engine
fuel
DPF filter
NEDC test
silnik
paliwo
filtr DPF
test NEDC
Opis:
Renewable energy constitutes an effective tool in the struggle with a danger of global climate warming. The next solution in this fight is development of the construction of combustion engines and exhaust gas purification systems such as new catalysts and particulate filters (DPF). The paper presents the author’s own research results of the measurement of toxic components of exhaust gas emission, in particular (NOx and PM) in delivery trucks which meet the requirements of environmental protection Euro 4, which were propelled with diesel oil – petroleum – derived and with biofuel B10. The above vehicles were operated in a horticultural farm. Measurement of toxic components emission NOx and PM from the operated vehicles was carried out pursuant to the European standards i.e. the New European Driving Cycle with the use of a dynamometer Schenck 500G S60. The obtained results proved that the efficiency of the particulate filter and the operation of the catalytic converter for both types of fuels were comparable.
Energia odnawialna stanowi skuteczne narzędzie w walce z niebezpieczeństwem globalnego ocieplania klimatu. Kolejnym rozwiązaniem w tej walce to rozwój konstrukcji silników spalinowych i układów oczyszczania spalin jak nowe katalizatory i filtry cząstek stałych (DPF). W pracy zamieszczono własne wyniki badań pomiaru emisji toksycznych składników spalin zwłaszcza (NOx i PM) w samochodach dostawczych spełniających wymagania ochrony środowiska Euro 4, które były napędzane olejem napędowym (ON)- paliwo ropopochodne i biopaliwem B10. Powyższe pojazdy eksploatowano w gospodarstwie sadowniczym. Pomiar emisji toksycznych składników NOx i PM z eksploatowanych pojazdów przeprowadzono według standardów europejskich tj. europejskiego cyklu jezdnego NEDC z wykorzystaniem hamowni podwoziowej typu Schenck 500G S60. Uzyskane wyniki wykazały, że sprawność filtra cząstek stałych oraz pracy reaktora katalitycznego dla obu rodzajów paliw były porównywalne.
Źródło:
Agricultural Engineering; 2014, 18, 3; 49-56
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ stopnia naładowania akumulatorów na warunki pracy napędu hybrydowego w teście NEDC
Impact of the state of charge of the battery on hybrid drive in NEDC test conditions
Autorzy:
Pielecha, I.
Czajka, J.
Wisłocki, K.
Borowski, P.
Cieślik, W.
Powiązania:
https://bibliotekanauki.pl/articles/250433.pdf
Data publikacji:
2013
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
test NEDC
napęd hybrydowy
poziom naładowania akumulatora
NEDC test
hybrid vehicle
state of charge
Opis:
W artykule przedstawiono analizę pracy napędu hybrydowego w warunkach testu jezdnego NEDC. Przedstawiono sposoby pracy tego układu podczas zróżnicowanego stanu początkowego naładowania wysokonapięciowych akumulatorów. Warunki takie generują różne możliwości pracy napędu powodując określone skutki przepływu energii. Badania prowadzono przy wykorzystaniem napędu hybrydowego Toyoty Prius z silnikiem spalinowym o pojemności 1,5 dm3 na hamowni podwoziowej. Określono czas, po którym następuje jednakowe naładowanie akumulatorów niezależnie od ich stanu początkowego. Przeprowadzono analizę pracy silnika spalinowego i silników elektrycznych oraz dokonano bilansu energii napędu hybrydowego w teście jezdnym NEDC.
The paper presents an analysis of the hybrid drive in the NEDC driving test conditions. The conditions of employment hybrid powertrain while varying the initial state of charge of the high voltage battery. These conditions generate different states of the drive causing certain effects of energy flow. The study was conducted using the second generation hybrid Toyota Prius of an engine with a 1.5 3 capacity. Specified time, followed by the same battery charge regardless of the initial state. An analysis of electric motors and made the hybrid energy balance in the NEDC test.
Źródło:
TTS Technika Transportu Szynowego; 2013, 10; 1261-1269, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania emisji spalin w teście NEDC wykonane na dynamicznym silnikowym stanowisku hamulcowym
Exhaust emission in NEDC test simulated at a dynamic engine test bed
Autorzy:
Fuć, P.
Merkisz, J.
Lijewski, P.
Bajerlein, M.
Ziółkowski, A.
Rymaniak, Ł.
Dobrzyński, M.
Powiązania:
https://bibliotekanauki.pl/articles/133287.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
hamownia dynamiczna
test NEDC
emisja gazów wylotowych
dynamic engine test bed
New European Driving Cycle
NEDC test
exhaust emission
Opis:
W artykule przedstawiono badania emisji gazów wylotowych w teście NEDC (New European Driving Cycle) odwzorowanym na silnikowym stanowisku hamulcowym wyposażonym w hamownię dynamiczną AVL DynoRoad 120 będącym w posiadaniu Instytutu Silników Spalinowych i Transportu Politechniki Poznańskiej. Test homologacyjny NEDC odwzorowano na stanowisku przy pomocy oprogramowania symulacyjnego ISAC 400 (Inertia Simulation And Control). W tym programie wyznaczono przebieg testu jako funkcję prędkości od czasu oraz wprowadzono parametry pojazdu samochodowego, w którym stosowany jest silnik spalinowy 1,3 SDE (Small Diesel Engine) – taki, jaki zainstalowano na stanowisku badawczym. Do pomiarów emisji szkodliwych i toksycznych składników gazów wylotowych wykorzystano mobilne analizatory: SEMTECH DS i AVL Micro Soot Sensor.
The paper presents results of exhaust emission tests carried out in compliance with NEDC (New European Driving Cycle) and simulated at a test bed with AVL DynoRoad 120 dynamometer in the Institute of Combustion Engines and Transportation (Poznan University of Technology). The NEDC homologation test was simulated with the use of ISAC 400 (Inertia Simulation And Control) software. The simulation was based on the velocity in the function of time and on parameters of a car with 1.3 SDE (Small Diesel Engine) – the same engine as at the testbed. For the test a portable exhaust emission analyzers SEMTECH DS i AVL Micro Soot Sensor were used.
Źródło:
Combustion Engines; 2013, 52, 3; 701-707
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The comparison of harmful substances emission from flex-fuel vehicle during NEDC and WLTC test cycles
Autorzy:
Kruczyński, Stanisław
Gis, Wojciech
Zin, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/133887.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
Flex-Fuel
bioethanol fuels
NEDC
WLTC
WLTP
paliwa bioetanolowe
Opis:
The beginning of this article describes the NEDC and WLTC test cycles and basic differences between them. The following presents, the test stand and test objects, which were bioethanol fuels E10, E40 and E85. At the end were presented and discussed results of tests of these fuels in the flex-fuel vehicle in NEDC and WLTC test cycles.
Źródło:
Combustion Engines; 2019, 58, 4; 156-159
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Comparative Analysis of Approval Driving Tests in the Context of Carbon Dioxide Emissions on the Example of Selected Passenger Cars
Analiza porównawcza homologacyjnych testów jezdnych w kontekście emisji dwutlenku węgla na przykładzie wybranych samochodów osobowych
Autorzy:
Tucki, Karol
Mruk, Remigiusz
Botwińska, Katarzyna
Mieszkalski, Leszek
Kulpa, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/1811636.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
engine
CO2 emission
NEDC
WLTP
silnik
emisja CO2
Opis:
This paper presents a comparison of two approval tests for a passenger car, both the current procedure and its predecessor. The car that was the subject of the study received a roadworthiness certificate based on the NEDC test, however, the emission results were compared with the new test procedure. The analysis showed the significance of the "start-stop" system in the conducted tests, however, assuming the original equipment of the car (active "start-stop" system), the WLTP test showed higher CO2 emissions, which did not exceed the permissible emission standard for this model specified in the relevant regulation.
Niniejsza praca przedstawia porównanie dwóch testów homologacyjnych dla samochodu osobowego, zarówno aktualnie obowiązującą procedurę jak i jej poprzednika. Samochód, który był obiektem badań, świadectwo dopuszczenia do ruchu otrzymał na podstawie testu NEDC, jednakże porównano wyniki emisji z nową procedurą testową. Dokonana analiza wykazała istotność systemu „start-stop” w przeprowadzonych badaniach, zakładając jednak oryginalne wyposażenie auta (aktywny układ start-stop) test WLTP wykazał wyższą emisję CO2, jednakże nie przekroczyła ona dopuszczalnej dla tego modelu normy emisyjności określonej w stosownych przepisach.
Źródło:
Rocznik Ochrona Środowiska; 2020, Tom 22, cz. 2; 859-879
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing of the electric vehicle in driving cycles
Autorzy:
Gis, W.
Żółowski, A.
Bocheńska, A.
Powiązania:
https://bibliotekanauki.pl/articles/241833.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
electric vehicles
road transport
environmental protection
FTP
NEDC
Stop&Go
Opis:
The energy consumption of the car depends on traffic conditions and the car characteristics, speed and motion resistance such as rolling resistance, the slope angle, wind speed, etc. Vehicle speed determines the energy consumption in the vehicle in the comparable moving conditions. It is necessary to perform the research in a number of tests corresponding to the different traffic conditions to widen the knowledge beyond that from type-approval tests. The article presents energy consumption studies of electric passenger car in both approval tests: European – NEDC, American – FTP as well as special tests, for example Stop and Go. The tests were repeated several times, i.e. for different initial levels of battery charge. In addition, tests under real traffic conditions on the big city streets have been conducted. The measurements were made on a Zilent Courant passenger car, produced by Chinese company Shandong Baoya New Energy Vehicle Co. ltd. This is a pure electric vehicle, which meets the conditions for qualifying it as a “pure electric vehicle” in accordance with section 2 of the ECE Regulation no. 101. Courant is a 4-seat vehicle, based on the version of the spark ignition engine. The vehicle is equipped with an electric, brushless engine of 8.5 kW power. Acid-lead batteries provide a nominal voltage of 120 V.
Źródło:
Journal of KONES; 2012, 19, 4; 207-221
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of NEDC and WLTC homologation tests for vehicle tests on a chassis dynamometer
Autorzy:
Gis, M.
Bednarski, M.
Wiśniowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/244934.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
homologation procedure
NEDC test
WLTC test
exhaust emissions
Opis:
In 2015, the number of vehicles in the world exceeded 1.1 billion units. In the coming years, it is expected that the largest increase in the number of vehicles will take place in developing countries. This is a problem in particular in terms of emissions of harmful substances from vehicles. Considering that all manufactured vehicle models have to undergo a detailed homologation and meet the exhaust emission requirements before placing on the market, it is necessary to refine test procedures, including test cycles, in which vehicle emissions are determined. At present, the NEDC approval test is valid in Europe. It is a cycle reproduced on a chassis dynamometer in steady conditions. It consists of an urban section repeated four times and an extra urban part. From 2019, a new test procedure will take effect, which uses the WLTC cycle, also reproduced on a chassis dynamometer in fixed conditions. It is much more complex and better reflects the real traffic conditions. For a better illustration of the differences that occur between the current NEDC cycle and the new WLTC, the article presents a comparative analysis of both driving cycles. This is to present the justifiability of using a new driving cycle and to present its complexity. The article presents own research of a vehicle with a spark-ignition engine, which has been tested both in the NEDC and WLTC cycle. On the basis of the obtained data, it was possible to determine the differences in the emission of harmful exhaust gas components and indicate how the new homologation procedure affects the emissions from the vehicle.
Źródło:
Journal of KONES; 2018, 25, 3; 189-196
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania samochodu z silnikiem JTS - systemem elektronicznego sterowania bezpośrednim wtryskiem benzyny
Vehicle research with JTS engine - electronic control system of gaslin direct injection
Autorzy:
Putz, Ł.
Jarmuda, T.
Powiązania:
https://bibliotekanauki.pl/articles/376096.pdf
Data publikacji:
2013
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
system bezpośredniego wtrysku benzyny
JTS
silnik 2.0 JTS
test jezdny
NEDC
Opis:
W artykule zaprezentowano szczegółową analizę systemu bezpośredniego wtrysku benzyny JTS (Jet Thrust Stoichiometric) stosowanego w autach marki Alfa Romeo. W pracy przedstawiono charakterystyczne elementy budowy z opisem ich wpływu na działanie tego typu silnika. Następnie przedstawiono wyniki badań mocy silnika, momentu obrotowego, emisji zanieczyszczeń oraz zużycia paliwa, przeprowadzonych na modelu Alfa Romeo 156 2.0 JTS oraz porównano z wynikami badań odpowiednika o wtrysku pośrednim Alfa Romeo 156 2.0 TS.
The paper presents a detailed analysis of the system of gasoline direct injection JTS (Jet Thrust Stoichiometric) used in Alfa Romeo cars. The article presents the characteristic elements of the construction of a description of their impact on the operation of this type of engines. Then presents the results of engine power, torque, emissions and fuel consumption, carried out on the Alfa Romeo 156 2.0 JTS, and compared with the results of the indirect injection counterpart to Alfa Romeo 156 2.0 TS.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2013, 75; 231-237
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative tests of a passenger car with compression ignition engine on chassis dynamometer during NEDC and WLTC tests and during RDE road test
Autorzy:
Gis, Wojciech
Gis, Maciej
Wiśniowski, Piotr
Bednarski, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/134170.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
emissions
pollutant emissions
particle matter
NEDC
WLTP
RDE
emisje
emisje zanieczyszczeń
emisja zanieczyszczeń
cząstki stałe
Opis:
Air pollution is a challenge for municipal authorities. Increased emission of PM10 and PM2.5 particles is particularly noticeable in Poland primarily the autumn and winter period. That is due to the start of the heating season. According to the above data, road transport accounted for approximately 5% of the creation of PM10 particles, ca. 7% of PM2.5 and approximately 32% for NOx. In Poland, suspended particles (PM10 and PM2.5) cause deaths of as many as 45,000 people a year. The issue of smog also affects other European cities. Therefore, it is necessary to undertake concrete efforts in order to reduce vehicle exhaust emissions as much as possible. It is therefore justifiable to reduce the emission of exhaust pollution, particularly NOx, PM, PN by conventional passenger cars powered by compression ignition engines. Emissions by these passenger cars have been reduced systematically. Comparative tests of the above emission of exhaust pollution were conducted on chassis dynamometer of such passenger car in NEDC cycle and in the new WLTC cycle in order to verify the level of emissions from this type of passenger car. Measurements of fuel consumption by that car were also taken. Emission of exhaust pollution and fuel consumption of the this car were also taken in the RDE road test.
Źródło:
Combustion Engines; 2019, 58, 3; 228-234
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of the throttle inclination characteristics of a SI engine on fuel consumption in driving cycles
Autorzy:
Hennek, K.
Graba, M.
Mamala, J.
Powiązania:
https://bibliotekanauki.pl/articles/133829.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
fuel consumption
driving cycle
NEDC
throttle inclination regulator
simulation
zużycie paliwa
test jezdny
regulator nachylenia przepustnicy
symulacja
Opis:
This dissertation shows the analysis of the selected indicators of the work of a passenger vehicle drivetrain designated with the use of the Road Load Engine Simulator. In a digital simulation, an internal – combustion engine is saved in a form of numerical speed characteristics in the computers memory. Basing on a virtual vehicle, some indicators of the drivetrain of a passenger vehicle have been determined, while driving with five electronic throttle inclination regulator settups. The simulation results of e.g., throttle repeal speeds and fuel consumtion are summarized in a tabular and graphic form and some of them are expressed per 100 kilometer of the distance covered. Both synthetic and real driving cycles were analyzed during the study and their influence on the egines fuel consumption was also shortly described.
Źródło:
Combustion Engines; 2017, 56, 3; 78-83
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ podawania wodoru na poziom zadymienia spalin silnika samochodowego
Effect of hydrogen addition on the engine exhaust smoke level
Autorzy:
Gęca, M.
Majczak, A.
Magryta, P.
Barański, G.
Grabowski, Ł
Biały, M.
Powiązania:
https://bibliotekanauki.pl/articles/311698.pdf
Data publikacji:
2011
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
wodór
silnik z zapłonem samoczynnym
test NEDC
emisja spalin
emisja związków toksycznych
hydrogen
self-ignition engine
exhaust emission
Opis:
W artykule przedstawiono badania poziomu zadymienia i wartości emisji związków toksycznych spalin w przypadku zasilania samochodu wyposażonego w silnik o zapłonie samoczynnym, zwykłym olejem napędowym oraz olejem napędowym z dodatkiem mieszaniny wodorowo-tlenowej (HHO). Badania poziomu zadymienia zostały przeprowadzone dla warunków biegu jałowego oraz w teście jednym NEDC na hamowni podwoziowej. Natomiast wartości emisji związków toksycznych spalin były rejestrowane dla warunków biegu jałowego. Dodatkowo autorzy zmierzyli zużycie paliwa podczas testu NEDC dla zasilania olejem napędowym oraz olejem napędowym z dodatkiem mieszaniny HHO. Mieszanina ta była uzyskiwana na pokładzie badanego samochodu w procesie elektrolizy.
The article presents the study of smoke and toxic compounds gas emissions of vehicle equipped with compression-ignition engine in case of diesel fuel supply and diesel fuel with a mixture of hydrogen with oxygen (HHO supply). Research of the smoke level has been carried out for idle conditions and in a NEDC test on a chassis dynamometer. While the toxic compounds in exhaust gas were recorded for idle conditions. In addition, the authors measured the level of fuel consumption in the NEDC test conditions with diesel fuel supply and diesel fuel with a mixture of HHO supply. This mixture was obtained on vehicle board in process of electrolysis from electricity produced from the alternator or from the external power supply and was dispensed through the solenoid to the engine intake system.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2011, 12, 10; 180-187
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ekologiczne aspekty zasilania silników gazowym paliwem LPG
Ecological aspects of replacing the engines with gas LPG
Autorzy:
Gis, Maciej
Wiśniowski, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1385317.pdf
Data publikacji:
2019
Wydawca:
Polskie Wydawnictwo Ekonomiczne
Tematy:
emisja CO2
instalacja LPG
hamownia podwoziowa
cykl jezdny
NEDC
CO2 emission
LPG
chassis dynamometer
driving cycle
Opis:
Obniżenie emisji CO2 stanowi wyzwanie dla Europy i Świata. Krytyczną wartością jest wzrost średniej temperatury o 1,5 st. C. Transport jest odpowiedzialny za 20–25% emisji dwutlenku węgla. W Polsce znaczącą grupę pojazdów stanowią pojazdy z silnikami zasilanymi dwupaliwowo (benzyna + LPG). Autorzy referatu skupili się na problemie emisji dwutlenku węgla z pojazdów osobowych, których silniki zasilane były gazowym paliwem LPG.
Reducing CO2 emissions is a challenge for Europe and the world. The critical value is an increase in the average temperature of 1.5 deg. C. Transport is responsible for 20-25% of carbon dioxide emissions. In Poland, a significant group of vehicles has dual fuel engines (petrol + LPG). The paper's authors focused on the issue of carbon dioxide emissions from passenger vehicles whose engines were powered by LPG gas.
Źródło:
Gospodarka Materiałowa i Logistyka; 2019, 5; 197-206
1231-2037
Pojawia się w:
Gospodarka Materiałowa i Logistyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reduction of Co2 through application of a highperformance alternator
Autorzy:
Łukasik, Zbigniew
Kozyra, Jacek
Kuśmińska-Fijałkowska, Aldona
Powiązania:
https://bibliotekanauki.pl/articles/2098147.pdf
Data publikacji:
2021
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
CO2 emissions
high-efficiency alternator
energy efficiency
NEDC
measurement
start-stop system
emisja CO2
wysokowydajny alternator
efektywność energetyczna
pomiar
system start-stop
Opis:
Road transport causes emission of 1/5 of the carbon dioxide produced in the European Union. Actions aimed at reduction of emission of CO2 of various vehicles are becoming an increasingly important issue. In this article, the authors present an innovative technology of use of a high-performance alternator in passenger vehicles. They proposed a method of calculating reduction of CO2 through application of a highperformance alternator. Moreover, application of new technology based on the measurements performed in accordance with the guidelines of the New European Driving Cycle allowed calculation of fuel savings and reduction of CO2 emission in road transport.
Źródło:
Transport Problems; 2021, 16, 2; 179--188
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rzeczywista eksploatacja trakcyjna silnika a warunki przyjmowane w teście homologacyjnym
Real engine operating conditions in comparison with these in type approval driving cycle
Autorzy:
Adamski, W.
Brzozowski, K.
Nowakowski, J.
Praszkiewicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/317111.pdf
Data publikacji:
2014
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
rzeczywisty ruch drogowy
silnik o zapłonie iskrowym
test
NEDC
charakterystyka warunków eksploatacji silnika
real traffic conditions
spark ignition engine
driving cycle
characteristic of engine operating conditions
Opis:
W ramach pracy analizowano warunki rzeczywistej eksploatacji trakcyjnej. Przeprowadzono badania drogowe w celu rejestracji parametrów charakteryzujących warunki eksploatacji silnika o zapłonie iskrowym, spełniającego normę emisji spalin EURO 5, będącego źródłem napędu samochodu miejskiego. Badania te zrealizowano w warunkach rzeczywistego ruchu w strumieniu pojazdów. W trakcie jazdy zarejestrowano prędkość ruchu samochodu, prędkość obrotową silnika oraz stopień obciążenia silnika. Opracowanie danych uzyskanych w ramach zarejestrowanych serii pomiarowych pozwoliło na określenie charakterystyki eksploatacji trakcyjnej silnika przy założeniu równościowych udziałów warunków ruchu miejskiego, pozamiejskiego i autostradowego. Uzyskaną charakterystykę porównano z charakterystyką eksploatacji silnika rozpatrywanego samochodu opracowaną na podstawie badań na hamowni podwoziowej zrealizowanych w teście homologacyjnym NEDC.
Paper presents an analysis of engine operating conditions in real traffic. Parameters used to characterization of engine operating conditions were collected by measurements for a urban type car with spark ignition engine which fulfill EURO 5. Measurements were performed in real traffic situations. Instantaneous vehicle velocity, rotational speed of engine and engine’s torque were recorded during car motion. In the next step the characteristic of engine operating conditions was formulated. It was made with assumption of equally part of urban, rural and highway types of motion. Finally the characteristic was compared with other one obtained on the base of test stand measurementsfor the NEDC driving cycle.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2014, 15, 5; 37-40
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-15 z 15

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies