Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Measurement System Analysis" wg kryterium: Temat


Tytuł:
Outlier detection in the analysis of nested Gage R&R, random effect model
Autorzy:
Abduljaleel, Mohammed
Midi, Habshah
Karimi, Mostafa
Powiązania:
https://bibliotekanauki.pl/articles/1192468.pdf
Data publikacji:
2019-08-30
Wydawca:
Główny Urząd Statystyczny
Tematy:
measurement system analysis
mm location
nested Gage R&R
outlier
residuals
Opis:
Measurement system analysis is a comprehensive valuation of a measurement process and characteristically includes a specially designed experiment that strives to isolate the components of variation in that measurement process. Gage repeatability and reproducibility is the adequate technique to evaluate variations within the measurement system. Repeatability refers to the measurement variation obtained when one person repeatedly measures the same item with the same Gage, while reproducibility refers to the variation due to different operators using the same Gage. The two factors factorial design, either crossed or nested factor, is usually used for a Gage R&R study. In this study, the focus is only on the nested factor, random effect model. Presently, the classical method (the method of analysing data without taking into consideration the existence of outliers) is used to analyse the nested Gage R&R data. However, this method is easily affected by outliers and, consequently, the measurement system’s capability is also affected. Therefore, the aims of this study are to develop an identification method to detect outliers and to formulate a robust method of measurement analysis of nested Gage R&R, random effect model. The proposed methods of outlier detection are based on a robust mm location and scale estimators of the residuals. The results of the simulation study and real numerical example show that the proposed outlier identification method and the robust estimation method are the most successful methods for the detection of outliers.
Źródło:
Statistics in Transition new series; 2019, 20, 3; 31-56
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The evaluation of production line measurement process quality
Ocena jakości procesu pomiarowego na linii produkcyjnej
Autorzy:
Zalewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/256409.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
measurement process
repeatability analysis
reproducibility analysis
Measurement System Analysis
MSA
production process
proces pomiarowy
analiza powtarzalności
analiza odtwarzalności
proces produkcyjny
Opis:
In production control processes, many decisions are made based on measurements conducted during the production itself. Therefore, the product quality, the equipment operating conditions, and the course of production process are all influenced by the quality of measurement system in use. Repeatability and Reproducibility Analysis (R&R), which is one of the methods of Measurement System Analysis (MSA), can be used in order to evaluate the measurement system’s precision. This article presents an evaluation of a measurement system, transferred directly from a Control Department to a Production Line in one of the enterprises in Podlaskie region. For the calculation, the author used the results of a measurement experiment in the surveyed enterprise carried out in the STATISTICA software. There was also an analysis conducted of cause-and-effect in relation to measurement processes of bad quality.
W procesach sterowania produkcją wiele decyzji podejmowanych jest na podstawie przeprowadzonych w jej trakcie pomiarów. Jakość stosowanego procesu pomiarowego ma więc wpływ na jakość wyrobów, warunki eksploatacji maszyn, przebieg procesu produkcji. Do oceny poprawności systemu pomiarowego można wykorzystać analizę powtarzalności i odtwarzalności (R&R), która jest jedną z metod analizy MSA (Measurement System Analysis). W artykule przedstawiono ocenę jakości systemu pomiarowego, który został przeniesiony z działu kontroli jakości bezpośrednio na linię produkcyjną w jednym z przedsiębiorstw w województwie podlaskim. Do obliczeń wykorzystano wyniki eksperymentu pomiarowego w badanym zakładzie opracowane przy użyciu aplikacji STATISTICA. Przeprowadzono również analizę przyczynowo-skutkową złej jakości procesów pomiarowych.
Źródło:
Problemy Eksploatacji; 2014, 3; 151-163
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental demonstration of Measurement System Analysis
Dekompozycja oraz analiza składników błędu systemu pomiarowego z zastosowaniem metodologii Six Sigma
Autorzy:
Król, A.
Czaja, W.
Kost, G.
Czop, P.
Wszołek, G.
Jakubowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/277137.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
analiza systemu pomiarowego
MSA
analiza ANOVA
walidacja
tester serwohydrauliczny
measurement system analysis
variance analysis ANOVA
validation
servo-hydraulic tester
Opis:
This work presents the application of Measurement System Analysis (MSA) and the advantages of the Six Sigma approach in the validation of a servo-hydraulic tester. The diagnosis of repeatability and reproducibility by using repeatability (R) and reproducibility (R) gage analysis (so called Gage R&R Type II tool) which shows the correct operation of the measuring system including uncertainty of staff and measuring instrumentation. The Gage R&R Type II tool is based on the analysis of variance, called ANOVA. The structural approach to the subject has also provided knowledge of the error of the measurement system.
W artykule zaprezentowano zastosowanie analizy systemu pomiarowego (MSA) oraz zalety Six Sigma w podejściu walidacji testera serwohydraulicznego. Ustalenie stopnia powtarzalności i odtwarzalności przez użycie analizy powtarzalności (repeatability - R) i odtwarzalności (reproducibility - R) zwanej Gage R&R Type II, która pokazuje prawidłową pracę systemu pomiarowego, w tym niepewność pracowników oraz narzędzi pomiarowych. Narzędzie Gage R&R Type II bazuje na analizie wariancji zwanej ANOVA. Podstawowym podejściem do wiedzy na temat badanego obiektu jest poznanie błędu samego systemu pomiarowego.
Źródło:
Pomiary Automatyka Robotyka; 2013, 17, 1; 92-96
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of Reliability of Measurement Data and Adequacy of the Measurement Systems in Improving Quality of Casting Products
Autorzy:
Fedoryszyn, A.
Brzeziński, M.
Powiązania:
https://bibliotekanauki.pl/articles/380770.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
quality control
cast quality
measurement system analysis
repeatability analysis
reproducibility analysis
kontrola jakości
jakość odlewu
analiza systemu pomiarowego
analiza powtarzalności
analiza odtwarzalności
Opis:
The study summarises the analysis of reliability assessment of measurements of a selected critical property of a high-precision casting product. Measurement data must be sufficiently reliable to be used in decision-making relating to quality control and the selection of the casting manufacturing technology. The applied procedure is illustrated by study of the variability range of readouts depending on the measurement conditions, obtained by the computer methods. The applied R&R (Repeatability and Reproducibility) procedure is major component of the widely employed Measurement System Analysis (MSA).
Źródło:
Archives of Foundry Engineering; 2015, 15, 3 spec.; 124-126
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement system analysis of attribute or continuous data, as a one of the first steps in Lean Six Sigma projects
Analiza systemu pomiarowego danych atrybutowych i ciągłych, jako jeden z pierwszych kroków projektów Lean Six Sigma
Autorzy:
Wojtaszak, M.
Biały, W.
Powiązania:
https://bibliotekanauki.pl/articles/113317.pdf
Data publikacji:
2013
Wydawca:
STE GROUP
Tematy:
measurement system analysis
lean management
Six Sigma
Gage R&R
measurement error
analiza systemu pomiarowego
zarządzanie szczupłe
pomiar powtarzalności i odtwarzalności
błąd pomiarowy
Opis:
Measurement System Analysis is a part of “Measure” phase, which is a structured project management approach. This approach consist of the following steps: Define, Measure, Analyze, Improve, Control – “DMAIC” and is a path to resolve production problems based on Lean Six Sigma methodology. This method has been presented by using of computer aided statistical software – Minitab – which is a most common statistical software, used by Green or Black Belts. As a Master Black Belt I faced to the problem of lack an appropriate explanation of using it by the Belts – which contributed by implementation of a proper training program. Measurement system analysis in this program, is divided by Attribute Agreement Analysis, which is analysis of attribute data, and Gage R&R – analysis for continuous data. Therefore it is very important to understand differences between attribute and continuous date and their main metrics. Understanding data types, allowed to explain components of measurement errors. This base knowledge is a foundation of measurement system analysis and going further – base knowledge of each Green or Black Belt.
Analiza systemu pomiarowego jest częścią fasy "Pomiar", która jest ustrukturyzowanym podejściem do zarządzania projektami. To podejście składa się z następujących kroków: definiowanie, pomiar, analizowanie, poprawa, kontrola/sterowanie – "DMAIC" i jest drogą do rozwiązania problemów produkcyjnych opartych na metodologii Lean Six Sigma. Metoda ta została przedstawiona za pomocą komputerowego wspomagania statystycznych prac inżynierskich – Minitab – jest najczęściej spotykanym oprogramowanie statystyczne, wykorzystane przez Green lub Black Beltów. Jako Master Black Belt zetknąłem się z problemem braku odpowiedniego wyjaśnienia/zrozumienia I jego wykorzystania przez Beltów – co przyczyniło by wdrożenia odpowiedniego programu szkoleniowego. Analiza systemu pomiarowego w tym programie, jest podzielona na analizę systemu pomiarowego dla danych atrybutowych, oraz Gage R&R – analiza systemu pomiarowego dla danych ciągłych. W związku z tym bardzo ważne jest, aby zrozumieć różnice pomiędzy danymi atrybutowymi, a ciągłymi oraz ich główne współczynniki/metryki. Zrozumienie typu danych pozwoli na wyjaśnienie składników błędów pomiarowych. Ta podstawowa wiedza jest fundamentem analizy systemu pomiarowego, a idąc dalej – podstawową wiedzą każdego Green lub Black Belta.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2013, 1 (3); 144-162
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Oxygen Measurement System Capability in the Breathing Gas for Divers
Analiza zdolności systemu pomiarowego zawartości tlenu w czynniku oddechowym dla nurków
Autorzy:
Woźniak, Arkadiusz
Kryszak, Wacław
Powiązania:
https://bibliotekanauki.pl/articles/32695443.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Medycyny i Techniki Hiperbarycznej
Tematy:
measurement system analysis
diving breathing air quality
diving gases
measurement system
process variation
analiza systemu pomiarowego
jakość powietrza oddechowego
nurkowe czynniki oddechowe
systemy pomiarowe
zmienność procesu
Opis:
Maintaining a stable oxygen content during the hyperbaric exposure process with breathing air is important for the safety of divers and for diving equipment. This paper presents an analysis of the ability of a measurement system selected for testing to control the oxygen content in the breathing atmosphere of a hyperbaric facility. The measurement system was qualified according to the requirements of the supervised process. The evaluation of the measuring system selected for tests, designed to control the oxygen content with the use of MSA procedures was carried out in KTPP AMW for the DKGN-120 complex.
Utrzymanie stabilnej zawartości tlenu w procesie ekspozycji hiperbarycznej z wykorzystaniem powietrza oddechowego ma istotne znaczenie dla bezpieczeństwa nurków i techniki nurkowej. W artykule przedstawiono analizę zdolności wytypowanego do badań systemu pomiarowego do kontroli zawartości tlenu w atmosferze oddechowej obiektu hiperbarycznego. Kwalifikację systemu pomiarowego przeprowadzono pod kątem wymagań nadzorowanego procesu. Ocenę wytypowanego do badań systemu pomiarowego przeznaczonego do kontroli zawartości tlenu z wykorzystaniem procedur MSA przeprowadzono w KTPP AMW dla kompleksu DKGN-120.
Źródło:
Polish Hyperbaric Research; 2021, 1(74); 7-22
1734-7009
2084-0535
Pojawia się w:
Polish Hyperbaric Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Validating a destructive measurement system using Gauge R&R — a case study
Autorzy:
Sharma, Mithun
Sahni, Sanjeev P.
Sharma, Shilpi
Powiązania:
https://bibliotekanauki.pl/articles/125507.pdf
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
Six Sigma
destructive testing
measurement system analysis
Gauge R&R
crossed Gauge R&R
test niszczący
analiza systemu pomiarowego
Gage R&R
Opis:
The research study aims to evaluate the precision of the measurement system using Gauge R&R. An experimental research design adopting a positivist empirical approach with deductive strategy was followed to assess the effectiveness of Crossed Gauge R&R technique for validating a measurement system using destructive testing. Crossed Gauge R&R technique in Minitab was found to be highly effective in quantifying different components of measurement variation relative to process variation. Clue generation from the Crossed Gauge R&R study combined with manufacturing and measurement process know-how helped in identifying and eliminating the root causes for measurement variation. Overall Crossed Gauge R&R proved successful in validating the burst strength test equipment. However, it should be noted that manufacturing and test equipment played an equally important part in developing and executing the gauge R&R study and accurately analysing the results. So, Crossed Gauge R&R should be used as an aid rather than the solution for measurement system validation.
Źródło:
Engineering Management in Production and Services; 2019, 11, 4; 34-42
2543-6597
2543-912X
Pojawia się w:
Engineering Management in Production and Services
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowe wskaźniki efektywności procesu wdrażania produkcji nowatorskich wyrobów, realizowanego na podstawie wytycznych branży motoryzacyjnej
New efficiency indicators of innovative products implementation process realized on the basis of automotive requirements
Autorzy:
Gawlik, J.
Rewilak, J.
Tokaj, T.
Powiązania:
https://bibliotekanauki.pl/articles/340061.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Zarządzania Produkcją
Tematy:
APQP (Advanced Product Quality Planning)
PPAP (Production Part Approval Process)
flowchart
FMEA
control plan
MSA (Measurement System Analysis)
SPC (Statistical Process Control)
Taguchi's loss function
Opis:
One of the requirements of the process approach is to identify the methods and evaluation criteria for process measurement. Efficiency described as the ability to achieve planned results with respect to consumed resources may be a measure used for evaluation of processes. The article presents a few concepts of efficiency indicators that can be used in assessing the activities carried out within the framework of the implementation of new projects, according to standards of automotive industry. These standards are: APQP (Advanced Product Quality Planning) and its integral part, used in the final stage of validation of the product and process, known as PPAP (Production Part Approval Process). The paper proposes three concepts of indicators assessing the efficiency of the above-described process and one concept of calculating the efficiency indicator based on the Taguchis loss function.
Źródło:
Zarządzanie Przedsiębiorstwem; 2013, 16, 1; 2-10
1643-4773
Pojawia się w:
Zarządzanie Przedsiębiorstwem
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of measurement system quality on the evaluation of process capability indices
Wpływ jakości systemu pomiarowego na ocenę współczynników zdolności procesu
Autorzy:
Czarski, A.
Matusiewicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/264171.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
zarządzanie jakością
metody statystyczne
statystyczne sterowanie procesem
SPC
analiza systemu pomiarowego
MSA
metoda R&R
zdolność procesu
quality management
statistical methods
statistical process control
R&R method
measurement system analysis
capability analysis
Opis:
Among statistical instruments of quality Statistical Process Control (SPC) and Measurement Systems Analysis (MSA) take particular place. The proper quality of measurement data - verification and assurance of this quality are the task of MSA - guarantees an opportunity to carry out a solid SPC analysis supplying information about a process behavior. One of the principal tasks of SPC is estimation of capability of a process i.e. the assessment of process potential as for variability regarding expectations defined by specification limits. Data for analysis of a process capability are the results of measurements made by means of a determined measurement system. The variability of this measurement system must influence the results of capability assessment, however the measurement system adequate to control the process should guarantee that the impact is little enough to be omitted. The subject of the work is the analysis of influence of measurement system variability on evaluation of process capability indices. The mutual relations between process variability and measurement system variability present analytical relationships and experimental research given in the work. The aim of the tests was an assessment of a capability of the process of steel drop forgings' heat treatment relating to a hardness. The methodology demonstrated in the work is valid quality standards compatible (ISO 9000, ISO/TS 16949 etc.).
Wśród statystycznych narzędzi jakości szczególne miejsce zajmują: statystyczne sterowanie procesem (SPC) oraz analiza systemów pomiarowych (MSA). Odpowiednia jakość danych pomiarowych - weryfikacja i zapewnienie tej jakości to zadanie MSA - gwarantuje możliwość przeprowadzenia rzetelnej analizy SPC dostarczającej istotnych informacji o zachowaniu się procesu. Jednym z podstawowych zadań SPC jest ocena zdolności jakościowej procesu, tj. ocena możliwości procesu ze względu na zmienność w odniesieniu do oczekiwań definiowanych granicami specyfikacji. Dane do analizy zdolności procesu są wynikiem pomiarów wykonanych za pomocą określonego systemu pomiarowego. Zmienność tego systemu pomiarowego musi wpływać na wyniki oceny zdolności, niemniej odpowiedni do nadzorowania procesu system pomiarowy powinien gwarantować, aby wpływ ten był na tyle mały, że pomijalny. Przedmiotem artykułu jest analiza wpływu zmienności systemu pomiarowego na ocenę współczynników zdolności procesu. Wzajemne relacje pomiędzy zmiennością procesu oraz zmiennością systemu pomiarowego przestawiają podane w pracy związki analityczne oraz badania eksperymentalne. Celem badań była ocena zdolności procesu obróbki cieplnej odkuwek stalowych do uzyskiwanej twardości. Metodyka zaprezentowana w pracy jest zgodna z obowiązującymi standardami jakości (ISO 9000, ISO/TS 16949 itp.).
Źródło:
Metallurgy and Foundry Engineering; 2012, 38, 1; 25-32
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O problemach w kwalifikacji zdolności systemów pomiarowych w badaniach chropowatości powierzchni, analiza na przykładzie precyzyjnych części w branży motoryzacyjnej
The problems in in the qualification of measuring systems abilities in the investigation performance, the analysis on the example of precision workpieces in the automotive industry
Autorzy:
Garbaciak, M.
Bachtiak-Radka, E.
Dudzińska, S.
Grochała, D.
Powiązania:
https://bibliotekanauki.pl/articles/312919.pdf
Data publikacji:
2018
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
analiza zdolności systemów pomiarowych
system pomiarowy
błędy pomiarowe
chropowatość powierzchni
branża motoryzacyjna
analysis of measurement system capabilities
measurement system
measurement errors
surface roughness
automotive industry
Opis:
W artykule omówione zostały problemy w kwalifikacji zdolności systemów pomiarowych w badaniach chropowatości powierzchni precyzyjnych części w branży motoryzacyjnej. Badania przeprowadzono zgodnie z planem pomiarów. Następnie w oparciu o zebrane wyniki dla wybranych parametrów SPG wykonano analizę i ocenę wskaźników zdolności zgodnie z procedurą 2 statystycznej kwalifikacji systemów pomiarowych (zgodne z normą MSA 2010 edycja 4, ARM, tolerancja). Analizie poddano dwa wyroby fragment cylindra i labiryntowych zaworów automatycznych skrzyń biegów. Analiza dała szereg informacji dotyczących błędów z punktu widzenia powtarzalności i odtwarzalności na zdolność systemu pomiarowego – analizy zostały wykonane na potrzeby płynące z przemysłu.
The manuscript introduce the problems in the qualification of measuring systems abilities in the investigation in the surface roughness of precision workpieces in the automotive industry. The research were carried out in accordance with the measurement plan. Next, based on the collected results for selected SPG parameters, the analysis and assessment of the capacity indicators were carried out in accordance with the procedure 2 of statistical qualification of measurement systems (in accordance with the MSA 2010 standard edition 4, ARM, tolerance). Two products were analyzed of the cylinder fragment and labyrinth valves of automatic gearboxes. The analysis gave a series of information on errors from the point of view of reproducibility and recurrence on the ability of the measurement system - the analyzes were carried out for the needs of the automotive industry.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2018, 19, 9; 147-151
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System zbierania i archiwizowania danych pomiarowych ze stanowisk produkcyjnych
Collection and archiving system of measurement data from production position
Autorzy:
Tarczyński, W.
Kopka, R.
Powiązania:
https://bibliotekanauki.pl/articles/274683.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
proces pomiarowy
system komputerowy
analiza wyników pomiarowych
measurement process
computer system
measurement data analysis
Opis:
W artykule opisano układ przeznaczony do zbierania danych pomiarowych na stanowiskach produkcyjnych zakładu produkującego wyroby metalowe metodą obróbki skrawaniem. System składa się ze stanowisk pomiarowych rozmieszczonych przy każdym stanowisku produkcyjnym, sieci teleinformatycznej, przełącznika sieciowego i komputerów centralnych. Stanowisko składa się ze sterownika mikroprocesorowego, panelu operatorskiego oraz przełącznika przyrządów, do którego wpięte są przyrządy pomiarowe. Pomiary wykonuje pracownik przyrządami z odczytem cyfrowym. Wyniki zapamiętywane są w pamięci sterownika, a po zakończeniu pomiarów przesyłane są do komputera centralnego w celu ich analizy i archiwizacji.
In article the system for collection of measurement data on production position of metal detail are described. The system consist of measurement positions which are arrange at the each production position, communication network, network switch and two central computers. The measurement position consist of microprocessor controller, control panel and switch instruments in which are stick measurement instruments. The measure process is carry out by worker by means of the instrument with the digital readout. The measure results are storing in memory of controller and after the finish of measurement process are transferred do central computer, where are analyzed and archived.
Źródło:
Pomiary Automatyka Robotyka; 2011, 15, 10; 77-83
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stanowisko do pomiaru szerokości krawędzi narty
Ski edge width measurement stand
Autorzy:
Golijanek-Jędrzejczyk, A.
Michalski, K.
Powiązania:
https://bibliotekanauki.pl/articles/268254.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
system pomiarowy
systemy wizyjne
analiza obrazu
measurement system
vision system
image analysis
Opis:
Regeneracja sprzętu narciarskiego zapewnia nie tylko niezapomniane doznania na stoku, ale przede wszystkim bezpieczeństwo. Serwisowanie nart, poza smarowaniem, to w głównej mierze ostrzenie krawędzi na specjalistycznych szlifierkach. Poprawne wykonanie tej usługi polega na naostrzeniu krawędzi przy jednoczesnej minimalizacji ilości zebranego z narty materiału, co nie jest prostym zadaniem, gdyż typowa szerokość krawędzi narty jest rzędu 1,5 mm. W referacie zaprezentowane zostało specjalistyczne stanowisko zaprojektowane dla potrzeb serwisu nart (zarówno od strony sprzętowej jak i programowej). Zbudowany system pomiarowy umożliwia jednoczesny pomiar szerokości krawędzi narty w zakresie pomiarowym od 0,2 mm do 2 mm, zapewniając analizę szerokości krawędzi narty na ok. 80% jej długości.
Regeneration of ski equipment provides not only an unforgettable experience on the slopes, but most of all safety. Servicing skis, besides lubrication, is mainly sharpening edges on special grinding machines. Proper execution of this service is sharpening of the edge while minimizing the amount of material collected from the ski, which is not a trivial task, since the typical width of the ski edge is of the order of 1.5 mm. The paper will present a special stand (both hardware and software) designed for service of skis. The built measurement system can measure the width of the ski edge in the measuring range from 0.1 mm to 2 mm, providing an analysis of the width of the ski edge at approx. 80% of its length. The paper presents the results of these tests confirm the correctness of operation and reasoning as planned.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2016, 51; 55-58
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and evaluation of a needle tip measurement system based on binocular vision
Autorzy:
Lin, Yuyang
Shi, Yunlai
Zhang, Jun
Wang, Fugang
Sun, Haichao
Powiązania:
https://bibliotekanauki.pl/articles/220501.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
needle tip measurement
binocular vision system
measurement capability analysis
non-contact optical positioning
Opis:
The precise location of the needle tip is critical in robot-assisted needle-based percutaneous interventions. An automatic needle tip measuring system based on binocular vision technology with the advantages of non-contact, excellent accuracy and high stability is designed and evaluated. First the measurement requirements of the prostate intervention robot are introduced. A laser interferometer is used as the reference for measuring the position of the needle tip whose relative position variation is described as the needle tip distance in the time domain. The parameters of the binocular cameras are obtained by Zhang’s calibration method. Then a robust needle tip extraction algorithm is specially designed to detect the pixel coordinates of the needle tip without installing the marked points. Once the binocular cameras have completed the stereo matching, the 3D coordinates of the needle tip are estimated. The measurement capability analysis (MCA) is used to evaluate the performance of the proposed system. The accuracy of the system can be controlled within 0.3621 mm. The agreement analysis is conducted by the Bland-Altman analysis, and the Pearson correlation coefficient is 0.999847. The P/T ratio value is 16.42% in the repeatability analysis. The results indicate that the accuracy and stability of the binocular vision needle tip measuring system are adequate to meet the requirement for the needle tip measurement in percutaneous interventions.
Źródło:
Metrology and Measurement Systems; 2020, 27, 3; 495-512
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zarządzanie ryzykiem jako narzędzie doskonalenia systemu nadzoru nad przyrządami pomiarowymi na rzecz ochrony interesu publicznego
The risk management as the tool to improve the system of measuring instrument supervision for the public interest protection
Autorzy:
Wiśniewska, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/952654.pdf
Data publikacji:
2018
Wydawca:
Główny Urząd Miar
Tematy:
przyrządy pomiarowe
system nadzoru
analiza ryzyka
measurement instruments
supervision system
risk analysis
Opis:
Pomiary stanowią jedno z podstawowych źródeł informacji o stanie i właściwościach wyrobów. Na ich podstawie podejmowane są decyzje o akceptacji albo odrzuceniu wyrobu. Jednym z elementów procesu pomiaru jest przyrząd pomiarowy, a jego odpowiednie właściwości metrologiczne przyczyniają się do poprawności przebiegu i wykonania pomiaru. Celem artykułu jest zaprezentowanie metodyki analizy zagrożeń i ryzyka dla społeczeństwa wynikających ze stosowania niezgodnych z wymaganiami przyrządów pomiarowych. Organy państwa muszą ustalać priorytety wśród działań podejmowanych na rzecz minimalizacji ryzyk, dlatego też konieczna jest ocena wielkości tych ryzyk. Na rzecz analizy i oceny ryzyka uwzględniono, obok wyników z krajowego nadzoru organów państwa, m.in. takie elementy jak: poziom wiedzy i świadomości uczestników łańcucha dostaw (producentów, upoważnionych przedstawicieli producentów, importerów, dystrybutorów, użytkowników), regulacje krajowe i unijne, zainteresowanie i wrażliwość społeczną na wszelkie nieprawidłowości mające miejsce na rynku przyrządów pomiarowych oraz informacje z innych krajów europejskich. W artykule zaprezentowano też model doskonalenia systemu nadzoru nad przyrządami pomiarowymi skoordynowany z procesem zarządzania ryzykiem tak, aby oceny podejmowanych działań w ramach nadzoru dokonywać w kontekście ponoszonych kosztów oraz istotności zagrożeń dla interesu publicznego.
The measurements are one of the basic source of information about the condition and characteristics of a product. On their basis products are accepted or rejected. A measuring instrument is one of the elements of measuring process, and its proper quality characteristics influence the measuring process and its outcome. The goal of this article is to present a method of consumers threats and risk analysis as a result non-compliant measuring devices use. Public authorities have to describe priorities to minimize this risk. Therefore they need to evaluate a range of the risk. A procedure of risk assessment regarding the threats of the measuring instruments is presented in this paper. Results of the state organs control, a level of knowledge, awareness of producers and authorized representatives of producers, importers, distributors, users, national and EU regulations, social acceptance of the risk associated with the product concerned, information from other EU members are taken for the analysis and risk assessment. A model which can improve supervision of measuring devices is presented in this paper as well. The model is connected with the risk management process to evaluate activities in the context of expenses and threats for society.
Źródło:
Metrologia i Probiernictwo : biuletyn Głównego Urzędu Miar; 2018, 1 (20); 29-37
2300-8806
Pojawia się w:
Metrologia i Probiernictwo : biuletyn Głównego Urzędu Miar
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezprzewodowy system pomiarowo-diagnostyczny
Wireless measurement system
Autorzy:
Bojko, T.
Chmaj, G.
Powiązania:
https://bibliotekanauki.pl/articles/327288.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
system pomiarowy
analiza modalna
diagnostyka
measurement systems
modal analysis
diagnostics
Opis:
Technologie wykorzystujące bezprzewodową transmisję danych są obecnie jedną z najszybciej rozwijających się gałęzi elektroniki. Dzięki zastosowaniu nowoczesnych podzespołów elektronicznych możliwa jest budowa inteligentnych układów pomiarowych znajdujących zastosowanie w pomiarach i diagnostyce urządzeń i budowli. W artykule opisano aplikację bezprzewodowych modułów pomiarowych z systemem TinyOS opracowaną do pomiarów związanych z diagnostyką strukturalna. Przedstawiono opracowane przez autorów artykułu oprogramowanie oraz uzyskane rezultaty pomiarów. Opisano również nowo projektowany system z synchronizacją pomiarów za pomocą odbiornika GPS.
Wireless data transfer technologies are one of the fastest developed applications in electronics. Recent technological advances have enabled the development of intelligent measurement sensor devices which can be applied in measurement and diagnostics of machines and civil constructions. In the paper the wireless measurement system based on TinyOS operating system was presented. This system was developed for structural health monitoring applications, The developed PC software and results of laboratory experiments was presented. In the paper the description of new developed system with GPS synchronisation was described.
Źródło:
Diagnostyka; 2006, 3(39); 291-296
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies