Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "MAR-M509 alloy" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Stress rupture test of MAR-M509 alloy with structure refined by rapid resolidification
Autorzy:
Mróz, M.
Orłowicz, W.
Tupaj, M.
Trytek, A.
Powiązania:
https://bibliotekanauki.pl/articles/380450.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stop MAR M509
mikrostruktura
MAR-M509 alloy
rapid resolidification
microstructure
stress rupture test
Opis:
This study presents results of stress rupture test of MAR-M-509 cobalt alloy samples, as-cast and after surface refining with a concentrated stream of heat. Tests were conducted on samples of MAR-M-509 alloy castings, obtained using the lost-wax method. Casting structure refining was performed with the GTAW method in argon atmosphere, using the current I = 200 A and electrical arc scanning velocity vs = 100, 150, 200 and 250 mm/min. The effect of rapid resolidification of the MAR-M-509 alloy on the microstructure was examined and significant improvement in stress rupture test was observed.
Źródło:
Archives of Foundry Engineering; 2012, 12, 4; 117-120
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometry of remeltings and efficiency of the surface remelting process applied to cobalt alloy castings
Autorzy:
Mróz, M.
Orłowicz, W.
Tupaj, M.
Powiązania:
https://bibliotekanauki.pl/articles/381741.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
MAR-M509 alloy
surface remelting
remelting geometry
thermal efficiency
melting efficiency
stop MAR M509
przetapianie powierzchniowe
geometria przetopienia
sprawność cieplna
efektywność topienia
Opis:
The paper summarises results of measurements of remelting area geometry, thermal efficiency and melting efficiency characterising the surface remelting process applied to castings of MAR-M-509 cobalt alloy. The remelting process was carried out with the use of GTAW (Gas Tungsten Arc Welding) method in protective atmosphere of helium, at the electric current intensity in the range from 100 A to 300 A, and the electric arc scanning velocity vs in the range from 200 mm/min to 800 mm/min. The effect of current intensity and electric arc scanning velocity on geometrical parameters of remeltings, thermal efficiency, and melting efficiency characterising the remelting process has been determined.
Źródło:
Archives of Foundry Engineering; 2013, 13, 2; 95-98
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stress-rupture Tests of MAR-M-509 Cobalt Alloy Improved by Rapid Solidification
Autorzy:
Mróz, M.
Orłowicz, W.
Tupaj, M.
Powiązania:
https://bibliotekanauki.pl/articles/380367.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
MAR-M509 cobalt alloy
rapid solidification
stress rupture test
stop kobaltu MAR-M509
krystalizacja szybka
Opis:
In the paper, results of stress-rupture test applied to MAR-M-509 cobalt alloy specimens, in as-cast condition and with microstructure shaped under rapid solidification conditions are presented. The material for the study were castings of MAR-M509 alloy obtained by means of the investment casting method. The rapid solidification conditions were obtained by means of remelting process carried out with the use of GTAW method. The effect of rapid solidification following the remelting process is a refinement of microstructure in castings of MAR-M509 alloy and significant extension of the time to rupture in stress-rupture test.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 117-120
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties of Two Layers Thermal Barrier Coating Deposited on a Plate Made of Cobalt Alloy MAR-M509
Autorzy:
Opiekun, Z. A.
Powiązania:
https://bibliotekanauki.pl/articles/381388.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cobalt alloy MAR-M509
thermal barrier coating
microstructure
microhardness
Nano Scratch-Tester
stop kobaltu MAR-M509
bariera cieplna
mikrostruktura
mikrotwardość
Opis:
The manuscript presents a microstructure and mechanical properties of two layers of thermal barrier coating (TBC) deposited on a plate made of cobalt alloy MAR-M509. Based on measurements of microhardness made with Berkovitz’s indenter using Nano Scratch-Tester CSM Instruments, it was stated that elastic (Ee) to total energy (Ec) parameters (MIT=Ee/Ec), γ phase, matrix of alloy MAR-M509 (MITγ), metallic interlayer (45%Ni – 22% Co – 17% Cr – 16% Al – 0,3% Y),(MITM) and ceramic layer (MITZrO2) there are proportion 0,29:0,22:0,50.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 131-134
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cohesion and Adhesion Interlayer of the Thermal Barrier Coatings Made of Cobalt Alloy MAR-M509
Autorzy:
Opiekun, Z. A.
Trytek, A.
Powiązania:
https://bibliotekanauki.pl/articles/380444.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cobalt alloy MAR-M509
thermal barrier coating
interlayer cohesion
adhesion
scratch test
stop kobaltu
powłoka termiczna
przyczepność
Opis:
The manuscript presents microstructure, geometrical product specification and results of scratch tests performed on the interlayer of thermal barrier coating (TBC) with Rockwell’s intender. The TBC was provided by depositing two layers; metallic interlayer and external ceramic layer onto a plate coating made of cobalt alloy MAR-M509 in plasma spraying process. The surface of the casting was sandblasted with Al2O3 powder in an air stream before the TBC was introduced. Scratches were made along the cross-section from a mould material (MAR-M509) through metallic interlayer and external ceramic layer in the TBC. Friction force, friction factor and acoustic emission were recorded during the test. It has been proved that metallic interlayer in the TBC of ca. 200 μm thickness forms tough coating without pores with good cohesion values and very good adhesion values to the mould.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1 spec.; 159-164
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies