Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Fourier transform" wg kryterium: Temat


Tytuł:
3D Synthetic Aperture Imaging Method in Spectrum Domain for Low-Cost Portable Ultrasound Systems
Autorzy:
Tasinkiewicz, Jurij
Powiązania:
https://bibliotekanauki.pl/articles/31339771.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
ultrasound imaging
matrix transducer
delay-and-sum
Fourier transform
synthetic aperture
Opis:
Portable, hand-held ultrasound devices capable of 3D imaging in real time are the next generation of the medical imaging apparatus adapted not only for professional medical stuff but for a wide group of less advanced users. Limited power supply capacity and the relatively small number of channels used for the ultrasound data acquisition are the most important limitations that should be taken into account when designing such devices and when developing the corresponding image reconstruction algorithms. The aim of this study was to develop a new 3D ultrasound imaging method which would take into account the above-mentioned features of the new generation of ultrasonic devices – low-cost portable general access scanners. It was based on the synthetic transmit aperture (STA) method combined with the Fourier spectrum domain (SD) acoustic data processing. The STA using a limited number of elements in transmit and receive modes for ultrasound data acquisition allowed both aforementioned constraints to be obeyed simultaneously. Moreover, the computational speed of the fast Fourier transform (FFT) algorithm utilized for the ultrasound image synthesis in the spectrum domain makes the proposed method to be more competitive compared to the conventional time domain (TD) STA method based on the delay-and-sum (DAS) technique, especially in the case of 3D imaging in real time mode. Performance of the proposed method was verified using numerical 3D acoustic data simulated in the Field II program for MATLAB and using experimental data from the custom design 3D scattering phantom collected by means of the Verasonics Vantage 256™ research ultrasound system equipped with the dedicated 1024-element 2D matrix transducer. The method proposed in this paper was about 80 times faster than its counterpart based on the time domain synthetic transmit aperture (TD-STA) approach in the numerical example of a single 3D ultrasound image synthesized from 4 partial images each containing 64 × 64 × 512 pixels. It was also shown that the acceleration of the image reconstruction was achieved at the cost of a slight deterioration in the image quality assessed by the contrast and contrast-to-noise ratio (CNR).
Źródło:
Archives of Acoustics; 2023, 48, 4; 559-572
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnosis of ITSC fault in the electrical vehicle powertrain system through signal processing analysis
Autorzy:
Ouamara, Dehbia
Boukhnifer, Moussa
Chaibet, Ahmed
Maidi, Ahmed
Powiązania:
https://bibliotekanauki.pl/articles/2174472.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
induction motor
electrical vehicle
fault diagnosis
inter-turn short circuit
extended Kalman filter
spectral analysis
fast Fourier transform
short-time Fourier transform
silnik indukcyjny
pojazd elektryczny
diagnostyka uszkodzeń
zwarcie międzyzwojowe
rozszerzony filtr Kalmana
analiza spektralna
szybka transformata Fouriera
krótkoczasowa transformata Fouriera
Opis:
The three-phase induction motor is well suited for a wide range of mobile drives, specifically for electric vehicle powertrain. During the entire life cycle of the electric motor, some types of failures can occur, with stator winding failure being the most common. The impact of this failure must be considered from the incipient as it can affect the performance of the motor, especially for electrically powered vehicle application. In this paper, the intern turn short circuit of the stator winding was studied using Fast Fourier transform (FFT) and Shor-Time Fourier transform (STFT) approaches. The residuals current between the estimated currents provided by the extended Kalman filter (EKF) and the actual ones are used for fault diagnosis and identification. Through FFT, the residual spectrum is sensitive to faults and gives the extraction of inter-turn short circuit (ITSC) related frequencies in the phase winding. In addition, the FFT is used to obtain information about when and where the ITSC appears in the phase winding. Indeed, the results allow to know the faulty phase, to estimate the fault rate and the fault occurrence frequency as well as their appearance time.
Źródło:
Diagnostyka; 2023, 24, 1; art. no. 2023113
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of sway and roll excitations on sloshing loads in a KC-1 membrane LNG tank
Autorzy:
An, Se-yeol
Jeong, Hyeon-won
Kim, Ohyoung
Shim, W. Jaewoo
Powiązania:
https://bibliotekanauki.pl/articles/34600997.pdf
Data publikacji:
2023
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
KC-1 membrane LNG tank
sloshing
sway
roll
coupled sway-roll
Fast Fourier transform (FFT)
Opis:
This study investigates the effects of sway and roll excitations on sloshing liquid loads in a tank, using Ansys Fluent software. The model considered in the study is a 1:50 scaled membrane-type tank, based on a KC-1 membrane LNG tank designed by Korea Gas Corporation (KOGAS). The volume of fluid (VOF) method is used to track the free surface inside the tank, and the standard k-ε model is applied to express the turbulent flow of the liquid. To explore the motion of the tank under excitation, a user-defined function (UDF) and a dynamic mesh technique are employed to control the external forces exerted on the tank through its motion. The results, in the form of time series data on the sloshing pressures in the tank under pure sway, roll, and coupled sway-roll, are analysed, with specific ranges for the excitation amplitudes and frequencies. We show that variations in excitation frequency and amplitude significantly influence the sloshing loads. Sloshing loads are found to intensify when the excitation frequency matches the tank’s primary natural frequency, 1.0 ω'1. Furthermore, with coupled sway-roll excitations, the sloshing loads are weakened when the sway and roll are in-phase and are intensified when these are out-of-phase. Fast Fourier transform analysis provides insights into the frequency domain, showing that the dominant frequency is 0.88 Hz and it is approximately equal to the tank’s primary natural frequency, 1.0 ω'1.
Źródło:
Polish Maritime Research; 2023, 4; 43-53
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High-security image encryption by multiplexing phase encoding in domains of dual optical transforms
Autorzy:
Li, Zhihui
Gao, Bin
Pan, Xiaoou
Li, Linlin
Wang, Chenxuan
Zuo, Weizhuo
Ji, Yu
Liu, Shutian
Liu, Zhengjun
Powiązania:
https://bibliotekanauki.pl/articles/27310099.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
extended fractional Fourier transform
geometric operations
random phase encoding
Opis:
A novel optical image encryption is proposed based on multiplexing of the random phase encoding with shift and rotation operations in domains of two transforms, extended fractional Fourier transform (eFrFT) and Fresnel transform. The original image is subjected to eFrFT with the action of the random phase mask. The mask is shifted and rotated to enhance the security of this encryption method. The image obtained from eFrFT is entered into Fresnel diffraction by the use of the phase mask to obtain the final encrypted image. We plan for the phase keys to be multiplexed in order to decrease the amount of keys that need to be stored in an application. Here, the displacement, rotation angle, and wavelength in this system can be used as additional keys to improve the security and reliability of the encryption system. Numerical experiments are conducted to verify the effectiveness and security of the method. The findings demonstrate that the keys are sufficiently sensitive for high security.
Źródło:
Optica Applicata; 2023, 53, 3; 447--466
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Infrasound Signal Classification Based on ICA and SVM
Autorzy:
Lu, Quanbo
Wang, Meng
Li, Mei
Powiązania:
https://bibliotekanauki.pl/articles/31339863.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
independent component analysis
fast Fourier transform
support vector machine
infrasound signal
Opis:
A diagnostic technique based on independent component analysis (ICA), fast Fourier transform (FFT), and support vector machine (SVM) is suggested for effectively extracting signal features in infrasound signal monitoring. Firstly, ICA is proposed to separate the source signals of mixed infrasound sources. Secondly, FFT is used to obtain the feature vectors of infrasound signals. Finally, SVM is used to classify the extracted feature vectors. The approach integrates the advantages of ICA in signal separation and FFT to extract the feature vectors. An experiment is conducted to verify the benefits of the proposed approach. The experiment results demonstrate that the classification accuracy is above 98.52% and the run time is only 2.1 seconds. Therefore, the proposed strategy is beneficial in enhancing geophysical monitoring performance.
Źródło:
Archives of Acoustics; 2023, 48, 3; 191-199
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mycoremediation of Heavy Metals Contaminated Soil by Using Indigenous Metallotolerant Fungi
Autorzy:
Akram, Muhammad Bilal
Khan, Ibrar
Ur Rehman, Mujaddad
Sarwar, Abid
Ullah, Najeeb
ur Rahman, Shafiq
Aziz, Tariq
Alharbi, Metab
Alshammari, Abdulrahman
Alasmari, Abdullah F.
Powiązania:
https://bibliotekanauki.pl/articles/27315654.pdf
Data publikacji:
2023
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Mycoremediation
Heavy Metals Contaminated Soil
Korangi Industrial Estate
FTIR
Fourier Transform Infrared Spectroscopy
SEM
Scanning Electron Microscope
Opis:
The present study was aimed to identify the indigenous fungal strains which could possibly be applied to the bioremediation of heavy metal-contaminated soil. The contaminated soil samples of Korangi Industrial Estate Karachi were found to have total concentration of Cu 1.044 mgL1 , and Pb 0.631 mgL–1. A total of eight indigenous strains of the fungus were isolated and screened for bioremediation capacity from heavy metals-contaminated soil. For the bioremediation of Lead (Pb) these same indigenous eight fungal strains were used for biological remediation. All the fungal isolated with enhanced bioremediation capability were through phenotypic and genotypical characterization. The topology of the phylograms established that the fungal isolates used in this study were allocated to: K1 (Penicillium notatum), K2 (Aspergillus parasiticus), K3 (Aspergillus fumigatus), K4 (Aspergillus flavus), K5 (Aspergillus terries), K6 (Fusarium solani), K7 (Penicillium chrysogenum), K8 (Aspergillus niger), K9 (Penicillium piceum) and K10 (Penicillium restrictum). Thus, K8 fungal isolate was found to be more efficient with maximum bioremediation capacity, for copper and lead removal efficiency, and selected for FTIR and SEM to find out the uptake of Cu and Pb which of the functional groups are involved, and further to detect the effects of bioleaching of both heavy metals on to the surface of K8 fungus biomass. The current study indicates that indigenous fungal isolates could be used with high potency to remediate or clean up the heavy metals-contaminated soil either by the technique of in situ or ex-situ bioremediation.
Źródło:
Polish Journal of Chemical Technology; 2023, 25, 3; 1--13
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxidative Aging Characterization of Pyro-Oil Modified Binders Using Fourier Transform Infrared Spectroscopy
Autorzy:
Bhagat, Nikita Taran
Hadole, Hemantkumar Prakash
Ranadive, Mahadeo Sambhaji
Powiązania:
https://bibliotekanauki.pl/articles/2201866.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pyro-oil
aging
asphalt binder
FTIR
Fourier Transform Infrared
carbonyls
sulfoxides
HDPE processing
plastic waste
pyrolysis of plastics
Opis:
The numerous uses for plastics in various industries have led to an increase in its manufacturing on a global scale over time. The accumulation of plastic waste is a direct result of the daily rise in plastic demand. One of the effective and trending ways of reducing the impact of plastic waste on the environment is to pyrolyze it and use the oil obtained from it as fuel for power generation, heating, extraction of chemicals, or as an asphalt binder modifier. In this study, an attempt was made for the modification of asphalt binder with the oil obtained from plastic waste pyrolysis known as pyro-oil, and to analyse aging properties of the modified binder. This paper deals with the modification of VG30 binder with pyro-oil obtained from High Density Polyethylene (HDPE) plastic waste and the analysing the effect of aging on the modified binders. Pyro-oil is yielded from the pyrolysis process of HDPE at about 750°C. The modified binders were prepared by adding 1%, 2%, and 3% pyro-oil by total weight of VG30. The effect of aging for the unmodified and modified binders was analyzed using fourier transform infrared (FTIR) spectroscopy. The binders were short term aged and the changes in their chemical functionalities before and after aging were analyzed. Results of the FTIR test were used to calculate functional group indices for evaluating the aging characteristics of the modified binders. It was observed that binder chemistry is influenced by aging.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 1; 140--149
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of time-frequency methods of acoustic signal processing in the diagnostics of tram drive components
Autorzy:
Mokrzan, Daniel
Nowakowski, Tomasz
Szymański, Grzegorz M.
Powiązania:
https://bibliotekanauki.pl/articles/27322536.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
tram drive diagnostics
time-frequency methods
short-time fourier transform
continuous wavelet transform
acoustic pressure
cepstrum
diagnostyka napędu tramwajowego
napęd tramwajowy
metody czasowo-częstotliwościowe
transformacja falkowa
ciśnienie akustyczne
Opis:
The paper presents the course of investigations and the analysis of the possibility of applying selected methods of time frequency processing of non-stationary acoustic signals in the assessment of the technical condition of tram drive components, as well as a new combined method proposed by the authors. An experiment was performed in the form of a pass-by test of the acoustic pressure generated by a Solaris Tramino S105p tram. A comparative analysis has been carried out for an efficient case and a case with damage to the traction gear of the third bogie in the form of broken gear teeth. The recorded signal was analyzed using short-time Fourier transform (STFT) and continuous wavelet transform (CWT). It was found that the gear failure causes an increase in the sound level generated by a given bogie for frequencies within the range of characteristic frequencies of the tested device. Due to the limitations associated with the fixed window resolution in STFT and the inability to directly translate scales to frequencies in CWT, it was found that these methods can be helpful in determining suspected damage, but are too imprecise and prone to errors when the parameters of both transforms are poorly chosen. A new CWT-Cepstrum method was proposed as a solution, using the wavelet transform as a pre-filter before cepstrum signal processing. With a sampling rate of 8192 Hz, a db6 mother wavelet, and a scale range of 1:200, the new method was found to infer the occurrence of damage in an interpretation-free manner. The results were validated on an independent pair of trams of the same model with identical damage and as a reference on a pair of undamaged trams demonstrating that the method can be successfully replicated for different vehicles.
Źródło:
Archives of Transport; 2023, 68, 4; 55--75
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The heat equation on time scales
Autorzy:
Cuchta, Tom
Ferreira, Rui A. C.
Powiązania:
https://bibliotekanauki.pl/articles/29519378.pdf
Data publikacji:
2023
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
heat equation
time scales
Fourier transform
Opis:
We present the use of a Fourier transform on time scales to solve a dynamic heat IVP. This is done by inverting a certain exponential function via contour integral. We include some specific examples and directions for further study.
Źródło:
Opuscula Mathematica; 2023, 43, 4; 475-491
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
VMD and CNN-Based Classification Model for Infrasound Signal
Autorzy:
Lu, Quanbo
Li, Mei
Powiązania:
https://bibliotekanauki.pl/articles/31339812.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
infrasound signal
variational mode decomposition
convolutional neural network
Fast Fourier Transform
Opis:
Infrasound signal classification is vital in geological hazard monitoring systems. The traditional classification approach extracts the features and classifies the infrasound events. However, due to the manual feature extraction, its classification performance is not satisfactory. To deal with this problem, this paper presents a classification model based on variational mode decomposition (VMD) and convolutional neural network (CNN). Firstly, the infrasound signal is processed by VMD to eliminate the noise. Then fast Fourier transform (FFT) is applied to convert the reconstructed signal into a frequency domain image. Finally, a CNN model is established to automatically extract the features and classify the infrasound signals. The experimental results show that the classification accuracy of the proposed classification model is higher than the other model by nearly 5%. Therefore, the proposed approach has excellent robustness under noisy environments and huge potential in geophysical monitoring.
Źródło:
Archives of Acoustics; 2023, 48, 3; 403-412
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza IR biogazu pochodzącego z przeróbki odpadów gorzelnianych
IR analysis of biogas from the processing of distillers waste
Autorzy:
Wieczorek, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/31348140.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
spektrometria w podczerwieni z transformacją Fouriera (FT-IR)
kuweta gazowa
IR
biogaz
Fourier transform infrared spectrometry (FT-IR)
gas cell
biogas
Opis:
Technika spektrometrii w podczerwieni (IR) stosowana jest do identyfikacji substancji organicznych, polimerowych i w niektórych przypadkach materiałów nieorganicznych. Zgodnie z tezą, że era paliw kopalnych powoli zbliża się do końca, zaistniała konieczność szukania i testowania alternatywnych źródeł energii. Gaz ziemny zawierający metan stanowi źródło energii wytwarzające duże ilości gazów cieplarnianych. Magazynowanie i wytwarzanie energii z paliw takich jak biogaz stanowi jedno z wielu innowacyjnych podejść podczas produkcji w zamkniętych, neutralnych pod względem CO2 obiegach (biogazownie). Technologie służące do wytwarzania biogazu i wykorzystujące biogaz kwalifikują się do otrzymania dofinansowania wspierającego rozwój OZE. Biogaz jest uważany za odnawialne źródło energii, obieg węgla w cyklu produkcji jego surowców i zużycia jest zamknięty i nie wiąże się z emisją netto dwutlenku węgla. Spektrometry IR pracujące zarówno w zakresie średniej, jak i bliskiej podczerwieni dają możliwości analizy chemicznej i materiałowej z dużą czułością i dokładnością, przez co mogą być szeroko stosowane w monitorowaniu środowiska lub do kontrolowania prowadzonych procesów technologicznych. W artykule opisano analizę próbek biogazu za pomocą spektrometrii w podczerwieni z transformacją Fouriera z zastosowaniem kuwety gazowej o regulowanej drodze optycznej. Badane próbki pochodzą z przerobu odpadów gorzelnianych. Przedstawiono analizę próbek gazów wzorcowych będących głównymi składnikami biogazu oraz dokonano porównania otrzymanych widm IR z widmami rzeczywistych próbek biogazu. Podjęto próbę określenia możliwości użycia tej techniki do wykrywania zanieczyszczeń, takich jak obecność gazowego amoniaku. Przeprowadzone badania potwierdziły możliwości analityczne badania głównych składników biogazu. Zawartość substancji będących zanieczyszczeniami biogazu może okazać się za niska do ich oznaczenia w przypadku ich śladowych ilości, wtedy spektrometria IR może okazać się niewystarczająca m.in. do oceny skuteczności prowadzonych procesów oczyszczania biogazu, dlatego należy ją stosować w połączeniu z analizą GC.
The infrared (IR) spectrometry technique is used to identify organic substances, polymers and, in some cases, inorganic materials. In line with the thesis that the era of fossil fuels is slowly coming to an end, there has been a need to search for and test alternative energy sources. Natural gas containing methane is an energy source that produces large amounts of greenhouse gases. Storing and producing energy from fuels such as biogas is one of the many innovative production approaches in closed, CO2-neutral circuits (biogas plants). Technologies for the production and use of biogas are eligible for funding supporting the development of renewable energy sources. Biogas is considered to be a renewable energy source, the carbon cycle in its raw material production and consumption is closed, with zero net carbon emissions. IR spectrometers operating both in the mid-infrared and near-infrared range provide the possibility of chemical and material analysis with high sensitivity and accuracy, therefore they can be widely used in environmental monitoring or to control technological processes. The article describes the analysis of biogas samples by Fourier transform infrared spectrometry with the use of a gas cuvette with adjustable optical path. The tested samples come from the processing of distiller's waste. The paper presents the analysis of standard gas samples, which are the main components of biogas, and compares the obtained IR spectra with the spectra for real biogas samples. An attempt was made to determine the applicability of this technique for the detection of contaminants such as the presence of ammonia gas. The conducted research confirmed the analytical possibilities of examining the main components of biogas. The content of biogas pollutants may turn out to be too low for their determination in the case of trace amounts, and in such a case the IR spectrometry may turn out to be insufficient, e.g. to assess the effectiveness of biogas purification processes, therefore it should be used in conjunction with the GC analysis.
Źródło:
Nafta-Gaz; 2022, 78, 8; 630-636
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the backlash in the single stage cycloidal gearbox
Autorzy:
Król, Roman
Powiązania:
https://bibliotekanauki.pl/articles/27309870.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
cycloidal gearbox
backlash
dynamics
multibody dynamics
multibody simulation
discrete Fourier transform
spectral analysis
FFT
przekładnia cykloidalna
reakcja
dynamika
dynamika wieloczłonowa
symulacja wieloobiektowa
dyskretna transformata Fouriera
analiza spektralna
Opis:
In this paper the analysis of backlash influence on the spectrum of torque at the output shaft of a cycloidal gearbox has been performed. The model of the single stage cycloidal gearbox was designed in the MSC Adams. The analysis for the excitation with the torque and the analysis with constant angular velocity of the input shaft were performed. For these analyses, the amplitude spectrums of the output torque for different backlashes was solved using FFT algorithm. The amplitude spectrums of the combined sine functions composed of the impact to impact times between the cycloidal wheel and the external sleeves were computed for verification. The performed studies show, that the backlash has significant influence on the output torque amplitude spectrum. Unfortunately the dependencies between the components of the spectrum and the backlash could not be expressed by linear equations, when vibrations of the output torque in the range of (350 Hz – 600 Hz) are considered. The gradual dependence can be found in the spectrum determined for the combined sine functions with half-periods equal impact-to-impact times. The spectrum is narrower for high values of backlash.
Źródło:
Archive of Mechanical Engineering; 2022, LXIX, 4; 693--711
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anatomical and functional assessment of patency of the upper respiratory tract in selected respiratory disorders - Part 2
Autorzy:
Zając, Andrzej
Kukwa, Andrzej
Barański, Robert
Nitkiewicz, Szymon
Zomkowska, Edyta
Rybak, Adam
Powiązania:
https://bibliotekanauki.pl/articles/2173877.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
optical diagnostic in otolaryngology
upper respiratory tract diagnostics
otolaryngology
spirometer
Fourier transform
wavelet transform
quantitative parameters of the respiratory cycle
Opis:
This article presents selected physical diagnostic methods used in otorhinolaryngology and results of their application. In addition to the applications of methods using the capabilities of selective sensors, selected methods of hybrid diagnostics were also presented - for assessment of parameters of respiratory processes, with polysomnography as an example of using both typical diagnostic methods dedicated to otolaryngology, as well as standard EEG and ECG methods. It has been shown that in some special cases of respiratory disorders, measurements of the air flow in the respiratory tract can be supplemented with pressure measurements in selected positions within the airways. The presented optical methods and diagnostic systems are very often used in the diagnosis of diseases not specific for otolaryngology occurring in the area of the head and neck. The presented material is the second part of the study discussing both standard and widely used diagnostic methods. All presented methods are dedicated to otolaryngology. This text is a continuation of the material published in No 4 of 2021 [1].
Źródło:
Metrology and Measurement Systems; 2022, 29, 3; 429--454
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Construction of Generalized Rademacher Functions in Terms of Ternary Logic : Solving the Problem of Visibility of Using Galois Fields for Digital Signal Processing
Autorzy:
Vitulyova, Elizaveta S.
Matrassulova, Dinara K.
Suleimenov, Ibragim E.
Powiązania:
https://bibliotekanauki.pl/articles/2055235.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
digital signal processing
non-binary Galois fields
fourier transform
rademacher functions
walsh function
multivalued logic
visibility problem
algebraic extensions
ternary representation of number
Opis:
Generalized Rademacher functions, constructed as a sequence of elements of Galois fields are intended to find the spectral representation of signals with levels. These functions form a complete basis on the interval corresponding to -1 discrete time intervals and for passing into the classical Rademacher functions. The advantage of such spectra obtained using Galois Fields Fourier Transform is that the range of variation of the spectrum amplitudes remains the same as the range of variation of the original signal, which is modeled on discrete time functions taking values in the Galois field.
Źródło:
International Journal of Electronics and Telecommunications; 2022, 68, 2; 237--244
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of a tribotechnical diagnostics model for determining the technical condition of an internal combustion engine during its life cycle
Autorzy:
Furch, Jan
Jelínek, Josef
Powiązania:
https://bibliotekanauki.pl/articles/2172026.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
tribotechnical diagnostic
Fourier transform-infrared spectrometry
kinematic viscosity
atomic emission spectrometry
ferrography
Opis:
The paper proposes a model of tribotechnical diagnostics, which allows us to determine the technical condition of an internal combustion engine within its life cycle and then take measures, including its decommissioning due to excessive wear of major components. The paper also focuses on tribodiagnostic methods that are suitable for assessing the technical condition of internal combustion engines used in various means of transport (automobiles, railway locomotives powered by internal combustion engines, aircraft powered by reciprocating internal combustion engines, special and garden equipment). An internal combustion engine from agricultural equipment was selected for the experiment and monitored throughout its life cycle. The paper describes in detail the appropriate methods used for the proposed tribotechnical diagnostics model, including the results from the measurements by these methods. The said methods were then evaluated and mutually compared. The following advanced instrumental analytical methods were used to evaluate the collected engine oil samples: atomic emission spectrometry (AES), ferrography, automatic laser counter and LNF particle classifier, FTIR infrared spectrometry. The result of the work (paper) is the design of a tribotechnical diagnostics model for determining the technical condition of an internal combustion engine during its life cycle and the determination of limit values for assessing the technical condition of a Honda GCV 165 internal combustion engine. The results are based on individual measurements.
Źródło:
Eksploatacja i Niezawodność; 2022, 24, 3; 437--445
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exact solution for heat conduction inside a sphere with heat absorption using the regularized Hilfer-Prabhakar derivative
Autorzy:
Elhadedy, Hager
Latif, Mohamed S. Abdel
Nour, Hamed M.
Kader, Abbas H. Abdel
Powiązania:
https://bibliotekanauki.pl/articles/2175524.pdf
Data publikacji:
2022
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
fractional derivatives
Laplace transform
finite sine-Fourier transform
heat transfer
pochodne ułamkowe
transformata Laplace'a
skończona transformata sinusoidalna-Fouriera
wymiana ciepła
Opis:
In this article, we utilize the finite Sine-Fourier transform and the Laplace transform for solving fractional partial differential equations with regularized Hilfer-Prabhakar derivative. These transforms are used to get analytical solutions for the time fractional heat conduction equation (TFHCE) with the regularized Hilfer-Prabhakar derivative associated with heat absorption in spherical coordinates. Two cases of Dirichlet boundary conditions are considered by obtaining an analytical solution in each case. The effect of the parameters of the regularized Hilfer-Prabhakar derivative on the heat transfer inside the sphere is discussed using some figures.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2022, 21, 2; 27--37
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Image encryption algorithm based on rear-mounted phase mask and random decomposition
Autorzy:
Yadav, Shivani
Singh, Hukum
Powiązania:
https://bibliotekanauki.pl/articles/2086758.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fractional Fourier transform
random decomposition
rear-mounted phase mask
SVD
singular value decomposition
Opis:
To escalate the image encryption a new method has been devised which includes double random phase encoding (DRPE) using rear phase masking and random decomposition (RD) technique stranded on fractional Fourier transform. Here, asymmetric cryptographic system is developed in fractional Fourier transform (FrFT) mode using two random phase masks (RPM) and a rear mounted phase mask. In the projected scheme a colored image is decomposed into R, G and B channels. The amplitude of each channel is normalized, phase encoded and modulated using RPM. The modulated R, G and B channels of the colored image are individually transformed using FrFT to produce corresponding encrypted image. The proposed scheme is authorized on grayscale image also. The norm behind the development of the suggested scheme has been elaborated by carrying out cryptanalysis on system based on the RD. The method helps in escalations of the protection of double random phase encoding by cumulating the key length and the parameter amount, so that it vigorously can be used against various attacks. The forte of the suggested cryptographic system was verified using simulations with MATLAB 7.9.0 (R2008a). The efficiency of the suggested scheme includes the analysis using singular value decomposition (SVD), histogram and correlation coefficient.
Źródło:
Optica Applicata; 2022, 52, 2; 195--212
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Grape Variety, Yeast and Malolactic Fermentation on Volatile Compounds and Fourier Transform Infrared Spectra in Red Wines
Autorzy:
Stój, Anna
Czernecki, Tomasz
Sosnowska, Bożena
Niemczynowicz, Agnieszka
Matwijczuk, Arkadiusz
Powiązania:
https://bibliotekanauki.pl/articles/2019465.pdf
Data publikacji:
2022-03-01
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
fermentation
Saccharomyces cerevisiae
Saccharomyces bayanus
Oenococcus oeni
aroma compounds
Fourier transform infrared spectroscopy
Opis:
Volatile compounds are very important to the flavour and quality of the wine. The study aimed to determine the effect of grape variety (Rondo and Zweigelt), yeast, malolactic fermentation (MLF) and yeast×MLF interaction on the content of volatile compounds in red wines. The wines were produced by sequential inoculation with five commercial yeast strains and a commercial lactic acid bacteria (LAB) strain (induced malolactic fermentation) as well as by inoculation with five commercial yeast strains and without LAB inoculation (spontaneous malolactic fermentation). The volatile compounds were determined by headspace solid-phase microextraction/gas chromatography-mass spectrometry (HS-SPME-GC/MS). Forty-six volatile compounds belonging to alcohols, esters, acids, aldehydes, ketones, furan compounds, sulfur compounds and volatile phenols were identified in the wines. The grape variety was the factor with a significant impact on the highest number of volatile compounds, 32 out of 46. Furthermore, 7 compounds were affected by yeast, 10 by MLF and only 3 by yeast×MLF interaction. Characteristic bands in Fourier transform infrared (FTIR) spectra were assigned to the vibrations of functional groups of volatile compounds. The whole FTIR spectra were analysed in detail; three characteristic spectral ranges for different classes of volatile compounds such as 3650-2700, 1750-1500, and below 1500 cm-1 were shown. The most remarkable spectral changes were observed for the last two areas.
Źródło:
Polish Journal of Food and Nutrition Sciences; 2022, 72, 1; 39-55
1230-0322
2083-6007
Pojawia się w:
Polish Journal of Food and Nutrition Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of non-ideal signal sampling via averaging operation and spectrum of sampled signal predicted by this model
Autorzy:
Borys, A.
Powiązania:
https://bibliotekanauki.pl/articles/2172501.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
modelling of non-Ideal signal sampling
non-Ideal signal
spectrum of sampled signal
A/D converters
non-Ideal signal sampling
signal sampling
discrete time fourier transform
Opis:
In this paper, a novel model of a non-ideal signal sampling via a local, periodic averaging operation is present-ed. The spectrum of a sampled signal predicted by this model is also analysed as well as compared with a one following from another model.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2022, 16, 2; 274--278
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of gear teeth in the wind turbine drive train with gear contact’s uncertainty using the reliability-based design optimization
Autorzy:
Lee, Changwoo
Park, Yonghui
Powiązania:
https://bibliotekanauki.pl/articles/27309867.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
wind turbine
drive train
gear
structural analysis
dynamics
Fourier transform
reliability based design optimization
turbina wiatrowa
układ napędowy
bieg
analiza strukturalna
dynamika
optymalizacja projektu oparta na niezawodności
Opis:
Although gear teeth give lots of advantages, there is a high possibility of failure in gear teeth in each gear stage in the drive train system. In this research, the authors developed proper gear teeth using the basic theorem of gear failure and reliability-based design optimization. A design variable characterized by a probability distribution was applied to the static stress analysis model and the dynamics analysis model to determine an objective function and constraint equations and to solve the reliability-based design optimization. For the optimization, the authors simulated the torsional drive train system which includes rotational coordinates. First, the authors established a static stress analysis model which gives information about endurance limit and bending strength. By expressing gear mesh stiffness in terms of the Fourier series, the equations of motion including the gear mesh models and kinematical relations in the drive train system were acquired in the form of the Lagrange equations and constraint equations. For the numerical analysis, the Newmark Beta method was used to get dynamic responses including gear mesh contact forces. From the results such as the gear mesh contact force, the authors calculated the probability of failure, arranged each probability and gear teeth, and proposed a reasonable and economic design of gear teeth.
Źródło:
Archive of Mechanical Engineering; 2022, LXIX, 4; 713--728
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pre-treatment effect on the structure of bacterial cellulose from Nata de Coco (Acetobacter xylinum)
Wpływ wstępnej obróbki na strukturę celulozy bakteryjnej z Nata de Coco (Acetobacter xylinum)
Autorzy:
Rusdi, Rusaini Athirah Ahmad
Halim, Norhana Abdul
Nurazzi, Mohd Norizan
Abidin, Zul Hazrin Zainal
Abdullah, Norli
Che Ros, Fadhlina
Ahmad, Nurazlin
Azmi, Ahmad Farid Mohd
Powiązania:
https://bibliotekanauki.pl/articles/2088276.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
bacterial cellulose
structure
X-ray diffraction
Fourier transform infrared spectroscopy
field emission scanning electron microscopy
celuloza bakteryjna
struktura
dyfrakcja rentgenowska
spektroskopia w podczerwieni z transformacją Fouriera
skaningowa mikroskopia elektronowa z emisją polową
Opis:
This paper presents a structural analysis of various methods to produce bacterial cellulose (BC) from Nata de Coco (Acetobacter xylinum). BC sheet, BC chem and BC mech powders were successfully prepared using oven drying, chemical and mechanical treatment. The X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and field emission scanning electron microscopy (FESEM) were used to analyze the structure of prepared BC. The structure of bacterial cellulose was compared with the structure of commercial microcrystalline cellulose (MCC) and cotton fabric. The XRD results showed that the BC sheet sample had the highest degree of crystallinity (81.76%) compared to cotton cellulose (75.73%). The crystallite size of cotton was larger than the BC sheet, with the value of 6.83 ηm and 4.55 ηm, respectively. The peaks in the FTIR spectra of all BC were comparable to the commercial MCC and cotton fabrics. FESEM images showed that the prepared BC sheet, BC mech, and BC chem had an almost similar structure like commercial MCC and cotton fabric. It was concluded that simple preparation of BC could be implemented and used for further BC preparation as reinforcement in polymer composites, especially in food packaging.
Niniejszy artykuł zawiera analizę struktury celulozy bakteryjnej (BC) wytworzonej z Nata de Coco (Acetobacter xylinum) różnymi metodami. Folia BC i proszki BC chem oraz BC mech zo -stały wytworzone poprzez suszenie w piecu, obróbkę chemiczną i mechaniczną. Do oceny struktury celulozy bakteryjnej stosowano dyfrakcję rentgenowską (XRD), spektroskopię Fouriera w podczerwieni (FTIR) i skaningową mikroskopię elektronową z emisją polową (FESEM). Strukturę celulozy bakteryjnej porównano ze strukturą handlowej celulozy mikrokrystalicznej (MCC) i tkaniny bawełnianej. Wyniki XRD wykazały, że najwyższy stopień krystaliczności miała próbka arkusza BC (81,76%) w porównaniu z celulozą bawełnianą (75,73%). Wielkość krystalitów bawełny była większa niż folii BC i wynosiła, odpowiednio, 6,83 ηm oraz 4,55 ηm. Piki widm FTIR wszystkich otrzymanych form celulozy bakteryjnej były porównywalne z komercyjnymi tkaninami bawełnianymi i z celulozy mikrokrystalicznej. Zdjęcia FESEM folii BC oraz proszków BC mech i BC chem również były podobne do komercyjnej MCC i tkaniny bawełnianej. Stwierdzono, że z wykorzystaniem prostych technik można otrzymać BC, która może być stosowana jako wzmocnienie w kompozytach polimerowych, w szczególności w opakowaniach do żywności.
Źródło:
Polimery; 2022, 67, 3; 110--118
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spectral analysis for tilted fiber Bragg gratings in the corrosion detection for concrete structure
Autorzy:
Kwong, Kok Zee
Udos, Waldo
Lim, Kok-Sing
Lee, Foo Wei
Tan, Chee Ghuan
Samion, Muhamad Zharif
Ahmad, Harith
Powiązania:
https://bibliotekanauki.pl/articles/2172827.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tilted fibre Bragg grating
optical spectral analysis
Fourier transform
corrosion
steel bar
Opis:
An effective corrosion monitoring technique is sought after by the engineers for assessing the steel bar corrosion at the early stage for the maintenance and repair works, especially in the corrosive environments, such as coastal and marine. In this work, tilted fiber Bragg grating (TFBG) with the optical sensor is employed in corrosion monitoring of a reinforced concrete structure. Taking advantage of the high sensitivity of TFBG cladding resonance wavelengths to the change in the surrounding medium, the sensor is mounted on the steel bar that is embedded in a concreted block during an accelerated corrosion process. The acquired transmission spectrum of the TFBG during the procedure is digitally processed using Fourier Transform to produce an index that is sensitive to the generated corrosion product surrounding the TFBG sensor. This eases the analysis of the sophisticated TFBG transmission spectra. The generated index can be used as an indicator (indicator J ) for the corrosion process of the embedded steel bar in the concrete structure. This indicator J can act as an indicator to describe the corrosion activity and corrosion level at a specific point of the steel bar in concrete structures.
Źródło:
Optica Applicata; 2022, 52, 3; 429--439
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stator winding fault detection of permanent magnet synchronous motors based on the bispectrum analysis
Autorzy:
Pietrzak, Przemysław
Wolkiewicz, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2173641.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fault diagnosis
condition monitoring
inter-turn short circuits
permanent magnet synchronous motor
bispectrum
fast Fourier transform
błędna diagnoza
monitorowanie stanu
zwarcia międzyzwojowe
silnik synchroniczny z magnesami trwałymi
bispektrum
szybka transformata Fouriera
Opis:
The popularity of high-efficiency permanent magnet synchronous motors in drive systems has continued to grow in recent years. Therefore, also the detection of their faults is becoming a very important issue. The most common fault of this type of motor is the stator winding fault. Due to the destructive character of this failure, it is necessary to use fault diagnostic methods that facilitate damage detection in its early stages. This paper presents the effectiveness of spectral and bispectrum analysis application for the detection of stator winding faults in permanent magnet synchronous motors. The analyzed diagnostic signals are stator phase current, stator phase current envelope, and stator phase current space vector module. The proposed solution is experimentally verified during various motor operating conditions. The object of the experimental verification was a 2.5 kW permanent magnet synchronous motor, the construction of which was specially prepared to facilitate inter-turn short circuits modelling. The application of bispectrum analysis discussed so far in the literature has been limited to vibration signals and detecting mechanical damages. There are no papers in the field of motor diagnostic dealing with the bispectrum analysis for stator winding fault detection, especially based on stator phase current signal.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2022, 70, 2; art. no. e140556
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stator Winding Fault Detection of Permanent Magnet Synchronous Motors Based on the Short-Time Fourier Transform
Autorzy:
Pietrzak, Przemysław
Wolkiewicz, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2175935.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fault diagnosis
condition monitoring
inter-turn short circuit
permanent magnet synchronous motor
short-time Fourier transform
Opis:
In modern drive systems, the high-efficient permanent magnet synchronous motors (PMSMs) have become one of the most substantial components. Nevertheless, such machines are exposed to various types of faults. Hence, on-line condition monitoring and fault diagnosis of PMSMs have become necessary. One of the most common PMSM faults is the stator winding fault. Due to the destructive character of this failure, it is necessary to use fault diagnostic methods that allow fault detection at its early stage. The article presents the results of experimental studies obtained from fast Fourier transform (FFT) and short-time Fourier transform (STFT) analyses of the stator phase current, stator phase current envelope and stator phase current space vector module. The superiority of the proposed method over the classical approach based on the stator current analysis using FFT is highlighted. The proposed solution is experimentally verified under various motor operating conditions. The application of STFT analysis discussed so far in the literature has been limited to the fault diagnosis of induction motors and the narrow range of the analysed motor operating conditions. Moreover, there are no works in the field of motor diagnostics dealing with STFT analysis for stator windings based on the stator current envelope and the stator current space vector module.
Źródło:
Power Electronics and Drives; 2022, 7, 42; 112--133
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Template Matching Using Improved Rotations Fourier Transform Method
Autorzy:
Wijaya, Marvin Chandra
Powiązania:
https://bibliotekanauki.pl/articles/2200717.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
template matching
Fourier transform
three shear rotations
image rotation
Opis:
Template matching is a process to identify and localize a template image on an original image. Several methods are commonly used for template matching, one of which uses the Fourier transform. This study proposes a modification of the method by adding an improved rotation to the Fourier transform. Improved rotation in this study uses increment rotation and three shear methods for the template image rotation process. The three shear rotation method has the advantage of precise and noisefree rotation results, making the template matching process even more accurate. Based on the experimental results, the use of 10°angle increments has increased template matching accuracy. In addition, the use of three shear rotations can improve the accuracy of template matching by 13% without prolonging the processing time.
Źródło:
International Journal of Electronics and Telecommunications; 2022, 68, 4; 881--888
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Behavior of Jordanian Oil Shale during Combustion Process from the El-Lajjun Deposit
Autorzy:
Gougazeh, Mousa
Alsaqoor, Sameh
Borowski, Gabriel
Alsafasfeh, Ashraf
Hdaib, Ismail I.
Powiązania:
https://bibliotekanauki.pl/articles/2173323.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
El-Lajjun oil shale
combustion
X-ray diffraction
thermogravimetric
fourier transform infrared spectroscopy
X-ray fluorescence
Opis:
The results of X-ray diffraction, thermogravimetric and FTIR spectroscopy analyses of mineral composition indicated that the El-Lajjun oil shale is principally composed of calcite, quartz with minor amounts of kaolinite), gypsum, and apatite. The obtained oil shale ash products at 830 °C and 1030 °C are dominated by lime, quartz, anhydrite, portlandite, gehlenite, and amorphous phases. The TGA weight loss curves clearly indicate that it occurred in the temperature range from 310 to 650 °C. The decomposition of oil shale carbonates was detected above 750°C. The functional groups in the organic material of oil shale are dominated by the aliphatic hydrocarbons, the semi-ash of which had diverse structures of polycyclic aromatic hydrocarbons. The most intensive of combustion occurred in the temperature range of 400–750 °C. In this temperature range, about 75 wt.% was accounted for the total mass loss.
Źródło:
Journal of Ecological Engineering; 2022, 23, 8; 133--140
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using the MIMO method to evaluate the modal properties of the elements of a wheelset in an active experiment
Autorzy:
Milewicz, Julia
Mokrzan, Daniel
Nowakowski, Tomasz
Szymański, Grzegorz M.
Powiązania:
https://bibliotekanauki.pl/articles/24202007.pdf
Data publikacji:
2022
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
modal analysis
FRF
fast Fourier transform
light railway vehicle
wheelset
analiza modalna
szybka transformata Fouriera
lekki pojazd szynowy
zestaw kołowy
Opis:
The study of the system composed of the inner disc and wheel rim of the 105Na type railway wheel, used in Polish Konstal streetcars, was aimed at determining the dynamic parameters of the object, such as the form and frequency of natural vibrations, and at evaluating the effectiveness of the method at given analysis settings. The experiment was conducted using triaxial piezoelectric transducers and a modal hammer with an aluminum head. A multiple-input, multiple-output (MIMO) testing approach was used because of the multiple excitation points and vibration measurements. A Fast Fourier Transform (FFT) of the measurements was performed in BK Connect software and the frequency response function (FRF) value waveforms were determined. The Rational Fraction Polynomial-Z method was used to extract modes from the frequency spectrum. In addition, the Complex Mode Indicator Function method was used, which resulted in the decomposition of the principal components of the FRF value matrix, allowing the identification of individual modes. The selection of the natural frequencies was performed on the basis of the obtained FRF and CMIF characteristics of the vibroacoustic response. Visualization of the form of the natural vibration was also performed. The result of the experiment was a set of comprehensive information on the modal properties of the studied object, which allowed to confirm the effectiveness of the selected method of analysis.
Źródło:
Vibrations in Physical Systems; 2022, 33, 3; art. no. 2022324
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Active Cancellation of the Tonal Component of Sound Using a Discrete Fourier Transform of Variable Length
Autorzy:
Łuczyński, Michał
Dobrucki, Andrzej
Brachmański, Stefan
Powiązania:
https://bibliotekanauki.pl/articles/2097702.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
active noise control
tonal signal
Discrete Fourier Transform
Opis:
The paper presents a method of eliminating the tonal component of an acoustic signal. The tonal component is approximated by a sinusoidal signal of a given amplitude and frequency. As the parameters of this component: amplitude, frequency and initial phase may be variable, it is important to detect these parameters in subsequent analysis time intervals (frames). If the detection of the parameters is correct, the elimination consists in adding a sinusoidal component with the detected amplitude and frequency to the signal, but the phase shifted by 180 degrees. The accuracy of the reduction depends on the accuracy of parameters detection and their changes. Detection takes place using the Discrete Fourier Transform, whose length is changed to match the spectrum resolution to the signal frequency. The operation for various methods of synthesis of the compensating signal as well as various window functions were checked. An elimination simulation was performed to analyze the effectiveness of the reduction. The result of the paper is the assessment of the method in narrowband active noise control systems. The method was tested by simulation and then experimentally with real acoustic signals. The level of reduction was from 6.9 to 31.5 dB.
Źródło:
Archives of Acoustics; 2021, 46, 4; 579-589
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of solutions of the 1D fractional Cattaneo heat transfer equation
Autorzy:
Siedlecka, Urszula
Ciesielski, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/2175501.pdf
Data publikacji:
2021
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
heat transfer
Cattaneo equation
fractional Caputo derivative
Laplace transform
Fourier transform
wymiana ciepła
równanie Cattaneo
pochodna ułamkowa Caputo
transformata Laplace'a
transformata Fouriera
Opis:
In this paper, a solution of the single-phase lag heat conduction problem is presented. The research concerns the generalized 1D Cattaneo equation in a whole-space domain, where a second order time derivative is replaced by the fractional Caputo derivative. The Fourier-Laplace transform technique is used to determine a solution of the considered problem. The numerical inversion of the Laplace transforms is applied. The effect of the order of the fractional derivative on the temperature distribution is investigated.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2021, 20, 4; 87--98
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anatomical and functional assessment of patency of the upper respiratory tract in selected respiratory disorders - Part 1
Autorzy:
Kukwa, Andrzej
Zając, Andrzej
Barański, Robert
Nitkiewicz, Szymon
Kukwa, Wojciech
Zomkowska, Edyta
Rybak, Adam
Powiązania:
https://bibliotekanauki.pl/articles/2052154.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
optical diagnostic in otolaryngology
upper respiratory tract diagnostics
otolaryngology
spirometer
Fourier transform
wavelet transform
quantitative parameters of the respiratory cycle
Opis:
The rapidly developing measurement techniques and emerging new physical methods are frequently used in otolaryngological diagnostics. A wide range of applied diagnostic methods constituted the basis for the review study aimed at presenting selected modern diagnostic methods and achieved diagnostic results to a wider group of users. In this part, the methods based on measuring the respiratory parameters of patients were analysed. Respiration is the most important and necessary action to support life and its effective duration. It is an actual gas exchange in the respiratory system consisting of removing CO2 and supplying O2. Gas exchange occurs in the alveoli, and an efficient respiratory tract allows for effective ventilation. The disruption in the work of the respiratory system leads to measurable disturbances in blood saturation and, consequently, hypoxia. Frequent, even short-term, recurrent hypoxia in any part of the body leads to multiple complications. This process is largely related to its duration and the processes that accompany it. The causes of hypoxia resulting from impaired patency of the respiratory tract and/or the absence of neuronal respiratory drive can be divided into the following groups depending on the cause: peripheral, central and/or of mixed origin. Causes of the peripheral form of these disorders are largely due to the impaired patency of the upper and/or lower respiratory tract. Therefore, early diagnosis and location of these disorders can be considered reversible and not a cause of complications. Slow, gradually increasing obstruction of the upper respiratory tract (URT) is not noticeable and becomes a slow killer. Hypoxic individuals in a large percentage of cases have a shorter life expectancy and, above all, deal with the consequences of hypoxia much sooner.
Źródło:
Metrology and Measurement Systems; 2021, 28, 4; 813-836
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Spectral and Wavelet Analysis of Stator Current to Detect Angular Misalignment in PMSM Drive Systems
Autorzy:
Pietrzak, Przemysław
Wolkiewicz, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/1956007.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fault diagnosis
permanent magnet synchronous motor
angular misalignment
fast Fourier transform
discrete wavelet transform
Opis:
This paper deals with the selected methods of detecting angular misalignment in drive systems with a permanent magnet synchronous motor (PMSM), which are based on the analysis of the stator phase current signal, as well as their experimental verification and comparison. The proposed and compared methods are spectral analysis and wavelet analysis of the stator current, stator current envelope, stator current space vector module. Furthermore, the influence of power supply frequency and load torque on the performance of the proposed diagnostic methods is also discussed. The experimental tests were carried out for an undamaged motor and for two levels of angular misalignment. The article discusses the question of exactly what damage symptoms can be extracted from each of the methods. In the case of spectral analyses, it is demonstrated which multiplicities of the failure frequency are the most sensitive to misalignment and the least sensitive to changes in motor operating condition, which may be considered novel in the case of drive systems with permanent magnet motors. It is also proven that discrete wavelet transform (DWT) of the envelope and monitoring of the value of the relevant components allows the detection of misalignment with the availability of measuring current only in one phase in various motor operating conditions.
Źródło:
Power Electronics and Drives; 2021, 6, 41; 42-60
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Certain properties of continuous fractional wavelet transform on Hardy space and Morrey space
Autorzy:
Verma, Amit K.
Gupta, Bivek
Powiązania:
https://bibliotekanauki.pl/articles/2049016.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
fractional Fourier transform
continuous fractional wavelet transform
Hardy space
Morrey space
Opis:
In this paper we define a new class of continuous fractional wavelet transform (CFrWT) and study its properties in Hardy space and Morrey space. The theory developed generalize and complement some of already existing results.
Źródło:
Opuscula Mathematica; 2021, 41, 5; 701-723
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chaotic assessment of the heave and pitch dynamics motions of air cushion vehicles
Autorzy:
Sowayan, A. S.
Powiązania:
https://bibliotekanauki.pl/articles/1839831.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
transformata Fouriera
poduszka powietrzna
model pojazdu
air cushion vehicles
Poincaré map
fast Fourier transform
heave motion
pitching motion
Opis:
In this study, a three degrees of freedom nonlinear air cushion vehicle (ACV) model is introduced to examine the dynamic behavior of the heave and pitch responses in addition to the cushion pressure of the ACV in both time and frequency domains. The model is based on the compressible flow Bernoulli’s equation and the thermodynamics nonlinear isentropic relations along with the Newton second law of translation and rotation. In this study, the dynamical investigation was based on a numerical simulation using the stiff ODE solvers of the Matlab software. The chaotic investigations of the proposed model are provided using the Fast Fourier Transform (FFT), the Poincaré maps, and the regression analysis. Three control design parameters are investigated for the chaotic studies. These parameters are: ACV mass (M), the mass flow rate entering the cushion volume (in), and the ACV base radius (r). Chaos behavior was observed for heave, and pitch responses as well as the cushion pressure.
Źródło:
International Journal of Applied Mechanics and Engineering; 2021, 26, 2; 219-234
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Classification of Seizure Types Using Random Forest Classifier
Autorzy:
Basri, Ashjan
Arif, Muhammad
Powiązania:
https://bibliotekanauki.pl/articles/2123290.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
EEG
fast fourier transform
seizure
random forest
Opis:
Epilepsy is one of the most common mental disorders in the world, affecting 65 million people. The prevalence in Arab countries of Epilepsy is estimated at 174 per 100,000 individuals, and in Saudi Arabia is 6.54 per 1,000 individuals. Epilepsy seizures have different types, and each patient needs to have a treatment plan according to the seizure type. Hence, accurate classification of seizure type is an essential part of diagnosing and treating epileptic patients. In this paper, features based on fast Fourier transform from EEG montages are used to classify different types of seizures. Since the distribution of classes is not uniform and the dataset suffers from severe imbalance. Various algorithms are used to under-sample the majority class and over-sample the minority classes. Random forest classifier produced classification accuracy of 96% to differentiate three types of seizures from the healthy EEG reading.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 3; 167--178
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of multiband filtering, empirical mode decomposition and short-time fourier transform used to extract physiological components from long-term heart rate variability
Autorzy:
Adamczyk, Krzysztof
Polak, Adam G.
Powiązania:
https://bibliotekanauki.pl/articles/2052173.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heart rate variability
nonstationary signal analysis
multiband filtering
empirical mode decomposition
short-time Fourier transform
Hilbert transform
Opis:
Heart rate is constantly changing under the influence of many control signals, as manifested by heart rate variability (HRV). HRV is a nonstationary, irregularly sampled signal, the spectrum of which reveals distinct bands of high, low, very low and ultra-low frequencies (HF, LF, VLF, ULF). VLF and ULF components are the least understood, and their analysis requires HRV records lasting many hours. Moreover, there are still no well-established methods for the reliable extraction of these components. The aim of this work was to select, implement and compare methods which can solve this problem. The performance of multiband filtering (MBF), empirical mode decomposition and the short-time Fourier transform was tested, using synthetic HRV as the ground truth for methods evaluation as well as real data of three patients selected from 25 polysomnographic records with a clear HF component in their spectrograms. The study provided new insights into the components of long-term HRV, including the character of its amplitude and frequency modulation obtained with the Hilbert transform. In addition, the reliability of the extracted HF, LF, VLF and ULF waveforms was demonstrated, and MBF turned out to be the most accurate method, though the signal is strongly nonstationary. The possibility of isolating such waveforms is of great importance both in physiology and pathophysiology, as well as in the automation of medical diagnostics based on HRV.
Źródło:
Metrology and Measurement Systems; 2021, 28, 4; 643-660
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ellipsometry based spectroscopic complex for rapid assessment of the Bi2Te3-xSexthin films composition
Elipsometryczny system spektroskopowy do szybkiej oceny składu cienkich warstw Bi2Te3-xSex
Autorzy:
Kovalev, Vladimir
Uvaysov, Saygid
Bogucki, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2070267.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
thin films
optical properties
spectroscopy
Fourier transform
ellipsometry and polarimetry
optics on surfaces
instrumentation
measurement and metrology
cienka warstwa
właściwości optyczne
spektroskopia
transformata Fouriera
elipsometria i polarymetria
optyka cienkowarstwowa
oprzyrządowanie
pomiary i metrologia
Opis:
A comparative analysis of the current state and development of spectral ellipsometry (SE) is carried out, the main limitations typical of popular configurations of measuring devices are determined. An original technical solution is proposed that allows one to create a two-source SE that implements the ellipsometry method with switching orthogonal polarization states. The measuring setup provides high precision of measurements of ellipsometric parameters Ψand Δin the spectral range of 270–2200 nm and the speed determined by the characteristics of pulsed sources with a simple ellipsometer design.As objects for experimental researches, confirming the efficiency and high precision qualities of the fabricated SE, we used a GaAs/ZnS-quarter-wave device for a CO2laser and SiO2on Si calibration plates. The optical properties of Bi2Te3-xSexfilms were investigated in the range of 270–1000 nm using a multi-angle SE. It was shown that the optical properties of Bi2Te3-xSexfilms monotonically change depending on the ratio of selenium and tellurium.
W artykule najpierw dokonano analizy porównawczej obecnego stanu rozwoju elipsometriispektroskopowej oraz określono główne ograniczenia typowe dla popularnych konfiguracji urządzeń pomiarowych. Zaproponowano oryginalne rozwiązanie techniczne pozwalające na stworzenie dwuźródłowego elipsometu spektroskopowego z przełączaniem ortogonalnych stanów polaryzacji. Układ pomiarowy zapewnia wysoką precyzję pomiarów parametrów elipsometrycznych Ψ i Δ w zakresie spektralnym 270–2200 nm i prędkości wyznaczonej przez charakterystyki źródeł impulsowych przy prostej konstrukcji elipsometru. Jako obiekty do badań eksperymentalnych potwierdzających wydajność i wysoką precyzję proponowanego elipsometu spektroskopowego, wykorzystano ćwierćfalowy przyrząd GaAs/ZnS dla lasera CO2oraz płytki kalibracyjne SiO2na krzemie. Właściwości optyczne warstw Bi2Te3-xSexzbadano w zakresie 270–1000 nm przy użyciu wielokątowego elipsometu spektroskopowego. Wykazano, że właściwości optyczne cienkich warstw Bi2Te3-xSexzmieniają się monotonicznie w zależności od stosunku zawartości selenu i telluru.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2021, 11, 4; 67--74
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fault diagnosis method for an aerospace generator rotating rectifier based on dynamic FFT technology
Autorzy:
Feng, Sai
Cui, Jiang
Zhang, Zhuoran
Powiązania:
https://bibliotekanauki.pl/articles/1849142.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aerospace generator
rotating rectifier
fault diagnosis
dynamic Fast Fourier Transform
feature extraction
Opis:
A fault diagnosis method for the rotating rectifier of a brushless three-phase synchronous aerospace generator is proposed in this article. The proposed diagnostic system includes three steps: data acquisition, feature extraction and fault diagnosis. Based on a dynamic Fast Fourier Transform (FFT), this method processes the output voltages of aerospace generator continuously and monitors the continuous change trend of the main frequency in the spectrum before and after the fault. The trend can be used to perform fault diagnosis task. The fault features of the rotating rectifier proposed in this paper can quickly and effectively distinguish single and double faulty diodes. In order to verify the proposed diagnosis system, simulation and practical experiments are carried out in this paper, and good results can be achieved.
Źródło:
Metrology and Measurement Systems; 2021, 28, 2; 269-288
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fourier, Laguerre, Laplace Transforms with applications
Autorzy:
Aghili, Arman
Powiązania:
https://bibliotekanauki.pl/articles/2052384.pdf
Data publikacji:
2021
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
Fourier transform
Laplace transform
Laguerre transform
singular integral equation
Bessel's functions
fractional heat equation
przekształcenie Fouriera
przekształcenie Laplace'a
przekształcenie Laguerre'a
osobliwe równanie całkowe
funkcje Bessela
ułamkowe równanie ciepła
Opis:
In this article, the author considered certain time fractional equations using joint integral transforms. Transform method is a powerful tool for solving singular integral equations, integral equation with retarded argument, evaluation of certain integrals and solution of partial fractional differential equations. The obtained results reveal that the transform method is very convenient and effective. Illustrative examples are also provided.
Źródło:
Journal of Mathematics and Applications; 2021, 44; 5-17
1733-6775
2300-9926
Pojawia się w:
Journal of Mathematics and Applications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Performance DIF-FFT Using Dissimilar Partitioned LUT Based Distributed Arithmetic
Autorzy:
Cheepurupalli, Kusma Kumari
Charan, Muntha
Rao, Jammu Bhaskara
Noor, Mahammad S.
Powiązania:
https://bibliotekanauki.pl/articles/2055270.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fast Fourier transform
adders
distributed arithmetic
DSP
Opis:
Real-time data processing systems utilize Digital Signal Processing (DSP) functions as the base modules. Most of the DSP functions involve the implementation of Fast Fourier Transform (FFT) to convert the signals from one domain to another domain. The major bottleneck of Decimation in frequency - Fast Fourier Transform (DIF-FFT) implementation lies in using a number of Multipliers. Distributed arithmetic (DA) is considered as one of the efficient techniques to implement DIF-FFT. In this approach, the multipliers are not used. The proposed technique exploits the very advantage of the look-up table by storing the Twiddle factors, thereby avoiding the multipliers required in the butterfly structure. DIF-FFT using Distributed Arithmetic (DIF-FFT DA) models, with different adders such as Ripple carry adder (RCA), Carry-lookahead adder (CLA), and Sklansky prefix graph adder, are proposed in this paper. The three proposed models are synthesized using Cadence 6.1 EDA tools with a 45nm CMOS technology. Compared to the traditional method, it is observed that the area is improved by 53.11%, 53.35%, and 50.15%, power is improved by 42.31%, 42.52%, and 40.39%, and delay is improved by 45.26%, 45.42%, 41.80%, respectively.
Źródło:
International Journal of Electronics and Telecommunications; 2021, 67, 4; 631--637
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
In situ methanolic solvent synthesis, spectroscopic and thermogravimetric characterizations of three new transition metal complexes of trimethoprim drug
Autorzy:
Refat, Moamen S.
Al-Humaidi, Jehan Y.
El-Sayed, Mohamed Y.
Hassan, Reham F.
Powiązania:
https://bibliotekanauki.pl/articles/1849325.pdf
Data publikacji:
2021
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
complexation
trimethoprim
transition metals
TGA
thermogravimetric analysis
FTIR
Fourier transform infrared spectroscopy
ESR
kinetic thermodynamic parameters
Opis:
Trimethoprim drug (TMP) complexes of copper (II), cobalt (II), and nickel (II) were prepared and discussed by using elemental analysis (C, H, N analysis), magnetic, molar conductance, FTIR, Raman spectroscopy, electron spin resonance (ESR) and UV-vis spectroscopy analyses. TMP drug coordinated as a tridentate ligand towards the respected three metal ions through two nitrogen atoms of amino groups and nitrogen atom of pyrimidine ring which flanked between –NH2 groups, these assignments confirmed by spectroscopic, magnetic, ESR and thermogravimetric analyses with formulas [Cu(TMP)(H2O)3]Cl2, [Co(TMP)(H2O)3]Cl2 and [Ni(TMP) (H2O)]Cl2. Copper (II) and cobalt (II) complexes have an octahedral geometrical structure included one TMP molecule, three coordinated water molecules and two uncoordinated chlorine atoms while, nickel(II)–TMP complex has a tetrahedral geometric configuration that involved one TMP molecule, one coordinated water molecule and two uncoordinated chlorine atoms. The activation energies and other kinetic thermodynamic parameters were estimated based on the employed of the Coats-Redfern and Horowitz-Metzger equations. The nano–structured form of the synthesized TMP complexes was confirmed dependent on the transmission electron microscopy (TEM).
Źródło:
Polish Journal of Chemical Technology; 2021, 23, 1; 60-67
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Introduction to Fourier analysis using IT tools of Laboratory of Technical Aids of Teaching IF UJ
Autorzy:
Wietecha, Tomasz
Kurzydło, Piotr M.
Bogacz, Bogdan F.
Powiązania:
https://bibliotekanauki.pl/articles/2014239.pdf
Data publikacji:
2021
Wydawca:
Państwowa Wyższa Szkoła Zawodowa w Tarnowie
Tematy:
Fourier transform
FFT
didactics
motoric aspects of approximation
coach program
transformacja Fouriera
dydaktyka
motoryczne aspekty aproksymacji
program trenerski
Opis:
The general aim of this article is to present didactic aspects of familiarizing students with the Fourier analysis. This didactic process issues through the use of IT tools of Laboratory of Technical Aids of Teaching is discussed. There are four separate computer stations, differing in software, where students learn step by step: composing signals from single harmonics, visualization through images of rotating vectors of harmonic signal composition, operation of a virtual generator of a given number of harmonics and elements of the CMA Coach system in the context of signal analysis. The applied didactic methods are aimed at students of biophysics for whom the Fourier analysis is of practical importance.
Źródło:
Science, Technology and Innovation; 2021, 12, 1; 10-15
2544-9125
Pojawia się w:
Science, Technology and Innovation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mobilny system przetwarzania obrazu oparty na platformie Raspberry Pi 4
Mobile image processing system based on the Raspberry Pi 4 platform
Autorzy:
Chlastawa, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/2014237.pdf
Data publikacji:
2021
Wydawca:
Państwowa Wyższa Szkoła Zawodowa w Tarnowie
Tematy:
cyfrowe przetwarzanie obrazów
dwuwymiarowa szybka transformacja Fouriera
biblioteka OpenCV
aplikacja okienkowa
system wizyjny
digital image processing
two-dimensional fast Fourier transform
OpenCV library
window application
vision system
Opis:
W artykule zaprezentowano system przetwarzania obrazu oparty na platformie Raspberry Pi (RPi). Na początku artykułu omówiono podstawowe założenia oraz cel wykonania systemu. W dalszej części przedstawiono strukturę i sposób działania systemu. Zaprezentowano aplikację okienkową zarządzającą systemem oraz pozwalającą na wykonanie przekształceń kontekstowych oraz widmowych na obrazach, jak również pomiar parametrów, takich jak: czas przetwarzania obrazu oraz błąd średniokwadratowy (ang. Mean Square Error – MSE). Wykonywane przekształcenia oparto zarówno na gotowych formułach zawartych w bibliotece OpenCV, jak również własnych implementacjach, a wśród nich na funkcji realizującej algorytm szybkiej transformacji Fouriera FFT (ang. Fast Fourier Transform) radix-2. Zaprezentowano przykłady przekształceń wraz ze wskazaniem ich użyteczności. Na końcu przedstawiono potencjał rozwojowy utworzonego systemu oraz zaproponowano zastosowanie w konkretnych rozwiązaniach.
The article presents an image processing system based on the Raspberry Pi (RPi) platform. At the beginning of the article, the basic assumptions and purpose of the system are discussed. The following section presents the structure and operation of the system. The window application managing the system and allowing to perform contextual and spectral transformations on images as well as the measurement of parameters such as image processing time and mean square error (MSE) was discussed. The transformations performed were based both on ready formulas contained in the OpenCV library and the author’s implementations, including the function implementing the Fast Fourier Transform algorithm radix-2. Examples of transformations were presented along with their usefulness. In the end, the development potential of the created system is presented and its application in specific solutions is proposed.
Źródło:
Science, Technology and Innovation; 2021, 12, 1; 16-25
2544-9125
Pojawia się w:
Science, Technology and Innovation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance analysis of DFT-S-OFDM waveform for Li-Fi systems
Autorzy:
Hussin, S.
Shalaby, E. Mansour
Powiązania:
https://bibliotekanauki.pl/articles/2063891.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Elektryków Polskich
Tematy:
light-fidelity
visible light communications
orthogonal frequency division multiplexing
discrete Fourier transform spread
peak-to-average power ratio
Opis:
In this paper, the effect of an indoor visible light communication channel is studied. Moreover, the analysis of the received power distribution of the photodiode in the line of sight and the first reflection of the channel without line of sight with several parameters is simulated. Two different waveforms are explained in detail. Orthogonal frequency division multiplexing has been widely adopted in radio frequency and optical communication systems. One of the most important disadvantages of the orthogonal frequency division multiplexing signal is the high peak-to-average power ratio. Therefore, it is important to minimize the peak-to-average power ratio in the visible light communication systems more than in radio-frequency wireless applications. In the visible light communication systems, the high peak-to-average power ratio produces a high DC bias which reduces power efficiency of the system. A discrete Fourier transform spread orthogonal frequency division multiplexing is proposed to be used in wireless communication systems; its ability to minimize peak-to-average power ratio has been tested. The analysis of two different subcarrier allocation methods for the discrete Fourier transform-spread subcarriers, as well as the examination of two distinct subcarrier allocation strategies, distributed and localized mapping, are investigated and studied. The effects of an accurate new sub-band mapping for the localized discrete Fourier transform spread orthogonal frequency division multiplexing scheme are presented in this paper. The light-fidelity system performance of the orthogonal frequency division multiplexing and discrete Fourier transform spread orthogonal frequency division multiplexing with different sub-mapping techniques are simulated with Matlab™. A system performance size of bit error rate and peak-to-average power ratio are obtained, as well.
Źródło:
Opto-Electronics Review; 2021, 29, 4; 167--174
1230-3402
Pojawia się w:
Opto-Electronics Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physicochemical Assessment of the Biodegradability of Agricultural Nonwovens Made of PLA
Ocena fizykochemiczna biodegradowalności agrowłóknin wytworzonych z PLA
Autorzy:
Miros-Kudra, Partycja
Gzyra-Jagieła, Karolina
Kudra, Michał
Powiązania:
https://bibliotekanauki.pl/articles/1419923.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
PLA agricultural nonwovens
degradability
compostability
gel chromatography
GPC
size exclusion chromatography
SEC
Fourier transform infrared spectroscopy
FTIR
agrowłóknina
degradowalność
kompostowalność
chromatografia żelowa
chromatografia wykluczania
spektroskopia w podczerwieni z transformacją Fouriera
Opis:
Compostable biodegradable plastics are an ecological alternative to traditional products based on petroleum derivatives, whose post-use waste may pollute the natural environment. Modern polymer materials show the functional properties of plastics obtained by conventional methods, but they also may be degraded as a result of biochemical transformations in composting. This allows such materials to be included in the scheme of the currently implemented circular economy, which does not generate post-consumer waste. This paper presents methods for the assessment of the biodegradation process of selected agricultural nonwovens produced from commercial PLA 6252D polylactide, supplied by Nature Works® LLC, USA. The agricultural nonwovens tested, obtained by the spun-bond technique, were characterised by different degrees of crystallinity in the range from 11.1% to 31.4%. Biodegradation tests were carried out as simulated aerobic composting while maintaining constant environmental conditions in accordance with test procedures based on PN-EN/ISO standards using the method of sample mass loss determination. Gel chromatography (GPC/SEC) and FTIR spectroscopy were also applied to assess the degree of biodegradation. The aim of this study was to evaluate the effect of the crystallinity of nonwoven made of PLA 6252 D on its degradation in a compost environment.
Kompostowalne tworzywa biodegradowalne są ekologiczną alternatywą dla tradycyjnych produktów opartych na pochodnych ropy naftowej, zalegających i zanieczyszczających środowisko naturalne w formie odpadów poużytkowych. Nowoczesne materiały polimerowe wykazują właściwości użytkowe tworzyw sztucznych otrzymywanych metodami konwencjonalnymi a ponadto ulegają utylizacji na drodze przemian biochemicznych w wyniku kompostowania. Pozwala to na wpisanie się takich materiałów w schemat obecnie pożądanej gospodarki cyrkularnej, która nie generuje odpadów poużytkowych. W niniejszej pracy przedstawiono metody badań biorozkładu wybranych agrowłóknin wytworzonych z komercyjnego polilaktydu PLA 6252D firmy Nature Works® LLC, USA. Badane agrowłókniny otrzymane techniką spun-bonded charakteryzowały się różnymi stopniami krystaliczności w zakresie od 11.1% do 31.4%. Badania biodegradacyjnie prowadzono w procesie symulowanego kompostowania aerobowego z zachowaniem stałych warunków środowiskowych zgodnie z procedurami badawczymi na podstawie norm PN-EN/ISO z wykorzystaniem metody wyznaczania ubytku masy. Do oceny stopnia biodegradacji zastosowano również technikę chromatografii żelowej (GPC/SEC) oraz spektrofotometrię FTIR. Celem pracy było określenie wpływu krystaliczności włóknin wytworzonych z PLA 6252 D na rozkład w środowisku kompostowym.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 1 (145); 26-34
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radial internal clearance analysis in ball bearings
Autorzy:
Ambrożkiewicz, Bartłomiej
Syta, Arkadiusz
Meier, Nicolas
Litak, Grzegorz
Georgiadis, Anthimos
Powiązania:
https://bibliotekanauki.pl/articles/1841795.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
ball bearings
radial internal clearance
statistical analysis
recurrence
fast fourier transform
continuous wavelet transform
Opis:
Radial internal clearance (RIC) is one of the most important parameters influencing on rolling bearing exploitation in mechanical systems. Lifetime of rotary machines strongly depends on a condition of applied rolling elements, thus a study on applied clearance is very important in terms of maintenance and reliability. This paper proposes, a novel approach of studying RIC, based on a nonlinear dynamics method called recurrences. The results are confronted with standard analyses, i.e. statistical condition indicators, Fast Fourier Transform and Continuous Wavelet Transform. The application of the mentioned methods allowed us to find the optimal radial clearance for operating bearings. To ensure precise measurements of the clearance, an automated setup for RIC measurements is applied and next mounted in a plummer block and tested to finally measure vibration acceleration. The proposed methods are useful for a condition monitoring and lifetime prediction of bearings or bearing-based systems in which a proper value of radial clearance is crucial.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 1; 42-54
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sprawdzenie możliwości wykorzystania potencjału mikroskopii IR w branży naftowej
Checking the possibility of using the potential of IR microscopy in the petroleum industry
Autorzy:
Wieczorek, Agnieszka
Sroczyńska, Dagmara
Powiązania:
https://bibliotekanauki.pl/articles/2143571.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
mikroskopia IR
spektrometria w podczerwieni z transformacją Fouriera (FT-IR)
mikroskopia
produkty naftowe
IR microscopy
Fourier transform infrared spectrometry (FT-IR)
microscopy
petroleum products
Opis:
Mikroskopia w podczerwieni z transformacją fourierowską (FT-IR) wykorzystuje dwie techniki badawcze: mikroskopię i spektrometrię FT-IR. Pozwala to na analizę materiału pod kątem występowania charakterystycznych grup funkcyjnych oraz na przedstawienie jego topograficznego rozkładu. Daje to możliwość analizy związków chemicznych w mikroobszarach badanego materiału. Przegląd literatury wskazuje na szerokie zastosowanie tych połączonych technik, m.in. w diagnostyce medycznej, kryminalistyce czy w badaniu jednorodności analitów. Analizie poddawane są tkanki, a także pojedyncze komórki. Wśród zalet połączonych technik jako narzędzia diagnostycznego należy wymienić możliwość rejestracji anomalii składu chemicznego z mikrometrową rozdzielczością przy minimalnej preparatyce, próbki nie wymagają dodatkowego utrwalania materiału do badań ani stosowania żadnych markerów. Niniejszy artykuł ma na celu przedstawienie przykładowych możliwości zastosowania mikroskopii IR w pracy laboratorium naftowego, podczas badania próbek ciekłych oraz stałych w postaci zawiesin czy osadów wytrąconych na elementach zbiorników, silników i różnych urządzeń. Wskazano na konieczność właściwego przygotowania próbek w zależności od ich charakteru oraz rodzaju zastosowanej techniki. Pokazano też możliwości związane z posiadanymi bibliotekami widm oraz mapowania po wybranym obszarze widm. Należy jeszcze raz wskazać na istotną rolę, jaką pełni mikroskopia FT-IR w badaniu próbek niejednorodnych, głównie ze względu na możliwość wytypowania konkretnych punktów pomiarowych o większej koncentracji substancji organicznych w stosunku do obszarów z dużą koncentracją, np. wody. Dzięki temu można w prostszy sposób określać, czy dana substancja lub produkt występujący w miejscu poboru wpływa na powstawanie osadów lub emulsji. Mikroskopia IR umożliwia przede wszystkim prowadzenie analizy niewielkiej ilości próbki, co jest szczególnie ważne w badaniu pobranych substancji w śladowych ilościach.
Fourier transform infrared microscopy (FTIR) uses two research techniques: microscopy and FTIR spectrometry. This allows to analyze fragments in terms of specific functional groups and the presentation of its topographic distribution. It enables the analysis of test results in the micro-areas of the tested material. IR microscopy is a technique that brings many advantages, mainly when it comes to examining samples with heterogeneous composition and surface. Thanks to it, it is possible not only to analyze small sample areas, but also to distinguish individual substances or groups of bonds present in them. During the test, the analyst can check both the homogeneity of the sample and the specific areas in which its composition changes. Due to this variety of applications, this technique is widely used in medicine, as well as in environmental research, forensics, and the research in the oil industry discussed in this article. The aim of the article is to present examples of the possibilities of applying the described technique in the work of an oil laboratory. It should be pointed out once again that this is of great importance, especially in FTIR microscopy when sampling heterogeneous samples, due to the possibility of selecting measurement point results for additional concentrations of organic compounds compared to areas with, for example, water. This makes it easier to determine whether a given substance or product is initially affecting the sediment or emulsion. Above all, IR microscopy allows a small amount of sample to be analyzed, which is particularly important when examining the collected substances in trace amounts.
Źródło:
Nafta-Gaz; 2021, 77, 9; 613-620
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis, spectroscopic and thermogravimetric interpretations of UO2(II), ZrO(II), Zr(IV), VO(II) and V(V) ciprofloxacin antibiotic drug complexes
Autorzy:
Albedair, Lamia A.
Powiązania:
https://bibliotekanauki.pl/articles/1849331.pdf
Data publikacji:
2021
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
ciprofloxacin
complexation
FTIR
Fourier transform infrared spectroscopy
diamagnetic
TEM
transmission electron microscopy
nanoscale
Opis:
New five ciprofloxacin (CIP) complexes of dioxouranium(II), oxozirconium(II), zirconium(IV), oxovanadium(II) and vanadium(IV) in the proportion 1:2 have been prepared using CIP as a drug chelate with UO2(NO3)2. 6H2O, ZrOCl2. 8H2O, ZrC4, VOSO4. xH2O and V2O5 respectively. The CIP complexes have been characterized based on the elemental analysis, molar conductance, magnetic, (FTIR & 1HNMR) spectral and thermal studies. The molar conductance studies of the synthesized complexes in DMSO solvent with concentration of 10–3 M indicate their non-electrolytic properties. At room temperature, the magnetic moment measurements revealed a diamagnetic behavior for all CIP prepared complexes. The different formulas of the new complexes can be represented as [UO2(CIP)2(NO3)2] (I), [VO(CIP)2(SO4)(H2O)] (II), [V2(O)(O2)2(CIP)2] (III), [Zr(O)(CIP)2(Cl)2] (IV), and [Zr(CIP)2(Cl)4] (V). The thermal analysis data of the complexes indicates the absence of coordinated water molecules except for vanadyl(II) complex (II). The CIP chelate is a uni-dentate ligand coordinated to the mentioned metal ion through terminal piperazinyl nitrogen. The transmission electron microscopy (TEM) investigation confirms the nano-structured form of the complexes.
Źródło:
Polish Journal of Chemical Technology; 2021, 23, 1; 45-52
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The method of determining the main harmonic frequency component
Metoda wyznaczania głównej składowej harmonicznej
Autorzy:
Szczepański, Tomasz
Traczyk, Stanisław
Dziedziak, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2033179.pdf
Data publikacji:
2021
Wydawca:
Instytut Transportu Samochodowego
Tematy:
fundamental harmonic frequency
Fourier transform
główna składowa harmoniczna
transformata Fouriera
Opis:
Analysis of vibroacoustic signals is one of the more frequently used diagnostic methods for mechanical devices occurring, among the others, in the car diagnostics. Often, it happens that the most important element of the recorded course is the fundamental harmonic frequency of vibrations. Fundamental frequency indicates the main process related to the operation of the device and allows to follow its course. In the article the author’s method of determining the fundamental frequency in the signal, being the subject of a patent application, will be presented. Its theoretical basis and application examples were discussed comparing the accuracy of its use with the accuracy of other methods. The frequency range where the method finds application is shown. That is, where its accuracy turns out to be better than the accuracy of popular methods used to determine fundamental harmonic frequency component.
Analiza sygnałów wibroakustycznych jest jedną z częściej stosowanych metod diagnostycznych urządzeń mechanicznych, występującą między innymi w diagnostyce samochodowej. Często zdarza się, że najbardziej istotnym elementem rejestrowanego przebiegu jest główna składowa harmoniczna drgań. Dominująca częstotliwość świadczy bowiem o głównym procesie związanym z pracą urządzenia i pozwala śledzić jego przebieg. W artykule zostanie przedstawiona autorska metoda wyznaczania głównej częstotliwości występującej w sygnale, będąca przedmiotem zgłoszenia patentowego. Omówiono jej podstawy teoretyczne oraz przykłady zastosowania, porównując dokładność jej stosowania z dokładnością innych metod. Wskazano na zakres częstotliwości, gdzie metoda znajduje zastosowanie, to znaczy gdzie jej dokładność okazuje się lepsza, niż dotychczas stosowanych sposobów wyznaczania głównej składowej harmonicznej.
Źródło:
Transport Samochodowy; 2021, 1; 38-42
1731-2795
Pojawia się w:
Transport Samochodowy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The method of obtaining the spectral characteristics of the scanning probe microscope
Sposób uzyskania charakterystyki widmowej sondy skanującej mikroskopu
Autorzy:
Kataieva, Mariia
Kvasnikov, Vladimir
Powiązania:
https://bibliotekanauki.pl/articles/2174702.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
nano-measurement
digital signal processing
scanning probe microscope
Fourier transform
nano-pomiar
cyfrowe przetwarzanie sygnału
mikroskop z sondą skanującą
transformata Fouriera
Opis:
The article discusses methods and algorithms for digital processing and filtering when carrying out nano-measurements using a scanning probe microscope. The paper discusses frequency methods for improving images, in particular, the use of the Fourier transforms with various filtering methods to improve the quality of the resulting image. Stable computational algorithms have been developed for transforming discrete signals based on the Fourier transform. Methods for the interpretation of the numerical results of the discrete Fourier transform in such packages as Matlab, MathCad, Matematica are presented. It is proposed to use a window transform, developed based on the Fourier transform, which makes it possible to single out the informative features of the signal and to reduce the influence of the destabilizing factors that arise when processing signals from a scanning gold microscope in real conditions.
W artykule omówiono metody i algorytmy cyfrowego przetwarzania i filtracji podczas nano-pomiarów z wykorzystaniem mikroskopu z sondą skanującą. Badane są metody korekcji częstotliwości obrazu, w szczególności wykorzystanie transformaty Fouriera z różnymi metodami filtracji w celu poprawy jakości otrzymanego obrazu. Opracowano stabilne algorytmy obliczeniowe do konwersji sygnałów dyskretnych na podstawie transformaty Fouriera. Przedstawiono metody interpretacji numerycznych wyników dyskretnej transformaty Fouriera w takich pakietach jak Matlab, MathCad, Matematica. Proponuje się zastosowanie transformacji okienkowej opracowanej na podstawie transformaty Fouriera, która pozwala wyodrębnić charakterystykę informacyjną sygnału i zmniejszyć wpływ czynników destabilizujących występujących podczas przetwarzania sygnału z mikroskopu z sondą skanującą w warunkach rzeczywistych.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2021, 11, 2; 52--55
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Time invariant property of weighted circular convolution and its application to continuous wavelet transform
Autorzy:
Yi, Hua
Ru, Yu-Le
Dai, Yin-Yun
Powiązania:
https://bibliotekanauki.pl/articles/2086853.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
continuous wavelet transform
linear convolution
weighted circular convolution
generalized discrete Fourier transform
ciągła transformata falkowa
splot liniowy
splot kołowy ważony
transformata Fouriera uogólniona dyskretna
Opis:
Time invariant linear operators are the building blocks of signal processing. Weighted circular convolution and signal processing framework in a generalized Fourier domain are introduced by Jorge Martinez. In this paper, we prove that under this new signal processing framework, weighted circular convolution also has a generalized time invariant property. We also give an application of this property to algorithm of continuous wavelet transform (CWT). Specifically, we have previously studied the algorithm of CWT based on generalized Fourier transform with parameter 1. In this paper, we prove that the parameter can take any complex number. Numerical experiments are presented to further demonstrate our analyses.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 4; e137726, 1--9
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies