Temat: FE analysis - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Finite element model for analysis of characteristics of shrouded rotor blade vibrations
Model elementów skończonych do analizy charakterystyk drgań łopat wirnika osłoniętego
Autorzy:: Zinkovskii, Anatoliy
Savchenko, Kyrylo
Onyshchenko, Yevheniia
Polishchuk, Leonid
Nazerke, Abilkaiyr
Zhumazhanov, Bagashar
Powiązania:: https://bibliotekanauki.pl/articles/2174719.pdf
Data publikacji:: 2022
Wydawca:: Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:: FE modeling
modal analysis
forced vibration analysis
shrouded blade
nonlinear vibrations
modelowanie MES
analiza modalna
analiza drgań wymuszonych
łopata osłonięta
drgania nieliniowe
Opis:: The paper presents the approaches to FE modelling of blade airfoil, contact between the shrouds and operational damage. The regularities are established concerning the influence of the finite element type, finite element mesh and model of contact interaction on the spectrum of natural frequencies of blade assemblies. The use of the developed computational models is substantiated to determine the forced vibration characteristics of the selected objects of investigation. Based on the performed numerical experiments it was substantiated of finite element model selection for analysis of characteristics of shrouded rotor blade vibrations.
W artykule przedstawiono podejścia do modelowania elementów skończonych płata łopaty, styku osłon oraz uszkodzeń eksploatacyjnych. Ustalono prawidłowości dotyczące wpływu typu elementu skończonego, siatki elementów skończonych oraz modelu interakcji stykowej na widmo częstotliwości drgań własnych zespołów łopatek. Uzasadnione jest wykorzystanie opracowanych modeli obliczeniowych do wyznaczania charakterystyk drgań wymuszonych wybranych obiektów badań. Na podstawie przeprowadzonych eksperymentów numerycznych uzasadniono wybór modelu elementów skończonych do analizy charakterystyk drgań osłoniętych łopat wirnika.
Źródło:: Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2022, 12, 4; 11--16
2083-0157
2391-6761
Pojawia się w:: Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Bone Remodelling Model Incorporating Both Shape and Internal Structure Changes by Three Different Reconstruction Mechanisms. A Lumbar Spine Case
Model przebudowy kości uwzględniający zmiany struktury i kształtu spowodowane trzema różnymi mechanizmami przebudowy. Przypadek kręgosłupa lędźwiowego
Autorzy:: Wymysłowski, P.
Zagrajek, T.
Powiązania:: https://bibliotekanauki.pl/articles/140072.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: bone remodelling
artificial disc
lumbar spine
FE analysis
model przebudowy kości
sztuczny krążek międzykręgowy
kręgosłup lędźwiowy
analiza MES
Opis:: The paper presents a method of analysis of bone remodelling in the vicinity of implants. The authors aimed at building a model and numerical procedures which may be used as a tool in the prosthesis design process. The model proposed by the authors is based on the theory of adaptive elasticity and the lazy zone concept. It takes into consideration not only changes of the internal structure of the tissue (described by apparent density) but also surface remodelling and changes caused by the effects revealing some features of “creep”. Finite element analysis of a lumbar spinal segment with an artificial intervertebral disc was performed by means of the Ansys system with custom APDL code. The algorithms were in two variants: the so-called site-independent and site-specific. Resultant density distribution and modified shape of the vertebra are compared for both of them. It is shown that this two approaches predict the bone remodelling in different ways. A comparison with available clinical outcomes is also presented and similarities to the numerical results are pointed out.
Artykuł prezentuje metodę analizy przebudowy kości w otoczeniu implantów. Celem pracy było opracowanie modelu i procedur numerycznych mogących służyć jako narzędzie wspomagające projektowanie protez. Zaproponowany przez autorów model opiera się na teorii adaptacyjnej sprężystości i koncepcji strefy martwej. Uwzględnia on nie tylko zmiany struktury wewnętrznej tkanki (opisanej przez gęstość pozorną), ale także przebudowę powierzchniową i zmiany związane z efektami wykazującymi pewne cechy “pełzania”. Przeprowadzona została analiza metodą elementów skończonych segmentu ruchowego kręgosłupa ze sztucznym krążkiem międzykręgowym z wykorzystaniem systemu Ansys i własnego kodu APDL. Algorytmy zbudowano w dwóch wariantach: tzw. niezależnym i zależnym od miejsca. Porównano uzyskane rozkłady gęstości i zmiany kształtu pokazując, że obydwa warianty przebudowę kości przewidują w różny sposób. Zaprezentowano również porównanie wyników numerycznych z badaniami klinicznymi wskazując na ich podobieństwa.
Źródło:: Archive of Mechanical Engineering; 2016, LXIII, 4; 549-563
0004-0738
Pojawia się w:: Archive of Mechanical Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Badania maszyny elektrycznej z zagnieżdżonymi magnesami trwałymi i barierami magnetycznymi
Research of electrical machine with embedded permanent magnets and flux barriers
Autorzy:: Wardach, M.
Pałka, P.
Paplicki, P.
Bonisławski, M.
Grochocki, P.
Powiązania:: https://bibliotekanauki.pl/articles/1199460.pdf
Data publikacji:: 2017
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:: maszyny elektryczne
magnesy trwałe
badania symulacyjne
badania eksperymentalne
pojazd elektryczny
electrical machines
permanent magnets
FE analysis
experimental research
electric vehicle
Opis:: The paper presents an electric machine prototype with embedded permanent magnets and magnetic barriers for electric vehicle drive. Selected experimental results compared with simulation results carried out by using Ansys Maxwell have also been presented. Individual stages of design and construction of the proposed machine have been reported. The aim of the work was to build and to test the prototype of electric machine with permanent magnet dedicated to the electric vehicle drive. The machine should have a high ratio of inductances in the q-axis to the d-axis, low values of cogging torque and low torque ripples. On the basis of simulation study, carried out for different topologies, the selection of the rotor structure with the favorite magnetic parameters has been done. A prototype machine was built based on the stator and housing from 6.3 kW induction motor M3AA 132 MC 8 series.
W pracy przedstawiono prototypową maszynę elektryczną z zagnieżdżonymi magnesami trwałymi oraz barierami magnetycznymi, dedykowaną do napędu pojazdu elektrycznego. W artykule zamieszczono wybrane wyniki badań symulacyjnych prototypu, otrzymane przy użyciu programu Ansys Maxwell, a także rezultaty badań eksperymentalnych przeprowadzone na modelu fizycznym. Zaprezentowane zostały poszczególne etapy prac projektowych i konstrukcyjnych opracowanej maszyny. Celem pracy było wykonanie i zbadanie prototypu maszyny elektrycznej z magnesami trwałymi dedykowanej do napędu pojazdu elektrycznego o wysokim stosunku indukcyjności w osi q do indukcyjności w osi d, niskiej wartości momentu zaczepowego i pulsacji. Na podstawie przeprowadzonych badań symulacyjnych różnych topologii, dokonano wyboru struktury wirnika o pożądanych parametrach magnetycznych. Model eksperymentalny zbudowano na bazie stojana i obudowy seryjnego silnika asynchronicznego M3AA 132 MC 8 o mocy 6,3 kW.
Źródło:: Maszyny Elektryczne: zeszyty problemowe; 2017, 2, 114; 135-140
0239-3646
2084-5618
Pojawia się w:: Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Numerically predicted J-integral as a measure of crack driving force for steels 1.7147 and 1.4762
Autorzy:: Vukelic, G.
Brnic, J.
Powiązania:: https://bibliotekanauki.pl/articles/281147.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: crack
steel 1.7147
steel 1.4762
FE analysis
Opis:: Fracture behavior of two types of steel (1.4762 and 1.7147) is compared based on their numerically obtained J-integral values. The J-integral are chosen to quantify the crack driving force using the finite element (FE) stress analysis applied to single-edge notched bend (SENB) and compact tensile (CT) type fracture specimens. The resulting J-values are plotted for growing crack length (∆a – crack length extension) at different a/W ratios (a/W – relative crack length; 0.25, 0.5, 0.75). Slightly higher resulting values of the J-integral for 1.4762 than 1.7147 can be noticed. Also, higher a/W ratios correspond to lower J-integral values of the materials and vice versa. J-integral values obtained by using the FE model of the CT specimen give somewhat conservative results when compared with those obtained by the FE model of the SENB specimen.
Źródło:: Journal of Theoretical and Applied Mechanics; 2017, 55, 2; 659-666
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: CI engine as a case study of thermomechanical FE analysis of the piston - piston rings - cylinder system
Autorzy:: Szurgott, P.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/247997.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine piston
composite piston
thermomechanical analysis
FE analysis
Opis:: The compression-ignition engine as a case study of a methodology of the numerical modelling and simulation of the piston - piston rings - cylinder system was presented in the paper. Thermomechanical FE analysis, taking into account thermal and mechanical loads, was carried out using the MSC.Marc/Mentat software. The mechanical loads included loads due to inertial and gas forces as well. A three dimensional solid geometrical model of the considered set was developed using AutoCAD software, whereas the finite element mesh was generated using Altair HyperMesh. Kinematic boundary conditions - the vertical displacement and acceleration of the piston - were described by the corresponding curves as a function of time for selected engine speed. Changes in pressure on the piston crown were estimated based on data from the engine manufacturer and the corresponded indicator diagram available in the literature. The results of thermomechanical FE analysis were presented in the form of stress and/or displacement contours. The main aim of the analysis was to determine the deformation of the piston depending of on the piston material. Two types of material were compared - the actual one PA12 aluminum alloy and the new composite material with low hysteresis. The second material was characterized by slight differences of the coefficient of thermal expansion for heating and cooling.
Źródło:: Journal of KONES; 2012, 19, 1; 399-406
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Thermomechanical FE analysis of the engine piston made of composite material with low histeresis
Autorzy:: Szurgott, P.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/244407.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine piston
composite piston
coefficient of thermal expansion
thermal analysis
FE analysis
Opis:: The main purpose of the preliminary analyses presented in the paper was to compare the behaviour of the combustion engine piston made of different type of materials under thermal load. A thermomechanical FE analysis of the engine piston made of composite material was shown. A selected engine is installed in one of the popular polish tanks. The proposed new material is characterized by a low hysteresis – the differences of the coefficient of thermal expansion for heating and cooling are not significant. The results obtained for the piston made of a new material were compared with those for the current standard material. The piston was loaded by a temperature field inside it. Appropriate averaged thermal boundary conditions such as temperatures and heat fluxes were set on different surfaces of the FE model. FE analyses were carried out using MSC.Marc software. Development of the FE model was also presented. Geometrical CAD model of the piston was developed based on the actual engine piston, which was scanned using a 3D laser scanner. A cloud of points obtained from the scanner was processed and converted into a 3- dimensional solid model. FE model of a quarter part of the piston was developed for the preliminary analysis presented in the paper. 4-node tetrahedron finite elements were applied since there was no axial symmetry of the considered object. The temperature field inside the piston was determined and presented in the form of contour bands. Contours of displacement and stress in a radial direction were shown as well.
Źródło:: Journal of KONES; 2011, 18, 1; 645-650
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Pullout capacity of cylindrical block embedded in sand
Autorzy:: Sternik, K.
Dołżyk-Szypcio, K.
Powiązania:: https://bibliotekanauki.pl/articles/178630.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: block anchors
pullout capacity
FE analysis
plastic limit analysis
Opis:: Calculation of pullout capacity of anchoring concrete cylindrical block by finite element method is carried out. 3D model of the block assumes its free rotation. Alternative solutions with one and two pulling forces attached at different heights of the block are considered. Dependency of the ultimate pulling force on the points of its application, the block’s embedment depth as well as contact friction are investigated. Results of FE analysis and simple engineering estimations are compared. The maximum pullout resistance results from FE analysis when the rotation of the block is prevented.
Źródło:: Studia Geotechnica et Mechanica; 2018, 40, 1; 30-37
0137-6365
2083-831X
Pojawia się w:: Studia Geotechnica et Mechanica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Strength testing of side connector of railway wagon for semitrailers transport
Autorzy:: Stankiewicz, M.
Krasoń, W.
Powiązania:: https://bibliotekanauki.pl/articles/245060.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: intermodal railway wagon
strength test
FE analysis of the side connector (lock)
Opis:: A prototype railway wagon with a rotatable platform for an intermodal system is developed in Military University of Technology. The special railway wagon is equipped with a rotatable low flat loading floor. It can be used for transporting various types of vehicles, for example, tractors, trucks, trailers, semitrailers, cargo containers. The special wagons allows quick and convenient self-loading and unloading of vehicles and containers (no cranes needed); no platform infrastructure is required, only hardened flat surface; there is no need for hubs, terminals or special logistics; each wagon can be operated separately. A considered wagon consists of the following elements: chassis with biaxial standard Y25 bogies, frame, platform body, pneumatic systems, buffer devices, other external devices, electric equipment and hydraulic systems. A mechanism blocking rotation of a rotatable platform during transport of the load (typical semitrailers) is very important from a functionality and strength point of view of the considered wagon. Construction of such a lock allows only transmission of longitudinal load. Based on the performed FE analysis and strength tests of the wagon, it was verified that the most strenuous component of the wagon with a rotatable loading platform is a connector (lock) coupling the side of the rotatable platform with the over bogie part of the frame wagon. The selected aspects of numerical and experimental studies of the prototype railway wagon and its components are presented in the paper. FE analyses of the side lock element separated from the wagon structure are discussed as well.
Źródło:: Journal of KONES; 2016, 23, 2; 349-356
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: CO2 laser spot welding of thin sheets AISI 321 austenitic stainless steel
Autorzy:: Shehab, A. A.
Nawi, S. A.
Al-Rubaiy, A. AAG
Hammoudi, Z.
Hafedh, S. A.
Abass, M. H.
Alali, M. S.
Ali, S. D.
Powiązania:: https://bibliotekanauki.pl/articles/1818484.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: thin sheet metal
austenitic stainless steel
CO2 CW LSW
mechanical properties
welding profile
FE analysis
blachy cienkie
stal austenityczna nierdzewna
właściwości mechaniczne
profil spawalniczy
analiza elementów skończonych
Opis:: Purpose: The present work aims to investigate the influence of CO2 laser spot welding (LSW) parameters on welding profile and mechanical properties of lap joint of AISI 321 thin sheet metals, and analyze the welding profile numerically by finite element (FE) method. Design/methodology/approach: The weld carried out using 150 W CO2 continues wave laser system. The impact of exposure time and laser power on the welding profile was investigated using an optical microscope. Microhardness and tensile strength tests were used to evaluate the mechanical properties of the joint. Ansys software was utilized to simulate the welding profile numerically. Findings: The results revealed that 2 s exposure time and 50 W power have led to uniform welding profile and highest shear force (340 N), lower hardness gradient across the heat affected zone (HAZ) and fusion zone (FZ). Finite element (FE) analysis of the welding profile showed good agreement with experimental analysis. Research limitations/implications: The selection of laser spot welding parameters for thin sheet metal was critical due to the probability of metal vaporisation with extra heat input during welding. Practical implications: Laser welding of AISI 321 steel is used in multiple industrial sectors such as power plants, petroleum refinement stations, pharmaceutical industry, and households. Thus, selecting the best welding parameters ensures high-quality joint. Originality/value: The use of CO2 laser in continuous wave (CW) mode instead of pulse mode for spot welding of thin sheet metal of AISI 321 austenitic stainless steel consider a real challenge because of the difficulty of control the heat input via proper selection of the welding parameters in order to not burn the processed target. Besides, the maintenance is easier and operation cost is lower in continuous CO2 than pulse mode.
Źródło:: Archives of Materials Science and Engineering; 2020, 106, 2; 68--77
1897-2764
Pojawia się w:: Archives of Materials Science and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Simplified computation methodology for contact forces on tapered rolling bearing with flexible parts
Autorzy:: Sapietová, A.
Novák, P.
Šulka, P.
Sapieta, M.
Jakubovičová, L.
Powiązania:: https://bibliotekanauki.pl/articles/196269.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:: contact force
cone bearing
ANSYS
FE analysis
siła styczna
łożysko stożkowe
Opis:: Durability calculations of bearings take in account the distribution of forces on rollers. Calculation of these forces in flexibly supported rings is the aim of the paper. We use simplified finite element (FE) models of bearings, which are integrated into the external geometry. This approach can consider the stiffness of the surrounding structure as well as the clearance of the bearing rings, the misalignment of bearings, shaft deflections, and the forces of crowning rollers. The presented results show an influence of the initial radial interference of the outer ring with housing on the distribution of forces in bearing rollers. As the radial stiffness of the housing is close to the stiffness of the outer ring interference, this causes considerable deformation of the housing. The presented approach is also able to calculate the distribution of contact pressures over any rolling element.
Źródło:: Zeszyty Naukowe. Transport / Politechnika Śląska; 2018, 99; 177-182
0209-3324
2450-1549
Pojawia się w:: Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Optimal selection of dental implant for different bone conditions based on the mechanical response
Autorzy:: Roy, S.
Das, M.
Chakraborty, P.
Biswas, J. K.
Chatterjee, S.
Khutia, N.
Saha, S.
Roychowdhury, A.
Powiązania:: https://bibliotekanauki.pl/articles/307549.pdf
Data publikacji:: 2017
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: wytrzymałość kości
implanty stomatologiczne
analiza FEM
pacjent
bone condition
porous dental implant
FE Analysis
patient specific
Opis:: Bone quality varies from one patient to another extensively; also, Young’s modulus may deviate up to 40% of normal bone quality, which results into alteration of bone stiffness immensely. The prime goal of this study is to design the optimum dental implant considering the mechanical response at bone implant interfaces for a patient with specific bone quality. Method. 3D model of mandible and natural molar tooth were prepared from CT scan data while, dental implants were modelled using different diameter, length and porosity and FE analysis was carried out. Based on the variation in bone density, five different bone qualities were considered. First, failure analysis of implants, under maximum biting force of 250N had been performed; next, the implants, those survived were selected for observing the mechanical response at bone implant interfaces under common chewing load of 120N. Result. Maximum Von Mises stress did not surpass the yield strength of the implant material (TiAl4V). However, factor of safety of 1.5 was considered and all but two dental implants survived the design stress or allowable stress. Under 120N load, distribution of Von Mises stress and strain at the bone-implant interface corresponding to the rest of the implants for five bone conditions were obtained and enlisted. Conclusion. Implants, exhibiting interface strain within 1500-3000 microstrain range show the best bone remodelling and osseointegration. So, implant models, having this range of interface strains were selected corresponding to the particular bone quality. A set of optimum dental implants for each of the bone qualities were predicted.
Źródło:: Acta of Bioengineering and Biomechanics; 2017, 19, 2; 11-20
1509-409X
2450-6303
Pojawia się w:: Acta of Bioengineering and Biomechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Vertical vibrations of composite bridge/track structure/high-speed train systems. Part 1: Series-of-types of steel-concrete bridges
Autorzy:: Podworna, M.
Klasztorny, M.
Powiązania:: https://bibliotekanauki.pl/articles/202151.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: composite steel-concrete bridge
ballasted track structure
high-speed train
design
FE modelling
simulation
forced resonances
numerical analysis
Opis:: A new series-of-types of single-span simply-supported railway composite (steel-concrete) bridges, with a symmetric platform, has been designed according to the Polish bridge standards. The designed bridges/viaducts are located on the main railways of the classification coefficient k = +2. A ballasted track structure adapted to high operating speeds has also been designed. The ultimate limit states and the limit states corresponding to the bridges undertaken are collected and discussed. The bridges have been designed in accordance with contemporary art engineering, with geometric and material optimization, avoiding overdesign. A new methodology of numerical modelling and simulation of dynamic processes in composite bridge/ballasted track structure/high speed train systems, developed in Part 2 and Part 3, has been applied and implemented in a problem-oriented computer programme. A new approach to predicting forced resonances in those systems is formulated and tested numerically. It has been proved that in the case of typical structural solutions of bridges and ballasted track structures, it is necessary to introduce certain limitations for operating speeds of trains.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 1; 165-179
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Numerical analysis of friction influence on the transverse welding phenomenon in the forward extrusion process
Autorzy:: Piwnik, J.
Mogielnicki, K.
Kuprianowicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/279515.pdf
Data publikacji:: 2014
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: extrusion
welding criteria
FE analysis
Opis:: There is often a need to join billets being extruded in the forward extrusion processes in order to preserve the continuity of manufacturing of products. The primary problem connected with joining while extruding is to ensure the required state of stress, deformation and temperature assuring a good weld quality. The paper contains numerical analyses of the transverse joining processes of billets in the course of forward extruding. The impact of the friction between welded objects on the material flow in vicinity of the joints is analyzed. A numerical method for determination of the weld length at the longitudinal section, by assuming the homogeneity of the strain rate at both sides of the joined elements contact line, is proposed. Three cases of the forward extruding are analyzed. Two friction shear factors equal to m = 0.4 and m = 0.9 at the billets interface are modelled for each case and weld the lengths at the longitudinal sections are presented. In addition, distributions of the flowing material velocities and effective strains in the weld vicinity are added for all tested processes.
Źródło:: Journal of Theoretical and Applied Mechanics; 2014, 52, 2; 547-555
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Model of Cu-Al-Fe-Ni bronze crystallization
Autorzy:: Pisarek, B. P.
Powiązania:: https://bibliotekanauki.pl/articles/383278.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: theoretical basis
foundry proces
thermal analysis
derivative analysis
microstructure
Cu-Al-Fe-Ni bronze
model of crystallization
podstawy teoretyczne
proces odlewniczy
analiza termiczna
analiza derywacyjna
mikrostruktura
brąz Cu-Al-Fe-Ni
model krystalizacji
Opis:: According to the analysis of the current state of the knowledge shows that there is little information on the process of phase transformations that occur during the cooling Cu-Al-Fe-Ni hypo-eutectoid bronzes with additions of Cr, Mo and/or W, made additions individually or together, for the determination of: the type of crystallizing phases, crystallizing phases, order and place of their nucleation. On the basis of recorded using thermal and derivative analysis of thermal effects phases crystallization or their systems, analysis of the microstructure formed during crystallization - observed on the metallographic specimen casting ATD10-PŁ probe, analysis of the existing phase equilibrium diagrams forming elements tested Cu-Al-Fe-Ni bronze, with additions of Cr, Mo, W and/or Si developed an original model of crystallization and phase transformation in the solid state, the casting of high quality Cu-Al-Fe-Ni bronze comprising: crystallizing type phase, crystallizing phase sequence, place of nucleation.
Źródło:: Archives of Foundry Engineering; 2013, 13, 3; 72-79
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Quality of automotive sand casting with different wall thickness from progressive secondary alloy
Autorzy:: Pastierovičová, Lucia
Kuchariková, Lenka
Tillová, Eva
Chalupová, Mária
Pastirčák, Richard
Powiązania:: https://bibliotekanauki.pl/articles/26078793.pdf
Data publikacji:: 2022
Wydawca:: Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:: jakość odlewów
wtórny stop aluminium
grubość ściany
analiza ilościowa
wyższa zawartość Fe
quality of castings
secondary aluminium alloy
wall thickness
quantitative analysis
higher Fe content
Opis:: This paperwork is focused on the quality of AlSi6Cu4 casting with different wall thicknesses cast into the metal mold. Investigated are structural changes (the morphology, size, and distribution of structural components). The quantitative analysis is used to numerically evaluate the size and area fraction of structural parameters (α-phase, eutectic Si, intermetallic phases) between delivered experimental material and cast with different wall thicknesses. Additionally, the Brinell hardness is performed to obtain the mechanical property benefits of the thin-walled alloys. This research leads to the conclusion, that the AlSi6Cu4 alloy from metal mold has finer structural components, especially in small wall thicknesses, and thus has better mechanical properties (Brinell hardness). These secondary Al-castings have a high potential for use in the automotive industry, due to the thin thicknesses and thus lightweight of the construction.
Źródło:: Production Engineering Archives; 2022, 28, 2; 172--177
2353-5156
2353-7779
Pojawia się w:: Production Engineering Archives
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "FE analysis" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język