Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Exhaust Gas Recirculation" wg kryterium: Temat


Tytuł:
Comparative analysis of the heat balance results of the selected Tier III-compliant gas-fuelled two-stroke main engines
Autorzy:
Korlak, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/24202453.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
heat balance
two-stroke engine
LNG
liquified natural gas
SCR
selective catalytic reduction
EGR
exhaust gas recirculation
bilans cieplny
silnik dwusuwowy
skroplony gaz ziemny
selektywna redukcja katalityczna
recyrkulacja spalin
Opis:
Two-stroke engines are distinguished by the highest overall efficiency among all main engines. This is not only due to the low speed, and large piston stroke, but also to the high combustion temperature, which results in an increase in nitrogen oxides (NOx) emission. Technical solutions applied to bring main engines into compliance with current NOx emission standards set by the Tier III limits include the use of SCR and EGR systems, the implementation of the Otto cycle, and the application of liquified natural gas (LNG) as the low-emission fuel. Impact of the available Tier III-compliant technologies on the heat balance results is analysed using the example of the currently most popular dual-fuel main engines, i.e. WinGD X92DF and MAN G95ME-C10.5-GI. The possibilities of waste heat recovery in the electricity generation process and thereby improving the ship energy efficiency are discussed.
Źródło:
Combustion Engines; 2023, 62, 2; 24--28
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of internal flue gas recirculation system applied to methane-hydrogen powered gas microturbine combustor
Autorzy:
Fąfara, Jean-Marc
Modliński, Norbert
Powiązania:
https://bibliotekanauki.pl/articles/24202441.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
gas microturbine
combustor
power-to-gas
hydrogen
exhaust gas recirculation
mikroturbiny gazowe
komora spalania
wodór
recyrkulacja spalin
Opis:
Sources of renewable energy have been increasingly used all over the world. This kind of energy is highly desirable because of its unlimited availability. Unfortunately, renewable energy production very much depends on weather conditions. Consequently, it is necessary to store the produced excess energy in order to use it when needed. There is a technology able to produce a hydrogen/methane fuel from excess renewable energy, which may be stored. This technology is called the Power-to-Gas technology (P2G). Since the efficiency of this technological process depends on the hydrogen fraction in the renewable energy fuel, there is a need to increase this fraction. Concurrently, the gas microturbine technology is increasingly widely used in various industries (aviation, energy, automotive, military, etc). The P2G technology and the gas microturbine technology are likely to be integrated in the near future and, as mentioned above, the hydrogen fraction in the methane-hydrogen fuel will tend to increase. In order to power a gas microturbine with the methane-hydrogen fuel, it will be necessary to modify the combustor to avoid an excessive temperature increase and flashbacks. In this paper it is proposed to apply an autonomous internal exhaust gas recirculation system to resolve the hydrogen combustion problems indicated above. The operating principle and the proposed design of the recirculation system and the latter’s impact on the combustor’s operating parameters and emissivity (NOx and CO) are presented.
Źródło:
Combustion Engines; 2023, 62, 1; 63--77
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigation of the internal flue gas recirculation system applied to methane powered gas microturbine combustor
Autorzy:
Fąfara, Jean-Marc
Modliński, Norbert
Powiązania:
https://bibliotekanauki.pl/articles/2097605.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
gas microturbine
exhaust gas recirculation
combustion chamber
CO emission
NOx emission
mikroturbina gazowa
recyrkulacja spalin
komora spalania
emisja CO
emisja NOx
Opis:
The gas microturbines gain significance in various industry sectors. One of their most crucial advantages is the capability of utilizing variety of fuels. At the same time, the emissions regulations become increasingly strict. This is why there is a need to look for a new technological solution to limit the emissions of selected substances, like carbon monoxide (CO) and nitrogen oxides (NOx). The internal recirculation of the flue gases is well known to limit the temperature peak and for the homogenization of the temperature field gradient in different combustion chambers. This paper presents a numerical investigation of a novel internal flue gas recirculation system applied to gas microturbine combustors. The ability to perform an internal exhaust gases recirculation by adding a combustor internal pipe system was verified numerically. This paper exposed the numerical investigation methods and obtained results. The study presents the concept and results performed on three cases of internal exhaust gases recirculation systems applied to a reference combustor. The work permitted to demonstrate numerically that it is possible to perform an autonomous exhaust gases recirculation inside gas micro-turbine combustor at a maximum global rate of 0.51%, and that the recirculation system has an impact on the combustion processes without specially modifying the combustor work parameters.
Źródło:
Combustion Engines; 2021, 60, 4; 21--29
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multiple symptomical analysis of fails in the EGR system of HDI engine
Autorzy:
Cieślikowski, Bogusław
Cygnar, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/133797.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
EGR
exhaust gas recirculation valve
fluorescence
IR
infrared spectroscopy
biocomponents
zawór recyrkulacji spalin
fluorescencja
spektroskopia w podczerwieni
biokomponent
Opis:
The article presents the process of fault location in the HDR-rhr engine EGR system based on the characteristics obtained in the conditions of traction measurements using the ESI Tronic 2.0 program. The measurements were obtained using the licensed BOSCH KTS540 diagnostic tester. In the process of diagnostic inference the PWM signal coefficient has been analyzed in relation to the level of boost pressure, mass variability and air temperature in the intake system (based on MAF data) and EGR valve positioning for variable angular positions of the accelerator pedal. Analysis of the characteristics allowed for proper identification of faults previously stored in the system with OBDII error codes. Attention was paid to the issue of sediment formation in the EGR valve channels as a result of using diesel oil with the participation of biocomponents. Sludge analysis was carried out in a certified laboratory using infrared spectroscopy methods. Conclusions have been drawn for the presence of non-oxidized components of organic origin precipitated in the channels of the EGR system.
Źródło:
Combustion Engines; 2019, 58, 4; 47-51
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the impact of degree of recirculation of exhaust gases and energy fraction of gaseous fuel on overall efficiency and basic parameters of combustion process of dual-fuel diesel (self-ignition) engine fed by natural gas
Analiza wpływu stopnia recyrkulacji spalin oraz udziału energetycznego paliwa gazowego na sprawność ogólną i podstawowe parametry procesu spalania dwupaliwowego silnika o ZS zasilanego gazem ziemnym
Autorzy:
Różycki, A.
Skrzek, T.
Powiązania:
https://bibliotekanauki.pl/articles/1363334.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
dual-fuel
self-ignition
natural gas
recirculation of exhaust gases
overall efficiency
silnik dwupaliwowy
zapłon samoczynny
gaz ziemny
recyrkulacja spalin
sprawność ogólna
Opis:
In the Internal - Combustion Engines and Vehicles Division of the Humanistic-Technological University named after Kazimierz Pułaski in Radom there have been carried out research for many years on self-ignition dual-fuel engine with using different substitute fuels of low value of cetane number. Previous research showed possibilities of using considerable energy fractions of gaseous fuel [1, 8, and 9]. In the present paper there are presented selected results of research concerning utilization of natural gas. During execution of examinations it was observed that together with the change in energy fraction of gaseous fuel and change of degree of recirculation of exhaust gases the change of overall efficiency of engine as well as the change of parameters of combustion process takes place. In this paper there was made an attempt of evaluating the impact of application of different fractions of gaseous fuel and the degree of recirculation of exhaust gases on the parameters of combustion process. There was also made an attempt to clarify causes of the changes in values of overall efficiency as a result of observed changes in the course of combustion.
W Zakładzie Pojazdów i Silników Spalinowych Uniwersytetu Technologiczno-Humanistycznego im. Kazimierza Pułaskiego w Radomiu od szereg lat są prowadzone badania dwupaliwowego silnika o zapłonie samoczynnym z wykorzystaniem różnych paliw zastępczych o małej wartości liczby cetanowej. Dotychczasowe badania wykazały możliwości stosowania znacznych udziałów energetycznych paliwa gazowego [1, 8, 9]. W niniejszym artykule zaprezentowano wybrane wyniki badań dotyczących wykorzystania gazu ziemnego. W trakcie badań zaobserwowano że wraz ze zmianą udziału energetycznego paliwa gazowego oraz zmianą stopnia recyrkulacji spalin zmianie ulega sprawność ogólna silnika a także parametry procesu spalania. W artykule podjęto próbę oceny wpływu stosowania różnych udziałów paliwa gazowego oraz stopnia recyrkulacji spalin na parametry procesu spalania. Podjęto także próbę wyjaśnienia przyczyn zmian wartości sprawności ogólnej w wyniku zaobserwowanych zmian przebiegu spalania.
Źródło:
Archiwum Motoryzacji; 2018, 79, 1; 65-77
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solving the problem of air quality in Indian cities by retrofitting the EGR
Autorzy:
Sroka, Z. J.
Walkowiak, W.
Reksa, M.
Kolanek, C.
Pillai, C. V.
Powiązania:
https://bibliotekanauki.pl/articles/132981.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
engine pollution
retrofitting
Exhaust Gas Recirculation
EGR
zanieczyszczenia silnika
modernizacja
recyrkulacja spalin
Opis:
This paper touches problem of transportation pollution focusing on NOx reducing in the India. There were India country chosen for study as the second populated country and most polluted cities in the world. As from statistics, it is known that more than 65% of Indian cars are old and they are the main reason of air pollution. Most of the old cars do not have any control measures for eliminating deadliest gases. Dumping the old cars is not possible, as the poor owns most of the old cars. For eliminating the pollution from old cars, the possible remedy is to control the emission of pollutants. Comparing to all gases in exhaust, nitrogen oxides are the dangerous one. It can may cause up to death. The best method to control the NOx gas is EGR (Exhaust Gas Recirculation) valves. This research mainly focuses on the possible ways of installing EGR in old engines and fabricate an EGR in one of the Indian cars. Maruti Suzuki 800 is best of for fabricating EGR, as it is a base model and most sold Indian car. As the result, there tremendous decreasing in NOx emission also the emission CO2 was reduced. The investigation about fabricating EGR in old vehicle results a positive output after calculated the cost of the fabrication, time consumption, work challenges and other facts. As Indian government adopt this concept, they can reduce the pollution from all types of vehicles to a great extend in few years of time with low investment.
Źródło:
Combustion Engines; 2018, 57, 2; 61-66
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the possibilities to achieve adiabatization process of combustion surrounded by inactive gases in Rapid Compression Machine
Autorzy:
Cieślik, W.
Pielecha, I.
Powiązania:
https://bibliotekanauki.pl/articles/134132.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust gas recirculation
inactive gases
combustion fuels
recyrkulacja spalin
nieaktywne gazy
spalanie paliw
Opis:
In this work non-combustible gases impact on combustion processes studies is performed. Research was performed in a optically accessible rapid compression machine (RCM) under spark ignition engine conditions. The distribution of the swirl charge in the relation to adopted for analysis sequence of gas delivery to the chamber was varied with regard to the main injection. Authors investigate the influence of these sequence on the combustion and the ignition delay of the main injection and the overall combustion characteristics. The aim of this work is the experimental recognition of possibilities of creating combustible mixtures of light hydrocarbon fuels surrounded by non-combustible gases affecting the function of the inhibitor. Specifying the ability of preparation and combustion of mixtures in such systems enables the scientifl analysis of adiabatization of the combustion process of fuel-air mixtures in the operating chambers. Theoretical analysis of the issues indicates possibility of obtaining such a stratification of the charge, that the inactive exhaust gases creating the outer ring surround the combustible mixture inside in such a way as to reduce the amount of heat exchanged between the working medium and the walls of the cylinder.
Źródło:
Combustion Engines; 2017, 56, 1; 27-31
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dedicated exhaust gas recirculation in spark ignition engines
Autorzy:
Rehan, S.
Powiązania:
https://bibliotekanauki.pl/articles/103305.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
exhaust gas recirculation
NOx emissions
spark ignition engines
Opis:
The impact of high levels of exhaust gas recirculation (EGR) has been well documented to decrease fuel consumption and reduce emissions of spark ignition engines. But there are also many limitations associated with this technology like EGR control and tolerance, which can reduce the potential efficiency improvements. A new concept called D-EGR has been presented in which the exhaust from a sub group of power cylinders is channeled back to the intake of all the cylinders. In this literature review both experimental and numerical analysis of this technology is shown. In the former case experiments were performed on 2.0 L PFI engine with gasoline as a fuel in part and high load conditions and the results show that at part loads the D-EGR engine can lead to lower Brake Specific Fuel Consumption, lower HC and CO emissions and higher brake thermal efficiency. At high load operations the results show improved combustion stability and superior knock tolerance. In the numerical studies it shows comparable thermal efficiency with conventional spark ignition (SI) engines and reduction in NOX emissions.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 2; 44-50
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of EGR control at in-cylinder pressure and ecological properties of CI off-road vehicle engine
Autorzy:
Bieniek, A.
Mamala, J.
Graba, M.
Hennek, K.
Powiązania:
https://bibliotekanauki.pl/articles/133493.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust gas recirculation
in-cylinder pressure
mass fraction burning
differential pressure
nitrogen oxides
NOx
particulate matter
PM
recyrkulacja spalin
ciśnienie w cylindrze
spalanie frakcji masowej
różnica ciśnień
tlenki azotu
cząstki stałe
Opis:
An attempt has been made to clarify the effect of wide-ranging control of the exhaust gas recirculation system on the cylinder pressure and ecological engine performance. This publication contains the results of tests performed on the CI (compression ignition) engine of the off-road vehicle mounted on the test bench. The study was based on advanced EGR control with a proportional valve and a very efficient exhaust gases cooling system. Analysis of the test results is based on the cylinder pressure and the concentration of NOx and PM components at exhaust gases. The study included the influence of the exhaust gas recirculation system control on parameters such as differential pressure, MBF, and relative NOx and PM emissions. As demonstrated by the analysis conducted, the EGR valve control method and the exhaust gas cooling intensity significantly affect the cylinder pressure and its ecological performance.
Źródło:
Combustion Engines; 2017, 56, 3; 88-95
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of non-cooled exhaust gas recirculation on the diesel engine parameters
Autorzy:
Cisek, J.
Powiązania:
https://bibliotekanauki.pl/articles/134037.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust gases
EGR
exhaust gas recirculation
silnik spalinowy
spaliny
recyrkulacja spalin
Opis:
This paper presents the results of the diesel engine research on the energy performance, components of exhaust gases and smoke and parameters related to the supply system for VW 1.9 TDI working in 2 modes: with standard, non-cooled EGR system, and without this system. All of measurements were carried out on the some engine speed – 2000 rpm (speed of maximum engine torque) and various engine loads. It was found that the serial engine control unit switches the EGR system off above 150 Nm engine load (Momax = 295 Nm). In this range of load the engine running with EGR is characterized by higher fuel consumption (lower total efficiency) ca. 5%, compared with engine without EGR. Concentration of NOx in exhaust gases was lower up to 45% but, at the same time, exhaust gas smoke and concentration of carbon oxides were strongly increasing. It can be seen that EGR system increases the temperature (up to 110°C) and changes the composition of air-exhaust gas in the intake manifold. One of reason of this fact is self-changing start of injection. Additional effect of EGR is lower air pressure behind turbocharger, because the flow of exhaust gases (into EGR) is taken before the turbine.
Źródło:
Combustion Engines; 2017, 56, 4; 269-273
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of non-cooled exhaust gas recirculation on the indicator diagrams and heat release parameters in diesel engine cylinder
Autorzy:
Cisek, J.
Powiązania:
https://bibliotekanauki.pl/articles/133039.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust gases
exhaust gas recirculation
EGR
indicator diagrams
rate of heat release
silnik spalinowy
spaliny
recyrkulacja spalin
wykresy indykatorowe
przebieg wywiązywania się ciepła
Opis:
This paper presents the results of the diesel engine research on the indicator and heat realized diagrams for VW 1.9 TDI working in 2 modes: with standard, non-cooled EGR system, and without this system. All of measurement was carried out on the some engine speed – 2000 rpm (speed of maximum engine torque) and various engine load. Some of the analyzed parameters were read directly from the measurement systems (e.g. indicator diagrams) or engine controller (e.g. start of injection) and the rest of them had to be calculated. The calculation of rate of heat release (δQ/dα) was based on the well-known mathematical model. When the exhaust gas recirculation valve is open, the maximum of combustion pressure and rate of maximum kinetic heat release (δQk/dα)max are smaller than when the valve is closed. These facts are connected with the shorter self-combustion delay for engine working with EGR. But this is also associated with reduction of the rate of maximum diffusion heat release (δQd/dα)max, which means that more particulates (PM) are excreted into the atmosphere. This fact explains e.g. significantly higher smog of exhaust gases for diesel engine which works with EGR system. The analysis results show that exhaust gas recirculation system slightly deteriorates the energetic parameters of VW 1.9 TDI engine, but, at the same time, significantly reduces the level of toxic nitrogen oxides in exhaust gases.
Źródło:
Combustion Engines; 2017, 56, 4; 283-288
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gas turbines – technological development and potential use in CAES systems
Turbiny gazowe – rozwój technologiczny i możliwość zastosowania w układach CAES
Autorzy:
Jakowski, D.
Dzida, M.
Powiązania:
https://bibliotekanauki.pl/articles/133845.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
energy storage
CAES
gas turbines
exhaust gas recirculation
EGR
gas turbines classes
modern gas turbine systems
magazynowanie energii
turbiny gazowe
recyrkulacja spalin
klasy turbin gazowych
nowoczesne systemy turbin gazowych
Opis:
This article briefly describes Compressed Air Energy Storage (CAES), focusing on the technological development of one of the key elements of such systems – the gas turbines. It presents the basic parameters and features of gas turbines, as well as turbine classes with example models. Main tendencies in the structural and technological development are discussed. Changes and trends on electric energy markets are becoming more and more dependent on sources with flexible operating characteristics, therefore, the advantages of gas turbines and the reasons for their development are listed as well.
W artykule przedstawiono krótką charakterystykę magazynowania energii w sprężonym powietrzu (CAES), skupiając się na przeglądzie osiągnięć technologicznych jednego z podstawowych elementów tych układów – turbin gazowych. Opisano podstawowe parametry i cechy turbin gazowych, a następnie klasy turbin z przykładowymi modelami. Przedstawiono główne tendencje w rozwoju konstrukcyjnym i technologicznym. Zmiany i trendy na rynkach energii elektrycznej coraz bardziej zależą od źródeł o elastycznej charakterystyce pracy, dlatego zestawiono również zalety i powody rozwoju turbin gazowych.
Źródło:
Combustion Engines; 2016, 55, 2; 46-53
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Koncepcja systemu spalania z wykorzystaniem recyrkulowanych spalin w silniku o zapłonie iskrowym
The concept of combustion system with use of recirculated exhaust gas in the spark ignition engine
Autorzy:
Cieślik, W.
Pielecha, I.
Kapusta, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/134268.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
recyrkulacja spalin
AVL Fire
symulacyjna adaptacja maszyny pojedynczego cyklu
exhaust gas recirculation (EGR)
simulation adaptation of the Rapid Compression Machine
Opis:
Układy recyrkulacji spalin w silnikach o zapłonie samoczynnym są stosowane głównie w celu ograniczenia emisji tlenków azotu, a w silnikach o zapłonie iskrowym mogą być sposobem zmniejszenia zużycia paliwa. Maksymalna wielkość objętościowego udziału recyrkulowanych spalin w silnikach o zapłonie samoczynnym wynosi około 50%. W silnikach o zapłonie iskrowym udział recyrkulowanych spalin jest znacznie mniejszy. Celem artykułu jest symulacyjna analiza sposobów dostarczenia spalin do wnętrza cylindra układu o zapłonie iskrowym w celu uzyskania zapalnej mieszanki. Problemem, który starano się rozwiązać był dobór sposobu dostarczania powietrza i gazów spalinowych w celu uzyskania pożądanego przestrzennego rozkładu powietrza i spalin w cylindrze. Analizy symulacyjne prowadzono z wykorzystaniem pakietu symulacyjnego AVL Fire. Badania dotyczyły trzech wariantów dostarczenia spalin do cylindra, które cechują się odmiennym sposobem tworzenia mieszaniny gazy palne-gazy niepalne. Wyniki badań dotyczące różnych strategii wprowadzenia gazów do komory spalania rozważano pod kątem możliwości inicjowania i przebiegu procesu spalania. Podsumowaniem artykułu jest wybór strategii dostarczania spalin do cylindra silnika. W dalszych etapach prac przewiduje się adaptację badań symulacyjnych na maszynie pojedynczego cyklu.
The system of exhaust gas recirculation in compression ignition engines is used to reduce the emission of nitrogen oxides, and in spark ignition engines it can be used to reduce the fuel consumption. The maximum value of the volumetric recirculation of exhaust gases in compression ignition engine amounts to approximately 50%. In spark ignition engines the share of recirculated exhaust gases is much smaller. The aim of the article is to simulation analysis of the ways of supplying exhaust gases into the cylinder of the spark ignition system in order to obtain a combustible mixture. The problem, which was to be solved, was the method of supplying the air and exhaust gases in order to obtain the required spacial distribution of the air and exhaust gases in a cylinder. The simulation analysis was conducted with the use of AVL Fire simulation package. Tests concerned three methods of supplying exhaust gases into the cylinder, which are characterised by different way of generating the mixture of flammable and inflammable gases. Test results for the different strategies of introducing gases into the combustion chamber were considered in the aspect of the possibility of initiating and the course of combustion process. The summary of the article is the choice of the strategy of supplying the exhaust gases into the cylinder. The adaptation of the simulation tests will be conducted on the Rapid Compression Machine.
Źródło:
Combustion Engines; 2015, 54, 3; 257-263
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Procesy szybkozmienne w cylindrze silnika ZS w warunkach dużego udziału recyrkulowanych spalin
Fast-varying processes in-cylinder CI engine in high EGR conditions
Autorzy:
Pielecha, I.
Borowski, P.
Wisłocki, K.
Skowron, M.
Bueschke, W.
Cieślik, W.
Powiązania:
https://bibliotekanauki.pl/articles/133935.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
recyrkulacja spalin
procesy szybkozmienne
emisja spalin
exhaust gas recirculation (EGR)
fast-varying processes
exhaust emission
Opis:
Celem prowadzonych badań była termodynamiczna identyfikacja procesu spalania zachodzącego w silniku o zapłonie samoczynnym przy udziale recyrkulowanych spalin do 50–60%. Wartości odpowiednich wskaźników uzyskane przy dużym udziale spalin w cylindrze porównywano do wartości uzyskiwanych w silniku pracującym bez recyrkulacji. Badania przeprowadzono na jednocylindrowym silniku AVL 5804 wyposażonym w układ chłodzenia recyrkulowanych spalin. Warunki procesu spalania określano wykorzystując wskaźniki pracy silnika i pomiary szybkozmiennego ciśnienia w cylindrze. Dokonano oceny wpływu różnego udziału tych spalin w cylindrze silnika na przebieg procesu spalania oraz wywiązywania ciepła. W wyniku przeprowadzonych badań wykazano możliwość zastosowania dużej ilości recyrkulowanych spalin (50–60%) bez istotnego pogorszenia warunków pracy silnika, przy jednoczesnej poprawie wskaźników ekologicznych, nie tylko w odniesieniu do emisji tlenków azotu.
The aim of the conducted research was thermodynamic identification of combustion process with 50-60% recirculated exhaust gasses in spark ignition engine. The values of the respective indicators obtained with high share of exhaust gasses in cylinder were compared to values obtained in the engine working without recirculation. The research was conducted on one-cylinder engine AVL 5804 equipped with recirculated gasses cooling system. The conditions of combustion process were determined using indicators of engine work and fast-variable measurements of cylinder pressure. The evaluation of combustion process and heat release with different share of recirculated gasses was made determining the effect of high share of exhaust gasses in engine cylinder. As a result of the conducted research the possibility of exhaust gasses high share(50–60%) usage with simultaneous ecological benefits, not only inrelation to nitrogen oxides was demonstrated.
Źródło:
Combustion Engines; 2015, 54, 3; 316-326
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examination of the influence of multi-injection strategy on thermodynamic indexes of engine cycle and on the emission of toxic compounds
Badanie wpływu strategii wieloczęściowego wtrysku paliwa na termodynamiczne wskaźniki pracy silnika i na emisję składników spalin
Autorzy:
Czajka, J.
Wisłocki, K.
Pielecha, I.
Borowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/133767.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust gas recirculation (EGR)
low temperature combustion
injection strategies
silnik ZS
EGR
niskotemperaturowe spalanie
strategie wtrysku paliwa
Opis:
The main target of this work was to investigate on the 1-cyl. research engine concerning practical realization possibilities of cold-flame-combustion when operating with high and very high Exhaust Gas Recirculation (EGR) rates. After determining of possibilities of lowering NOx and Soot emissions for EGR rates ca. 40-60% some further investigation on optimization of SOIand CoC parameters were performed. Additionally, some preliminary investigations of the optimization of combustion parameters when applying various strategies of multi-injection have been conducted and analyzed.
Głównym celem badań było uzyskanie efektu spalania niskotemperaturowego skutkującego zmniejszeniem emisji NOx wraz z jednoczesnym zmniejszeniem emisji sadzy (cząstek stałych) dzięki zastosowaniu dużego stopnia recyrkulowanych spalin. Po uzyskaniu możliwości obniżenia emisji NOx i sadzy przy zastosowaniu recyrkulacji spalin o udziale 40-60%, prowadzono dalsze badania nad optymalizacją parametrów SOI i CoC. Dodatkowo, prowadzono wybrane wstępne badania optymalizacyjne parametrów procesu spalania przy stosowaniu różnych strategii wtrysku wieloczęściowego.
Źródło:
Combustion Engines; 2014, 53, 2; 45-59
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies