Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Exhaust Gas Recirculation" wg kryterium: Temat


Tytuł:
Adaptive control of exhaust gas recirculation at nonroad vehicle diesel engine
Autorzy:
Bieniek, A.
Graba, M.
Lechowicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/247302.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
exhaust gas recirculation (EGR)
NOx emissions reduction
adaptive control
EGR valve
Opis:
At diesel engines with fuel direct injection, the problems with toxic exhaust compounds concern mainly nitrogen oxides (NOx) and Particulate Matter (PM). For reduction of the NOx's, the exhaust gases are feedback to the combustion chamber. This results with a lower combustion temperature and decrease the emission of NOx gasses. The mass of the recirculated gases cannot be too high because it might lead to an increase in the PM emission. In nonroad vehicle engine the component responsible for the exhaust gases recirculation is most a two state (open/close) EGR Valve. Another problem in this type of combustion engines is volatility of its ecological parameters during exploitation. The reasons are various operation conditions of the engine, fuel quality ect. So, according to the proposed solutions, the engine controller must track these variations. The mass of recirculated gasses must also be corrected. In the proposed solution the EGR valve is a prototype construction of an electronically controlled EGR. The openness of the valve is freely programmable and is controlled by adaptive algorithm saved in the ECU (Electronic Control Unit). As feedback signal to control the openness of EGR valve is used an NOx sensor placed at engine outlet pipe. The paper describe an control circuit of EGR Valve and include research results of nonroad vehicle diesel emissions (NOx and PM missions). The proposed adaptive control of EGR Valve shows potential to reduce especially NOx emissions in aspect to fulfill further emission regulation TIER/Euro
Źródło:
Journal of KONES; 2011, 18, 4; 11-18
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza efektywności niezależnego sterowania zaworami wylotowymi jako sposobu realizacji wewnętrznej recyrkulacji spalin
Analysis of effectiveness of independent exhaust valve control as a method of an internal EGR realization
Autorzy:
Żmudka, Z.
Postrzednik, S.
Przybyła, G.
Powiązania:
https://bibliotekanauki.pl/articles/132866.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
silnik spalinowy
otwarty obieg teoretyczny
wymiana ładunku
niezależne sterowanie zaworami wylotowymi
wewnętrzna recyrkulacja spalin
internal combustion engine
open theoretical cycle
charge exchange
independent exhaust valve control
internal exhaust gas recirculation
Opis:
Przeprowadzono analizę systemu z niezależnym, wcześniejszym zamknięciem zaworu wylotowego, który umożliwia realizację wewnętrznej recyrkulacji spalin oraz wyeliminowanie przepustnicy w silniku ZI. Odniesieniem dla oceny korzyści oraz badania efektywności pozyskiwania pracy, w wyniku zastosowania tego systemu sterowania, jest otwarty obieg teoretyczny Seiligera-Sabathe’a z powszechnie stosowaną klasyczną regulacją dławieniową obciążenia. Analizę porównawczą efektywności zastosowania zaproponowanego systemu przeprowadzono opierając się na wybranych wielkościach: dawce paliwa, pracy obiegu, względnej pracy wymiany ładunku oraz sprawności obiegu. Najlepsze efekty w zakresie zmniejszenia dawki paliwa i zwiększenia sprawności obiegu dla analizowanego systemu, w porównaniu do systemu z regulacją dławieniową, uzyskuje się w obszarze średniego obciążenia silnika.
A system with independent, early exhaust valve closing has been analysed. The analysed system enables realization of an internal EGR and elimination of a throttling valve from inlet system of a spark ignition engine. The open, theoretical cycle has been assumed as a model of processes proceeding in an engine. The system has been analysed individually and comparatively with open Seiliger-Sabathe cycle. Benefits resulting from application of the system with early exhaust valve closing have been assessed on the basis of the selected parameters: a fuel dose, a cycle work, a relative charge exchange work and a cycle efficiency. The best results within decrease of fuel consumption and increase of cycle efficiency are obtained for mean engine load.
Źródło:
Combustion Engines; 2013, 52, 3; 338-345
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of impact of EGR valve construction on the exhaust gas flow parameters in the engine
Analiza wpływu konstrukcji zaworu EGR na parametry przepływu spalin w silniku
Autorzy:
Lenc-Brol, A.
Mamala, J.
Powiązania:
https://bibliotekanauki.pl/articles/134108.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
EGR valve
exhaust gas recirculation (EGR)
exhaust gas flow modeling
zawór EGR
recyrkulacja spalin
modelowanie przepływu spalin
Opis:
In this paper an analysis of the EGR valve design impact, in particular the outlet diameter, on the gas flow parameters in diesel engine (Z 1505) exhaust gas recirculation system of Zetor tractor was made. For this purpose the experimental and simulation studies of gas flow through the valve were carried out. The simulations using Fluent were made. Also distribution of the pressure and velocity vectors in the area of the valve outflow was presented. Analysis of the phenomena occurring in the exhaust area of the EGR valve was made. Also influence of the outlet diameter on the flow characteristics of the EGR valve was determined.
W artykule dokonano analizy wpływu konstrukcji zaworu EGR, a w szczególności średnicy otworu wylotowego na parametry przepływu spalin w układzie recyrkulacji spalin silnika o zapłonie samoczynnym typu Z 1505 ciągnika rolniczego marki Zetor. W tym celu przeprowadzono badania eksperymentalne i symulacyjne przepływu gazów przez zawór. Badania symulacyjne zrealizowano użyciu programu Fluent oraz przedstawiono rozkład wektorów prędkości i ciśnienia w obszarze wypływu gazu z zaworu. Przeanalizowano zjawiska turbulencji zachodzące w obszarze wylotowym zaworu. Określono również wpływ średnicy wylotowej na charakterystykę przepływową zaworu EGR.
Źródło:
Combustion Engines; 2013, 52, 3; 79-85
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the impact of degree of recirculation of exhaust gases and energy fraction of gaseous fuel on overall efficiency and basic parameters of combustion process of dual-fuel diesel (self-ignition) engine fed by natural gas
Analiza wpływu stopnia recyrkulacji spalin oraz udziału energetycznego paliwa gazowego na sprawność ogólną i podstawowe parametry procesu spalania dwupaliwowego silnika o ZS zasilanego gazem ziemnym
Autorzy:
Różycki, A.
Skrzek, T.
Powiązania:
https://bibliotekanauki.pl/articles/1363334.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
dual-fuel
self-ignition
natural gas
recirculation of exhaust gases
overall efficiency
silnik dwupaliwowy
zapłon samoczynny
gaz ziemny
recyrkulacja spalin
sprawność ogólna
Opis:
In the Internal - Combustion Engines and Vehicles Division of the Humanistic-Technological University named after Kazimierz Pułaski in Radom there have been carried out research for many years on self-ignition dual-fuel engine with using different substitute fuels of low value of cetane number. Previous research showed possibilities of using considerable energy fractions of gaseous fuel [1, 8, and 9]. In the present paper there are presented selected results of research concerning utilization of natural gas. During execution of examinations it was observed that together with the change in energy fraction of gaseous fuel and change of degree of recirculation of exhaust gases the change of overall efficiency of engine as well as the change of parameters of combustion process takes place. In this paper there was made an attempt of evaluating the impact of application of different fractions of gaseous fuel and the degree of recirculation of exhaust gases on the parameters of combustion process. There was also made an attempt to clarify causes of the changes in values of overall efficiency as a result of observed changes in the course of combustion.
W Zakładzie Pojazdów i Silników Spalinowych Uniwersytetu Technologiczno-Humanistycznego im. Kazimierza Pułaskiego w Radomiu od szereg lat są prowadzone badania dwupaliwowego silnika o zapłonie samoczynnym z wykorzystaniem różnych paliw zastępczych o małej wartości liczby cetanowej. Dotychczasowe badania wykazały możliwości stosowania znacznych udziałów energetycznych paliwa gazowego [1, 8, 9]. W niniejszym artykule zaprezentowano wybrane wyniki badań dotyczących wykorzystania gazu ziemnego. W trakcie badań zaobserwowano że wraz ze zmianą udziału energetycznego paliwa gazowego oraz zmianą stopnia recyrkulacji spalin zmianie ulega sprawność ogólna silnika a także parametry procesu spalania. W artykule podjęto próbę oceny wpływu stosowania różnych udziałów paliwa gazowego oraz stopnia recyrkulacji spalin na parametry procesu spalania. Podjęto także próbę wyjaśnienia przyczyn zmian wartości sprawności ogólnej w wyniku zaobserwowanych zmian przebiegu spalania.
Źródło:
Archiwum Motoryzacji; 2018, 79, 1; 65-77
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the possibilities to achieve adiabatization process of combustion surrounded by inactive gases in Rapid Compression Machine
Autorzy:
Cieślik, W.
Pielecha, I.
Powiązania:
https://bibliotekanauki.pl/articles/134132.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust gas recirculation
inactive gases
combustion fuels
recyrkulacja spalin
nieaktywne gazy
spalanie paliw
Opis:
In this work non-combustible gases impact on combustion processes studies is performed. Research was performed in a optically accessible rapid compression machine (RCM) under spark ignition engine conditions. The distribution of the swirl charge in the relation to adopted for analysis sequence of gas delivery to the chamber was varied with regard to the main injection. Authors investigate the influence of these sequence on the combustion and the ignition delay of the main injection and the overall combustion characteristics. The aim of this work is the experimental recognition of possibilities of creating combustible mixtures of light hydrocarbon fuels surrounded by non-combustible gases affecting the function of the inhibitor. Specifying the ability of preparation and combustion of mixtures in such systems enables the scientifl analysis of adiabatization of the combustion process of fuel-air mixtures in the operating chambers. Theoretical analysis of the issues indicates possibility of obtaining such a stratification of the charge, that the inactive exhaust gases creating the outer ring surround the combustible mixture inside in such a way as to reduce the amount of heat exchanged between the working medium and the walls of the cylinder.
Źródło:
Combustion Engines; 2017, 56, 1; 27-31
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD modelling of combustion in HCCI engine using avl fire software
Autorzy:
Jamrozik, A.
Powiązania:
https://bibliotekanauki.pl/articles/410680.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
spalanie
zapłon
czas zapłonu
homogenous charge compression ignition
exhaust gas recirculation (EGR)
heat release rate
start of the ignition
burn duration
injection timing
conventional compression ignition engine
indicated pressure
nitric oxide
Opis:
HCCI (Homogenous Charge Compression Ignition) combustion system is now one of the most promising solutions used in piston engines. The paper presents the results of three-dimensional modeling of combustion in the single cylinder HCCI engine powered with Diesel fuel. 3D modeling was performed in AVL Fire code. The basic combustion parameters including start of the ignition (SOI), burn duration (BD), indicated pressure (pi) and nitric oxide (NO) and soot (Soot) emissions were analyzed. The modeling results show that combustion process in HCCI engine compared to a conventional engine with compression ignition is characterized by an earlier ignition (SOI) and shorter burn duration (BD). The impossibility of controlling HCCI combustion process leads to deterioration of engine performance and increased emissions of harmful exhaust gas components. Calculations showed that for the same equivalence ratio of burn mixture, uncontrolled HCCI combustion compared to a controlled combustion in engine with fuel injection operated is characterized by higher NO emission and reduced Soot emission.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2012, 1, 1; 51-55
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charge exchange control in a SI engine by early exhaust valve closing
Autorzy:
Żmudka, Z.
Postrzednik, S.
Przybyła, G.
Powiązania:
https://bibliotekanauki.pl/articles/248009.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
spark-ignition engine
variable valve actuation
early exhaust valve closing
open theoretical cycle
charge exchange process
exhaust gas recirculation (EGR)
Opis:
The paper tackles the problems connected with the charge exchange in internal combustion engines. The theoretical analysis of the charge exchange process in the SI engine has been presented. A system with independent, early exhaust valve closing has been analysed. The analysed system enables realization of an internal EGR and elimination of a throttling valve from an inlet system and reduce the charge exchange work, especially within the range of partial load. The decrease of the charge exchange work leads to an increase of the internal and effective works, which results in an increase of the effective efficiency of the spark ignition engine. The open, theoretical cycle has been assumed as a model of processes proceeding in an engine. The system has been analysed individually and comparatively with open Seiliger-Sabathe cycle. Benefits resulting from application of the system with early exhaust valve closing have been assessed on the basis of the selected parameters: a fuel dose, a cycle work, a relative charge exchange work and a cycle efficiency. The best results within decrease of fuel consumption and increase of cycle efficiency are obtained for low engine load. The main parameters characterizing the process of the internal exhaust gas recirculation were also determined. These are the ratio and the multiplicity of the exhaust gas recirculation.
Źródło:
Journal of KONES; 2013, 20, 1; 387-394
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of the heat balance results of the selected Tier III-compliant gas-fuelled two-stroke main engines
Autorzy:
Korlak, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/24202453.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
heat balance
two-stroke engine
LNG
liquified natural gas
SCR
selective catalytic reduction
EGR
exhaust gas recirculation
bilans cieplny
silnik dwusuwowy
skroplony gaz ziemny
selektywna redukcja katalityczna
recyrkulacja spalin
Opis:
Two-stroke engines are distinguished by the highest overall efficiency among all main engines. This is not only due to the low speed, and large piston stroke, but also to the high combustion temperature, which results in an increase in nitrogen oxides (NOx) emission. Technical solutions applied to bring main engines into compliance with current NOx emission standards set by the Tier III limits include the use of SCR and EGR systems, the implementation of the Otto cycle, and the application of liquified natural gas (LNG) as the low-emission fuel. Impact of the available Tier III-compliant technologies on the heat balance results is analysed using the example of the currently most popular dual-fuel main engines, i.e. WinGD X92DF and MAN G95ME-C10.5-GI. The possibilities of waste heat recovery in the electricity generation process and thereby improving the ship energy efficiency are discussed.
Źródło:
Combustion Engines; 2023, 62, 2; 24--28
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dedicated exhaust gas recirculation in spark ignition engines
Autorzy:
Rehan, S.
Powiązania:
https://bibliotekanauki.pl/articles/103305.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
exhaust gas recirculation
NOx emissions
spark ignition engines
Opis:
The impact of high levels of exhaust gas recirculation (EGR) has been well documented to decrease fuel consumption and reduce emissions of spark ignition engines. But there are also many limitations associated with this technology like EGR control and tolerance, which can reduce the potential efficiency improvements. A new concept called D-EGR has been presented in which the exhaust from a sub group of power cylinders is channeled back to the intake of all the cylinders. In this literature review both experimental and numerical analysis of this technology is shown. In the former case experiments were performed on 2.0 L PFI engine with gasoline as a fuel in part and high load conditions and the results show that at part loads the D-EGR engine can lead to lower Brake Specific Fuel Consumption, lower HC and CO emissions and higher brake thermal efficiency. At high load operations the results show improved combustion stability and superior knock tolerance. In the numerical studies it shows comparable thermal efficiency with conventional spark ignition (SI) engines and reduction in NOX emissions.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 2; 44-50
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ecology from EGR
EGR a ekologia
Autorzy:
Jaskólski, J.
Mikoda, P.
Łasocha, J.
Powiązania:
https://bibliotekanauki.pl/articles/244783.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
redukcja emisji spalin
recyrkulacja spalin
zawór EGR
silnik z zapłonem samoczynnym
reducing of polluting emission
exhaust gas recirculation (EGR)
EGR valve
diesel engine
Opis:
Systematyczne ograniczanie emisji substancji szkodliwych oraz wdrażanie kolejnych edycji norm EURO ostatnimi czasy, w sposób istotny, daje się we znaki konstruktorom i producentom silników spalinowych. Ciekawostką natomiast jest to, iż w pierwszej kolejności ograniczenie emisji substancji szkodliwych odbywa się „na papierze". Wówczas bowiem powstają kolejne obostrzenia przepisów dotyczące emisji substancji szkodliwych. Dopiero później zaczyna się ciężka praca konstruktorów i producentów, aby sprostać temu co zostało zapisane w literze prawa. Doświadczenie ostatnich lat pozwala jednak wypowiedzieć stwierdzenie, iż wykonana praca przynosi wyraźne efekty i doprowadza do globalnego obniżenia emisji substancji szkodliwych. A zatem działania prowadzone w tym kierunku są jak najbardziej uzasadnione i konieczne. Podczas przeprowadzonych badań stwierdzono, że ilość tlenków azotu po zastosowaniu recyrkulacji spalin maleje w sposób istotny. Zgodnie z założeniami recyrkulacja wpłynęła również na wzrost zawartości węglowodorów. Jednostkowe zużycie paliwa z recyrkulacją spalin bez chłodzenia wykazuje spadek wraz z ze wzrostem momentu obrotowego. Jednostkowe zużycie paliwa z recyrkulacją i z chłodzeniem wykazuje nieco wyższy poziom niż bez chłodzenia w całym zakresie badanej zmiany momentu obrotowego. Zatem pomimo zastosowania urządzenia EGR o niezbyt skomplikowane budowie w znacznej mierze potwierdzone zostały założenia teoretyczne. Jednakże sterowanie procesem recyrkulacji nie jest łatwe i wymaga dostrojenia parametrów regulacyjnych (kąt wyprzedzenia wtrysku, dawka paliwa).
The systematic limitations of the emission of harmful substances and the implementation of succeeding editions of last time EURO rules, essentially, are nuisance to constructors and the producers of internal-combustion engines. Curiosity however is this, that first of all limitation of the emissions of harmful matter takes place „on paper". At the same time since originate the succeeding intensifications of rules relative of the harmful matter emissions. Later only the hard work of the constructors and producers is begun, in order to equal this what became endowed in the law. The experience of last years permits however to express ascertainment, that the exercised work brings distinct effects and leads to a global lowering of the emission of harmful matter. But therefore activity led in this direction are most justified and necessary. During performed research was found, that the quantity of the nitrogen oxides on the exhaust recirculation application becomes essentially smaller. In accordance with the assumptions recirculation influenced also on growth of the hydrocarbon content. The unitary fuel consumption with exhaust recirculation without the cooling shows the lowering together with growth of engine torque. The unitary fuel consumption with exhaust recirculation and with the cooling proves some higher level than without the refrigeration in the completely researched range of the engine torque change. Therefore despite the application of the EGR equipment of not very complicated design the theoretical assumptions became affirmed to a large degree. However control of recirculation process is not easy and requires the adaptations of regulating parameters (injection advance angle, fuel dose).
Źródło:
Journal of KONES; 2008, 15, 4; 197-202
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examination of the influence of multi-injection strategy on thermodynamic indexes of engine cycle and on the emission of toxic compounds
Badanie wpływu strategii wieloczęściowego wtrysku paliwa na termodynamiczne wskaźniki pracy silnika i na emisję składników spalin
Autorzy:
Czajka, J.
Wisłocki, K.
Pielecha, I.
Borowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/133767.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust gas recirculation (EGR)
low temperature combustion
injection strategies
silnik ZS
EGR
niskotemperaturowe spalanie
strategie wtrysku paliwa
Opis:
The main target of this work was to investigate on the 1-cyl. research engine concerning practical realization possibilities of cold-flame-combustion when operating with high and very high Exhaust Gas Recirculation (EGR) rates. After determining of possibilities of lowering NOx and Soot emissions for EGR rates ca. 40-60% some further investigation on optimization of SOIand CoC parameters were performed. Additionally, some preliminary investigations of the optimization of combustion parameters when applying various strategies of multi-injection have been conducted and analyzed.
Głównym celem badań było uzyskanie efektu spalania niskotemperaturowego skutkującego zmniejszeniem emisji NOx wraz z jednoczesnym zmniejszeniem emisji sadzy (cząstek stałych) dzięki zastosowaniu dużego stopnia recyrkulowanych spalin. Po uzyskaniu możliwości obniżenia emisji NOx i sadzy przy zastosowaniu recyrkulacji spalin o udziale 40-60%, prowadzono dalsze badania nad optymalizacją parametrów SOI i CoC. Dodatkowo, prowadzono wybrane wstępne badania optymalizacyjne parametrów procesu spalania przy stosowaniu różnych strategii wtrysku wieloczęściowego.
Źródło:
Combustion Engines; 2014, 53, 2; 45-59
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exhaust gas dose uniformity in modern diesel engines
Autorzy:
Krakowian, K.
Kaźmierczak, A.
Górniak, A.
Włostowski, R
Błasiński, T.
Powiązania:
https://bibliotekanauki.pl/articles/246875.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
EGR
exhaust gas recirculation (EGR)
environmental protection
NOx
Opis:
Currently, the environment protection challenges the designers and manufacturers of combustion engines due to the fact that the engine emits toxic compounds, which are hazardous to the life organisms. Increasingly strict regulations concerning emission of the exhaust gases forces application of the innovative technologies or improvement of the presently used. One of systems, which reduce the toxicity of the exhaust gases, is the Exhaust Gas Recirculation (EGR) system. This solution reverse part of the exhaust gases back into the manifold and mixes it with fresh inlet air. In consequence, the combustion temperature decreases. Less oxygen reacts with nitrogen and more connects with carbon and hydrogen. Presently there are two types of EGR system i.e. internal and external. In case of the first one part of the exhaust gases remains in the combustion chamber after the combustion but its construction is not complicated. The external EGR system uses one valve of the exhaust gas recirculation system located on the manifold. This location can result of the uneven portion of exhaust gases directed to the combustion chamber. In consequence, the decrease on the temperature is also uneven and therefore different portion of nitrogen oxide in the exhaust gases.
Źródło:
Journal of KONES; 2012, 19, 2; 259-262
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exhaust gas recirculation strategy in the hydrogen SI engine
Autorzy:
Szwaja, S.
Naber, J. D.
Powiązania:
https://bibliotekanauki.pl/articles/243087.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engine
hydrogen
exhaust gas recirculation (EGR)
Opis:
It is known that Exhaust Gas Recirculation (EGR) can be successfully applied not only for reducing NOx content in exhaust gases but also for reduction of combustion knock in SI engines. From this point of view, EGR can be particularly effective for knock elimination in the hydrogen reciprocating engine. Additionally with the application of EGR, the H2-air combustion can be maintained at the stoichiometric ratio enabling highly efficient NOx reduction in catalytic converters. In this paper a strategy of estimating EGR for the naturally aspirated, hydrogen fuelled engine is explained. On the basis of this strategy, the closed loop control system of the EGR was built and was implemented for the single cylinder CFR engine. There is also an outline of the test bed and several examples of in-cylinder pressure courses recorded under various EGR percentages. Next, the impact of EGR on combustion knock in the hydrogen fuelled engine is presented. Finally, conclusions concerning EGR application for hydrogen combustion in the IC engine are presented. EGR calculation and control scheme, main diagram of EGR calculation, subroutine (Sub-block) for calculating the molecular weight of EGR gases, in-cylinder pressure traces for several EGR levels during hydrogen combustion in the CFR engine, the fluctuating component of in-cylinder pressure during hydrogen combustion with several levels of EGR, peak pressure of fluctuation component of in-cylinder pressure vs. EGR percentage are presented in the paper.
Źródło:
Journal of KONES; 2007, 14, 2; 457-464
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gas turbines – technological development and potential use in CAES systems
Turbiny gazowe – rozwój technologiczny i możliwość zastosowania w układach CAES
Autorzy:
Jakowski, D.
Dzida, M.
Powiązania:
https://bibliotekanauki.pl/articles/133845.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
energy storage
CAES
gas turbines
exhaust gas recirculation
EGR
gas turbines classes
modern gas turbine systems
magazynowanie energii
turbiny gazowe
recyrkulacja spalin
klasy turbin gazowych
nowoczesne systemy turbin gazowych
Opis:
This article briefly describes Compressed Air Energy Storage (CAES), focusing on the technological development of one of the key elements of such systems – the gas turbines. It presents the basic parameters and features of gas turbines, as well as turbine classes with example models. Main tendencies in the structural and technological development are discussed. Changes and trends on electric energy markets are becoming more and more dependent on sources with flexible operating characteristics, therefore, the advantages of gas turbines and the reasons for their development are listed as well.
W artykule przedstawiono krótką charakterystykę magazynowania energii w sprężonym powietrzu (CAES), skupiając się na przeglądzie osiągnięć technologicznych jednego z podstawowych elementów tych układów – turbin gazowych. Opisano podstawowe parametry i cechy turbin gazowych, a następnie klasy turbin z przykładowymi modelami. Przedstawiono główne tendencje w rozwoju konstrukcyjnym i technologicznym. Zmiany i trendy na rynkach energii elektrycznej coraz bardziej zależą od źródeł o elastycznej charakterystyce pracy, dlatego zestawiono również zalety i powody rozwoju turbin gazowych.
Źródło:
Combustion Engines; 2016, 55, 2; 46-53
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of EGR control at in-cylinder pressure and ecological properties of CI off-road vehicle engine
Autorzy:
Bieniek, A.
Mamala, J.
Graba, M.
Hennek, K.
Powiązania:
https://bibliotekanauki.pl/articles/133493.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust gas recirculation
in-cylinder pressure
mass fraction burning
differential pressure
nitrogen oxides
NOx
particulate matter
PM
recyrkulacja spalin
ciśnienie w cylindrze
spalanie frakcji masowej
różnica ciśnień
tlenki azotu
cząstki stałe
Opis:
An attempt has been made to clarify the effect of wide-ranging control of the exhaust gas recirculation system on the cylinder pressure and ecological engine performance. This publication contains the results of tests performed on the CI (compression ignition) engine of the off-road vehicle mounted on the test bench. The study was based on advanced EGR control with a proportional valve and a very efficient exhaust gases cooling system. Analysis of the test results is based on the cylinder pressure and the concentration of NOx and PM components at exhaust gases. The study included the influence of the exhaust gas recirculation system control on parameters such as differential pressure, MBF, and relative NOx and PM emissions. As demonstrated by the analysis conducted, the EGR valve control method and the exhaust gas cooling intensity significantly affect the cylinder pressure and its ecological performance.
Źródło:
Combustion Engines; 2017, 56, 3; 88-95
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies