Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Digital Image Analysis" wg kryterium: Temat


Tytuł:
Zastosowanie metody wektorów nośnych oraz komputerowej analizy obrazu w klasyfikacji korzeni marchwi
Application of support vector machines and digital image analysis in carrot roots classification
Autorzy:
Janaszek, M.
Trajer, J.
Powiązania:
https://bibliotekanauki.pl/articles/290488.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
analiza obrazu
klasyfikacja
marchew
SVM
digital image analysis
classification
carrot
Opis:
W pracy poruszono zagadnienie podejmowania decyzji o przydatności przetwórczej marchwi na podstawie uproszczonej informacji o barwie jej korzeni. Sprawdzono w jakim stopniu barwa pozwoli na odwzorowanie skupień korzeni o podobnych cechach chemicznych, decydujących o dalszym przeznaczeniu surowca. Do klasyfikacji korzeni wykorzystano metodę wektorów nośnych (SVM). Barwę marchwi odczytano z cyfrowych obrazów jej korzeni. Trafność klasyfikacji w zbiorze testowym wskazuje, że barwę można wykorzystać do opracowania wielokryterialnej klasyfikacji marchwi pod względem jej przydatności przetwórczej.
The article presents the study concerning the question of deciding on the processing suitability of carrot on the basis of simplified information about the color of roots. A possibility of mapping clusters of carrot roots having a similar chemical composition, which determine the further allocation of raw material, was examined. In classification of the roots support vector machine (SVM) was used. Carrot color was read from a digital image of its roots. Classification accuracy in the test set indicates that the color can be used to develop a multi-classification of carrots in terms of its processing suitability.
Źródło:
Inżynieria Rolnicza; 2010, R. 14, nr 7, 7; 75-80
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cyfrowa analiza obrazu w technice rolniczej
Digital image analysis in agricultural technology
Autorzy:
Frączek, J.
Powiązania:
https://bibliotekanauki.pl/articles/289783.pdf
Data publikacji:
2005
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
cyfrowa analiza obrazu
technika rolnicza
digital image analysis
agricultural technology
Opis:
W artykule przedstawiono analizę rozwoju Cyfrowej Analizy Obrazu (DIA) w technice rolniczej. Wyodrębniono trzy strumienie przetwarzania danych rejestrowanych w postaci obrazu cyfrowego lub analogowego: badania podstawowe i wdrożeniowe, sterowanie pracą systemu technicznego, diagnostykę maszyn. Analiza istniejących rozwiązań konstrukcyjnych oraz kierunków prowadzonych badań pozwoliła na stwierdzenie, że metody optyczno-elektroniczne stosunkowo najszybciej będą się rozwijały w dziedzinie rozwiązań technicznych związanych z ochroną roślin i nawożeniem oraz z oceną jakości produktów rolniczych.
The present paper presents analysis of development of the Digital Image Analysis (DIS) in the agricultural technology. The processing streams of data recorded in the form of analogue or digital image have been distinguished: basic and implementation tests, controlling the technical system operation, machinery diagnostics. Analysis of the existing construction solutions and directions of the research carried out allowed to state, that the opto-electronic methods will be developing relatively most rapidly in the domain of technical solutions, related to plant protection, fertilization and assessing the quality of agricultural products.
Źródło:
Inżynieria Rolnicza; 2005, R. 9, nr 6, 6; 149-158
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morphological discrimination of granular materials by measurement of pixel intensity distribution (PID)
Autorzy:
Wójcik, Artur
Kościelniak, Piotr
Mazur, Marcin
Mathia, Thomas G.
Powiązania:
https://bibliotekanauki.pl/articles/221800.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
granular material
digital image analysis
pixel intensity distribution
discrimination process control
Opis:
The paper provides statistical analysis of the photographs of four various granular materials (peas, pellets, triticale, wood chips). For analysis, the (parametric) ANOVA and the (nonparametric) Kruskal-Wallis tests were applied. Additionally, the (parametric) two-sample t-test and (non-parametric) Wilcoxon Rank-Sum Test for pairwise comparisons were performed. In each case, the Bonferroni correction was used. The analysis shows a statistical evidence of the presence of differences between the respective average discrete pixel intensity distributions (PID), induced by the histograms in each group of photos, which cannot be explained only by the existing differences among single granules of different materials. The proposed approach may contribute to the development of a fast inspection method for comparison and discrimination of granular materials differing from the reference material, in the production process.
Źródło:
Metrology and Measurement Systems; 2019, 26, 2; 297-308
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of image texture analysis for varietal classification of barley
Autorzy:
Zapotoczny, P.
Powiązania:
https://bibliotekanauki.pl/articles/26635.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
digital image analysis
texture
classification
barley
texture parameter
biological product
statistical model
Opis:
This paper presents the results of a study into the use of the texture parameters of barley kernel images in varietal classification. A total of more than 270 textures have been calculated from the surface of single kernels and bulk grain. The measurements were performed in four channels from a 24 bit image. The results were processed statistically by variable reduction and general discriminant analysis. Classification accuracy was more than 99%.
Źródło:
International Agrophysics; 2012, 26, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pomiar powierzchni przekroju pędu wierzby Salix viminalis L. z wykorzystaniem DIA
Salix viminalis L. willow sprout cross-section area measurement using the DIA
Autorzy:
Frączek, J.
Mudryk, K.
Powiązania:
https://bibliotekanauki.pl/articles/289957.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
wierzba
biomasa
budowa anatomiczna
DIA
Digital Image Analysis
willow
biomass
anatomical structure
Opis:
Istotny wpływ na właściwości fizyczne, a w szczególności mechaniczne pędów, ma ich budowa anatomiczna. Na przekroju pędów wierzby wyróżnić można następujące elementy: kora, łyko, drewno oraz rdzeń. Właściwości fizyczne tych elementów różnią się, a tym samym mają różny wpływ na procesy technologiczne np. cięcia. Z tych względów celem pracy było określenie udziału głównych składowych przekroju poprzecznego pędu. Do analizy przekroju poprzecznego pędów wykorzystano DIA (Digital Image Analysis). Przekroje wykonane zostały przy wykorzystaniu mikrotomu Ergostar HM 200 firmy Microm. Uzyskane wyniki badań umożliwiły między innymi określić model opisujący udział drewna w przekroju poprzecznym pędu.
Anatomical structure of sprouts has considerable influence on their physical, and especially mechanical properties. The following elements may be distinguished in willow sprout cross-section: bark, phloem, wood and core. Physical properties of these elements differ, and thus their impact on technological processes, e.g. cutting, is different. For these reasons, the purpose of the work was to determine the share of sprout cross-section main components. The DIA (Digital Image Analysis) was used to analyse cross-section of sprouts. The cross-sections were made using Ergostar HM 200 microtome from Microm. Among other things, obtained research results allowed to determine the model describing the share of wood in sprout cross-section.
Źródło:
Inżynieria Rolnicza; 2008, R. 12, nr 11(109), 11(109); 47-54
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowe spojrzenie na stare mikrodensytogramy
Autorzy:
Miałdun, J.
Powiązania:
https://bibliotekanauki.pl/articles/130720.pdf
Data publikacji:
2002
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
metoda analogowa
teledetekcja
cyfrowa analiza obrazu
analogue method
remote sensing
digital image analysis
Opis:
W wielu pracowniach teledetekcyjnych istnieją bogate zbiory mikrodensytogramów pozyskanych w minionych latach metodami analogowymi. Opracowane odpowiednimi na ówczesne czasy metodami są dziś trudne do wykorzystania. Niniejsza praca zawiera propozycją metodyki ponownego wykorzystania tych często unikatowych danych teledetekcyjnych. Metodyka opiera się na cyfrowej analizie obrazu wykresów wykonanych na papierze i wzbogacona jes to nowe parametry — n. p. o wymiar fraktalny.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2002, 12; 269-274
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of jumping ability of half-bred mares by means of the measurable method
Ocena możliwości skokowych klaczy półkrwi za pomocą metody wymiernej
Autorzy:
Janczarek, I.
Wilk, I.
Bocian, K.
Powiązania:
https://bibliotekanauki.pl/articles/2196895.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
jumping ability
half-bred mare
measurable method
digital image analysis
horse
animal breeding
Źródło:
Annales Universitatis Mariae Curie-Skłodowska. Sectio EE: Zootechnica; 2013, 31, 2; 12-22
0239-4243
2083-7399
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska. Sectio EE: Zootechnica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie komputerowej analizy obrazu do szacowania zawartości tłuszczu w drobnym mięsie wołowym
The use of digital image analysis to estimate fat content in beef trimmings
Autorzy:
Chmiel, M.
Dasiewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/227775.pdf
Data publikacji:
2009
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
mięso wołowe
komputerowa analiza obrazu
zawartość tłuszczu
digital image analysis
fat content
beef trimmings
Opis:
Celem prezentowanych badań jest ocena możliwości zastosowania komputerowej analizy obrazu do szacowania zawartości tłuszczu w drobnym mięsie wołowym pozyskanym z wykrawania i obróbki karkówki, dolnej zrazowej i skrzydła. Na podstawie przeprowadzonych badań można stwierdzić, że jednoznaczne zdefiniowanie pól białych i czerwonych jest bardzo trudne, a dążenie do uzyskania jak najniższego udziału pól nierozpoznanych, może prowadzić do uzyskania pogorszenia dokładności szacowania. Pomimo zweryfikowania procesu „nauki” i wyliczenia dzięki temu wyższych współczynników korelacji pomiędzy udziałem pól białych a zawartością tłuszczu, konieczne jest prowadzenie dalszych badań nad przydatnością metody komputerowej analizy obrazu do szacowania jakości drobnego mięsa na większej populacji próbek.
The objective of this study was to evaluate the possibility of using Digital Image Analysis for estimating fat content of beef trimmings obtained from chuck, bottom rump and top round. Results proved that marking off white and red spots is was very difficult. The attempt to obtain very low percentage of unrecognized spots could lead to decreased accurancy of analysis. Verifying the “learning” process resulted in higher coefficients of correlation between contribution of white spots and fat content. However it is necessary to continue research on using Digital Image Analysis for estimating quality of beef meat larger population of samples should be analysed.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2009, 1; 61-64
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital analysis of geo-referenced concrete Scanning Electron Microscope (SEM) images
Autorzy:
Ahamad, Mohd Sanusi S.
Maizul, Elly Nur Myaisara
Powiązania:
https://bibliotekanauki.pl/articles/1838090.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
scanning electron microscope
geo-referenced imagery
digital image analysis
image mapping
mikroskop skaningowy
cyfrowa analiza obrazu
mapowanie obrazu
Opis:
The microstructural evaluation of complex cementitious materials has been made possible by the microscopic imaging tools such as Scanning Electron Microscope (SEM) and X-Ray Microanalysis. Particularly, the application of concrete SEM imaging and digital image analysis have become common in the analysis and mapping of concrete technology. In this study, six samples of two-dimensional (2D) SEM images were spatially resampled to produce Geo-referenced SEM sample images. Subsequently, they were analyzed and the intensity histogram plot was produced to facilitate visual interpretation. The consecutive digital image analysis performed was the enhancement and noise removal process using two filtering methods i.e. median and adaptive box filter. The filtered resampled images, then undergone the unsupervised K-Means classification process to collectively separate each individual pixel corresponds to the spectral data. By spatial segmentation of K-Means algorithms, the cluster groups generated were carefully reviewed before proceeding to the final analysis. From the resulting data, the mapping of the spatial distribution of k-cluster and the quantification of micro-cracks (voids) were performed. The results of the SEM images (1st - 4th sample) showed a higher percentage of k-cluster data indicating a good correlation with the major elemental composition of EDX analysis, namely Oxide (O), Silicon (Si) and Carbon (C). Meanwhile, the subjective visual assessment of the image (5th and 6th sample) has confirmed the micro-crack developments on the concrete SEM images upon which the crack density was 3.02 % and 1.30 %, respectively.
Źródło:
Civil and Environmental Engineering Reports; 2020, 30, 2; 67-79
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometrical features of seeds of new pumpkin forms
Cechy geometryczne nasion nowych form dyni
Autorzy:
Ogrodowska, D.
Roszkowska, B.
Tańska, M.
Powiązania:
https://bibliotekanauki.pl/articles/93646.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
pumpkin
seeds
form
geometrical features
Digital Image Analysis
dynia
nasiona
forma
cechy geometryczne
cyfrowa analiza obrazu
Opis:
Plant growers are looking for new crops which would make farms and processing plants more profitable. Currently, in Poland, waste-free pumpkin processing is mainly associated with pumpkin seed production, oil extraction, pulverization of pumpkin oil cake to obtain pumpkin meal, the small-scale use of flesh in food production, but mainly the utilisation of flesh as a feed additive. During technological processes applied for the processing of pumpkin seeds it is important to be familiar with their physical characteristics. The aim of this study was to analyse the geometric characteristics of the seeds of new nine forms of the pumpkin variety Olga, which were bred by researchers from the Department of Plant Genetics, Breeding and Biotechnology at the Warsaw University of Life Sciences. Geometrical features were measured using the Digital Image Analysis (DIA) set, consisting of a digital camera (Nikon DXM 1200), computer and lighting (KAISER RB HF). The following geometrical features were measured: length, width, diameter, perimeter, area, circularity and elongation. Additionally, thickness of the seeds was measured by a calliper. Seeds of the studied forms of hull-less pumpkins differed from the standards in the dimensions and shape, whereas significant differences were demonstrated for the Olga variety standard. The most variable geometric characteristic of the seeds under study was area, while the least variable geometric characteristics of the pumpkin seeds turned out to be the circularity and width.
Hodowcy roślin szukają nowych roślin, które sprawiają, że gospodarstwa i zakłady przetwórcze są bardziej opłacalne. Obecnie w Polsce, bezodpadowe przetwarzanie dyni jest związane przede wszystkim z produkcją nasion dyni, wydobyciem oleju, rozdrabnianiem makucha do postaci mączki dyniowej, wykorzystaniem na małą skalę miąższu w produkcji żywności, ale przede wszystkim wykorzystanie miąższu jako dodatku do pasz. Podczas procesu technologiczne stosowanego do obróbki nasion dyni ważna jest znajomość ich cech fizycznych, dlatego celem niniejszej pracy była analiza cech geometrycznych nasion nowych dziewięciu form odmiany dyni Olga, które zostały wyhodowane przez naukowców z Katedry Genetyki, Hodowli Roślin i Biotechnologii Uniwersytetu Przyrodniczego w Warszawie. Cechy geometryczne były mierzone za pomocą zestawu do Cyfrowej Analizy Obrazu (DIA) składającego się z kamery cyfrowej (Nikon DXM 1200), komputera i oświetlenia (KAISER RB HF). W pracy zostały zmierzone takie cechy geometryczne jak: długość, szerokość, średnica zastępcza, obwód, pole powierzchni, kolistość i wydłużenie. Dodatkowo zmierzono grubość nasion za pomocą suwmiarki. Nasiona badanych form dyni bezłuskowej różniły się od standardów wymiarami i kształtem, przy czym istotne różnice wykazano w porównaniu ze standardem odmiany Olga. Najbardziej zmienną cechą geometryczną badanych nasion było pole powierzchni, natomiast najmniej zmienne okazały się takie cechy jak kolistość i szerokość.
Źródło:
Agricultural Engineering; 2016, 20, 1; 111-118
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dopasowywanie obrazów sonarowych w oparciu o metodę informacji wzajemnej
matching sonar images based on the mutual information method
Autorzy:
Chorzewska, K.
Felski, A.
Powiązania:
https://bibliotekanauki.pl/articles/222148.pdf
Data publikacji:
2012
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
sonogram
cyfrowa analiza obrazu
wyszukiwanie na podstawie zawartości
dopasowywanie obrazów
digital image analysis
content-based image retrieval (CBIR)
image matching
Opis:
Wśród wielu zagrożeń dla współczesnej żeglugi morskiej wymienia się między innymi zagrożenie terroryzmem. Na wodach płytkich może ono przyjmować postać zagrożenia improwizowanymi ładunkami wybuchowymi umieszczanymi na dnie z pokładów dowolnych jednostek, pojawiających się na akwenie w sposób niezauważalny dla kogokolwiek. Jednym z kierunków działań zmierzających do poprawy bezpieczeństwa w tym zakresie jest koncepcja hydroakustycznego systemu ochrony portów, torów wodnych i kotwicowisk. Zakłada ona możliwość szybkiego porównywania obrazów sonarowych z obrazami archiwalnymi, dając podstawy do wykrywania zmian na ochranianym akwenie, przy czym powszechna dostępność technik cyfrowych sugeruje wykonywanie takich poszukiwań w tej właśnie technologii. Porównywanie sonogramów metodami cyfrowej analizy obrazów wymaga w pierwszej kolejności przeprowadzenia ich prawidłowego automatycznego dopasowania. Automatyzacja procesu dopasowania obrazów otwiera dodatkowo perspektywy ich zastosowania w systemach nawigacji porównawczej. W artykule przedstawiono ujęcie tego zagadnienia w sposób właściwy dla technik wyszukiwania obrazów na podstawie zawartości (Content-Based Image Retrieval — CBIR). Wyznaczenie najlepszego dopasowania dwóch sonogramów przeprowadzono w oparciu o metodę maksymalizacji informacji wzajemnej.
Among many threats to the present maritime navigation the terrorism has risen to the rank of one of the most serious. In shallow waters there is a possibility of using the improvised explosive devices which can be placed on the seabed impromptu and imperceptible for anybody from deck of any watercraft or from a harbor quay. One of the proposals to improve the safety in this area is the idea of hydro acoustic surveillance system of ports, fairways and anchorages. It is based on the assumption that sonar images can be quickly compared with archived images leading to detecting changes in the waters protected. Widespread access to digital technologies suggests using them to deal with the problem mentioned. However, to compare sonograms with the digital picture analysis methods requires, first of all, their proper automatic adjustment. The automation of the image-matching process also opens perspectives for using it in systems based on the comparative navigation. The paper presents the approach to the issue based on Content-Based Image Retrieval (CBIR).The Mutual Information method is employed to best match two sonograms.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2012, R. 53 nr 4 (191), 4 (191); 19-32
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of grain quality and the endosperm microstructure of some Czech and Polish winter wheats
Autorzy:
Sadowska, J.
Jelinski, T.
Hruskova, M.
Prihoda, J.
Klockiewicz-Kaminska, E.
Powiązania:
https://bibliotekanauki.pl/articles/24048.pdf
Data publikacji:
2003
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
microstructure
grain quality
classification
starch
digital image analysis
Polska
wheat
size distribution
endosperm
winter wheat
starch granule
Źródło:
International Agrophysics; 2003, 17, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of endosperm microstructure of wheat and durum wheat using digital image analysis
Autorzy:
Fornal, J.
Jelinski, T.
Sadowska, J.
Quattrucci, E.
Powiązania:
https://bibliotekanauki.pl/articles/24217.pdf
Data publikacji:
1999
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
microstructure
electron microscopy
digital image analysis
wheat
wheat cultivar
wheat grain
chemical composition
endosperm
hardness
starch granule
Źródło:
International Agrophysics; 1999, 13, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ rozdzielczości i kompresji obrazu na błąd pomiaru geometrii oraz barwy ziarniaków zbóż
The effect of image resolution and compression on measurement error of cereal grain geometry and colour
Autorzy:
Zapotoczny, P.
Powiązania:
https://bibliotekanauki.pl/articles/291327.pdf
Data publikacji:
2005
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
analiza obrazu
geometria
błąd pomiaru
rozdzielczość
kompresja
cereal grains
digital image analysis
measurement error
resolution
compression
geometric parameters
Opis:
Przedstawiono rozważania nad wpływem rozdzielczości i kompresji obrazu na pomiar geometrii ziarniaków zbóż. Obraz ziarniaków pozyskiwany był za pomocą aparatu cyfrowego, a automatyczny pomiar geometrii wykonany został przy użyciu programu MultiScan v. 11.06. Rozdzielczość i kompresja obrazu nie miały wpływu na pomiar pola powierzchni, natomiast pozostałe wymiary zmieniały się w zależności od rozdzielczości i kompresji.
The study considered the influence of digital image resolution and compression on the measurements of cereal grain geometry. Grain image was obtained by using a digital camera. The automatic measurement of grain geometry was realized by application of the MultiScan v. 11.06 programme. Neither the image resolution nor compression did affect the exactness of grain surface measurement, whereas the other dimensions changed depending on the resolution and compression parameters.
Źródło:
Inżynieria Rolnicza; 2005, R. 9, nr 8, 8; 417-425
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie rentgenowskiej mikrotomografii komputerowej i cyfrowej analizy obrazu do petrologicznej charakterystyki skał węglanowych
X-ray microtomography and digital image analysis application to a petrological characterization of carbonates
Autorzy:
Strzelecki, Piotr Jan
Fheed, Adam
Radzik, Natalia
Świerczewska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/2075973.pdf
Data publikacji:
2019
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
rentgenowska mikrotomografia komputerowa
cyfrowa analiza obrazu
geometria porowa
skały węglanowe
X-ray microcomputed tomography
digital image analysis
porosity geometry
carbonates
Opis:
The paper briefly describes a possible application of X-ray computed microtomography studies followed by digital image analysis, enabling petrological assessment of carbonate rocks. The contribution presents an example of a complex, qualitative and quantitative approach aiming at deriving shape, geometry and spatial orientation of rock components as applied for a carbonate reservoir rock sample from the Zechstein Limestone (Ca1) strata. Apart from the basic properties of the analyzed objects, such as volume, surface area and number, detailed shape descriptors were obtained (compactness, sphericity, elongation, flatness, spareness). The presented approach allows for obtaining detailed 3D results at the microscopic scale, enabling extensive characterization of the studied material geometry. The methods proposed could be applied for other rock types as well.
Źródło:
Przegląd Geologiczny; 2019, 67; 195--197
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wysokoczęstotliwościowy indukcyjny piec rurowy do wyznaczania temperatury topliwości popiołu
High Frequency Induction Tube Furnace for Determining Ash Melting Temperature
Autorzy:
Kurytnik, Igor Piotr
Lis, Stanisław
Tomasik, Marcin
Nawara, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/277357.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
topliwość popiołu
pomiar temperatury
wysokotemperaturowy piec indukcyjny
cyfrowa analiza obrazu
ash melting
temperature measurement
high temperature induction furnace
digital image analysis
Opis:
Praca opisuje problematykę wyznaczania temperatury topliwości popiołu za pomocą indukcyjnego pieca rurowego wykonanego wg autorskiego projektu, realizującego proces spalania (stapiania) próbek popiołu zgodnie z normą z PN-ISO-540:2001. Proces ten jest kontrolowany przez sterownik PLC z zaprogramowanym algorytmem regulacji i stabilizacji temperatury PID, urządzenie wyposażone jest w termoparę typu S oraz system cyfrowej rejestracji i analizy obrazu. Rejestracja obrazu jest niezbędna do wyznaczenia temperatury płynięcia popiołu, wartość ta jest identyfikowana przy zmianie stanu skupienia z stałego w ciekły, próbka popiołu przechodzi z walcowatego kształtu w płynną postać. Prowadzone badania są niezwykle ważne w kontekście spalania biomasy w kotłach, dobór optymalnej temperatury spalania pozwoli przeciwdziałać powstawaniu ceramicznej warstwy na ściankach kotła, która pogarsza jego właściwości eksploatacyjne i w szerszej perspektywie czasu doprowadzi do jego wyłączenia z eksploatacji. Wybrane elektrociepłownie są zobligowane do spalania biomasy w ramach realizacji polityki wzrostu udziału energii odnawialnej w ogólnym bilansie energetycznym, m.in. przez wykorzystanie biomasy. Ponieważ pochodzenie biomasy jest zróżnicowane, stąd również jej skład fizyko-chemiczny jako paliwo jest niejednorodny, dlatego elektrociepłownie muszą określać temperaturę płynięcia popiołu dla poszczególnych partii tego paliwa.
The work describes the problem of determining the fusibility of ash using an induction tube furnace made according to the author’s project, carrying out the process of burning (melting) ash samples in accordance with the PN-ISO-540: 2001 standard. This process is controlled by a PLC with a programmed PID temperature regulation and stabilization algorithm, the device is equipped with a S-type thermocouple and a digital image recording and analysis system. Image registration is necessary to determine the ash flow temperature, this value is identified when the state of aggregation changes from solid to liquid, the ash sample passes from a cylindrical shape to a liquid form. The conducted research is extremely important in the context of biomass combustion in boilers, the selection of the optimal combustion temperature will prevent the formation of a ceramic layer on the boiler walls, which deteriorates its operational properties and in the longer term will lead to its decommissioning. Selected combined heat and power plants are obliged to burn biomass as part of the policy of increasing the share of renewable energy in the overall energy balance, including by using biomass. Because the origin of biomass is varied, hence its physico-chemical composition as a fuel is heterogeneous, therefore CHP plants must determine the ash flow temperature for individual batches of this fuel.
Źródło:
Pomiary Automatyka Robotyka; 2020, 24, 2; 45-50
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of digital image analysis for monitoring the behavior of factors that control the rock fragmentation in opencast bench blasting: a case study conducted over four opencast coal mines of the Talcher Coalfields, India
Autorzy:
Singh, Binay Kumar
Mondal, Debjeet
Shahid, Mohd
Saxena, Amit
Roy, Paresh Nath Singha
Powiązania:
https://bibliotekanauki.pl/articles/1839009.pdf
Data publikacji:
2019
Wydawca:
Główny Instytut Górnictwa
Tematy:
digital image analysis
rock fragmentation
bench blasting
mean fragment size
boulder percentage
cyfrowa analiza obrazu
fragmentacja skał
prace strzałowe
średnia wielkość fragmentu
Opis:
Drilling and blasting play a very important role in driving the economy of opencast mines, as various mining activities related to strata handling are dependent on the size of the rock mass created due to blasting. Thus the analysis of fragments created from rock explosion is essential in order to monitor its compatibility with the deployed mining machineries/HEMMs (such as shovel, dumper, dragline, etc.). As over fragmentation as well as under fragmentation both tend to increase the cost of mining, the generation of fragment size in the desired range is necessary. Several factors control the rock fragmentation in blasting, such as the burden, bench height/drilling depth, stemming column, powder factor and hole diameter. The assessment of rock fragmentation with respect to the aforementioned parameters helps to enhance the blast performance and, hence, this study intends to carry out digital image analysis for monitoring the mean fragment size and boulder percentage. A highly consistent result has been obtained using forty blasting datasets carried out in the four different opencast mines of the Talcher Coalfield (India), namely Balram OCP, Ananta OCP, Lakhanpur OCP, and Lajkura OCP.
Źródło:
Journal of Sustainable Mining; 2019, 18, 4; 247-256
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Subjective Interpretation and Objective Evaluation of Blackout Fabric’s Barrier Properties
Subiektywna interpretacja i obiektywna ocena własności barierowych tkanin zaciemniających
Autorzy:
Snycerski, M.
Szkudlarek, J.
Powiązania:
https://bibliotekanauki.pl/articles/232922.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
light barrier properties
visible radiation
VIS
shading fabrics
blackout
public buildings
digital image analysis
tkaniny zaciemniające
zasłony
budynki użyteczności publicznej
cyfrowa analiza obrazu
Opis:
This work presents an experimental approach and the results of preliminary measurements of the light barrier properties of shading fabrics (blackouts). Based on literature it can be stated that there is a lack of requirements for fabrics with barrier features against sunlight. Woven blackouts which obtain shading properties through their structure need the development of objective methods, measurement indicators, and assessment criteria. Research was conducted on six woven blackouts, commonly used in public buildings as curtains. According to the conventional method, the level of transmittance evaluated was confirmed. All samples feature very good protection against visual radiation (VIS). However the subjective interpretation contributed to the discovery of differences between the samples. The questions raised are as follows: What differences are acceptable? How to qualify blackout fabrics properly? To demonstrate the ineffectiveness of the standard method, computer image analysis was used.
W pracy przedstawiono eksperymentalne podejście oraz wyniki wstępnych pomiarów właściwości barierowych wobec światła przechodzącego tkanin zaciemniających (blackout). Wszystkie tkaniny stosowane w budynkach użyteczności publicznej takich jak hotele i innych budynkach strefy MICE (Spotkań Motywacyjno-Szkoleniowych i Konferencyjno-Wystawienniczych) muszą spełniać specjalne wymagania. Wszystkie tkaniny we wnętrzu powinny być na najwyższym poziomie zgodnym z poziomem kategoryzacji hotelu. Zasłony muszą spełniać odpowiednie lokalne przepisy dotyczące bezpieczeństwa przeciwpożarowego oraz odporności na ścieranie, minimum 40.000 cykli (wg testów Martindale’a). Inne dane techniczne zawierają wskazania co do prania i czyszczenia. Na podstawie przeglądu literatury można stwierdzić, że brak jest wymagań dla tkanin zaciemniających związanych z ich cechami barierowymi. Badania zostały przeprowadzone dla sześciu blackout-ów tkackich powszechnie stosowanych w budynkach użyteczności publicznej jako zasłony. Zgodnie z konwencjonalną metodą oceny określono ich poziom transmitancji. Wszystkie próbki wykazują bardzo dobrą ochronę przed promieniowaniem widzialnym. Jednak subiektywna interpretacja pozwoliła na odkrycie różnic pomiędzy tkaninami. Aby wykazać znaczący poziom tych dysproporcji oraz nieskuteczność standardowej metody oceny tkanin blackout zastosowano komputerową analizę obrazu. W tej sytuacji powstają wątpliwości: Jakie różnice są dopuszczalne? Jak precyzyjnie kwalifikować tkaniny zaciemniające?
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 5 (119); 44-49
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of structure and morphology of surface layers formed on TRIP steel by the femtosecond laser treatment
Autorzy:
Duriagina, Z. A.
Tepla, T. L.
Kulyk, V. V.
Kosarevych, R. Ya.
Vira, V. V.
Semeniuk, O. A.
Powiązania:
https://bibliotekanauki.pl/articles/367952.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
femtosecond laser
TRIP steel (03X13AG19)
image processing algorithms
digital image analysis
metallographic complex
laser femtosekundowy
stal TRIP
algorytmy przetwarzania obrazu
cyfrowa analiza obrazu
Opis:
Purpose: The purpose of the work is to demonstrate the possibility of using a femtosecond laser for forming surface layers with an adjustable microstructure on the surface of TRIP steel 03X13AG19, and processing the obtained images using digital complexes. Design/methodology/approach: A laser treatment of TRIP steel (03X13AG19) with pulses of femtosecond duration was carried out in a melting mode. The source of the radiation is a femtosecond titanium-sapphire Ti:Al2O3 complex consisting of a predefining femtosecond generator “Mira Optima 900-F” and regenerative amplifier Legend F-1K-HE. Peculiarities of the surface structure of irradiated samples were studied using a Solver P47-PRO atomic force microscope. The structural-geometric parameters of the surface of the investigated steel treated with the femtosecond laser were determined using the software package Nova 1.0.26.1443 and the functions of the Image Analysis. Microstructural analysis was performed using a raster electron microscope JSM 6700F and a METAM-1P microscope. In this work, the digitization of images of microstructures obtained as a result of surface irradiation by highly concentrated energy streams of femtosecond duration has been carried out. The analysis of the surface structure of laser-structured materials was carried out using a metallographic complex with the software ImProcQCV. Findings: It has been revealed that the predetermined change of the laser treatment mode changes the microrelief and the shape and size of the fragments of the surface structure of the investigated steel. The use of digital image processing allowed to generalize the morphological features of the surface structure, to assess in detail the character of the microrelief, and to monitor under in-situ mode the structure and properties of the surface of the material being studied. Research limitations/implications: The obtained research results can be applied to stainless steels of various structural classes. Practical implications: Surface digitization significantly reduces the time for research, improves the quality and accuracy of the data obtained, makes it possible to conduct in-situ researches with the further implementation of the results using the Internet of Things technologies. Originality/value: A comprehensive approach is proposed for the estimation of parameters of laser-induced periodic surface structures (LIPSS) using a metallographic complex with the software ImProcQCV.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2019, 93, 1-2; 5-19
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural Modelling of Blackout Fabrics Patterned by Weave Used as a Curtain in Interior Public Spaces
Modelowanie konstrukcyjne tkanin blackout wzorowanych splotowo stosowanych jako zasłony do wnętrz użyteczności publicznej
Autorzy:
Szkudlarek, J.
Snycerski, M.
Powiązania:
https://bibliotekanauki.pl/articles/231553.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
blackouts
curtains
weaving blackout
light barrier properties
visible radiation
VIS
suspension systems load
digital image analysis system
zaciemnianie
zasłony
tkactwo
właściwości bariery świetlnej
promieniowanie widzialne
obciążenia systemów zawieszenia
cyfrowy system analizy obrazu
Opis:
In the first part of this article a new construction of blackout fabrics and attempts at modifying them are described. The assumption of the research was to obtain a weaving barrier against visible light (VIS) in weave-patterned fabric (jacquard) used as a curtain designed for public buildings. For this purpose the possibility of obtaining barrier properties in one-warp and build-up thread fabric was checked. Afterwards the barrier properties of the weaving structures designed were evaluated by the spectrophotometric method according to standard methodology. The level of barrier properties achieved confirms the legitimacy of the hypothesis about the possibility of acquiring such properties in patterned jacquard fabrics. The article presents the first attempt at an objective assessment of the barrier properties of jacquard blackout fabrics conducted based on digital image analysis. The experimental results proved that the method proposed allows to detect the structural interstices of woven fabric correctly, which can be used to asses the value of barrier features. The work is a summary of achievements in the field of the design and assessment of barrier properties of a new type of blackout fabrics.
W pierwszej części artykułu opisano nową konstrukcję tkaniny zaciemniającej, oraz próby jej modyfikowania. Założeniem badań było uzyskanie barierowości tkackiej wobec światła widzialnego VIS w tkaninie zasłonowej wzorowanej splotowo przeznaczonej do stosowania w obiektach użyteczności publicznej. W tym celu sprawdzono możliwość uzyskania barierowości w tkaninie jednoosnowowej z nawarstwionym wątkiem. Następnie oceniono właściwości barierowe zaprojektowanych struktur tkackich metodą spektrofotometryczną. Uzyskany poziom barierowości potwierdza słuszność hipotezy o możliwości uzyskania takich właściwości w tkaninach wzorowanych żakardowo. W artykule przedstawiono próbę obiektywnej oceny właściwości barierowych tkanin żakardowych typu blackout prowadzoną w oparciu o cyfrową analizę obrazu. Praca jest podsumowaniem dotychczasowych osiągnięć z zakresu konstrukcji i oceny właściwości barierowych tkanin blackout nowego typu.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 4 (124); 45-49
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zagęszczanie dużych płyt z mma w laboratorium z zastosowaniem drogowego walca prowadzonego
Application of walk-behind roller for compaction of asphalt mixes large plates.
Autorzy:
Maliszewski, M.
Zofka, A.
Maliszewska, D.
Mirski, K.
Sybilski, D.
Powiązania:
https://bibliotekanauki.pl/articles/144000.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
walec drogowy prowadzony
jednorodność zagęszczania
cyfrowa analiza obrazu
orientacja ziaren kruszywa
nowe metody zagęszczania w laboratorium
walk-behind roller
compaction uniformity
digital image analysis
orientation of aggregate particles
new concept of laboratory compaction
Opis:
W niniejszym artykule przedstawiono doświadczenia IBDiM z uruchomienia stanowiska zagęszczania próbek w warunkach laboratoryjnych przy użyciu małego walca drogowego prowadzonego. Wykonano analizę porównawczą jednorodności zagęszczenia oraz orientacji ziaren kruszywa w próbkach z mieszanki mineralno-asfaltowej wykonanych różnymi metodami. Orientację ziaren kruszywa oceniono na podstawie analizy numerycznej obrazu przeciętych próbek przy użyciu autorskiej procedury napisanej w oprogramowaniu Matlab. W metodzie zagęszczania próbek przy użyciu walca prowadzonego uzyskano najlepszą jednorodność zagęszczenia oraz optymalne ułożenie ziaren kruszywa.
This paper describes experience with sample preparation method using manual asphalt roller compactor in IBDiM laboratory. Compared analysis of compacted specimen uniformity was performed on different type of specimens. Also the orientation of aggregates in asphalt matrix was evaluated. Author’s procedure for this evaluation was prepared using Matlab software. Specimens prepared using manual roller compactor were characterized by highest uniformity of compaction and differential aggregates orientation comparing to other specimen compaction methods.
Źródło:
Drogownictwo; 2014, 5; 165-169
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical Filters’ Influence on Digital Image Quality in High Temperature Measurements of Surface Properties
Autorzy:
Fabijanska, A
Sankowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/108736.pdf
Data publikacji:
2009
Wydawca:
Społeczna Akademia Nauk w Łodzi
Tematy:
digital image processing
image quality
optical filters
image quantitative analysis
image noise
Opis:
This paper is concerned with high temperature image quantitative analysis systems. Particular attention is paid to computerised system for surface properties (wetting angle and surface tension) determination. A brief description of the system is given. The specificity of the performed measurements based on images presenting heat-emitting objects is considered. Moreover, the significance of optical filters’ usage is explained. Infrared and neutral density filters are regarded. Influence of these filters on digital image quality is deliberated. Especially image noise presence is considered. The detailed analysis of noise properties change due filters usage is carried out. Finally, results of the analysis are presented and discussed.
Źródło:
Journal of Applied Computer Science Methods; 2009, 1 No. 2; 53-63
1689-9636
Pojawia się w:
Journal of Applied Computer Science Methods
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Salt and pepper noise reduction and edge detection algorithm based on neutrosophic logic
Autorzy:
Arulpandy, P.
Trinita Pricilla, M.
Powiązania:
https://bibliotekanauki.pl/articles/1839286.pdf
Data publikacji:
2020
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
neutrosophic set
digital image processing
image analysis
image denoising
edge detection
Opis:
Neutrosophic set (NS) is a powerful tool to deal with indeterminacy. In this paper, the neutrosophic set is applied to the image domain and a novel edge detection technique is proposed. Noise reduction of images is a challenging task in image processing. Salt and pepper noise is one kind of noise that affects a grayscale image significantly. Generally, the median filter is used to reduce salt and pepper noise; it gives optimum results while compared to other image filters. Median filter works only up to a certain level of noise intensity. Here we proposed a neighborhood-based image filter called nbd-filter, it works perfectly for gray image regardless of noise intensity. It reduces salt and pepper noise significantly at any noise level and produces a noise-free image. Further, we proposed an edge detection algorithm based on the neutrosophic set, it detects edges efficiently for images corrupted by noise and noise-free images. Since most of the real-life images consists of indeterminate regions, neutrosophy is a perfect tool for edge detection. The main advantage of the proposed edge detector is, it is a simple and efficient technique and detect edges more efficient than conventional edge detectors.
Źródło:
Computer Science; 2020, 21 (2); 179-195
1508-2806
2300-7036
Pojawia się w:
Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical characterization of orthotropic elastic parameters of a foam by the mixed experimental-numerical analysis
Autorzy:
Chuda-Kowalska, M.
Gajewski, T.
Garbowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/279786.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
orthotropic elastic foams
digital image correlation
inverse analysis
Opis:
Different kind of foams, usually made from polymers, metals, ceramics, glass, etc. have been widely used in various branches of civil engineering since the 80s. The most common are polyurethane foams. Since their role in construction nowadays is not only to act as a thermal barrier but also to take some of loads, the engineers need to know also their mechanical properties. This implies that manufacturers or designers must perform a number of laboratory tests in order to find a set of substantial parameters of this particular material. Due to noticeable orthotropic behavior of foams, one needs to carry out several laboratory tests to identify elastic properties only. Here, an enhanced testing methodology is proposed to reduce the number of tests required for characterization of elastic orthotropic properties of foams. By combining the advanced measurement techniques, non-traditional experimental setup, numerical modeling and inverse analysis one can capture all nine elastic properties from just two or three tests. In the paper, full experimental and numerical procedures are presented and validated by noisy pseudo-experimental data.
Źródło:
Journal of Theoretical and Applied Mechanics; 2015, 53, 2; 383-394
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method for identification the recording device of digital images
Metod identifikacii apparatury zapisi cifrovykh fotografijj
Autorzy:
Sidorov, N.
Byelozorov, E.
Powiązania:
https://bibliotekanauki.pl/articles/793662.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
image
spectral characteristics
digital image
recording device
signal decomposition
wavelet analysis
algorithm
experimental research
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2014, 14, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies