Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Diesel engine emissions" wg kryterium: Temat


Tytuł:
Spaliny emitowane z silników Diesla, mierzone jako węgiel elementarny : dokumentacja proponowanych dopuszczalnych wielkości narażenia zawodowego
Diesel engine exhaust, measured as elemental carbon : documentation of proposed values of occupational exposure limits (OELs)
Autorzy:
Szymańska, Jadwiga
Frydrych, Barbara
Bruchajzer, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/137403.pdf
Data publikacji:
2019
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
spaliny emitowane z silnika Diesla
toksyczność
narażenie zawodowe
NDS
nauki o zdrowiu
inżynieria środowiska
Diesel engine emissions
toxicity
occupational exposure
MAC-TWA
health sciences
environmental engineering
Opis:
Spaliny emitowane z silników Diesla (SESD) to wieloskładnikowe mieszaniny związków chemicznych powstające w wyniku niecałkowitego spalania paliwa i oleju silnikowego. Działanie toksyczne spalin jest związane z obecnością w nich związków o działaniu toksycznym i kancerogennym. W GIS podano w 2019 r., że liczba pracowników zatrudnionych w warunkach stanowiących 0,1 ÷ 0,5 wartości NDS (obowiązujących dla spalin emitowanych z silników Diesla) w 2017 r. oraz w 2018 r. wynosiła odpowiednio 1 071 i 986, natomiast w warunkach 0,5 ÷ 1 NDS wynosiła odpowiednio 26 i 46. W wykazie chorób zawodowych w latach 2013- 2017 zarejestrowano 2 przypadki nowotworów: jeden pęcherza moczowego i jeden krtani (narażenie na WWA obecne w spalinach). W klinicznym obrazie ostrego zatrucia spalinami dominuje działanie drażniące na błony śluzowe oczu i górnych dróg oddechowych. Podrażnienie spojówek oczu jest uważane za jeden z bardziej czułych wskaźników narażenia na spaliny. Zatrucia przewlekłe są obserwowane zazwyczaj u osób zawodowo narażonych przez co najmniej kilka lat. Dominują u nich zmiany czynnościowe i morfologiczne w układzie oddechowym. Przedłużające się narażenie na duże stężenia spalin powodowało: kumulację cząstek stałych w makrofagach, zmiany w komórkach płuc, zwłóknienie i metaplazję nabłonka. Narażenie na spaliny może zaostrzać objawy istniejących już chorób, np. astmy czy alergii. Wyniki badań epidemiologicznych świadczą o istnieniu związku pomiędzy zawodowym narażeniem na spaliny emitowane z silników Diesla a zwiększoną częstością występowania pewnych grup nowotworów, głównie raka płuca i raka pęcherza moczowego. W badaniach przeprowadzonych na zwierzętach laboratoryjnych wykazano, że narażenie na spaliny emitowane z silników Diesla powodowało zaburzenia układów: oddechowego, krążenia, nerwowego i odpornościowego. W testach mutagenności wykazano dodatnie reakcje w kilku szczepach Salmonella. Wyniki badań na zwierzętach (narażenie prenatalne i dorosłych osobników) świadczą o tym, że narażenie na spaliny może mieć wpływ na płodność samców. W załączniku III Dyrektywy Parlamentu Europejskiego i Rady (UE) 2019/130 zostały zamieszczone wartości dopuszczalne narażenia zawodowego zmieniające dyrektywę 2004/37/WE. Dla spalin emitowanych z silników Diesla dla 8-godzinnego dnia pracy wartość ta została ustalona na 0,05 mg/m3 (mierzone jako węgiel elementarny). Po 1 ÷ 2-godzinnym narażeniu inhalacyjnym ludzi na stężenia 75 ÷ 225 µg/m³ (jako węgiel elementarny) obserwowano zmniejszenie parametrów czynnościowych układu oddechowego oraz wystąpienie zmian zapalnych w płucach. Brak jest wystarczających danych dotyczących narażenia zawodowego na spaliny emitowane z silników Diesla nowej generacji. W związku z tym zaproponowano przyjąć jako wartość NDS dla spalin emitowanych z silników Diesla stężenie 0,05 mg/m³ (mierzone jako węgiel elementarny) ujęte w Dyrektywie 2019/130, bez wyznaczania wartości NDSCh oraz NDSP. Zakres tematyczny artykułu obejmuje zagadnienia zdrowia oraz bezpieczeństwa i higieny pracy będące przedmiotem badań z zakresu nauk o zdrowiu oraz inżynierii środowiska.
Exhaust emissions from diesel engines (SESD) are multi-component mixtures of chemical compounds resulting from incomplete combustion of fuel and engine oil. The toxic effect of exhaust gases is associated with the presence of toxic and carcinogenic compounds in them. GIS reports in 2019 that the number of employees employed in conditions constituting 0.1– 0.5 of MAC-TWA (applicable for exhaust emissions from diesel engines) in 2017 and in 2018 was 1071 and 986, respectively, while in conditions 5–1 MAC-TWA were 26 and 46, respectively. In the list of occupational diseases in the years 2013–2017, two cases of cancer were registered: in the bladder and in the larynx (exposure to PAHs present in exhaust gases). In the clinical picture of acute exhaust poisoning, irritant effects on the mucous membranes of the eyes and upper respiratory tract predominate. Eye conjunctival irritation is considered to be one of the most sensitive indicators of exhaust gas exposure. Chronic poisoning is usually seen in people who have been exposed to work for at least several years. Functional and morphological changes in the respiratory system dominate. Prolonged exposure to high concentrations of exhaust gases has resulted in accumulation of solid particles in macrophages, changes in lung cells, fibrosis and epithelial metaplasia. Exposure to exhaust fumes can exacerbate the symptoms of existing diseases, e.g., asthma, allergies. The results of epidemiological studies indicate a relationship between occupational exposure to exhaust gas emitted from diesel engines and the increased incidence of certain groups of cancers, mainly lung cancer and bladder cancer. Studies conducted on laboratory animals have shown that exposure to exhaust fumes emitted from diesel engines caused disorders of the respiratory, circulatory, nervous and immune systems. Mutagenicity tests showed positive responses in several Salmonella strains. Animal studies (prenatal and adult exposure) suggest that exposure to exhaust gas may affect male fertility. Annex III of Directive (EU) 2019/130 of the European Parliament and of the Council contains occupational exposure limit values amending Directive 2004/37/EC. For exhaust emissions from diesel engines for an 8-hour working day, this value was set at 0.05 mg/m³ (measured as elemental carbon). After 1–2 hours of human inhalation exposure to concentrations of 75–225 µg/m³ (as elemental carbon), a decrease in respiratory function parameters and the occurrence of inflammatory changes in the lungs were observed. There is insufficient data on occupational exposure to exhaust emissions from new-generation diesel engines. Therefore, it was proposed to adopt as the MAC-TWA value for exhaust emissions from diesel engines a concentration of 0.05 mg/m³ (measured as elemental carbon) included in Directive 2019/130, without setting STEL and TLV-C. This article discusses the problems of occupational safety and health, which are covered by health sciences and environmental engineering.
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2019, 4 (102); 43-103
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spaliny silników Diesla mierzone jako węgiel elementarny. Metoda oznaczania w powietrzu na stanowiskach pracy
Diesel engine exhaust measured as elemental carbon. Determination in workplace air
Autorzy:
Szewczyńska, Małgorzata
Pośniak, Małgorzata
Kowalska, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/23352084.pdf
Data publikacji:
2023
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
węgiel elementarny
metoda analityczna
powietrze na stanowiskach pracy
spaliny silników Diesla
nauki o zdrowiu
inżynieria środowiska
elemental carbon
determination method
workplace air
Diesel engine emissions
health sciences
environmental engineering
Opis:
W Polsce dotychczas nie było konieczności oznaczania stężenia węgla elementarnego (EC) w celu oceny narażenia inhalacyjnego pracowników, ponieważ polska wartość NDS jest ustalona dla frakcji respirabilnej spalin silników Diesla. Nie ma również żadnych danych dotyczących poziomu stężeń EC w powietrzu stanowisk pracy, a narażenie na ten niebezpieczny dla zdrowia czynnik dotyczy bardzo dużej populacji pracowników zatrudnionych m.in. w podziemnych wyrobiskach górniczych, jak również strażaków, kierowców tirów, autobusów, a także pracowników stacji obsługi samochodów (Szymańska i in. 2019). Wprowadzenie do Dyrektywy Parlamentu Europejskiego i Rady (UE) 2019/130 z dnia 16 stycznia 2019 r. wartości BOELV 0,05 mg/m³ dla spalin silników wysokoprężnych Diesla w środowisku pracy, mierzonych jako węgiel elementarny, wymaga dostosowania przepisów krajowych do tej wartości i opracowania metody oznaczania węgla elementarnego. Celem prac badawczych było opracowanie metody oznaczania węgla elementarnego w powietrzu na stanowiskach pracy na poziomie 0,005 mg/m³ . W wyniku badań opracowano metodę oznaczania węgla elementarnego w powietrzu na stanowiskach pracy z zastosowaniem termo-optycznego analizatora z detektorem płomieniowo-jonizacyjnym. Metoda polega na przepuszczeniu badanego powietrza zawierającego spaliny silnika Diesla przez filtr kwarcowy umieszczony w kasecie i analizie w odpowiednim programie temperaturowym. Uzyskano oznaczalność EC 0,0041 mg/m³ . Całkowita precyzja badania wynosiła 5,3%, względna niepewność całkowita 11,6%, a niepewność rozszerzona 23,2%. Zakres tematyczny artykułu obejmuje zagadnienia zdrowia oraz bezpieczeństwa i higieny środowiska pracy będące przedmiotem badań z zakresu nauk o zdrowiu oraz inżynierii środowiska.
In Poland, until now it has not been necessary to determine the elemental carbon (EC) concentrations because Polish NDS values are set for a respirable fraction of diesel exhausts. No data on the level of EC concentrations in workplace air are available although the exposure to this hazardous factor concerns a large population of workers. The exposure concerns people working in underground mines and tunneling, firefighters, lorry and bus drivers, and car service station workers. The introduction of 0.05 mg/m³ BOELV value for diesel exhaust gases in working environment, measured as elemental carbon into the Directive 2019/130 of the European Parliament, requires the adjustment of the national legislation. The aim of the study was to develop a method for determining EC in workplace air at the level of 0.005 mg/m³ . As a result, a method for determination EC in workplace air using a thermo-optical analyzer with a flame ionization detector was developed. The method consists in passing the tested air containing diesel exhaust gases through a quartz filter placed in a cassette and its analysis in an appropriate temperature program. An EC determination of 0.0041 mg/m³ was obtained. The total accuracy of the method was 5.3%, a relative total uncertainty was 11.6% and an expanded uncertainty was 23.2%. This article discusses problems of occupational safety and health, which are covered by health sciences and environmental engineering.
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2023, 1 (115); 5--25
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spaliny emitowane z silników Diesla, mierzone jako węgiel elementarny : metoda oznaczania w powietrzu na stanowiskach pracy
Diesel engine exhaust measured as elemental carbon : determination in workplace air
Autorzy:
Szewczyńska, Małgorzata
Pośniak, Małgorzata
Kowalska, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/1845088.pdf
Data publikacji:
2020
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
węgiel elementarny
metoda analityczna
powietrze na stanowiskach pracy
spaliny silników Diesla
nauki o zdrowiu
inżynieria środowiska
elemental carbon
determination method
workplace air
Diesel engine emissions
health sciences
environmental engineering
Opis:
W Polsce dotychczas nie było konieczności oznaczania stężenia węgla elementarnego (EC) w celu oceny narażenia inhalacyjnego pracowników, ponieważ polska wartość NDS jest ustalona dla frakcji respirabilnej spalin silników Diesla. Nie ma również żadnych danych dotyczących poziomu stężeń EC w powietrzu stanowisk pracy, a narażenie na ten niebezpieczny dla zdrowia czynnik dotyczy bardzo dużej populacji pracowników zatrudnionych m.in. w podziemnych wyrobiskach górniczych, jak również strażaków, kierowców tirów, autobusów, a także pracowników stacji obsługi samochodów (Szymańska i in. 2019). Wprowadzenie do Dyrektywy Parlamentu Europejskiego i Rady (UE) 2019/130 z dnia 16 stycznia 2019 r. wartości BOELV 0,05 mg/m³ dla spalin silników wysokoprężnych Diesla w środowisku pracy, mierzonych jako węgiel elementarny, wymaga dostosowania przepisów krajowych do tej wartości i opracowania metody oznaczania węgla elementarnego. Celem prac badawczych było opracowanie metody oznaczania węgla elementarnego w powietrzu na stanowiskach pracy na poziomie 0,005 mg/m³ . W wyniku badań opracowano metodę oznaczania węgla elementarnego w powietrzu na stanowiskach pracy z zastosowaniem termo- -optycznego analizatora z detektorem płomieniowo-jonizacyjnym. Metoda polega na przepuszczeniu badanego powietrza zawierającego spaliny silnika Diesla przez filtr kwarcowy umieszczony w kasecie i analizie w odpowiednim programie temperaturowym. Uzyskano oznaczalność EC 0,0027 mg/m³ . Całkowita precyzja badania wynosiła 5,6%, względna niepewność całkowita 11,2%, a niepewność rozszerzona 22,4%. Zakres tematyczny artykułu obejmuje zagadnienia zdrowia oraz bezpieczeństwa i higieny środowiska pracy będące przedmiotem badań z zakresu nauk o zdrowiu oraz inżynierii środowiska.
In Poland, until now it has not been necessary to determine the elemental carbon (EC) concentrations because Polish NDS values are set for a respirable fraction of diesel exhausts. No data on the level of EC concentrations in workplace air are available although the exposure to this hazardous factor concerns a large population of workers. The exposure concerns people working in underground mines and tunneling, firefighters, lorry and bus drivers, and car service station workers. The introduction of 0.05 mg/m³ BOELV value for diesel exhaust gases in working environment, measured as elemental carbon into the Directive 2019/130 of the European Parliament, requires the adjustment of the national legislation. The aim of the study was to develop a method for determining EC in workplace air at the level of 0.005 mg/m³ . As a result, a method for determination EC in workplace air using a thermo-optical analyzer with a flame ionization detector was developed. The method consists in passing the tested air containing diesel exhaust gases through a quartz filter placed in a cassette and its analysis in an appropriate temperature program. An EC determination of 0.0027 mg/m³ was obtained. The total accuracy of the method was 5.6%, a relative total uncertainty was 11.2% and an expanded uncertainty was 22.4%. This article discusses problems of occupational safety and health, which are covered by health sciences and environmental engineering.
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2020, 4 (106); 143-162
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact analysis of internal catalyst converter on operating parameters of VW 1.9 TDI engine
Autorzy:
Haller, P.
Jankowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/242517.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
catalyst
diesel engine
emissions
Opis:
The largest amount of air pollutants is produced by the combustion of fossil fuels (coal, lignite, petroleum, natural gas, etc.). Such combustion releases huge amounts of greenhouse gases into the atmosphere (including carbon oxides (CO, CO2), sulphur oxides (SO2, SO3), nitrogen oxides (NO, NOx)) and dust, ashes and soot. Transportation is a significant share of the air pollution, mainly wheel-based transportation. The combustion process in diesel engine is very complex physico-chemically and varies in time. The process is accompanied by simultaneous exchange of heat and mass and chemical reactions. The development of internal combustion engines is made towards meeting of the increasingly stringent requirements for toxic exhaust emissions, reduction of fuel consumption, and preservation of Earth's natural resources. The problem to solve in modern diesel engines is the emission of toxic compounds. One way to reduce emissions is to use a catalytic converter positioned directly in the combustion chamber of an internal combustion engine. The aim of this analysis is assessment of toxic emissions of a diesel engine with an internal catalyst. Qualitative assessment of engine emissions was determined by comparing test results of an engine with ceramic-ally coated valves against one with just conventional valves (commercial valves - without a ceramic coating). The study utilized a fourcylinder 1.9 TDI VW engine. It was expected that the use of glow plugs with an active coating would reduce the release of toxic compounds.
Źródło:
Journal of KONES; 2014, 21, 1; 99-106
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Water - fuel microemulsions influence on fuel consumption and exhaust gas emissions
Autorzy:
Cienciała, M.
Haller, P.
Jankowski, A.
Kardasz, P.
Powiązania:
https://bibliotekanauki.pl/articles/244361.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine
diesel engine
microemulsion
fuel consumption
emissions
Opis:
Combustion in a diesel engine is a complex physicochemical process, changing the time at which the events take place simultaneously heat and mass transfer and chemical reactions. The development of internal combustion engines goes towards meeting the increasingly stringent requirements for toxic exhaust emissions, reducing fuel consumption and therefore reduce carbon emissions and protect the Earth's natural resources. The problem to solve in modern combustion engines is the emission of NOx. One way to reduce the emission of toxic NOx combustion engine power is water-hydrocarbon emulsions [1]. Research combustion engines water-hydrocarbon emulsions has been its tradition. So far, attempts were carried out using an emulsion obtained by a chemical. Emulsions of oil and water can be obtained by adding various detergents to prevent delamination of the oil and water. In this article, we consider the possibility of applying a mixture of water and oil as an alternative fuel used to power internal combustion engines used in heavy road transport. This work is preliminary work, also having to check whether this is the future direction of the work. The measurements of emissions of exhaust gases and fuel consumption. After analysing the test results confirmed that the improvement of the economic and environmental performance of modern diesel engines, it can be achieved by supplying synthetic diesel or gas oil water emulsions. It was found that the use of emulsion leads to a reduction of fuel consumption and NOx emissions.
Źródło:
Journal of KONES; 2013, 20, 3; 111-116
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comperative analysis of emision from engine fuelled with diesel and bio-diesel
Autorzy:
Koszałka, G.
Hunicz, J.
Kordos, P.
Powiązania:
https://bibliotekanauki.pl/articles/242081.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
alternative fuel
bio-diesel
exhaust emissions
Opis:
The paper presents comparative analysis of operational parameters, smoke emission and toxic components contents in exhaust gases of a compression ignition engine fuelled with fossil diesel, commercial bio-diesel (fatty acid methyl ester) and their blend. Measurements were conducted on an older generation diesel engine equipped with in-line injection pump. Engine was operated in conditions of full load rotational speed characteristic and also ESC steady-state test cycle. Fourier Transform Infrared (FTIR) analytical system provided contents of 23 exhaust gas components. In particular chosen parameters of investigated fuels (on the base of quality reports), performance and fuel consumption characteristic versus rotational speed, smoke emission (D) and content of carbon monoxide (CO), unburned hydrocarbons (THC) and nitrogen oxides (NOx), sulphur dioxide (S02) and carbon dioxide (CO2) in exhaust gas of the engine fuelled with investigated fuels, emission of specific hydrocarbons of the engine fuelled with investigated fuels, of non-regulated compounds measured during the research, molar mass of analyzed exhaust compounds are presented in the paper.
Źródło:
Journal of KONES; 2009, 16, 3; 165-171
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Potential non-toxic aqueous emulsion as a diesel fuel
Autorzy:
Haller, P.
Jankowski, A.
Kolanek, C.
Walkowiak, W.
Powiązania:
https://bibliotekanauki.pl/articles/244342.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
emulsions
water
diesel engine
nitrogen oxides
emissions
Opis:
Natural processes occurring on Earth (fires, volcanic eruptions) and human activity in the area of acquisition and processing of energy, is the cause of the continuous contaminating the atmosphere of combustion products. The combustion of fuels is and will be in the near future primary means of generating energy, including for transportation purposes. Transport is the cause of many environmental threats - emits dust and particles along with many of gaseous harmful substances and also noise and vibration. Power sources used for transport are almost exclusively equipped with internal combustion engines, among which is dominated by a diesel engines. In view of the known advantages of these motors such as high efficiency and relatively low emissions of toxic compounds in the exhaust gas, they have been accepted as the most preferred source of power motor vehicles in the coming decades, assuming that meet the requirements of future regulations regarding environmental protection. The problem to be solved in internal combustion engines is the emission of nitrogen oxides. In this paper are contained an overview of proven methods and results in the reduction of nitrogen oxides in exhaust gases by means of emulsion fuels, and forming an opinion concerning of the usefulness of such solutions in the future.
Źródło:
Journal of KONES; 2015, 22, 3; 43-48
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Researches of influence kind of piston on some parameters of the S12-U Wola diesel engine
Autorzy:
Jankowski, A.
Kołomecki, J.
Siemińska, B.
Powiązania:
https://bibliotekanauki.pl/articles/246538.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
engine testing
engine piston
composite alloys
emissions
fuel consumption
Opis:
Increased weight and greater requirements, regarding manoeuvring opportunities need extension of the power of combustion engines determining their powertrain units. In case of the family "W" engines, following developmental versions came into existence as a result of the modernization of the earlier version, among others thru the optimization of the combustion process, applying of the supercharging, as well as strengthening of the internal construction, which made it possible to carry greater thermal and mechanical loads. The subjects of the study were pistons made from composite materials of the small hysteresis of the alloy mounted on the S12-U combustion engine. In the novel construction of the piston, the outline of the overcoat was modified, the shape of the combustion chamber, the hole for the piston pin, grooves for the piston rings and shape of internal surfaces remained unchanged. A characteristic feature of the novel piston is the smaller hysteresis of the coefficient of thermal expansion composite alloy, alfa of which the pistons were made, whereas a so-called hysteresis is the difference of the coefficient alfa, which occurs during warming and piston cooling, and takes place during working of the piston in the combustion engine. The smaller hysteresis of the coefficient alfa makes the decreasing clearances between piston and cylinder possible, what has a beneficial influence on work parameters of the combustion engine, especially under conditions of partial loading of the engine. Basic parameters of the engine for the maximum torque characteristics and load characteristics are the object of the paper.
Źródło:
Journal of KONES; 2012, 19, 3; 185-194
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reducing Diesel Engine Emission using Reactivity Controlled Approach
Autorzy:
Ghazal, O. H.
Powiązania:
https://bibliotekanauki.pl/articles/124927.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
CFD
dual fuel
RRCI engine
green cars
emissions
diesel engine
Opis:
Several automobile manufacturers are interested in investigating of dual fuel internal combustion engines, due to high efficiency and low emissions. Many alternative fuels have been used in dual fuel mode for IC engine, such as methane, hydrogen, and natural gas. In the present study, a reactivity controlled compression ignition (RCCI) engine using gasoline/diesel (G/D) dual fuel has been investigated. The effect of mixing gasoline with diesel fuel on combustion characteristic, engine performance and emissions has been studied. The gasoline was injected in the engine intake port, to produce a homogeneous mixture with air. The diesel fuel was injected directly to the combustion chamber during compression stroke to initiate the combustion process. A direct injection compression ignition engine has been built and simulated using ANSYS Forte professional code. The gasoline amount in the simulation varied from (50%-80%) by volume. The diesel fuel was injected to the cylinder in two stages. The model has been validated and calibrated for neat diesel fuel using available data from the literature. The results show that the heat release rate and the cylinder pressure increased when the amount of added gasoline is between 50%-60% volume of the total injected fuels, compared to the neat diesel fuel. Further addition of gasoline will have a contrary effect. In addition, the combustion duration is extended drastically when the gasoline ratio is higher than 60% which results in an incomplete combustion. The NO emission decreased drastically as the gasoline ratio increased. Moreover, addition of gasoline to the mixture increased the engine power, thermal efficiency and combustion efficiency compared to neat diesel fuel.
Źródło:
Journal of Ecological Engineering; 2018, 19, 1; 94-103
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of aviation fuel JP-8 and diesel fuel blends on engine performance and exhaust emissions
Autorzy:
Labeckas, G.
Slavinskas, S.
Vilutienė, V.
Powiązania:
https://bibliotekanauki.pl/articles/949492.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
jet fuel
diesel fuel
autoignition
combustion
performance
exhaust emissions
Opis:
The article presents bench test results of a four-stroke, four-cylinder, naturally aspirated, DI diesel engine operating with neat JP-8 fuel (J) and its blends with Diesel fuel (D) in following proportions by volume: 90/10 (J+10D), 70/30 (J+D30), 50/ 50 (J+D50), 30/70 (J+D70), and 100% diesel fuel (DF). The purpose of the research was to analyse and compare changes occurred in the autoignition delay, combustion events, engine performance efficiency, emissions, and smoke of the exhaust when running on JP-8 fuel, jet-diesel fuel blends, and diesel fuel at a full (100%) engine load and speed of 1400 min–1 at which maximum torque occurs and rated speed of 2200 min–1. It was found that the start of injection (SOI) and the start of combustion (SOC) occurred earlier in an engine cycle and the autoignition delay decreased by 9.0% and 12.7% due to replacement of aviation JP-8 fuel with diesel fuel at a full load and the latter speeds. Maximum in-cylinder pressure was 6.8% and 4.0% higher when operating with diesel fuel, whereas brake thermal efficiency was 3.3% and 7.7% higher, and brake specific fuel consumption 2.8% and 7.0% lower when using fuel blend J+D50 compared with the respective values measured with neat JP-8 fuel. Emissions of nitric oxide (NO) and nitrogen oxides (NOx) were 13.3% and 13.1% higher from a straight diesel running at speed of 1400 min–1, and 19.0% and 19.5% higher at a higher speed of 2200 min–1. The carbon monoxide (CO) emissions and total unburned hydrocarbons (HC) decreased 2.1 times and by 12.3% when running with fuel blend J+D70 at speed of 2200 min–1 compared with those values measured with jet fuel. Smoke of the exhaust was 53.1% and 1.9% higher when using fuel blend J+D10 than that of 46.9% and 70.0% measured with jet fuel at speeds of 1400 and 2200 min–1. The engine produced 34.5% more smoke from combustion of fuel blend J+D70 at the low speed of 1400 min–1, but smoke converted to be 11.3% lower when operating at a higher speed of 2200 min–1.
Źródło:
Journal of KONES; 2015, 22, 2; 129-138
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustion, performance and exhaust emissions of the diesel engine operating on jet fuel
Autorzy:
Labeckas, G.
Slavinskas, S.
Vilutiene, V.
Powiązania:
https://bibliotekanauki.pl/articles/248056.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
jet fuel
autoignition
combustion
performance
emissions
smoke
Opis:
The article focuses on bench testing results of a four-stroke, four-cylinder, direct-injection, naturally aspirated diesel engine operating on the normal 95vol% (class C) diesel fuel + 5vol% RME (DF), F-34 jet fuel (JF) and jet fuel F-34 treated with the cetane improver (JF+0.12vol%). The purpose of the research is to investigate the availability to use of military F-34 jet fuel for land-based direct injection diesel engine powering and examine the effect of F-34 fuel and F-34 fuel treated with 0.12vol% 2-ethylhexyl nitrate on the autoignition delay, combustion, engine performance, emissions and smoke opacity of the exhausts. The peak in-cylinder gas pressure generated from JF and JF+0.12vol% is lower by 4.3% and 2.8% at 1400 min–1 speed, and 2.5% and 5.7% at 2200 min–1 speed compared to that 86.6 MPa and 82.5 MPa of the normal diesel. At rated 2200 min–1 speed, the use of treated jet fuel leads to smoother engine performance under all loads and the maximum cylinder pressure gradient lowers by 9.4% as against that 15.9 bar/deg of base diesel. The minimum brake specific fuel consumption (bsfc) for F-34 and treated F-34 fuels decreases by 4.8% and 3.5% at 1400 min–1 speed and increases by 2.7% and 3.7% at 2200 min–1 speed compared to 249.5 g/kWh and 251.8 g/kWh values of base diesel. Maximum NO emissions produced from fuels JF and JF+0.12vol% decrease by 11.5% and 7.0% at 1400 min–1, and 17.1% and 17.3% at 2200 min–1 speed compared to 1705 ppm and 1389 ppm emanating from the normal diesel. Maximum CO emissions produced from jet fuel JF and JF+0.12vol% decrease by 39.3% and 16.8% compared to that 4988 ppm produced from base diesel running at 1400 min–1 speed. At 2200 min-1 speed, the ecological effect of using fuel F-34 fuel decreases and the CO sustains over the whole load range at the same level and increases by 2.5% and 3.0% with regard to the normal diesel operating under high load. The HC emission also is lower by 78.3% and 58.8% for low and high loads compared to 230 ppm and 1820 ppm of the normal diesel running at 1400 min–1 speed. The smoke opacity ,generated from fuels JF and JF+0.12vol% sustains at lower levels over the all load range with the maximum values decreased by 14.6% and 8.1% with regard to 94.9% of the normal diesel operating at 1400 min–1 speed. The test results show that military F-34 fuel is a cleaner-burning replacement of diesel fuel and suggests fuel economy with reduced all harmful species, including NO, NO2, NOx, CO, HC, and smoke opacity of the exhausts.
Źródło:
Journal of KONES; 2012, 19, 1; 227-236
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of oxygenated diesel-n-butanol fuel blends on combustion, performance, and exhaust emissions of a turbocharged crdi diesel engine
Autorzy:
Labeckas, G.
Slavinskas, S.
Rudnicki, J.
Zadrąg, R.
Powiązania:
https://bibliotekanauki.pl/articles/259929.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
diesel engine
diesel-n-butanol blends
combustion phenomenon
performance efficiency
smoke
pollutant emissions
Opis:
The article deals with the effects made by using various n-butanol-diesel fuel blends on the combustion history, engine performance and exhaust emissions of a turbocharged four-stroke, four-cylinder, CRDI 1154HP (85 kW) diesel engine. At first, load characteristics were taken when running an engine with normal diesel fuel (DF) to have ‘baseline’ parameters at the two ranges of speed of 1800 and 2500 rpm. Four a fossil diesel (class 1) and normal butanol (n-butanol) fuel blends possessing 1 wt%, 2 wt%, 3 wt%, and 4 wt% (by mass) of n-butanol-bound oxygen fractions were prepared by pouring 4.65 wt% (BD1), 9.30 wt% (BD2), 13.95 wt% (BD3), and 18.65 wt% (BD4) n-butanol to diesel fuel. Then, load characteristics were taken when an engine with n-butanol-oxygenated fuel blends at the same speeds. Analysis of the changes occurred in the autoignition delay, combustion history, the cycle-to-cycle variation, engine efficiency, smoke, and exhaust emissions NOx, CO, THC obtained with purposely designed fuel blends was performed on comparative bases with the corresponding values measured with ‘baseline’ diesel fuel to reveal the potential developing trends.
Źródło:
Polish Maritime Research; 2018, 1; 108-120
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Okrętowe silniki tłokowe : ekologiczne i ekonomiczne rozwiązania techniczne
Maritime diesel engines : ecological and economic technical solutions
Autorzy:
Mikuła, T.
Powiązania:
https://bibliotekanauki.pl/articles/313271.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
okrętowy silnik tłokowy
silnik spalinowy
emisja zanieczyszczeń
maritime diesel engine
combustion engine
emissions
Opis:
W artykule omówione zostały metody i konstrukcje ochrony środowiska morskiego oraz na podstawie doświadczenia eksploatacyjnego przedstawiono ich zalety i wady.
Paper discussed the methods and structures of protection of the marine environment and on the basis of operational experience, their advantages and disadvantages are presented.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 6; 354-359, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of rapeseed oil blending with ethanol on engine performance and exhaust emissions
Autorzy:
Labeckas, G.
Slavinskas, S.
Pauliukas, A.
Powiązania:
https://bibliotekanauki.pl/articles/246446.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
rapeseed oil (RO)
ethanol
effective parameters
emissions
smoke opacity
Opis:
The article presents the bench testing results of a four stroke, four cylinder, direct injection, unmodified, naturally aspirated diesel engine operating on neat rapeseed oil (RO) and its 2.5vol% (ERO2.5) and 7.5vol percent (ERO7.5) blends with ethanol. The purpose of the research was to investigate the effect of ethanol inclusion in the RO and preheating temperature on bio-fuel viscosity, engine brake power, specific fuel consumption, break thermal efficiency and emission composition changes, especially NO, NO2, NOx, CO, CO2, HC and smoke opacity of the exhausts. Inclusion in the RO 2.5 and 7.5vol% of ethanol the blend viscosity at ambient temperature of 20 centigrade diminishes by 9.2 and 28.3%. During operation under constant air-to-fuel equivalence ratio gamma = 1.6, blends ERO2.5 and ERO7.5 ensure the brake mean effective pressure (bmep) lower at the maximum torque 1800 min-1 by 0.5 and 2.3% (bmep=0.770 mpa) and at rated 2200 min1 speed by 2.4 and 9.1% (bmep=0.740 mpa), correspondingly, than that of neat RO case. The bsfc at maximum torque (248.7 g/kwh) and rated power (247.5 g/kwh) for blends ERO2.5 and ERO7.5 is higher by 1.3-4.4% and 4.2-10.7% and the brake thermal efficiency lower by 0.5-1.5% and 3.3-7.6%, respectively. The tests revealed that during operation of the fully loaded engine at rated 2200 min-1 speed, ethanol inclusion in the RO up to 7.5vol% diminishes NO, nox, HC, CO2 emissions, smoke opacity and temperature of the exhausts however it may increase simultaneously NO2, NO2/NOx and CO emissions.
Źródło:
Journal of KONES; 2007, 14, 3; 331-338
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of fuel dose division on the emission of toxic components in the car Diesel engine exhaust gas
Autorzy:
Pietras, D.
Powiązania:
https://bibliotekanauki.pl/articles/259658.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
exhaust opacity
exhaust emissions
diesel engine
common rail
fuel dose division
Opis:
The article discusses the effect of fuel dose division in the Diesel engine on smoke opacity and composition of the emitted exhaust gas. The research activities reported in the article include experimental examination of a small Diesel engine with Common Rail type supply system. The tests were performed on the engine test bed equipped with an automatic data acquisition system which recorded all basic operating and control parameters of the engine, and smoke opacity and composition of the exhaust gas. The parameters measured during the engine tests also included the indicated pressure and the acoustic pressure. The tests were performed following the pre-established procedure in which 9 engine operation points were defined for three rotational speeds: 1500, 2500 and 3500 rpm, and three load levels: 25, 40 and 75 Nm. At each point, the measurements were performed for 7 different forms of fuel dose injection, which were: the undivided dose, the dose divided into two or three parts, and three different injection advance angles for the undivided dose and that divided into two parts. The discussion of the obtained results includes graphical presentation of contests of hydrocarbons, carbon oxide, and nitrogen oxides in the exhaust gas, and its smoke opacity. The presented analyses referred to two selected cases, out of nine examined engine operation points. In these cases the fuel dose was divided into three parts and injected at the factory set control parameters. The examination has revealed a significant effect of fuel dose division on the engine efficiency, and on the smoke opacity and composition of the exhaust gas, in particular the content of nitrogen oxides. Within the range of low loads and rotational speeds, dividing the fuel dose into three parts clearly improves the overall engine efficiency and significantly decreases the concentration of nitrogen oxides in the exhaust gas. Moreover, it slightly decreases the contents of hydrocarbons and carbon oxide. In the experiment the contents of nitrogen oxides markedly increased with the increasing injection advance angle for the undivided dose and that divided into two parts. This, in turn, led to the decrease of the contents of hydrocarbons and carbon oxide. Fuel dose division into two and three parts leads to the increase of smoke opacity of the exhaust gas, compared to the undivided dose.
Źródło:
Polish Maritime Research; 2016, 3; 58-63
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies