Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Design of experiments" wg kryterium: Temat


Tytuł:
Some Construction of Factorial Designs
O pewnej konstrukcji planów eksperymentów czynnikowych
Autorzy:
Szerszunowicz, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/905776.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
Design of experiments
Factorial design
Sequence of experiments
Opis:
Design of experiments methods are an important tool to improve production processes using statistical methods. Designing experiments allows to set factors of the production process as well as describe the influence of factors on the results. Furthermore, the design methods of experiments help to improve economic results of the analyzed process. The aim of this paper is the issue of choosing the optimal layout of experiments when the experimenter, because of the cost or conditions, has no possibility to implement the completion of the design of experiments. The method to determine successively points of a design will be suggested to carry out an experiment. Finally, implementation of the mentioned method will be presented for selected factorial designs.
Metody planowania eksperymentów są istotnym narzędziem doskonalenia procesów produkcyjnych wykorzystującym metody probabilisyczne i statystyczne. Planowanie eksperymentów pozwala na odpowiednie ustawienie parametrów procesu produkcyjnego oraz określenie wpływu czynników na jego wyniki. Ponadto metody planowania eksperymentów umożliwiają poprawę ekonomicznych rezultatów badanego procesu. Przedmiotem niniejszego artykułu jest zagadnienie wyboru optymalnego układu doświadczeń wówczas, gdy eksperymentator, ze względu na koszty bądź warunki, nie ma możliwości realizacji kompletnego planu doświadczeń. Zaproponowana zostanie metoda wyznaczania kolejnych punktów planu, w których należy przeprowadzić doświadczenie. Zastosowania prezentowanej metody przedstawione zostaną dla wybranych planów eksperymentów czynnikowych. Własności metody zostały sprawdzone w analizach symulacyjnych.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2013, 285
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pozyskiwanie danych i projektowanie eksperymentów w technice nurkowej
Autorzy:
Kłos, R.
Powiązania:
https://bibliotekanauki.pl/articles/366564.pdf
Data publikacji:
2005
Wydawca:
Polskie Towarzystwo Medycyny i Techniki Hiperbarycznej
Tematy:
projektowanie eksperymentów
design of experiments
Opis:
Inwestowanie w prace prowadzone metodą błądzenia przypadkowego najczęściej jest nieopłacalne, dlatego poszukiwanie optymalnych i użytecznych rozwiązań wymaga szybkiego prowadzenia efektywnych badań. W ich planowaniu pomocne mogą być metody statystyki matematycznej. Materiał zawarty w artykule opracowano w ramach pracy pt.: "System głębokowodnych nurkowań trimiksowych ".
Investing in research using the method of accidental erring is most often highly unprofitable due to the need for quick and efficient tests and decisions. That is why today scientists look for optimal and more efficacious statistical methods for research design. This paper presents the result of a project entitled: "Deep Diving Trimix System", sponsored by the Naval Academy, Gdynia.
Źródło:
Polish Hyperbaric Research; 2005, 4(13); 25-53
1734-7009
2084-0535
Pojawia się w:
Polish Hyperbaric Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Completely balanced block designs with nonuniform block dimension
Autorzy:
Ceranka, Bronisław
Powiązania:
https://bibliotekanauki.pl/articles/747485.pdf
Data publikacji:
1977
Wydawca:
Polskie Towarzystwo Matematyczne
Tematy:
Block designs,Design of experiments,Statistics
Opis:
Artykuł nie zawiera streszczenia
The article contains no abstract
Źródło:
Mathematica Applicanda; 1977, 5, 11
1730-2668
2299-4009
Pojawia się w:
Mathematica Applicanda
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A calculation model for liquid-liquid extraction of protactinium by 2,6-dimethyl-4-heptanol
Autorzy:
Knight, A. W.
Eitrheim, E. S.
Nelson, A. W.
Schultz, M. K.
Powiązania:
https://bibliotekanauki.pl/articles/146380.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
design of experiments
protactinium
solvent extraction
Opis:
Reprocessing of spent nuclear fuel usually employs the solvent extraction technique to recover fissile material, isolate other valuable radionuclides, recover precious metals, and remove contaminants. Effi cient recovery of these species from highly radioactive solutions requires a detailed understanding of reaction conditions and metal speciation that leads to their isolation in pure forms. Due to the complex nature of these systems, identification of ideal reaction conditions for the efficient extraction of specific metals can be challenging. Thus, the development of experimental approaches that have the potential to reduce the number of experiments required to identify ideal conditions are desirable. In this study, a full-factorial experimental design was used to identify the main effects and variable interactions of three chemical parameters on the extraction of protactinium (Pa). Specifi cally we investigated the main effects of the anion concentration (NO3 –, Cl–) extractant concentration, and solution acidity on the overall extraction of protactinium by 2,6-dimethyl-4-heptanol (diisobutylcarbinol; DIBC) from both HCl and HNO3 solutions. Our results indicate that in HCl, the extraction of protactinium was dominated by the solution acidity, while in nitric acid the extraction was strongly effected by the [DIBC]. Based on our results, a mathematical model was derived, that describes the relationship between concentrations of anions, extractant, and solution acidity and the expected values of Pa distribution coefficients in both HCl and HNO3. This study demonstrates the potential to predict the distribution coefficient values, based upon a mathematical model generated by a full-factorial experimental design.
Źródło:
Nukleonika; 2015, 60, No. 4, part 2; 837-845
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the search for conditions for production process optimization
Autorzy:
Szerszunowicz, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/584920.pdf
Data publikacji:
2014
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
design of experiments
response surface function
optimal design
Opis:
The experimental design methodology mainly deals with the estimation of a usually unknown response surface function. An important problem in the field of design of experiments is to determine the number of experimental trials, taking into account certain limitations resulting from the nature of the manufacturing process. The experimental design methodology also includes – as if a separate section – methods of searching for conditions for the optimization of processes and the optimal design of experiments. The aim of this paper is to present a method of searching for conditions for the optimization of manufacturing process results. The proposed method uses non-classical statistical methods and is presented for selected empirical data.
Źródło:
Mathematical Economics; 2014, 10(17); 91-102
1733-9707
Pojawia się w:
Mathematical Economics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ON THE BOOTSTRAP METHOD OF ESTIMATION OF RESPONSE SURFACE FUNCTION
Autorzy:
Szerszunowicz, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/655866.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
design of experiments
response surface function
bootstrap
Opis:
Nowadays, in many fields of science it is necessary to carry out miscellaneous analyses using classical statistical methods, which usually have correct assumptions. These assumptions in the research realities cannot always be met, which makes it impossible to carry out analyses and leads to incorrect conclusions and recommendations. The study of the production process largely consists in the use of tools of statistical quality control which are based on classical statistical methods. These methods result in some improvements in technological and economic results of the manufacturing process. One of the tools of statistical quality control is the design of experiments, whose important element is the estimation of response surface function. The aim of this paper is to present the bootstrap method of estimation of response surface function and its use for empirical data.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2014, 3, 302
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of ultimate compressive strength of cracked plates with the use of doe techniques
Autorzy:
Woloszyk, Krzysztof
Garbatov, Yordan
Powiązania:
https://bibliotekanauki.pl/articles/1585013.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
cracks
Design of Experiments
plate
ultimate strength
FEM
Opis:
The objective of this work is to investigate the structural compressive response of plates with locked cracks accounting for all relevant factors and correlation between them. The nonlinear FE model considering both geometric and material nonlinearities is employed herein, and the FE model of the structural response of intact plates is validated with the available experimental data. In the common studies, based on One Factor at a Time analysis, some of the parameters and interactions between them are excluded. In the present study, the numerical investigations are conducted with the use of the Design of Experiments techniques, where all essential parameters and their interactions are adequately considered. With a total of 32 numerical analyses, the most influential factors and their interactions are identified. As a study outcome, empirical formulations, which allow for a fast estimation of the ultimate compressive strength of intact plates, plates with locked cracks, and repaired cracked plates, are derived. The developed formulations represent a fast and practical tool for estimating the ultimate compressive strength of intact, cracked, and repaired plates, which can be easily employed in the reliability analysis.results followed by their discussion.
Źródło:
Polish Maritime Research; 2020, 3; 109-120
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Statistical approach to the production of cement composites doped with ZnO and ZnO-based materials
Autorzy:
Klapiszewska, Izabela
Balicki, Sebastian
Wilk, Kazimiera A.
Klapiszewski, Łukasz
Ślosarczyk, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/24085675.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cement composite
zinc oxide
hybrid materials
design of experiments
Opis:
In this study, physical and functional properties of the cement composites containing ZnO, ZnO/lignin and lignin admixtures were investigated using Response Surface Methodology (RSM). The I-optimal design based on RSM was used to assess the influence of ZnO-based doping agent, of either commercial or synthetic origin, on cement composite production in the function of average compressive strength and cost. Polynomial mathematical models were developed by RSM confronting results from the experimental design. The accuracy and precision of the utilized models established by I-optimal design were tested using Analysis of Variance (ANOVA). The first stage of formulation optimization revealed that the use of commercially available ZnO-based admixture no. 4 (ZnO-SA, supplied by Sigma Aldrich) allowed to achieve the desired results, passing all the requirements, i.e., the best microbial purity combined with reasonable cost, followed by satisfactory physical properties. In the second stage of formulation optimization, the influence of implementing the hybrid materials, i.e., ZnO-SA mixed in different proportions with lignin was evaluated. RSM revealed that doping admixture no. 3, i.e., ZnO-SA/lignin (5:1), is the best candidate, which comprised augmented functional and physical properties of the fabricated cement composite. This component exhibited the best microbial purity as well as the lowest total pore volume, followed by satisfactory physical properties. Verification of the model findings indicated considerable agreement between the predicted and experimental values. From the findings, it was confirmed that a reasonable cost-performance balance for cement composites can be achieved using ZnO-SA and ZnO-SA/lignin (5:1).
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 4; art. no. 168352
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultimate compressive strength assessment of uncleaned and cleaned corroded plates with locked crack
Autorzy:
Woloszyk, Krzysztof
Garbatov, Yordan
Powiązania:
https://bibliotekanauki.pl/articles/1955587.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
cracks
corrosion
Design of Experiments
plate
ultimate strength
FEM
Opis:
The work presented here investigates the structural response of cleaned corroded plates, subjected to compressive load in the presence of a locked crack, where the change of mechanical properties as a result of corrosion development and the cleaning process is also accounted for. A Finite Element model for assessing the compressive strength, considering geometric and material nonlinearities, is developed, and the analysed plates are compared with the available experimental data. An experimental design plan is generated using the Design of Experiments techniques, which quantifies the influence of the governing variables and their interactions with respect to the plate’s ultimate compressive strength. With a limited number of observations, the most significant effects are identified. The corrosion degradation is revealed to be the most crucial effect leading to an effective strength reduction. It was found that, in the case of a corroded plate with a locked crack subjected to a compressive load, the most severe case is when the crack is transversely oriented. The strength reduction is slightly lower than when the corrosion degradation and the presence of a crack are considered to be a simple summation of these two effects but acting separately. The outcome of the analysis is the development of several empirical formulations that allow a fast estimation of the ultimate strength of a corroded plate, subjected to compressive load in the presence of a locked crack, accounting for different cleaning.
Źródło:
Polish Maritime Research; 2021, 3; 117-127
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Welding Parameters on FSSW: Experimental and Numerical Study
Autorzy:
Merzoug, M.
Boulenouar, A.
Bouchouicha, B.
Serrier, M.
Mazari, M.
Powiązania:
https://bibliotekanauki.pl/articles/355978.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FSSW
penetration
rotation of the tool
temperature
design of experiments
Opis:
In this paper, the Aluminum A6060-T5 plates of thickness 2 mm was friction stir spot welded (FSSW), and the effects of welding parameters (rotation speed, plunge speed and distance from the center of pin) on the temperature variation of the joints were investigated. The experimental design method is used to investigate the effects of welding parameters in order to achieve an optimization of the FSSW process. This optimization allows the development of experimental results and may help to better understand the complexity of the phenomena resulting from contact parts/tool during the stirring process.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 247-256
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies