Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "DC/DC converter" wg kryterium: Temat


Tytuł:
A High Gain Single Switch DC-DC Converter with Double Voltage Booster Switched Inductors
Autorzy:
Addagatla, Nagaraju
Boini, Rajender
Powiązania:
https://bibliotekanauki.pl/articles/2201925.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
multilevel converter
boost converter
DC-DC converter
high gain converters
Opis:
The research for novel power conversion topologies and the development of cutting-edge power component technologies are driven by the demand for renewable and much more efficient electricity generation, delivery, and conversion. Simulation and Analysis High Voltage Gain DC-DC Converter with Double Voltage Booster Switched Inductor for PV Applications are analyzed in this paper. Multilevel boost converter topologies recently reintroduced, are gaining popularity as a solution for industrial and transportation power systems because they enable the use of innovative, efficient, but relatively low voltage low-voltage devices at greater voltage and power levels. there is only one power switch on the converter that is planned here, three diodes, two capacitors, and two inductors to achieve ultra-high gain with better efficiency. High voltage gain, minimal switch stress, and the ability to lessen input-current ripple and capacitor voltage ripple are all benefits of the topology. When it switches complementary, the capacitors' ripple is reduced, which lowers the size requirement for the capacitors. A 12V, 500 watts prototype was analyzed, simulated and designed. at a duty cycle of 0.75 it is achieved high DC-DC gain i.e 19 and efficiency 93%. The practicality of the converter will be demonstrated by the close agreement between the analysis and simulation findings.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 2; 1--11
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Novel Intelligent Neural Network Techniques of UPQC with Integrated Solar PV System for Power Quality Enhancement
Autorzy:
Rudraram, Ramesh
Chinnathambi, Sasi
Mani, Manikandan
Powiązania:
https://bibliotekanauki.pl/articles/27311926.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
PV system
Re-lift Luo DC-DC converter
Cascaded ANN MPPT
Adaptive PI controller
CNN assisted dq theory
Opis:
A Novel Intelligent control of a Unified Power Quality Conditioner (UPQC) coupled with Photovoltaic (PV) system is proposed in this work. The utilization of a Re-lift Luo converter in conjunction with a Cascaded Artificial Neural Network (ANN) Maximum Power Point Tracking (MPPT) method facilitates the optimization of power extraction from PV sources. UPQC is made up of a series and shunt Active Power Filter (APF), where the former compensates source side voltage quality issues and the latter compensates the load side current quality issues. The PV along with a series and shunt APFs of the UPQC are linked to a common dc-bus and for regulating a dc-bus voltage a fuzzy tuned Adaptive PI controller is employed. Moreover, a harmonics free reference current is generated with the aid of CNN assisted dq theory in case of the shunt APF. The results obtained from MATLAB simulation.
Źródło:
International Journal of Electronics and Telecommunications; 2023, 69, 3; 605--613
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Boosting resonant switched-capacitor voltage tripler
Autorzy:
Chojowski, Maciej
Sosnowski, Robert
Baszyński, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/24202737.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
boost topology
DC–DC converters
switched capacitor converter
Opis:
This elaboration presents the concept of a unidirectional DC–DC switchedcapacitor converter operating as a voltage tripler. The system consists of two resonant cells with switched capacitors and chokes. This proposed converter topology achieves low voltages on semiconductor switches (diodes and transistors) compared to the classic SC series-parallel converter or the boost topology. The output voltage on the capacitors is reduced in the proposed converter because it is divided into two series-connected capacitors with asymmetric distribution. The presented results describe the analytical description of the system operation and the analytical equation for semiconductor currents. A simulation and experimental results have been performed. The system efficiency and three voltage gain values were measured in the experimental setup. The efficiency measured was also compared with the analytical determination curve for loss analysis and further converter optimization.
Źródło:
Archives of Electrical Engineering; 2023, 72, 2; 373--389
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of an open-switch fault detection algorithm for a three-phase interleaved DC–DC boost converter in a photovoltaic system
Autorzy:
Boudjellal, Bilal
Benslimane, Tara
Powiązania:
https://bibliotekanauki.pl/articles/27309944.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
DC–DC converters
fault diagnosis
interleaved boost converter
open switch fault
photovoltaic (PV) system
Opis:
This paper presents a novel fault detection algorithm for a three-phase interleaved DC–DC boost converter integrated in a photovoltaic system. Interleaved DC–DC converters have been used widely due to their advantages in terms of efficiency, ripple reductions, modularity and small filter components. The fault detection algorithm depends on the input current waveform as a fault indicator and does not require any additional sensors in the system. To guarantee service continuity, a fault tolerant topology is achieved by connecting a redundant switch to the interleaved converter. The proposed fault detection algorithm is validated under different scenarios by the obtained results.
Źródło:
Archives of Electrical Engineering; 2023, 72, 3; 661--676
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Analysis of a Transformerless Dual Active Half-Bridge Converter
Autorzy:
Sosnowski, Robert
Chojowski, Maciej
Baszyński, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2175937.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
DC-DC converter
bidirectional converter
phase-shift control
zero voltage transient
Opis:
This paper proposes a transformerless dual half-bridge converter (TLDAHB). By eliminating the transformer and harnessing the possibility of using a low inductor value, it is possible to minimise the size of the converter. A phase-shift pulse width modulation will result in a wide controlled voltage gain of the converter and operation as buck and boost. The theoretical topology analysis, simulation, and experimental results are presented. Theoretical analysis consists of analysis of power transfer and design. In case of experimental research, particular attention was paid to power transfer and efficiency analysis. Near zero switching transient of voltage in the half-bridge topology results with high efficiency.
Źródło:
Power Electronics and Drives; 2022, 7, 42; 146--158
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extended Feedback Linearisation Control of Non-ideal DCDC Buck Converter in Continuous-conduction Mode
Autorzy:
Csizmadia, Miklos
Kuczmann, Miklos
Powiązania:
https://bibliotekanauki.pl/articles/2175943.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
DC-DC buck converter
feedback linearisation
inrush current
parasitics
Ackermann
Opis:
This paper presents an extended form of Feedback Linearisation Control (FBLC), which is tested in a non-ideal buck converter in Continuous-conduction Mode (CCM). The FBLC is often used in power electronics to control a non-linear system, due to its advantageous properties. The application of the error integrator shows better steady-state and transient properties, such as a decrease of inrush current. The linearised system has been controlled by the pole placement and the technique is illustrated through an example and simulated via Matlab. The results have been compared by using a classical PID controller, allowing the benefits of FBLC to be highlighted.
Źródło:
Power Electronics and Drives; 2022, 7, 42; 1--8
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Precision Calculations of the Characteristic Impedance of Complex Coaxial Waveguides Used in Wideband Thermal Converters of AC Voltage and Current
Autorzy:
Kubiczek, Krzysztof
Kampik, Marian
Powiązania:
https://bibliotekanauki.pl/articles/2124756.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AC voltage standard
current shunt
characteristic impedance
multilayer cylindrical conductor
FEM simulation
modified Bessel functions
numerical stability
calorimetric thermal voltage converter
ac-dc transfer difference
Opis:
The article presents precision and numerically stable method of calculation of the characteristic impedance of cylindrical multilayer waveguides used in high-precision wideband measuring instruments and standards, especially calculable thermal converters of AC voltage and precision wideband current shunts. Most of currently existing algorithms of characteristic impedance calculation of such waveguides are based upon approximations. Unfortunately, application of such methods is limited to waveguides composed of a specific, usually low number of layers. The accuracy of approximation methods as well as the number of layers is sometimes not sufficient, especially when the coaxial waveguide is a part of precision measurement equipment. The article presents the numerically stable matrix analytical formula using exponentially scaled modified Bessel functions to compute characteristic impedance and its components of the cylindrical coaxial multilayer waveguides. Results obtained with the developed method were compared with results of simulations made using the Finite Element Method (FEM) software simulations. Very good agreement between results of those two methods were achieved.
Źródło:
International Journal of Electronics and Telecommunications; 2022, 68, 3; 527--533
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel quasi-resonant ZVS boost converter with tapped inductor
Autorzy:
Dawidziuk, Jakub
Harasimczuk, Michał
Powiązania:
https://bibliotekanauki.pl/articles/2090704.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tapped inductor
boost converter
DC/DC converter
zero voltage switching
induktor gwintowany
wzmacniacz
przetwornica DC/DC
przełączanie przy zerowym napięciu
Opis:
The purpose of this paper is to propose a model of a novel quasi-resonant boost converter with a tapped inductor. This converter combines the advantages of zero voltage quasi-resonant techniques and different conduction modes with the possibility of obtaining a high voltage conversion ratio by using a tapped inductor, which results in high converter efficiency and soft switching in the whole output power range. The paper contains an analysis of converter operation, a determination of voltage conversion ratio and the maximum voltage across power semiconductor switches as well as a discussion of control methods in discontinuous, critical, and continuous conduction modes. In order to verify the novelty of the proposed converter, a laboratory prototype of 300 W power was built. The highest efficiency η = 94.7% was measured with the output power Po = 260 W and the input voltage Vin = 50 V. The lowest efficiency of 90.7% was obtained for the input voltage Vin = 30 V and the output power Po = 75 W. The model was tested at input voltages (30–50) V, output voltage 380 V and maximum switching frequency 100 kHz.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; e136043, 1--11
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel quasi-resonant ZVS boost converter with tapped inductor
Autorzy:
Dawidziuk, Jakub
Harasimczuk, Michał
Powiązania:
https://bibliotekanauki.pl/articles/2173568.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tapped inductor
boost converter
DC/DC converter
zero voltage switching
induktor gwintowany
wzmacniacz
przetwornica DC/DC
przełączanie przy zerowym napięciu
Opis:
The purpose of this paper is to propose a model of a novel quasi-resonant boost converter with a tapped inductor. This converter combines the advantages of zero voltage quasi-resonant techniques and different conduction modes with the possibility of obtaining a high voltage conversion ratio by using a tapped inductor, which results in high converter efficiency and soft switching in the whole output power range. The paper contains an analysis of converter operation, a determination of voltage conversion ratio and the maximum voltage across power semiconductor switches as well as a discussion of control methods in discontinuous, critical, and continuous conduction modes. In order to verify the novelty of the proposed converter, a laboratory prototype of 300 W power was built. The highest efficiency η = 94.7% was measured with the output power Po = 260 W and the input voltage Vin = 50 V. The lowest efficiency of 90.7% was obtained for the input voltage Vin = 30 V and the output power Po = 75 W. The model was tested at input voltages (30–50) V, output voltage 380 V and maximum switching frequency 100 kHz.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; art. no. e136043
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel two-phase interleaved parallel bi-directional DC/DC converter
Autorzy:
Zhang, Baoge
Hong, Deyu
Wang, Tianpeng
Zhang, Zhen
Wang, Donghao
Powiązania:
https://bibliotekanauki.pl/articles/1841340.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bi-directional DC/DC converter
energy storage system
interleaved parallel structure
voltage stress
Z-source network
dwukierunkowy przetwornik DC/DC
system magazynowania energii
przeplatana struktura równoległa
stres napięciowy
Sieć źródłowa Z
Opis:
The energy storage system (ESS) is an important way to improve the power quality of renewable energy sources (such as solar energy and wind energy). A bi-directional DC/DC converter is an essential part of the ESS to achieve bi-directional energy transfer. According to the characteristics of the low-voltage gain and high-voltage stress of switches in the existing bi-directional DC/DC converter, this study proposes a novel two-phase interleaved parallel bi-directional DC/DC converter. The converter can effectively combine the advantages of a Z-source network and interleaved parallel structure. The working principle, the boost mode and buck mode of the converter are analyzed in detail. In addition, the voltage conversion ratios under the two modes are deduced. The control strategy of the two-phase interleaved parallel bi-directional DC/DC converter is introduced in detail. Furthermore, the main working waveforms of the system under each working mode are verified by building a simulation experiment model using MATLAB/Simulink. The simulation results show that the system has advantages of high-voltage gain, low-voltage stress of switches and automatic current sharing between inductors.
Źródło:
Archives of Electrical Engineering; 2021, 70, 1; 219-231
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Areview of currently used isolated DC-DCconverters
Przegląd obecnie wykorzystywanych izolowanych przetwornic prądu stałego
Autorzy:
Dobrzański, Damian
Powiązania:
https://bibliotekanauki.pl/articles/2070232.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
DC-DC power converters
soft switching
electric vehicles charger
LLC resonant converter
przetwornice DC-DC
miękka komutacja
ładowarki pojazdów elektrycznych
przetwornica rezonansowa LLC
Opis:
This paper presents a review of the most popular isolated DC-DC converters topologies. Presented solutions are divided to two main groups. First–unidirectional soft switched isolated DC-DC converters and the second one–bidirectional soft switched isolated DC-DC converters. It introduced also a two main DC-DC converters control methods.The collected results of research, simulations and tests of individual solutions carried out with different assumptions allowed for the preparation of a summary. The formulated conclusions can define the direction of development of resonant converters and a specific starting point for further research on control algorithms as well as improving the efficiency of DCconverters.
W artykule przedstawiono przegląd najpopularniejszych topologii izolowanych przetwornic prądu stałego. Zaprezentowane rozwiązania podzielone zostały na dwie główne grupy. Pierwsza–jednokierunkowe izolowane przetwornice prądu stałego pozwalające na osiągnięcie miękkiej komutacji, druga–dwukierunkowe izolowane przetwornice prądu stałegoosiągające posiadające możliwość pracy w trybie miękkiego przełączania. Zebrane wyniki badań, symulacji oraz testów poszczególnych rozwiązań przeprowadzanych przy odmiennych założeniach pozwoliły na opracowanie podsumowania. Sformułowane wnioski mogą definiować kierunekrozwoju przetwornic rezonansowych oraz swoisty punkt wyjścia do dalszych badań nad algorytmami sterowania jak i poprawą efektywności przetwornic prądu stałego.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2021, 11, 3; 50--54
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dwustopniowy przekształtnik AC/DC z wysokoczęstotliwościowym transformatorem separującym dedykowany do szybkiego ładowania pojazdów elektrycznych
Two-stage AC /DC converter with a high-frequency isolating transformer, dedicated to fast charging of electric vehicles
Autorzy:
Załęski, Jarosław
Piasecki, Szymon
Stępień, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2056404.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
ładowarka EV
przetwornica DC/DC
szybka ładowarka DC
przekształtnik dwustopniowy
EV charger
DC/DC converter
DC fast charger
two-stages AC/DC converter
Opis:
Artykuł przedstawia moduł przekształtnika energoelektronicznego składającego się ze stopni AC/DC i DC/DC. Opracowany i wdrożony przez firmę Zakład Energoelektroniki Twerd Sp. z o.o. układ o mocy 50 kW zapewnia separację galwaniczną między obwodami AC i DC poprzez wysokoczęstotliwościowy transformator i dedykowany jest układom szybkiego ładowania pojazdów elektrycznych. W artykule przedstawiono koncepcję szybkiego ładowania pojazdów elektrycznych, założenia projektowe dla opracowanego urządzenia oraz jego podstawowe właściwości i funkcjonalności. Wykonane prace projektowe zostały zilustrowane odpowiednimi wynikami badań eksperymentalnych. Przedstawiono także aplikację przemysłową urządzenia w postaci wykonanej i uruchomionej stacji ładowania pojazdów elektrycznych.
The article presents a power electronic module consisting of AC/DC and DC/DC converters. Developed and implemented by Zakład Energoelektroniki Twerd Sp. z o.o. the 50 kW module provides galvanic separation between AC and DC circuits through a high-frequency transformer and is dedicated to electric vehicle fast charging systems. The article presents the concept of fast charging of electric vehicles, design assumptions for the developed device and its basic properties and functionality. The performed design works were illustrated with the relevant results of experimental studies. The industrial application of the device in the form of a constructed and launched electric vehicle charging station was also presented.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2021, 2, 126; 41--46
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eksperymentalne porównanie modułów ładowania pojazdów elektrycznych wykonanych w technologii krzemowej i węglika krzemu
Experimental comparison of EV charging modules with silicon and silicon carbide power transistors
Autorzy:
Piasecki, Szymon
Załęski, Jarosław
Jasiński, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2056411.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
ładowarka EV
szybka ładowarka DC
SiC MOSFET
Si IGBT
wysoka sprawność
przekształtnik dwustopniowy AC-DC
EV charger
DC/DC
fast DC charger
high efficiency
two-stages AC/DC converter
Opis:
Artykuł przedstawia porównanie sprawności modułów ładowarek o mocy 50 kW, składających się z przekształtników AC/DC i DC/DC. Zaprezentowane moduły zostały opracowane i wdrożone przez firmę Zakład Energoelektroniki Twerd Sp. z o.o. jako moduły szybkiego ładowania pojazdów elektrycznych zapewniające separację galwaniczną między obwodami AC i DC poprzez wysokoczęstotliwościowy transformator. Pierwszy z modułów wykonany jest w tradycyjnej technologii krzemowej (tranzystory IGBT) i topologii umożliwiającej jednokierunkowy przesył energii. Drugi moduł w swojej konstrukcji wykorzystuje tranzystory mocy z węglika krzemu (SiC) i umożliwia dwukierunkowy transfer energii. W artykule przybliżono topologie analizowanych przekształtników oraz zaprezentowano eksperymentalne porównanie sprawności obu modułów współpracujących z baterią pojazdu elektrycznego.
The article presents a comparison of the efficiency of 50 kW charger modules, consisting of AC/DC and DC/DC converters. The presented modules were developed and implemented by Zakład Energoelektroniki Twerd Sp. z o.o. as fast charging modules for electric vehicles ensuring galvanic separation between AC and DC circuits through a high-frequency transformer. The first module is made in traditional silicon technology (IGBT transistors) and a topology that enables unidirectional energy transfer. The second module uses silicon carbide (SiC) power transistors in its design and enables bi-directional energy transfer. The article presents the topologies of the analyzed converters and presents an experimental comparison of the efficiency of both modules cooperating with the electric vehicle battery.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2021, 2, 126; 47--52
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High quality repetitive control system for a grid-tied converter under distorted grid voltage conditions – design and implementation
Autorzy:
Ufnalski, Bartlomiej
Straś, Andrzej
Grzesiak, Lech M.
Powiązania:
https://bibliotekanauki.pl/articles/2090719.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AC/DC power converter
current control
particle swarm optimization
power quality
repetitive control
RC
przetwornica mocy AC/DC
kontrola prądu
optymalizacja roju cząstek
jakość prądu
kontrola powtarzalna
Opis:
The paper features a grid-tied converter with a repetitive current controller. Our goal here is to demonstrate the complete design workflow for a repetitive controller, including phase lead, filtering and conditional learning. All key parameters, i.e., controller gain, filter and fractional phase lead, are designed in a single optimization procedure, which is a novel approach. The description of the design and optimization process, as well as experimental verification of the entire control system, are the most important contributions of the paper. Additionally, one more novelty in the context of power converters is verified in the physical system – a conditional learning algorithm to improve transient states to abrupt reference and disturbance changes. The resulting control system is tested experimentally in a 10 kW converter.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 2; e136739, 1--11
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High quality repetitive control system for a grid-tied converter under distorted grid voltage conditions – design and implementation
Autorzy:
Ufnalski, Bartlomiej
Straś, Andrzej
Grzesiak, Lech M.
Powiązania:
https://bibliotekanauki.pl/articles/2173606.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AC/DC power converter
current control
particle swarm optimization
power quality
repetitive control
RC
przetwornica mocy AC/DC
kontrola prądu
optymalizacja roju cząstek
jakość prądu
kontrola powtarzalna
Opis:
The paper features a grid-tied converter with a repetitive current controller. Our goal here is to demonstrate the complete design workflow for a repetitive controller, including phase lead, filtering and conditional learning. All key parameters, i.e., controller gain, filter and fractional phase lead, are designed in a single optimization procedure, which is a novel approach. The description of the design and optimization process, as well as experimental verification of the entire control system, are the most important contributions of the paper. Additionally, one more novelty in the context of power converters is verified in the physical system – a conditional learning algorithm to improve transient states to abrupt reference and disturbance changes. The resulting control system is tested experimentally in a 10 kW converter.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 2; art. no. e136739
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies