Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "CO sensor" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Nanostructured CdO thin films for LPG and CO2 gas sensor prepared by spray pyrolisis technique
Autorzy:
Bari, R. H.
Patil, S. B.
Powiązania:
https://bibliotekanauki.pl/articles/411726.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
spray pyrolysis techniques
LPG
CO2 sensor
nanostructured CdO
gas response
Opis:
Nanostructured CdO thin films were deposited by spray pyrolysis techniques at different spray deposition time on glass substrates. Nanostructured CdO thin films was prepared using 0.05 M of cadmium acetate dehydrate (CH3COO) 2Cd•2H2O) was dissolved in the deionised water. These thin films were annealing in air at temperatures 500 °C for 60 min. The thickness of the films, crystallite and grain size were observed to increase with the increase in spray deposition time. As prepared thin films were characterized using XRD, FE-SEM and EDAX. The XRD analysis shows that CdO films were cubic structured. The electrical and gas sensing properties of these films were investigated. Prepared nanostructure CdO thin films show LPG (S = 1600) and CO2 (S = 435) gas response at different operating temperature. Gas response, selectivity, response and recovery time of the sensor were measured and presented.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 18; 31-46
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and activity evaluation of Ce-Mn-Cu mixed oxide catalyst for selective oxidation of co in automobile engine exhaust: effect of Ce/Mn loading content on catalytic activity
Autorzy:
Bilal, Yasir
Nasir, Muhammad Ali
Nasreen, Sadia
Akhter, Niaz Ahmed
Pasha, Riffat Asim
Noor, Muhammad Farhan
Powiązania:
https://bibliotekanauki.pl/articles/101992.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
base metal oxide catalyst
catalytic converter
CO sensor
CO-precipitation
catalytic activity
katalizator tlenku metalu zasadowego
katalizator
czujnik CO
strącanie CO
aktywność katalityczna
Opis:
A series of Mn-doped CeO2-CuO catalyst (CeO2-MnOx-CuO) (Ce/Mn molar ratio of 0.5, 1.0 2.0 and 3.0) were prepared using co-precipitation method for the selective oxidation of CO in automobile engine exhaust. The content of copper was 5.0 wt. % in each sample. Catalysts were installed on the automobile engine exhaust and CO amount was recorded with help of CO sensor, with and without the catalyst. The catalytic converter efficiency was estimated for each catalyst through efficiency formula. It was observed that Ce/Mn catalyst with a molar ratio of 2.0 shows the maximum efficiency (88.35%). Stability of conversion process was analyzed by plotting the CO amount with respect to time. The catalyst with Ce/Mn molar ratio of 2.0 performed the most streamline conversion process with least deviations.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 1; 260-266
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Virtual test bed for maritime safety assessment
Autorzy:
Hahn, A.
Gollücke, V.
Buschmann, C.
Schweigert, S.
Powiązania:
https://bibliotekanauki.pl/articles/135126.pdf
Data publikacji:
2015
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
virtual test bed
co-simulation
e-Navigation
maritime traffic simulation
safety assessment
sensor simulation
hardware in the loop
software in the loop
model in the loop
Opis:
“Safe voyage from berth to berth”: This is the goal of all e-Navigation strains driven by new technologies, new infrastructures, and new organizational structures on bridge, on shore, as well as in the cloud. To facilitate these efforts suitable engineering and safety/risk assessment methods are required. Understanding maritime transportation as a sociotechnical system allows the usage of system-engineering methods. Simulation-based test beds for verification and validation (V +V) of e-Navigation technologies are important methods to obtain functional safety and reliability. The modeling and simulation toolset HAGGIS is a cosimulation system for the evaluation of e-Navigation concepts and systems. It provides a maritime traffic simulator and a physical world (n-body) simulator and services for finding rare events of failures. HAGGIS is accompanied by the physical test bed LABSKAUS, which implements a reference port and waterways. This paper describes an integrated and seamless approach for developing new e-Navigation technologies starting with virtual simulation-based safety assessment and ending in physical real-world demonstrations. It gives an overview of the actual test bed and introduces requirements, concepts and elements of HAGGIS and LABSKAUS, which are joined in the e-Maritime Integrated Reference Platform (eMIR) test bed.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2015, 44 (116); 116-122
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical and Experimental Analysis of the Response of a SAW Structure with WO3 Layers on Action of Carbon Monoxide
Autorzy:
Hejczyk, T.
Urbańczyk, M.
Pustelny, T.
Jakubik, W.
Powiązania:
https://bibliotekanauki.pl/articles/176885.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas sensor
carbon monoxide (CO)
piezoelectric substrate
numerical modeling
surface acoustic waves
acoustoelectric effects
Ingebrigtsen's formula
Opis:
The paper presents the results of an analysis of gaseous sensors based on a surface acoustic wave (SAW) by means of the equivalent model theory. The applied theory analyzes the response of the SAW sensor in the steady state affected by carbon monoxide (CO) in air. A thin layer of WO3 has been used as a sensor layer. The acoustical replacing impedance of the sensor layer was used, which takes into account the profile of the concentration of gas molecules in the layer. Thanks to implementing the Ingebrigtsen equation, the authors determined analytical expressions for the relative changes of the velocity of the surface acoustic wave in the steady state. The results of the analysis have shown that there is an optimum thickness of the layer of CO sensor at which the acoustoelectric effect (manifested here as a change in the acoustic wave velocity) is at its highest. The theoretical results were verified and confirmed experimentally.
Źródło:
Archives of Acoustics; 2015, 40, 1; 19-24
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
In Situ Measurements of Atmospheric CO And Its Correlation With Nox And O3 at a Rural Mountain Site
Autorzy:
Li, J.
Reiffs, A.
Parchatka, U.
Fischer, H.
Powiązania:
https://bibliotekanauki.pl/articles/221507.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
trace gas measurements
atmospheric CO
QCL sensor
sources relation
sources identification
Opis:
Ambient concentrations of CO, as well as NOx and O3, were measured as a part of the PARADE campaign conducted at the Taunus Observatory on the summit of the Kleiner Feldberg between the 8th of August and 9th of September 2011. These measurements were made in an effort to provide insight into the characteristics of the effects of both biogenic and anthropogenic emissions on atmospheric chemistry in the rural south-western German environment. The overall average CO concentration was found to be 100.3±18.1 ppbv (within the range of 71 to 180 ppbv), determined from 10-min averages during the summer season. The background CO concentration was estimated to be ~90 ppbv. CO and NOx showed bimodal diurnal variations with peaks in the late morning (10:00-12:00 UTC) and in the late afternoon (17:00-20:00 UTC). Strong correlations between CO and NOx indicated that vehicular emission was the major contributor to the notable CO plumes observed at the sampling site. Both local meteorology and backward trajectory analyses suggest that CO plumes were associated with anthropogenically polluted air masses transferred by an advection to the site from densely populated city sites. Furthermore, a good linear correlation of R2 = 0.54 between CO and O3 (∆O3/∆CO=0.560±0.016 ppbv/ppbv) was observed, in good agreement with previous observations.
Źródło:
Metrology and Measurement Systems; 2015, 22, 1; 25-38
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies