Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "62.20.Qp" wg kryterium: Temat


Tytuł:
Effect of aluminum addition to Nb-Al-C-N coatings on AISI M2 steel obtained by thermo-reactive deposition technique
Autorzy:
Abakay, E.
Sen, S.
Sen, U.
Powiązania:
https://bibliotekanauki.pl/articles/1061918.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.40.Gh
81.40.Ef
62.20.Qp
81.05.-t
Opis:
In this study, aluminum-doped (1 and 2 wt.%) and Al-free niobium carbo-nitride coatings were applied to the surface of AISI M2 high speed steel using the process of thermo-reactive deposition technique (TRD) at 1000°C during 1-4 h. The obtained coatings were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis and micro hardness test. Nb-Al-C-N layers were compact and homogeneous. X-ray diffraction analysis has shown that the major phases formed in the coating layer are Nb₂CN and NbN. The depth of the coating layer had increased with the treatment time and ranged from 6.65 to 9.05 μm. The measured values of the hardness of the coating layers were ranging between 2136 and 2636 HK_{0.005}.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 653-655
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microhardness and the Young Modulus of Thin, MBE-Grown, (Sn,Mn)Te Layers Containing up to 8% of Mn
Autorzy:
Adamiak, S.
Zięba, M.
Minikayev, R.
Reszka, A.
Taliashvili, B.
Szuszkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/1033220.pdf
Data publikacji:
2017-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.20.de
62.20.Qp
68.60.Bs
Opis:
The thin layers of (Sn,Mn)Te solid solution were grown by molecular beam epitaxy onto (111)-oriented BaF₂ substrates and characterized by scanning electron microscopy, atomic force microscopy, energy dispersive X-ray spectrometry, and X-ray diffraction methods. The epitaxial character of the growth was confirmed. All the layers exhibited a regular (fcc) structure of the rock-salt type and were (111)-oriented, their thickness was close to about 1 μm. The layers contained up to 8% of Mn. The microhardness and the Young modulus values were determined by the nanoindentation measurements. The Berkovich type of the intender was applied, the maximum applied load was equal to 1 mN. The results of measurements demonstrated a lack of the composition dependence of the Young modulus value. A slight increase of the microhardness value with an increasing Mn content in the (Sn,Mn)Te solid solution was observed.
Źródło:
Acta Physica Polonica A; 2017, 132, 2; 347-350
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nanomechanical properties of different dental restorative materials
Autorzy:
Altan, H.
Bilgic, F.
Arslanoglu, Z.
Kale, E.
Köroğlu Kale, A.
Altan, A.
Sahin, O.
Powiązania:
https://bibliotekanauki.pl/articles/1068227.pdf
Data publikacji:
2016-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.20.-x
62.20.Qp
Opis:
The aim of this study is to determine the hardness and roughness of glass ionomer cement, glass carbomer, and compomer by nanoindentation. Three different dental restorative materials: glass ionomer cement, glass carbomer cement, and compomer were used. Disc specimens (10 mm × 1 mm) were prepared from each material using teflon mold. All specimens were light cured according to the manufacturer's instructions. The specimens were then mounted in polyacrilic resin. After grinding and polishing the specimens were stored in distilled water at 37°C for 1 day. The specimens were investigated using nanoindenter. The highest nanohardness was measured for glass ionomer cement and the lowest for glass carbomer. Regarding roughness, glass ionomer cement and compomer showed the highest mean values. Glass ionomer cement and compomer exhibited similar nanomechanical properties. Glass carbomer had superior ability to be polished up.
Źródło:
Acta Physica Polonica A; 2016, 130, 1; 394-396
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Third-generation LED LCU on Nanomechanical Properties of Orthodontic Adhesives
Autorzy:
Bilgic, F.
Altan, H.
Akinci Sözer, Ö.
Arslanoglu, Z.
Kale, E.
Özarslan, S.
Powiązania:
https://bibliotekanauki.pl/articles/1031919.pdf
Data publikacji:
2017-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.20.-x
62.20.Qp
Opis:
The aim of this study was to compare the hardness and elastic modulus of orthodontic adhesives cured with different light-curing units, based on light-emitting diodes. Standardized samples of orthodontic adhesives, Transbond™ XT, Opal® Bond™ and Light Bond™ were prepared in cylinder blocks and cured for three seconds with Valo Ortho LED (Ultradent Products, South Jordan, Utah) and Valo LED High-Power Mode. After grinding and polishing, specimens were stored in distilled water at 37°C for one day. Specimens were investigated using nanoindenter. Employment of Valo Ortho unit has resulted in significantly higher elastic modules for Transbond™ XT (p=0.041). The highest nanohardness and elastic modules were measured for Transbond™ XT cured with Valo Ortho (9.47 GPa; 81.85 GPa, respectively) and lowest for Opal® Bond™ for both Valo Ortho (0.44 GPa; 14.52 GPa, respectively) and Valo High-Power groups (0.44 GPa; 11.84 GPa, respectively).
Źródło:
Acta Physica Polonica A; 2017, 132, 3; 697-701
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Research of Superhard (Zr-Ti-Cr-Nb)N Coatings
Autorzy:
Bondar, O.
Postolnyi, B.
Kravchenko, Yu.
Shypylenko, A.
Sobol, O.
Beresnev, V.
Kuzmenko, A.
Zukowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/1402215.pdf
Data publikacji:
2015-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.46.-w
62.20.Qp
Opis:
This work presents the results of (Zr-Ti-Cr-Nb)N superhard coatings research. The samples were fabricated by the vacuum-arc deposition method (Arc-PVD). Structure, composition and properties of these coatings were studied. The study of coatings was carried out using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Hardness measurements and adhesion tests were performed. The coatings thickness was up to 6.2 μ m, nanocrystallites sizes ranged from 4 to 7.3 nm. Values of hardness and cohesive strength were H=43.7 GPa and $L_{C}$=62.06 N, respectively. The optimal conditions for coating deposition were found.
Źródło:
Acta Physica Polonica A; 2015, 128, 5; 867-870
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Long-Range Effect in Ion-Implanted Titanium Alloys
Autorzy:
Budzynski, P.
Sielanko, J.
Powiązania:
https://bibliotekanauki.pl/articles/1402208.pdf
Data publikacji:
2015-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.55.Ln
62.20.Qp
61.82.Bg
61.80.-x
Opis:
Surface modification of titanium alloy (Ti6Al4V) by nitrogen ion implantation and ion beam-assisted deposition (C, N) was investigated. The depth distribution of implanted nitrogen atoms was analysed using the Rutherford backscattering technique. Nitrogen implantation reduces the coefficient of friction and wear. A better effect can be obtained when nitrogen implantation is combined with carbon deposition. Based on the changes in the coefficients of friction and wear as well as profilograms of wear tracks, the improvement of the tribological properties was found at a depth exceeding nearly 5 times the range of the implanted nitrogen ions. Identification of the long-range effect for Ti6Al4V alloy was performed on the basis of tribological analyses. This study is a continuation of research conducted for AISI 316L and H11 steel.
Źródło:
Acta Physica Polonica A; 2015, 128, 5; 841-844
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties of the Stellite 6 Cobalt Alloy Implanted with Nitrogen Ions
Autorzy:
Budzyński, P.
Kamiński, M.
Wiertel, M.
Pyszniak, K.
Droździel, A.
Powiązania:
https://bibliotekanauki.pl/articles/1030127.pdf
Data publikacji:
2017-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.55.Ln
62.20.Qp
61.82.Bg
61.80.-x
Opis:
The effect of nitrogen ion implantation on Stellite 6 cobalt alloy was investigated. In this research, cobalt alloy was implanted with 65 keV nitrogen ions at the fluence of (1÷10)×10¹⁶ N⁺/cm². The distribution of implanted nitrogen ions and vacancies produced by them was calculated using the SRIM program. The surface morphology was examined and the elemental analysis was performed using scanning electron microscopy, energy dispersive X-ray spectroscopy and grazing incidence X-ray diffraction. The wear tests were conducted with the use of the pin-on-disc method. The results demonstrate that implantation with nitrogen ions significantly reduces the friction factor and wear. The friction coefficient of the implanted sample at the fluence of 1×10¹⁷ N⁺/cm² increased to the values characteristic of an unimplanted sample after 5000 measurement cycles. The depth of the worn trace was about 2.0 μm. This implies that the thickness of the layer modified by the implantation process is ≈2.0 μm and exceeds the initial range of the implanted ions by an order of magnitude. This is referred to as a long-range implantation effect. The investigations have shown that the long-range effect is caused by movement of not only implanted nitrogen atoms but also carbon dopant atoms towards the friction zone. Diffusion of carbon atoms has been documented here for the first time. Furthermore, the increased content of oxygen atoms on the track bottom indicates a dominant oxidative wear of the Stellite samples after nitrogen implantation with the energy 65 keV and the fluences of 5×10¹⁶ and 10¹⁷ N⁺/cm².
Źródło:
Acta Physica Polonica A; 2017, 132, 2; 203-205
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Hardness and Wear Behaviour οf Boronized and Carburized AISI 8620 Steels
Autorzy:
Calik, A.
Duzgun, A.
Ekinci, A.
Karakas, S.
Ucar, N.
Powiązania:
https://bibliotekanauki.pl/articles/1585043.pdf
Data publikacji:
2009-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.20.-x
62.20.M-
62.20.Qp
68.35.Fx
Opis:
In this study, the hardness and wear behaviour of carburized and boronized AISI 8620 steels have been studied. The boronizing treatment increased the hardness of AISI 8620 steels from 395 $HV_{0.1}$ to a maximal 1610 $HV_{0.1}$ compared to the carburized steels and also significantly improved its wear behaviour. From obtained results, it can be concluded that boronizing is very effective surface hardening method for improving the wear properties of AISI 8620 steels.
Źródło:
Acta Physica Polonica A; 2009, 116, 6; 1029-1032
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties of Boronized AISI 316, AISI 1040, AISI 1045 and AISI 4140 Steels
Autorzy:
Calik, A.
Sahin, O.
Ucar, N.
Powiązania:
https://bibliotekanauki.pl/articles/1808113.pdf
Data publikacji:
2009-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.20.-x
62.20.Qp
68.35.Fx
Opis:
In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, the effect of a notch on impact behavior was examined by conducting the Charpy tests on borided and unborided steels. The greatest notch toughness was found for a steel AISI 316 with a microstructure consisting of different C, Ni and Cr chemical composition compared to AISI 1040, 1045 and 4140 steels.
Źródło:
Acta Physica Polonica A; 2009, 115, 3; 694-698
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nitriding of 4140 Annealed Low Alloy Steel in RF Plasma
Autorzy:
de la Piedad-Beneitez, A.
Muñoz-Castro, A.
Valencia-Alvarado, R.
López-Callejas, R.
Mercado-Cabrera, A.
Peña-Eguiluz, R.
Rodriguez-Mendez, B.
Barocio, S.
Powiązania:
https://bibliotekanauki.pl/articles/1400469.pdf
Data publikacji:
2013-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.77.Dq
52.80.Pi
62.20.Qp
81.40.Pq
81.70.Cv
Opis:
The annealed low alloy 4140 steel samples have been nitrided for different treatment periods (1-6 h) in an RF inductive plasma discharge with very low bias voltage ( ≈ 400 V). The resulting nitrided layer has been observed by means of an optical microscope whereas the nitride phases have been characterised by X-ray analysis. The corrosion response, assessed by the potentiodynamic tests in the 3.5% NaCl solution, presents both higher noble potential values and lower corrosion rates when compared with the untreated sample. The Vickers microhardness tests values show an appreciable increment compared to that of the untreated sample. The process is characterized by a high overall efficiency because similar average Vickers tests values were obtained, no matter for how long the treatment was extended. Likewise, the scanning electron micrographs confirmed no appreciable size evolution of the compound layer microstructure at different times of treatment.
Źródło:
Acta Physica Polonica A; 2013, 123, 5; 904-906
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Field Assisted Sintering Technique Compaction of Ultrafine-Grained Binderless WC Hard Metals
Autorzy:
Dopita, M.
Salomon, A.
Chmelik, D.
Reichelt, B.
Rafaja, D.
Powiązania:
https://bibliotekanauki.pl/articles/1419115.pdf
Data publikacji:
2012-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Je
81.05.Mh
81.07.-b
81.20.-n
81.20.Ev
62.20.Qp
62.20.mm
Opis:
Tungsten carbide (WC) powder having a crystallite size around 55 nm and the Brunauer-Emmett-Teller specific surface area 2.75 $m^2//g$ was sintered using the field assisted sintering/spark plasma sintering technique. Sintered samples were investigated using different analytical methods providing detailed information on the microstructure and mechanical properties of materials. Density and porosity of specimens were determined using the Archimedes principle and optical and scanning electron micrographs. The X-ray diffraction investigations provided the information on the crystal real structure and crystallite sizes. The electron backscatter diffraction measurements yielded the details about the grain size, frequency, and distributions of grain boundaries. Finally, the essential mechanical properties of sintered samples were obtained from the hardness and fracture toughness measurements. The influences of individual sintering conditions: sintering temperature and sintering time especially, on the microstructure and mechanical properties of sintered specimens were derived. Fully compact samples having the Vickers hardness HV10 around 29 GPa and fracture toughness $K_{Ic}$ approximately 7.2 MPa $m^{1//2}$ were sintered from temperatures of 1800C and holding times 1 min. Specimens sintered at lower temperatures showed lower density which resulted in a significant drop in the sample hardness.
Źródło:
Acta Physica Polonica A; 2012, 122, 3; 639-642
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Glass and Glass-Ceramics Produced from Fly Ash and Boron Waste
Autorzy:
Ercenk, E.
Sen, U.
Bayrak, G.
Yilmaz, S.
Powiązania:
https://bibliotekanauki.pl/articles/1181592.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.43.Fs
64.70.P-
61.05.cp
81.70.Pg
62.20.Qp
Opis:
In the current study, the effect of boron waste addition on some properties of fly ash based glass and glass-ceramics were investigated. The powder compositions including 10, 30, and 50 wt% boron waste was prepared. All the investigated compositions were melted at 1500C by using electrical furnaces. Melting structures were cast into the graphite mold. Thus, fly ash-boron waste based glass materials were produced. To transform the glass-ceramic, crystallization process was performed. Crystallization and glass-transition temperatures were determined by differential thermal analysis. Highly dense and crystalline materials, predominantly composed of diopside and augite together with tincalconite and residual glassy phase, were detected by X-ray diffraction analysis after heat treatment at 800, 900, and 1000C for 1 h. For the glass and glass-ceramic samples, mechanical tests such as hardness and fracture toughness were realized. A boron waste addition has a positive effect on the hardness of the specimens unlike the fracture toughness results. Furthermore, produced glass-ceramic materials were characterized via scanning electron microscopy.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 626-628
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vickers and Knoop Indentation Microhardness Study of β-SiAlON Ceramic
Autorzy:
Güder, H.
Şahin, E.
Şahin, O.
Göçmez, H.
Duran, C.
Ali Çetinkara, H.
Powiązania:
https://bibliotekanauki.pl/articles/1492772.pdf
Data publikacji:
2011-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.20.-x
62.20.Qp
62.20.de
Opis:
In this paper, analysis and interpretation of mechanical property measurements of β-SiAlON ceramic were reported. Indentation microhardness of β-SiAlON ceramic was measured using the Knoop and Vickers indenters. The analysis of the Vickers indentation microhardness data reveals the reverse indentation size effect that is the apparent microhardness increases with increasing applied indentation test load. However, the Knoop indentation microhardness data exhibit indentation size effect that is the apparent microhardness increases with decreasing applied test load. The experimental Knoop microhardness data was analyzed using Meyer's law, elastic-plastic deformation model, proportional specimen resistance model, and Hays-Kendall's model. As a result, modified proportional specimen resistance model is found to be the most effective one for the load-independent $(H_{LI})$ microhardness determination of the SiAlON ceramic. It was seen that different models used to analyze the data obtained from the Vickers indentation do not give the same intrinsic hardness value. We also present the calculation of the Young modulus, E, of the β-SiAlON ceramic.
Źródło:
Acta Physica Polonica A; 2011, 120, 6; 1026-1033
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of Spin-Dependent Mechanical Friction at Atomic Level
Autorzy:
Gzik-Szumiata, M.
Szumiata, T.
Morozow, D.
Powiązania:
https://bibliotekanauki.pl/articles/1030428.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.20.Qp
46.55.+d
75.30.Et
71.70.Gm
75.50.Bb
75.45.+j
Opis:
In this work a simple 2D model of pseudostatic friction at atomic level has been prepared, in the frame of which both Lennard-Jones potential and spin-dependent term of exchange interaction has been included. As an example, it has been demonstrated, that for iron both average lateral and normal forces between atoms of "base" and "slider" in the tribological node are altered through the change of relative direction of spins, by over a dozen of percent, when the interatomic distance is comparable to the lattice constant. Spin-dependent correction of atomic-level friction coefficient has been estimated.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 713-715
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Grain Size on Mechanical Properties of Irradiated Mono- and Polycrystalline $MgAl_2O_4$
Autorzy:
Jagielski, J.
Piatkowska, A.
Aubert, P.
Labdi, S.
Maciejak, O.
Romaniec, M.
Thomé, L.
Jozwik, I.
Debelle, A.
Wajler, A.
Boniecki, M.
Powiązania:
https://bibliotekanauki.pl/articles/1503999.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.80.Jh
61.82.Ms
62.20.Qp
68.37.Ps
Opis:
The influence of the size of crystalline regions on mechanical properties of irradiated oxides has been studied using a magnesium aluminate spinel $MgAl_2O_4$. The samples characterized by different dimensions of crystalline domains, varying from sintered ceramics with grains of few micrometers in size up to single crystals, were used in the experiments. The samples were irradiated at room temperature with 320 keV $Ar^{2+}$ ions up to fluences reaching 5 × $10^{16} cm^{-2}$. Nanomechanical properties (nanohardness and Young's modulus) were measured by using a nanoindentation technique and the resistance to crack formation by measurement of the total crack lengths made by the Vickers indenter. The results revealed several effects: correlation of nanohardness evolution with the level of accumulated damage, radiation-induced hardness increase in grain-boundary region and significant improvement of material resistance to crack formation. This last effect is especially surprising as the typical depth of cracks formed by Vickers indenter in unirradiated material exceeds several tens of micrometers, i.e. is more than hundred times larger than the thickness of the modified layer.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 118-121
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies