Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "29.30.Kv" wg kryterium: Temat


Tytuł:
Optimization of Positron-Lifetime Measurement Geometry Based on Geant4 Simulation
Autorzy:
Saro, M.
Petriska, M.
Slugeň, V.
Powiązania:
https://bibliotekanauki.pl/articles/1033256.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.30.Ep
29.30.Kv
Opis:
Proper choice of measuring geometry and experimental setup of nuclear instrumentation modules and photomultipliers is a key element which affects substantial positron lifetime measurement properties: count rate and time resolution. An adequate compromise must be found, when it comes to geometry of measurement. The optimal geometry using three detector layout is inspected in this paper. During our work, we concentrated on the simulation of XP2020Q photomultipliers and the BaF₂ scintillator material. The Geant4 simulation allows to estimate an influence of the measuring geometry on detection efficiency and to choose the most appropriate crystals dimensions and positions. As mentioned in paper of Bečvaŕ et al., slight changes in geometry result in distortion or improvement of measured results. Experimental results already showed, changes of start crystals dimensions can result in significant increase in count rate of three-detector measurement.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1634-1636
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low Background CdWO₄ Scintillation Detector
Autorzy:
Kasperovych, D.
Danevich, F.
Kobychev, V.
Kropivyansky, B.
Tymoshenko, A.
Powiązania:
https://bibliotekanauki.pl/articles/1030928.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.40.Mc
29.30.Kv
Opis:
Low background scintillation setup has been developed that exhibits 3 orders of magnitude lower counting rate of a large volume (2.1 kg) CdWO₄ detector in the energy region 0.5-2.6 MeV, and one order of magnitude above 3 MeV. The background reduction was achieved by application of radiopure passive shield, active plastic-scintillation muon veto placed above the setup and pulse-shape discrimination. Construction of additional plastic scintillation counters is in progress to reduce the residual cosmic muons background. The setup can be applied to develop radiopure scintillators, measure radioactive contamination of materials, carry out small scale low counting experiments.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 923-927
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variation of Energy Resolution with Distance for a NaI(Tl) Detector
Autorzy:
Akkurt, İ.
Arda, S.
Gunoglu, K.
Powiązania:
https://bibliotekanauki.pl/articles/1402489.pdf
Data publikacji:
2015-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.40.-n
29.30.Kv
Opis:
As the nuclear radiation has started to be used in a variety of different fields, it is important to be protected from it, and thus the radiation measurement becomes vital. The quality of the performance of a detection system, used for the energy measurements, is important. It is characterized by the width of the pulse-height distribution, obtained for the particles of the same energy (monoenergetic source). The energy spectrum of a radiation source depends on the type and energy of the incident particle and the type of the detector. In this work the energy resolution of a 3"×3" NaI(Tl) detector has been measured for photon energies of 511, 662, 835, 1173, 1275, and 1332 keV, and its variation with the detector-source distance was investigated. The energy resolution of a detector system is obtained from the peak full width at one-half of the maximum height (FWHM) of a single peak (for a particular energy) as a function of detector-source distance. It was found that the energy resolution has decreased with the increasing distance.
Źródło:
Acta Physica Polonica A; 2015, 128, 2B; B-422-B-423
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radiation Shielding Properties of Shotcrete
Autorzy:
Gunoglu, K.
Akkurt, I.
Basyigit, C.
Çakıroğlu, M.
Akkaş, A.
Powiązania:
https://bibliotekanauki.pl/articles/1218135.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.30.Kv
34.50.Bw
Opis:
Shotcrete is a concrete spraying of concrete or mortar that may be accomplished through either a dry- or wet-mix process. It is made of normal weight aggregates which have a density of approximately 2323 kg/$m^3$. For the most part, shotcrete is used in underground excavations in rock and repair work in constructions. In this study, linear attenuation coefficient (μ, $cm^{-1}$) was measured for shotcrete produced with dry mix process. Measurements were carried out by gamma spectrometry containing NaI(Tl) detector and multichannel analyzer.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 299-300
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of Radiation Attenuation Coefficients of Concretes in Different Densities
Autorzy:
Akkurt, İ.
Günoğlu, K.
Başyiğit, C.
Akkaş, A.
Powiązania:
https://bibliotekanauki.pl/articles/1399938.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.30.Kv
34.50.Bw
Opis:
The density of the concrete is important parameter for different properties. Using different types and rates of aggregates cause different densities of the concretes. Radiation shielding properties can be varied with the density and it is important to obtain optimum density for this purpose. In this study radiation attenuation coefficients were measured by comparison of five different densities of concrete that called lightweight, semi-lightweight, ordinary and semi-heavyweight and heavyweight. For this purpose concretes were produced with suitable aggregate in laboratory conditions and determined some physical and mechanical properties. The total linear attenuation coefficient measurements have been obtained by a collimated beam of gamma ray from sources ^{60}Co.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 374-375
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cement Paste as a Radiation Shielding Material
Autorzy:
Akkurt, İ.
Günoğlu, K.
Başyiğit, C.
Kılınçarslan, Ş.
Akkaş, A.
Powiązania:
https://bibliotekanauki.pl/articles/1399879.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.30.Kv
34.50.Bw
Opis:
Cement, mainly, natural limestone and clay mixture after being heated at high temperature is obtained by milling and it is defined as a hydraulic binder material. Especially, cement is used in production concrete. The photon attenuation coefficient (μ, $cm^{-1}$) for cement paste has been measured using gamma spectrometer containing NaI(Tl) detector and MCA at 835, 1173, and 1332 keV. Cement paste was prepared with types of Portland cement which is CEM I 52,5 R- and CEN reference sand has been used according to TS EN 196-1 standard. The mass attenuation coefficients have been calculated at photon energies of 1 keV to 100 GeV using XCOM and the obtained results were compared with the measurements at 835, 1173, and 1332 keV.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 341-342
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photon Attenuation Coefficients of Iron Doped Clay at 662~keV
Autorzy:
Akkurt, I.
Mavi, B.
Gunoglu, K.
Akyıldırım, H.
Canakci, H.
Powiązania:
https://bibliotekanauki.pl/articles/1399880.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.30.Kv
34.50.Bw
Opis:
After discovery of the radioactivity by Becquerel, radiation started to be used in large fields and it became part of our life nowadays. Using radiation from industry to medicine brings its hazardous effect and radiation protection developed in physics in parallel with the utilization of radiation. Although time, distance and shielding are the main rules to be protected from radiation, shielding is most effective way. In this case development of shielding materials becomes important. Clay is an interesting material and besides using it for different purposes it can be used as plaster material in building construction. In this study iron doped into clay samples and radiation shielding properties has been measured at 662 keV gamma rays. The measurements have been performed using gamma spectrometer system which contains NaI(Tl) and 16k multichannel analyser.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 343-344
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Concave-Curved Spectrometers for 2D X-Ray Optics
Autorzy:
Chukhovskii, F. N.
Chang, W. Z.
Förster, E.
Powiązania:
https://bibliotekanauki.pl/articles/1931642.pdf
Data publikacji:
1994-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
07.85.+n
29.30.Kv
Opis:
A procedure for calculating X-ray intensity profiles analytically for various X-ray diffraction geometries has been developed, which takes into account the misalignment, the solid angle factor, the effects of convergence and/or divergence of the diffracted X-rays. The approach is applicable to X-ray optics with either a point source or a quasi-parallel beam. Moreover, using this procedure allows one to calculate the magnified image from a plasma source, the intensity profiles of topographs of bent crystals, and the spectral resolution of various focusing geometries. Several examples are presented to demonstrate the applications of this procedure. Using non-dispersive and dispersive double-crystal spectrometers, rocking curves were measured for singly and doubly bent crystals. The agreement was satisfactory with the X-ray dynamic theory of bent crystals. Furthermore, we have also extended the study of X-ray optics to include the crystal anisotropic effects. The anisotropic elasticity theory is applied to bend crystals for calculating the diffracting region on the crystal surface. The anticlastic curvature effects are analytically demonstrated with respect to the crystals' diffracting area.
Źródło:
Acta Physica Polonica A; 1994, 86, 4; 463-476
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radioactivity Measurement on Dental Resin Composites
Autorzy:
Akkurt, İ.
Ermiş, R.
Baş, P.
Günoğlu, K.
Powiązania:
https://bibliotekanauki.pl/articles/1402383.pdf
Data publikacji:
2015-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
29.30.Kv
29.40.Mc
98.70.Vc
Opis:
Radioactivity is mainly due to natural ones from earth and also from outside of the atmosphere so-called cosmic radiation. Although radiation sources and their dose effect on humans are known, there is still some conflict on their health effect especially on dental restoration. The limited data for radioactive dental materials and their potential risks for patient makes those materials interesting to be investigated. For this purposes, uranium, thorium and potassium activity have been measured in some dental restorative materials, such as resin composites containing silica and zirconia particles as filler loading, using gamma spectrometer system with NaI(Tl) detector.
Źródło:
Acta Physica Polonica A; 2015, 128, 2B; B-34-B-36
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the Tenth and Half Value Layer Thickness of Concretes with Different Densities
Autorzy:
Akkaş, A.
Powiązania:
https://bibliotekanauki.pl/articles/1398769.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.20.Ci
29.30.Kv
34.50.Bw
Opis:
Half value layer (HVL) is the most frequently used quantitative factor for describing both the penetrating ability of specific radiations and the penetration through specific objects. The half value layers (HVL) and tenth value layers (TVL) are defined as the thickness of a shield or an absorber that reduces the radiation level by a factor of one-half and one tenth of the initial level, respectively. The concepts of HVL and TVL are widely used in shielding design. They are photon energy dependent, like the attenuation coefficient. HVL and TVL values provide useful information about the penetration of a specific radiation in a specific material. In this study, TVL and HVL thickness are calculated for concretes with different densities. For this purpose five types of concrete with different density ranges were selected, with densities between 600-1500 $kg//m^{3}$, called lightweight concrete, 1400-2000 kg/m^{3}, called semi lightweight concrete, 2000-2500 $kg//m^{3}$ called ordinary concrete, 2500-3000 $kg//m^{3}$, semi heavyweight concrete and 3000-4000 $kg//m^{3}$ called heavyweight concrete, respectively. For evaluated TVL and HVL thicknesses, the linear attenuation coefficients μ, were determined from measurements, using a collimated beam of gamma rays from a Cobalt-60 source.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 770-772
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies