Autor: Zikmund, P. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The decreasing of die cracking for HDPC technology by changing parameters of heat treatment
Autorzy:: Herman, A.
Zikmund, P.
Powiązania:: https://bibliotekanauki.pl/articles/380274.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: metalografia
obróbka cieplna
właściwości mechaniczne
odlewanie ciśnieniowe
metallography
heat treatment
mechanical properties
die material
HPDC technology
Opis:: In earlier works were described trends in the production of tools for die casting (hot work). Almost the entire set of issues dealt with may seem insignificant when incompletely assembled acceptance of the material and the associated risks of processing a material with an inappropriate structure, leading to a very early defect of the die. Therefore, further work will focus particularly on identifying the causes of thermal cracks and preventing a suitable choice of acceptance criteria conditions and heat treatment.
Źródło:: Archives of Foundry Engineering; 2012, 12, 3; 49-52
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 2.

Tytuł:: Effects of Core Dimensions and Manufacturing Procedure on Fluxgate Noise
Autorzy:: Janošek, M.
Vyhnánek, J.
Zikmund, A.
Butvin, P.
Butvinová, B.
Powiązania:: https://bibliotekanauki.pl/articles/1367343.pdf
Data publikacji:: 2014-07
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 75.75.-c
75.30.-m
75.50.-y
07.55.-w
75.70.-i
Opis:: The effect of demagnetizing factor and manufacturing procedure on noise of the fluxgate probes, manufactured from metallic glasses, is presented. The fluxgate probes were either tape-wound, or flat, wet-etched ringcore and race-track geometries. When combining low demagnetizing factor and high enough cross-section of the probe, a minimum in the noise dependence can be found. For 50 mm ringcores, in such minimum the noise value as low as $7 pT_{RMS}$ in 0.1-10 Hz frequency band was achieved, which is very low for an as-cast tape, and has not been reported before.
Źródło:: Acta Physica Polonica A; 2014, 126, 1; 104-105
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 3.

Tytuł:: Development of a New Tool Material for High Pressure Die Casting
Autorzy:: Herman, A.
Zikmund, P.
Tatíček, F.
Powiązania:: https://bibliotekanauki.pl/articles/382710.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
metallography
die material
HPDC technology
wear resistant alloy
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
metalografia
odlewanie ciśnieniowe
stop odporny na ścieranie
Opis:: The paper describes existing requirements for tool materials. In the light of experience with these supplied materials, we have demonstrated their considerable influence on the life of molds for die casting technology. From this research came the evaluation methodology of these tool materials which has been used for directing the development of a new material. Based on the new regulation of the chemical composition a sample was casted and forged after that. Then was determined the process of heat treatment and from a block of this material a mold insert was produced. This insert is now being tested in production.
Źródło:: Archives of Foundry Engineering; 2015, 15, 2; 23-28
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Informacja