Autor: Zhu, M. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Integrated algorithms for RFID-based multi-sensor indoor/outdoor positioning solutions
Autorzy:: Zhu, M.
Retscher, G.
Zhang, K.
Powiązania:: https://bibliotekanauki.pl/articles/130493.pdf
Data publikacji:: 2011
Wydawca:: Stowarzyszenie Geodetów Polskich
Tematy:: mapping
integration
algorithm
performance
advancement
mapowanie
integracja
algorytm
nowoczesność
Opis:: Position information is very important as people need it almost everywhere all the time. However, it is a challenging task to provide precise positions indoor/outdoor seamlessly. Outdoor positioning has been widely studied and accurate positions can usually be achieved by well developed GPS techniques but these techniques are difficult to be used indoors since GPS signal reception is limited. The alternative techniques that can be used for indoor positioning include, to name a few, Wireless Local Area Network (WLAN), bluetooth and Ultra Wideband (UWB) etc.. However, all of these have limitations. The main objectives of this paper are to investigate and develop algorithms for a low-cost and portable indoor personal positioning system using Radio Frequency Identification (RFID) and its integration with other positioning systems. An RFID system consists of three components, namely a control unit, an interrogator and a transponder that transmits data and communicates with the reader. An RFID tag can be incorporated into a product, animal or person for the purpose of identification and tracking using radio waves. In general, for RFID positioning in urban and indoor environments three different methods can be used, including cellular positioning, trilateration and location fingerprinting. In addition, the integration of RFID with other technologies is also discussed in this paper. A typical combination is to integrate RFID with relative positioning technologies such as MEMS INS to bridge the gaps between RFID tags for continuous positioning applications. Experiments are shown to demonstrate the improvements of integrating multiple sensors with RFID which can be employed successfully for personal positioning.
Źródło:: Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2011, 22; 451-465
2083-2214
2391-9477
Pojawia się w:: Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Pilling Performance of Cashmere Knitted Fabric of Woollen Ring Yarn and Mule Yarn
Pilling dzianin kaszmirowych wykonanych z wełnianych przędz obrączkowych i wózkowych
Autorzy:: Li, L.
Zhu, M.
Wei, X
Powiązania:: https://bibliotekanauki.pl/articles/231821.pdf
Data publikacji:: 2014
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:: cashmere knitted fabric
ring yarn
mule yarn
pilling
kaszmirowe dzianiny
przędza ring
przędza muł
mechacenie
Opis:: The yarn for cashmere knitted fabric is mainly processed by ring spinning and mule spinning. In this paper, four kinds of cashmere dye colours (red, black, grey, and beige) were selected to compare the pilling performance of cashmere knitted fabric of mule yarn and ring yarn. The pilling rates of the fabrics for different colours and spinning methods were tested using ICI’s Pilling Box, and the worn-off weight of the pill and fuzz for each sample was measured using an electronic balance. The results showed that the pilling rate of cashmere knitted fabric of mule yarn is higher than that of ring yarn, and that the worn-off weight of cashmere knitted fabric of mule yarn is less than that of ring yarn.
Przędze przeznaczone dla dzianin kaszmirowych są głównie produkowane na przędzarkach obrączkowych i wózkowych. W pracy badano przędze barwione czterema kolorami (czerwony, czarny, szary i beż). Pilling dzianin wykonanych z przędz o czterech kolorach i na dwóch rodzajach przędzarek sprawdzono za pomocą „ICI Pilling Box”, za pomocą ważenia dzianin oraz wytworzonego puchu pil każdej z próbek. Stwierdzono, że pilling dzianin wykonanych z przędz przędzarek wózkowych jest większy niż z przędz obrączkowych.
Źródło:: Fibres & Textiles in Eastern Europe; 2014, 1 (103); 74-75
1230-3666
2300-7354
Pojawia się w:: Fibres & Textiles in Eastern Europe
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Reliability allocation using probabilistic analytical target cascading with efficient uncertainty propagation
Alokacja niezawodności z wykorzystaniem probabilistycznej metody analitycznego kaskadowania celów zapewniająca wydajną propagację niepewności
Autorzy:: Jiang, G.
Zhu, M.
Wu, Z.
Powiązania:: https://bibliotekanauki.pl/articles/301967.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:: optymalna alokacja niezawodności
dekompozycja hierarciczna
probabilistyczna metoda analitycznego kaskadowania celów
propagacja niepewności
optimal reliability allocation
hierarchical decomposition
probabilistic analytical target cascading
uncertainty propagation
Opis:: Analytical target cascading (ATC) provides a systematic approach in solving reliability allocation problems for large scale system consisting of a large number of subsystems, modules and components. However, variability and uncertainty in design variables (e.g., component reliability) are usually inevitable, and when they are taken into consideration, the multi-level optimization will be very complicated. The impacts of uncertainty on system reliability are considered in this paper within the context of probabilistic ATC (PATC) formulation. The challenge is to reformulate constraints probabilistically and estimate uncertainty propagation throughout the hierarchy since outputs of subsystems at lower levels constitute inputs of subsystems at higher levels. The performance measure approach (PMA) and the performance moment integration (PMI) method are used to deal with the two objectives respectively. To accelerate the probabilistic optimization in each subsystem, a unified framework for integrating reliability analysis and moment estimation is proposed by incorporating PATC with single-loop method. It converts the probabilistic optimization problem into an equivalent deterministic optimization problem. The computational efficiency is remarkably improved as the lack of iterative process during uncertainty analysis. A nonlinear geometric programming example and a reliability allocation example are used to demonstrate the efficiency and accuracy of the proposed method.
Analityczne kaskadowanie celów (ATC) stanowi systematyczne podejście do rozwiązywania zagadnień alokacji niezawodności dotyczących systemów wielkoskalowych składających się z dużej liczby podsystemów, modułów i elementów składowych. Jednakże zmienność i niepewność zmiennych projektowych (np. niezawodności elementów składowych) są zazwyczaj nieuniknione, a gdy weźmie się je pod uwagę, optymalizacja wielopoziomowa staje się bardzo skomplikowana. W prezentowanym artykule, wpływ niepewności na niezawodność systemu rozważano w kontekście formuły probabilistycznego ATC (PATC). Wyzwanie polegało na probabilistycznym przeformułowaniu ograniczeń oraz ocenie propagacji niepewności w całej hierarchii, jako że wyjścia podsystemów na niższych poziomach stanowią wejścia podsystemów na poziomach wyższych. Cele te realizowano, odpowiednio, przy użyciu metody minimum funkcji granicznej (performance measure approach, PMA) oraz metody całkowania momentów statystycznych funkcji granicznej (performance moment integration, PMI). W celu przyspieszenia probabilistycznej optymalizacji w każdym podsystemie, zaproponowano ujednolicone ramy pozwalające na integrację analizy niezawodności z oceną momentów statystycznych poprzez połączenie PATC z metodą jednopoziomową (pojedynczej pętli, single-loop method). Zaproponowana metoda polega na przekształceniu probabilistycznego zagadnienia optymalizacyjnego na deterministyczne zagadnienie optymalizacyjne. Zwiększa to znacznie wydajność obliczeniową w związku z brakiem procesu iteratywnego podczas analizy niepewności. Wydajność i trafność proponowanej metody wykazano na podstawie przykładów dotyczących programowania nieliniowego geometrycznego oraz alokacji niezawodności.
Źródło:: Eksploatacja i Niezawodność; 2012, 14, 4; 270-277
1507-2711
Pojawia się w:: Eksploatacja i Niezawodność
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: New application of D-π-A molecules as a sensor for recognition of Cu2+ in polluted water
Autorzy:: Niu, H.
Zhu, G.
Zhu, M.
Li, X.
Powiązania:: https://bibliotekanauki.pl/articles/207782.pdf
Data publikacji:: 2017
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: polluted water
nuclear magnetic resonance spectroscopy
Cu(II)
woda zanieczyszczona
spektroskopia magnetycznego rezonansu jądrowego
Opis:: Novel chromophore GZP1 with D-π-A structure was designed and prepared for its application as a sensor for the recognition of Cu²⁺ ions in polluted water. Reaction of aldimine condensation was used to synthesize chromophore GZP1. Its chemical structure of was characterized by mass spectrum, nuclear magnetic resonance spectroscopy and ultraviolet-visible absorption spectrum. Cu²⁺ ions were recognized via fluorescence spectra. Chromophore GZP1 showed specific detection ability of Cu²⁺. 14 other metal ions were used as reference. The detection limit was estimated to be 0.06 μmol/dm³ in aqueous solution, which was significantly lower than the typical concentration of blood Cu²⁺ in normal individuals and the limit of copper(II) in drinking water.
Źródło:: Environment Protection Engineering; 2017, 43, 4; 67-72
0324-8828
Pojawia się w:: Environment Protection Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Comprehensive Evaluation Cloud Model for Ship Navigation Adaptability
Autorzy:: Zhu, M.
Wen, Y.
Zhou, C.
Xiao, C.
Powiązania:: https://bibliotekanauki.pl/articles/115973.pdf
Data publikacji:: 2014
Wydawca:: Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:: cloud computing
Cloud Model
marine navigation
Delphi
Qualitative Description
Quantitative Transformation
Cloud Algorithm
Fuzzy Comprehensive Evaluation Method
Opis:: In this paper, using cloud model and Delphi, we build a comprehensive evaluation cloud model to solve the problems of qualitative description and quantitative transformation in ship navigation adaptability comprehensive evaluation. In the model, the normal cloud generator is used to find optimal cloud models of reviews and evaluation factors. The weight of each evaluation factor is determined by cloud model and Delphi. The floating cloud algorithm is applied to aggregate the bottom level’s evaluation factors, and comprehensive cloud algorithm is used to aggregate the highest level’s evaluation factors to get comprehensive evaluation cloud model. Finally, evaluation result is got by matching comprehensive evaluation cloud model and optimal cloud model of reviews. As case study, the model is applied to the small LNG ship’s navigation adaptability in Southeast Asia. Compared with the fuzzy comprehensive evaluation method, the model proposed in this paper is more intuitive and reliable in comprehensive evaluation of the small LNG ship’s navigation adaptability.
Źródło:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2014, 8, 3; 331-336
2083-6473
2083-6481
Pojawia się w:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Parameter identification of ship maneuvering models using recursive least square method based on support vector machines
Autorzy:: Zhu, M.
Hahn, A.
Wen, Y.
Bolles, A.
Powiązania:: https://bibliotekanauki.pl/articles/116455.pdf
Data publikacji:: 2017
Wydawca:: Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:: ship manoeuvering
recursive least square method
ship manoeuvering model
ship maneuverability prediction
Support Vector Machines (SVM)
empirical mode decomposition (EMD)
Computational Fluid Dynamics (CFD)
Extended Kalman Filter (EKF)
Opis:: Determination of ship maneuvering models is a tough task of ship maneuverability prediction. Among several prime approaches of estimating ship maneuvering models, system identification combined with the full-scale or free- running model test is preferred. In this contribution, real-time system identification programs using recursive identification method, such as the recursive least square method (RLS), are exerted for on-line identification of ship maneuvering models. However, this method seriously depends on the objects of study and initial values of identified parameters. To overcome this, an intelligent technology, i.e., support vector machines (SVM), is firstly used to estimate initial values of the identified parameters with finite samples. As real measured motion data of the Mariner class ship always involve noise from sensors and external disturbances, the zigzag simulation test data include a substantial quantity of Gaussian white noise. Wavelet method and empirical mode decomposition (EMD) are used to filter the data corrupted by noise, respectively. The choice of the sample number for SVM to decide initial values of identified parameters is extensively discussed and analyzed. With de-noised motion data as input-output training samples, parameters of ship maneuvering models are estimated using RLS and SVM-RLS, respectively. The comparison between identification results and true values of parameters demonstrates that both the identified ship maneuvering models from RLS and SVM-RLS have reasonable agreements with simulated motions of the ship, and the increment of the sample for SVM positively affects the identification results. Furthermore, SVM-RLS using data de-noised by EMD shows the highest accuracy and best convergence.
Źródło:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2017, 11, 1; 23-29
2083-6473
2083-6481
Pojawia się w:: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Effect of circumferential grooves casing treatment on tip leakage flow and loss in a transonic mixed-flow compressor
Autorzy:: Qiang, X. Q.
Zhu, M. M.
Teng, J. F.
Powiązania:: https://bibliotekanauki.pl/articles/279263.pdf
Data publikacji:: 2013
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: compressor
casing treatment
tip leakage
flow loss
numerical simulation
Opis:: A numerical simulation of a single stage transonic mixed-flow compressor is presented. The simulation is run with a multi-passage grid that models the 3D, viscous, steady and unsteady flow field. The effect of circumferential grooves casing treatment on the compressor overall performance, tip leakage flow and loss has been studied. The results show that the narrow operating range has been significantly broaden by the casing treatment grooves, while the mismatching between the rotor and stator still exists and becomes even worse. Detailed analysis indicates that the fluid from circumferential grooves is injected into the blade passage near the suction surface and re-energizes the leakage flow, which makes mainly contribution to manipulation of the tip leakage flow and stall margin improvement. Since the pressure difference across the blade tip section has a great impact on the effectiveness of circumferential grooves, the positions of shock wave and tip leakage flow as well as where the interaction takes place ought to be taken into account through the casing treatment design procedure.
Źródło:: Journal of Theoretical and Applied Mechanics; 2013, 51, 4; 903-913
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Numerical loss analysis on slot-type casing treatment in a transonic compressor stage
Autorzy:: Zhu, M.-M.
Qiang, X.-Q.
Teng, J.-F.
Powiązania:: https://bibliotekanauki.pl/articles/280437.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: axial compressor
numerical simulation
slot-type casing treatment
loss mechanism
tip leakage flow
Opis:: To understand the loss mechanism of slot-type casing treatment, a numerical loss analysis has been carried out in a 1.5 axial transonic compressor stage with various slots. Spanwise and streamwise distribution curves of pitch-averaged entropy have been presented to survey the development of loss generation. Further, detailed entropy distributions at eight axial cuts, which have been taken through the blade row and slots, have been further analyzed to interpret the loss mechanism. The most dramatic loss growth occurred above 95% span, which directly resulted from slots injection flow upstream the leading edge. Loss generations with smooth casing have been primarily ascribed to low-momentum tip leakage flow/vortex and suction surface separation at the leading edge. CU0 slot, the arc-curved slots with 50% rotor tip exposure, has been capable of suppressing the suction surface separation loss. Meanwhile, accelerated tip leakage flow brought about additional loss near the casing and pressure surface. Upstream high entropy flow would be absorbed into the rear portion of slots repeatedly, which resulted in further loss.
Źródło:: Journal of Theoretical and Applied Mechanics; 2017, 55, 1; 293-306
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Palaeobiology of orthothecide hyoliths from the Cambrian Manto Formation of Hebei Province, North China
Autorzy:: Sun, H.
Malinky, J.M.
Zhu, M.
Huang, D.
Powiązania:: https://bibliotekanauki.pl/articles/23280.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Instytut Paleobiologii PAN
Opis:: Newly discovered specimens of the orthothecide hyoliths in Hebei Province of North China reveal new data on diversity, skeletal microstructure and palaeoecology of the order Orthothecida. Decoritheca cyrene possesses a well-defined skeletal structure consisting of rows of tubercles in the shell wall, which correspond to dimples on the internal surface of the conch. We describe a new species Cupitheca convexa sp. nov. characterised by a planar and interior convex operculum with a pair of bilobate cardinal processes, which differs from the more widespread C. holocyclata in opercular morphology and overall ornamentation of the conch, highting the significance of operculum in the classification of hyoliths. First discovery of the presumed unusual protoconch of C. convexa sp. nov. implies a possible lecithotrophic development to adapt to nutrient-fluctuant environments. Pitting structure on the operculum and shell as well as lamellar- fibrillar structure on the internal mould of C. convexa sp. nov. are observed herein.
Źródło:: Acta Palaeontologica Polonica; 2018, 63, 1
0567-7920
Pojawia się w:: Acta Palaeontologica Polonica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: A review of Silurian fishes from north-western Hunan, China and related biostratigraphy
Autorzy:: Zhao, W. -J.
Zhu, M.
Gai, Z. -K.
Pan, Z. -H.
Cui, X. -D.
Cai, J. -C.
Powiązania:: https://bibliotekanauki.pl/articles/139181.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: early vertebrates
biostratigraphy
Silurian
north-western Hunan
China
kręgowce
biostratygrafia
sylur
Hunan
Chiny
Opis:: The Silurian fishes from north-western Hunan, China are characterised by the earliest known galeaspids Dayongaspis Pan and Zeng, 1985 and Konoceraspis Pan, 1992, and the earliest known antiarch Shimenolepis Wang J.-Q., 1991, as well as rich sinacanth fin spines. Shimenolepis from Lixian County in north-western Hunan, which was dated as the Telychian (late Llandovery), has long been regarded as the oldest representative of the placoderms in the world. As such, in addition to eastern Yunnan and the Lower Yangtze Region, north-western Hunan represents another important area in South China that yields important fossil material for the research of early vertebrates and related stratigraphy. Here we summarise the Silurian fishes known in north-western Hunan so far, and classify them into three vertebrate assemblages (i.e., the Wentang, Maoshan, and Yangtze assemblages). Based on the updated Silurian vertebrate and stratigraphic databases, the Silurian fish-bearing strata in north-western Hunan can be subdivided into the Rongxi, Huixingshao, and Xiaoxi formations in ascending chronological order, which can be correlated with the Lower Red Beds, the Upper Red Beds, and the Ludlow Red Beds in South China, respectively. A new look at the Silurian strata in Lixian suggests that the age of Shimenolepis is late Ludlow rather than late Llandovery as previously suggested. The research on Silurian fishes and biostratigraphy in north-western Hunan not only provides morphological data of early vertebrates, but also offers new palaeoichthyological evidence for the subdivision, correlation, and age assignment of the Silurian marine red beds in South China. The establishment of a related high-precision Silurian stratigraphic framework in north-western Hunan will help to elucidate the temporal and spatial distribution of Silurian fossil fishes, deepen the understanding of the evolution of early vertebrates, and unravel the coevolution between Silurian vertebrates and the palaeoenvironment.
Źródło:: Acta Geologica Polonica; 2018, 68, 3; 475-486
0001-5709
Pojawia się w:: Acta Geologica Polonica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Zhu, M." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język