Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zhou, M." wg kryterium: Autor


Tytuł:
Modeling and experimental investigation of a controllable rotary fluid damper
Autorzy:
Cao, X.
Zhou, J.
Yu, M.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/38697102.pdf
Data publikacji:
2023
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
controllable damper
rotary damper
parametric modeling
sensitivity analysis
damper design
Opis:
Controllable rotary fluid damper (CRFD) is an efficient and cheap energy dissipation device, which is used to reduce the impact of vibration in mechanical systems. In this paper, the CRFD controlled by a servo motor is developed to reduce the effects of vibrations in the helicopter flight control system. The dynamic mechanical characteristic of the CRFD is experimentally investigated by the MTS machine. Due to the complex factors such as high shear thinning rate and compressibility of the damping medium, inertia of moving parts and internal friction, the CRFD studied has highly nonlinear hysteresis characteristics. The accuracy of the damper modeling is of great significance for designing effective vibration reduction methods. Therefore, a new generalized viscous–nonlinear elastic model is proposed to track the mechanical characteristics of CRFD. On the basis of parameter sensitivity analysis, the proposed generalized viscous–nonlinear elastic model is modified. According to the identification results of the modified model, the main parameters are fitted as polynomial functions of motor rotation angle. Through error analysis between analytical torques and experimental torques, it is concluded that the modified generalized viscous–nonlinear elastic model has the smallest error compared with Kwok and Maxwell models, which indicates that the proposed modified model can accurately describe the mechanical characteristics of the CRFD under different working conditions.
Źródło:
Archives of Mechanics; 2023, 75, 4; 493-516
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Peridynamic analysis of 2-dimensional deformation and fracture based on an improved technique of exerting traction on boundary surface
Autorzy:
Zhou, Z.
Yu, M.
Wang, X.
Huang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/38695705.pdf
Data publikacji:
2022
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
peridynamics
peridynamic motion equation
adaptive dynamic relaxation
traction boundary conditions
Opis:
For 2-dimensional problems in peridynamics, the transfer functions of boundary traction are constructed. The peridynamic motion equation introducing the boundary traction is improved and used to solve some typical 2-dimensional deformation and fracture problems, including the uniaxial tension and pure bending of plate, and fracture of a plate with the small circular hole or central crack. The acquired numerical solutions are close to the analytical solutions of elasticity and numerical solutions given by the finite element method. The results show that the improved technique of exerting traction on a boundary surface is valid for calculating the deformation and failure of solid. It provides a new method and path for the analysis of traction boundary value problems in peridynamics.
Źródło:
Archives of Mechanics; 2022, 74, 6; 441-461
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Genetic analysis of 38 double-flowered amaryllis (Hippeastrum hybridum) cultivars based on SRAP markers
Autorzy:
Xiong, M.
Yang, S.
Wang, Y.
Chen, D.
Wang, X.
Zhou, D.
Wei, Z.
Powiązania:
https://bibliotekanauki.pl/articles/12994499.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2021, 20, 3; 15-25
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
17 beta-estradiol affects proliferation and apoptosis of canine bone marrow mesenchymal stem cells in vitro
Autorzy:
Zhou, Z.-H.
Gu, C.-W.
Li, J.
Huang, X.-Y.
Deng, J.-Q.
Shen, L.-H.
Cao, S.-Z.
Deng, J.-L.
Zuo, Z.-C.
Wang, Y.
Ma, X.-P.
Ren, Z.-H.
Yu, S.-M.
Powiązania:
https://bibliotekanauki.pl/articles/2087308.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
apoptosis
bone marrow mesenchymal stem cells (BMSCs)
canine
proliferation
17 beta-estradiol (E2)
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 2; 235-245
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of irrigation and planting patterns on photosynthetic capacity and grain quality of winter wheat
Autorzy:
Zhao, Y.X.
Mao, X.M.
Yong, Y.Y.
Zhou, X.B.
Powiązania:
https://bibliotekanauki.pl/articles/2082531.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
Triticum aestivum L.
chlorophyll content index
dry matter weight
farinograph parameter
Opis:
With the shortage of water resources in recent years, water has become an important factor that limits the photosynthetic capacity and grain quality of winter wheat in the North China Plain. The experiment was conducted in 2011-2014, and the design of the two-factor split-plot was adopted, with three irrigation levels (0, 90, and 180 mm) for the main plot and three planting patterns (single-single row, single-double row, doubledouble row) for the subplot. The chlorophyll content index, net photosynthetic rate, and dry matter weight of winter wheat at different growth stages were measured, and the quality parameters of the grain were also measured after the harvest. The result indicated that irrigation increased the chlorophyll content index, net photosynthetic rate, grain protein, coarse starch and whiteness, which were favourable for producing dry matter and for seed formation. The chlorophyll content index, net photosynthetic rate, dry matter weight and gluten index of double-double row were higher than those of single-single row. Therefore, the 90 mm irrigation combined with the double-double row planting pattern is a good agronomic practice for winter wheat production, and beneficial for the improvement of flour quality in the North China Plain.
Źródło:
International Agrophysics; 2019, 33, 3; 313-321
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pharmacokinetics of the recombinant ovine interferon-tau in lambs
Autorzy:
Zhao, J.
Yu, H.Y.
Zhao, Y.
Li, S.Q.
Fu, X.L.
Zhou, W.
Xia, B.B.
Wang, M.L.
Chen, J.
Powiązania:
https://bibliotekanauki.pl/articles/2087588.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bioavailability
ovine interferon-τ
cytopathic effect inhibition assay
pharmacokinetic study
Źródło:
Polish Journal of Veterinary Sciences; 2019, 1; 75-82
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel fibre Bragg grating curvature sensor for structure deformation monitoring
Autorzy:
Liu, M.-Y.
Zhou, S.-G.
Song, H.
Zhou, W.-J.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/221816.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fibre Bragg grating
curvature sensor
large structure parts
deformation monitoring
Opis:
Real-time monitoring of deformation of large structure parts is of great significance and the deformation of such structure parts is often accompanied with the change of curvature. The curvature can be obtained by measuring changes of strain, surface curve and modal displacement of the structure. However, many factors are faced with difficulty in measurement and low sensitivity at a small deformation level. In order to measure curvature in an effective way, a novel fibre Bragg grating (FBG) curvature sensor is proposed, which aims at removing the deficiencies of traditional methods in low precision and narrow adjusting. The sensor combines two FBGs with a specific structure of stainless steel elastomer. The elastomer can transfer the strain of the structure part to the FBG and then the FBG measures the strain to obtain the curvature. The performed simulation and experiment show that the sensor can effectively amplify the strain to the FBG through the unique structure of the elastomer, and the accuracy of the sensor used in the experiment is increased by 14% compared with that of the FBG used for direct measurement.
Źródło:
Metrology and Measurement Systems; 2018, 25, 3; 577-587
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charge Carrier Dynamics in $Ga_{1-x}Mn_{x}As$ Studied by Resistance Noise Spectroscopy
Autorzy:
Lonsky, M.
Teschabai-Oglu, J.
Pierz, K.
Sievers, S.
Schumacher, H.
Yuan, Y.
Böttger, R.
Zhou, S.
Müller, J.
Powiązania:
https://bibliotekanauki.pl/articles/1397018.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Pp
73.50.Td
73.50.-h
73.61.-r
64.60.ah
61.72.-y
Opis:
We report on electronic transport measurements of the magnetic semiconductor Ga_{1-x}Mn_{x}As, whereby the defect landscape in various metallic thin films (x=6%) was tuned by He-ion irradiation. Changes in the distribution of activation energies, which strongly determine the low-frequency 1/f-type resistance noise characteristics, were observed after irradiation and can be explained by deep-level traps residing in the As sublattice. Various other kinds of crystalline defects such as, for instance, Mn interstitials, which possibly form nanoscale magnetic clusters with a fluctuating spin orientation, also contribute to the 1/f noise and can give rise to random telegraph signals, which were observed in films with x=7%. In addition, we neither find evidence for a magnetic polaron percolation nor any features in the noise near the Curie temperature.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 520-522
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Influence of Silicon Content and Oxygen Concentration on the Oxidation Process of Silicon-Containing Steels
Autorzy:
Yuan, Q.
Xu, G.
Zhou, M.
He, B.
Hu, H.
Powiązania:
https://bibliotekanauki.pl/articles/352126.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicone content
oxygen concentration
mass gain
isothermal holding time
Opis:
The combined influence of silicon content and oxygen concentration on silicon-containing steels was investigated, via a heating route similar to that applied in the industrial reheating process, using a Simultaneous Thermal Analyzer (STA). Four different oxygen concentrations and three different isothermal holding times were designed. The results show that the effect of silicon on the mass gain depends on the oxygen concentration and the oxidation time. The mass gain of low-silicon steel is greater than that of high-silicon steel at 1260°C in the oxygen concentrations of 1.0 vol.% and 2.0 vol.%, even when the isothermal holding time is 90 minutes. However, there is a critical time point for mass gain in oxygen concentrations ≥3.0 vol.%. The mass gain of lowsilicon steel is greater before and smaller after this critical point. The critical time is deferred with decreasing oxygen concentration.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 445-450
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Common mycelium networks with Paraglomus occultum induce better plant growth and signal substance changes between trifoliate orange seedlings
Autorzy:
Zhang, Y.-C.
Xie, M.-M.
Feng, H.-D.
Zhou, M.
Zhang, Z.Z.
Liu, C.-Y.
Wu, Q.-S.
Powiązania:
https://bibliotekanauki.pl/articles/11877054.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
Mycorrhizal mycelium can simultaneously colonize two and more neighboring plants to form common mycelium network (CMNs), whereas the information regarding CMN effects on endogenous signal substances is limited. In this study, a rootbox was separated by 37- or 0.45-μm mesh to establish donor chamber (the presence of roots and hyphae) and receptor (hyphae presented or not, free of roots) chamber, where an arbuscular mycorrhizal (AM) fungus Paraglomus occultum was inoculated into trifoliate orange seedlings of donor chamber to illustrate the underground communications of signal substances by CMNs. Mycorrhizal colonization resulted in better plant growth performance and greater root morphology in donor and receptor plants. AM inoculation increased significantly the root nitric oxide (NO) and calmodulin (CaM) levels of donor plants, regardless of 37- and 0.45-μm mesh, and subsequent CMNs induced higher root NO and CaM levels in receptor plants. Mycorrhizal colonization did not produce significant changes in root zeatin riboside (ZR) levels of donor plants, but CMN hyphae modulated lower root ZR levels of receptor plants. Mycorrhizal inoculation and subsequent CMN hyphae induced lower root gibberellin levels of donor and receptor plants, and only CMN hyphae produced lower root methyl jasmonate concentrations of receptor plants. Our results first reveal the underground communication of CaM, NO, and ZR by CMNs with P. occultum between trifoliate orange seedlings.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2018, 17, 6; 95-104
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
H/H∞ fault detection observer design for a polytopic LPV system using the relative degree
Autorzy:
Zhou, M.
Rodrigues, M.
Shen, Y.
Theilliol, D.
Powiązania:
https://bibliotekanauki.pl/articles/330200.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
fault detection observer
polytopic LPV system
relative degree of output
actuator fault detection
sensor fault detection
detekcja uszkodzeń
urządzenie wykonawcze
czujnik detekcji
Opis:
This paper proposes an H/H fault detection observer method by using generalized output for a class of polytopic linear parameter-varying (LPV) systems. As the main contribution, with the aid of the relative degree of output, a new output vector is generated by gathering the original output and its time derivative, and it is feasible to consider H actuator fault sensitivity in the entire frequency for the new system. In order to improve actuator and sensor fault sensitivity as well as guarantee robustness against disturbances, simultaneously, an H/H fault detection observer is designed for the new LPV polytopic system. Besides, the design conditions of the proposed observer are transformed into an optimization problem by solving a set of linear matrix inequalities (LMIs). Numerical simulations are provided to illustrate the effectiveness of the proposed method.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2018, 28, 1; 83-95
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Image compression-encryption algorithm combining compressive sensing with log operation
Autorzy:
Chen, R.-L.
Zhou, Y.
Luo, M.
Zhang, A.-D.
Gong, L.-H.
Powiązania:
https://bibliotekanauki.pl/articles/174009.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
image encryption
image compression
compressive sensing
log operation
Opis:
Based on compressive sensing and log operation, a new image compression-encryption algorithm is proposed, which accomplishes encryption and compression simultaneously. The proposed image compression-encryption algorithm takes advantage of not only the physical realizability of partial Hadamard matrix, but also the resistance of the chosen-plaintext attack since all the elements in the partial Hadamard matrix are 1, –1 or log 1 = 0. The proposed algorithm is sensitive to the key and it can resist various common attacks. The simulation results verify the validity and reliability of the proposed image compression-encryption algorithm.
Źródło:
Optica Applicata; 2018, 48, 4; 563-573
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nonnegativity, stability analysis of linear discrete-time positive descriptor systems: an optimization approach
Autorzy:
Yang, H.
Zhou, M.
Zhao, M.
Pan, P.
Powiązania:
https://bibliotekanauki.pl/articles/202195.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
descriptor systems
positive systems
positivity
stability
optimization
stabilność
optymalizacja
deskryptor
Opis:
This paper discusses an efficient approach to the analysis of positivity and stability of linear discrete-time positive descriptor system. Irs main objective is to convert the necessary and sufficient condition of characterizing positivity and stability of positive descriptor systems into an optimization problem, then propose a method to numerically check the positivity and stability of the positive linear discrete-time systems. Comparing with the other methods now available, the approach presented in this paper is less theoretical and easier to implement. Examples are provided in order to validate results.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 1; 1-7
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reconstruction algorithm for obtaining the bending deformation of the base of heavy-duty machine tool using inverse Finite Element Method
Autorzy:
Liu, M.
Zhang, X.
Song, H.
Wang, J.
Zhou, S.
Powiązania:
https://bibliotekanauki.pl/articles/221566.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
inverse Finite Element Method
bending deformation
heavy-duty machine tool
reconstruction algorithm
statically indeterminate structure
Opis:
The field of mechanical manufacturing is becoming more and more demanding on machining accuracy. It is essential to monitor and compensate the deformation of structural parts of a heavy-duty machine tool. The deformation of the base of a heavy-duty machine tool is an important factor that affects machining accuracy. The base is statically indeterminate and complex in load. It is difficult to reconstruct deformation by traditional methods. A reconstruction algorithm for determining bending deformation of the base of a heavy-duty machine tool using inverse Finite Element Method (iFEM) is presented. The base is equivalent to a multi-span beam which is divided into beam elements with support points as nodes. The deflection polynomial order of each element is analysed. According to the boundary conditions, the deformation compatibility conditions and the strain data measured by Fiber Bragg Grating (FBG), the deflection polynomial coefficients of a beam element are determined. Using the coordinate transformation, the deflection equation of the base is obtained. Both numerical verification and experiment were carried out. The deflection obtained by the reconstruction algorithm using iFEM and the actual deflection measured by laser displacement sensors were compared. The accuracy of the reconstruction algorithm is verified.
Źródło:
Metrology and Measurement Systems; 2018, 25, 4; 727-741
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effects of Epoxidized Acrylated Castor Oil (EACO) on Soft Poly (vinyl chloride) Films as a Main Plasticizer
Autorzy:
Song, F.
Xia, H.
Jia, P.
Zhang, M.
Hu, L.
Zhou, Y.
Powiązania:
https://bibliotekanauki.pl/articles/777906.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Castor Oil
Poly(vinyl chloride)
Epoxy Plasticizer
Thermal Property
Migration Resistance
Opis:
In this work, an environmentally friendly type plasticizer was introduced. The synthesis consisted of two steps. In the first step, castor oil (CO) was acrylated and then the acrylated castor oil (ACO) was epoxidized with the presence of formic acid and hydrogen peroxide in the second step. The epoxidized acrylated castor oil (EACO) was characterized by FTIR and  1H-NMR techniques. The EACO was used as a main plasticizer to obtain plasticized PVC materials and compared with DOP. The results showed that EACO improved polyvinyl-chloride (PVC) plasticization performance and reduced Tg from 81.06°C to 1.40°C. Plasticized PVC materials with EACO showed similar mechanical properties and better thermal stability than DOP. EACO had better volatility stabilities, migration and solvent extraction in PVC than DOP. EACO can be used to replace DOP to prepare soft films.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 4; 13-19
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies