Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zhao, Jingyu" wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Application of sodium dodecyl glycinate to the flotation of deslimed molybdenum tailings
Autorzy:
Bai, Yang
Li, Caixia
Song, Wangfang
An, Hongyun
Zhao, Jingyu
Powiązania:
https://bibliotekanauki.pl/articles/109790.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sodium dodecyl glycinate
molybdenum tailings
molecular simulation
nonmetallic minerals
amino acid collector
Opis:
By researching the nonmetallic minerals in molybdenum tailings, this paper investigated the possible application of sodium dodecyl glycinate (SD) to deslimed tailings as an alternative to the large dosage and complex flotation reagent systems of conventional combination collectors (dodecylamine and sodium oleate). The floatability differences of nonmetallic minerals under different SD dosages were analyzed via pure mineral flotation experiments, and the adsorption behavior of SD onto different mineral surfaces was analyzed by quantum chemical calculations. The results of the calculated adsorption structures and energies of the different mineral surfaces show that SD was chemically adsorbed onto the albite (001), phlogopite (010), diopside (110), dolomite (101), calcite (104) and calcite (101) surfaces and that physical adsorption occurred at the phlogopite (001) surface. The corresponding adsorption trend was dolomite > calcite > diopside > albite > phlogopite. These results theoretically verify the feasibility of applying SD to the flotation of nonmetallic minerals in tailings and provide a basis for the selection of inhibitors needed for separating phlogopite from other minerals. In the flotation of deslimed molybdenum tailings, the recoveries of the nonmetallic minerals achieved with SD were close to those in pure mineral flotation, which was greater than the recoveries achieved with dodecylamine and sodium oleate (NaOl), and the dosage was reduced by approximately 25%.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 5; 1120-1131
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of the mechanism for improving green pellet performance with compound binders
Autorzy:
Li, Caixia
Bai, Yang
Ren, Ruichen
Liu, Gaoquan
Zhao, Jingyu
Powiązania:
https://bibliotekanauki.pl/articles/110562.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pelletization
Mg-bentonite
expanded starch
CMC
house-of-cards structure
Opis:
In this study, the characters of bentonite organic binders were investigated by analytical methods, including X-ray diffraction, zeta potential, and scanning electron microscope. The results showed that the surfaces and the edges of montmorillonite layers reacted with carboxyl groups or oxhydryl groups of expanded starch or carboxymethyl cellulose (CMC), enhancing the surface electronegativity of the bentonite. The addition of organic binders reduced the contact angle between the bentonite and magnetite and enhanced the hydrophilicity of bentonite surfaces. Based on the polymer chains of organic binders, the house-of-cards structure formed by a compound binder was more stable than when formed by bentonite alone. The non-stripped layers in bentonite were peeled off under the action of chemical bonds. At the same time, improved bentonite dispersion in pellets was observed, with decreased bentonite particle size and increased surface area. The solid bridges produced by the reaction between magnetite and Mg2+ in the montmorillonite layer restrained pellet expansion, which thus improved the decrepitation temperature during the heating process.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 1; 153-162
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Internal mechanism of asymmetric deformation and failure characteristics of the roof for longwall mining of a steeply dipping coal seam
Autorzy:
Luo, Shenghu
Wang, Tong
Wu, Yongping
Huangfu, Jingyu
Zhao, Huatao
Powiązania:
https://bibliotekanauki.pl/articles/1853910.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odkształcenie
pokłady węgla
szyb kopalniany
steeply dipping seam
gangue
slip filling
deformation failure
main roof
angle effect
Opis:
Stability control of the roof is the key to safe and efficient mining of the longwall working face for a steeply dipping coal seam. In this study, a comprehensive analysis was performed on the roof destruction, migration, and filling characteristics of a steeply dipping longwall working face in an actual coalmine. Elastic foundation theory was used to construct a roof mechanics model; the effect of the coal seam inclination angle on the asymmetric deformation and failure of the roof under the constraint of an unbalanced gangue filling was considered. According to the model, increasing the coal seam angle, thickness of the immediate roof, and length of the working face as well as decreasing the thickness of the coal seam can increase the length of the contact area formed by the caving gangue in the lower area of the slope. Changes to the length of the contact area affect the forces and boundary conditions of the main roof. Increasing the coal seam angle reduces the deformation of the main roof, and the position of peak deflection migrates from the middle of the working face to the upper middle. Meanwhile, the position of the peak rotation angle migrates from the lower area of the working face to the upper area. The peak bending moment decreases continuously, and its position migrates from the headgate T-junction to the tailgate T-junction and then the middle of the working face. Field test results verified the rationality of the mechanics model. These findings reveal the effect of the inclination coal seam angle on roof deformation and failure and provide theoretical guidance for engineering practice.
Źródło:
Archives of Mining Sciences; 2021, 66, 1; 101-124
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies