Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zabuski, Lesław" wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Construction of Pressure Tunnels
Autorzy:
Zabuski, Lesław
Powiązania:
https://bibliotekanauki.pl/articles/241148.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
pressure tunnel
Carpathian flysch
numerical analysis
FLAC code
Opis:
The paper focuses on two pressure tunnels in the design of “Katy-Myscowa” water reservoir. One of them serves as a discharge conduit, whereas the other plays an energetic role. Their depths range between 0 and 75 metres and their diameters equal 5 m. Tunnels are located in the rock mass of Carpathian flysch which is anisotropic and heterogeneous, composed of layers of sandstone and clay shales and intersected with interbedding fissures and numerous joints. The paper is divided in two parts. The first part focuses on methods of excavating and supporting, as well as injecting and sealing (i.e. waterproofing) the tunnel. In the second part, a numerical analysis using the FLAC2D code based on the finite difference method was carried for calculating displacements and internal forces in the preliminary support and in permanent lining. Results of the analysis allow for the assessment of conditions in the tunnel during its excavation and exploitation stages.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2019, 66, 3-4; 77-100
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of the Causes of a Landslide in Koronowo (Polish Lowlands)
Autorzy:
Zabuski, Lesław
Kulczykowski, Marek
Świdziński, Waldemar
Powiązania:
https://bibliotekanauki.pl/articles/241015.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
landslide causes
landslide development
atmospheric conditions
faulty construction
Opis:
The paper discusses difficulties of identifying the causes of a landslide. These difficulties are illustrated in the example of a catastrophic landslide on the embankment of the western bank of the Brda River, which affected a bridge abutment of a disused narrow-gauge railway line from Bydgoszcz to Koronowo (Polish Lowlands). The railway was closed in 1992, and after the removal of the track, the bridge served as a pedestrian overpass. The landslide occurred in February 2011. Investigations revealed that the first signs of the landslide were cracks and subsidence that appeared at the embankment crest. Then, an initially slow movement accelerated suddenly, resulting in an over 45 m total displacement of the soil mass. The primary passive cause of the landslide movement resulted from the geology of the mass (loose soils underlain by cohesive soils) and from the steep inclination of the embankment surface. Active causes, however, are often ambiguous. In this case, no significant apparent phenomena which could trigger the movement occurred in the days preceding its initiation. Therefore, a detailed analysis of atmospheric conditions was carried out to identify and explain the causes. It was proved that the fundamental triggering cause of the landslide was a combination of rainfall, snowfall, snow-melting and air temperature. Moreover, an important cause was a faulty construction of a ditch with a sewage pipe on the crest of the embankment.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2019, 66, 1-2; 47-56
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three-Dimensional Analysis of a Landslide Process on a Slope in Carpathian Flysch
Autorzy:
Zabuski, Lesław
Powiązania:
https://bibliotekanauki.pl/articles/240990.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
Carpathian flysch
landslide
discontinuity
3D numerical calculations
displacement
Opis:
The paper presents a 3D (spatial) analysis of deformation processes in the landslide slope Bystrzyca in Szymbark near Gorlice (Low Beskid – Carpathians; N 49°37′ 09″, E 21°05′ 49″) carried out by the computer code FLAC3D based on the finite difference method. The numerical analysis was performed to determine the influence of the orientation of layers and discontinuities and of hydrogeological conditions on slope deformations and the failure mechanism during sliding processes. The massif is modeled as an elasto-plastic medium obeying the Coulomb-Mohr criterion. Two variants of hydrogeological conditions are analyzed, namely the “dry slope” (without water) and the “wet slope” (entirely saturated). The influence of the orientation of discontinuities (modeled as “ubiquitous”) on the landslide mechanism is investigated as well. Few orientations of discontinuities with respect to the dip direction of the slope surface are considered, namely consequent, insequent, and subsequent (two variants in each case). The results show a clear impact of the pattern of discontinuities and hydrogeological conditions on the deformational behavior of the landslide and the shape of the slip surface. The 3D approach and results of the numerical simulation of the landslide movement prove the necessity of 3D modeling in some cases.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2019, 66, 1-2; 27-45
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of potential landslide processes in the Passo della Morte (Carnian Alps, Italy)
Autorzy:
Zabuski, Lesław Michał
Marcato, Gianluca
Powiązania:
https://bibliotekanauki.pl/articles/2060262.pdf
Data publikacji:
2020
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
Passo della Morte landslide
discontinuous rock mass
distinct element method
Opis:
Numerical simulations are provided of a potential landslide on a slope in the Passo della Morte (Carnian Alps, northeastern Italy). The slope is situated on the flank of a valley of the Tagliamento River. The danger arising from the potential landslide is associated with sliding rock damming the valley and a sudden discharge of water accumulated at the back of the dam in the case of its uncontrolled outburst. A description of the geology and geomechanical properties of the rock mass provides context for analysis of four models differing in terms of the shapes and dimensions of the solid rock blocks. The Universal Distinct Element Code (UDEC) is used to simulate the landslide of the rock mass modelled as a set of blocks interacting along discontinuities. Deformation scenarios obtained in the simulations vary depending on the model. Different, both continuous and discontinuous, deformation and failure mechanisms such as buckling, rockfall, rotation of the individual blocks and their packets, and folding, take place in each of the models analysed. Nevertheless, slip movement occurs in all four models. In addition, the simulations show that the rock mass in the deformed zones undergoes strong loosening.
Źródło:
Geological Quarterly; 2020, 64, 3; 681--691
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distinct Element Simulation of a Landslide Process
Autorzy:
Zabuski, Lesław
Mierczyński, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/1837764.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
Distinct Element Method
sandstone quarry
landslide
Opis:
The paper presents a numerical simulation of the development of a catastrophic landslide in a sandstone quarry and methods of reconstructing the quarry to its previous condition from before the landslide. The important objective of the paper is to present the capabilities of the numerical method used in the analysis of the landslide process, namely the Distinct Element Method (DEM). This method is poorly known, though it is capable of solving important geotechnical problems in which massive displacements are modelled. The features of the method are presented on the basis of a case study. Therefore a numerical analysis is carried out to show the performance of DEM in generating a displacement of several dozen meters in the example of a catastrophic landslide that occurred some years ago in a sandstone quarry. This engineering problem makes it possible to describe and analyse the mechanisms, causes and consequences of the landslide.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2020, 67, 1-4; 3-16
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Współczesne procesy osuwiskowe na klifie w Jastrzębiej Górze
Present-day landslide processes on the cliff in Jastrzębia Góra
Autorzy:
Zabuski, Lesław
Kulczykowski, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2076065.pdf
Data publikacji:
2020
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
osuwisko
klif
przemieszczenie
obliczenia stateczności
landslide
cliff
displacement
stability calculations
Opis:
The paper describes the geomorphological and geological structure of the cliff Baltic bank in Jastrzębia Góra. The detailed description and analysis of the landslide developed in the selected cross-section of the cliff is provided. Extensive complex investigations involving multiple techniques are described. These methods include the borehole drilling and inspection of the soils composing the slope, laboratory tests of the shear strength parameters by the triaxial compression method, slope stability calculations basing on the finite difference method and inclinometric measurements of the displacements in the borehole performed on the slope. The results prove that the extent of the landslide is limited to the upper part of the slope. The stability factor lower than 1.0 and the continuous displacements measured in the borehole indicate the recent cliff instability. Therefore the works for slope stabilization are strongly recommended.
Źródło:
Przegląd Geologiczny; 2020, 68, 9; 682--690
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stability analysis of the slope subjected to the dynamic loading
Autorzy:
Zabuski, Lesław
Powiązania:
https://bibliotekanauki.pl/articles/27311343.pdf
Data publikacji:
2023
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
slope stability
landslide
pseudo-static analysis stability
stabilność zbocza
osuwisko
analiza pseudostatyczna stateczności
Opis:
This paper presents the results of a stability analysis of a slope located in the immediate vicinity of a railway line. The plans for the extension of this railway track include the construction of another line, which would run parallel to the existing one, within a few metres distance. It is expected that intensive goods train traffic will generate both static and dynamic forces in the underlying subsoil. Consequently, seismic vibrations will be generated in the subsoil, propagating mainly not only in the horizontal direction but also in the vertical direction. The method of seismic coefficient of the earthquake intensity determined by a pseudo-static method and horizontal component of acceleration is appropriate and recommended because it is simple, and the safety factor of the slope is calculated in the same way as in conventional stability calculations.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2023, 118; 243--255
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies