Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Yuan, J." wg kryterium: Autor


Tytuł:
An innovative methodology for recycling iron from magnetic preconcentrate of an iron ore tailing
Autorzy:
Yu, J.
Han, Y.
Gao, P.
Li, Y.
Yuan, S.
Li, W.
Powiązania:
https://bibliotekanauki.pl/articles/110888.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
magnetic preconcentrate
iron ore tailing
iron recycling
fluidized magnetization roasting
magnetic separation
Opis:
Iron ore tailing is a kind of hazardous solid waste produced by iron and steel industry. In order to separate and recycle iron from the magnetic preconcentrate of an iron ore tailing, an innovative technological route of fluidized magnetization roasting followed by low-intensity magnetic separation was proposed in this paper. The effects of roasting temperature, dosages of reducing gas CO and fluidizing gas N2 on recovery rate of iron were carried out and optimized. The results showed that the hematite was almost reduced to magnetite by a gas mixture of 4 m3/h CO and 1 m3/h N2 at roasting temperature of 540 °C. Under the optimized conditions, a magnetic concentrate assaying 61.4 wt% Fe with a recovery rate of 81.8% was obtained from the magnetic preconcentrate of an iron ore tailing. The iron chemical phase, X-ray diffraction (XRD), and optical metallographic microscope analyses revealed that siderite was converted to magnetite successfully after roasting, and some coarse magnetite-hematite interlocking particles were formed due to insufficient reaction time, which could also be recovered by magnetic separation after liberating from gangue minerals.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 668-676
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charge Carrier Dynamics in $Ga_{1-x}Mn_{x}As$ Studied by Resistance Noise Spectroscopy
Autorzy:
Lonsky, M.
Teschabai-Oglu, J.
Pierz, K.
Sievers, S.
Schumacher, H.
Yuan, Y.
Böttger, R.
Zhou, S.
Müller, J.
Powiązania:
https://bibliotekanauki.pl/articles/1397018.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Pp
73.50.Td
73.50.-h
73.61.-r
64.60.ah
61.72.-y
Opis:
We report on electronic transport measurements of the magnetic semiconductor Ga_{1-x}Mn_{x}As, whereby the defect landscape in various metallic thin films (x=6%) was tuned by He-ion irradiation. Changes in the distribution of activation energies, which strongly determine the low-frequency 1/f-type resistance noise characteristics, were observed after irradiation and can be explained by deep-level traps residing in the As sublattice. Various other kinds of crystalline defects such as, for instance, Mn interstitials, which possibly form nanoscale magnetic clusters with a fluctuating spin orientation, also contribute to the 1/f noise and can give rise to random telegraph signals, which were observed in films with x=7%. In addition, we neither find evidence for a magnetic polaron percolation nor any features in the noise near the Curie temperature.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 520-522
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Construction of a recombinant baculovirus expressing swine hepatitis E Virus ORF2 and preliminary research on its immune effect
Autorzy:
Yang, Z.
Wang, K.
Hu, Y.
Yuan, P.
Yang, Y.
Xie, L.Y.
Huang, S.L.
Liu, J.
Ran, L.
Song, Z.H.
Powiązania:
https://bibliotekanauki.pl/articles/2087759.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
swine HEV
ORF2
baculovirus
immunogenicity
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 47-54
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Contribution on fluid inclusion abundance to activation of quartz flotation
Autorzy:
Yuan, Y.
Zhang, L.
Guan, J.
Zhang, C.
Wu, J.
Chen, Z.
Powiązania:
https://bibliotekanauki.pl/articles/110067.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
recovery
flotation
mineralogy
fluid Inclusions
fluid inclusion abundance
Opis:
In this study, comparative experiments were conducted on the recovery of quartz using flotation with different fluid inclusion abundances. A large number of fluid inclusions with various sizes have been found in natural quartz. Micrographs, inductively coupled plasma, electron probe microanalysis, homogenization temperature, Raman spectra, zeta potentials, X-ray photoelectron spectroscopy, scanning electron microscope, and energy dispersive spectrometer were used to characterize the fluid inclusions and quartz, as well as the adsorption tests and single mineral flotation experiments to investigate its floatability. The results demonstrated that it was more likely for quartz with higher fluid inclusion abundance to connect with Fe3+ sufficiently to achieve a high level of flotation recovery, due to the powerful collecting ability by sodium dodecyl sulphonate to Fe3+. Furthermore, the mechanism indicated that the adsorption between quartz and Fe3+ was a process of chemisorption.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 981-991
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of a 20 kJ Sparker for High Resolution Ocean Seismic Survey
Autorzy:
Sun, Y.
Gao, Y.
Yan, P.
Wang, J.
Yuan, W.
Wu, H.
Wang, Y.
Wan, P.
Zhao, G.
Powiązania:
https://bibliotekanauki.pl/articles/1807914.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.80.Wq
43.30.+m
Opis:
An ocean sparker with a stored energy of 20 kJ was developed for high resolution ocean seismic survey. The sparker is mainly composed of a high voltage high frequency charging supply, energy storage capacitors, a discharging switch and discharging electrodes. The H-bridge inverter and series resonant mode were adopted in the charging supply, and a dry high voltage transformer was used to improve the safety and maintenance, the average charging rate exceeded 4 kJ/s. An optical fiber connected between the high voltage system and the control system was used to isolate high voltage and transmit the high voltage signal. The high voltage electrodes of the discharging electrodes consisted of several hundreds of electrodes. The experimental results show that the sparker can be operated at repetition rates of 12 shots/min, and can meet the expected design requirements. Further field tests will be done in the near future.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1059-1061
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of calcination temperature on activation behaviors of coal-series kaolin by fluidized bed calcination
Autorzy:
Yuan, S.
Han, Y.
Li, Y.
Gao, P.
Yu, J.
Powiązania:
https://bibliotekanauki.pl/articles/109800.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal-series kaolin
fluidized bed calcination
calcination temperature
activation behaviors
Opis:
This paper is aimed at investigating activation behaviors for coal-series kaolin using fluidized bed calcination as a novel method. The properties of calcined products at different temperature by fluidized bed calcination were evaluated by determination of weight loss rate, whiteness, chemical oxygen demand (COD), aluminum dissolution degree. The thermal behaviors and reaction mechanism were characterized by thermo gravimetric-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), particle size distribution (PSD) and scanning electron microscopy (SEM). The results showed that calcination temperature was essential factor determining the properties and crystallinity of calcined products using fluidized bed calcination. Coal-series kaolin transformed into irregular and amorphous metakaolin with excellent properties as calcined at 600-900 °C, which attributed to the dehydroxylation of kaolinite and combustion of carbon/organic matter. Calcined kaolin eliminated activity ascribed to the recrystallization into mullite when calcination temperature was over 1000 °C. It was believed that fluidized bed calcination was an efficient thermal activation technology for coal-series kaolin and the calcination temperature should be controlled accurately.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 590-600
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of nitrogen deposition on growth and relationship of Robinia pseudoacacia and Quercus acutissima seedlings
Autorzy:
Ding, W.
Wang, R.
Yuan, Y.
Liang, X.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/41055.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
nitrogen deposition
plant growth
relationship
Robinia pseudoacacia
Quercus acutissima
seedling
positive interaction
nitrogen fixation
facilitation
competition
Opis:
Increased nitrogen deposition and biological invasions may be two crucial consequences of global change. Exotic plants often have adverse effects on native plants. However, there are reports of occasional positive interaction between them. Increased nitrogen deposition enhances nitrogen availability in soil, which may facilitate the growth of some exotic plant and decrease the competitive advantage of native plants because of their adaptation to low-nutrient environments. Consequently, increased nitrogen deposition may regulate the relationship between exotic and native plants. A greenhouse experiment was, thus, conducted to examine the effects of increased nitrogen deposition on the relationship between the native Quercus acutissima and the exotic Robinia pseudoacacia, which are both widely distributed in North China. Seedlings of both species were grown in monoculture and mixture arrangements in a pot experiment with different nitrogen addition levels (i.e., 0, 2, 5, and 10 g N m–2 a–1). Nitrogen addition altered the biomass partitioning of Q. acutissima and R. pseudoacacia seedlings, with more biomass allocated to leaves and less to roots. Although R. pseudoacacia seedlings always had growth predominance over Q. acutissima seedlings, Q. acutissima was not threatened by R. pseudoacacia at the four levels of nitrogen addition during the three-month duration of the experiment. A positive interaction between the seedlings of R. pseudoacacia and Q. acutissima was found, and increased nitrogen deposition did not affect the positive interaction. Further studies are necessary to determine whether or not R. pseudoacacia is harmful to native ecosystems and should be limited for forestation in North China.
Źródło:
Dendrobiology; 2012, 67
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enzymatic Polishing and Reactive Dyeing of Cotton Fabric in One Bath
Enzymatyczne polerowanie i reaktywne barwienie bawełnianych tkanin w systemie stosowania jednej kąpieli
Autorzy:
Wang, P.
Hong, Y.
Ding, Y.
Cui, L.
Yuan, J.
Wang, Q.
Fan, X.
Powiązania:
https://bibliotekanauki.pl/articles/232210.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
cotton fabric
neutral cellulase
reactive dye
one-bath method
colour strength
tkanina bawełniana
celulaza
reaktywne barwienie
metoda jednej kąpieli
siła koloru
Opis:
Cellulase has the ability to remove fuzz-fibres from cellulosic textiles, which endows fabric with a glabrous appearance and soft handle. In this paper, the combined uses of bio-polishing and reactive dyeing in one bath were carried out, aiming at shortening the treatment time and reducing the overall consumption of water and energy as well. The properties of cotton fabrics before and after the combined treatments were investigated, including the colour strength, colour fastnesses and tearing strength. The results indicated that the colour fixing agent of soda had noticeable inhibiting effects on cellulase activity. Meanwhile reactive dyes might react with cellulase proteins under alkaline conditions, resulting in decelerating influences on the dye-fibre covalent reactions. The acceptable one-bath process consisted of bio-polishing and dyeing of cotton in neutral solution, followed by dye fixation under alkaline conditions. Compared to polishing and dyeing in two baths, the one-bath method endowed fabric with a bit lower colour strength.
Celulaza ma zdolność do usuwania włosków zmechacenia z tekstyliów celulozowych, co pozwala na osiągnięcie gładkiej powierzchni o delikatnym chwycie. W pracy badano sumaryczny efekt biopolerowania i reaktywnego barwienia przeprowadzanych w jednej kąpieli. Metoda ta ma na celu skrócenie czasu obróbki i zredukowanie ogólnego zapotrzebowania na wodę i energię. Badano właściwości tkanin bawełnianych przed i po obróbce. Między innymi badano nasycenie kolorem, trwałość koloru i wytrzymałość na rozrywanie. Wyniki wskazują, że soda jako środek utrwalający kolor ma zauważalny wpływ na hamowanie działania celulazy. Porównując metodę równoczesnego polerowania i barwienia z metodą, gdzie obydwie obróbki stosowane są indywidualnie stwierdzono, że w metodzie równoczesnej obróbki uzyskuje się nieco niższe nasycenie koloru.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 1 (109); 109-113
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and numerical study of the uniaxial compressive stress-strain relationship of a rock mass with two parallel joints
Autorzy:
Xiong, L. X.
Yuan, H. Y.
Zhang, Y.
Zhang, K. F.
Li, J. B.
Powiązania:
https://bibliotekanauki.pl/articles/231076.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
masa skalna łączona
złącze równoległe
siła szczytowa
jointed rock mass
parallel joint
peak strength
Opis:
A “rock bridge”, defined as the closest distance between two joints in a rock mass, is an important feature affecting the jointed rock mass strength. Artificial jointed rock specimens with two parallel joint fractures were tested under uniaxial compression and numerical simulations were carried out to study the effects of the inclination of the rock bridge, the dip angle of the joint, rock bridge length, and the length of joints on the strength of the jointed rock mass. Research results show: (1) When the length of the joint fracture, the length of the rock bridge, and the inclination of the rock bridge stay unchanged, the uniaxial compressive strength of the specimen gradually increases as the inclination of the joint fracture increases from 0° to 90°. (2) When the length of the joint fracture, the length of the rock bridge, and the inclination of the joint fracture stay unchanged, the uniaxial compressive strength of the specimen shows variations in trends with the inclination of the rock bridge increasing from 30° to 150° (3). In the case when the joint is angled from the vertical loading direction, when the dip angle of the joint fracture, the inclination of the rock bridge, and the length of the rock bridge stay unchanged, the uniaxial compressive strength of the specimen gradually decreases with an increasing length of joint fracture. When the dip angle of the joint fracture, the inclination of the rock bridge, and the length of the joint fracture stay unchanged, the uniaxial compressive strength of the specimen does not show a clear trend with an increase of the length of the rock bridge.
Źródło:
Archives of Civil Engineering; 2019, 65, 2; 67-80
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study on fracturing coal seams using CaO demolition materials to improve permeability
Autorzy:
Tang, Y.
Yuan, L.
Xue, J
Duan, C.
Powiązania:
https://bibliotekanauki.pl/articles/92132.pdf
Data publikacji:
2017
Wydawca:
Główny Instytut Górnictwa
Tematy:
soundless chemical demolition
coal seam
gas drainage
CaO
pokład węgla
odmetanowanie
Opis:
Currently, methane gas disasters in underground coal mines are a major problem which seriously threatens safe mining. This study employed soundless chemical demolition for fracturing coal seams with low permeability. Additionally, the fracturing theory and failure mechanisms of soundless chemical demolition agents were investigated. Materials such as CaO, naphthalene-based water reducer, sodium gluconate and silicate cement were used to prepare the novel soundless chemical demolition agent, whose optimum proportion was discovered to be 90:3:5:7 by carrying out orthogonal experiments. The innovative demolition agent cracked briquettes and the maximum width of cracks reached 16.33 mm, showing significant potential for improving the permeability of coal seams.
Źródło:
Journal of Sustainable Mining; 2017, 16, 2; 47-54
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of heat stress on leaf morphology and nitrogen–carbohydrate metabolisms in two wucai (Brassica campestris L.) genotypes
Autorzy:
Yuan, L.
Tang, L.
Zhu, S.
Hou, J.
Chen, G.
Liu, F.
Liu, S.
Wang, C.
Powiązania:
https://bibliotekanauki.pl/articles/56883.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
Heat stress is a major environmental stress that limits plant growth and yield worldwide. The present study was carried out to explore the physiological mechanism of heat tolerant to provide the theoretical basis for heat-tolerant breeding. The changes of leaf morphology, anatomy, nitrogen assimilation, and carbohydrate metabolism in two wucai genotypes (WS-1, heat tolerant; WS-6, heat sensitive) grown under heat stress (40°C/30°C) for 7 days were investigated. Our results showed that heat stress hampered the plant growth and biomass accumulation in certain extent in WS-1 and WS-6. However, the inhibition extent of WS-1 was significantly smaller than WS-6. Thickness of leaf lamina, upper epidermis, and palisade mesophyll were increased by heat in WS-1, which might be contributed to the higher assimilation of photosynthates. During nitrogen assimilation, WS-1 possessed the higher nitrogen-related metabolic enzyme activities, including nitrate reductase (NR), glutamine synthetase (GS), glutamate synthase (GOGAT), and glutamate dehydrogenase (GDH), which were reflected by higher photosynthetic nitrogen-use efficiency (PNUE) with respect to WS-6. The total amino acids level had no influence in WS-1, whereas it was reduced in WS-6 by heat. And the proline contents of both wucai genotypes were all increased to respond the heat stress. Additionally, among all treatments, the total soluble sugar content of WS-1 by heat got the highest level, including higher contents of sucrose, fructose, and starch than those of WS-6. Moreover, the metabolism efficiency of sucrose to starch in WS-1 was greater than WS-6 under heat stress, proved by higher activities of sucrose phosphate synthase (SPS), sucrose synthase (SuSy), acid invertase (AI), and amylase. These results demonstrated that leaf anatomical alterations resulted in higher nitrogen and carbon assimilation in heat-tolerant genotype WS-1, which exhibited a greater performance to resist heat stress.
Źródło:
Acta Societatis Botanicorum Poloniae; 2017, 86, 2
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mitigation scratch on fused silica optics using CO2 laser
Autorzy:
Liu, C.-M.
Yan, Z.-H.
Yang, L.
Jiang, Y.
Zu, X.-T.
Wang, H.-J.
Liao, W.
Yuan, X.-D.
Zheng, W.-G.
Powiązania:
https://bibliotekanauki.pl/articles/174978.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
mitigation
scratch
fused silica
CO2 laser
Opis:
The scratch on a fused silica surface was treated as a chain of connected damage sites and mitigated one after another using CO2 laser irradiation. The optical microscopy image shows that a scratch with the width of about 30 μm and length of several millimeters can be completely mitigated without the formation of debris and bubbles. The mitigated scratch can survive under raster scan laser irradiation with the fluency increased up to 11.0J/cm2 at 3ns and 351nm. On the contrary, the substrate without CO2 laser mitigation is seriously damaged under this irradiation. The light modulation induced by mitigation is much smaller when the scratch is mitigated before being damaged. The light modulation is about 2 when the distance to the mitigated sample is larger than 20cm. The birefringence induced by residual stress in the mitigated scratch is measured. The retardance of the mitigated scratch before being damaged is not visible. Therefore, residual stress in this mitigated scratch before being damaged should be not a critical potential risk in laser damage.
Źródło:
Optica Applicata; 2016, 46, 3; 387-397
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multiple-instance learning with pairwise instance similarity
Autorzy:
Yuan, L.
Liu, J.
Tang, X.
Powiązania:
https://bibliotekanauki.pl/articles/330821.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
multiple instance learning
instance selection
similarity
support vector machine (SVM)
uczenie maszynowe
podobieństwo
metoda wektorów wspomagających
Opis:
Multiple-Instance Learning (MIL) has attracted much attention of the machine learning community in recent years and many real-world applications have been successfully formulated as MIL problems. Over the past few years, several Instance Selection-based MIL (ISMIL) algorithms have been presented by using the concept of the embedding space. Although they delivered very promising performance, they often require long computation times for instance selection, leading to a low efficiency of the whole learning process. In this paper, we propose a simple and efficient ISMIL algorithm based on the similarity of pairwise instances within a bag. The basic idea is selecting from every training bag a pair of the most similar instances as instance prototypes and then mapping training bags into the embedding space that is constructed from all the instance prototypes. Thus, the MIL problem can be solved with the standard supervised learning techniques, such as support vector machines. Experiments show that the proposed algorithm is more efficient than its competitors and highly comparable with them in terms of classification accuracy. Moreover, the testing of noise sensitivity demonstrates that our MIL algorithm is very robust to labeling noise.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2014, 24, 3; 567-577
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prevalence of pathogenicity island ETT2 in Escherichia coli isolated from piglets with diarrhea in northeast of China
Autorzy:
Yuan, C.W.
Liu, W.X.
Hou, J.L.
Zhang, L.G.
Wang, G.Q.
Powiązania:
https://bibliotekanauki.pl/articles/2087783.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Escherichia coli
pathogenicity island
ETT2
piglets
diarrhea
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 5-12
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies