Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "Yoon, K." wg kryterium: Autor

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 22
Tytuł:
Properties Of MgB2/Ga Composites Prepared By Mechanical Alloying
Właściwości kompozytów MgB2/Ga wytworzonych przez mechaniczne stopowanie
Autorzy:
Yoon, K.
Ahn, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/355192.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium diboride
superconductors
mechanical alloying
ball milling
dwuborek magnezu
nadprzewodnik
stopowanie mechaniczne
frezowanie kulowe
Opis:
In this study, we examined the effect of Ga-doping and mechanical alloying in MgB2 on microstructural and phase evolution. A comparison was made between in-situ and ex-situ processed Mg-B-Ga samples. Densification was markedly improved by ex-situ sintering of ball-milled MgB2+Ga. The Ga-doping and ball-milling prior to sintering resulted in the formation of impurity phases such as MgO, Ga5Mg2 and Ga2O3. Lattice parameter of MgB2 increased with increasing ball-milling duration as well as by Ga-doping.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1271-1274
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Degradations of 2,4-dichlorophenol and polychlorinated biphenyls with zero valent iron under subcritical conditions. Importance of subcritical water oxidation
Autorzy:
Oh, S.-Y.
Yoon, M.-K.
Powiązania:
https://bibliotekanauki.pl/articles/207444.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
chemicals removal
water treatment
degradation
gas chromatography
iron
mass spectrometry
organic pollutants
polychlorinated biphenyls
2,4-dichlorophenol
DCP
polychlorinated biphenyl
PCBs
usuwanie chemikaliów
uzdatnianie wody
degradacja
chromatografia gazowa
żelazo
spektrometria masowa
zanieczyszczenia organiczne
polichlorowane bifenyle
PCB
2,4-dichlorofenol
Opis:
The abiotic transformations of 2,4-dichlorophenol (DCP) and polychlorinated biphenyls (PCBs) has been examined in the presence and of zero valent iron (Fe(0)) under subcritical conditions. It was found that the degradation of DCP was significantly enhanced, showing complete degradation of DCP in 3 h at 300 °C. Control experiments without Fe(0) indicated that the removal of DCP in the iron–water system was mostly due to subcritical water oxidation and that the enhancement of degradation in the presence of Fe(0) was less significant. Regardless of Fe(0), PCBs were rapidly decomposed, showing 93% destruction in 5 h at 300 °C. Product identification by gas chromatography-mass spectrometry (GC-MS) analysis showed that the reductive transformation of DCP and PCBs w Fe(0) existed under subcritical conditions. Our results suggest that subcritical water degradation may be a possible remediation option to treat DCP and PCBs in water and soil.
Źródło:
Environment Protection Engineering; 2015, 41, 3; 73-86
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Solution for Safe Ship Considering Seakeeping PERformance
Autorzy:
Yoon, H.K.
Nguyen, V.M.
Nguyen, T.T.
Powiązania:
https://bibliotekanauki.pl/articles/116617.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
seakeeping
seakeeping performance
safe ship
safe ship considering
optimal weather routing
container ship
Dynamic Programming (DP)
Changwon National University (CWNU)
Opis:
In recent years, safety of a ships has become one important issues needed to solved as soon as possible in ship navigation. Optimal weather routing is one of best solution for ensuring safe operation of a ship with a with short passage time or minimum energy to avoid a certain excessive motion. This paper introduced the development of solution for safety and optimal weather routing a ship considering seakeeping performance based on model test result. This study introduced how to apply A* algorithm based on result of the seakeeping model test for determining the optimal ship routes. Seakeeping model test of 8600 TEU container ship was carried out in Changwon National University's seakeeping basin and its RAOs at various frequencies were used to predict the RMS motion values in irregular waves. The specially modelled path-cost function and the safety constraints were proposed for finding the optimal path of the ship. The comparison of ship performances estimated by great circle’s path and estimated optimal route during the voyage of the ship was investigated.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 3; 517-525
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of climatic conditions in successive plant growing seasons on the response of selected varieties of apple trees (Malus domestica Borkh.)
Autorzy:
Zydlik, Z.
Rutkowski, K.
Swierczynski, S.
Morkunas, I.
Yoon, H.-K.
Seo, J.-H.
Kang, K.-J.
Kleiber, T.
Powiązania:
https://bibliotekanauki.pl/articles/14872.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Źródło:
Journal of Elementology; 2020, 25, 1
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulated impacts of rainfall extremes on yield responses of various barley varieties in a temperate region
Autorzy:
Yoon, C.Y.
Kim, S.
An, K.N.
Powiązania:
https://bibliotekanauki.pl/articles/2083065.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
barley
rainfall
simulation
food cost
grain
yield
Opis:
As population rises, more people need to be fed. With increasing income, the potential exists for increases in the demand for cereals (i.e., barley). Since barley has a high level of tolerance to environmental stressors, this crop has been recommended as a potential crop for food security in marginal environments. In this study, a crop growth Agricultural Land Management Alternatives with Numerical Assessment Criteria model, was parameterized and used to simulate the yields of two barley types grown in a temperate environment at a latitude of 35°N. In order to apply this crop model to barley, 19 years of field data were used to model calibration and validation. As a result, the ALMANAC model accurately simulated yields for both barley types. The validated model was used to predict yields under three diverse seasonal rainfall scenarios associated with different patterns of the Central Pacific El Niño influence. According to the simulation results, excessively high seasonal rainfall decreased barley yields. Crop price and annual revenue of the two barley types were also evaluated using a non-linear regression model. For the malt type, the food price was higher with a higher rainfall, while naked barley had a higher revenue under the conditions of a lower rainfall.
Źródło:
International Agrophysics; 2021, 35, 2; 119-129
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Novel Extraction Process Of Rare Earth Elements From NdFeB Powders Via Alkaline Treatment
Nowy sposób ekstrakcji pierwiastków ziem rzadkich z proszków NdFeB w roztworach alkalicznych
Autorzy:
Chung, K. W.
Kim, C.-J.
Yoon, H.-S.
Powiązania:
https://bibliotekanauki.pl/articles/355324.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
recycling
NdFeB magnet
alkaline treatment
leaching
selective leaching efficiency
recykling
magnes neodymowy
obróbka alkaliczna
ługowanie
wydajność
Opis:
The alkaline treatment of NdFeB powders in NaOH solution at various equivalent amounts of NaOH at 100°C was performed. The resultant powders were then leached in 0.5M H2SO4 solution at 25°C for 2 minutes. At 5 equivalents of NaOH, neodymium in NdFeB powders was partially transformed to neodymium hydroxide. The transformation of neodymium to neodymium hydroxide actually occurred at 10 equivalents of NaOH and was facilitated by increasing the equivalent of NaOH from 10 to 30. In addition, iron was partially transformed to magnetite during the alkaline treatment, which was also promoted at a higher equivalent of NaOH. The leaching yield of neodymium from alkaline-treated powders was increased with an increasing equivalent of NaOH up to 10; however, it slightly decreased with the equivalent NaOH of over 10. The leaching yield of iron was inversely proportional to that of rare earth elements. NdFeB powders treated at 10 equivalents of NaOH showed a maximum leaching yield of neodymium and dysprosium of 91.6% and 94.6%, respectively, and the lowest leaching yield of iron of 24.2%, resulting in the highest selective leaching efficiency of 69.4%.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1301-1305
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Effect of Zr and Si on Isothermal Oxidation of Ti
Autorzy:
Ha, S.-H.
Kim, B.-H.
Yoon, Y.-O.
Lim, H.-K.
Kim, S. K.
Powiązania:
https://bibliotekanauki.pl/articles/353260.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti
Zr
Si
silicide
oxidation
Opis:
In this study, the combined effect of Zr and Si on isothermal oxidation of Ti for 25 and 50h at 820°C, which is the temperature related to exhaust valves operation, was investigated. Si addition into Ti-5mass%Zr alloy led to a distribution of silicide Ti5Si3 phase formed by a eutectic reaction. The Ti sample containing only Zr showed more retarded oxidation rate than Ti-6Al-4V, the most prevalent Ti alloy, at the same condition. However, while a simultaneous addition of Zr and Si resulted in greater increase of oxidation resistance. The oxide layer formed after the addition of Zr and Si comprised TiO2, ZrO2, and SiO2.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1493-1495
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adaptive Predictive Control of a Distillation Column
Autorzy:
Yoon, T. W.
Yang, D. R.
Lee, K. S.
Kwon, Y. M.
Powiązania:
https://bibliotekanauki.pl/articles/908309.pdf
Data publikacji:
1999
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
adaptacyjny układ sterowania
sterownik predykcyjny
adaptive control
multivariable predictive controller
distillation column
Opis:
Distillation processes reveal complicated multivariable nonlinear dynamics for which it is difficult to design a high-performance control system. This paper proposes an adaptive control scheme for a distillation column. The proposed adaptive system consists of a multivariable receding-horizon predictive controller using a transfer function model and a recursive least-squares (RLS) based estimator. Simulations show a consistent closed-loop performance despite the uncertain nonlinear characteristics of the distillation column.
Źródło:
International Journal of Applied Mathematics and Computer Science; 1999, 9, 1; 193-206
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Compression Properties of Fe-Cr-B Alloy Manufactured using Laser Metal Deposition
Autorzy:
Joo, Y.-A.
Yoon, T.-S.
Park, S.-H.
Lee, K.-A.
Powiązania:
https://bibliotekanauki.pl/articles/352075.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Fe-Cr-B composite
laser Metal Deposition
bulk type
microstructure
compressive properties
Opis:
Fe-Cr-B alloy is a material with precipitation of boride inside Fe matrix, and it features outstanding hardness and wear resistance properties. However, Fe-Cr-B alloy is a difficult material to process, making it difficult to use as a bulk type structure material which requires delicate shapes. This study attempted to manufacture Fe-Cr-B alloy using a 3D printing process, laser metal deposition. This study also investigated the microstructure, hardness and compression properties of the manufactured alloy. Phase analysis results is confirmed that α-Fe phase as matrix and (Cr, Fe)2B phase as reinforcement phase. In the case of (Cr, Fe)2B phase, differences were observed according to the sample location. While long, coarse, unidirectional needle-type boride phases (~11 μm thickness) were observed in the center area of the sample, relatively finer boride phases (~6 μm thickness) in random directions were observed in other areas. At room temperature compression test results confirmed that the sample had a compression strength is approximately 2.1 GPa, proving that the sample is a material with extremely high strength. Observation of the compression fracture surface identified intergranular fractures in areas with needle-type boride, and transgranular fractures in areas with random borides. Based on this results, this study also reviewed the deformation behavior of LMD Fe-Cr-B alloy in relation to its microstructures.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1459-1462
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zabezpieczenie transformatorów olejowych przed wybuchem: eksperymenty i symulacje
Protection of oil-filled transformers against explosion: experiments and simulations
Autorzy:
Landis, B.
Muller, S.
Perigaud, G.
Petrovan-Boiarciuc, M.
Ahmed, O. K.
Yoon, S.
Powiązania:
https://bibliotekanauki.pl/articles/153693.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
transformatory energetyczne
eksplozja
łuk elektryczny
eksperymenty
symulacje
power transformers
explosion
electrical arc
experiments
simulations
Opis:
Eksplozje transformatorów olejowych są powodowane przez łuk elektryczy. W przeciągu milisekund łuk doprowadza do odparowania otaczającego go oleju a wygenerowany gaz znajduje się pod ciśnieniem ponieważ inercja oleju zapobiega jego ekspansji. To doprowadza do niebezpiecznych eksplozji, kosztownych awarii i ewentualnego zanieczyszczenia środowiska. Podczas gdy mury ochronne otaczające transformator mogą zahamować eksplozje a tryskacze zagasić wywołany pożar niniejszy dokument przedstawia strategię, która zapobiega eksplozji kadzi transformatora.
Oil-filled transformer explosions are caused by electrical arc occurring in transformer tanks. Within milliseconds, arc vaporizes the surrounding oil and the generated gas is pressurized as the liquid inertia prevents its expansion. The pressure difference between the gas bubble and the surrounding oil generates pressure waves, which propagate and interact with the tank. The reflections of the pressure waves build up the static pressure, which rises and leads to the tank rupture since tanks are not designed to withstand such levels of static pressure. This results in dangerous explosions, expensive damages and possible environmental pollution. The current paper presents a strategy to prevent the transformer tank rupture. Once an electrical fault occurs, the fast depressurization of the tank is induced by quick oil evacuation to a reservoir in order to prevent the tank explosion. To evaluate the efficiency of this strategy, experiments and computer simulations are used. The experiments were performed on large scale transformers equipped with the protection. They confirmed that the protection prevents the explosion. Besides, simulations of the consequences of an electrical arc occurring in a 200 MVA transformer geometry were run and again, they confirmed that the static pressure increase can be prevented by a quick oil evacuation triggered by the first dynamic pressure peak generated by the electrical arc.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 2, 2; 176-182
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Cu Addition on Oxide Growth of Al-7 mass%Mg Alloy at High Temperature
Autorzy:
Ha, Seong-Ho
Shah, Abdul Wahid
Kim, Bong-Hwan
Yoon, Young-Ok
Lim, Hyun-Kyu
Kim, Shae K.
Powiązania:
https://bibliotekanauki.pl/articles/2049221.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al-Mg system
Cu addition
oxidation
phase diagram
Opis:
Effect of Cu addition on oxide growth of Al-7 mass%Mg alloy at high temperature was investigated. As-cast microstructures of Al-7 mass%Mg and Al-7 mass%Mg-1 mass%Cu alloys showed α-Al dendrites and area of secondary particles. The 1 mass%Cu addition into Al-7 mass%Mg alloy formed Mg32(Al, Cu)49 ternary phase with β-Al3Mg2. The total fraction of two Mg-containing phases in Cu-added alloy was higher than the β-Al3Mg2 fraction in Cu-free alloy. From measured weight gains depending on time at 500°C under an air atmosphere, it was shown that all samples exhibited significant weight gains depending on time. Al-7mass%Mg1mass%Cu alloy showed the relatively increased oxidation rate when compared with Cu-free alloy. All the oxidized cross-sections throughout the entire oxidation time showed coarse and dark areas regarded as oxides grown from the surface to inside, but bigger oxidized areas were formed in the Al-7mass%Mg-1mass%Cu alloy containing higher fraction of Mg-based phases in the as-cast microstructure. As a result of compositional analysis on the oxide clusters, it was found that the oxide clusters contained Mg-based oxides formed through internal oxidation during a long time exposure to oxidizing environments.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 699-702
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spontaneous Formation of Titanium Nitride on the Surface of a Ti Rod Induced by Electro-Discharge-Heat-Treatment in an N2 Atmosphere
Autorzy:
Lee, W. H.
Yoon, Y. H.
Kim, Y. H.
Lee, Y. K.
Kim, J. Y.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/352477.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
surface modification
diffusion
heat treatment
XPS
Opis:
A single pulse of 2.0 to 3.5 kJ of input energy from a 450 mF capacitor was applied to a commercially pure Ti rod in a N2 atmosphere. The surface of the Ti rod transformed from TiO2 into titanium nitride in times as short as 159 msec, providing a bimodal morphology of the cross-section. A much higher value of hardness that was observed at the edge of the cross-section was attributed to nitrogen-induced solid-solution hardening that occurred during the electrical discharge process. The activation energy (Ea) for the diffusion process was estimated to be approximately 86.9 kJ/mol. Results show that the electrical discharge process is a possible potential method for the nitriding of Ti; advantages include a short processing time and control of the nitrided layer without dimensional changes.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1281-1285
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Si Addition on Oxide Growth of Al-6 mass%Mg Alloy Melts
Autorzy:
Yoon, Young-Ok
Ha, Seong-Ho
Shah, Abdul Wahid
Kim, Bong-Hwan
Lim, Hyun-Kyu
Kim, Shae K.
Powiązania:
https://bibliotekanauki.pl/articles/2049203.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al-Mg system
Si addition
oxidation
phase diagram
Opis:
Influence of Si addition on oxide layer growth of Al-6 mass%Mg alloys in molten state was investigated in this study. After melt holding for 24 h, the melt surface of only Si-free alloy became significantly bumpy, while no considerably oxidized surface was observed even with 1 mass%Si addition. There was no visible change on the appearance of melt surfaces with increasing Si content. As a result of compositional analysis on the melt samples between before and after melt holding, the Si-added alloys nearly maintained their Mg contents even after the melt holding for 24 h. On the other hand, the Mg content in the Si-free alloy showed a great reduction. The bumpy surface on Si-free alloy melt showed a large amount of pores and oxide clusters in its cross-section, while the Si-added alloy had no significantly grown oxide clusters on the surfaces. As a result of compositional analysis on the surfaces, the oxide clusters in Si-free alloy contained a great amount of Mg and oxygen. The oxide layer on the Si-added alloy was divided into Mg-rich and Mg-poor areas and contained certain amounts of Si. Such a mixed oxide layer containing Si would act as a protective layer during the melt holding for a long duration.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 695-698
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Carbon Nanotubes On The Properties Of Spark Plasma Sintered ZrO2/CNT Composites
Wpływ nanorurek węglowych na właściwości spiekanych metodą sps kompozytów ZrO2/CNT
Autorzy:
Shim, D. H.
Jung, S. S.
Kim, H. S.
Cho, H.
Kim, J. K.
Kim, T. G.
Yoon, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/351266.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CNT
ZrO2
composite
SPS
kompozyty
Opis:
Zirconia matrix ZrO2/CNT composite materials reinforced with multiwall carbon nanotubes were fabricated using a spark plasma sintering technique. The effects of the amount of CNTs addition, sintering temperature and sintering pressure on the properties of the resulting ZrO2/CNT composites were examined. 0 to 9 vol. % CNTs were dispersed in zirconia powder, and the resulting mixture was sintered. The electrical conductivity, hardness, flexural strength, and density were measured to characterize the composites. The friction and wear properties of the composites were also tested. The flexural strength and friction coefficient of the composites were improved with up to 6 vol.% of CNT addition and the flexural strength showed a close relationship with the relative density of the composite. The electrical conductivity increased with increasing proportion of the CNTs, but the efficiency was reduced at more than 6 vol.% CNTs.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1315-1318
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure Formation of Al-5 mass%Mg Alloy Melts by Interaction with Silica
Autorzy:
Kim, Sun-Ki
Ha, Seong-Ho
Kim, Bong-Hwan
Yoon, Young-Ok
Lim, Hyun-Kyu
Kim, Shae K.
Kim, Yong-Jig
Powiązania:
https://bibliotekanauki.pl/articles/2049152.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al-Mg system
silica
reduction
Mg2Si
phase diagram
Opis:
Dissolution of Si in Al-5 mass%Mg alloy melt by the reduction of SiO2 and its effect on microstructure formation of the alloy after solidification were investigated. Al-5 mass%Mg alloy without silica powder had approximately 0.05 mass%Si as an impurity. No significant difference in Si content was observed after the reaction with silica for 10 min, while the Si content increased up to about 0.12 mass% after 30 min. From the microstructure analysis and calculation of Scheil-Gulliver cooling, it was considered that as-cast microstructures of Al-5 mass%Mg-1 mass% SiO2 alloys had the distribution of eutectic phase particles, which are comprised of β-Al3Mg2 and Mg2Si phases. Based on the phase diagrams, only limited amount of Mg can be selectively removed by silica depending on the ratio of Si and Mg. Addition of silica of more than approximately 1.5 mass% in Al-5 mass%Mg alloy led to the formation of spinel and removal of both mg and Al from the melt.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 947-950
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 22

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies