Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Xue, J" wg kryterium: Autor


Tytuł:
Growth of β-$Ga_2O_3$ Nanorods and Photoluminescence Properties
Autorzy:
Zhang,, S.
Zhuang, H.
Xue, C.
Li, B.
Shen, J.
Wang, D.
Powiązania:
https://bibliotekanauki.pl/articles/1814023.pdf
Data publikacji:
2007-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.65.-k
79.60.Jv
81.15.Cd
Opis:
β-$Ga_2O_3$ nanorods were successfully fabricated through annealing $Ga_2O_3$/Mo films deposited on the Si (111) substrate by radio frequency magnetron sputtering technique. The morphology and structure of the as-synthesized nanorods were characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and energy dispersive X-rays spectroscopy. The results show that the formed nanorods are single-crystalline $Ga_2O_3$ with monoclinic structure. The diameters of nanorods are 200 nm and lengths typically up to several micrometers. A photoluminescence spectrum at room temperature under excitation at 325 nm exhibits two strong blue-light peaks located at about 413.0 nm and 437.5 nm, attributed to the recombination of bound electron-hole exciton in β-$Ga_2O_3$ single crystal. The growth process of the β-$Ga_2O_3$ nanorods is probably dominated by conventional vapor-solid mechanism.
Źródło:
Acta Physica Polonica A; 2007, 112, 6; 1195-1201
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of High-Density GaN Nanowires through Ammoniating $Ga_2O_3//Nb$ Films
Autorzy:
Zhuang, H.
Li, B.
Zhang, S.
Zhang, X.
Xue, Ch.
Wang, D.
Shen, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813498.pdf
Data publikacji:
2008-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.65.-k
81.05.Ea
81.15.Cd
Opis:
High-density GaN nanowires were successfully synthesized on Si(111) substrates through ammoniating $Ga_2O_3//Nb$ films under flowing ammonia atmosphere at 950°C. The as-synthesized GaN nanowires are characterized by X-ray diffraction, selected-area-electron diffraction, Fourier transform infrared, scanning electron microscopy, and field-emission transmission electron microscopy. The results show that the synthesized nanowires are single-crystal hexagonal wurtzite GaN with diameters ranging from 30 to 100 nm and lengths up to several microns. The photoluminescence spectra measured at room temperature only exhibit a strong and broad emission peak at 367.8 nm. Finally, the growth mechanism of GaN nanowires is discussed.
Źródło:
Acta Physica Polonica A; 2008, 113, 2; 723-730
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A fully coupled solid and fluid model for simulating coal and gas outburst with DEM and LBM
W pełni zintegrowany model oddziaływania pomiędzy cieczą a ciałem stałym do symulacji wyrzutów węgla i gazu metodą elementów dyskretnych i metodą siatkową Boltzmanna
Autorzy:
Wang, Y. C.
Xue, S.
Xie, J.
Powiązania:
https://bibliotekanauki.pl/articles/348657.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
wyrzut węgla i gazu
oddziaływanie ciecz-ciało stałe
metoda elementów dyskretnych
metoda siatkowa Boltzmanna
coal and gas outbursts
solid-fluid coupling
Discrete Element Method
lattice Boltzmann method
Opis:
In this paper, we present a fully coupled solid-fluid code which is developed to model the whole process of coal and gas outbursts. The Discrete Element Method is used to model the deformation and fracture of solid, while Lattice Boltzmann Method models fluid flow, including free flow and Darcy flow. These two methods are coupled in a two-way process: the solid part provides a moving boundary condition and transfers momentum to the fluid, and the fluid exerts a dragging force to the solid. Gas desorption occurs at solid-fluid boundary, and gas diffusion is implemented in the solid code where particles are assumed as porous material. Some preliminary simulations are carried out to validate the code.
W niniejszej publikacji prezentujemy w pełni zintegrowany kod oddziaływania pomiędzy cieczą a ciałem stałym, opracowany do modelowania całego procesu wyrzutów węgla i gazu. Metoda elementów dyskretnych stosowana jest do modelowania deformacji i pęknięcia ciała stałego, podczas gdy metoda siatkowa Boltzmanna - do modelowania przepływu cieczy, w tym przepływu swobodnego i przepływu zgodnie z prawem Darcy'ego. Te dwie metody połączone są w procesie dwukierunkowym: część stała zapewnia warunki ruchomej granicy rozdziału, przenosząc pęd do cieczy, a ciecz wywiera opór na ciele stałym. Desorpcja gazu występuje na granicy oddziaływania pomiędzy cieczą a ciałem stałym, a do rozproszenia gazu dochodzi w kodzie ciała stałego, gdzie cząsteczki traktowane są jako materiał porowaty. Prowadzone są wstępne symulacje w celu sprawdzenia poprawności kodu.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 377-384
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An enclosed dust removal system with ducting
Zamknięty system odpylania z kanalizacją
Autorzy:
Xie, J.
Xue, S.
Chen, W. M.
Zhou, G.
Powiązania:
https://bibliotekanauki.pl/articles/348688.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
chodnik
pyły
modelowanie numeryczne
zamknięty system odpylania
roadways
dusts
enclosed dust removal system
numerical modeling
Opis:
A numerical modeling study is undertaken to understand gas-solid particle flows at the face of a mechanically developing roadway of an underground coal mine which employs a force-exhaust auxiliary ventilation system and uses mist spray for dust suppression. The FLUENT, a commercial computational fluid dynamics (CFD) package is used with Semi Implicit Method for Pressure Linked Equations (SIMPLE) algorithm for simulation. The results of the modeling show that dust control should focus on the middle area of the face. Based on the results, an enclosed dust removal system with ducting was developed. The system was successfully trialed at an underground coal mine with a satisfactory result.
Aby uzyskać przebieg przepływu cząstek gazu na przodku mechanicznie kształtowanego chodnika przewozowego w kopalni podziemnej wykorzystującej system wentylacji kombinowanej i system natrysku rozpylającego do tłumienia pylenia przeprowadzono badania z wykorzystaniem modeli numerycznych. Dla celów symulacji użyto pakietu FLUENT - ogólnodostępnego systemu pomiaru dynamiki płynów w połączeniu z algorytmem SIMPLE. Wyniki modelu pokazują, że odpylanie winno koncentrować się na środkowej powierzchni przodka. Na podstawie uzyskanych wyników opracowano zamknięty system odpylania z kanalizacją. System przetestowano w kopalni z zadowalającym efektem.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 423-433
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Studies of ESR Parameters and Local Lattice Structure of the Vanadate-Lithium-Borate Glasses
Autorzy:
Feng, W.
Zhao, M.
Li, T.
Zhang, X.
Xue, J.
Powiązania:
https://bibliotekanauki.pl/articles/1419845.pdf
Data publikacji:
2012-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.70.Ch
75.10.Dg
61.72.Bb
76.30.Fc
Opis:
Electron spin resonance spectral parameters of $V^{4+}$ ions in vanadate-lithium-borate glasses have been calculated by the crystal-field theory. The theoretical results are $g_{∥ }$ = 1.940, $g_{⊥}$ = 1.983 and $A_{∥ } = -175 \times 10^{-4} cm^{-1},$ $A_{⊥} = -65 \times 10^{-4} cm^{-1}$ which are good agreement with the experimental values ($g_{∥ }$ = 1.939(3), $g_{⊥}$ = 1.998(3) and $A_{∥ } = (170.6-176.4) \times 10^{-4} cm^{-1},$ $A_{⊥} = (61.3-71.4) \times 10^{-4} cm^{-1}$). In addition, the bond lengths of the local lattice structure are, respectively, $R_{∥ }$ = 1.5 Å and $R_{⊥}$ = 1.95 Å which have been shown to have a compressed tetrahedral geometry along the $C_4$ axis.
Źródło:
Acta Physica Polonica A; 2012, 122, 1; 167-169
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental factors-induced stomatal signalling
Autorzy:
Merilo, E.
Laanemets, K.
Xue, S.
Margna, L.
Schroeder, J.
Brosche, M.
Kollist, H.
Powiązania:
https://bibliotekanauki.pl/articles/80937.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conference
environmental factor
stomatal signalling
signal transduction
stomatal conductance
carbon dioxide
air humidity
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2013, 94, 2
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Conceptual Framework for Business Model Innovation: The Case of Electric Vehicles in China
Koncepcyjne ramy dla modelowych rozwiązań biznesowych: przypadek samochodów elektrycznych w Chinach
Autorzy:
Shao, L.
Xue, Y.
You, J.
Powiązania:
https://bibliotekanauki.pl/articles/371763.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Komitet Człowiek i Środowisko PAN
Tematy:
business model innovation
electric vehicles
“3-7” structure system
two-phase conceptual framework
value network
modelowa innowacja biznesowa
samochody elektryczne
system strukturalny „3-7”
dwufazowe ramy konceptualne
wartość sieci
Opis:
EVs (electric vehicle), as sustainable technologies, hold the potential to achieve the sustainability of the transport system and challenge the prevailing business models of internal combustion engines (ICEs). To unlock the dominant logic of ICEs and promote the diffusion of EVs, Business model (BM) innovation is necessary. However, BM innovation for EVs still faces many obstacles. This paper makes contribution theoretically and practically by constructing a “3-7” system and proposing a two-phase conceptual framework for BM innovation of EVs. The case of Shenzhen City, China is studied to illustrate how the “3-7” system and two-phase conceptual framework is applied. Based on the case study, this paper concludes two new barriers that are not highlighted by the previous literature and makes a number of suggestions to help address the issues found in BM innovation.
Samochody elektryczne (EVs – electric vehicles), jako technologie prośrodowiskowe mogą doprowadzić do zrównoważoności całego systemu transportowego, stanowiąc tym samym wyzwanie dla dominującego modelu biznesowego tradycyjnych pojazdów spalinowych. Aby przełamać monopol maszyn spalinowych i doprowadzić do upowszechnienia samochodów elektrycznych, konieczne jest opracowanie biznesowego modelu innowacji. Niestety, w przypadku samochodów elektrycznych nadal napotyka on na wiele przeszkód. W tym artykule proponujemy rozwiązania zarówno na płaszczyźnie teoretycznej, jak i praktycznej, proponując system „3-7” i składające się z dwóch faz ramy konceptualne. W celach zobrazowania tego systemu wybrano przypadek miasta Shenzen w Chinach. Na tej podstawie w dyskusji zidentyfikowano dwie nowe bariery, który nie były dotąd omawiane w literaturze i zaproponowano szereg nowych rozwiązań, które powinny przyczynić się do rozwiązania istniejących problemów.
Źródło:
Problemy Ekorozwoju; 2014, 9, 2; 27-37
1895-6912
Pojawia się w:
Problemy Ekorozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Characterization of a High Energy Combustion Agent (BHN) and Its Effects on the Combustion Properties of Fuel Rich Solid Rocket Propellants
Autorzy:
Pang, W.-Q.
Zhao, F.-Q.
Xue, Y.-N.
Xu, H.-X.
Fan, X.-Z.
Xie, W.-X.
Zhang, W.
Lv, J.
Deluca, L. T.
Powiązania:
https://bibliotekanauki.pl/articles/358474.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
fuel rich solid propellant
BHN
DSC
TG-DTG
burning rate
combustion properties
Opis:
A high energy combustion agent (tetraethylammonium decahydrodecaborate, BHN) was prepared by means of an ion exchange reaction (IER), and the prepared samples were characterized by the advanced diagnostic techniques of Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric Analysis (TGA), and Differential Scanning Calorimetry (DSC) etc. The effects of BHN particles on the hazard and combustion properties of fuel rich solid propellants were investigated. The results showed that the BHN samples and fuel rich propellants containing BHN particles can be prepared successfully and solidified safely. The peak temperature of thermal decomposition and the heat of decomposition of the BHN samples prepared were 305.8 °C and 210.9 J•g-1 at a heating rate of 10 K•min-1, respectively. The burning rate and pressure exponent of fuel rich solid propellants decreases with increases in the fraction of BHN particles in the propellant formulation. Compared with the reference formulation (sample BP-1), the burning rate of the propellant with 10% mass fraction of BHN particles (sample BP-4) had decreased 30% at 3.0 MPa, and the pressure exponent had dropped from 0.44 to 0.41.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 3; 537-552
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and simulative study on accumulator function in the process of wave energy conversion
Autorzy:
Zhang, W.
Liu, Y.
Luo, H.
Xue, G.
Zhang, J.
Powiązania:
https://bibliotekanauki.pl/articles/259862.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
wave energy converter
AMESim simulation
accumulator
experimental verification
Opis:
In this paper, a floating-buoy wave energy converter using hydrostatic transmission system is studied. The entire work progress of wave energy power generation device is introduced, and the hydraulic transmission principles are emphasized through the simulation to verify the feasibility of design principle of hydraulic transmission system. The mathematical model of the accumulator is established and applied in the AMEsim simulation. The simulation results show that the accumulator plays an important role in the wave power hydraulic transmission system and that the correct configuration of accumulator parameters can improve the rapidity and stability of the system work. Experimental results are compared with the simulation results to validate the correctness of the simulation results. This would provide a valuable reference to the optimal design of wave power generation.
Źródło:
Polish Maritime Research; 2016, 3; 79-85
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flame retardant properties of gas sealing materials used in coal mines
Uniepalniacze w materiałach zabezpieczających ściany w kopalniach węgla przed wypływem gazu
Autorzy:
Song, H.
Liu, J.
Xue, F.
Cheng, F.
Powiązania:
https://bibliotekanauki.pl/articles/947389.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
flame retardant
coal mine
gas sealing materials
tensile strength
flame resistance properties
opóźniacz palenia
kopalnia węgla
materiały zabezpieczające przed wypływem gazu
wytrzymałość na rozciąganie
odporność na płomień
Opis:
Flame retardants are key ingredients for gas sealing materials used in the coal mine wall. In this paper, the types and doses of flame retardants are investigated. The results showed that a gas sealing material with 11 wt % complex flame retardants had a good performance when the complex flame retardants were composed of aluminum hydroxide and chlorinated paraffin at a ratio of 3:8. The flame resistant property of this gas sealing material conforms to the safety standards of coal mines (MT113-1995). Furthermore, their mechanical properties met the standard requirements of the polymer cement waterproof coatings (GB/T23445-2009). The costs are very low compared with similar products in current practical use.
Zbadano wpływ rodzaju oraz ilości uniepalniacza, dodanego do emulsji styrenowo-akrylowej napełnionej krzemionką i cementem, na palność otrzymanej kompozycji zabezpieczającej ściany w kopalni węgla przed wypływem gazu. Efekt opóźnienia palenia na poziomie przewidzianym w normach bezpieczeństwa kopalń węgla (MT113-1995) uzyskano w wypadku zastosowania materiału uszczelniającego, modyfikowanego dodatkiem 11 % mas. kompozycji uniepalniacza, stanowiącej mieszaninę wodorotlenku glinu i chlorowanej parafiny w stosunku masowym 3:8. Modyfikowane materiały uszczelniające spełniają również wymagania pod względem właściwości mechanicznych, dotyczące polimerowo-cementowych powłok wodochronnych (GB/T23445-2009), a koszt ich wytwarzania jest dużo niższy niż koszt wytwarzania stosowanych obecnie produktów.
Źródło:
Polimery; 2016, 61, 4; 266-271
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modulation of virulence genes by the two-component system PhoP - PhoQ in avian pathogenic Escherichia coli
Autorzy:
Tu, J.
Huang, B.
Zhang, Y.
Xue, T.
Li, S.
Qi, K.
Powiązania:
https://bibliotekanauki.pl/articles/30418.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Avian pathogenic Escherichia coli (APEC) infections are a very important problem in the poultry industry. PhoP-PhoQ is a two-component system that regulates virulence genes in APEC. In this study, we constructed strains that lacked the PhoP or PhoQ genes to assess regulation of APEC pathogenicity by the PhoP-PhoQ two-component system. The PhoP mutant strain AE18, PhoQ mutant strain AE19, and PhoP/PhoQ mutant strain AE20 were constructed by the Red homologous recombination method. Swim plates were used to evaluate the motility of the APEC strains, viable bacteria counting was used to assess adhesion and invasion of chick embryo fibroblasts, and Real-Time PCR was used to measure mRNA expression of virulence genes. We first confirmed that AE18, AE19, and AE20 were successfully constructed from the wild-type AE17 strain. AE18, AE19, and AE20 showed significant decreases in motility of 70.97%, 83.87%, and 37.1%, respectively, in comparison with AE17. Moreover, in comparison with AE17, AE18, AE19, and AE20 showed significant decreases of 63.11%, 65.42%, and 30.26%, respectively, in CEF cell adhesion, and significant decreases of 59.83%, 57.82%, and 37.90%, respectively, in CEF cell invasion. In comparison with AE17, transcript levels of sodA, polA, and iss were significantly decreased in AE18, while transcript levels of fimC and iss were significantly decreased in AE19. Our results demonstrate that deletion of PhoP or PhoQ inhibits invasion and adhesion of APEC to CEF cells and significantly reduces APEC virulence by regulating transcription of virulence genes.
Źródło:
Polish Journal of Veterinary Sciences; 2016, 19, 1
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal design and numerical simulation on fish-like flexible hydrofoil propeller
Autorzy:
Xue, G.
Liu, Y.
Zhang, M.
Zhang, W.
Zhang, J.
Luo, H.
Jia, R.
Powiązania:
https://bibliotekanauki.pl/articles/259984.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
bionics
flexible hydrofoil
phase angle
hydrodynamic coefficient
Opis:
Hydrofoil is widely used in underwater vehicle for the excellent hydrodynamic characteristics. Currently, researches are mostly about the rigid hydrofoil while the flexible hydrofoil, like the caudal fin, has not been studied adequately. In this paper, the fish was regarded as the bionic object. Then the kinematics model to describe the fish swimming was put forward. A fin-peduncle propulsion mechanism was designed based on the kinematics model to achieve the similar sine curve swimming model. The propulsion mechanism was optimized by Matlab to reduc the deviation between the output curve of the fin-peduncle propulsion mechanism and the ideal motion trajectory. Moreover, the motion phase angles among flexible articulations are optimized to reduce fluid resistance and improve propulsive efficiency. Finally, the fish-like hydrofoil oscillation is simulated by fluid-solid coupling method based on the Fluent. It was shown that the optimized flexible fish-like oscillation could generate the motion that follows the similar law of sine. The propulsive efficiency of oscillating hydrofoil propeller is much higher than that of the screw propeller, and the flexible oscillation has higher propulsive efficiency than the rigid oscillation without obvious fluid resistance increase.
Źródło:
Polish Maritime Research; 2016, 4; 59-66
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of inorganic powders used for preparation of waterproof coating to coal mine roadways
Badanie proszków nieorganicznych stosowanych do przygotowania wodoodpornych powłok jezdni w kopalniach węgla
Autorzy:
Song, H.
Liu, J.
Xue, F.
Cheng, F.
Powiązania:
https://bibliotekanauki.pl/articles/947175.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
waterproof coating
coal mine roadway
adhesive
inorganic filler
powłoka wodoodporna
jezdnia w kopalni węgla
spoiwo
napełniacz nieorganiczny
Opis:
The new coatings based on styrene-acrylate copolymer with solid powder additives were prepared. Solid additives were one of three types of adhesives (white cement, Portland cement, and alumina cement) and one of four inorganic fillers (quartz powder, talcum powder, calcium carbonate powder, and fly ash). The coatings were tested by determination of surface drying time, hard drying time, tensile strength, and elongation at break. The ratio of water absorption after 7 days was also measured. The results showed that white cement was the best inorganic adhesive with optimal amount of 40–50 wt % in solid powder part. Quartz powder served as better inorganic filler compared with talcum powder and calcium carbonate powder. Fly ash could also be used as good inorganic filler but in amount lower than 10 wt %. Thus prepared coatings satisfy requirements for class III according to GB/T23445-2009 standard.
Przygotowano nowe powłoki na bazie kopolimeru styren-akrylan z dodatkiem proszków stałych. Dodatki stałe stanowiły jeden z trzech rodzajów spoiwa (cement biały, cement portlandzki i cement glinowy) oraz jeden z czterech napełniaczy nieorganicznych (kwarc w postaci proszku, talk, sproszkowany węglan wapnia oraz popiół lotny). Powłoki badano przez określanie czasu suszenia powierzchni, czasu całkowitego suszenia, wytrzymałości na rozciąganie i wydłużenia przy zerwaniu. Wyznaczano również współczynnik absorpcji wody po 7 dniach. Badania wykazały, że najlepszym spoiwem nieorganicznym jest cement biały wilości 40–50 % mas. Proszek kwarcowy jest lepszym napełniaczem nieorganicznym niż talk lub sproszkowany węglan wapnia. Stwierdzono również, że dobrym napełniaczem nieorganicznym są popioły lotne, ale mogą być stosowane tylko w ilości mniejszej niż 10 % mas. Tak przygotowane powłoki spełniają wymagania klasy III według normy GB/T 23445-2009.
Źródło:
Polimery; 2016, 61, 11-12; 844-849
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study on fracturing coal seams using CaO demolition materials to improve permeability
Autorzy:
Tang, Y.
Yuan, L.
Xue, J
Duan, C.
Powiązania:
https://bibliotekanauki.pl/articles/92132.pdf
Data publikacji:
2017
Wydawca:
Główny Instytut Górnictwa
Tematy:
soundless chemical demolition
coal seam
gas drainage
CaO
pokład węgla
odmetanowanie
Opis:
Currently, methane gas disasters in underground coal mines are a major problem which seriously threatens safe mining. This study employed soundless chemical demolition for fracturing coal seams with low permeability. Additionally, the fracturing theory and failure mechanisms of soundless chemical demolition agents were investigated. Materials such as CaO, naphthalene-based water reducer, sodium gluconate and silicate cement were used to prepare the novel soundless chemical demolition agent, whose optimum proportion was discovered to be 90:3:5:7 by carrying out orthogonal experiments. The innovative demolition agent cracked briquettes and the maximum width of cracks reached 16.33 mm, showing significant potential for improving the permeability of coal seams.
Źródło:
Journal of Sustainable Mining; 2017, 16, 2; 47-54
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Horizontal transfer and functional evaluation of high pathogenicity islands in Avian Escherichia coli
Autorzy:
Tu, J.
Qi, K.
Song, X.
Xue, T.
Ji, H.
Shao, Y.
Liu, H.
Zhou, X.
Zhu, L.
Powiązania:
https://bibliotekanauki.pl/articles/30119.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
High pathogenicity islands (HPIs) in Escherichia coli encode genes that are primarily involved in iron uptake and regulation, and confer virulence and pathogenicity. The aim of this study was to investigate the transfer of HPIs in avian E. coli and identify the function of HPI in the acceptor strain. The HPI transfer strain was obtained under conditions of low temperature and low iron abundance, and the donor and acceptor strains were confirmed. E. coli HPIs are transferred by horizontal gene transfer events, which are likely mediated primarily by homologous recombination in HPI-adjacent sequences. Assays for biological activity and pathogenicity changes in the acceptor strain indicated that HPIs might not be involved in pathogenesis in avian E. coli, and thus the main function of HPIs in this strain of bacteria may be to regulate iron nutrition.
Źródło:
Polish Journal of Veterinary Sciences; 2017, 20, 2
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies