Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Xu, Peng" wg kryterium: Autor


Wyświetlanie 1-15 z 15
Tytuł:
Abnormal phase removing method in phase measuring profilometry
Autorzy:
Xu, X.
Cao, Y.
Chen, C.
Cao, S.
Peng, K.
Powiązania:
https://bibliotekanauki.pl/articles/173504.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
information optics
phase measuring profilometry
phase shifting algorithm
phase error
phase auto-extracting
Opis:
An abnormal phase removing method in phase measuring profilometry is proposed. In the five equal shifting phase steps algorithm, the shifting phase might be extracted from the deformed patterns captured by CCD camera. But there may be some errors introduced by a digital fringe projector and CCD camera in these deformed patterns. The impurity of the deformed patterns may lead to four classes of abnormalities when extracting the shifting phase. These abnormalities may cause the wrong shifting phase extraction by which the reconstructed object might be misshapen or anamorphic, or even in failure. By this proposed method, the above abnormalities can be removed, and the shifting phase can be auto-extracted precisely from the impure deformed patterns without knowing its value. Experimental results verify the feasibility and effectiveness of the proposed method.
Źródło:
Optica Applicata; 2017, 47, 1; 85-95
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Facile Synthesis and Characterization of Novel CdS/BiOI Heterojunctions with Enhanced Visible-Light Photocatalytic Performances
Autorzy:
Fang, Shanshan
Lu, Min
Zhou, Man
Li, Zhongyu
Xu, Song
Peng, Yanyan
Li, Qinchi
Lu, Dayong
Powiązania:
https://bibliotekanauki.pl/articles/1030343.pdf
Data publikacji:
2017-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
CdS/BiOI heterojunctions
visible-light photocatalyst
photocatalytic activity
nanocomposites
Opis:
Novel CdS/BiOI heterojunction photocatalysts were successfully prepared by facile method. The as-prepared samples were characterized by transmission electron microscopy, field-emission scanning electron microscopy, X-ray diffraction, the Raman spectroscopy, UV-vis diffuse reflectance spectra, the Fourier transform infrared spectra, and photoluminescence. It was found that CdS nanoparticles were uniformly distributed on the surface of BiOI microspheres. The photodegradation tests showed that the photocatalytic efficiency was increased at first and then decreased when further increasing CdS content in the nanocomposites. The highest activity was obtained by 3%-CdS/BiOI nanocomposites. The enhanced photocatalytic performances were attributed to the matched band potentials of CdS and BiOI, which resulted in the efficient separation of photogenerated electron-hole pairs. Based on the experimental results, a reasonable photocatalytic mechanism of CdS/BiOI photocatalysts was also proposed.
Źródło:
Acta Physica Polonica A; 2017, 131, 2; 263-270
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Mechanical Behavior of Mg-0.5Si-xSn Alloys
Autorzy:
Fu, X.
Yang, Y.
Ma, Q. Y.
Peng, X.
Xu, T.
Powiązania:
https://bibliotekanauki.pl/articles/379670.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
low silicon magnesium alloy
eutectic Mg2Si
microstructure behavior
mechanical behavior
stop magnezu
stop Mg2Si
zachowanie mechaniczne
Opis:
Mg-0.5Si-xSn (x=0.95, 2.9, 5.02wt.%) alloys were cast and extruded at 593K (320 ºC) with an extrusion ratio of 25. The microstructure and mechanical properties of as-cast and extruded test alloys were investigated by OM, SEM, XRD and tensile tests. The experimental results indicate that the microstructure of the Mg-0.5Si-xSn alloys consists of primary α-Mg dendrites and an interdendritic eutectic containing α-Mg, Mg2Si and Mg2Sn. There is no coarse primary Mg2Si phase in the test alloys due to low Si content. With the increase in the Sn content, the Mg2Si phase was refined. The shape of Mg2Si phase was changed from branch to short bar, and the size of them were reduced. The ultimate tensile strength and yield strength of Mg-0.52Si-2.9Sn alloy at the temperature of 473K (200 ºC) reach 133MPa and 112MPa respectively. Refined eutectic Mg2Si phase and dispersed Mg2Sn phase with good elevated temperature stability are beneficial to improve the elevated temperature performance of the alloys. However, with the excess addition of Sn, large block-like Mg2Sn appears around the grain boundary leading to lower mechanical properties.
Źródło:
Archives of Foundry Engineering; 2017, 17, 4; 179-184
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite Element Treatment of Vortex States in 3D Mesoscopic Cylindrical Superconductors in a Tilted Magnetic Field
Autorzy:
Peng, Lin
Hu, Yahua
Li, Zhijian
Deng, Ke
Zhu, Yanyan
Xu, Li
Zhou, Yun
Powiązania:
https://bibliotekanauki.pl/articles/1030584.pdf
Data publikacji:
2018-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
three-dimensional mesoscopic cylinders
TDGL equations
finite element method
vortex states
Opis:
The time-dependent Ginzburg-Landau equations have been solved numerically by a finite element analysis for the mesoscopic superconducting samples with cylindrical shape in a uniform axial magnetic field. We obtain the different vortex patterns as a function of the applied field perpendicular to its surface. We find that multi-vortex states are ground state in three-dimensional mesoscopic cylinders. These results show that our approach is an effective and useful to interpret experimental data on vortex states in the mesoscopic superconductors.
Źródło:
Acta Physica Polonica A; 2018, 133, 1; 152-156
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of organic cultivation pattern on tomato production: plant growth characteristics, quality, disease resistance, and soil physical and chemical properties
Autorzy:
Feng, X.
Xu, Y.
Liu, D.
Peng, L.
Dong, J.
Yao, S.
Feng, Y.
Feng, Z.
Li, F.
Hu, B.
Powiązania:
https://bibliotekanauki.pl/articles/12703546.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
Tomato (Solanum lycopersicum L.) is one of the world’s most important cultivated vegetable. In the traditional cultivation methods, the excessive use of pesticides and fertilizers leads to an imbalance of nutrient elements in the soil, an increase in pests and diseases and a decrease in vegetable quality and yield. In the face of increasingly serious environmental and food problems, organic agriculture is considered to be an effective solution. In this experiment, the effects of organic cultivation patterns on the growth, quality, disease resistance in tomatoes, and the physical and chemical properties of soil were studied by different treatments. The results showed that the application of effective microorganisms (EM) bio-organic fertilizer in the cultivation process can significantly improve the yield, quality, and antioxidant enzyme activity of tomato. The use of straw mulching was found to significantly increase the growth, chlorophyll content, transpiration rate, and soluble sugar content of tomatoes. The application of EM bio-organic fertilizer or straw mulching significantly increased the activity of antioxidant enzyme and the expression of LeCHI gene in tomato leaves and enhanced tomato resistance to diseases. Organic production practices were found to significantly improve the soil.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2020, 19, 1; 71-84
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterization of CL-20 Based Composites by Compressed Air Spray Evaporation
Autorzy:
Xu, Wen Zheng
Peng, Jin Yu
Wang, Jie
Li, Hao
Wang, Jing Yu
Powiązania:
https://bibliotekanauki.pl/articles/358401.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
CL-20
CL-20-based composites
thermal stability
mechanical sensitivity
Opis:
Ultrafine CL-20 particles and three CL-20-based composites were prepared by a compressed air spray evaporation method. All samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and mechanical sensitivity instruments. The results indicated that the thermal stabilities of the CL-20-based composites are better than that of ultrafine CL-20, and that the mechanical sensitivities of ultrafine CL-20 is lower than those of CL-20-based composites. The thermal stability and safety properties of CL-20/Estane 5703 are better than the other samples.
Źródło:
Central European Journal of Energetic Materials; 2020, 17, 1; 66-84
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development and verification of a high-precision laser measurement system for straightness and parallelism measurement
Autorzy:
Xu, Peng
Li, Rui Jun
Zhao, Wen Kai
Chang, Zhen Xin
Ma, Shao Hua
Fan, Kuang Chao
Powiązania:
https://bibliotekanauki.pl/articles/1849006.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
straightness
parallelism
laser measurement system
machine tool
Opis:
A laser measurement system for measuring straightness and parallelism error using a semiconductor laser was proposed. The designing principle of the developed system was analyzed. Addressing at the question of the divergence angle of the semiconductor laser being quite large and the reduction of measurement accuracy caused by the diffraction effect of the light spot at the long working distance, the optical structure of the system was optimized through a series of simulations and experiments. A plano-convex lens was used to collimate the laser beam and concentrate the energy distribution of the diffraction effect. The working distance of the system was increased from 2.6 m to 4.6 m after the optical optimization, and the repeatability of the displacement measurement is kept within 2.2 m in the total measurement range. The performance of the developed system was verified by measuring the straightness of a machine tool through the comparison tests with two commercial multi-degree-of-freedom measurement systems. Two different measurement methods were used to verify the measurement accuracy. The comparison results show that during the straightness measurement of the machine tool, the laser head should be fixed in front of the moving axis, and the sensing part should move with the moving table of the machine tool. Results also show that the measurement error of the straightness measurement is less than 3 m compared with the commercial systems. The developed laser measurement system has the advantages of high precision, long working distance, low cost, and suitability for straightness and parallelism error measurement.
Źródło:
Metrology and Measurement Systems; 2021, 28, 3; 479-495
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development and verification of a high-precision laser measurement system for straightness and parallelism measurement
Autorzy:
Xu, Peng
Li, Rui Jun
Zhao, Wen Kai
Chang, Zhen Xin
Ma, Shao Hua
Fan, Kuang Chao
Powiązania:
https://bibliotekanauki.pl/articles/1849049.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
straightness
parallelism
laser measurement system
machine tool
Opis:
A laser measurement system for measuring straightness and parallelism error using a semiconductor laser was proposed. The designing principle of the developed system was analyzed. Addressing at the question of the divergence angle of the semiconductor laser being quite large and the reduction of measurement accuracy caused by the diffraction effect of the light spot at the long working distance, the optical structure of the system was optimized through a series of simulations and experiments. A plano-convex lens was used to collimate the laser beam and concentrate the energy distribution of the diffraction effect. The working distance of the system was increased from 2.6 m to 4.6 m after the optical optimization, and the repeatability of the displacement measurement is kept within 2.2 m in the total measurement range. The performance of the developed system was verified by measuring the straightness of a machine tool through the comparison tests with two commercial multi-degree-of-freedom measurement systems. Two different measurement methods were used to verify the measurement accuracy. The comparison results show that during the straightness measurement of the machine tool, the laser head should be fixed in front of the moving axis, and the sensing part should move with the moving table of the machine tool. Results also show that the measurement error of the straightness measurement is less than 3 m compared with the commercial systems. The developed laser measurement system has the advantages of high precision, long working distance, low cost, and suitability for straightness and parallelism error measurement.
Źródło:
Metrology and Measurement Systems; 2021, 28, 3; 479-495
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development and verification of a high-precision laser measurement system for straightness and parallelism measurement
Autorzy:
Xu, Peng
Li, Rui Jun
Zhao, Wen Kai
Chang, Zhen Xin
Ma, Shao Hua
Fan, Kuang Chao
Powiązania:
https://bibliotekanauki.pl/articles/1849061.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
straightness
parallelism
laser measurement system
machine tool
Opis:
A laser measurement system for measuring straightness and parallelism error using a semiconductor laser was proposed. The designing principle of the developed system was analyzed. Addressing at the question of the divergence angle of the semiconductor laser being quite large and the reduction of measurement accuracy caused by the diffraction effect of the light spot at the long working distance, the optical structure of the system was optimized through a series of simulations and experiments. A plano-convex lens was used to collimate the laser beam and concentrate the energy distribution of the diffraction effect. The working distance of the system was increased from 2.6 m to 4.6 m after the optical optimization, and the repeatability of the displacement measurement is kept within 2.2 m in the total measurement range. The performance of the developed system was verified by measuring the straightness of a machine tool through the comparison tests with two commercial multi-degree-of-freedom measurement systems. Two different measurement methods were used to verify the measurement accuracy. The comparison results show that during the straightness measurement of the machine tool, the laser head should be fixed in front of the moving axis, and the sensing part should move with the moving table of the machine tool. Results also show that the measurement error of the straightness measurement is less than 3 m compared with the commercial systems. The developed laser measurement system has the advantages of high precision, long working distance, low cost, and suitability for straightness and parallelism error measurement.
Źródło:
Metrology and Measurement Systems; 2021, 28, 3; 479-495
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental analysis of interfacial properties of sphere oblique impact with initial spin
Autorzy:
Wang, Qing-Peng
Wang, Zheng-Feng
Wang, Heng
Li, De-Feng
Gao, Xian-Kun
Xu, Guang-Yin
Powiązania:
https://bibliotekanauki.pl/articles/2086967.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
sphere
spin
oblique impact
contact surface
slip ratio
Opis:
Experiments of a sphere oblique impact with and without an initial spin have been carried out to obtain properties of the impact interface. The contact surface is recorded with a piece of thin carbon paper. The interfacial parameters measured are expressed as axis length, contact area and slip ratio. It is found that for the impact between steels the forward spin can make geometrical sizes of the contact surface increase compared with the case of no initial spin, however, just the reverse for the backward spin. The effect of the initial spin becomes more apparent for the impact with a rubber cushion. Whether the initial spin promotes or hinders the sphere sliding depends on the parameters of tangential velocity and force at the interface.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 2; 213--225
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free vibration of composite cylindrical shells with orthogonal stiffeners
Autorzy:
Wu, Yongfu
Zhao, Chen
Liang, Haofeng
Yao, Sishi
Xue, Jianghong
Xu, Peng
Powiązania:
https://bibliotekanauki.pl/articles/2086971.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
free vibration
laminated cylindrical shells
stiffener
energy method
Opis:
This paper proposes theoretical and numerical approaches to scrutinize the free vibration of orthogonal stiffened cylindrical shells. According to K´arman-Donnell shell theory, the total energy of the stiffened cylindrical shells is derived. Based on the principle of minimum potential energy, the eigenfunction related to the frequency is established and solved by developing a Matlab program. Analytical solutions of the natural frequency for free vibraion of the stiffened cylindrical shells are calculated and are verified against the finite element results from ABAQUS software. On account of the observations from the parametric study, an optimization scheme of the stiffeners is proposed.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 2; 239--252
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification method for power quality disturbances in distribution network based on transfer learning
Autorzy:
Heping, Peng
Wenxiong, Mo
Yong, Wang
Le, Luan
Zhong, Xu
Powiązania:
https://bibliotekanauki.pl/articles/2135730.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
disturbance identification
distribution network
multiple transfer learning
power quality
Opis:
For a higher classification accuracy of disturbance signals of power quality, a disturbance classification method for power quality based on gram angle field and multiple transfer learning is proposed in this paper. Firstly, the one-dimensional disturbance signal of power quality is transformed into a Gramian angular field (GAF) coded image by using the gram angle field, and then three ResNet networks are constructed. The disturbance signals with representative signal-to-noise ratios of 0 dB, 20 dB and 40 dB are selected as the input of the sub-model to train the three sub-models, respectively. During this period, the training weights of the sub-models are transferred in turn by using the method of multiple transfer learning. The pre-training weight of the latter model is inherited from the training weight of the previous model, and the weight processing methods of partial freezing and partial fine-tuning are adopted to ensure the optimal training effect of the model. Finally, the features of the three sub-models are fused to train the classifier with a full connection layer, and a disturbance classification model for power quality is obtained. The simulation results show that the method has higher classification accuracy and better anti-noise performance, and the proposed model has good robustness and generalization.
Źródło:
Archives of Electrical Engineering; 2022, 71, 3; 731--754
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flexible-elastic deformation measurement of ZnS:Cu2+ mechanoluminescent film using visual inspection and digital image correlation
Autorzy:
Gu, Guo-Qing
Xu, Gui-Zhong
Shen, Feng
Zhou, Peng
Sun, Hou-Chao
Weng, Jia-Xing
Powiązania:
https://bibliotekanauki.pl/articles/27311740.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
ZnS:Cu2+-PDMS mechanoluminescent film
flexible-elastic deformation performance
visual inspection
digital image correlation
Opis:
ZnS-based mechanoluminescent film has been widely used in the fields of stress visualization and stress sensing, due to its high brightness and repeatable stable luminescent characteristics. To evaluate the flexible-elastic deformation performance of ZnS-based mechanoluminescent film, both visual inspection and digital image correlation (DIC) are, respectively, employed for measuring the ZnS-based mechanoluminescent film. ZnS:Cu2+ mechanoluminescent powders are first mixed with polydimethylsiloxane (PDMS) matrix to produce ZnS:Cu2+-PDMS mechanoluminescent film. Then, two measurement experiments are, respectively, conducted to investigate the mechanical response and the flexible-elastic deformation performance of the prepared ZnS:Cu2+-PDMS mechanoluminescent film. On one hand, the mechanical response performance of the ZnS:Cu2+-PDMS mechanoluminescent film is validated by visual monitoring of composite concrete fracture processes. On the other hand, the prepared ZnS:Cu2+-PDMS mechanoluminescent film is also measured by DIC to obtain its full-field deformations and strains information. The flexible-elastic deformation performance of the ZnS:Cu2+-PDMS mechanoluminescent film is well demonstrated by the DIC measured results.
Źródło:
Metrology and Measurement Systems; 2023, 30, 2; 353--365
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the modified echo highlight model for underwater vehicles with combined structures
Autorzy:
Xie, Xin
Liu, Fanghua
Jin, Guangwen
Liu, Jinwei
Xu, Cong
Peng, Zilong
Powiązania:
https://bibliotekanauki.pl/articles/34609383.pdf
Data publikacji:
2023
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
modified highlight model
wedge-shaped convex structure
piecewise synthesis method
acoustic scattering calculation software
Opis:
The highlight model is widely used as a simple and convenient method in the radar field but its accuracy is not high. Based on the traditional highlight model, the algorithm has been improved to address the acoustic scattering problems of underwater vehicles with more complex line shapes. The basic idea is to partition the model into micro-bodies to calculate the scattered sound pressure, consider the phase interference of each part, and then synthesise the scattered sound pressure to approximate the target’s actual shape. A computational model of the wedge-shaped convex structure on the back of the underwater vehicles is developed using a highlight model of a trapezoidal plate. The results of the calculations using the highlight model approach are consistent with those of the planar element method. Utilising the modified highlight model method, the accuracy of acoustic scattering characteristics calculations for the stern and overall structures of underwater vehicles has proven satisfactory. Finally, fast acoustic scattering prediction software is developed for underwater vehicles, enabling the calculation of the acoustic scattering characteristics for individual structures, combined structures, and coated silent tiles. This software provides algorithmic support for the fast prediction of the acoustic stealth performance of underwater vehicles.
Źródło:
Polish Maritime Research; 2023, 3; 163-173
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Time-frequency Representation -enhanced Transfer Learning for Tool Condition Monitoring during milling of Inconel 718
Autorzy:
Zhou, Yuqing
Sun, Wei
Ye, Canyang
Peng, Bihui
Fang, Xu
Lin, Canyu
Wang, Gonghai
Kumar, Anil
Sun, Weifang
Powiązania:
https://bibliotekanauki.pl/articles/24200823.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
tool condition monitoring
time-frequency analysis
Markov Transition Field
transfer learning
Opis:
Accurate tool condition monitoring (TCM) is important for the development and upgrading of the manufacturing industry. Recently, machine-learning (ML) models have been widely used in the field of TCM with many favorable results. Nevertheless, in the actual industrial scenario, only a few samples are available for model training due to the cost of experiments, which significantly affects the performance of ML models. A time-series dimension expansion and transfer learning (TL) method is developed to boost the performance of TCM for small samples. First, a time-frequency Markov transition field (TFMTF) is proposed to encode the cutting force signal in the cutting process to two-dimensional images. Then, a modified TL network is established to learn and classify tool conditions under small samples. The performance of the proposed TFMTF-TL method is demonstrated by the benchmark PHM 2010 TCM dataset. The results show the proposed method effectively obtains superior classification accuracies for small samples and outperforms other four benchmark methods.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 2; art. no. 165926
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-15 z 15

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies