Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Warchoł, R." wg kryterium: Autor


Tytuł:
VIS camera studies of the combustion process of pyrotechnic retarders of NGP-76 underwater fifle grenades
Badania za pomocą kamery VIS procesu spalania opóźniaczy piorotechnicznych nasadkowych granatów podwodnych NGP-76
Autorzy:
Miszczak, M.
Warchoł, R.
Gędziorowski, M.P.
Piecuch, M.
Grzeczka, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/32728013.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Medycyny i Techniki Hiperbarycznej
Tematy:
underwater rifle grenade NGP-76
pyrotechnic retarder
multi-segment pyrotechnic column
combustion front
VIS registration
shock wave diver incapacitation
nasadkowy granat podwodny NGP-76
opóźniacz pirotechniczny
wielosegmentowa kolumna pirotechniczna
front spalania
rejestracja VIS
obezwładnianie nurków falą uderzeniową
Opis:
The study presents the combustion process of the multi-segment, low-gas pyrotechnic column of the warhead retarder of the NGP-76 underwater rifle grenade, designed to combat divers with an underwater shock wave. The combustion process, i.e. process from the ignition of the first segment of the retarder to the completion of combustion of its last segment, was recorded with a VIS camera filming at 30 frames per second. The rapid, short combustion of these outermost segments containing zirconium and Pb3O4 (minium) was accompanied by a blinding plume of brightly glowing particles of zirconium dioxide and lead vapor. The combustion of the middle segments formed from the MGS-54 pyrotechnic mixture containing BaCrO4, KClO4 and Sb2S5, determining the duration of the delay, i.e. the delay produced by the retarder, was much slower and longer than that of the outermost segments. During the combustion of each MGS-54 segment, the combustion front took the form of a flat section in the initial part of the segment, i.e. in the area of higher density, while in the further part of the segment (with lower density) the shape of the front became irregular. At the MGS-54 segment boundary, the combustion front halted briefly. Behind the combustion front, a conical tail of luminous solid combustion products became clearly visible at the MGS-54 segment boundary. The gaseous combustion products of the MGS-54 segments, formed in small amounts and revealed as white plumes, were probably KCl vapor and/or sulfur dioxide. After combustion, the retarder column of the MGS-54 segments was green in color due to the presence of chromium compounds, possibly Ba(CrO2)2.
Przedstawiono proces spalania wielosegmentowej, małogazowej kolumny pirotechnicznej opóźniacza głowicy bojowej nasadkowego granatu podwodnego NGP-76, przeznaczonego do zwalczania nurków za pomocą podwodnej fali uderzeniowej. Proces spalania, tj. od zapłonu pierwszego segmentu opóźniacza do zakończenia spalania ostatniego jego segmentu rejestrowano kamerą VIS filmującą z częstotliwością 30 klatek na sekundę. Gwałtownemu, krótkiemu spalaniu tych skrajnych segmentów zawierających cyrkon i Pb3O4 (minię ołowianą) towarzyszył oślepiający snop smug jaskrawo świecących cząstek ditlenku cyrkonu i par ołowiu. Spalanie środkowych segmentów utworzonych z mieszaniny pirotechnicznej MGS-54 zawierającej BaCrO4, KClO4 i Sb2S5, decydujących o czasie trwania opóźnienia, tj. zwłoki wypracowanej przez opóźniacz, przebiegało znacznie wolniej i dłużej niż segmentów skrajnych. Podczas spalania każdego segmentu MGS-54 front spalania przyjmował postać płaskiego odcinka w początkowej części segmentu, tj. w obszarze o większej gęstości, zaś w dalszej części segmentu (o mniejszej gęstości) kształt frontu stawał się nieregularny. Na granicy segmentów MGS-54 front spalania zatrzymywał się na krótko. Za frontem spalania, na odcinku segmentów MGS-54 uwidaczniał się wyraźnie stożkowy ogon świecących, stałych produktów spalania. Gazowymi produktami spalania segmentów MGS-54, powstającymi w niewielkich ilościach, ujawniającymi się w postaci białych smug były prawdopodobnie pary KCl i/lub ditlenek siarki. Po spaleniu kolumna opóźniacza na odcinku segmentów MGS-54 miała kolor zielony spowodowany obecnością związków chromu, prawdopodobnie Ba(CrO2)2.
Źródło:
Polish Hyperbaric Research; 2022, 1(78); 31-42
1734-7009
2084-0535
Pojawia się w:
Polish Hyperbaric Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratory methods for testing the performance of pyrotechnic delay elements
Autorzy:
Warchol, R.
Nita, M.
Powiązania:
https://bibliotekanauki.pl/articles/30146954.pdf
Data publikacji:
2018
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
pyrotechnic delay element
ammunition
X-ray radiography
thermal imaging
Opis:
Pyrotechnic delay elements owing to their simple structure and reliability are very often used as part of the design of ammunition. Their basic task consists in generating a specified delay between the respective actions of two elements/systems, required to ensure the safe and reliable work of ammunition. The paper presents laboratory methods employed for testing the performance of pyrotechnic delay elements (PDEs) used in means of combat. The introductory part describes pyrotechnical delay elements and the task fulfilled by them in ammunition. The next part discusses performance parameters of pyrotechnic delay elements, decisive for their proper operation, and factors influencing such operation. In its main part the article presents the standard defining the laboratory methods to be employed for testing pyrotechnic delay elements. According to the above-mentioned standard, the laboratory methods of testing pyrotechnic delay elements can be divided into tests in the open and closed systems. Further, the paper discusses both types of test systems. Taking account of a wide thematic scope of the discussed issue, this article focuses mainly on presenting new methods of testing pyrotechnic delay elements, which have not been mentioned in the standard. Provided examples of tests of pyrotechnic delay elements have been taken from the Polish and foreign literature. Two methods of testing pyrotechnic delay elements are worth paying special attention, one making use of a thermal imaging camera, and the other relying on Roentgen radiation.
Źródło:
Scientific Journal of the Military University of Land Forces; 2018, 50, 4(190); 101-115
2544-7122
2545-0719
Pojawia się w:
Scientific Journal of the Military University of Land Forces
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quick-Acting Electric Blasting Caps
Szybkodziałające elektryczne spłonki pobudzające
Autorzy:
Nita, M.
Warchoł, R.
Powiązania:
https://bibliotekanauki.pl/articles/403568.pdf
Data publikacji:
2018
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
armament
combat means
electric blasting caps
ignition delay
detonation
uzbrojenie
środki bojowe
elektryczne spłonki pobudzające
detonacja
Opis:
The paper presents the constructions of new, fast-acting electric initiating blasting caps of WN-1 and WN-1A types, developed at the Military Institute of Armament Technology in Zielonka (Poland). These blasting caps have been characterized in terms of the materials used for their production and the applied explosives. The investigation results of selected blasting caps and their most important characteristics are given. Among others, dependence between a response time of a blasting cap and a supply voltage was presented as well as influence of extreme temperatures on its reliability and response time was given. The investigations of the blasting caps for initiation of blasting explosives were performed and the results confirming their usefulness are presented.
W artykule zaprezentowano konstrukcje nowych, szybkodziałających elektrycznych spłonek pobudzających typu WN-1 i WN-1A, opracowanych i wykonywanych w Wojskowym Instytucie Technicznym Uzbrojenia w Zielonce. Spłonki te scharakteryzowano pod względem użytych do ich wykonania materiałów konstrukcyjnych i wybuchowych. Zaprezentowano wyniki wybranych badań spłonek oraz ich najistotniejsze charakterystyki. Przedstawiono między innymi zależności czasu zadziałania spłonek od napięcia zasilania, jak również wpływ skrajnych temperatur na niezawodność i czas zadziałania. Wykonano i zaprezentowano wyniki badań potwierdzających przydatność spłonek do pobudzania ładunków kruszących materiałów wybuchowych.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2018, 9, 2 (32); 111-120
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Czynniki wpływające na parametry pracy pirotechnicznych układów opóźniających
Factors affecting the operating parameters of pyrotechnic delay devices
Autorzy:
Warchoł, R.
Nita, M.
Bazela, R.
Powiązania:
https://bibliotekanauki.pl/articles/234991.pdf
Data publikacji:
2016
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
układ pirotechniczny opóźniający
ładunek pirotechniczny opóźniający
mieszanina pirotechniczna opóźniająca
szybkość spalania
pyrotechnic delay devices
pyrotechnic delay charge
pyrotechnic delay mixture
burning rate
Opis:
W artykule przedstawiono analizę dostępnej literatury na temat czynników wpływających na parametry pracy pirotechnicznych układów opóźniających (PUO). Przedstawione dane pochodzą z raportów z badań, opracowań, głównie pochodzenia zagranicznego. Zasadniczym elementem PUO jest pirotechniczny ładunek opóźniający (PŁO), który może składać się z jednej lub kilku pirotechnicznych mieszanin opóźniających (PMO). Zastosowanie odpowiedniej PMO oraz zachowanie przez nią wymaganych parametrów pracy w trakcie eksploatacji PUO decyduje o jej przydatności w środkach bojowych. W artykule zostały opisane czynniki, które mają wpływ na działanie PUO. Czynniki te zostały podzielone na wewnętrzne, ściśle związane z konstrukcją PUO oraz zewnętrzne. Opisane czynniki wpływające na działanie PUO zostały dodatkowo potwierdzone wynikami z badań. Zebrane informacje mogą być przydatne dla osób zajmujących się projektowaniem oraz badaniem PUO.
The paper analyses information available in literature on factors influencing the parameters of pyrotechnic delay devices (PDD). The literature includes research and development reports of mostly foreign origin. The main component of PDDs is a pyrotechnic delay charge (PDC) which may consist of one or more pyrotechnic delay mixtures (PDM). The use of appropriate PDM and maintaining its required parameters during service life decides about its usefulness for the ordnance. The paper describes the factors affecting the operation of PDDs. These factors are divided into internal ones, closely related to the structure of PDDs, and external ones. Described factors affecting the operation of PDDs were additionally illustrated by test results. Collected information can be useful for people involved in designing and testing the PDDs.
Źródło:
Problemy Techniki Uzbrojenia; 2016, 45, 140; 87-106
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
X-ray Investigation of Combustion Phenomena Occurring in Certain Pyrotechnic Elements Used in Military Ammunition
Autorzy:
Miszczak, M.
Warchoł, R.
Nita, M.
Powiązania:
https://bibliotekanauki.pl/articles/358865.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
military ammunition
pyrotechnic charges
delay element
tracer
combustion
burning surface
Real-Time X-ray Radioscopy (RTR)
Opis:
Investigation using Real-Time X-ray Radioscopy (RTR) of the combustion processes occurring in two different configurations of pyrotechnic items, currently used in ordnance in service with the Polish Armed Forces, are presented. In the first configuration, employed in the delay elements of the RGM type of impact artillery fuses, the end-burning delay pyrotechnic column in its narrower part ended with cavity, is situated in front of the inlet of the axial channel of the output tubular pyrotechnic augmenting charge. In the second configuration, utilized in tracers of anti-tank guided missiles, the end-burning pyrotechnic charge with an ignition cavity is inserted into the steel body and closed hermetically at both ends by plastic discs. In each configuration, ignition of the tested item was initiated by an electric fusehead system. The RTR sequence of images (30 fps) of the combustion of the tested items showed that the burning surface of their pyrotechnic charges were distinguished as a boundary between the unburnt part of the pyrotechnic charge and its distinctly less dense combustion products. For selected time points in the combustion process, the shape and position of such boundaries were captured. From these data, it was possible to discover more about the combustion phenomena occurring in these tested items, including the evolution and movement of the burning surface. The combustion processes of the tested pyrotechnic delay elements and tracers, were occurring in accordance with the intended (expected) scenarios, i.e. all of the pyrotechnic charges were successively and totally consumed, and during their combustion there were no premature effects resulting in a shortening of their burning time.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 3; 770-777
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metody rentgenograficznej w badaniach środków bojowych
Application of X-ray method for testing munitions
Autorzy:
Nita, M.
Warchoł, R.
Kasprzak, P.
Czerwińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/236285.pdf
Data publikacji:
2016
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
badania rentgenograficzne
uzbrojenie
amunicja artyleryjska
zapalnik
X-ray testing
ordnance
artillery ammunition
fuse
Opis:
W artykule zaprezentowano wybrane wyniki badań nieniszczących środków bojowych znajdujących się na wyposażeniu Sił Zbrojnych RP, wykonanych aparatem rentgenowskim typu MU-17F-225-9 firmy YXLON. Badania prowadzono w celach diagnostycznych, ze względu na ich ogromne znaczenie w procesie oceny stanu środków bojowych. Uzyskane wyniki decydują również o wyborze metodyki późniejszych badań.
Some results of non-destructive tests of explosive ordnance (munitions) used by the Polish Armed Forces and performed by X-ray apparatus MU-17F-225-9 from YXLON are presented in the paper. Tests were performed in diagnostic purposes as they are significant for munitions status evaluation process. Received results decide also about the selection of final testing methodology.
Źródło:
Problemy Techniki Uzbrojenia; 2016, 45, 139; 107-119
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorpcja acetonu na materiałach ilastych
Acetone adsorption onto clay minerals
Autorzy:
Pliś, I.
Warzybok, M.
Prokop, W.
Petrus, R.
Warchoł, J.
Powiązania:
https://bibliotekanauki.pl/articles/297543.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
adsorpcja
aceton
bentonit
modyfikacja chemiczna
interkalacja
adsorption
acetone
bentonite
chemical modification
intercalation
Opis:
Celem niniejszej pracy było porownanie adsorpcji par acetonu na węglu aktywnym i naturalnych adsorbentach opartych na bentonicie. Naturalny bentonit poddano chemicznej modyfikacji poprzez dealuminację kwasem HCl, wymianę jonową solami: chlorkiem cezu (CsCl) i bromkiem tetrametyloamoniowym (TMA-Br) oraz interkalację. Otrzymane adsorbenty zastosowano do adsorpcji par acetonu. Badania przeprowadzono w warunkach kolumnowych w specjalnie do tego celu zbudowanej instalacji laboratoryjnej, składającej się z butli zawierającej mieszaninę par acetonu w azocie o danym stężeniu, kolumny wypełnionej badanym adsorbentem, przepływomierza oraz analizatora stężeń. Pomiar stężenia acetonu na wylocie z kolumny wykonano (on-line) techniką chromatografii gazowej. Badania przeprowadzono w temperaturze otoczenia pod ciśnieniem atmosferycznym dla wejściowego stężenia acetonu równego 200 ppm. Na materiale modyfikowanym TMA-Br wyznaczono izotermę adsorpcji, którą wykorzystano do modelowania równowagi adsorpcji. Zastosowano równania empiryczne dwu-, troj- i czteroparametrowe.
The aim of the present work was to compare adsorption of acetone vapors on activated carbon and natural adsorbents based on bentonite. Natural bentonite was chemically modified by acidic dealumination using HCl, by cationic exchange with cesium chloride (CsCl) and tetramethylammonium bromide (TMA-Br) salts and by intercalation. There were determined basic physical and chemical properties of the adsorbents and the investigation for acetone adsorption capacity was carried out. For comparative purposes, also active carbon (AC) was tested. The research was realized in a self-made system consisting of a bottle with acetone-nitrogen mixture with given concentration, fixed-bed column with tested adsorbent, flowmeter and concentration analyzer. Concentrations on column inlet and outlet were monitored on-line using gas chromatography technique. The tests were implemented on 0.5 g samples of active carbon, natural bentonite (B) and four modified bentonites: one treated with hydrochloric acid (B-HCl), two modified with Cs+ and TMA+ cations (B-Cs, B-TMA) and one intercalated. Samples were previously dried at 150°C for one hour. The tests were performed for atmospheric pressure, ambient temperature and inlet acetone concentration of 200 ppm. The amounts adsorbed by examined materials were calculated with integral method on the basis of obtained breakthrough curve. Non-modified bentonite (B) had much lower acetone adsorption capacity than modified ones. The determined acetone adsorption capacity followed the order: B-int > B-TMA > B-Cs > B-HCl > B. Using specific method of chemical modification, the acetone adsorption capacity level compared to AC was reached. Surface area (ABET) of AC was 10-times greater than ABET of B-TMA, but in comparison with B-TMA the adsorption capacity of AC was only doubled. Therefore, ABET should not be the only factor determining acetone adsorption onto modified bentonite, but also chemical character of the adsorbent surface ought to be taken into consideration. The isotherm for B-TMA was examined in the temperature of 30°C for vapor pressure range of 0 to 0.5 P/P0. In order to perform modeling of adsorption equilibrium, there were used obtained equilibrium concentrations of acetone in solid and gaseous state. Two-, three- and four-parametric empirical equilibrium models were applied. The non-linear curve fitting was carried out using the Levenberg-Marquardt algorithm. The relationship between two variables (experimental and theoretically predicted) was assessed by the Fisher test, the mean error and the approximation of standard deviation. The best criteria value of statistical tests proved that the best approximation of experimental data was obtained for the Redlich-Peterson model. Moreover, this model reflected the best approximation of experimentally obtained maximum adsorption capacity value (qm,exp). The value of parameter n (n ≠ 1) implied heterogeneity of the B-TMA adsorbent surface and/or multilayer adsorption.
Źródło:
Inżynieria i Ochrona Środowiska; 2015, 18, 2; 233-243
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania procesów spalania mieszanin pirotechnicznych stosowanych w układach opóźniających środków bojowych za pomocą rentgenoskopii w czasie rzeczywistym (RTR)
Investigations of burning process of pyrotechnic compositions applied in delay systems of ordnance using Real Time Roentgenoscopy (RTR)
Autorzy:
Borkowski, J.
Warchoł, R.
Nita, M.
Miszczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/235153.pdf
Data publikacji:
2015
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
układ pirotechniczny opóźniający
ładunek pirotechniczny opóźniający
strefa spalania
strefa zmian gęstości
rentgenoskopia w czasie rzeczywistym
RTR
pyrotechnic delay system
pyrotechnic delay charge
combustion zone
density changing zone
Real Time Roentgenoscopy
Opis:
W artykule przedstawiono eksperymentalne wyniki badań procesów spalania mieszanin pirotechnicznych wykonanych z użyciem rentgenoskopii w czasie rzeczywistym (RTR Real Time Roentgenoscopy). Badanymi mieszaninami pirotechnicznymi zaelaborowane były korpusy pirotechnicznych układów opóźniających (PUO) stosowanych w środkach bojowych będących na wyposażeniu Sił Zbrojnych RP. Mieszaniny pirotechniczne zaprasowane w korpus tworzyły pirotechniczny ładunek opóźniający (PŁO), który w niniejszej pracy miał postać wielosegmentowej kolumny spalającej się papierosowo (ładunki typu „end-burning”). Wykorzystując technikę RTR wykryto i zarejestrowano przemieszczanie się wzdłuż całej długości pirotechnicznego ładunku opóźniającego granicy rozdziału między niespaloną częścią ładunku a jego produktami spalania. Zastosowane w PŁO trzy typy mieszanin pirotechnicznych, charakteryzowały się zróżnicowanym zobrazowaniem na zdjęciach rentgenowskich z powodu różnorodnej gęstości przereagowanej i nieprzereagowanej części PŁO.
The results of experimental investigations on combustion process of pyrotechnic compositions by using Real Time Roentgenoscopy (RTR) are presented in the paper. The bodies of pyrotechnic delay units (PUO – pirotechniczny układ opóźniający) used by the Polish Armed Forces in ordnance were filled by tested pyrotechnic compositions. The pyrotechnic compositions after pressing into a casing create the pyrotechnical delay charge (PŁO – pirotechniczny ładunek opóźniający) that here has a form of a multi-segmented column that burns like cigarette (end-burning charges). Using RTR technique the move of a layer, separating the un-burnt part of the charge and its combusted products, along the whole length of the pyrotechnical delay charge was detected and recorded. Three types of pyrotechnical compositions were used and they produced different X-ray pictures caused by different densities of reacted and un-reacted parts of PŁO.
Źródło:
Problemy Techniki Uzbrojenia; 2015, 44, 134; 79-88
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cechy charakterystyczne zapalników do amunicji małowrażliwej
Characteristics of the Fuzes for Insensitive Ammunition
Autorzy:
Bazela, R.
Krysiński, B.
Nita, M.
Warchoł, R.
Powiązania:
https://bibliotekanauki.pl/articles/403398.pdf
Data publikacji:
2015
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
zapalniki
materiały wybuchowe
amunicja małowrażliwa
fuzes
explosives
insensitive munitions
Opis:
W artykule przedstawiono analizę cech łańcucha ogniowego w aktualnie używanych zapalnikach artyleryjskich. Omówiono również wymagania stawiane elementom zapalnika zawierającym materiały wybuchowe pod kątem użycia w amunicji małowrażliwej. Przestawiono też propozycje prowadzenia kierunków prac mających na celu opracowanie konstrukcji nowych zapalników, bezpieczniejszych w użytkowaniu, o wysokiej skuteczności działania i mogących znaleźć zastosowanie w amunicji małowrażliwej.
This article presents an analysis of the characteristics of a firing chain in the currently used artillery fuzes. It also discusses the requirements for fuze elements containing explosives for the use in insensitive ammunitions. Moreover it presents new directions of work aimed at developing construction of new safer for fuzes which may be applied in insensitive munition.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2015, 6, 4 (22); 83-93
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current trends in development of military explosives
Autorzy:
Nita, M.
Warchoł, R.
Powiązania:
https://bibliotekanauki.pl/articles/347298.pdf
Data publikacji:
2015
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
explosive compositions
detonation parameters
insensitive secondary explosives
Opis:
The paper includes and presents available information on the modern explosives tendencies, including insensitive explosives of very good detonation, low-melting, and thermobaric parameters. It presents information on newly created explosive substances with selected characteristics, as well as these already well-tested and introduced to the use.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2015, 1; 69-80
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowy układ inicjowania procesu detonacji
A new detonation initiator
Autorzy:
Nita, M.
Warchoł, R.
Powiązania:
https://bibliotekanauki.pl/articles/235304.pdf
Data publikacji:
2015
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
inicjujące materiały wybuchowe
detonacja
zapalnik
wrażliwość materiału wybuchowego na uderzenie
initiating explosives
detonation
fuse
explosives' sensitivity to impact
Opis:
W pracy zaprezentowano konstrukcję i wyniki badań nowego układu inicjowania procesu detonacji. Układ nie zawiera żadnych inicjujących materiałów wybuchowych, a proces inicjowania detonacji realizowany jest na drodze udarowego oddziaływania linera (korpusu) na kruszący materiał wybuchowy. W badaniach, do napędzania (wybuchowego rozpęczania) linera wykorzystano materiały wysokoenergetyczne, takie jak pentryt lub proch nitrocelulozowy. Zbadano prędkość ekspansji ścianki bocznej linera oraz wyznaczono wartość jej energii kinetycznej. Wyznaczono całkowity czas zadziałania nowego układu inicjowania detonacji oraz potwierdzono jego przydatność do pobudzania detonacji kruszących materiałów wybuchowych.
The design and test results of a new initiator of detonation process are presented in the paper. The system does not include any initiating explosives and the process of initiating the detonation is performed through the impact action of a liner (body) against the high explosive (HE) material. The high energetic materials such as pentryt or nitrocellulose powder were used for propelling (explosive bulging) the liner. The expanding velocity of the liner side wall was investigated and the value of its kinetic energy was determined. Total time of operation for the new detonation initiating unit was determined and its suitability for initiating detonation of HE was confirmed.
Źródło:
Problemy Techniki Uzbrojenia; 2015, 44, 135; 33-47
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of military ammunition in preparatory proceedings
Autorzy:
Warchoł, R.
Nita, M.
Prasuła, P.
Powiązania:
https://bibliotekanauki.pl/articles/347184.pdf
Data publikacji:
2015
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
ammunition
explosive
expertise
preparatory proceedings
Opis:
The article presents methods for the evaluation and testing of munitions of military origin carried out at the investigative stage in the Research and Testing Department of Explosive Ordnance of the Military Institute of Armament Technology (MIAT) in Zielonka. MIAT, due to the profile of activity, qualified personnel and laboratory facilities often receives orders for ammunition expertise, including military origin ammunition of the various services responsible for State security. The article cited laws related to illegal possession of ammunition and explosives, defined the concept of preparatory proceedings and expertise and provided the definitions of ammunition and explosives. The article describes the differences in expertise carried out on ammunition in police laboratories and in MIAT. Further-more, it provides a diagram with stages of MIAT expertise on military origin ammunition. On the basis of the specified proceedings, answers are obtained to the questions. Test methods have been described on the basis of faulty examples of executed expertise. For law enforcement authorities the results provide knowledge, as to the validity of charges relating to offenses.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2015, 2; 115-128
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The human balance system and gender
Autorzy:
Olchowik, G.
Tomaszewski, M.
Olejarz, P.
Warchoł, J.
Różańska-Boczula, M.
Maciejewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/306531.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wzrost
waga
BMI
gender
kobieta
mężczyzna
computerised dynamic posturography
height
weight
women
men
Opis:
The human body balance system is a complex system of organs and mechanisms, which generate postural reactions to counter the displacement from the equilibrium position of the body centre of gravity, and which control eye movement in order to maintain a stable image of the environment. Computerised Dynamic Posturography (CDP) allows for a quantitative and objective assessment of the sensory and motor components of the body balance control system as well as of the integration and adaptive mechanisms in the central nervous system. The aim of this study was to determine the differences, when maintaining body balance, based on the gender of young, healthy people using CDP. The study was carried out on a group of 43 healthy subjects by comparing the effectiveness of the balance system in 22 women and 21 men aged between 20 and 26 years, between 171 and 177 cm in height, and without any clinical symptoms of balance disorders. The men and women were selected such that they did not differ significantly in height and BMI. Using the Equitest posturograph manufactured by NeuroCom International Inc. the following tests were performed: Sensory Organisation Test (SOT), Motor Control Test (MCT) and the Adaptation Test (ADT). The gender of young healthy individuals without any clinical symptoms of balance disorders also does not affect the effectiveness of the sensory system and the use of this signal in maintaining body balance.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 1; 69-74
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
X-ray Investigations of Combustion Phenomena Occurring in Confined Pyrotechnic Charges
Autorzy:
Miszczak, M.
Nita, M.
Warchoł, R.
Powiązania:
https://bibliotekanauki.pl/articles/358892.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
pyrotechnic charges
delay element
combustion
Real-Time X-ray Radioscopy (RTR)
Opis:
Investigation of the combustion processes occurring in end-burning, multi-segment, delay elements of hand-grenade firing-explosive trains using Real-Time X-ray Radioscopy (RTR) are presented. RTR detection, operating at 30 frames per second, registered the development of the combustion process, visualized as the border between the burnt and unburnt parts of the pyrotechnic column, travelling from the ignition (input) end to the output end. This border had a variable shape, ranging from planar to very non-regular. At the end of the combustion process, i.e. during burning of the final-output pyrotechnic segment, the formation of a longitudinal cavity beginning from the output end of the delay element and reaching a depth of nearly 40% of the total length of the pyrotechnic column, was detected. Such strong erosion of the output part of the pyrotechnic column indicates that in the creation of the output combustion products (firing output impulse) of the tested delay element, a relatively significant mass of the pyrotechnic charge was involved.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 3; 553-561
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania diagnostyczne morskich środków bojowych jako element systemu kontroli jakości i bezpieczeństwa w procesie ich eksploatacji
Diagnostic tests of naval munitions an element of quality and safety control system in the process of their use
Autorzy:
Warchoł, R.
Borkowski, J.
Nita, M.
Powiązania:
https://bibliotekanauki.pl/articles/223217.pdf
Data publikacji:
2014
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
bezpieczeństwo eksploatacji amunicji
morskie środki bojowe
badania diagnostyczne
safety of use of ammunition
naval ordnance
diagnostics examinations
Opis:
W artykule opisano rolę badań diagnostycznych jako elementu składowego systemu eksploatacji morskich środków bojowych (MŚB) oraz ich miejsce w tym systemie. Przedstawiono organizację podsystemu kontroli jakości i bezpieczeństwa, podział morskich środków bojowych, krótką charakterystykę ich rodzajów, a także opisano elementy systemu badań diagnostycznych MŚB.
This paper describes the role of diagnostic testing as an element of the system for the use of naval munitions and their importance. It presents the organization of a quality and safety control sub-system, classification and types of munitions, and also describes elements of the system for the diagnostic testing of munitions.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2014, R. 55 nr 2 (197), 2 (197); 119-136
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies