Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, Zhen" wg kryterium: Autor


Tytuł:
Dispersion of sodium phytate on muscovite and the implications for arsenopyrite flotation
Autorzy:
Zou, Dan
Wang, Zhen
Zhao, Kaile
Xu, Ying
Powiązania:
https://bibliotekanauki.pl/articles/2175449.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cassiterite
chlorite
sodium oleate
carboxymethyl cellulose
selective inhibition
Opis:
The effective flotation separation of sulfides and sliming silicate minerals is always a difficult problem. In this paper, the selective flotation of arsenopyrite from muscovite was studied by using sodium phytate (SP) as dispersant, and the mechanism was investigated through SEM/EDS, zeta potential, FTIR and XPS measurements. Single mineral flotation results showed that with the increasing isoamyl xanthate (IAX) dosage the recovery of arsenopyrite increased, until 8×10−5 mol/L IAX (79.40% recovery, pH=7), after that it decreased slightly. While muscovite floated poorly at any IAX concentration. For the mixed minerals, arsenopyrite recovery was only 54.63% while that of muscovite was 42.70%, which was attributed to the coverage of muscovite on arsenopyrite surface. When 6×10−5 mol/L SP was added into the mixed minerals system, the recovery of arsenopyrite recovered to 68.26% while that of muscovite was 8.48% (approximate the value of the single mineral). SEM/EDS results showed that SP could disperse muscovite and prevented its coverage on arsenopyrite surface. Zeta potential results showed that the electrokinetic potential of muscovite and arsenopyrite decrease from -26.60mV to -39.01 mV and from -26.90 mV to -27.84 mV at pH=7, respectively. It was obvious that the negatively charged phytate ions selectively adsorbed on the surface of muscovite. FTIR and XPS resulted co-proved the chemisorption of SP with active sites on muscovite while arsenopyrite spectrum did not change significantly, which was consistent with flotation and zeta potential results. The selective adsorption of SP on muscovite compared to arsenopyrite was responsible for the effective separation of them.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 6; art. no. 154951
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption of yeast dextran on clinochlore surface and the implications for pyrite/clinochlore separation
Autorzy:
Wang, Zhen
Zou, Dan
Zhao, Kaile
Safarov, Sayfidin
Xu, Ying
Powiązania:
https://bibliotekanauki.pl/articles/2146917.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
clinochlore
pyrite
flotation
yeast dextran
adsorption
Opis:
Silicate minerals with a certain degree of flotability are often easy to mix into sulfide ore concentrate in mineral processing industry. In this paper, the adsorption of yeast dextran on clinochlore and its application in pyrite/clinochlore separation were investigated. The adsorbed amount and micro polarity measurement results displayed that the yeast dextran molecules selectively adsorbed onto clinochlore surface compared with pyrite. The adsorbed yeast dextran resulted in the increase in the surface polarity of clinochlore surface, and inhibited the further adsorption of xanthate, thus keep it hydrophilic and depressed. Quantum chemical computation results indicated that yeast dextran was mainly adsorbed on mineral surface by the chelation with the surface metal active sites, and the chelating strength of yeast dextran with three ions was in the sequence of Fe3+ > Mg2+ > Fe2+. While Mg2+, Fe2+ and Fe3+ are the main metal ions on the surface of clinochlore, and Fe2+ is the unique metal ions on pyrite surface. This is the reason of the selectivity of the yeast dextran depressant for pyrite/clinochlore flotation system. The flotation results demonstrated that yeast dextran was qualified to selectively depress clinochlore in pyrite flotation.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 4; art. no. 151635
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heuristic energy-saving virtual network embedding algorithm based on Katz centrality
Autorzy:
Zhu, Qiang
Wang, Qing-Jun
Zang, Mu-Jun
Wang, Zhen-Dong
Xiao, Chang
Powiązania:
https://bibliotekanauki.pl/articles/141679.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
energy-saving virtual network
integer linear programming
Katz centrality
network virtualization embedding
virtualization
Opis:
Current networks are designed for peak loads leading to low utilization of power resources. In order to solve this problem, a heuristic energy-saving virtual network embedding algorithm based on the Katz centrality (Katz-VNE) is proposed. For solving an energy-saving virtual network embedding problem, we introduce the Katz centrality to represent the node influence. In order to minimize the energy consumption of the substrate network, the energy-saving virtual network embedding problem is formulated as an integer linear program, and the Katz-VNE is used to solve this problem. The Katz-VNE tries to embed the virtual nodes onto the substrate nodes with high Katz centrality, which is effective, and uses the shortest paths offering the best factor of bandwidths to avoid the hot nodes. The simulation results demonstrate that the long-term average energy consumption of the substrate network is reduced significantly, and the long-term revenue/cost ratio, the acceptance rate of virtual network requests, and the hibernation rate of substrate nodes as well as links are improved significantly.
Źródło:
Archives of Electrical Engineering; 2020, 69, 3; 595-608
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel method for purification of phosphogypsum
Autorzy:
Wang, Jinming
Dong, Faqin
Wang, Zhaojia
Yang, Feihua
Du, Mingxia
Fu, Kaibin
Wang, Zhen
Powiązania:
https://bibliotekanauki.pl/articles/1845213.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
phosphogypsum
purification
phosphorus
fluorine
building materials
Opis:
Phosphogypsum is an industrial solid waste from the phosphate fertilizer industry. At present, the accumulation of phosphogypsum has caused very serious economic and environmental problems. A large scale of phosphogypsum is consunmed in the building field. The characteristics of whiteness and phosphorus content are important factors affecting the use of phosphogypsum as a building material. In this study, soluble phosphorus and fluorine were removed by adding lime, and flotation was employed to purify phosphogypsum. A large amount of organic matter and fine slime in the phosphogypsum were removed by reverse flotation, and gypsum was floated by positive flotation. Through the flotation closed-circuit experiment, the whiteness of phosphogypsum was increased from 31.5 to 58.4, the percentage of total phosphorus in gypsum (P2O5) was reduced from 1.78 to 0.89, the grade of calcium sulphate dihydrate was 96.6%, the recovery of concentrate was 74.1%. After removing impurities, the phosphogypsum concentrate reached the first grade national standard of the phosphogypsum building materials in China. The method is cheap and practical, and can be used as an important method for pretreatment of phosphogypsum.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 975-983
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved flotation of auriferous arsenopyrite by using a novel mixed collector in weakly alkaline pulp
Autorzy:
Wang, Xiaohui
Zhao, Kaile
Bo, Hui
Yan, Wu
Wang, Zhen
Gu, Guohua
Gao, Zhiyong
Powiązania:
https://bibliotekanauki.pl/articles/1845220.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold mine
arsenopyrite
mixed collector
flotation
Opis:
The purpose of using a mixed collector is to increase both flotation efficiency and selectivity. The mixed collector of potassium isopentyldithiocarbonate and N-dodecyl mercaptan exhibits high efficiency for the flotation of auriferous arsenopyrite, and the 2:1 mixing mass ratio of potassium isopentyldithiocarbonate and N-dodecyl mercaptan is preferred. Batch flotation tests indicate that a concentrate with the grade of 47.58 g/Mg Au and the recovery of 86.45% Au is achieved by using the mixed potassium isopentyldithiocarbonate/N-dodecyl mercaptan in weakly alkaline pulp. The collector mixture potassium isopentyldithiocarbonate + N-dodecyl mercaptan has greater adsorption density on the arsenopyrite surface than other conventional mixed collectors. The mixed potassium isopentyldithiocarbonate/N-dodecyl mercaptan can adsorb onto the arsenopyrite surface by intense chemisorptions, and the Sulfur-Iron chemical complexation is considered as the main adsorption mode. This is the reason why mixed potassium isopentyldithiocarbonate and N-dodecyl mercaptan collector can improve the flotation efficiency of auriferous sulfides.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 996-1004
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel process for extraction of iron from a refractory red mud
Autorzy:
Ding, Wei
Xiao, Junhui
Peng, Yang
Shen, Siyue
Chen, Tao
Zou, Kai
Wang, Zhen
Powiązania:
https://bibliotekanauki.pl/articles/1450194.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
red mud
sodium sulfate
segregation roasting
magnetic separation
iron recovery
Opis:
Red mud is a kind of solid waste produced during alumina extraction from bauxite. To extraction valuable iron from red mud, the technology of adding sodium sulfate-segregation roasting-magnetic separation to treat red mud was developed. During the paper, the effects of various process parameters on the extraction of iron by segregation roasting-magnetic separation were studied, and the phase transformation behavior and microstructure of iron are explored. Repeated test results showed that magnetic concentrate (mass percent), TFe of 80.29 % and overall iron recovery of 92.08 %was obtained. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) results indicated that after the segregation roasting, the hematite was transformed into a new metal phase consisting mainly of metallic iron and magnetite. The addition of sodium sulfate during the segregation roasting can obviously improve the efficiency of segregation roasting-magnetic separation for iron extraction.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 6; 125-136
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on separation of fine-particle ilmenite and mechanism using flocculation flotation with sodium oleate and polyacrylamide
Autorzy:
Peng, Yang
Xiao, Junhui
Deng, Bing
Wang, Zhen
Liu, Nengyun
Yang, Daoguang
Ding, Wei
Chen, Tao
Wu, Qiang
Powiązania:
https://bibliotekanauki.pl/articles/1450088.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sodium oleate
polyacrylamide
synergistic effect
ilmenite
flocculation flotation
Opis:
In this paper, sodium oleate, polyacrylamide, soluble starch and sodium carboxymethyl cellulose were used as flocculants to study the flocculation and sedimentation behavior of microfine ilmenite. Sedimentation test shows that sodium oleate and polyacrylamide have good flocculation effect on ultrafine ilmenite. The flocculation rate of ilmenite can be further improved by the combination of sodium oleate and polyacrylamide. It was found that both flocculants could generate chemical adsorption with ilmenite surface, and they all react with $Fe^{3+}$ on ilmenite surface. However, sodium oleate reacts with $Fe^{3+}$ to form a water-insoluble iron oleate precipitate which coats the surface of the ilmenite and hinders the action of polyacrylamide and the remaining $Fe^{3+}$. This problem can be avoided by adding polyacrylamide followed by sodium oleate, and the flotation recovery can be increased significantly.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 161-172
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strongly continuous integrated C-cosine operator functions
Autorzy:
Wang Wang, Shen
Huang, Zhen
Powiązania:
https://bibliotekanauki.pl/articles/1218869.pdf
Data publikacji:
1997
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Opis:
We extend some recent results for regularized semigroups to strongly continuous n-times integrated C-cosine operator functions. Several equivalent conditions for the existence and uniqueness of solutions of (ACP$_2$) are also presented.
Źródło:
Studia Mathematica; 1997, 126, 3; 273-289
0039-3223
Pojawia się w:
Studia Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Simulation of the Deflagration to Detonation Transition in Granular High-Energy Solid Propellants
Autorzy:
Zhen, Fei
Wang, Liqiong
Wang, Zhuoqun
Powiązania:
https://bibliotekanauki.pl/articles/951503.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
deflagration to detonation transition
two-phase reactive flow model
WENO
solid volume fraction
pressure exponent
Opis:
This paper describes a one-dimensional code developed for analyzing the two-phase deflagration to detonation transition (DDT) phenomenon in granular high-energy solid propellants. The deflagration to detonation transition model was established based on a one-dimensional two-phase reactive flow model involving basic flow conservation equations and constitutive relations. The whole system was solved using a high resolution 5th-order WENO (Weighted Essentially Non-Oscillatory) scheme for spatial discretization, coupled with a 3rd-order TVD Runge-Kutta method for time discretization, to improve the accuracy and prevent excessive dispersion. An inert two-phase shock tube problem was carried out to access the developed code. The DDT process of high-energy solid propellants was simulated and the parameters of detonation pressure, run distance to detonation and time to detonation were calculated. The results show that for a solid propellant bed with solid volume fraction 0.65, the run distance to detonation was about 120 mm, the detonation induced time was 28 μs, and the detonation pressure was 18 GPa. In addition, the effects of solid volume fraction (φs) and pressure exponent (n) on the deflagration to detonation transition were also investigated. The numerical results for the DDT phenomenon are in good agreement with experimental results available in the literature.
Źródło:
Central European Journal of Energetic Materials; 2019, 16, 4; 504-519
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel two-phase interleaved parallel bi-directional DC/DC converter
Autorzy:
Zhang, Baoge
Hong, Deyu
Wang, Tianpeng
Zhang, Zhen
Wang, Donghao
Powiązania:
https://bibliotekanauki.pl/articles/1841340.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bi-directional DC/DC converter
energy storage system
interleaved parallel structure
voltage stress
Z-source network
dwukierunkowy przetwornik DC/DC
system magazynowania energii
przeplatana struktura równoległa
stres napięciowy
Sieć źródłowa Z
Opis:
The energy storage system (ESS) is an important way to improve the power quality of renewable energy sources (such as solar energy and wind energy). A bi-directional DC/DC converter is an essential part of the ESS to achieve bi-directional energy transfer. According to the characteristics of the low-voltage gain and high-voltage stress of switches in the existing bi-directional DC/DC converter, this study proposes a novel two-phase interleaved parallel bi-directional DC/DC converter. The converter can effectively combine the advantages of a Z-source network and interleaved parallel structure. The working principle, the boost mode and buck mode of the converter are analyzed in detail. In addition, the voltage conversion ratios under the two modes are deduced. The control strategy of the two-phase interleaved parallel bi-directional DC/DC converter is introduced in detail. Furthermore, the main working waveforms of the system under each working mode are verified by building a simulation experiment model using MATLAB/Simulink. The simulation results show that the system has advantages of high-voltage gain, low-voltage stress of switches and automatic current sharing between inductors.
Źródło:
Archives of Electrical Engineering; 2021, 70, 1; 219-231
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Enhanced Run-Length Encoding Compression Method for Telemetry Data
Autorzy:
Shan, Y.
Ren, Y.
Zhen, G.
Wang, K.
Powiązania:
https://bibliotekanauki.pl/articles/221755.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
multichannel acquisition system
high compression performance
run-length encoding with error parameter
oversampling
hardware implementation
Opis:
The telemetry data are essential in evaluating the performance of aircraft and diagnosing its failures. This work combines the oversampling technology with the run-length encoding compression algorithm with an error factor to further enhance the compression performance of telemetry data in a multichannel acquisition system. Compression of telemetry data is carried out with the use of FPGAs. In the experiments there are used pulse signals and vibration signals. The proposed method is compared with two existing methods. The experimental results indicate that the compression ratio, precision, and distortion degree of the telemetry data are improved significantly compared with those obtained by the existing methods. The implementation and measurement of the proposed telemetry data compression method show its effectiveness when used in a high-precision high-capacity multichannel acquisition system.
Źródło:
Metrology and Measurement Systems; 2017, 24, 3; 551-562
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Welding Heat Input on Microstructure and Corrosion Characterization in CGHAZ of X80 Pipeline Steel
Autorzy:
Wang, Xue-Mei
Zhao, Wei
Chen, Kai
Li, Zhen
Powiązania:
https://bibliotekanauki.pl/articles/28099607.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
X80 pipeline steel
coarse grain heat-affected zone
heat input
corrosion
Opis:
The coarse-grained heat-affected zone specimens of X80 pipeline steel were produced by welding thermal simulation under different heat inputs of 10, 30, and 55 kJ/cm to study the effects of heat input on microstructure evolution and corrosion characterization. The corrosion resistance of coarse-grained heat-affected zones was poorer than that of base metal due to less homogenous in the former. For 10 kJ/cm coarse-grained heat-affected zone, the corrosion resistance was poorer than the others due to the more adsorption hydrogen around the needle-like martensite/austenite constituents and greater galvanic driving force between the needle-like martensite/austenite constituents and ferrite. In carbonate/bicarbonate solution, better corrosion resistance for coarse-grained heat-affected zones was obtained when the heat input is 30 kJ/cm, which can be attributed to the severe coarse martensite/austenite constituents for 55 kJ/cm coarse-grained heat-affected zone. In the H2S environment, the better corrosion resistance for coarse-grained heat-affected zone was obtained when the heat input is 55 kJ/cm, which can be attributed to the protective effect of corrosion products. In addition, the high content of M/A constituents for 30 kJ/cm CGHAZ was good for hydrogen adsorption, which was adverse to the corrosion resistance in acid environments.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 2; 659--671
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Joint Formation and Mechanical Properties of 2060 Aluminum Alloy Refill Friction Stir Spot Welding Joint
Autorzy:
Shang, Zhen
Zuo, Yingying
Ji, Shude
Wang, Yue
Chai, Peng
Powiązania:
https://bibliotekanauki.pl/articles/2049424.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
refill friction stir spot welding
2060 aluminum alloys
plunge depth
defect characteristics
mechanical properties
Opis:
Refill friction stir spot welding (RFSSW) was used to weld the 2060 aluminum alloy with 2 mm thickness. Joint formation, defect characteristics and mechanical properties were investigated. Results show that stir zone (SZ) is clarified into dynamic recrystallization zone (DRZ) and heat extruded zone (HEZ) due to different microstructural features. The size of void near the hook tip decreases with the increase of the plunge depth. Different hook morphologies are obtained under different plunge depths. The tensile-shear load of joint with the void defect initially decreases and then increases with increasing plunge depth. The mean loads of joints under different plunge depths are in the range of 5.1-5.8 kN. The void separates the hook from lap interface, so the cracks initiating from the hook propagate along the sleeve retreating path. The hook has a larger influence on the tensile-shear load of joint than void. All the tensile specimens present a shear-plug fracture mode.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 153-161
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Battery/super-capacitor HESS applied in DC microgrid
Autorzy:
Zhang, Zhen
Baoge Zhang, Baoge
Wang, Donghao
Li, Ping
Rong, Yao
Powiązania:
https://bibliotekanauki.pl/articles/140713.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
battery
bi-directional DC/DC converter
HESS
super-capacitor
voltage closedloop
Opis:
Energy storage technology (EST) is an effective way to improve the power quality of renewable energy generation (such as solar energy and wind energy), but a single energy storage system (ESS) is difficult to meet the demand for the safe operation of the grid. According to the structure and operation characteristics of the existing battery/super-capacitor hybrid energy storage system (HESS), a battery/super-capacitor HESS is proposed. The working principle and three working modes (the super-capacitor pre-charging cold standby mode, the boost mode and buck mode) of the HESS are analyzed in detail. The state equations of the boost mode and buck mode are derived. The state space average method is used to establish the small signal equivalent model under the buck/boost mode. Moreover, the charge and discharge control strategy of the HESS is obtained by combining the voltage closed-loop control. The simulation model is built in Matlab/Simulink to verify the effectiveness of the proposed HESS and its control strategy. The results show that the HESS and its control strategy can ensure the DC bus voltage has good stability and superior anti-interference, and it can simultaneously provide large current, increase the battery life, and improve the technical economy of energy storage.
Źródło:
Archives of Electrical Engineering; 2020, 69, 2; 379-388
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Threshold effect of economic growth on domestic waste production : evidence from China
Autorzy:
Yang, Li
Wang, Hong-Yan
Yi, Lan
Shi, Xiang-Zhen
Deng, Wei
Powiązania:
https://bibliotekanauki.pl/articles/2203127.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
domestic waste
per capita GDP
source reduction
panel threshold regression model
Opis:
Since the implementation of the compulsory sorting of domestic waste policy in China, the participation rate of residents is low, which leads to the unsatisfactory result of terminal reduction of domestic waste. Therefore, the problem of domestic waste reduction still needs to rely on source reduction. Based on the panel data of 29 provincial capitals in China from 2009 to 2018, this study conducts a comprehensive threshold effect test on per capita GDP and other influencing factors of domestic waste production, conducts panel threshold regression for the factors with threshold value, and explores the nonlinear relationship between per capita GDP and domestic waste production under the influence of different threshold variables. The results show that when the urban population density is less than 272 people/km2, the increase of 1% of per capita GDP will lead to a decrease of 0.251% in the domestic waste production, otherwise, it will lead to an increase of 0.249%; when the per capita consumption expenditure is less than the threshold value of 10,260 yuan/year, the influence coefficient of per capita GDP is 0.155, which increases to 0.207 above the threshold. When the share of tertiary industry is taken as the threshold variable, the two threshold values are 61% and 71% respectively. Through the analysis of control variables, it has been found that population size and amount of courier per capita have significant positive effects on domestic waste production, while gas permeability and the number of non-governmental organizations have significant negative effects.
Źródło:
Archives of Environmental Protection; 2022, 48, 4; 13--24
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies