Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, Z. W." wg kryterium: Autor


Tytuł:
Observation and Control of Interfacial Defects in ZnO/ZnSe Coaxial Nanowires
Autorzy:
Bhutto, W.
Wu, Z.
Cao, Y.
Wang, W.
Kang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1361939.pdf
Data publikacji:
2014-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.23.Hj
61.46.Km
64.70.Nd
68.35.Ct
Opis:
ZnO/ZnSe coaxial nanowires with different ZnO core diameters were synthesized by using a two-step chemical vapor deposition. The scanning electron microscopy images demonstrated that the coaxial nanowires with small ZnO core diameter had the smoother surface than that with large ZnO core diameter. A coherent ZnSe layer with wurtzite structure was observed in the nanowire interface between the ZnO core and the ZnSe shell by high resolution transmission electron microscopy. This coherent layer is beneficial to reduce the defect density and improve the crystal quality by suppressing the phase transition. It was found that the coherent thickness was significantly related to the ZnO core diameter. For the nanowire with large ZnO core, a thin critical thickness of 2 - 3 nm was obtained. As a result, a layer of zinc blende ZnSe appeared outside the nanowire, and a lot of defects existed in the interface between the ZnSe layers with different phase structures. For the nanowire with small ZnO core, however, the critical thickness increased and a coherent coaxial structure was observed with the same lattice spacing in the ZnO core and the ZnSe shell. To obtain defect-free coaxial nanowire, an optimal structure was also proposed by theoretical calculation.
Źródło:
Acta Physica Polonica A; 2014, 125, 4; 994-996
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of sodium petroleum sulfonates with different molecular weights for flotation of kyanite ore
Autorzy:
Chen, B. Z.
Gao, H.
Li, Y.
Jin, J.
Ren, Z.
Wang, W.
Powiązania:
https://bibliotekanauki.pl/articles/109492.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
evaluation
sodium petroleum sulfonate
kyanite
flotation kinetics
entrainment
Opis:
The flotation performance of sodium petroleum sulfonates with different molecular weights was evaluated for flotation of a kyanite ore, by investigating valuable mineral recovery-grade, flotation kinetics and gangue entrainment. The results indicated that the higher molecular weight of agent, the higher final cumulative kyanite recovery was, with the maximum value of 72% being obtained with KY-3 with the molecular weight of 438. The final cumulative kyanite grade initially increased, and then decreased with the molecular weight increasing. In other words, the maximum final cumulative kyanite grade (i.e. 89.05%) was obtained with KY-2 with the molecular weight of 392. The kyanite flotation kinetics followed the first order kinetics well, while the modified flotation rate constant showed a decreasing trend after the initial increase as the molecular weight increased. In addition, the overall entrainment degree decreased with decreasing molecular weight of sodium petroleum sulfonates. The use of KY-2 in kyanite flotation was an attractive option in comparison with KY-1 and KY-3.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 956-968
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isolation and sequence analysis of the complete VP2 gene of canine parvovirus from Chinese domestic pets and determination of the pathogenesis of these circulating strains in beagles
Autorzy:
Chen, M.R.
Guo, X.Y.
Wang, Z.Y.
Jiang, Y.T.
Yuan, W.F.
Xin, T.
Hou, S.H.
Song, T.Q.
Lin, W.D.
Zhu, H.F.
Jia, H.
Powiązania:
https://bibliotekanauki.pl/articles/2087542.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
canine parvovirus
molecular epidemiology
phylogenetic analysis
pathogenesis
Źródło:
Polish Journal of Veterinary Sciences; 2019, 2; 287-296
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterisation of PSA/CNT Composites and Fibres
Wytwarzanie i charakteryzacja kompozytów polisulfonamidowych z udziałem nanorurek węglowych oraz wytworzonych z nich włókien
Autorzy:
Chen, Z.
Xin, B.
Wu, X.
Wang, X.
Du, W.
Powiązania:
https://bibliotekanauki.pl/articles/232490.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
polysulfonamide
nanorurki węglowe
nanokompozyty
własności termiczne
przewodność elektryczna
carbon nanotube
nanocomposites
thermal property
electrical conductivity
Opis:
In this paper, polysulfonamide/carbon nanotube (PSA/CNT) composite solutions with different CNT contents were prepared using the physical blending method. Corresponding composite fibers were extruded and fabricated through a set of wet spinning units, and composite membranes were prepared by the spin-coating method. The PSA/CNT composite fibers and membranes were characterised by means of SEM, FTIR and XRD among others. The mechanical, thermal and electrical properties were also analysed in this study. The experimental results show that CNT at low contents can be distributed homogeneously in the PSA matrix. Furthermore the molecular structure and chemical composition of PSA does not undergo an obvious change. Crystallisation in the PSA can be promoted at low CNT contents because the nano-particles can act as a nucleation agent. Moreover the electrical conductivity of PSA can be improved significantly by the blending of CNT.
Przygotowano szereg zestawów polisulfonamidu i różnej ilości nanorurek węglowych. Z przygotowanego kompozytu wyprodukowano włókna i folie, które zostały scharakteryzowane przez skaningową mikroskopię elektronową, spektroskopię w podczerwieni i dyfrakcję rentgenowską. Analizowano również właściwości mechaniczne, przewodność cieplną i elektryczną otrzymanych próbek. Wyniki wskazują, że przy małym stężeniu nanorurek węglowych mogą one być rozprowadzone jednorodnie w całej matrycy; struktura molekularna i właściwości matrycy PSA nie ulegają zmianie; krystalizacja w matrycy PSA inicjowana jest przez nanorurki; przewodność elektryczna kompozytu zależy w dużym stopniu od ilości dodanych nanorurek.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 5 (94); 21-25
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preventive maintenance strategy optimizing model under two-dimensional warranty policy
Model optymalizacji strategii konserwacji zapobiegawczej w warunkach dwuwymiarowej polityki gwarancyjnej
Autorzy:
Cheng, Z. H.
Yang, Z. Y.
Zhao, J. M.
Wang, Y. B.
Li, Z. W.
Powiązania:
https://bibliotekanauki.pl/articles/302023.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
two-dimensional warranty
imperfect preventive maintenance
availability
gwarancja dwuwymiarowa
niepełna konserwacja zapobiegawcza
dyspozycyjność
Opis:
An effective warranty servicing strategy should be made considering both warranty cost and product availability. Based on the two-dimensional free repair warranty, a strategy combining the imperfect preventive maintenance and minimal repair is proposed where the imperfect preventive maintenances are implemented in a special subregion of the warranty and all other failures are repaired minimally. By modeling the warranty cost and product availability, we derive the optimum warranty servicing strategy and corresponding parameters to minimize the cost-effective of unit time. Finally, we provide a numerical illustration and a comparison with some other strategies.
Efektywna strategia obsługi gwarancyjnej powinna uwzględniać zarówno koszty gwarancji jak i dyspozycyjność produktu. W oparciu o pojęcie dwuwymiarowej gwarancji bezpłatnej naprawy, zaproponowano strategię łączącą niepełną konserwację zapobiegawczą z naprawą minimalną, gdzie działania obsługowe w ramach niepełnej konserwacji zapobiegawczej przeprowadza się w ramach specjalnego podobszaru gwarancji, a wszelkie inne uszkodzenia naprawia się w ramach naprawy minimalnej. Modelując koszty naprawy oraz dyspozycyjność produktu, wyprowadzono optymalną strategię obsługi gwarancyjnej oraz odpowiadające jej parametry w celu zminimalizowania kosztów na jednostkę czasu. Na koniec, proponowane rozwiązanie zilustrowano na przykładzie numerycznym oraz porównano z innymi strategiami
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 3; 365-373
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ca-Modified Co/SBA-15 Catalysts for Hydrogen Production through Ethanol Steam Reforming
Autorzy:
Chiou, J. Y. Z.
Liu, S. W.
Ho, K. F.
Huang, H. H.
Tang, Ch. W.
Wang, Ch. B.
Powiązania:
https://bibliotekanauki.pl/articles/411682.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
cobalt catalysts
ethanol
steam reforming
Opis:
Hydrogen production through steam reforming of ethanol (SRE) over the Ca-modified Co/SBA-15 catalysts was studied herein to evaluate the catalytic activity, stability andthebehavior of coke deposition.The Ca-modified SBA-15 supports were prepared from the Ca(NO3)2•4H2O (10 wt%) which was incorporated to SBA-15 by incipient wetness impregnation (assigned as Ca/SBA-15) and direct hydrothermal (assigned as Ca-SBA-15) method. The active cobalt species from the Co(NO3)2•6H2O (10 wt%) was loaded to SiO2, SBA-15 and modified-SBA-15 supports with incipient wetness impregnation method to obtain the cobalt catalysts (named as Co/SiO2, Co/SBA-15, Co-Ca/SBA-15 and Co/Ca-SBA-15, respectively). The prepared catalysts were characterized by using X-ray diffraction (XRD), temperature programmed reduction (TPR), transmission electron microscopy (TEM) and BET.The catalytic performance of the SRE reaction was evaluated in a fixed-bed reactor.The results indicated that the Co/Ca-SBA-15 catalystwas preferential among these catalysts and the ethanol can be converted completely at 375 °C. The hydrogen yield (YH2) approached 4.76 at 500 °C and less coke deposited. Further, the long-term stabilitytest of this catalyst approached100h at 500 °C and did not deactivate.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 5; 1-16
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Serological and molecular evidence of Coxiella burnetii in samples from humans and animals in China
Autorzy:
El-Mahallawy, H.S.
Kelly, P.
Zhang, J.
Yang, Y.
Wei, L.
Tian, L.
Fan, W.
Zhang, Z.
Wang, C.
Powiązania:
https://bibliotekanauki.pl/articles/49293.pdf
Data publikacji:
2016
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2016, 23, 1
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal combinatorial replacement policy under a given maintenance interval for the combined governor in diesel locomotives
Optymalna strategia wymiany kombinatorycznej dla danej częstotliwości przeglądów regulacji mieszanej w lokomotywach spalinowych
Autorzy:
Gao, W.
Zhang, Z.
Zhou, Y.
Wang, R.
Jiang, L.
Powiązania:
https://bibliotekanauki.pl/articles/302197.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
modele niezawodności
rozkład Weibulla
strategia wymiany kombinatorycznej
lokomotywa spalinowa o mieszanej regulacji
reliability models
mixed-Weibull distribution
combinatorial replacement policy
combined governor of diesel locomotives
Opis:
Combined governor is one of key components in diesel locomotives, as a subcomponent it must meet the existing maintenance periodic of the diesel locomotive, while it is passively replaced or maintained in a midway because of over/under-maintenance in practice. In this paper, four reliability models of a sequential PM cycle are developed using three years of maintenance data of combined governors in one Chinese Railway Bureau to determine its reliability distribution, in which some zero-failure data and censor data are used. Meanwhile, a novel combinatorial replacement (CR) policy is proposed to optimize its preventive maintenance (PM), in which a component is replaced several times using a preventively maintained one in a given operational interval. After that, necessary optimizations are introduced based on the determined reliability models and the maintenance interval given by the PM criterion of diesel locomotives (23000km ~ 25000km), and then the genetic algorithm is also used to solve the constraint optimization function. Results show that the proposed CR policy is the best policy among the existing policy and the general (T, δ) policy, and other results can be viewed as an optional policy when spare components are limited.
Regulacja mieszana jest jednym z kluczowych elementów w lokomotywach spalinowych, i jako taka musi być ujęta w istniejącym systemie konserwacji okresowej lokomotyw spalinowych. W praktyce jednak, podlega ona biernej wymianie lub przedwczesnej konserwacji z powodu niewystarczających lub nadmiernych praktyk utrzymania w ruchu. W niniejszym artykule opracowano cztery modele niezawodnościowe sekwencyjnego cyklu konserwacji zapobiegawczej z wykorzystaniem danych z trzech lat konserwacji mieszanej regulacji jednego Biura Kolei Chińskich w celu ustalenia ich rozkładu niezawodności, przy użyciu wybranych danych nt. nieuszkadzalności oraz danych cenzurowanych. W celu optymalizacji konserwacji zapobiegawczej (PM), zaproponowano nową strategię wymiany kombinatorycznej (combinatorial replacement - CR), w której element składowy zostaje kilkakrotnie zastąpiony innym elementem uprzednio poddanym konserwacji zapobiegawczej w danym okresie eksploatacyjnym. Następnie, wprowadzono konieczne optymalizacje na podstawie opracowanych modeli niezawodnościowych oraz częstotliwości przeglądów podanej w kryteriach konserwacji zapobiegawczej lokomotyw spalinowych (23000 km ~ 25000 km). W dalszej kolejności, wykorzystano algorytm genetyczny do rozwiązania funkcji optymalizacji ograniczeń. Wyniki pokazują, że proponowana strategia CR jest najlepsza spośród istniejących strategii i ogólnych strategii (T, δ); inne wyniki można traktować jako strategię opcjonalną w sytuacji gdy dostępność elementów zamiennych jest ograniczona.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 2; 89-98
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pre-formulation Compatibility Studies of 5-Amino-1H-tetrazole Nitrate with Several Typical Materials by Thermal and Non-thermal Techniques
Autorzy:
Guo, W.
Han, Z.
Lin, Q.
Wang, B.
Powiązania:
https://bibliotekanauki.pl/articles/358375.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
5-ATN
compatibility
energetic materials
Opis:
The aim of the present study was to assess the physicochemical compatibility of a promising energetic salt, 5-amino-1H-tetrazole nitrate (5-ATN), with some typical materials. Thermal techniques (differential scanning calorimetry (DSC) and vacuum stability test (VST)) and non-thermal techniques (X-ray diffractometry (XRD) and Fourier Transform Infrared Spectroscopy (FTIR)) were applied. Five energetic materials (TNT, RDX, HMX, CL-20 and AP) and three common additives (Al, DOS and F2604-2) were tested to evaluate their compatibility with 5-ATN. Based on the DSC results, except for AP that was only partially compatible with 5-ATN, all of the selected materials exhibited good compatible with 5-ATN. The VST test further confirmed the compatibility of the 5-ATN/AP mixtures. Combined with the thermal methods, the FTIR results agreed with the DSC findings. The XRD results showed some differences.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 1; 100-114
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Ships Safety Control System
Autorzy:
Han, X. J.
Meng, X. Y.
Wang, Z. W.
Powiązania:
https://bibliotekanauki.pl/articles/117442.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Safety of Navigation
ships safety
Control System
Ships Safety Control System
Ship Accidents
Human Factor
Control Strategy
Accident Precaution
Opis:
The proportion of main reasons of ships accidents to the whole reasons is discussed in the paper. Among these reasons, human factors are in the majority. So a method to prevent wrong orders sent by a navigator is laid emphasis on. On the basis of this, a ships safety control system is studied. The construction and control principle of the ships safety control system, as well as control strategy, implementation method and key technology are elaborated in the paper.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2009, 3, 1; 19-22
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving Triggering Characteristics for a Surface-Flashover Triggered Vacuum Switch
Autorzy:
He, Z.
Wang, L.
Li, F.
Yao, W.
Dong, M.
Zhao, C.
Powiązania:
https://bibliotekanauki.pl/articles/1807889.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.80.Vp
52.75.Kq
52.25.Mq
Opis:
A surface-breakdown triggered vacuum switch with parallel disk electrodes and semiconductor surface flashover trigger electrode has many advantages, it is easy to be triggered and machined. The resistance of the trigger gap has been increased in terms of modifying the thickness of the semiconductor layer and improving coating process technology. The trigger gap resistance, trigger voltage and trigger waveforms were experimentally tested. The results show that the triggering characteristics can be improved by increasing the trigger resistance.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1019-1021
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical investigation of vanadium oxide film with surface microstructure
Autorzy:
Hong, W.
Wang, Z.
Chen, Q.
Sheng, C.
Gu, G.
Luo, P.
Xie, Y.
Powiązania:
https://bibliotekanauki.pl/articles/174416.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
vanadium oxide
VO2
film
surface microstructure
photonic band edge
dispersion material
Opis:
This paper presents a method to design a surface microstructure of vanadium oxide to enhance optical absorption. This method, using a density of eigenfrequency, can be calculated by a planar wave expand method, to indicate the absorption efficiency of a dispersion material, which can be used as an approach method for further design. Based on this, a nanostructure-based vanadium oxide film is designed and simulated to validate this method. The simulation results show that the tendency of density of eigenfrequency is corresponding to the tendency of optical absorption enhancement. Moreover, this structure can achieve high optical broadband absorption when the material dispersion is considered. High optical absorption enhancement can be achieved by adjusting the geometrical parameters; our maximum overall enhancement absorption ratio was 31.84% at the metal phase, which can be attributed to the enhancement effect of a photonic band edge.
Źródło:
Optica Applicata; 2017, 47, 4; 601-609
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Derivation of formulas in spherical trigonometry based on rotation matrix
Autorzy:
Hsieh, T. H.
Wang, S. Z.
Liu, W.
Zhao, J. S.
Chen, C. L.
Powiązania:
https://bibliotekanauki.pl/articles/116775.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
spherical trigonometry
rotation matrix
spherical triangle
formulas of spherical triangle
nautical mathematics
geometric method
spherical navigation
Astronavigation
Opis:
The formulas of spherical triangle, which are widely used to solve various navigation problems, are the important basic knowledge of nautical mathematics. Because the sine rules and the cosine rules for the sides are the fundamental formulas to derive the other spherical triangle formulas, they are also called the genetic codes of the spherical triangle formulas. In the teaching process, teachers usually use the geometric method to derive and prove these fundamental formulas. However, the derivation of geometric methods is complicated and difficult to understand. To improve the teaching process, this paper proposes the three-dimensional rotation method, which is based on conversion of two cartesian coordinate frames using the rotation matrices. This method can easily and simultaneously derive the sine rules, the cosine rules for the sides, and the five-part formulas (I), and is also helpful to solve different kinds of spherical navigation problems.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 3; 553-558
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of processing parameters on the properties of amphiphilic block copolymer micelles prepared by supercritical carbon dioxide evaporation method
Autorzy:
Jiao, Z.
Wang, Z.
Wang, X.
Fan, W.
Powiązania:
https://bibliotekanauki.pl/articles/778902.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
supercritical carbon dioxide
amphiphilic block copolymer
drug-loaded micelles
processing parameters
optimization
Opis:
The operation parameters for the supercritical carbon dioxide (ScCO2 ) evaporation method greatly affect the properties of the prepared drug-loaded micelles. In this study, the effects of those key parameters on the drug-loading content (LC) and drug entrapment efficiency (EE) are discussed. It is observed that EE and LC of the micelles are slightly increased with the enhancing temperature and the copolymer molecular ratio of hydrophilic/hydrophobic segment, while decreased with the enhancing ScCO2  evaporation rate. The pressure and volume ratio of ScCO2  to H2 O are observed the optimum condition. In addition, the verification experiment is carried out under the obtained optimizing parameters. The prepared micelles exhibit relatively regular spherical shape and narrow size distribution with the EE and LC value of 70.7% and 14.1%, respectively.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 1; 81-86
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response of energy-size reduction to the control of circulating load in vertical spindle pulverizer
Autorzy:
Li, H.
He, Y.
Zhang, Y.
Ge, Z.
Xie, W.
Wang, S.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/110803.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
circulating load control
response of energy-size reduction
mixture grinding
energy efficiency
Opis:
In the vertical spindle pulverizer (VSP), the large circulation ratio and high ash and sulfur contents in circulating load would result in intensive energy consumption and low grinding efficiency. Although the control of circulating load would help increase the energy efficiency, no quantitative study has been conducted due to the high temperature and pressure in the closed VSP. In this study, response of energy-size reduction to the control of circulating load was studied by the experimental simulation method. Coal mixtures with fine/coarse ratio of 11:1, 8:1 and 6:1 were ground by a lab-scale roller mill. Energy-size reductions of the coarse coal were compared to evaluate the influence of circulating load control. Results showed that the product with the coarse coal increased by 30% when the specific breakage energy was 1.0 kWht–1 as the circulation ratio decreased from 11 to 6. Meanwhile, a breakage characteristic index of the coarse coal was two times higher due to the cushioning effect of fines. Besides, decrease of circulation ratio led to increase of the breakage rate of coarse coal, and the energy saving improved by 57%. With the same energy input of 2.0 kWht-1, the yield of –0.09 mm pulverized fuel (PF) increased from 22 to 43%. Therefore, controlling the circulating load is an effective method to improve the breakage rate of coarse coal and energy efficiency for PF generation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 793-801
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies