Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, X. F." wg kryterium: Autor


Wyświetlanie 1-45 z 45
Tytuł:
Identification, evaluation, and application of the genomic-SSR loci in ramie
Autorzy:
Luan, M.-B.
Yang, Z.-M.
Zhu, J.-J.
Deng, X.
Liu, C.-C.
Wang, X.-F.
Xu, Y.
Sun, Z.-M.
Chen, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/57981.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
To provide a theoretical and practical foundation for ramie genetic analysis, simple sequence repeats (SSRs) were identified in the ramie genome and employed in this study. From the 115 369 sequences of a specific-locus amplified fragment library, a type of reduced representation library obtained by high-throughput sequencing, we identified 4774 sequences containing 5064 SSR motifs. SSRs of ramie included repeat motifs with lengths of 1 to 6 nucleotides, and the abundance of each motif type varied greatly. We found that mononucleotide, dinucleotide, and trinucleotide repeat motifs were the most prevalent (95.91%). A total of 98 distinct motif types were detected in the genomic-SSRs of ramie. Of them, The A/T mononucleotide motif was the most abundant, accounting for 41.45% of motifs, followed by AT/TA, accounting for 20.30%. The number of alleles per locus in 31 polymorphic microsatellite loci ranged from 2 to 7, and observed and expected heterozygosities ranged from 0.04 to 1.00 and 0.04 to 0.83, respectively. Furthermore, molecular identity cards (IDs) of the germplasms were constructed employing the ID Analysis 3.0 software. In the current study, the 26 germplasms of ramie can be distinguished by a combination of five SSR primers including Ibg5-5, Ibg3-210, Ibg1-11, Ibg6-468, and Ibg6-481. The allele polymorphisms produced by all SSR primers were used to analyze genetic relationships among the germplasms. The similarity coefficients ranged from 0.41 to 0.88. We found that these 26 germplasms were clustered into five categories using UPGMA, with poor correlation between germplasm and geographical distribution. Our study is the first large-scale SSR identification from ramie genomic sequences. We have further studied the SSR distribution pattern in the ramie genome, and proposed that it is possible to develop SSR loci from genomic data for population genetics studies, linkage mapping, quantitative trait locus mapping, cultivar fingerprinting, and as genetic diversity studies.
Źródło:
Acta Societatis Botanicorum Poloniae; 2016, 85, 3
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Software Startups – A Research Agenda
Autorzy:
Unterkalmsteiner, M.
Abrahamsson, P.
Wang, X. F.
Nguyen-Duc, A.
Shah, S.
Bajwa, S. S.
Baltes, G. H.
Conboy, K.
Cullina, E.
Dennehy, D.
Edison, H.
Fernandez-Sanchez, C
Garbajosa, J.
Gorschek, T.
Klotins, E.
Hokkanen, L.
Kon, F.
Lunesu, I.
Marchesi, M.
Morgan, L.
Oivo, M.
Selig, C.
Seppänen, P.
Sweetman, R.
Tyrväinen, P.
Ungerer, C.
Yagüe, A.
Powiązania:
https://bibliotekanauki.pl/articles/953060.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
software startup
research agenda
software-intensive systems
Opis:
Software startup companies develop innovative, software-intensive products within limited time frames and with few resources, searching for sustainable and scalable business models. Software startups are quite distinct from traditional mature software companies, but also from micro-, small-, and medium-sized enterprises, introducing new challenges relevant for software engineering research. This paper’s research agenda focuses on software engineering in startups, identifying, in particular, 70+ research questions in the areas of supporting startup engineering activities, startup evolution models and patterns, ecosystems and innovation hubs, human aspects in software startups, applying startup concepts in non-startup environments, and methodologies and theories for startup research. We connect and motivate this research agenda with past studies in software startup research, while pointing out possible future directions. While all authors of this research agenda have their main background in Software Engineering or Computer Science, their interestin software startups broadens the perspective to the challenges, but also to the opportunities that emerge from multi-disciplinary research. Our audience is therefore primarily software engineering researchers, even though we aim at stimulating collaborations and research that crosses disciplinary boundaries. We believe that with this research agenda we cover a wide spectrum of the software startup industry current needs.
Źródło:
e-Informatica Software Engineering Journal; 2016, 10, 1; 89-123
1897-7979
Pojawia się w:
e-Informatica Software Engineering Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coupling mechanism and coupling degree measurement model of shipbuilding industry cluster
Autorzy:
Su, Y.
Wang, F.
An, X.
Powiązania:
https://bibliotekanauki.pl/articles/258740.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
coupling mechanism
coupling degree measurement model
shipbuilding industry cluster
Opis:
This article was aimed to analyse the working condition of the coupling mechanism in Chinese shipbuilding industry cluster. Literature review was conducted to unveil the coupling mechanism of shipbuilding industry cluster, providing analysis of the present development of shipbuilding industry. A theoretical model was proposed by using the efficacy function and the capacity of the coupling coefficient while measuring the coupling of the shipbuilding industry cluster. Four coupling characteristics were found including relevant, systemic, diversity, and collaborative in the shipbuilding industry cluster. The shipbuilding industry cluster has two levels of coupling mechanism including the core layer coupling mechanism and the support layer coupling mechanism respectively. The improvement through coupling the core layer, support layer, and the coupling between two levels, is an effective way to achieve long-term stable development in Chinese shipbuilding industry cluster.
Źródło:
Polish Maritime Research; 2016, S 1; 78-85
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elastic-plastic analysis for circumferential through crack at boundary of semi’s brace under beam wave
Autorzy:
Wang, F.
Deng, X.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/260258.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
theoretical model
crack damaged brace
semi-submersible platform
beam wave
Opis:
In order to ensure the safety and reliability of the horizontal brace of semi-submersible platform (SEMI) which functions as the supporting structure in SEMI, this article presents an elastic-plastic method to analyze the variations of the crack tip opening displacement, elastic zone and plastic zone of the cracked section of the horizontal brace under beam wave. The brace of the SEMI was assumed to be located a circumferential through crack at its boundary in this article. In addition, the cracked section of the brace has been divided into crack zone, tensile plastic zone, elastic zone and compressive plastic zone in the presented theoretical model. Moreover, the closed form of the solution has been found in this article which is especially suitable solving complicated problems in practical engineering application. Also, a typical new-generation SEMI that is in practical use was selected to analyze the variation tendency of the cracked brace’s parameters using the proposed model which could give good suggestion to semi-submersible platform designers and managers.
Źródło:
Polish Maritime Research; 2018, 4; 106-113
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxidation of a lignin model compound of benzyl-ether type linkage in water with H2O2 under an oxygen atmosphere catalyzed by Co(Salen)
Utlenianie modelowego związku ligniny z typem wiązania benzylowo-eterowego w wodzie z H2O2 w atmosferze tlenu katalizowane Co(Salen)
Autorzy:
Zhou, X.F.
Qin, J.X.
Wang, S.R.
Powiązania:
https://bibliotekanauki.pl/articles/52363.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Tematy:
oxidation
lignin model compound
benzyl-ether type
linkage
water
oxygen atmosphere
cobalt salen complex
catalytic property
analytical technique
veratrylglycerol-beta-guaiacyl-alpha,gamma-dimethylether
Opis:
The catalytic properties of Cobalt salen? complex in the oxidation of a lignin model compound [veratrylglycerol-β-guaiacyl-α,γ-dimethylether, VGD] have been investigated in order to obtain the mechanistic aspects of the reaction between Co(salen) and VGD under an oxygen atmosphere using hydrogen peroxide as an oxidant. VGD was found to undergo structural changes in response to the catalytic reaction as characterised by different analytical techniques (FT-IR, H-1 NMR and GC-MS), yielding 2-methoxy phenol and biphenyl. A mechanism for the oxidation of VGD was postulated.
Zbadano katalityczne właściwości kompleksu Co(Salen) w utlenianiu modelowego związku ligniny (veratrylglycerol-β-guaiacyl-α,γ-dimetyleter, VGD) w celu określenia mechanicznych aspektów reakcji pomiędzy Co(salen) i VGD w atmosferze tlenu przy zastosowaniu nadtlenku wodoru jako utleniacza. Zaobserwowano, że w VGD zaszły zmiany strukturalne w odpowiedzi na reakcję katalityczną, co przedstawiono za pomocą różnych technik analitycznych (FTIR, H-1 NMR oraz GC-MS). W efekcie otrzymano 2-metoksy fenol i bifenyl.
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2011, 54, 186
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic electric vehicles charging load allocation strategy for residential area
Autorzy:
Wang, Y.
Ma, X.
Wang, F.
Hou, X.
Sun, H.
Zheng, K.
Powiązania:
https://bibliotekanauki.pl/articles/140939.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric vehicles
charging power management
allocation strategy
priority assessment
Opis:
A large amount of electric vehicles (EVs) charging load will bring significant impact to the power system. An appropriate resource allocation strategy is required for securing the power system safety and satisfying EVs charging demand. This paper proposed a power coordination allocation strategy of EVs’ in distribution systems. The strategy divides the allocation into two stages. The first stage is based on scores assigned to EVs through an entropy method, whereas the second stage allocates energy according to EV’s state of charge. The charging power is delivered in order to maximize EV users’ satisfaction and fairness without violation of grid constraints. Simulation on a typical power-limited residential distribution network proves the effectiveness of the strategy. The analysis results indicate that compared with traditional methods, EVs, which have higher charging requirement and shorter available time will get more energy delivered than others. The root-mean-square-error (RMSE) and standard-deviation (SD) results prove the effectiveness of the methodology for improving the balance of power delivery.
Źródło:
Archives of Electrical Engineering; 2018, 67, 3; 641--654
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gradient flow optimization for reducing blocking effects of transform coding
Autorzy:
Gao, F.
Li, X.
Wang, X.
Wee, W. G.
Powiązania:
https://bibliotekanauki.pl/articles/907251.pdf
Data publikacji:
2004
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
przepływ gradientu
efekt blokowania
kodowanie transformatowe
gradient flow
blocking effects
optimization
transform coding
Opis:
This paper addresses the problem of reducing blocking effects in transform coding. A novel optimization approach using the gradient flow is proposed. Using some properties of the gradient flow on a manifold, an optimized filter design method for reducing the blocking effects is presented. Based on this method, an image reconstruction algorithm is derived. The algorithm maintains the fidelity of images while reducing the blocking effects. Experimental tests demonstrate that the presented algorithm is effective.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2004, 14, 1; 105-111
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Visual Detection Method of Longitudinal Crack Based on Computer Image Processing During Slab Continuous Casting
Autorzy:
Liu, Y.
Wang, X.
Sun, Y.
Du, F.
Gao, Y.
Wang, F.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/351636.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
longitudinal crack
visual detection
image processing
continuous casting
Opis:
Based on the mould temperature measured by thermocouples during slab continuous casting, a difference of temperature thermograph is developed to detect slab cracks. In order to detect abnormal temperature region caused by longitudinal crack, the suspicious regions are extracted and divided by virtue of computer image processing algorithms, such as threshold segmentation, connected region judgement and boundary tracing. The abnormal regions are then determined and labeled with the eight connected component labeling algorithm. The boundary of abnormal region is also extracted to depict characteristics of longitudinal crack. Based on above researches, longitudinal crack with abnormal temperature region can be detected and is different from other abnormalities. Four samples of temperature drop are picked up to compare with longitudinal crack on the abnormal region formation, length, width, shape, et al. The results show that the abnormal region caused by longitudinal crack has a linear and vertical shape. The height of abnormal region is more than the width obviously. The ratio of height to width is usually larger than that of other temperature drop regions. This method provides a visual and easy way to detect longitudinal crack and other abnormities. Meanwhile it has a positive meaning to the intelligent and visual mould monitoring system of continuous casting.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 673-680
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trophic connectivity between intertidal and offshore food webs in Mirs Bay, China
Autorzy:
Ning, J.
Du, F.
Wang, X.
Wang, L.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/47613.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
intertidal zonation
offshore zone
food web
different habitat
trophic interaction
stable isotope
carbon isotope composition
Mirs Bay
China
Źródło:
Oceanologia; 2019, 61, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distribution and role of the genus Oithona (Copepoda: Cyclopoida) in the South China Sea
Autorzy:
Wang, L.
Du, F.
Wang, X.
Li, Y.
Ning, J.
Powiązania:
https://bibliotekanauki.pl/articles/47786.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
Oithona
Copepoda
Cyclopoida
temperature
hydrological factor
phytoplankton
ichthyoplankton
South China Sea
Oithona plumifera
Oithona similis
Opis:
The relationships between the small cyclopoid copepod Oithona and hydrological factors, phytoplankton and ichthyoplankton were evaluated using the data obtained in the central South China Sea (SCS) in summer 2014. The genus abundance ranged from 6.00 ind. m3 to 93.75 ind. m3 with high abundance band occurring in the branch of SCS Monsoon Jet. The lower temperature and higher salinity in the surface water of the band than other zones indicated that deep water intrusion was a positive factor for aggregation of the genus. The community structure of the genus was dominated by Oithona plumifera and Oithona similis made up 97% of the genus abundance associated with Oithona tenuis. The result of db-RDA analysis showed that the community structure of the genus was affected by temperature, Chl a, larval fishes and fish spawns, and temperature was the most important limiting factor. The result of GAMs analysis showed that abundance of O. tenuis, and copepodites were affected by Chl a, larval fishes and fish spawns; abundance of O. similis was affected by Chl a and fish spawns; and abundance of O. plumifera was affected by Chl a and larval fishes. Therefore, we suggest that the branch of SCS Monsoon Jet and deep water intrusion favor aggregation of plankton in the central SCS in summer. We confirm that the temperature is the limiting factor to the reproduction of the genus Oithona in tropic seas and the genus Oithona is a food-web linker between primary production and larval fishes in the central SCS.
Źródło:
Oceanologia; 2017, 59, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ship domain model for multi-ship collision avoidance decision-making with COLREGs based on artificial potential field
Autorzy:
Wang, T.F.
Yan, X.P.
Wang, Y.
Wu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/116475.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
ship domain
ship domain model
collision avoidance
colregs
Artificial Potential Field (AFP)
decision-making
Predicted Area of Danger (PAD)
Closest Point of Approach (CPA)
Opis:
A multi-ship collision avoidance decision-making and path planning formulation is studied in a distributed way. This paper proposes a complete set of solutions for multi-ship collision avoidance in intelligent navigation, by using a top-to-bottom organization to structure the system. The system is designed with two layers: the collision avoidance decision-making and the path planning. Under the general requirements of the International Regulations for Preventing Collisions at Sea (COLREGs), the performance of distributed path planning decision-making for anti-collision is analyzed for both give-way and stand-on ships situations, including the emergency actions taken by the stand-on ship in case of the give-way ship’s fault of collision avoidance measures. The Artificial Potential Field method(APF) is used for the path planning in details. The developed APF method combined with the model of ship domain takes the target ships’ speed and course in-to account, so that it can judge the moving characteristics of obstacles more accurately. Simulation results indicate that the system proposed can work effectiveness.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2017, 11, 1; 85-92
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel DOPO-g-KH550 modification wood fibers and its effects on the properties of composite phenolic foams
Autorzy:
Ma, Y.
Geng, X.
Zhang, X.
Wang, C.
Chu, F.
Powiązania:
https://bibliotekanauki.pl/articles/949373.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
DOPO
Wood Fiber
Γ-amino propyl triethoxy silane
Composites
Characterization
Opis:
A novel 9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) graft γ-amino propyl triethoxy silane (KH550) was synthesized and introduced on the surface of wood fi ber. Finally DOPO-g-KH550 treated wood fi ber (DKTWF) was used to prepare DKTWF composite phenolic foams (DKTWFCPF). The structures of DOPO-g- KH550 was acknowledged by Fourier transform infrared (FT-IR) and nuclear magnetic resonance (1 H-NMR). The structures of DKTWF were confirmed by FT-IR. Compared with wood fi ber, the diffraction peaks’ position was basically unchanged, but the crystallinity was slightly increased and thermal stability were dramatically improved, T5%  and Tmax  increased by 21.9° and 36.1° respectively. But the char yield (800°) was slightly reduced. With the dosage of DKWF, there were different degrees of improvement including the mechanical properties, flame retardancy and microstructure of DKTWFCPF. Comprehensive analysis, the interfacial compatibility was signifi cantly improved between DKTWF and phenolic resin, and the suitable content of DKTWF was 4%.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 2; 47-53
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Converged ultra-wideband and multi-level wired signal downstream transport over single wavelength in wavelength-division multiplexing passive optical network
Autorzy:
Ma, H
Wang, F.
Wang, W.
Zhang, X
Yu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/174929.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ultra-wideband (UWB)
multi-level amplitude switch keying (M-ASK)
wavelength-division multiplexing passive optical network (WDM-PON)
Opis:
Simultaneous providing services of ultra-wideband and wired signal over single wavelength can greatly decrease the complexity and reduce the costs of a wavelength-division multiplexing passive optical network. However, ultra-wideband signal occupies the spectrum range from 3.1 to 10.6 GHz, and a narrow idle frequency band (from 0 to 3.1 GHz) could be employed to transport wired signal with a limited rate. In this paper, we proposed a scheme to simultaneously provide ultra-wideband and wired services, in which the information rate of the wired signal is enhanced by employing a multi-level amplitude switch keying signal in the idle frequency band formed by ultra-wideband signal. In comparison with other advanced modulation formats used for wavelength-division multiplexing passive optical networks such as orthogonal frequency division multiplexing, multi-level amplitude switch keying signal can be easily received by using intensity modulation direct detection, which will greatly reduce the cost of end-users. Especially, if a multi-band ultra-wideband signal is substituted for the direct-sequence ultra-wideband signal, the available spectrum range to transport wired signal will be easily extended to 5 GHz as multi-band ultra-wideband signal has a narrower spectrum width and flexible center frequency, so 4-amplitude switch keying signal with a rate of 5 Gbaud will achieve an information rate of 10 Gbit/s.
Źródło:
Optica Applicata; 2015, 45, 4; 433-445
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
AE test of calcareous sands with particle rushing
Autorzy:
Tan, F.
Wang, X.
Hu, M.
Wang, R.
Zhu, C.
Powiązania:
https://bibliotekanauki.pl/articles/259886.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
calcareous sands
accoustic emission
conventional triaxial
consolidated undrained
AE signal
particle crushing
Opis:
The particle of calcareous sands was forced to crush, then the energy from the crushing was released by the form of sound waves. Therefore the AE technique was used to detect the calcareous sands AE signal when it crushed. by to study the AE characteristics, the mechanics of calcareous sands was studied. Study showed that: (1) there was the AE activities on the low confining pressure condition at the beginnig of test, (2) there was more and more AE activities with the continuing of test until to the end, (3) the calcareous sands’ AE activities was on the whole testing, (4) the calcareous sands’ particle crushing and mutual friction played different roles for its AE activities. Then the AE model based on the calcarous sands’ particle crushing was discussed.
Źródło:
Polish Maritime Research; 2017, S 2; 118-124
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Adjustable Thermal Insulations of Tibetan Clothing by Manikin Testing
Ocena możliwości zmian izolacji cieplnej ubiorów tybetańskich przy wykorzystaniu manekina
Autorzy:
Guo, X F
Wang, Y Y
Li, J
Powiązania:
https://bibliotekanauki.pl/articles/232266.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
Tibetan clothing
style
thermal insulation
clothing area factor
thermal manikin
ubiór tybetański
styl
izolacja cieplna
przewodzenie ciepła
manekin termiczny
Opis:
The thermal insulation of clothing needs to be easily adjusted in an unsteady environment, but this is extremely difficult for most clothing. To reveal the effect of different styles of Tibetan clothing on their thermal property, the total thermal insulations of Tibetan clothing in three typical styles were measured using a thermal manikin. The clothing area factors (fcl) of the Tibetan clothing and body surface area covered by a Tibetan robe were tested with a photographic method. The results showed the following: 1) For similar insulation, fcl of Tibetan clothing is about 0.23 bigger than that of western clothing, estimated from ISO 11079; 2)the style of Tibetan clothing significantly affects the fcl (p < 0.05, fcl = 1.229 + 0.007 BSAC) and the intrinsic thermal insulation (p < 0.05, Icl = 0.166 + 0.016 BSAC); 3)the adjustable thermal insulation of Tibetan clothing proved its adaptability to the large air temperature difference environment on the Tibetan plateau ,which should be valuable for the product development of clothing used in a unsteady environment.
Odzież powinna umożliwiać zmianę jej przewodności cieplnej w niestabilnym środowisku, jednak dla większości odzieży jest to niezwykle trudne. W celu określenia wpływu różnych stylów ubiorów tybetańskich na ich właściwości termiczne określono całkowitą izolację termiczna dla trzech typowych stylów odzieży tybetańskiej przy zastosowaniu manekina termicznego. Wpływ konfiguracji ubioru sprawdzono metodą fotograficzną za pomocą termowizji, określając jednocześnie powierzchniowy współczynnik okrycia ciała fcl. Wykazano, że 1) przy podobnej izolacji fcl ubiorów tybetańskich jest o 0.23 większy od ubiorów zachodnich (ISO11079); 2) styl ubiorów tybetańskich znacząco wpływa na fcl jak i wewnętrzną izolacje cieplną; 3) możliwość regulacji izolacji termicznej tybetańskiego ubioru zapewnia zdolność przystosowania się do dużych różnic temperatury otoczenia na płaskowyżu tybetańskim. Wyniki badań mogą znaleźć zastosowanie w projektowaniu odzieży noszonej w niestabilnym środowisku.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 1 (97); 87-91
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A polarization filter at 1550 nm based on photonic crystal fiber with symmetry around gold-coated holes
Autorzy:
Zha, F.
Li, J.
Sun, P.
Wang, X.
Powiązania:
https://bibliotekanauki.pl/articles/173897.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
photonic crystal fiber
polarization filter
finite element method
surface plasmon resonance
Opis:
A polarization photonic crystal fiber based on surface plasmon resonance is proposed in this paper. The photonic crystal fiber with gold coated holes is studied through using the finite element method. The impacts of structural parameters on the resonance characteristics are discussed. Numerical simulations show that the resonance wavelength can be modulated by changing the parameters of the air holes and thickness of gold layer. At the resonance wavelength 1550 nm, the loss is 3.8045 dB/m in x-polarization and the loss is 28464 dB/m in y-polarization by adjusting the size of the gold-coated holes and the place of air holes. Results show that the loss of y-polarized mode is much larger than the loss of x-polarized mode. The y-polarized mode is suppressed, and only x-polarized mode can be guided at the resonance wavelength of y-polarized mode. The results indicate that the mode polarized in one direction can be filtered out selectively by adjusting the diameter of air holes, and the filtering effect in a communication band is achieved.
Źródło:
Optica Applicata; 2018, 48, 4; 609-620
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Explanation of the Optical Spectra and Spin-Hamiltonian Parameters for Nickel(II) in Cadmium Bromide Crystal
Autorzy:
Gong, J.
Wang, L.
Feng, W.
Yang, X.
Zhang, F.
Powiązania:
https://bibliotekanauki.pl/articles/1493631.pdf
Data publikacji:
2011-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.70.Ch
75.10.Dg
61.72.Bb
76.30.Fc
Opis:
Based on crystal- and ligand-field theory, double-spin-orbital coupling approach was used to analyze the crystal-field energy levels and spin-Hamiltonian parameters of $Ni^{2+}$ ion at trigonal site in $CdBr_2$. The local lattice distortion (Δ R and $τ_{Ni^{2+}}$) is estimated from the crystal field parameters; the crystal field energy Hamiltonian was diagonalized in the full basis consisting of 45 wave functions of the $Ni^{2+}$ ion. Results of calculations are in good agreement with experimental data. The reasonableness of the theoretical results is discussed.
Źródło:
Acta Physica Polonica A; 2011, 120, 3; 497-500
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Pb(II) and Zn(II) by Extracellular Polymeric Substance (Eps) of Rhizobium Radiobacter : Equilibrium, Kinetics and Reuse Studies
Autorzy:
Wang, L.
Yang, J.
Chen, Z.
Liu, X.
Ma, F.
Powiązania:
https://bibliotekanauki.pl/articles/204971.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
biosorption
extracellular polymeric substance
EPS
Rhizobium radiobacter
heavy metal
kinetics
Opis:
The extracellular polymeric substance (EPS) produced from Rhizobium radiobacter F2, designated as EPSF2 , was investigated as a biosorbent for the removal of Pb(II) and Zn(II) from aqueous solution. The optimum biosorption pH values were 5.0 for Pb(II) and 6.0 for Zn(II). Kinetics study revealed that the biosorption followed pseudo-first-order model well, and the equilibrium data fit the Langmuir model better. The adsorbed metal ions could be effectively desorbed by HCl. Desrobed EPSF2 regained 80% of the initial biosorption capacity after five cycles of biosorption-desorption-elution. These results demonstrated that EPSF2 could be a promising alternative for Pb(II) and Zn(II) removal from aqueous solution.
Źródło:
Archives of Environmental Protection; 2013, 39, 2; 129-140
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electronic System Fault Diagnosis with Optimized Multi-kernel SVM by Improved CPSO
Diagnoza uszkodzeń układu elektronicznego z wykorzystaniem Wielojądrowej Maszyny Wektorów Nośnych (SVM) zoptymalizowanej przy pomocy poprawionego algorytmu CPSO
Autorzy:
Guo, Y. M.
Wang, X. T.
Liu, C.
Zheng, Y. F.
Cai, X. B.
Powiązania:
https://bibliotekanauki.pl/articles/300922.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
układ elektroniczny
diagnoza uszkodzeń
maszyna wektorów nośnych
optymalizacja metodą chaosu-roju cząstek
funkcja wielojądrowa
electronic system
fault diagnosis
support vector machine (SVM)
chaos particles swarm optimization
multi-kernel
Opis:
Bezpieczeństwo pracy układów elektronicznych stało się kluczowym zagadnieniem w odniesieniu do złożonych układów o wysokiej niezawodności. Obecnie coraz większy nacisk kładzie się na trafność diagnozy uszkodzeń układów elektronicznych. Na podstawie charakterystyki diagnozy uszkodzeń układów elektronicznych, opracowaliśmy model wielokryterialnej klasyfikacji SVM pozwalający osiągnąć lepszą trafność diagnozy uszkodzeń. Model wykorzystuje funkcję wielojądrową składającą się z kilku bazowych funkcji jądrowych pozwalającą na zwiększenie interpretowalności modelu klasyfikacyjnego. Aby zoptymalizować działanie modelu wielokryterialnej klasyfikacji SVM wykorzystującego funkcję wielojądrową, udoskonaliliśmy algorytm Optymalizacji Metodą Chaosu-Roju Cząstek (CPSO), co pozwoliło osiągnąć optymalne parametry SVM i funkcji wielojądrowej. W poprawionym algorytmie CPSO wzmocniono różnorodność wyszukiwania poprzez wykorzystanie chaotycznej sekwencji generowanej przez zmodyfikowaną mapę tent, a także włączono do standardowego algorytmu PSO efektywną metodę pozwalającą uniknąć przedwczesnej stagnacji oraz uzyskać globalne wartości optymalizacji. Wyniki symulacji diagnozy uszkodzeń systemu elektronicznego pokazują, że proponowany system optymalizacji może być wykorzystywany jako skuteczna metoda umożliwiająca znaczne zwiększenie trafności diagnozy uszkodzeń z wykorzystaniem wielojądrowej SVM.
Electronic systems’ safety operation has become a key issue to complex and high reliability systems. Now more emphasis has been laid on the accuracy of electronic system fault diagnosis. Based on the characteristics of the electronic system fault diagnosis, we design a multi-classification SVMs model to attain better fault diagnosis accuracy, which utilizes multi-kernel function consisting of several basis kernel functions to enhance the interpretability of the classification model. In order to optimize the performance of multi-classification SVMs with multi-kernel, we improve the Chaos Particles swarm Optimization (CPSO) algorithm to achieve the optimum parameters of SVMs and the multi-kernel function. For the improved CPSO algorithm, a modified Tent Map chaotic sequence is used to strengthen the search diversity, and an effective method is embedded to the stander PSO algorithm which can ensure to avoid premature stagnation and obtain the global optimization values. The fault diagnosis simulation results of an electronic system show the proposed optimization scheme is a feasible and effective method and it can significantly improve the fault diagnosis accuracy of the multi-kernel SVM.
Źródło:
Eksploatacja i Niezawodność; 2014, 16, 1; 85-91
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrogen sulfide modulates gastric acid secretion in rats via involvement of substance P and nuclear factor-kappaB signaling
Autorzy:
Sun, H.-Z.
Gong, X.-Y.
Wu, L.
Wang, X.-X.
Nie, Y.-N.
Shang, R.
Wang, H.
Li, Y.-C.
Sun, Q.-F.
Gao, P.-F.
Bi, J.-X.
Powiązania:
https://bibliotekanauki.pl/articles/69523.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Fizjologiczne
Tematy:
hydrogen sulphide
gastric acid secretion
rat
nuclear factor-kappaB
substance P
transient receptor potential vanilloid type 1
neurokinin-1
Źródło:
Journal of Physiology and Pharmacology; 2018, 69, 3
0867-5910
Pojawia się w:
Journal of Physiology and Pharmacology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Insensitive HMX (Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) Nanocrystals Fabricated by High-Yield, Low-Cost Mechanical Milling
Autorzy:
Wang, Y.
Jiang, W.
Song, X.
Deng, G.
Li, F.
Powiązania:
https://bibliotekanauki.pl/articles/358912.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
nanoexplosives
HMX
thermal decomposition
sensitivity
Opis:
A mechanical approach had been adopted for fabricating HMX nanoparticles. This fabrication method avoided the recrystallization process and was different from the traditional methods employed to prepare nanoexplosives. In particular, the high yield and low cost increased the possibility of its industrial application. Specifcally, HMX particles, that had a mean size of 0.27 μm, were prepared by mechanical milling; a signifcant proportion of nano-HMX (<100 nm) were present and these were observed by TEM and SEM images. The thermal decomposition of HMX samples before and after pulverization was investigated by TG/DSC analysis. The results indicated that there was no obvious difference between the thermographs of raw and pulverized HMX. The HMX samples were investigated by friction, impact, and shock sensitivity tests. High safety was confrmed since pulverized HMX was far more insensitive than raw HMX; indeed the shock sensitivity of pulverized HMX was about 60 percent lower than that of raw HMX.
Źródło:
Central European Journal of Energetic Materials; 2013, 10, 2; 277-287
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of oxidation on the wetting of coal surfaces by water: experimental and molecular dynamics simulation studies
Autorzy:
Li, E.
Lu, Y.
Cheng, F.
Wang, X.
Miller, J. D.
Powiązania:
https://bibliotekanauki.pl/articles/109792.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wettability
oxidation
molecular dynamics simulation
hydrogen bonding
contact angles
coal surfaces
Opis:
The wettability of coal surfaces by water continues to be one of the key factors which determines the success of coal flotation. Consequently, oxidation of coal surfaces is a fundamental issue of interest. In this work, the effect of oxidation on the wetting of coal surfaces and the interaction between water molecules and oxygen-containing sites at the coal surface was investigated based on advancing/receding contact angle measurements and molecular dynamics simulations. For the simulation studies, a flat coal surface was constructed with the assistance of the molecular repulsion between graphite surfaces and the assembly of Wiser coal molecules. Our results indicated that the simulated advancing and receding contact angles were very similar, and both of them decreased, as expected, with an increase of hydroxyl sites at the coal surface. The good agreement between the simulated advancing/receding contact angles and the experimental receding contact angle values suggested that the configuration of the systems and the set of parameters for the simulation were appropriate. The spreading of water is mainly due to the hydrogen bonds formed between the interfacial water molecules and the hydroxyl sites at the coal surface. The hydroxyl groups show stronger hydration capacity than other oxygen-containing groups according to the calculated hydrogen bonds and interaction energies.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 4; 1039-1051
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
n-sided polygonal hybrid finite elements involving element boundary integrals only for anisotropic thermal analysis
Autorzy:
Cao, R. F.
Zhao, X. J.
Lin, W. Q.
Wang, H.
Powiązania:
https://bibliotekanauki.pl/articles/38597074.pdf
Data publikacji:
2020
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
hybrid finite element
polygon
non-conforming mesh
fundamental solution
anisotropic material
heat conduction
Opis:
As a combination of the traditional finite element method and boundary element method, the n-sided polygonal hybrid finite element method with fundamental solution kernels, named as HFS-FEM, is thoroughly studied in this work for two-dimensional heat conduction in fully anisotropic media. In this approach, the unknown temperature field within the polygon is represented by the linear combination of anisotropic fundamental solutions of problem to achieve the local satisfaction of the related governing equations, but not the specific boundary conditions and the continuity conditions across the element boundary. To tackle such a shortcoming, the frame temperature field is independently defined on the entire boundary of the polygonal element by means of the conventional one-dimensional shape function interpolation. Subsequently, by the hybrid functional with the assumed intra- and inter-element temperature fields, the stiffness equation can be obtained including the line integrals along the element boundary only, whose dimension is reduced by one compared to the domain integrals in the traditional finite elements. This means that the higher computing efficiency is expected. Moreover, any shaped polygonal elements can be constructed in a unified form with the same fundamental solution kernels, including convex and non-convex polygonal elements, to provide greater flexibility in meshing effort for complex geometries. Besides, the element boundary integrals endow the method higher versatility with a non-conforming mesh in the pre-processing stage of the analysis over the traditional FEM. No modification to the HFS-FEM formulation is needed for the non-conforming mesh and the element containing hanging nodes is treated normally as the one with more nodes. Finally, the accuracy, convergence, computing efficiency, stability of non-convex element, and straightforward treatment of non-conforming discretization are discussed for the present n-sided polygonal hybrid finite elements by a few applications in the context of anisotropic heat conduction.
Źródło:
Archives of Mechanics; 2020, 72, 2; 109-137
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acer truncatum seedlings are more plastic than Quercus variabilis seedlings in response to different light regimes
Autorzy:
Guo, X.
Wang, R.-Q.
Wang, C.D.
Xu, F.
Zhao, S.
Guo, W.-H.
Powiązania:
https://bibliotekanauki.pl/articles/41339.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Acer truncatum
seedling
Quercus variabilis
Chinese cork oak
plant response
light regime
irradiance acclimation
chlorophyll fluorescence
morphology
photoinhibition
Opis:
In this study, we investigated responses of the mid-successional species Acer truncatum Bunge and the late-successional species Quercus variabilis Blume to three solar illumination conditions: (1) constant low light (CL), (2) constant high light (CH) and (3) low light first and high light afterwards (LH). The last treatment was to simulate a canopy opening. Both species exhibited increases in biomass, totally and in part, and decreases in leaf water content, specific leaf area and chlorophyll concentrations in LH treatment compared to CL treatment. For A. truncatum, exposure to high light condition (LH) increased crown area, and decreased root to shoot ratio, stem mass ratio and leaf perimeter. However, for Q. variabilis, LH treatment increased stem diameter at ground height, effective quantum yield, photochemical quenching and decreased maximum photosystem II quantum yield. The biomass allocation pattern did not change in Q. variabilis among three light conditions. With respect to newly developed leaves, no significant differences were found in leaf size of Q. variabilis between LH treatment and CH treatment while that of A. truncatum decreased in LH treatment. All chlorophyll fluorescence parameters in newly developed oak leaves in LH treatment increased compared to those of CH treatment while no difference was found for A. truncatum between LH and CH treatment. A. truncatum displayed a greater overall plasticity than Q. variabilis although the oak seedlings have a greater plasticity with respect to chlorophyll concentration and chlorophyll fluorescence parameters. A. truncatum should be a better candidate for vegetation recovery, especially in places with heterogeneous light conditions.
Źródło:
Dendrobiology; 2016, 76
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of permeability of glass-sand soil
Badanie przepuszczalności gleby piaszczysto-szklistej
Autorzy:
Wang, F. C.
Feng, X. N.
Gong, H.
Zhao, H. Y.
Powiązania:
https://bibliotekanauki.pl/articles/231018.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gleba piaszczysto-szklista
współczynnik przepuszczalności
proporcje
mieszanie szkła
stopień konsolidacji
glass-sand soil
permeability coefficient
proportions
glass mixing
consolidation degree
Opis:
The drainage consolidation method has been efficiently used to deal with soft ground improvement. Nowadays, it has been suggested to use a new sand soil which is a composite of sand and recycled glass waste. The permeability performance of glass-sand soil was explored to judge the feasibility of glass-sand soil backfilled in the drainage consolidation of sand-drained ground. For comparison purposes, different mix proportions of recycled glass waste, fineness modulus, and glass particle size were analyzed to certify the impact on the permeability coefficient and the degree of consolidation. The numerical results show that adding a proper amount of recycled glass waste could promote the permeability performance of glass-sand soil, and the glasssand soil drain could be consolidated more quickly than a sand drain. Experiments showed that glass-sand soil with the a 20% mix of recycled glass waste reveals the optimum performance of permeability.
W pracy omówiono nową mieszaninę gleby piaszczystej, która zawiera piasek i odpady pochodzące z recyklingu szkła. Skupiono się na wskaźniku przepuszczalności gleby piaszczysto-szklistej, aby ocenić wykonalność gleby piaszczystoszklistej w konsolidacji drenażu gruntu drenowanego piaskiem. Dla celów porównawczych przeprowadzono analizę różnych ilości zmieszanych odpadów pochodzących z recyklingu szkła, wskaźnika miałkości oraz wielkości cząstek szkła, aby potwierdzić wpływ na współczynnik przepuszczalności i stopień konsolidacji. Można przewidzieć, że dobra przepuszczalność części gleby zastąpionej szkłem w odpływie może przyspieszyć konsolidację drenażu fundamentu. Opracowano próbkę piasku przy użyciu piasku naturalnego o jednorodnym gatunku, z maksymalną wielkością nominalną wynoszącą 10 mm. W badaniu użyto pozostałości szkła laminowanego.
Źródło:
Archives of Civil Engineering; 2017, 63, 3; 175-190
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantitative processing of situation awareness for autonomous ships navigation
Autorzy:
Zhou, X. Y.
Liu, Z. J.
Wu, Z. L.
Wang, F. W.
Powiązania:
https://bibliotekanauki.pl/articles/117424.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
autonomous vessel
autonomous ship
autonomous ships navigation
situation awareness (SA)
quantitative processing
navigation safety
remotely controlled vessel
maritime unmanned navigation through intelligence in networks (MUNIN)
Opis:
The first ever attempt at fully autonomous dock-to-dock operation has been tested and demonstrated successfully at the end of 2018. The revolutionary shift is feared to have a negative impact on the safety of navigation and the getting of real-time situation awareness. Especially, the centralized context onboard could be changed to a distributed context. In navigation safety domain, monitoring, control, assessment of dangerous situations, support of operators of decision-making support system should be implemented in real time. In the context of autonomous ships, decision-making processes will play an important role under such ocean autonomy, therefore the same technologies should consist of adequate system intelligence. At the same time, situation awareness is the key element of the decision-making processes. Although there is substantial research on situation awareness measurement techniques, they are not suitable to directly execute quantitative processing for the situation awareness of autonomous ships navigation. Hence, a novel quantitative model of situation awareness is firstly proposed based on the system safety control structure of remotely controlled vessel. The data source is greatly limited, but the main result still indicates that the probability of operator lose adequate situation awareness of the autonomous ship is significantly higher than the conventional ship. Finally, the paper provides a probabilistic theory and model for high-level abstractions of situation awareness to guide future evaluation of the navigation safety of autonomous ships.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 1; 25-31
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
MGF360-12L of ASFV-SY18 is an immune-evasion protein that inhibits host type I IFN, NF-κB, and JAK/STAT pathways
Autorzy:
Chen, Q.
Wang, X.X.
Jiang, S.W.
Gao, X.T.
Huang, S.Y.
Liang, Y.
Jia, H.
Zhu, H.F.
Powiązania:
https://bibliotekanauki.pl/articles/16647496.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
African swine fever virus
MGF360-12L
type I IFN
NF-κB
JAK/STAT
Opis:
African swine fever virus (ASFV) causes feverous and hemorrhagic disease of domestic pigs and European wild boars with high mortality, yet no commercial vaccine is currently available. Several ASFV strains with natural deletion or gene-targeted knockout of multiple MGF360 and MGF505 genes are attenuated in vitro and in vivo, and can offer full protection against homologous challenge. However, the mechanisms underlying the protection are not fully understood. This study aims to investigate the effects of MGF360-12L of ASFV-SY18 on the cGAS-STING signaling pathway and explore the potential mechanisms. We identified that ASFV-SY18 MGF360-12L could inhibit cGAS-STING, TBK1, or IRF3-5D-stimulated IFN-β expression and ISRE activation. Specifically, MGF360-12L inhibits both the activation of PRD(III-I) in a dose-dependent manner, and suppresses the exogenous expression of TBK1 and IRF3-5D. MGF360-12L could block NF-κB activation induced by overexpression of cGAS-STING, TBK1, IKKβ. Downstream of the IFN-β signaling, MGF360-12L blocks the ISRE promoter activation by reducing total protein level of IRF9. Moreover, MGF360-12L protein can inhibit IFN-β-mediated antiviral effects. In conclusion, our findings suggest that MGF360-12L is a multifunctional immune-evasion protein that inhibits both the expression and effect of IFN-β, which could partially explain the attenuation of relevant gene-deleted ASFV strains, and shed light on the development of efficient ASFV live attenuated vaccines in the future.
Źródło:
Polish Journal of Veterinary Sciences; 2023, 26, 1; 119-130
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Catalytic oxidation of lignin to aromatics over salen-porphyrin complex as a biomimetic catalyst
Autorzy:
Lu, X.-J.
Zhou, X.-F.
Zhu, Z.-L.
Sun, Y.
Tang, K.
Lei, F.-H.
Liu, Z.-G.
Wang, T.
Powiązania:
https://bibliotekanauki.pl/articles/52771.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2019, 62, 203
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of synthesis conditions on the synthesis of carbon nanofibers by ethanol catalytic combustion
Wpływ warunków syntezy na syntezę nanowłókien węglowych metoda katalitycznego spalania etanolu
Autorzy:
Cheng, J.
Zou, X. P.
Zhu, G.
Wang, M. F.
Su, Y.
Yang, G. Q.
Lu, X. M.
Powiązania:
https://bibliotekanauki.pl/articles/354282.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
synteza
nanowłókna węglowe
spalanie
etanol
carbon nanofibers
ethanol catalytic combustion
influence factors
Opis:
In this paper, the effects of position of substrates in flames, preparation time, stability of flames and catalyst precursors on the synthesis of carbon nanofibers (CNFs) by ethanol catalytic combustion (ECC) were investigated. For investigating the effects of these influence factors on the synthesis of CNFs, several sets of controlled experiments were performed, such as preparation experiments with different position of substrates in flames, different preparation time, stable and unstable flames, and different catalyst precursors. In our experiments, the catalyst precursors were iron nitrate, cobalt nitrate, nickel nitrate, and iron chloride, cobalt chloride, nickel chloride. The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Our results indicate that the optimal position of substrates in flames is more than 1cm and less than 2.5cm, the optimal preparation time is more than 5min and less than 30min for massive yield, stable flames would be tent to synthesize CNFs with mainly single-type morphology and could improve the graphitization of CNFs, and the catalyst precursors obviously have effects on the synthesis of CNFs.
W niniejszej pracy zbadany został wpływ położenia substratów w płomieniach, czasu przygotowania, stabilności płomieni i prekursorów katalizatora na syntezę nanowłókien węglowych (CNFs) metodaą katalitycznego spalania etanolu (ECC). W celu zbadania wpływu tych czynników na syntezę nanowłókien węglowych przeprowadzono kilka zestawów kontrolowanych eksperymentów, przy różnej pozycji podłoży w płomieniach, różnym czasie przygotowania, płomieniach stabilnych i niestabilnych i przy użyciu różnych prekursorów katalizatora. W naszych eksperymentach jako prekursory katalizatora stosowano azotany: żelaza, kobaltu i niklu oraz chlorki żelaza, kobaltu i niklu. Tak otrzymane produkty syntezy scharakteryzowano za pomocą skaningowej mikroskopii elektronowej (SEM), transmisyjnej mikroskopii elektronowej (TEM) i spektroskopii Raman'a. Nasze wyniki wskazują, że optymalna pozycja podłoży w płomieniach to więcej niż 1 cm i mniej niż 2,5 cm, a optymalny czas przygotowania to więcej niż 5 min i mniej niż 30 min dla dużej wydajności. Stabilność płomieni będzie sprzyjać syntezie nanowłókien o morfologii jednego typu i może poprawić ich grafityzacje, a rodzaj prekursora katalizatora ma wpływ na syntezę nanowłókien.
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 3; 745-751
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Joint optimization of redundancy and maintenance staff allocation for multi-state series-parallel systems
Optymalizacja łączona alokacji nadmiarowości oraz alokacji pracowników służb utrzymania ruchu w wielostanowych systemach szeregowo-równoległych
Autorzy:
Liu, Y.
Huang, H. Z.
Wang, Z.
Li, Y. F.
Zhang, X. L.
Powiązania:
https://bibliotekanauki.pl/articles/301921.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
wielostanowe systemy szeregowo równoległe
zagadnienie alokacji nadmiarowości (RAP)
alokacja pracowników służb utrzymania ruchu
teoria kolejek
uniwersalna funkcja generacyjna (UFG)
algorytm świetlika (FA)
multi-state series-parallel systems
redundancy allocation problem (RAP)
maintenance staff allocation
queue theory
universal generation function (UGF)
firefly algorithm (FA)
Opis:
Multi-state system (MSS), as a kind of complex system consisting of elements with different performance levels, widely exists in engineering practices. In this paper, redundancy and maintenance staff allocation problems for repairable MSS with series-parallel configuration are considered simultaneously. The traditional redundancy allocation problem (RAP) for MSS always assumes that maintenance resources are unlimited. However in many practical situations, maintenance resources are limited due to the budget and/or time. To maximize the system availability under a certain demand, there are two feasible ways: (1) designing an optimal system configuration with available elements, and (2) allocating more maintenance staffs to reduce waiting time for repair. With the assistance of Markov queue model, the availabilities of identical version elements with the pre-assigned number of maintenance staffs can be evaluated. The universal generation function (UGF) is employed to assess the availability of entire MSS under a certain demand. Two optimization formulas considering the limited maintenance resources are proposed. One regards the limitation of maintenance resources as a constraint, and the other considers minimizing the total system cost including both the system elements and maintenance staff fees. The system redundancy and staffs allocation strategies are jointly optimized under required availability. A numerical case is presented to illustrate the efficiency of the proposed models. The Firefly Algorithm (FA), which is a recently developed metaheuristic optimization algorithm, is employed to seek the global optimal strategy.
Systemy wielostanowe (multi-state systems, MSS), stanowiące typ złożonych systemów zbudowanych z elementów o różnym poziomie wydajności, znajdują szerokie zastosowanie w praktyce inżynierskiej. W prezentowanej pracy podjęto rozważania łączące zagadnienia alokacji nadmiarowości oraz alokacji pracowników służb utrzymania ruchu w naprawialnych systemach MSS o konfiguracji szeregowo-równoległej. Tradycyjnie ujmowane zagadnienie alokacji nadmiarowości (redundancy allocation problem, RAP) w systemach MSS zawsze zakłada, że środki obsługi są nieograniczone. Jednakże w wielu sytuacjach praktycznych, środki obsługi mogą być ograniczone budżetem i/lub czasem. Istnieją dwa możliwe sposoby maksymalizacji gotowości systemu przy określonym zapotrzebowaniu użytkowników: (1) zaprojektowanie optymalnej konfiguracji systemu z wykorzystaniem dostępnych elementów oraz (2) alokowanie większej liczby pracowników obsługi w celu zmniejszenia czasu oczekiwania na naprawę. Dostępność jednakowych wersji elementów przy wcześniej określonej liczbie pracowników obsługi oceniano za pomocą modelu kolejek Markowa. Uniwersalną funkcję generacyjną (UGF) wykorzystano do oceny gotowości całego systemu MSS przy określonym zapotrzebowaniu. Zaproponowano dwa równania optymalizacyjne uwzględniające ograniczone środki obsługi. W jednym z nich ograniczoność środków obsługi potraktowano jako ograniczenie (constraint), natomiast drugie równanie dotyczyło minimalizacji całkowitych kosztów systemu włącznie z kosztami elementów systemu oraz płacą pracowników służb utrzymania ruchu. Strategie alokacji nadmiarowości systemu oraz alokacji pracowników poddano jednoczesnej optymalizacji z uwzględnieniem wymaganej gotowości. Wydajność proponowanych modeli zilustrowano przykładem numerycznym. Poszukiwania optymalnej strategii globalnej prowadzono przy pomocy niedawno opracowanego metaheurystycznego algorytmu optymalizacyjnego znanego jako algorytm świetlika (Firefly Algorithm, FA).
Źródło:
Eksploatacja i Niezawodność; 2012, 14, 4; 312-318
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficient sulfidization of lead oxide at high temperature using pyrite as vulcanizing reagent
Autorzy:
Zheng, Y.-X.
Lv, J.-F.
Wang, H.
Wen, S.-M.
Huang, L.
Powiązania:
https://bibliotekanauki.pl/articles/110351.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
lead oxide
sulfidization roasting
pyrite
reaction mechanism
TG
Opis:
A sulfidization roasting-flotation process was usually viewed to be effective in treating the refractory oxide ore. In this paper, pyrite was proposed to be applied as a potential vulcanizing reagent to transform PbO or its surface to PbS based on feasibilities of technology and economy. The evolution process, phase and characteristics of crystal growth were investigated by TG, XRD and SEM-EDS, respectively, to interpret the interaction mechanism of lead oxide and pyrite at high temperature. It was found that the decomposition process of pyrite under argon atmosphere was a slow process of sulfur released from FeS2 to FexS, which made the process easier to be controlled. When PbO was introduced into the system, the initial solid-solid (PbO-FeS2) reaction and prevailing solid-gas (PbO-S2(g)) reaction occurred at about 500 °C and 700 °C, respectively. Combined with the SEM-EDS analyses results, the optimal temperature for the sulfidization of PbO should be in the range of 700-750 °C.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 270-277
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ship recognition and tracking system for intelligent ship based on deep learning framework
Autorzy:
Liu, B.
Wang, S. Z.
Xie, Z. X.
Zhao, J. S.
Li, M. F.
Powiązania:
https://bibliotekanauki.pl/articles/117419.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
intelligent ship
deep learning framework
ship recognition system
ship tracking system
ship recognition and tracking system
intelligent navigation
autonomous ship
maritime safety
Opis:
Automatically recognizing and tracking dynamic targets on the sea is an important task for intelligent navigation, which is the prerequisite and foundation of the realization of autonomous ships. Nowadays, the radar is a typical perception system which is used to detect targets, but the radar echo cannot depict the target’s shape and appearance, which affects the decision-making ability of the ship collision avoidance. Therefore, visual perception system based on camera video is very useful for further supporting the autonomous ship navigational system. However, ship’s recognition and tracking has been a challenge task in the navigational application field due to the long distance detection and the ship itself motion. An effective and stable approach is required to resolve this problem. In this paper, a novel ship recognition and tracking system is proposed by using the deep learning framework. In this framework, the deep residual network and cross-layer jump connection policy are employed to extract the advanced ship features which help enhance the classification accuracy, thus improves the performance of the object recognition. Experimentally, the superiority of the proposed ship recognition and tracking system was confirmed by comparing it with state of-the-art algorithms on a large number of ship video datasets.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 4; 699-705
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda analizy niepewności oparta na połączeniu zasady maksymalnej entropii i metody oceny punktowej
Uncertainty analysis method based on a combination of the maximum entropy principle and the point estimation metod
Autorzy:
Zhang, X. L.
Huang, H. Z.
Wang, Z. L.
Xiao, N. C.
Li, Y. F.
Powiązania:
https://bibliotekanauki.pl/articles/301597.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
analiza niepewności
bootstrapping
momenty
zasada maksymalnej entropii
uncertainty analysis
moments
maximum entropy principle
Opis:
Niepewność jest nieodłącznym elementem procesów projektowania produktu. Dlatego też podejmowanie niezawodnych decyzji wymaga analizy niepewności, która uwzględniałaby wszystkie rodzaje niepewności. W praktyce inżynierskiej, z powodu niepełnej wiedzy, wyznaczenie rozkładu niektórych zmiennych projektowych nie jest możliwe. Co więcej, funkcja stanu granicznego jest wysoce nieliniowa, co sprawia, że do poprawnego obliczenia prawdopodobieństwa uszkodzenia potrzebna jest znajomość momentów wyższych rzędów tej funkcji. W niniejszej pracy zaproponowano metodę analizy niepewności łączącą zasadę maksymalnej entropii z metodą bootstrapową. W pierwszej części pracy wykorzystano metodę bootstrapową do obliczenia przedziałów ufności czterech pierwszych momentów dla zmiennych losowych typu mieszanego oraz zmiennych z próby. Następnie, wyznaczono momenty wyższych rzędów funkcji stanu granicznego przy użyciu metody redukcji wymiarów. Po trzecie, w celu obliczenia funkcji gęstości prawdopodobieństwa (PDF) oraz dystrybuanty (CDF) funkcji stanu granicznego, sformułowano model optymalizacji oparty na zasadzie maksymalnej entropii. Proponowana metoda nie wymaga założenia znajomości rozkładów zmiennych losowych ani obliczania wrażliwości dla funkcji stanu granicznego w odniesieniu do najbardziej prawdopodobnego punktu awarii. W końcowej części artykułu porównano na podstawie przykładów numerycznych wyniki otrzymane za pomocą proponowanej metody oraz symulacji Monte Carlo (MCS).
Uncertainty is inevitable in product design processes. Therefore, to make reliable decisions, uncertainty analysis incorporating all kinds of uncertainty is needed. In engineering practice, due to the incomplete knowledge, the distribution of some design variables can not be determined. Furthermore, the performance function is highly nonlinear, therefore, the high order moments of the performance function are needed to calculate the probability of failure accurately. In this paper, an uncertainty analysis method combining the maximum entropy principle and the bootstrapping method is proposed. Firstly, the bootstrapping method is used to calculate the confidence intervals of the first four moments for mixed random variables and sample variables. Secondly, the high order moments of limit state functions are estimated using the reduced dimension method. Thirdly, to calculate the probability density function (PDF) and cumulative distribution function (CDF) of the limit state functions, an optimization model based on the maximum entropy principle is formulated. In the proposed method, the assumptions that the distribution of the random variables are known and the calculation of the sensitivity for limit state function with respect to the Most Probable Point (MPP) are avoided. Finally, comparisons of results from the proposed methods and the MCS method are presented and discussed with numerical examples.
Źródło:
Eksploatacja i Niezawodność; 2012, 14, 2; 114-119
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of Ephedra species by phylogenetic analyses using matK and ITS1 sequences
Autorzy:
Zhao, Y.S.
Xie, L.X.
Mao, F.Y.
Cao, Z.
Wang, W.P.
Zhao, Q.P.
Zhang, X.H.
Powiązania:
https://bibliotekanauki.pl/articles/56673.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
In this study, the species identifications of seven Ephedra plants, including three medicinal plants from the Pharmacopoeia of the People’s Republic of China, were conducted using phylogenetic analyses, and the method’s validity was verified. The phylogenetic trees constructed from the maturase-coding gene (matK) and internal transcribed spacer 1 (ITS1) sequences showed that the former could be used for identifying five Ephedra plants, Ephedra intermedia, E. equisetina, E. antisyphilitica, E. major, and E. aphylla, but it had less power to discriminate E. sinica and E. przewalskii, while the latter could distinguish five Ephedra plants, E. przewalskii, E. equisetina, E. antisyphilitica, E. major, and E. aphylla, but it had less power to discriminate E. sinica and E. intermedia. However, when the two genes were combined, the seven species could be completely distinguished from each other, especially the medicinal plants from the others, which is significant in developing their pharmaceutical uses and in performing quality control assessments of herbal medicines. The method presented here could be applied to the analysis of processed Ephedra plants and to the identification of the botanical origins of crude drugs. Additionally, we discovered that E. equisetina and E. major were probably closely related to each other, and that E. sinica, E. intermedia, and E. przewalskii also had a close genetic relationship.
Źródło:
Acta Societatis Botanicorum Poloniae; 2016, 85, 2
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratory investigation of self-healing properties on geosynthetic clay liners with flaw
Autorzy:
Zhang, G.-W.
Zhang, H.-Y.
Wang, J.-F.
Zhou, L.
Liu, P.
Jiang, X.
Powiązania:
https://bibliotekanauki.pl/articles/204652.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
landfills
geosynthetic clay liner
self healing
hydraulic conductivity
Opis:
The objective of this paper is to evaluate the self- healing properties of a commercially-available geosynthetic clay liner (GCL) using flexible-wall permeameter. The GCLs are produced by the same factory, but the contents of bentonite are different. Also the hydraulic conductivities (HC) of GCLs with no defect are different. In this study, specimens were completely saturated under the backpressure of 20 kPa before the test. Permeability tests were performed on GCL specimens with penet rating flaw and also on specimens permeated with distilled water and CaCl2 solutions. The test results were presented and discussed. Experimental results showed that the GCL with penetrating flaw did not exhibit complete self-healing in the case of flaw. After 120 days, the hydraulic conductivity increased by approximately an order of magnitude. In addition, CaCl2 solutions had a significant influence on the hydraulic conductivity. The research findings might be of interest to researchers and engineers who design liners for landfills and other liquid containment facilities.
Źródło:
Archives of Environmental Protection; 2015, 41, 1; 53-58
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of organic supplementation to reduced rates of chemical fertilization on soil fertility of Zanthoxylum armatum
Autorzy:
Saba, T.
Liu, W.
Wang, J.
Saleem, F.
Kang, X.
Hui, W.
Gong, W.
Li, H.
Powiązania:
https://bibliotekanauki.pl/articles/2130175.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
fertilization
soil fertility
nutrient availability
organic manure
culturable microbes
Opis:
Soil acidification, fertility depletion, food insecurity, and environmental pollution all are consequences of the extensive use of chemical fertilizers (CF) in intensively managed plantations. Recent studies have shown that incorporating organic manure (OM) to partially replace CF can help to maintain productivity and soil health. There are no reports on integrated fertilizer management of Zanthoxylum armatum, for optimal ecological services and economic profitability. A pot experiment with Z. armatum was performed to investigate the possibility of incorporating OM in reducing CF use, enhancing soil fertility, and increasing plant growth. For this, seven treatments were designed: NPK, PK, NP, NK, OM, MNPK (50%NPK+50%OM), and control (CK, no fertilizer application). The results showed that NPK application significantly (P < 0.05) increased plant growth, soil nitrate-N, ammonium-N and available K compared to CK. However conventional CF application induced soil acidification. OM application raised the soil pH from 5.50 (CK) to 6.58 and significantly enhanced soil fertility by increasing alkali-hydrolysable N (2.3 times), ammonium-N (1.4 times), available P (4.3 times), the activity of invertase (1.5 times), catalase (2.8 times), acid phosphatase (1.5 times), and count of soil culturable microbes (2.9 times) compared to CK. Conversely, sole OM application did not result in optimum plant growth. Integrating OM with NPK (MNPK), on the other hand, not only provided the highest growth comprehensive value (0.84), but also substantially higher soil fertility comprehensive value (0.71) than traditional CF treatments. Correlation analysis also indicated a positive and significant correlation between soil microbes, enzyme activities and available nutrients. Therefore, OM+NPK could be an optimum measure to get maximum benefits regarding soil fertility, growth of Z. armatum, fertilizer savings and sustainable agroecology.
Źródło:
Dendrobiology; 2022, 87; 123-136
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of float-sink and progressive release flotation of ground products of coal middlings
Autorzy:
Xie, W.
He, Y.
Luo, C.
Zhang, X.
Li, H.
Yu, J.
Wang, H.
Shi, F.
Powiązania:
https://bibliotekanauki.pl/articles/109500.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal middlings
float-sink
progressive release flotation
XPS
EDX
Opis:
An additional recovery of coking coal middlings can be utilized for increasing of the concentrate yield of coking coal. A combined flow sheet of comminution and flotation can realize this target. To investigate the effect of grinding process on further flotation of ground products, progressive release flotation tests were used to compare with the float-sink tests, which were regarded as a criterion. Coal middlings were ground by wet-milling with iron balls to <0.5 mm. Curves of ash vs. cumulative yields of sized products indicated that the concentrate yield of coal separated by progressive release flotation was lower than that of coal benefited by the float-sink test, with the same ash for four size fractions (0.5-0.25 mm, 0.25-0.125 mm, 0.125-0.074 mm and <0.074 mm). Distributions of elements conducted by energy disperse spectroscopy (EDX) showed that associated kaolinite was liberated and exposed on the surface. It led to the shift of local surface property from hydrophobicity to hydrophilicity. Meanwhile, analyses of chemical property performed by an X-Ray photoelectron spectrometer (XPS) depicted that the hydrophilic mineral FeOOH, which generated in the grinding process, was adsorbed on the coal surface. Flotation of the ground products were worsened due to the increase of hydrophilicity of the coal surface.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 675-684
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustion Characteristics and Mechanism of Boron-based, Fuel-rich Propellants with Agglomerated Boron Powder
Autorzy:
Xu, H. -X.
Pang, W.-Q.
Guo, H.-W.
Zhao, F.-Q.
Wang, Y.
Sun, Z.-H.
Powiązania:
https://bibliotekanauki.pl/articles/358733.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
analytical chemistry
boron-based fuel-rich solid propellants
agglomerated boron powder
combustion performance
combustion mechanism
Opis:
In order to extend the burning rate of boron-based, fuel-rich solid propellants with agglomerated boron powder, the effects of the boron content, the AP content, and of the magnesium powder content, on the burning rate and pressure exponent have been studied systematically. It has been shown that when the AP content is constant, the burning rate of the propellants increases with an increase in the agglomerated boron content. Furthermore, the burning rate and pressure exponent increase with increasing the contents of AP and magnesium powder. By means of single colour frame amplification photography and combustion wave tests, the combustion mechanism of these propellants has been investigated. It has been shown that the flame of the propellants becomes brighter by increasing the AP content, the dT/dxcp and dT/dxgp of the propellant FR-5 being around 6815 and 5789 °C/mm respectively, higher than those of FR-4, resulting in greater burning rates. The Ts of these propellants is above 683 °C, which is higher than the decomposition peak temperatures of agglomerated boron powder and of propellants (about 649 °C), which indicates that agglomerated boron powder is partially oxidized on the combustion surface, and the heat released from it may be beneficial to the combustion of the propellants.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 4; 575-587
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Bending, Impact Fracture Behavior and Characteristics of Stainless Steel Clad Plates with Different Rolling Temperature
Autorzy:
An, Q.
Fan, K. Y.
Ge, Y. F.
Liu, B. X.
He, J.
Wang, S.
Chen, C. X.
Ji, P. G.
Tolochko, O.
Powiązania:
https://bibliotekanauki.pl/articles/2049433.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel clad plate
interface characteristics
bending behavior
impact morphologies
delamination crack
Opis:
The interface characteristics, bending and impact behavior, as well as fracture characteristics of stainless steel clad plates fabricated by vacuum hot rolling at different rolling temperatures of 1100°C, 1200°C and 1300°C are investigated in detail. The interface bonding strength is gradually increased with the increasing rolling temperature due to the sufficient diffusion behavior of alloy element. The bending toughness and impact toughness are gradually decreased, while the bending strength increase with the increase of the rolling temperature, which is attributed to mechanisms of matrix softening and interface strengthening at high rolling temperature. Due to the weak interface at 1100°C, the bending and impact crack propagation path was displaced by delamination cracks, which in turn lead to reduction in stress intensity of the main crack, playing an effective role in toughening the stainless steel clad plates. Moreover, the impact fracture morphologies of clad plates show a typical ductile-brittle transition phenomenon, which is attributed to the matrix softening behavior with the increasing rolling temperature.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 229-239
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Internal Friction of Li7La3Zr2O12 Based Lithium Ionic Conductors
Autorzy:
Wang, X. P.
Song, L.
Hu, J.
Xia, Y. P.
Xia, Y.
Gao, Y. X.
Zhang, L. C.
Magalas, L. B.
Fang, Q. F.
Powiązania:
https://bibliotekanauki.pl/articles/958222.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lithium ionic conductor
Li7La3Zr2O12
internal friction
Opis:
The diffusion mechanisms of lithium ions in tetragonal phase as well as in Al and Nb stabilized cubic Li7La3Zr2O12 compounds were investigated by low-frequency internal friction technique. In the cubic Li7La3Zr2O12 phase, a remarkable relaxation-type internal friction peak PC with a peak height up to 0.12 was observed in the temperature range from 15°C to 60°C. In the tetragonal phase however, the height of the PT peak dropped to 0.01. The obvious difference of the relaxation strength between the cubic and tetragonal phases is due to the different distribution of lithium ions in lattice, ordered in the tetragonal phase and disordered in the cubic phase. Based on the crystalline structure of the cubic garnet-type Li7La3Zr2O12 compound, it is suggested that the high internal friction peak in the cubic phase may be attributed to two diffusion processes of lithium ions: 96h↔96h and 96h↔24d.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 21-24
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructural Evolution in HMX Based Plastic-bonded Explosive During Heating and Cooling Process: an in situ Small-angle Scattering Study
Autorzy:
Yan, G.
Tian, Q.
Liu, J.
Fan, Z.
Sun, G.
Zhang, C.
Wang, Y.
Chen, B.
Gong, J.
Zhou, X.
Yang, Z.
Nie, F.
Li, J.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358618.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
SANS
SAXS
HMX-PBX
thermal damages
phase transition
Opis:
The thermal damage in octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based plastic-bonded explosive (PBX) was investigated using in situ small-angle neutron and X-ray scattering techniques. The microstructural evolution was quantitatively characterized by the model fitting parameters of total interfacial surface area (Sv) and void volume distribution. The Sv of HMX-PBX decreased markedly above 100 °C, indicating the movement of binder into the voids. After subsequent cooling to room temperature, the scattering intensity increased significantly with increasing storage time, and a new population of voids with average diameter of 20 nm was observed, accompanied by the gradual phase transition of HMX from δ- to β-phase. The experimental results implied that serious damage within the HMX-PBX was developed during storage after heating.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 916-926
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isolation and sequence analysis of the complete VP2 gene of canine parvovirus from Chinese domestic pets and determination of the pathogenesis of these circulating strains in beagles
Autorzy:
Chen, M.R.
Guo, X.Y.
Wang, Z.Y.
Jiang, Y.T.
Yuan, W.F.
Xin, T.
Hou, S.H.
Song, T.Q.
Lin, W.D.
Zhu, H.F.
Jia, H.
Powiązania:
https://bibliotekanauki.pl/articles/2087542.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
canine parvovirus
molecular epidemiology
phylogenetic analysis
pathogenesis
Źródło:
Polish Journal of Veterinary Sciences; 2019, 2; 287-296
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antibacterial spectrum of four compounds from yeasts in koumiss
Autorzy:
Chen, Y.J.
Du, C.G.
Guo, Y.Q.
Zhao, Y.F.
Aorigele, C.
Wang, C.J.
Simujide, H.
Aqima, W.
Zhang, X.Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087160.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Kluyveromyces marxianus
Saccharomyces cerevisiae
Escherichia coli
minimum inhibition concentration
minimum bactericidal concentration
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 2; 167-173
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rapid screening of monoclonal antibodies against porcine circovirus type 2 using colloidal gold-based paper test
Autorzy:
Jin, Q.Y.
Feng, L.L.
Wang, Y.B.
Li, P.
Yang, J.F.
Teng, M.
Chai, S.J.
Xing, G.X.
Zhang, G.P.
Powiązania:
https://bibliotekanauki.pl/articles/16539073.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
porcine circovirus type 2 (PCV2)
screening of MAbs
paper test
Opis:
A proof of concept for using paper test as a suitable method in the production of monoclonal antibodies (MAbs) is reported. The paper test which detects antibodies against porcine circovirus type 2 (PCV2) using colloidal gold-labelled capsid protein as the antigen probe was applied exclusively in the screening of anti-PCV2 MAbs. It allowed the detection of 118 single cell clones within 30 min using naked eyes. MAbs with specific binding to authentic epitopes on the virus were selected using a blocking strategy in which the antibody was pre-incubated with PCV2 viral sample before applying to the test paper. Five hybridomas secreting MAbs against the capsid protein were obtained, with only three of them capable of binding to PCV2. The results were validated and confirmed using enzyme-linked immunosorbent assay and immunofluorescence assay. The paper test is simple, rapid, and independent on professional technicians and proves to be an excellent approach for the screening of MAbs against specific targets.
Źródło:
Polish Journal of Veterinary Sciences; 2022, 25, 1; 27-34
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessing soil environmental capacity on different land uses in a suburban area of Chengdu, China
Autorzy:
Yang, W.-L.
Zhou, W.-Y.
Wan, W.-X.
Gou, S.-Z.
Zhang, J.
Deng, S.-H.
Shen, F.
Wang, Y.-J.
Yang, H.
Luo, L.
Powiązania:
https://bibliotekanauki.pl/articles/207670.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
China
soil pollution
heavy metals
soil
vegetables
Chiny
zanieczyszczenie gleby
metale ciężkie
gleba
warzywa
Opis:
Wenjiang (China) is the area which undertakes high-intensity planting activities. Additionally, the soil environmental capacity has been a hot area of research as it plays a key role in environmental protection planning, environmental impact assessment and sustainable development. In this paper, the static model of soil environmental capacity is employed to investigate the distribution of residual soil environmental capacity in Wenjiang. The results show that the soil environmental capacity of mercury is the largest for industrial land while it is the lowest in garlic-rice planting areas; the soil environmental capacity of arsenic is the largest in city construction land while it is the lowest in ecological conservation zone; the soil environmental capacity of lead is the largest in city construction land while it is the lowest in garlic-rice planting areas; and the soil environmental capacity of chromium is the largest in city construction land while it is the lowest in garlic-rice planting areas.
Źródło:
Environment Protection Engineering; 2019, 45, 2; 55-67
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-45 z 45

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies