Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, Rui" wg kryterium: Autor


Tytuł:
Using high level roadway to control gas emission in a longwall mining face – numerical simulation study
Autorzy:
Ma, Yongzhen
Cheng, Jianwei
Zhang, Rui
Wang, Zui
Ran, Dezhi
Sheng, Shuping
Zhang, Jufeng
Si, Junhong
Yu, Zhaoyang
Powiązania:
https://bibliotekanauki.pl/articles/2203351.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
symulacja numeryczna
wentylacja górnicza
kopalnia węgla
high level roadway
gob
numerical simulation
u+hLR ventilation method
Opis:
With the increase of coal mining depth, the gas content in coal seams could also become larger and larger, which could suddenly cause an inrush of gas into the longwall mining face. It is very dangerous for miners’ safety in the underground. The U-shaped ventilation pattern of longwall mining face that underground coal mines currently use is not enough to deliver sufficient air quantities to dilute gases in mining faces, which could result in the gas concentration over the required celling limit by government laws. Thus, the mine must stop production. In this paper, the high level roadway (HLR) is designed and the U + HLR new ventilation pattern is proposed to control gas emission in a longwall mining face. Using computational fluid dynamics simulation (CFD) software, the flow field and gas transportation in the mine gob are studied. The optimized ventilation parameters are summarized. It is found that the best vertical distance of the HLR is 35 m over the coal seam and the horizontal distance is 25 m from the air return roadway. It is recommended that the negative suction pressure design of the high level roadway should be ranged from 9000 Pa to 10000 Pa. Based on the study outcomes, the gas emission could be well controlled in mining faces and avoid any gas disaster accidents.
Źródło:
Archives of Mining Sciences; 2022, 67, 4; 715--728
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Risk assessment of tunnel portals in the construction stage based on fuzzy analytic hierarchy process
Autorzy:
Deng, Xianghui
Wang, Rui
Xu, Tian
Powiązania:
https://bibliotekanauki.pl/articles/230450.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
portal tunelu
etap budowy
proces rozmytej hierarchii analitycznej
FAHP
ocena ryzyka
tunnel portal
construction stage
fuzzy analytic hierarchy process
risk assessment
Opis:
This study presents a fuzzy analytic hierarchy process (FAHP) by integrating analytic hierarchy process (AHP) and fuzzy cognition to evaluate the construction risks of tunnel portals. Wuguanyi Tunnel is taken as the research objective to validate the performance of the proposed method. The result shows that the proposed decision making method can effectively identify risk factors and determine the risk level during the construction of tunnel portals. Finally, the corresponding control measures during the construction of the Wuguanyi Tunnel portal are proposed according to the risk assessment results.
Źródło:
Archives of Civil Engineering; 2018, 64, 4/I; 69-87
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on a novel hybrid shielding structure of magnetic coupler for inductive power transfer system
Autorzy:
Liu, Yun Rui
Wang, Chunfang
Xia, Dongwei
Yue, Rui
Powiązania:
https://bibliotekanauki.pl/articles/1841326.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
coupling coefficient
electromagnetic shielding
finite element simulation
optimization design
wireless power transfer
współczynnik sprzężenia
ekranowanie elektromagnetyczne
symulacja elementów skończonych
optymalizacja projektu
bezprzewodowy transfer mocy
Opis:
With the development of wireless power transfer technology, more and more attention has been paid to its electromagnetic safety. In this paper, a novel hybrid shielding structure composed of the innermost fan-shaped ferrite, the interlayer nanocrystalline stripand the outermost aluminum foil is proposed to shield the electromagnetic field of the inductive power transfer system. Eight structure parameters of the proposed shielding areoptimized by finite element simulation, in order to reduce the magnetic leakage of the system and improve the utilization rate of shielding materials. In addition, the proposed structure is compared with two types of typical double-layer hybrid shielding from the perspectives of the weight, the coupling coefficient and the magnetic flux leakage. Both simulation and experiment results show that the cost and weight of the proposed shield are about 60% lower than the traditional disk shield. More over, the shielding layer proposed in this paper can not only effectively reduce the magnetic flux leakage of the system, but also maintain a high coupling coefficient.
Źródło:
Archives of Electrical Engineering; 2021, 70, 1; 129-143
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of MCM-41 Supported Benzene Sulphonic Acid, a Catalyst for the Synthesis of CL-20 from TAIW
Autorzy:
Chen, Shixiong
Yang, Chaofei
Qian, Hua
Liu, Dabin
Kai, Wang
Li, Rui
Powiązania:
https://bibliotekanauki.pl/articles/358326.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
CL-20
catalytic
MCM-41
benzene sulphonic acid
TAIW
Opis:
Pure MCM-41 anchored benzene sulphonic acid (BSA/MCM-41), an efficient heterogeneous catalyst, was prepared for the synthesis of CL-20 from TAIW. The prepared catalysts were fully characterized by FTIR, XRD, TEM, TG, N2 adsorption techniques, elemental analysis and acidity tests. It was observed that the catalyst (BSA/MCM-41) retained the mesoporous structure like MCM-41, exhibited excellent thermal stability and high activity. Compared with a blank, the high catalytic activity promoted shorter reaction times by a factor of 3/5. In addition, this catalyst could be reused at least five times without significant loss of its catalytic potential. Moreover, the BSA/MCM-41 catalyst exhibited an optimal catalytic performance, with a high to excellent yield of CL-20 (92.5%) with a purity of 98.3%, under the optimum synthesis conditions.
Źródło:
Central European Journal of Energetic Materials; 2019, 16, 3; 343-359
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Performance of CL-20-based Ultraviolet-curable High-explosive Ink and Its Application in Rigid Explosive Networks by Direct Ink Writing
Autorzy:
Li, Rui
Li, Weibing
Guo, Xiaode
Liang, Li
Wang, Yajun
Li, Weibin
Powiązania:
https://bibliotekanauki.pl/articles/27787838.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
multi-point initiation explosive network
UV-curability highexplosive ink
direct ink writing/printing
initiation synchronicity error
precise press-loading charge
Opis:
To improve the groove charge consistency and density and to reduce the initiation synchronicity error of a rigid multi-point initiation explosive network, a CL-20-based ultraviolet (UV)-curable high-explosive ink, comprising 42 wt.% sub-micron CL-20, a 55.4 wt.% binder system (including 2.0 wt.% NC and 53.4 wt.% butyl acetate), and 2.6 wt.% UV-curable resin, based on direct ink writing (DIW) technology, was prepared. The properties of the composite sample deposited via DIW were characterized. The results indicated that the sample had good uniformity, with few defects, and a critical detonation size of around 1.5×0.283 mm. A six-point initiation explosive network was designed for the integration of DIW technology and precise press-loading of the charge. The network featured six pre-pressed booster pellets with the same charge density (ρ0 = 1.89 g·cm−3, 95.8% of theoretical maximum density) as the output end charges, and a groove channel charged by DIW and press-loading. This procedure increased the density of the booster charge in the groove channels to 1.890 g·cm−3, effectively improved the consistency of the charge density between the groove channels and the output ends and lowered the initiation synchronicity error of the network to 62 ns. The network can initiate a jetting projectile charge (JPC) with good shape and small lateral offset, implying that the network initiation capability and synchronization meet the operational requirements of JPC shaped charges.
Źródło:
Central European Journal of Energetic Materials; 2021, 18, 1; 86--111
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parameter identification of PMSM based on dung beetle optimization algorithm
Autorzy:
Yang, Xiaollang
Cui, Yuyue
Jia, Lianhua
Sun, Zhihong
Zhang, Peng
Zhao, Jiane
Wang, Rui
Powiązania:
https://bibliotekanauki.pl/articles/27309956.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
chaotic mapping
dung beetle algorithm
Levy flights
parameter identification
permanent magnet synchronous motor
spiral strategy
Opis:
In this paper, a creative dung beetle optimization (CDBO) algorithm is proposed and applied to the offline parameter identification of permanent magnet synchronous motors. First, in order to uniformly initialize the population state and increase the population diversity, a strategy to improve the initialization of the dung beetle population using Singer chaotic mapping is proposed to improve the global search performance; second, in order to improve the local search performance and enhance the convergence accuracy of the algorithm, a new dung beetle position update strategy is designed to increase the spatial search range of the algorithm. Simulation results show that the proposed optimization algorithm can quickly and accurately identify parameters such as resistance, inductance, and magnetic chain of the PMSM, with significant improvements in convergence algebra, identification accuracy and stability.
Źródło:
Archives of Electrical Engineering; 2023, 72, 4; 1055--1072
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of uncoupled and coupled TLP models
Autorzy:
Wang, Jianwei
Luo, Yuankui
Guo, Rui
Cai, Wei
Zhao, Jingyi
Luo, Xiongshuai
Powiązania:
https://bibliotekanauki.pl/articles/1955612.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
coupled TLP model
uncoupled TLP model
hydynamics
second-order wave force
offset and setdown
Opis:
In this paper, two analysis models for tension leg platform (TLP) are proposed based on different simulation methods of the tendons for studying the TLP motion responses in waves. In the uncoupled analysis model, the tendon is simplified as a spring, and the restoring forces matrix is derived with the consideration of the influence of the coupled effect of horizontal offset and vertical setdown of the platform. In the coupled model, the axial and transverse vibration’s coupled effect has been considered for the establishment of the vibration equations for the tendons, and the finite difference method is used to solve the vibration equations. The time-domain coupled motion model of the platform and the mooring system is established based on the interaction forces between the tendons and the platform. The coupled and uncoupled TLP models are compared and analysed to determine their applicability. Compared with the uncoupled TLP model, the coupled TLP model has greater accuracy and a wider application range, and the effects of second-order wave force on the platform responses, horizontal offset, and vertical subsidence are analysed.
Źródło:
Polish Maritime Research; 2021, 3; 44-60
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of a Bingham model of a magnetorheological damper considering stochastic uncertainties in their geometric variables
Autorzy:
Chen, Ke
Yu, Xiaopeng
Wang, Haishuo
Zheng, Hongmei
Zhang, Guojun
Wu, Rui
Powiązania:
https://bibliotekanauki.pl/articles/1839695.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
Bingham model
literature model
stochastic uncertainty theory
experimental verification
Opis:
Stochastic uncertainty theory is used to develop a new Bingham model of magnetorheological dampers superior to the existing model. Some input variables are defined as stochastic variables by the stochastic factor method, and the stochastic Bingham model is developed by the algebraic synthesis method. Curves of the damping force obtained by the stochastic Bingham model and the Bingham model in the literature are compared with experimental results, revealing that the curves obtained by the stochastic Bingham model are much closer to the experimental curves. Therefore, we confirm that the stochastic Bingham model is superior to the model from the literature.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 1; 53-65
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigating freeze-proof durability of air-entrained C30 recycled coarse aggregate concrete
Autorzy:
Deng, Xianghui
Liu, Yiyuan
Wang, Rui
Powiązania:
https://bibliotekanauki.pl/articles/1852544.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
domieszka napowietrzająca
kruszywo gruboziarniste
kruszywo z recyklingu
cykl zamrażanie-odmrażanie
mrozoodporność betonu
air-entraining admixture
recycled aggregate
coarse aggregate
concrete
freeze-thaw cycle
freeze-proof durability
Opis:
Incorporation of air-entraining agent has improved recycled concrete freeze-proof durability. However, it is very lacking to study the role of the entraining agent. In this paper, the influence of an air-entraining agent on freeze-proof durability for the ordinary C30 recycled coarse aggregate (RCA) concrete and air-entrained C30 RCA concrete was investigated with the laboratory comparative tests. The mass loss, the dynamic modulus of elasticity, ultrasonic wave velocity and cubic compressive strength were measured during freeze-thaw cycles. The test result showed the concrete’s performance was similar to the ordinary concrete and was better than that of other recycled concretes when the content of RCA was 50% and 0.03% of air-entraining agent was added for C30 RCA concrete. Meanwhile, the addition of air-entraining agent has an improved effect on the performance of recycled concrete, but the effect was limited.
Źródło:
Archives of Civil Engineering; 2021, 67, 2; 507-524
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Intergenerational Care, Intergenerational Support and Subjective Well-Being of the Elderly: An Empirical Study Based on CGSS (2017) Micro Data
Autorzy:
Shi, Huaping
Yu, Shengqi
Wang, Rui
Xiong, Xinnuo
Powiązania:
https://bibliotekanauki.pl/articles/22792647.pdf
Data publikacji:
2022-06-21
Wydawca:
Polskie Towarzystwo Socjologiczne
Tematy:
intergenerational care
intergenerational support
subjective well-being
mediating effect
Opis:
Using the micro data of Chinese General Social Survey (CGSS) in 2017, this paper analyzes the logical relationship between intergenerational care, intergenerational support and subjective well-being of the elderly. The study found that intergenerational care can significantly enhance the subjective well-being of the elderly, and there are age and income heterogeneity. Further analysis found that there is a partial mediating effect of intergenerational support in the effect of intergenerational care on the subjective well-being of the elderly. Based on this, it is necessary to build an elderly care service system that is coordinated by home-based community institutions and combined with medical care and health care, vigorously develop an inclusive nursery service system, establish and improve the nursery policy and mechanism, and promote the professional and standardized development of infant care services.
Źródło:
Polish Sociological Review; 2022, 218, 2; 187-206
1231-1413
2657-4276
Pojawia się w:
Polish Sociological Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of bonding condition on mechanical performance of synthetic sports surfaces by FEM
Autorzy:
Wang, Hong
Zheng, Weitao
Liu, Gan
Guo, Zhihao
Han, Rui
Li, Duo
Powiązania:
https://bibliotekanauki.pl/articles/2200836.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
bonding condition
synthetic sports surface
finite element method
Opis:
The purpose of the study was to evaluate the effect of interlayer bonding conditions on the mechanical performance of a synthetic sports track with time. A two-dimensional finite element model of the synthetic sports track was developed in order to calculate the track temperature stress and strain in thermal environmental conditions. Thermal and structural responses of the multi-layer sports ground were simulated using a transient thermal and structural analysis in one day. Based on that, different physical parameters of the interlayer were considered to analyze the influence of the bonding layer status on the potential damage of the surface layer in the sports track. The results indicated that different bonding conditions would affect the strain difference between the top and bottom of the synthetic sports layer, which might cause a weak mechanical performance of the synthetic sports layer. Finally, 2D finite element analysis was regarded to be a proper tool to simulate the transient thermal and mechanical behavior of the synthetic sports track. The suggested simulation model can predict the influence of bonding conditions on damage of the synthetic sports track, which can provide some guidance for engineers and technicians working on constructions of synthetic sports tracks.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 4; 637--647
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Freeze-proof durability of concrete incorporating recycled coarse aggregate
Autorzy:
Deng, Xianghui
Xue, Liyuan
Wang, Rui
Gao, Xiaoyue
Powiązania:
https://bibliotekanauki.pl/articles/231420.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kruszywo recyklingowe
kruszywo gruboziarniste
beton
cykl zamrażanie-odmrażanie
mrozoodporność
recycled aggregate
coarse aggregate
concrete
freeze-thaw cycle
freeze-proof durability
Opis:
The recycle of the building and demolition waste could reduce project expenses and save natural resources as well as solve problem about environmental risks incurred during the disposal of building waste. In this study, waste C30 concrete is taken an experimental material. The mass loss, ultrasonic velocity, dynamic modulus of elasticity and cubic compressive strength of recycled coarse aggregate concrete whose coarse aggregate replacement percentage is 25%, 50%, 75%, and 100% are tested and compared with NAC when the cycles of freezing and thawing are 0, 25, 50, 75, 100, 125, 150, 175, and 200 times. The results show: (1) Generally, the loss of mass, ultrasonic velocity, dynamic modulus of elasticity and cubic compressive strength constantly increase with the growth of freezing and thawing cycles. (2) Compared with the recycled concrete of other replacement percentages, the RAC50 shows relatively close performance to NAC in mass loss, the change of dynamic modulus of elasticity and cubic compressive strength. (3) Performances of RAC25 specimens are better than the other RAC specimens for the ultrasonic wave velocity.
Źródło:
Archives of Civil Engineering; 2019, 65, 4; 63-80
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Error analysis of the three-phase electrical energy calculation method in the case of voltage-loss failure
Autorzy:
Cheng, Han-miao
Wang, Zhong-dong
Cai, Qi-xin
Lu, Xiao-quan
Gao, Yu-xiang
Song, Rui-peng
Tian, Zheng-qi
Mu, Xiao-xing
Powiązania:
https://bibliotekanauki.pl/articles/221096.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
three-phase electrical energy meter
voltage-loss failure
voltage substitution
three-phase voltage unbalance
calculation error
Opis:
The single-phase voltage loss is a common fault. Once the voltage-loss failure occurs, the amount of electrical energy will not be measured, but it is to be calculated so as to protect the interest of the power supplier. Two automatic calculation methods, the power substitution and the voltage substitution, are introduced in this paper. Considering the lack of quantitative analysis of the calculation error of the voltage substitution method, the grid traversal method and MATLAB tool are applied to solve the problem. The theoretical analysis indicates that the calculation error is closely related to the voltage unbalance factor and the power factor, and the maximum calculation error is about 6% when the power system operates normally. To verify the theoretical analysis, two three-phase electrical energy metering devices have been developed, and verification tests have been carried out in both the lab and field conditions. The lab testing results are consistent with the theoretical ones, and the field testing results show that the calculation errors are generally below 0.2%, that is correct in most cases.
Źródło:
Metrology and Measurement Systems; 2019, 26, 3; 505-516
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chemical Information of Chitosan-Based Complex Extracted from Coincidence Doppler Broadening Spectra
Autorzy:
Cao, Xingzhong
Xia, Rui
Yang, Jing
Zeng, Minfeng
Wang, Baoyi
Yu, Runsheng
Wei, Long
Powiązania:
https://bibliotekanauki.pl/articles/1033908.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
64.70.km
82.30.Gg
Opis:
In recent years, coincidence Doppler broadening (CDB) of annihilation radiation measurement on polymeric system has been attracting special attention because of its unique elemental sensitivities in comparison to the traditional Doppler broadening measurement. In the present study, chitosan-Fe₃O₄ nanocomposite (CS-Fe₃O₄) and copper-chitosan (Cu-CS) complexes were prepared through a simple casting method from aqueous solution. The inclusion of Fe₃O₄ nanoparticles in the chitosan matrix is confirmed by X-ray diffraction. In order to obtain data about atomic composition of the annihilation site in the CS composites, CDB measurements were carried out. The normalized CDB ratio curve, which is related to the ratio between the momentum density distribution for the studied samples and pure CS, was displayed to illustrate the variation of ion cores of different elements present in the chitosan matrix. Our result confirms a contribution of active group available in chitosan molecules to the features in the high-momentum region of the CDB ratio curve. The findings show that the local chemical environment of the annihilation site in chitosan-based complexes could be estimated by such positron annihilation spectroscopic investigation.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1535-1537
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of a novel laccase purified from the fungus Hohenbuehelia serotina and its decolourisation of dyes
Autorzy:
Xu, Yingyin
Lu, Yuxiao
Zhang, Rui
Wang, Hexiang
Liu, Qinghong
Powiązania:
https://bibliotekanauki.pl/articles/1038810.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
Hohenbuehelia serotina
laccase
purification
decolouration
Opis:
A novel laccase was purified from the white rot fungus, Hohenbuehelia serotina, to investigate the applications of this laccase in the decoloration of various dyes. SDS-PAGE revealed a single band of this laccase corresponding to a molecular weight of approximately 57.8 kDa. The enzyme showed activity towards several substrates, the most sensitive of which was 2,2'-Azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS). The highest enzymatic activity using ABTS as a substrate was observed at pH 6.8 and 30°C. The enzyme activity was found to be significantly enhanced in the presence of Zn2+ ions and inhibited by Fe2+ ions. Moreover, SDS and β-mercaptoethanol were inhibitory, and inhibition by L-cysteine was observed while EDTA and DMSO had almost no inhibitory effect. The laccase could effectively decolorize seven different dyes within 30 minutes at 40°C.
Źródło:
Acta Biochimica Polonica; 2016, 63, 2; 273-279
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies