Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, Han" wg kryterium: Autor


Tytuł:
Adsorption of quaternary ammonium salt hydrophobic modifiers on the α-quartz (001) surface: a density functional theory study
Autorzy:
Liu, Chunfu
Wang, Weitao
Wang, Han
Zhu, Chenyu
Ren, Bao
Powiązania:
https://bibliotekanauki.pl/articles/24085768.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
α-quartz (001) surface
quaternary ammonium salt
density functional theory
adsorption mechanism
Opis:
To investigate the adsorption mechanism of quaternary ammonium salt on the α-quartz (001) surface, the adsorption models of hydrophobic modifiers 1231, 1431, 1631 and 1831 were constructed and simulated using the density functional theory (DFT). Results indicate that the adsorption energy of quaternary ammonium salt increases with the increase of carbon chain length, and the adsorption en-ergy reaches the maximum at 18 carbon atoms; however, the adsorption capacity of 1631 is weak owing to the carbon chain deflection. Based on the Mulliken bond population analysis, reagent 1831 has the strongest interaction with α-quartz (001) surface compared with 1231, 1431 and 1631; and during the adsorption process, charge transfer and electrostatic attraction occur between the reagent and α-quartz (001) surface with similar degrees of charge transfer observed. This study emphasizes that electrostatic attraction plays a key role in the adsorption process, while the week hydrogen bonding plays a second-ary role.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 3; art. no. 170260
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anonymous traffic classification based on three-dimensional Markov image and deep learning
Autorzy:
Tang, Xin
Li, Huanzhou
Zhang, Jian
Tang, Zhangguo
Wang, Han
Cai, Cheng
Powiązania:
https://bibliotekanauki.pl/articles/27311448.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
anonymous network
traffic classification
three-dimensional Markov image
output self-attention
deep learning
sieć anonimowa
klasyfikacja ruchu
trójwymiarowy obraz Markowa
samouwaga wyjściowa
uczenie głębokie
Opis:
Illegal elements use the characteristics of an anonymous network hidden service mechanism to build a dark network and conduct various illegal activities, which brings a serious challenge to network security. The existing anonymous traffic classification methods suffer from cumbersome feature selection and difficult feature information extraction, resulting in low accuracy of classification. To solve this problem, a classification method based on three-dimensional Markov images and output self-attention convolutional neural network is proposed. This method first divides and cleans anonymous traffic data packets according to sessions, then converts the cleaned traffic data into three-dimensional Markov images according to the transition probability matrix of bytes, and finally inputs the images to the output self-attention convolution neural network to train the model and perform classification. The experimental results show that the classification accuracy and F1-score of the proposed method for Tor, I2P, Freenet, and ZeroNet can exceed 98.5%, and the average classification accuracy and F1-score for 8 kinds of user behaviors of each type of anonymous traffic can reach 93.7%. The proposed method significantly improves the classification effect of anonymous traffic compared with the existing methods.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2023, 71, 4; art. no. e145676
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of ethanol-assisted mixing on the selected properties and homogeneity of NR/BR blends
Wpływ mieszania wspomaganego etanolem na wybrane właściwości i jednorodność mieszanek NR/BR
Autorzy:
Meng, Chao
Gu, Zheng
Sui, Jinyong
Wang, Jianfa
Li, Peiyao
Hu, Shaokai
Zhang, Susu
Zhang, Xiaoyi
Wang, Haoyu
Han, Shaolong
Yang, Zhifei
Powiązania:
https://bibliotekanauki.pl/articles/24202782.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
natural rubber
butadiene rubber
blends
dispersion
kauczuk naturalny
kauczuk butadienowy
mieszaniny
dyspersja
Opis:
The effect of the mixing method (normal and ethanol-assisted) on selected properties of natural rubber with butadiene rubber blends (NR/BR 80/20) was investigated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to evaluate the properties. In addition, the mechanical tensile properties, tear resistance and thermal aging, as well as vulcanization characteristic were determined. It was found that ethanol-assisted mixing can significantly improve the mechanical properties and thermal stability of the blends as a result of better dispersion of additives in the rubber matrix.
Zbadano wpływ metody mieszania (tradycyjna i wspomagana etanolem) na wybrane właściwości mieszanin kauczuku naturalnego z kauczukiem butadienowym (NR/BR 80/20). Do oceny właściwości zastosowano skaningową mikroskopię elektronową (SEM), spektroskopię w podczerwieni z transformacją Fouriera (FTIR) oraz analizę termograwimetryczną (TGA). Ponadto oznaczono właściwości mechaniczne przy rozciąganiu, odporność na rozdzieranie i starzenie termiczne, a także właściwości wulkanizacyjne. Stwierdzono, że mieszanie wspomagane etanolem może znacząco poprawić właściwości mechaniczne i stabilność termiczną mieszanin NR/BR, jako efekt lepszej dyspersji dodatków w osnowie gumowej.
Źródło:
Polimery; 2023, 68, 3; 142--148
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of simultaneous recovering of Au and Ag from CTs by chloridizing volatilization methods
Autorzy:
Weiwei, Wang
Zhengyao, Li
Shanshan, Yang
Kai, Ma
Xin, Gao
Shaoqi, Han
Shaochun, Hou
Hecheng, Miao
Powiązania:
https://bibliotekanauki.pl/articles/27323663.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cyanide tailings
chloridizing volatilization
gold
silver
kinetics
Opis:
Cyanide Tailings (CTs) are known as hazardous resources that accumulate hundreds of millions of tons, threatening the ecological environment. This work proposes an eco-friendly and efficient way to recover gold and silver from CTs. The effects of calcium chloride dosage, silicon dioxide dosage, pellet moisture content, roasting temperature, and roasting time on Au and Ag chloridizing volatilization were studied. The kinetics of simultaneously recovering of gold and silver from cyanide Tailings by chlorination roasting was investigated. It was determined that the chloridizing volatilization rates increased with increasing calcium chloride dosage, temperature and decreasing silicon dioxide dosage, pellet moisture content. The chloridizing volatilization kinetics followed a shrinking core model, with inter-diffusion through gangue layer as the rate determining step. This finding is in accordance with the apparent activation energy (Ea) of 24.01 kJ•mol-1 (Au) and 24.62 kJ•mol-1 (Ag). The orders of reaction with respect to moisture content, temperature, calcium chloride dosage and silicon dioxide dosage were also achieved. The rate of reaction based on diffusion-controlled process can be expressed by semi-empirical equations. The control steps of the gold and silver recovery process were investigated by the kinetic study, which provided theoretical guidance for the optimization of the method.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 172522
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical properties of CFST short columns with different void ratios
Autorzy:
Song, Junxi
Han, Zhuowei
Wang, Dawei
Lu, Xiaorui
Powiązania:
https://bibliotekanauki.pl/articles/27312159.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
rura stalowa wypełniona betonem
ściskanie mimośrodowe
analiza elementów skończonych
zachowanie mechaniczne
stosunek
pustka powietrzna
concrete-filled steel tube
eccentric compression
finite element analysis
mechanical behavior
void ratio
Opis:
In order to study the mechanical behavior of concrete-filled steel tube(CFST) short column with different void ratios under a certain eccentricity. A fiber model of concrete-filled steel tube section with different void heights was established. Compared with existing model test data, the axial force and flexural moment strength models of concrete-filled steel tube columns with different void ratios were established. The results show that, in the case of different void ratios, the cross-section strength envelope shows an overall contraction tendency with the increase of void ratio, and each line is basically parallel. A model for calculating the coefficient of axial load degradation was established. The Han’s flexural moment strength model of the flexural component was revised, and the strength model of concrete-filled steel tube column under eccentric compression considering void ratio was established, which provides a theoretical basis and method for the safety assessment during the operation of concrete-filled steel tube arch bridges.
Źródło:
Archives of Civil Engineering; 2023, 69, 3; 587--596
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modification of photosensitive resin with fumed silica
Modyfikacja żywicy światłoczułej krzemionką płomieniową
Autorzy:
Zhao, Jie
Song, Tao
Chu, Wei
Wang, Yingying
Bi, Lunan
Han, Zhuoqun
Li, Ling
Powiązania:
https://bibliotekanauki.pl/articles/24202825.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
photocuring
3D printing
photosensitive resin
fumed silica
fotoutwardzanie
druk 3D
żywica światłoczuła
krzemionka płomieniowa
Opis:
The effect of fumed silica (3 and 5 wt%) on the structure, viscosity, tensile and flexural pro-perties, and hardness of photosensitive acrylic resins used for 3D printing was investigated. The op-timal set of functional properties was obtained with a silica content of 3 wt%. In this case, the resin had the appropriate viscosity, degree of cross-linking, hardness (90 ShD), tensile strength (47 MPa) and flexural strength (96 MPa). The obtained results indicate that the addition of silica effectively reinforce the resin.
Zbadano wpływ krzemionki płomieniowej (3 i 5% mas.) na strukturę, lepkość właściwości mechaniczne przy rozciąganiu i zginaniu oraz twardość światłoczułych żywic akrylowych stosowanych do druku 3D. Optymalny zespół właściwości użytkowych uzyskano przy zawartości krzemionki 3% mas. W tym przypadku żywica miała odpowiednią lepkość, stopień usieciowania, twardość (90 ShD), wytrzymałość na rozciąganie (47 MPa) i wytrzymałość na zginanie (96 MPa). Uzyskane wyniki wskazują, że dodatek krzemionki skutecznie wzmacnia żywicę.
Źródło:
Polimery; 2023, 68, 5; 264--268
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parameter identification approach using improved teaching and learning based optimization for hub motor considering temperature rise
Autorzy:
Li, Yong
Wang, Yuan
Zhang, Taohua
Hu, Han
Wu, Hao
Powiązania:
https://bibliotekanauki.pl/articles/2203368.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
parameters identification
teaching–learning-based optimization
hub motor
temperature rise
Opis:
Temperature rise of the hub motor in distributed drive electric vehicles (DDEVs) under long-time and overload operating conditions brings parameter drift and degrades the performance of the motor. A novel online parameter identification method based on improved teaching-learning-based optimization (ITLBO) is proposed to estimate the stator resistance, -axis inductance, -axis inductance, and flux linkage of the hub motor with respect to temperature rise. The effect of temperature rise on the stator resistance, -axis inductance, -axis inductance, and magnetic flux linkage is analysed. The hub motor parameters are identified offline. The proposed ITLBO algorithm is introduced to estimate the parameters online. The Gaussian perturbation function is employed to optimize the TLBO algorithm and improve the identification speed and accuracy. The mechanisms of group learning and low-ranking elimination are established. After that, the proposed ITLBO algorithm for parameter identification is employed to identify the hub motor parameters online on the test bench. Compared with other parameter identification algorithms, both simulation and experimental results show the proposed ITLBO algorithm has rapid convergence and a higher convergence precision, by which the robustness of the algorithm is effectively verified.
Źródło:
Metrology and Measurement Systems; 2023, 30, 1; 99--115
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Shear properties of a honeycomb structure with zero Poisson’s ratio
Autorzy:
Song, L.
Sun, Y.
Han, Z.
Wang, T.
Wang, H.
Yin, C.
Shen, X.
Powiązania:
https://bibliotekanauki.pl/articles/38697109.pdf
Data publikacji:
2023
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
honeycomb structure
zero Poisson’s ratio
shear properties
small deformation
large deformation
Opis:
Honeycomb structures with zero Poisson’s ratio show promising potential for application in variable-sweep wing aircraft. The shear properties of these honeycomb structures serve as a crucial indicator of their morphing capacity. This paper derives the linear and non-linear shear properties of a honeycomb structure with zero Poisson’s ratio. A modified factor is introduced to establish a relationship between the linear and non-linear shear modulus of the honeycomb structure, simplifying the calculation method of the non-linear shear modulus. The validity of theoretical predictions is then confirmed using the finite element method Furthermore, the influences of the geometric parameters on the shear properties of the honeycomb structure with zero Poisson’s ratio are investigated, highlighting the varying contributions of these cell geometric parameters to the shear properties.
Źródło:
Archives of Mechanics; 2023, 75, 5; 521-541
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the cracking mechanisms in pre-cracked sandstone under radial compression by moment tensor analysis of acoustic emissions
Autorzy:
Wang, Guozhu
Luo, Xulin
Song, Lei
Wang, Yu
Han, Mouwang
Song, Zhaocun
Wu, Linjun
Wang, Zukun
Powiązania:
https://bibliotekanauki.pl/articles/2174031.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
emisja akustyczna
mechanizm pękania
tensor momentu
piaskowiec wstępnie spękany
kompresja promieniowa
acoustic emission
cracking mechanism
moment tensor
pre-cracked sandstone
radial compression
Opis:
Rock masses, especially those with different pre-existing cracks, are prone to instability and failure under tensile loading, resulting in different degrees of engineering disasters. Therefore, to better understand the effect of pre-existing cracks with different dip angles on the tensile instability failure behaviour of rocks, the mechanism of crack initiation, propagation and coalescence in precracked sandstone under radial compression loading is investigated through numerical simulations. The temporal and spatial evolution of acoustic emission (AE) events is investigated by the moment tensor (MT), and the fracture mode of micro-cracks is determined. The results show that the pre-existing cracks weaken the specimens. The strength, crack initiation points and macro-failure modes of the specimens differ significantly depending on the dip angle of the pre-existing crack. For different dip angles of the pre-existing cracks, all the micro-cracks at the crack initiation point are tensile cracks, which are dominant during the whole loading process, and mixed cracks are mainly generated near the upper and lower loading ends after the peak stress. Of the total number of events, more than 75% are tensile cracks; approximately 15% are shear mode cracks; and the remainder consist of mixed mode cracks. The study reveals the instability and failure mechanism of pre-cracked rock, which is of great significance to ensure the long-term stability of rock mass engineering.
Źródło:
Archives of Civil Engineering; 2022, 68, 3; 447--468
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Annealing Treatment on Deep Drawing Behavior of Q235 Carbon Steel /410/304 Stainless Steels Three-Layer Composite Plate
Autorzy:
Lv, Zehua
Zhang, Zhixiong
Han, Jianchao
Wang, Tao
Powiązania:
https://bibliotekanauki.pl/articles/2106574.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite plate
deep drawing
annealing
microstructure
Opis:
Effect of annealing treatment on deep drawing behavior of hot-rolled Q235 carbon steel/410/304 stainless steel three-layer composite plate was investigated. Deep drawability of the unannealed composite plates exhibits a sharp difference for various contact surfaces with the die. The limit drawing ratio (LDR) of the composite plate with the carbon steel contacting the die is 1.75, while it is 1.83 with the stainless steel contacting the die due to the different mechanical responses to the tensile stress at the corner of the die. After annealing at 900°C for 2 h, however, the deep drawabilities of the composite plates both for various contact surfaces with the die are significantly improved and becomes almost identical, which are attributed to the stress relief, the enhanced ductility and the improved interface bonding strength of the hot-rolled component plates during annealing.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 2; 421--433
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of bonding condition on mechanical performance of synthetic sports surfaces by FEM
Autorzy:
Wang, Hong
Zheng, Weitao
Liu, Gan
Guo, Zhihao
Han, Rui
Li, Duo
Powiązania:
https://bibliotekanauki.pl/articles/2200836.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
bonding condition
synthetic sports surface
finite element method
Opis:
The purpose of the study was to evaluate the effect of interlayer bonding conditions on the mechanical performance of a synthetic sports track with time. A two-dimensional finite element model of the synthetic sports track was developed in order to calculate the track temperature stress and strain in thermal environmental conditions. Thermal and structural responses of the multi-layer sports ground were simulated using a transient thermal and structural analysis in one day. Based on that, different physical parameters of the interlayer were considered to analyze the influence of the bonding layer status on the potential damage of the surface layer in the sports track. The results indicated that different bonding conditions would affect the strain difference between the top and bottom of the synthetic sports layer, which might cause a weak mechanical performance of the synthetic sports layer. Finally, 2D finite element analysis was regarded to be a proper tool to simulate the transient thermal and mechanical behavior of the synthetic sports track. The suggested simulation model can predict the influence of bonding conditions on damage of the synthetic sports track, which can provide some guidance for engineers and technicians working on constructions of synthetic sports tracks.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 4; 637--647
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of polysorbate 80 on the flotation of zinc oxide ores with amines
Autorzy:
Xie, Qiaoling
Wang, Dandan
Han, Zhichao
Tao, Huchun
Liu, Sitong
Powiązania:
https://bibliotekanauki.pl/articles/2146852.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
polysorbate 80
pretreated amines
zinc oxide
flotation
Opis:
In this study, the influence of polysorbate 80 on zinc oxide flotation was investigated with an amine collector. The results indicated that the pretreatment of amines with polysorbate 80 enhanced the Zn grade and recovery obtained using zinc oxide flotation. Desliming prior to flotation is not suggested based on the results of this study. The appropriate temperature for flotation was as low as 8 °C, and this flotation method also could be applied to different types of zinc oxide ores. Under optimum flotation conditions, a concentrate with a Zn grade of 48.34% and a Zn recovery of 95.97% was obtained.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 1; 149--158
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the Content of Nickel Powders on the Electromagnetic Properties of SingleLayer Coated Polyester-Cotton Plain Weave Fabric
Autorzy:
Liu, Yuanjun
Xue, Huangyu
Wang, Ciyi
Han, Xiaohui
Zhao, Xiaoming
Powiązania:
https://bibliotekanauki.pl/articles/2200762.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
nickel powder
coating
polyester fabric
cotton fabric
plain weave fabric
dielectric constant
reflection loss
shielding effectiveness
Opis:
A coated composite was prepared on polyester-cotton plain weave fabric, using PU2540 polyurethane as the matrix. The influences of the content of nickel powders on the dielectric constant (the real and imaginary parts and loss tangent value), reflection loss and shielding effectiveness of single-layer coated composites were mainly investigated. The results showed that within the frequency range of 1-1000 MHz, the value of the real part of the dielectric constant of the coated composites was the largest, and the polarisation ability with regard to electromagnetic waves was the strongest when the content of nickel powders was 40%. Within the frequency range of 15-225 MHz, the value of the imaginary part of the dielectric constant of the coated composites was the largest and the loss ability with regard to electromagnetic waves was the strongest when the content of nickel powders was 40%. Within the frequency range of 250-800 MHz, the loss tangent value of the dielectric constant of coated composites was the largest, and the attenuation ability with regard to electromagnetic waves was the strongest when the content of nickel powders was 40%. Within the frequency range of 1220-3000 MHz, the reflection loss value was the smallest when the content of nickel powders was 40%, and its absorption ability with regard to electromagnetic waves was the strongest. Within the frequency range of 760-3000 MHz, the shielding effectiveness of the coated composite was the largest when the content of nickel powders was 40%.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 5 (151); 47--52
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Man-algorithm Cooperation Intelligent Design of Clothing Products in Multi Links
Autorzy:
Han, Chen
Lei, Shen
Shaogeng, Zhang
Mingming, Wang
Ying, Tang
Powiązania:
https://bibliotekanauki.pl/articles/2056307.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
intelligent algorithm
cooperation
clothing design
machine learning
efficiency
Opis:
The changes in technology have led to a synchronous change in the clothing design method, as well as media and artistic aesthetics in the same period. The intelligence algorithm is constantly increasing its participation in development and production in the clothing industry. In this study, a variety of intelligent algorithms, including the parameterised numer state algorithm, Generative Adversarial Networks, and style transfer were introduced into the multi-links of clothing product design and development, such as clothing shape, print pattern, texture craft, product vision, and so on. Then, an innovative clothing design method based on the cooperation of the intelligent algorithm and various human functional roles was constructed. The method improves the efficiency of the multiple links of clothing design, such as generating 10000 printing patterns every 72.12 seconds, and completing the migration of 92.7 frames of the garment process style every second. To a certain extent, this study realizes the scale economy of clothing design and reduces its marginal cost through the unlimited computing power brought about by Moore’s law of digital technology, which provides a reference for the exploration of clothing design in the era of industry 4.0.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 1 (151); 59--66
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of heavy haul railway tunnel lining based on ultimate bearing capacity
Autorzy:
Han, Wei
Xiao, Taoli
Shi, Duanwen
Wang, Yupeng
Powiązania:
https://bibliotekanauki.pl/articles/2174091.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The optimization process of design parameters for composite lining of heavy haul railway tunnel is a key problem to be solved in tunnel engineering design. In order to put forward a better design scheme of composite lining for heavy haul railway tunnel, combined with field measurement and numerical simulation, the optimal working condition design is carried out by changing the thickness of shotcrete layer, the type of grid steel frame and the thickness of secondary lining. The influence of the above design parameters on the stress state of the composite lining is analyzed to obtain the optimal design parameters. Finally, the safety performance of the optimized lining is evaluated by the ultimate bearing capacity curve of the secondary lining section. The research shows that: 1) The optimal design parameters of the composite lining of the tunnel are the thickness of the shotcrete layer of 25 cm, the type of the grid steel frame of H180, the thickness of the secondary lining arch waist and the side wall of 40 cm and 35 cm respectively; 2) Different from the single-track heavy haul railway tunnel, the displacement value of the vault settlement of the double-track heavy haul railway tunnel is significantly greater than that of the inner convergence. Increasing the thickness of the shotcrete layer and changing the type of the grid steel frame have better effects on reducing the vault settlement, and have little effect on the inner convergence.
Źródło:
Archives of Civil Engineering; 2022, 68, 4; 493--511
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies